// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error AddressInsufficientBalance(address account);
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedInnerCall();
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert AddressInsufficientBalance(address(this));
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert FailedInnerCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {FailedInnerCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert AddressInsufficientBalance(address(this));
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
* unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {FailedInnerCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert FailedInnerCall();
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
/**
* @title BCoWConst
* @notice Constants used in the scope of the BCoWPool contract.
*/
contract BCoWConst {
/**
* @notice The largest possible duration of any AMM order, starting from the
* current block timestamp.
* @return _maxOrderDuration The maximum order duration.
*/
uint32 public constant MAX_ORDER_DURATION = 5 minutes;
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
/*
Coded for Balancer and CoW Swap with ♥ by
░██╗░░░░░░░██╗░█████╗░███╗░░██╗██████╗░███████╗██████╗░██╗░░░░░░█████╗░███╗░░██╗██████╗░
░██║░░██╗░░██║██╔══██╗████╗░██║██╔══██╗██╔════╝██╔══██╗██║░░░░░██╔══██╗████╗░██║██╔══██╗
░╚██╗████╗██╔╝██║░░██║██╔██╗██║██║░░██║█████╗░░██████╔╝██║░░░░░███████║██╔██╗██║██║░░██║
░░████╔═████║░██║░░██║██║╚████║██║░░██║██╔══╝░░██╔══██╗██║░░░░░██╔══██║██║╚████║██║░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝██║░╚███║██████╔╝███████╗██║░░██║███████╗██║░░██║██║░╚███║██████╔╝
░░░╚═╝░░░╚═╝░░░╚════╝░╚═╝░░╚══╝╚═════╝░╚══════╝╚═╝░░╚═╝╚══════╝╚═╝░░╚═╝╚═╝░░╚══╝╚═════╝░
https://defi.sucks
*/
import {BCoWConst} from './BCoWConst.sol';
import {BPool} from './BPool.sol';
import {GPv2Order} from '@cowprotocol/libraries/GPv2Order.sol';
import {IERC1271} from '@openzeppelin/contracts/interfaces/IERC1271.sol';
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import {SafeERC20} from '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {IBCoWFactory} from 'interfaces/IBCoWFactory.sol';
import {IBCoWPool} from 'interfaces/IBCoWPool.sol';
import {ISettlement} from 'interfaces/ISettlement.sol';
/**
* @title BCoWPool
* @notice Pool contract that holds tokens, allows to swap, add and remove liquidity.
* @dev Inherits BPool contract functionalities, and can trade on CoW Swap Protocol.
*/
contract BCoWPool is IERC1271, IBCoWPool, BPool, BCoWConst {
using GPv2Order for GPv2Order.Data;
using SafeERC20 for IERC20;
/// @inheritdoc IBCoWPool
address public immutable VAULT_RELAYER;
/// @inheritdoc IBCoWPool
bytes32 public immutable SOLUTION_SETTLER_DOMAIN_SEPARATOR;
/// @inheritdoc IBCoWPool
ISettlement public immutable SOLUTION_SETTLER;
/// @inheritdoc IBCoWPool
bytes32 public immutable APP_DATA;
constructor(
address cowSolutionSettler,
bytes32 appData,
// solhint-disable-next-line no-unused-vars
string memory name,
// solhint-disable-next-line no-unused-vars
string memory symbol
) BPool(name, symbol) {
SOLUTION_SETTLER = ISettlement(cowSolutionSettler);
SOLUTION_SETTLER_DOMAIN_SEPARATOR = ISettlement(cowSolutionSettler).domainSeparator();
VAULT_RELAYER = ISettlement(cowSolutionSettler).vaultRelayer();
APP_DATA = appData;
}
/// @inheritdoc IBCoWPool
function commit(bytes32 orderHash) external _viewlock_ {
if (msg.sender != address(SOLUTION_SETTLER)) {
revert CommitOutsideOfSettlement();
}
_setLock(orderHash);
}
/**
* @inheritdoc IERC1271
* @dev this function reverts if the order hash does not match the current commitment
*/
function isValidSignature(bytes32 orderHash, bytes memory signature) external view returns (bytes4 magicValue) {
(GPv2Order.Data memory order) = abi.decode(signature, (GPv2Order.Data));
if (order.appData != APP_DATA) {
revert AppDataDoesNotMatch();
}
bytes32 orderHash_ = order.hash(SOLUTION_SETTLER_DOMAIN_SEPARATOR);
if (orderHash_ != orderHash) {
revert OrderDoesNotMatchMessageHash();
}
if (orderHash_ != _getLock()) {
revert OrderDoesNotMatchCommitmentHash();
}
verify(order);
// A signature is valid according to EIP-1271 if this function returns
// its selector as the so-called "magic value".
magicValue = this.isValidSignature.selector;
}
/// @inheritdoc IBCoWPool
function verify(GPv2Order.Data memory order) public view virtual {
Record memory inRecord = _records[address(order.buyToken)];
Record memory outRecord = _records[address(order.sellToken)];
if (!inRecord.bound || !outRecord.bound) {
revert BPool_TokenNotBound();
}
if (order.receiver != GPv2Order.RECEIVER_SAME_AS_OWNER) {
revert BCoWPool_ReceiverIsNotBCoWPool();
}
if (order.validTo > block.timestamp + MAX_ORDER_DURATION) {
revert BCoWPool_OrderValidityTooLong();
}
if (order.feeAmount != 0) {
revert BCoWPool_FeeMustBeZero();
}
if (order.kind != GPv2Order.KIND_SELL) {
revert BCoWPool_InvalidOperation();
}
if (order.buyTokenBalance != GPv2Order.BALANCE_ERC20 || order.sellTokenBalance != GPv2Order.BALANCE_ERC20) {
revert BCoWPool_InvalidBalanceMarker();
}
uint256 buyTokenBalance = order.buyToken.balanceOf(address(this));
if (order.buyAmount > bmul(buyTokenBalance, MAX_IN_RATIO)) {
revert BPool_TokenAmountInAboveMaxRatio();
}
uint256 tokenAmountOut = calcOutGivenIn({
tokenBalanceIn: buyTokenBalance,
tokenWeightIn: inRecord.denorm,
tokenBalanceOut: order.sellToken.balanceOf(address(this)),
tokenWeightOut: outRecord.denorm,
tokenAmountIn: order.buyAmount,
swapFee: 0
});
if (tokenAmountOut < order.sellAmount) {
revert BPool_TokenAmountOutBelowMinOut();
}
}
/**
* @inheritdoc BPool
* @dev Grants infinite approval to the vault relayer for all tokens in the
* pool after the finalization of the setup. Also emits COWAMMPoolCreated() event.
*/
function _afterFinalize() internal override {
uint256 tokensLength = _tokens.length;
for (uint256 i; i < tokensLength; i++) {
IERC20(_tokens[i]).forceApprove(VAULT_RELAYER, type(uint256).max);
}
// Make the factory emit the event, to be easily indexed by off-chain agents
// If this pool was not deployed using a bCoWFactory, this will revert and catch
// And the event will be emitted by this contract instead
// solhint-disable-next-line no-empty-blocks
try IBCoWFactory(FACTORY).logBCoWPool() {}
catch {
emit IBCoWFactory.COWAMMPoolCreated(address(this));
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
/**
* @title BConst
* @notice Constants used in the scope of the BPool contract.
*/
contract BConst {
/// @notice The unit of precision used in the calculations.
uint256 public constant BONE = 10 ** 18;
/// @notice The minimum number of bound tokens in a pool.
uint256 public constant MIN_BOUND_TOKENS = 2;
/// @notice The maximum number of bound tokens in a pool.
uint256 public constant MAX_BOUND_TOKENS = 8;
/// @notice The minimum swap fee that can be set.
uint256 public constant MIN_FEE = BONE / 10 ** 6;
/// @notice The maximum swap fee that can be set.
uint256 public constant MAX_FEE = BONE - MIN_FEE;
/// @notice The immutable exit fee percentage
uint256 public constant EXIT_FEE = 0;
/// @notice The minimum weight that a token can have.
uint256 public constant MIN_WEIGHT = BONE;
/// @notice The maximum weight that a token can have.
uint256 public constant MAX_WEIGHT = BONE * 50;
/// @notice The maximum sum of weights of all tokens in a pool.
uint256 public constant MAX_TOTAL_WEIGHT = BONE * 50;
/// @notice The minimum balance that a token must have.
uint256 public constant MIN_BALANCE = BONE / 10 ** 12;
/// @notice The initial total supply of the pool tokens (minted to the pool creator).
uint256 public constant INIT_POOL_SUPPLY = BONE * 100;
/// @notice The minimum base value for the bpow calculation.
uint256 public constant MIN_BPOW_BASE = 1 wei;
/// @notice The maximum base value for the bpow calculation.
uint256 public constant MAX_BPOW_BASE = (2 * BONE) - 1 wei;
/// @notice The precision of the bpow calculation.
uint256 public constant BPOW_PRECISION = BONE / 10 ** 10;
/// @notice The maximum ratio of input tokens vs the current pool balance.
uint256 public constant MAX_IN_RATIO = BONE >> 1;
/// @notice The maximum ratio of output tokens vs the current pool balance.
uint256 public constant MAX_OUT_RATIO = (BONE / 3) + 1 wei;
/**
* @notice The storage slot used to write transient data.
* @dev Using an arbitrary storage slot to prevent possible future
* transient variables defined by solidity from overriding it.
* @dev Value is: uint256(keccak256('BPool.transientStorageLock')) - 1;
*/
uint256 internal constant _MUTEX_TRANSIENT_STORAGE_SLOT =
0x3f8f4c536ce1b925b469af1b09a44da237dab5bbc584585648c12be1ca25a8c4;
/// @notice The value representing an unlocked state of the mutex.
bytes32 internal constant _MUTEX_FREE = bytes32(uint256(0));
/// @notice The value representing a locked state of the mutex.
bytes32 internal constant _MUTEX_TAKEN = bytes32(uint256(1));
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {BConst} from './BConst.sol';
import {BNum} from './BNum.sol';
/**
* @title BMath
* @notice Includes functions for calculating the BPool related math.
*/
contract BMath is BConst, BNum {
/**
* @notice Calculate the spot price of a token in terms of another one
* @dev The price denomination depends on the decimals of the tokens.
* @dev To obtain the price with 18 decimals the next formula should be applied to the result
* @dev spotPrice = spotPrice ÷ (10^tokenInDecimals) × (10^tokenOutDecimals)
* @param tokenBalanceIn The balance of the input token in the pool
* @param tokenWeightIn The weight of the input token in the pool
* @param tokenBalanceOut The balance of the output token in the pool
* @param tokenWeightOut The weight of the output token in the pool
* @param swapFee The swap fee of the pool
* @return spotPrice The spot price of a token in terms of another one
* @dev Formula:
* sP = spotPrice
* bI = tokenBalanceIn ( bI / wI ) 1
* bO = tokenBalanceOut sP = ----------- * ----------
* wI = tokenWeightIn ( bO / wO ) ( 1 - sF )
* wO = tokenWeightOut
* sF = swapFee
*/
function calcSpotPrice(
uint256 tokenBalanceIn,
uint256 tokenWeightIn,
uint256 tokenBalanceOut,
uint256 tokenWeightOut,
uint256 swapFee
) public pure returns (uint256 spotPrice) {
uint256 numer = bdiv(tokenBalanceIn, tokenWeightIn);
uint256 denom = bdiv(tokenBalanceOut, tokenWeightOut);
uint256 ratio = bdiv(numer, denom);
uint256 scale = bdiv(BONE, bsub(BONE, swapFee));
return (spotPrice = bmul(ratio, scale));
}
/**
* @notice Calculate the amount of token out given the amount of token in for a swap
* @param tokenBalanceIn The balance of the input token in the pool
* @param tokenWeightIn The weight of the input token in the pool
* @param tokenBalanceOut The balance of the output token in the pool
* @param tokenWeightOut The weight of the output token in the pool
* @param tokenAmountIn The amount of the input token
* @param swapFee The swap fee of the pool
* @return tokenAmountOut The amount of token out given the amount of token in for a swap
* @dev Formula:
* aO = tokenAmountOut
* bO = tokenBalanceOut
* bI = tokenBalanceIn / / bI \ (wI / wO) \
* aI = tokenAmountIn aO = bO * | 1 - | -------------------------- | ^ |
* wI = tokenWeightIn \ \ ( bI + ( aI * ( 1 - sF )) / /
* wO = tokenWeightOut
* sF = swapFee
*/
function calcOutGivenIn(
uint256 tokenBalanceIn,
uint256 tokenWeightIn,
uint256 tokenBalanceOut,
uint256 tokenWeightOut,
uint256 tokenAmountIn,
uint256 swapFee
) public pure returns (uint256 tokenAmountOut) {
uint256 weightRatio = bdiv(tokenWeightIn, tokenWeightOut);
uint256 adjustedIn = bsub(BONE, swapFee);
adjustedIn = bmul(tokenAmountIn, adjustedIn);
uint256 y = bdiv(tokenBalanceIn, badd(tokenBalanceIn, adjustedIn));
uint256 foo = bpow(y, weightRatio);
uint256 bar = bsub(BONE, foo);
tokenAmountOut = bmul(tokenBalanceOut, bar);
return tokenAmountOut;
}
/**
* @notice Calculate the amount of token in given the amount of token out for a swap
* @param tokenBalanceIn The balance of the input token in the pool
* @param tokenWeightIn The weight of the input token in the pool
* @param tokenBalanceOut The balance of the output token in the pool
* @param tokenWeightOut The weight of the output token in the pool
* @param tokenAmountOut The amount of the output token
* @param swapFee The swap fee of the pool
* @return tokenAmountIn The amount of token in given the amount of token out for a swap
* @dev Formula:
* aI = tokenAmountIn
* bO = tokenBalanceOut / / bO \ (wO / wI) \
* bI = tokenBalanceIn bI * | | ------------ | ^ - 1 |
* aO = tokenAmountOut aI = \ \ ( bO - aO ) / /
* wI = tokenWeightIn --------------------------------------------
* wO = tokenWeightOut ( 1 - sF )
* sF = swapFee
*/
function calcInGivenOut(
uint256 tokenBalanceIn,
uint256 tokenWeightIn,
uint256 tokenBalanceOut,
uint256 tokenWeightOut,
uint256 tokenAmountOut,
uint256 swapFee
) public pure returns (uint256 tokenAmountIn) {
uint256 weightRatio = bdiv(tokenWeightOut, tokenWeightIn);
uint256 diff = bsub(tokenBalanceOut, tokenAmountOut);
uint256 y = bdiv(tokenBalanceOut, diff);
uint256 foo = bpow(y, weightRatio);
foo = bsub(foo, BONE);
tokenAmountIn = bsub(BONE, swapFee);
tokenAmountIn = bdiv(bmul(tokenBalanceIn, foo), tokenAmountIn);
return tokenAmountIn;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {BConst} from './BConst.sol';
/**
* @title BNum
* @notice Includes functions for arithmetic operations with fixed-point numbers.
* @dev The arithmetic operations are implemented with a precision of BONE.
*/
// solhint-disable private-vars-leading-underscore
// solhint-disable named-return-values
contract BNum is BConst {
/**
* @notice Thrown when an overflow is encountered inside the add function
*/
error BNum_AddOverflow();
/**
* @notice Thrown when an underflow is encountered inside the sub function
*/
error BNum_SubUnderflow();
/**
* @notice Thrown when an overflow is encountered inside the mul function
*/
error BNum_MulOverflow();
/**
* @notice Thrown when attempting to divide by zero
*/
error BNum_DivZero();
/**
* @notice Thrown when an internal error occurs inside div function
*/
error BNum_DivInternal();
/**
* @notice Thrown when the base is too low in the bpow function
*/
error BNum_BPowBaseTooLow();
/**
* @notice Thrown when the base is too high in the bpow function
*/
error BNum_BPowBaseTooHigh();
function btoi(uint256 a) internal pure returns (uint256) {
unchecked {
return a / BONE;
}
}
function bfloor(uint256 a) internal pure returns (uint256) {
unchecked {
return btoi(a) * BONE;
}
}
function badd(uint256 a, uint256 b) internal pure returns (uint256) {
unchecked {
uint256 c = a + b;
if (c < a) {
revert BNum_AddOverflow();
}
return c;
}
}
function bsub(uint256 a, uint256 b) internal pure returns (uint256) {
unchecked {
(uint256 c, bool flag) = bsubSign(a, b);
if (flag) {
revert BNum_SubUnderflow();
}
return c;
}
}
function bsubSign(uint256 a, uint256 b) internal pure returns (uint256, bool) {
unchecked {
if (a >= b) {
return (a - b, false);
} else {
return (b - a, true);
}
}
}
function bmul(uint256 a, uint256 b) internal pure returns (uint256) {
unchecked {
uint256 c0 = a * b;
if (a != 0 && c0 / a != b) {
revert BNum_MulOverflow();
}
// NOTE: using >> 1 instead of / 2
uint256 c1 = c0 + (BONE >> 1);
if (c1 < c0) {
revert BNum_MulOverflow();
}
uint256 c2 = c1 / BONE;
return c2;
}
}
function bdiv(uint256 a, uint256 b) internal pure returns (uint256) {
unchecked {
if (b == 0) {
revert BNum_DivZero();
}
uint256 c0 = a * BONE;
if (a != 0 && c0 / a != BONE) {
revert BNum_DivInternal(); // bmul overflow
}
// NOTE: using >> 1 instead of / 2
uint256 c1 = c0 + (b >> 1);
if (c1 < c0) {
revert BNum_DivInternal(); // badd require
}
uint256 c2 = c1 / b;
return c2;
}
}
// DSMath.wpow
function bpowi(uint256 a, uint256 n) internal pure returns (uint256) {
unchecked {
uint256 z = n % 2 != 0 ? a : BONE;
for (n /= 2; n != 0; n /= 2) {
a = bmul(a, a);
if (n % 2 != 0) {
z = bmul(z, a);
}
}
return z;
}
}
// Compute b^(e.w) by splitting it into (b^e)*(b^0.w).
// Use `bpowi` for `b^e` and `bpowK` for k iterations
// of approximation of b^0.w
function bpow(uint256 base, uint256 exp) internal pure returns (uint256) {
unchecked {
if (base < MIN_BPOW_BASE) {
revert BNum_BPowBaseTooLow();
}
if (base > MAX_BPOW_BASE) {
revert BNum_BPowBaseTooHigh();
}
uint256 whole = bfloor(exp);
uint256 remain = bsub(exp, whole);
uint256 wholePow = bpowi(base, btoi(whole));
if (remain == 0) {
return wholePow;
}
uint256 partialResult = bpowApprox(base, remain, BPOW_PRECISION);
return bmul(wholePow, partialResult);
}
}
function bpowApprox(uint256 base, uint256 exp, uint256 precision) internal pure returns (uint256) {
unchecked {
// term 0:
uint256 a = exp;
(uint256 x, bool xneg) = bsubSign(base, BONE);
uint256 term = BONE;
uint256 sum = term;
bool negative = false;
// term(k) = numer / denom
// = (product(a - i - 1, i=1-->k) * x^k) / (k!)
// each iteration, multiply previous term by (a-(k-1)) * x / k
// continue until term is less than precision
for (uint256 i = 1; term >= precision; i++) {
uint256 bigK = i * BONE;
(uint256 c, bool cneg) = bsubSign(a, bsub(bigK, BONE));
term = bmul(term, bmul(c, x));
term = bdiv(term, bigK);
if (term == 0) break;
if (xneg) negative = !negative;
if (cneg) negative = !negative;
if (negative) {
sum = bsub(sum, term);
} else {
sum = badd(sum, term);
}
}
return sum;
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {BMath} from './BMath.sol';
import {BToken} from './BToken.sol';
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import {SafeERC20} from '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {IBPool} from 'interfaces/IBPool.sol';
/**
* @title BPool
* @notice Pool contract that holds tokens, allows to swap, add and remove liquidity.
*/
contract BPool is BToken, BMath, IBPool {
using SafeERC20 for IERC20;
/// @dev BFactory address to push token exitFee to
/// @inheritdoc IBPool
address public immutable FACTORY;
/// @dev Has CONTROL role
address internal _controller;
/// @dev Fee for swapping
uint256 internal _swapFee;
/// @dev Status of the pool. True if finalized, False otherwise
bool internal _finalized;
/// @dev Array of bound tokens
address[] internal _tokens;
/// @dev Metadata for each bound token
mapping(address => Record) internal _records;
/// @dev Sum of all token weights
uint256 internal _totalWeight;
/// @dev Logs the call data
modifier _logs_() {
emit LOG_CALL(msg.sig, msg.sender, msg.data);
_;
}
/// @dev Prevents reentrancy in non-view functions
modifier _lock_() {
if (_getLock() != _MUTEX_FREE) {
revert BPool_Reentrancy();
}
_setLock(_MUTEX_TAKEN);
_;
_setLock(_MUTEX_FREE);
}
/// @dev Throws an error when the reentrancy mutex is taken. Doesn't modify it.
modifier _viewlock_() {
if (_getLock() != _MUTEX_FREE) {
revert BPool_Reentrancy();
}
_;
}
/// @dev Throws an error if pool is not finalized
modifier _finalized_() {
if (!_finalized) {
revert BPool_PoolNotFinalized();
}
_;
}
/// @dev Throws an error if pool is finalized
modifier _notFinalized_() {
if (_finalized) {
revert BPool_PoolIsFinalized();
}
_;
}
/**
* @notice Throws an error if caller is not controller
*/
modifier _controller_() {
if (msg.sender != _controller) {
revert BPool_CallerIsNotController();
}
_;
}
// solhint-disable-next-line no-unused-vars
constructor(string memory name, string memory symbol) BToken(name, symbol) {
_controller = msg.sender;
FACTORY = msg.sender;
_swapFee = MIN_FEE;
_finalized = false;
}
/// @inheritdoc IBPool
function setSwapFee(uint256 swapFee) external _logs_ _lock_ _controller_ _notFinalized_ {
if (swapFee < MIN_FEE) {
revert BPool_FeeBelowMinimum();
}
if (swapFee > MAX_FEE) {
revert BPool_FeeAboveMaximum();
}
_swapFee = swapFee;
}
/// @inheritdoc IBPool
function setController(address newController) external _logs_ _lock_ _controller_ {
if (newController == address(0)) {
revert BPool_AddressZero();
}
_controller = newController;
}
/// @inheritdoc IBPool
function finalize() external _logs_ _lock_ _controller_ _notFinalized_ {
if (_tokens.length < MIN_BOUND_TOKENS) {
revert BPool_TokensBelowMinimum();
}
_finalized = true;
_mintPoolShare(INIT_POOL_SUPPLY);
_pushPoolShare(msg.sender, INIT_POOL_SUPPLY);
_afterFinalize();
}
/// @inheritdoc IBPool
function bind(address token, uint256 balance, uint256 denorm) external _logs_ _lock_ _controller_ _notFinalized_ {
if (_records[token].bound) {
revert BPool_TokenAlreadyBound();
}
if (_tokens.length >= MAX_BOUND_TOKENS) {
revert BPool_TokensAboveMaximum();
}
if (denorm < MIN_WEIGHT) {
revert BPool_WeightBelowMinimum();
}
if (denorm > MAX_WEIGHT) {
revert BPool_WeightAboveMaximum();
}
if (balance < MIN_BALANCE) {
revert BPool_BalanceBelowMinimum();
}
_totalWeight = badd(_totalWeight, denorm);
if (_totalWeight > MAX_TOTAL_WEIGHT) {
revert BPool_TotalWeightAboveMaximum();
}
_records[token] = Record({bound: true, index: _tokens.length, denorm: denorm});
_tokens.push(token);
_pullUnderlying(token, msg.sender, balance);
}
/// @inheritdoc IBPool
function unbind(address token) external _logs_ _lock_ _controller_ _notFinalized_ {
if (!_records[token].bound) {
revert BPool_TokenNotBound();
}
_totalWeight = bsub(_totalWeight, _records[token].denorm);
// Swap the token-to-unbind with the last token,
// then delete the last token
uint256 index = _records[token].index;
uint256 last = _tokens.length - 1;
_tokens[index] = _tokens[last];
_records[_tokens[index]].index = index;
_tokens.pop();
_records[token] = Record({bound: false, index: 0, denorm: 0});
_pushUnderlying(token, msg.sender, IERC20(token).balanceOf(address(this)));
}
/// @inheritdoc IBPool
function joinPool(uint256 poolAmountOut, uint256[] calldata maxAmountsIn) external _logs_ _lock_ _finalized_ {
uint256 poolTotal = totalSupply();
uint256 ratio = bdiv(poolAmountOut, poolTotal);
if (ratio == 0) {
revert BPool_InvalidPoolRatio();
}
uint256 tokensLength = _tokens.length;
for (uint256 i = 0; i < tokensLength; i++) {
address t = _tokens[i];
uint256 bal = IERC20(t).balanceOf(address(this));
uint256 tokenAmountIn = bmul(ratio, bal);
if (tokenAmountIn == 0) {
revert BPool_InvalidTokenAmountIn();
}
if (tokenAmountIn > maxAmountsIn[i]) {
revert BPool_TokenAmountInAboveMaxAmountIn();
}
emit LOG_JOIN(msg.sender, t, tokenAmountIn);
_pullUnderlying(t, msg.sender, tokenAmountIn);
}
_mintPoolShare(poolAmountOut);
_pushPoolShare(msg.sender, poolAmountOut);
}
/// @inheritdoc IBPool
function exitPool(uint256 poolAmountIn, uint256[] calldata minAmountsOut) external _logs_ _lock_ _finalized_ {
uint256 poolTotal = totalSupply();
uint256 exitFee = bmul(poolAmountIn, EXIT_FEE);
uint256 pAiAfterExitFee = bsub(poolAmountIn, exitFee);
uint256 ratio = bdiv(pAiAfterExitFee, poolTotal);
if (ratio == 0) {
revert BPool_InvalidPoolRatio();
}
_pullPoolShare(msg.sender, poolAmountIn);
_pushPoolShare(FACTORY, exitFee);
_burnPoolShare(pAiAfterExitFee);
uint256 tokensLength = _tokens.length;
for (uint256 i = 0; i < tokensLength; i++) {
address t = _tokens[i];
uint256 bal = IERC20(t).balanceOf(address(this));
uint256 tokenAmountOut = bmul(ratio, bal);
if (tokenAmountOut == 0) {
revert BPool_InvalidTokenAmountOut();
}
if (tokenAmountOut < minAmountsOut[i]) {
revert BPool_TokenAmountOutBelowMinAmountOut();
}
emit LOG_EXIT(msg.sender, t, tokenAmountOut);
_pushUnderlying(t, msg.sender, tokenAmountOut);
}
}
/// @inheritdoc IBPool
function swapExactAmountIn(
address tokenIn,
uint256 tokenAmountIn,
address tokenOut,
uint256 minAmountOut,
uint256 maxPrice
) external _logs_ _lock_ _finalized_ returns (uint256 tokenAmountOut, uint256 spotPriceAfter) {
if (!_records[tokenIn].bound) {
revert BPool_TokenNotBound();
}
if (!_records[tokenOut].bound) {
revert BPool_TokenNotBound();
}
Record storage inRecord = _records[address(tokenIn)];
Record storage outRecord = _records[address(tokenOut)];
uint256 tokenInBalance = IERC20(tokenIn).balanceOf(address(this));
uint256 tokenOutBalance = IERC20(tokenOut).balanceOf(address(this));
if (tokenAmountIn > bmul(tokenInBalance, MAX_IN_RATIO)) {
revert BPool_TokenAmountInAboveMaxRatio();
}
uint256 spotPriceBefore =
calcSpotPrice(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, _swapFee);
if (spotPriceBefore > maxPrice) {
revert BPool_SpotPriceAboveMaxPrice();
}
tokenAmountOut =
calcOutGivenIn(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, tokenAmountIn, _swapFee);
if (tokenAmountOut < minAmountOut) {
revert BPool_TokenAmountOutBelowMinOut();
}
tokenInBalance = badd(tokenInBalance, tokenAmountIn);
tokenOutBalance = bsub(tokenOutBalance, tokenAmountOut);
spotPriceAfter = calcSpotPrice(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, _swapFee);
if (spotPriceAfter < spotPriceBefore) {
revert BPool_SpotPriceAfterBelowSpotPriceBefore();
}
if (spotPriceAfter > maxPrice) {
revert BPool_SpotPriceAboveMaxPrice();
}
if (spotPriceBefore > bdiv(tokenAmountIn, tokenAmountOut)) {
revert BPool_SpotPriceBeforeAboveTokenRatio();
}
emit LOG_SWAP(msg.sender, tokenIn, tokenOut, tokenAmountIn, tokenAmountOut);
_pullUnderlying(tokenIn, msg.sender, tokenAmountIn);
_pushUnderlying(tokenOut, msg.sender, tokenAmountOut);
}
/// @inheritdoc IBPool
function swapExactAmountOut(
address tokenIn,
uint256 maxAmountIn,
address tokenOut,
uint256 tokenAmountOut,
uint256 maxPrice
) external _logs_ _lock_ _finalized_ returns (uint256 tokenAmountIn, uint256 spotPriceAfter) {
if (!_records[tokenIn].bound) {
revert BPool_TokenNotBound();
}
if (!_records[tokenOut].bound) {
revert BPool_TokenNotBound();
}
Record storage inRecord = _records[address(tokenIn)];
Record storage outRecord = _records[address(tokenOut)];
uint256 tokenInBalance = IERC20(tokenIn).balanceOf(address(this));
uint256 tokenOutBalance = IERC20(tokenOut).balanceOf(address(this));
if (tokenAmountOut > bmul(tokenOutBalance, MAX_OUT_RATIO)) {
revert BPool_TokenAmountOutAboveMaxOut();
}
uint256 spotPriceBefore =
calcSpotPrice(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, _swapFee);
if (spotPriceBefore > maxPrice) {
revert BPool_SpotPriceAboveMaxPrice();
}
tokenAmountIn =
calcInGivenOut(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, tokenAmountOut, _swapFee);
if (tokenAmountIn > maxAmountIn) {
revert BPool_TokenAmountInAboveMaxAmountIn();
}
tokenInBalance = badd(tokenInBalance, tokenAmountIn);
tokenOutBalance = bsub(tokenOutBalance, tokenAmountOut);
spotPriceAfter = calcSpotPrice(tokenInBalance, inRecord.denorm, tokenOutBalance, outRecord.denorm, _swapFee);
if (spotPriceAfter < spotPriceBefore) {
revert BPool_SpotPriceAfterBelowSpotPriceBefore();
}
if (spotPriceAfter > maxPrice) {
revert BPool_SpotPriceAboveMaxPrice();
}
if (spotPriceBefore > bdiv(tokenAmountIn, tokenAmountOut)) {
revert BPool_SpotPriceBeforeAboveTokenRatio();
}
emit LOG_SWAP(msg.sender, tokenIn, tokenOut, tokenAmountIn, tokenAmountOut);
_pullUnderlying(tokenIn, msg.sender, tokenAmountIn);
_pushUnderlying(tokenOut, msg.sender, tokenAmountOut);
}
/// @inheritdoc IBPool
function getSpotPrice(address tokenIn, address tokenOut) external view _viewlock_ returns (uint256) {
if (!_records[tokenIn].bound) {
revert BPool_TokenNotBound();
}
if (!_records[tokenOut].bound) {
revert BPool_TokenNotBound();
}
Record storage inRecord = _records[tokenIn];
Record storage outRecord = _records[tokenOut];
return calcSpotPrice(
IERC20(tokenIn).balanceOf(address(this)),
inRecord.denorm,
IERC20(tokenOut).balanceOf(address(this)),
outRecord.denorm,
_swapFee
);
}
/// @inheritdoc IBPool
function getSpotPriceSansFee(address tokenIn, address tokenOut) external view _viewlock_ returns (uint256) {
if (!_records[tokenIn].bound) {
revert BPool_TokenNotBound();
}
if (!_records[tokenOut].bound) {
revert BPool_TokenNotBound();
}
Record storage inRecord = _records[tokenIn];
Record storage outRecord = _records[tokenOut];
return calcSpotPrice(
IERC20(tokenIn).balanceOf(address(this)),
inRecord.denorm,
IERC20(tokenOut).balanceOf(address(this)),
outRecord.denorm,
0
);
}
/// @inheritdoc IBPool
function isFinalized() external view returns (bool) {
return _finalized;
}
/// @inheritdoc IBPool
function isBound(address token) external view returns (bool) {
return _records[token].bound;
}
/// @inheritdoc IBPool
function getNumTokens() external view returns (uint256) {
return _tokens.length;
}
/// @inheritdoc IBPool
function getCurrentTokens() external view _viewlock_ returns (address[] memory) {
return _tokens;
}
/// @inheritdoc IBPool
function getFinalTokens() external view _viewlock_ _finalized_ returns (address[] memory) {
return _tokens;
}
/// @inheritdoc IBPool
function getDenormalizedWeight(address token) external view _viewlock_ returns (uint256) {
if (!_records[token].bound) {
revert BPool_TokenNotBound();
}
return _records[token].denorm;
}
/// @inheritdoc IBPool
function getTotalDenormalizedWeight() external view _viewlock_ returns (uint256) {
return _totalWeight;
}
/// @inheritdoc IBPool
function getNormalizedWeight(address token) external view _viewlock_ returns (uint256) {
if (!_records[token].bound) {
revert BPool_TokenNotBound();
}
uint256 denorm = _records[token].denorm;
return bdiv(denorm, _totalWeight);
}
/// @inheritdoc IBPool
function getBalance(address token) external view _viewlock_ returns (uint256) {
if (!_records[token].bound) {
revert BPool_TokenNotBound();
}
return IERC20(token).balanceOf(address(this));
}
/// @inheritdoc IBPool
function getSwapFee() external view _viewlock_ returns (uint256) {
return _swapFee;
}
/// @inheritdoc IBPool
function getController() external view _viewlock_ returns (address) {
return _controller;
}
/**
* @notice Sets the value of the transient storage slot used for reentrancy locks
* @param value The value of the transient storage slot used for reentrancy locks.
* @dev Should be set to _MUTEX_FREE after a call, any other value will
* be interpreted as locked
*/
function _setLock(bytes32 value) internal virtual {
assembly ("memory-safe") {
tstore(_MUTEX_TRANSIENT_STORAGE_SLOT, value)
}
}
/**
* @dev Pulls tokens from the sender. Tokens needs to be approved first. Calls are not locked.
* @param token The address of the token to pull
* @param from The address to pull the tokens from
* @param amount The amount of tokens to pull
*/
function _pullUnderlying(address token, address from, uint256 amount) internal virtual {
IERC20(token).safeTransferFrom(from, address(this), amount);
}
/**
* @dev Pushes tokens to the receiver. Calls are not locked.
* @param token The address of the token to push
* @param to The address to push the tokens to
* @param amount The amount of tokens to push
*/
function _pushUnderlying(address token, address to, uint256 amount) internal virtual {
IERC20(token).safeTransfer(to, amount);
}
/**
* @dev Hook for extensions to execute custom logic when a pool is finalized,
* e.g. Setting infinite allowance on BCoWPool
*/
// solhint-disable-next-line no-empty-blocks
function _afterFinalize() internal virtual {}
/**
* @dev Pulls pool tokens from the sender.
* @param from The address to pull the pool tokens from
* @param amount The amount of pool tokens to pull
*/
function _pullPoolShare(address from, uint256 amount) internal virtual {
_pull(from, amount);
}
/**
* @dev Pushes pool tokens to the receiver.
* @param to The address to push the pool tokens to
* @param amount The amount of pool tokens to push
*/
function _pushPoolShare(address to, uint256 amount) internal virtual {
_push(to, amount);
}
/**
* @dev Mints an amount of pool tokens.
* @param amount The amount of pool tokens to mint
*/
function _mintPoolShare(uint256 amount) internal virtual {
_mint(address(this), amount);
}
/**
* @dev Burns an amount of pool tokens.
* @param amount The amount of pool tokens to burn
*/
function _burnPoolShare(uint256 amount) internal virtual {
_burn(address(this), amount);
}
/**
* @notice Gets the value of the transient storage slot used for reentrancy locks
* @return value Contents of transient storage slot used for reentrancy locks.
* @dev Should only be compared against _MUTEX_FREE for the purposes of
* allowing calls
*/
function _getLock() internal view virtual returns (bytes32 value) {
assembly ("memory-safe") {
value := tload(_MUTEX_TRANSIENT_STORAGE_SLOT)
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {ERC20} from '@openzeppelin/contracts/token/ERC20/ERC20.sol';
/**
* @title BToken
* @notice Balancer Pool Token base contract, providing ERC20 functionality.
*/
contract BToken is ERC20 {
constructor(string memory name, string memory symbol) ERC20(name, symbol) {}
/**
* @notice Increase the allowance of the spender.
* @param spender The address which will spend the funds.
* @param amount The amount of tokens to increase the allowance by.
* @return success True if the operation is successful.
*/
function increaseApproval(address spender, uint256 amount) external returns (bool success) {
_approve(msg.sender, spender, allowance(msg.sender, spender) + amount);
success = true;
}
/**
* @notice Decrease the allowance of the spender.
* @param spender The address which will spend the funds.
* @param amount The amount of tokens to decrease the allowance by.
* @return success True if the operation is successful.
*/
function decreaseApproval(address spender, uint256 amount) external returns (bool success) {
uint256 oldValue = allowance(msg.sender, spender);
if (amount > oldValue) {
_approve(msg.sender, spender, 0);
} else {
_approve(msg.sender, spender, oldValue - amount);
}
success = true;
}
/**
* @notice Transfer tokens from one this contract to another.
* @param to The address which you want to transfer to.
* @param amount The amount of tokens to be transferred.
*/
function _push(address to, uint256 amount) internal virtual {
_transfer(address(this), to, amount);
}
/**
* @notice Pull tokens from another address to this contract.
* @param from The address which you want to transfer from.
* @param amount The amount of tokens to be transferred.
*/
function _pull(address from, uint256 amount) internal virtual {
_transfer(from, address(this), amount);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*/
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
mapping(address account => uint256) private _balances;
mapping(address account => mapping(address spender => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `value`.
*/
function transfer(address to, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_transfer(owner, to, value);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, value);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `value`.
* - the caller must have allowance for ``from``'s tokens of at least
* `value`.
*/
function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, value);
_transfer(from, to, value);
return true;
}
/**
* @dev Moves a `value` amount of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _transfer(address from, address to, uint256 value) internal {
if (from == address(0)) {
revert ERC20InvalidSender(address(0));
}
if (to == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(from, to, value);
}
/**
* @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
* (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
* this function.
*
* Emits a {Transfer} event.
*/
function _update(address from, address to, uint256 value) internal virtual {
if (from == address(0)) {
// Overflow check required: The rest of the code assumes that totalSupply never overflows
_totalSupply += value;
} else {
uint256 fromBalance = _balances[from];
if (fromBalance < value) {
revert ERC20InsufficientBalance(from, fromBalance, value);
}
unchecked {
// Overflow not possible: value <= fromBalance <= totalSupply.
_balances[from] = fromBalance - value;
}
}
if (to == address(0)) {
unchecked {
// Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
_totalSupply -= value;
}
} else {
unchecked {
// Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
_balances[to] += value;
}
}
emit Transfer(from, to, value);
}
/**
* @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
* Relies on the `_update` mechanism
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _mint(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(address(0), account, value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
* Relies on the `_update` mechanism.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead
*/
function _burn(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidSender(address(0));
}
_update(account, address(0), value);
}
/**
* @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*
* Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
*/
function _approve(address owner, address spender, uint256 value) internal {
_approve(owner, spender, value, true);
}
/**
* @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
*
* By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
* `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
* `Approval` event during `transferFrom` operations.
*
* Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
* true using the following override:
* ```
* function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
* super._approve(owner, spender, value, true);
* }
* ```
*
* Requirements are the same as {_approve}.
*/
function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
if (owner == address(0)) {
revert ERC20InvalidApprover(address(0));
}
if (spender == address(0)) {
revert ERC20InvalidSpender(address(0));
}
_allowances[owner][spender] = value;
if (emitEvent) {
emit Approval(owner, spender, value);
}
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `value`.
*
* Does not update the allowance value in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Does not emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < value) {
revert ERC20InsufficientAllowance(spender, currentAllowance, value);
}
unchecked {
_approve(owner, spender, currentAllowance - value, false);
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity >=0.7.6 <0.9.0;
library GPv2EIP1271 {
/// @dev Value returned by a call to `isValidSignature` if the signature
/// was verified successfully. The value is defined in EIP-1271 as:
/// bytes4(keccak256("isValidSignature(bytes32,bytes)"))
bytes4 internal constant MAGICVALUE = 0x1626ba7e;
}
/// @title EIP1271 Interface
/// @dev Standardized interface for an implementation of smart contract
/// signatures as described in EIP-1271. The code that follows is identical to
/// the code in the standard with the exception of formatting and syntax
/// changes to adapt the code to our Solidity version.
interface EIP1271Verifier {
/// @dev Should return whether the signature provided is valid for the
/// provided data
/// @param _hash Hash of the data to be signed
/// @param _signature Signature byte array associated with _data
///
/// MUST return the bytes4 magic value 0x1626ba7e when function passes.
/// MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for
/// solc > 0.5)
/// MUST allow external calls
///
function isValidSignature(
bytes32 _hash,
bytes memory _signature
) external view returns (bytes4 magicValue);
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity >=0.7.6 <0.9.0;
/// @title Gnosis Protocol v2 Interaction Library
/// @author Gnosis Developers
library GPv2Interaction {
/// @dev Interaction data for performing arbitrary contract interactions.
/// Submitted to [`GPv2Settlement.settle`] for code execution.
struct Data {
address target;
uint256 value;
bytes callData;
}
/// @dev Execute an arbitrary contract interaction.
///
/// @param interaction Interaction data.
function execute(Data calldata interaction) internal {
address target = interaction.target;
uint256 value = interaction.value;
bytes calldata callData = interaction.callData;
// NOTE: Use assembly to call the interaction instead of a low level
// call for two reasons:
// - We don't want to copy the return data, since we discard it for
// interactions.
// - Solidity will under certain conditions generate code to copy input
// calldata twice to memory (the second being a "memcopy loop").
// <https://github.com/gnosis/gp-v2-contracts/pull/417#issuecomment-775091258>
// solhint-disable-next-line no-inline-assembly
assembly {
let freeMemoryPointer := mload(0x40)
calldatacopy(freeMemoryPointer, callData.offset, callData.length)
if iszero(
call(
gas(),
target,
value,
freeMemoryPointer,
callData.length,
0,
0
)
) {
returndatacopy(0, 0, returndatasize())
revert(0, returndatasize())
}
}
}
/// @dev Extracts the Solidity ABI selector for the specified interaction.
///
/// @param interaction Interaction data.
/// @return result The 4 byte function selector of the call encoded in
/// this interaction.
function selector(
Data calldata interaction
) internal pure returns (bytes4 result) {
bytes calldata callData = interaction.callData;
if (callData.length >= 4) {
// NOTE: Read the first word of the interaction's calldata. The
// value does not need to be shifted since `bytesN` values are left
// aligned, and the value does not need to be masked since masking
// occurs when the value is accessed and not stored:
// <https://docs.soliditylang.org/en/v0.7.6/abi-spec.html#encoding-of-indexed-event-parameters>
// <https://docs.soliditylang.org/en/v0.7.6/assembly.html#access-to-external-variables-functions-and-libraries>
// solhint-disable-next-line no-inline-assembly
assembly {
result := calldataload(callData.offset)
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity >=0.7.6 <0.9.0;
import "../interfaces/IERC20.sol";
/// @title Gnosis Protocol v2 Order Library
/// @author Gnosis Developers
library GPv2Order {
/// @dev The complete data for a Gnosis Protocol order. This struct contains
/// all order parameters that are signed for submitting to GP.
struct Data {
IERC20 sellToken;
IERC20 buyToken;
address receiver;
uint256 sellAmount;
uint256 buyAmount;
uint32 validTo;
bytes32 appData;
uint256 feeAmount;
bytes32 kind;
bool partiallyFillable;
bytes32 sellTokenBalance;
bytes32 buyTokenBalance;
}
/// @dev The order EIP-712 type hash for the [`GPv2Order.Data`] struct.
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256(
/// "Order(" +
/// "address sellToken," +
/// "address buyToken," +
/// "address receiver," +
/// "uint256 sellAmount," +
/// "uint256 buyAmount," +
/// "uint32 validTo," +
/// "bytes32 appData," +
/// "uint256 feeAmount," +
/// "string kind," +
/// "bool partiallyFillable," +
/// "string sellTokenBalance," +
/// "string buyTokenBalance" +
/// ")"
/// )
/// ```
bytes32 internal constant TYPE_HASH =
hex"d5a25ba2e97094ad7d83dc28a6572da797d6b3e7fc6663bd93efb789fc17e489";
/// @dev The marker value for a sell order for computing the order struct
/// hash. This allows the EIP-712 compatible wallets to display a
/// descriptive string for the order kind (instead of 0 or 1).
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256("sell")
/// ```
bytes32 internal constant KIND_SELL =
hex"f3b277728b3fee749481eb3e0b3b48980dbbab78658fc419025cb16eee346775";
/// @dev The OrderKind marker value for a buy order for computing the order
/// struct hash.
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256("buy")
/// ```
bytes32 internal constant KIND_BUY =
hex"6ed88e868af0a1983e3886d5f3e95a2fafbd6c3450bc229e27342283dc429ccc";
/// @dev The TokenBalance marker value for using direct ERC20 balances for
/// computing the order struct hash.
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256("erc20")
/// ```
bytes32 internal constant BALANCE_ERC20 =
hex"5a28e9363bb942b639270062aa6bb295f434bcdfc42c97267bf003f272060dc9";
/// @dev The TokenBalance marker value for using Balancer Vault external
/// balances (in order to re-use Vault ERC20 approvals) for computing the
/// order struct hash.
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256("external")
/// ```
bytes32 internal constant BALANCE_EXTERNAL =
hex"abee3b73373acd583a130924aad6dc38cfdc44ba0555ba94ce2ff63980ea0632";
/// @dev The TokenBalance marker value for using Balancer Vault internal
/// balances for computing the order struct hash.
///
/// This value is pre-computed from the following expression:
/// ```
/// keccak256("internal")
/// ```
bytes32 internal constant BALANCE_INTERNAL =
hex"4ac99ace14ee0a5ef932dc609df0943ab7ac16b7583634612f8dc35a4289a6ce";
/// @dev Marker address used to indicate that the receiver of the trade
/// proceeds should the owner of the order.
///
/// This is chosen to be `address(0)` for gas efficiency as it is expected
/// to be the most common case.
address internal constant RECEIVER_SAME_AS_OWNER = address(0);
/// @dev The byte length of an order unique identifier.
uint256 internal constant UID_LENGTH = 56;
/// @dev Returns the actual receiver for an order. This function checks
/// whether or not the [`receiver`] field uses the marker value to indicate
/// it is the same as the order owner.
///
/// @return receiver The actual receiver of trade proceeds.
function actualReceiver(
Data memory order,
address owner
) internal pure returns (address receiver) {
if (order.receiver == RECEIVER_SAME_AS_OWNER) {
receiver = owner;
} else {
receiver = order.receiver;
}
}
/// @dev Return the EIP-712 signing hash for the specified order.
///
/// @param order The order to compute the EIP-712 signing hash for.
/// @param domainSeparator The EIP-712 domain separator to use.
/// @return orderDigest The 32 byte EIP-712 struct hash.
function hash(
Data memory order,
bytes32 domainSeparator
) internal pure returns (bytes32 orderDigest) {
bytes32 structHash;
// NOTE: Compute the EIP-712 order struct hash in place. As suggested
// in the EIP proposal, noting that the order struct has 12 fields, and
// prefixing the type hash `(1 + 12) * 32 = 416` bytes to hash.
// <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#rationale-for-encodedata>
// solhint-disable-next-line no-inline-assembly
assembly {
let dataStart := sub(order, 32)
let temp := mload(dataStart)
mstore(dataStart, TYPE_HASH)
structHash := keccak256(dataStart, 416)
mstore(dataStart, temp)
}
// NOTE: Now that we have the struct hash, compute the EIP-712 signing
// hash using scratch memory past the free memory pointer. The signing
// hash is computed from `"\x19\x01" || domainSeparator || structHash`.
// <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory>
// <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#specification>
// solhint-disable-next-line no-inline-assembly
assembly {
let freeMemoryPointer := mload(0x40)
mstore(freeMemoryPointer, "\x19\x01")
mstore(add(freeMemoryPointer, 2), domainSeparator)
mstore(add(freeMemoryPointer, 34), structHash)
orderDigest := keccak256(freeMemoryPointer, 66)
}
}
/// @dev Packs order UID parameters into the specified memory location. The
/// result is equivalent to `abi.encodePacked(...)` with the difference that
/// it allows re-using the memory for packing the order UID.
///
/// This function reverts if the order UID buffer is not the correct size.
///
/// @param orderUid The buffer pack the order UID parameters into.
/// @param orderDigest The EIP-712 struct digest derived from the order
/// parameters.
/// @param owner The address of the user who owns this order.
/// @param validTo The epoch time at which the order will stop being valid.
function packOrderUidParams(
bytes memory orderUid,
bytes32 orderDigest,
address owner,
uint32 validTo
) internal pure {
require(orderUid.length == UID_LENGTH, "GPv2: uid buffer overflow");
// NOTE: Write the order UID to the allocated memory buffer. The order
// parameters are written to memory in **reverse order** as memory
// operations write 32-bytes at a time and we want to use a packed
// encoding. This means, for example, that after writing the value of
// `owner` to bytes `20:52`, writing the `orderDigest` to bytes `0:32`
// will **overwrite** bytes `20:32`. This is desirable as addresses are
// only 20 bytes and `20:32` should be `0`s:
//
// | 1111111111222222222233333333334444444444555555
// byte | 01234567890123456789012345678901234567890123456789012345
// -------+---------------------------------------------------------
// field | [.........orderDigest..........][......owner.......][vT]
// -------+---------------------------------------------------------
// mstore | [000000000000000000000000000.vT]
// | [00000000000.......owner.......]
// | [.........orderDigest..........]
//
// Additionally, since Solidity `bytes memory` are length prefixed,
// 32 needs to be added to all the offsets.
//
// solhint-disable-next-line no-inline-assembly
assembly {
mstore(add(orderUid, 56), validTo)
mstore(add(orderUid, 52), owner)
mstore(add(orderUid, 32), orderDigest)
}
}
/// @dev Extracts specific order information from the standardized unique
/// order id of the protocol.
///
/// @param orderUid The unique identifier used to represent an order in
/// the protocol. This uid is the packed concatenation of the order digest,
/// the validTo order parameter and the address of the user who created the
/// order. It is used by the user to interface with the contract directly,
/// and not by calls that are triggered by the solvers.
/// @return orderDigest The EIP-712 signing digest derived from the order
/// parameters.
/// @return owner The address of the user who owns this order.
/// @return validTo The epoch time at which the order will stop being valid.
function extractOrderUidParams(
bytes calldata orderUid
)
internal
pure
returns (bytes32 orderDigest, address owner, uint32 validTo)
{
require(orderUid.length == UID_LENGTH, "GPv2: invalid uid");
// Use assembly to efficiently decode packed calldata.
// solhint-disable-next-line no-inline-assembly
assembly {
orderDigest := calldataload(orderUid.offset)
owner := shr(96, calldataload(add(orderUid.offset, 32)))
validTo := shr(224, calldataload(add(orderUid.offset, 52)))
}
}
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity >=0.7.6 <0.9.0;
import "../interfaces/GPv2EIP1271.sol";
import "../libraries/GPv2Order.sol";
import "../libraries/GPv2Trade.sol";
/// @title Gnosis Protocol v2 Signing Library.
/// @author Gnosis Developers
abstract contract GPv2Signing {
using GPv2Order for GPv2Order.Data;
using GPv2Order for bytes;
/// @dev Recovered trade data containing the extracted order and the
/// recovered owner address.
struct RecoveredOrder {
GPv2Order.Data data;
bytes uid;
address owner;
address receiver;
}
/// @dev Signing scheme used for recovery.
enum Scheme {
Eip712,
EthSign,
Eip1271,
PreSign
}
/// @dev The EIP-712 domain type hash used for computing the domain
/// separator.
bytes32 private constant DOMAIN_TYPE_HASH =
keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
/// @dev The EIP-712 domain name used for computing the domain separator.
bytes32 private constant DOMAIN_NAME = keccak256("Gnosis Protocol");
/// @dev The EIP-712 domain version used for computing the domain separator.
bytes32 private constant DOMAIN_VERSION = keccak256("v2");
/// @dev Marker value indicating an order is pre-signed.
uint256 private constant PRE_SIGNED =
uint256(keccak256("GPv2Signing.Scheme.PreSign"));
/// @dev The domain separator used for signing orders that gets mixed in
/// making signatures for different domains incompatible. This domain
/// separator is computed following the EIP-712 standard and has replay
/// protection mixed in so that signed orders are only valid for specific
/// GPv2 contracts.
bytes32 public immutable domainSeparator;
/// @dev Storage indicating whether or not an order has been signed by a
/// particular address.
mapping(bytes => uint256) public preSignature;
/// @dev Event that is emitted when an account either pre-signs an order or
/// revokes an existing pre-signature.
event PreSignature(address indexed owner, bytes orderUid, bool signed);
constructor() {
// NOTE: Currently, the only way to get the chain ID in solidity is
// using assembly.
uint256 chainId;
// solhint-disable-next-line no-inline-assembly
assembly {
chainId := chainid()
}
domainSeparator = keccak256(
abi.encode(
DOMAIN_TYPE_HASH,
DOMAIN_NAME,
DOMAIN_VERSION,
chainId,
address(this)
)
);
}
/// @dev Sets a presignature for the specified order UID.
///
/// @param orderUid The unique identifier of the order to pre-sign.
/// @param signed True to set the order as tradable with pre-sign, false to
/// false to unset it.
function setPreSignature(bytes calldata orderUid, bool signed) external {
(, address owner, ) = orderUid.extractOrderUidParams();
require(owner == msg.sender, "GPv2: cannot presign order");
if (signed) {
preSignature[orderUid] = PRE_SIGNED;
} else {
preSignature[orderUid] = 0;
}
emit PreSignature(owner, orderUid, signed);
}
/// @dev Returns an empty recovered order with a pre-allocated buffer for
/// packing the unique identifier.
///
/// @return recoveredOrder The empty recovered order data.
function allocateRecoveredOrder()
internal
pure
returns (RecoveredOrder memory recoveredOrder)
{
recoveredOrder.uid = new bytes(GPv2Order.UID_LENGTH);
}
/// @dev Extracts order data and recovers the signer from the specified
/// trade.
///
/// @param recoveredOrder Memory location used for writing the recovered order data.
/// @param tokens The list of tokens included in the settlement. The token
/// indices in the trade parameters map to tokens in this array.
/// @param trade The trade data to recover the order data from.
function recoverOrderFromTrade(
RecoveredOrder memory recoveredOrder,
IERC20[] calldata tokens,
GPv2Trade.Data calldata trade
) internal view {
GPv2Order.Data memory order = recoveredOrder.data;
Scheme signingScheme = GPv2Trade.extractOrder(trade, tokens, order);
(bytes32 orderDigest, address owner) = recoverOrderSigner(
order,
signingScheme,
trade.signature
);
recoveredOrder.uid.packOrderUidParams(
orderDigest,
owner,
order.validTo
);
recoveredOrder.owner = owner;
recoveredOrder.receiver = order.actualReceiver(owner);
}
/// @dev The length of any signature from an externally owned account.
uint256 private constant ECDSA_SIGNATURE_LENGTH = 65;
/// @dev Recovers an order's signer from the specified order and signature.
///
/// @param order The order to recover a signature for.
/// @param signingScheme The signing scheme.
/// @param signature The signature bytes.
/// @return orderDigest The computed order hash.
/// @return owner The recovered address from the specified signature.
function recoverOrderSigner(
GPv2Order.Data memory order,
Scheme signingScheme,
bytes calldata signature
) internal view returns (bytes32 orderDigest, address owner) {
orderDigest = order.hash(domainSeparator);
if (signingScheme == Scheme.Eip712) {
owner = recoverEip712Signer(orderDigest, signature);
} else if (signingScheme == Scheme.EthSign) {
owner = recoverEthsignSigner(orderDigest, signature);
} else if (signingScheme == Scheme.Eip1271) {
owner = recoverEip1271Signer(orderDigest, signature);
} else {
// signingScheme == Scheme.PreSign
owner = recoverPreSigner(orderDigest, signature, order.validTo);
}
}
/// @dev Perform an ECDSA recover for the specified message and calldata
/// signature.
///
/// The signature is encoded by tighyly packing the following struct:
/// ```
/// struct EncodedSignature {
/// bytes32 r;
/// bytes32 s;
/// uint8 v;
/// }
/// ```
///
/// @param message The signed message.
/// @param encodedSignature The encoded signature.
function ecdsaRecover(
bytes32 message,
bytes calldata encodedSignature
) internal pure returns (address signer) {
require(
encodedSignature.length == ECDSA_SIGNATURE_LENGTH,
"GPv2: malformed ecdsa signature"
);
bytes32 r;
bytes32 s;
uint8 v;
// NOTE: Use assembly to efficiently decode signature data.
// solhint-disable-next-line no-inline-assembly
assembly {
// r = uint256(encodedSignature[0:32])
r := calldataload(encodedSignature.offset)
// s = uint256(encodedSignature[32:64])
s := calldataload(add(encodedSignature.offset, 32))
// v = uint8(encodedSignature[64])
v := shr(248, calldataload(add(encodedSignature.offset, 64)))
}
signer = ecrecover(message, v, r, s);
require(signer != address(0), "GPv2: invalid ecdsa signature");
}
/// @dev Decodes signature bytes originating from an EIP-712-encoded
/// signature.
///
/// EIP-712 signs typed data. The specifications are described in the
/// related EIP (<https://eips.ethereum.org/EIPS/eip-712>).
///
/// EIP-712 signatures are encoded as standard ECDSA signatures as described
/// in the corresponding decoding function [`ecdsaRecover`].
///
/// @param orderDigest The EIP-712 signing digest derived from the order
/// parameters.
/// @param encodedSignature Calldata pointing to tightly packed signature
/// bytes.
/// @return owner The address of the signer.
function recoverEip712Signer(
bytes32 orderDigest,
bytes calldata encodedSignature
) internal pure returns (address owner) {
owner = ecdsaRecover(orderDigest, encodedSignature);
}
/// @dev Decodes signature bytes originating from the output of the eth_sign
/// RPC call.
///
/// The specifications are described in the Ethereum documentation
/// (<https://eth.wiki/json-rpc/API#eth_sign>).
///
/// eth_sign signatures are encoded as standard ECDSA signatures as
/// described in the corresponding decoding function
/// [`ecdsaRecover`].
///
/// @param orderDigest The EIP-712 signing digest derived from the order
/// parameters.
/// @param encodedSignature Calldata pointing to tightly packed signature
/// bytes.
/// @return owner The address of the signer.
function recoverEthsignSigner(
bytes32 orderDigest,
bytes calldata encodedSignature
) internal pure returns (address owner) {
// The signed message is encoded as:
// `"\x19Ethereum Signed Message:\n" || length || data`, where
// the length is a constant (32 bytes) and the data is defined as:
// `orderDigest`.
bytes32 ethsignDigest = keccak256(
abi.encodePacked("\x19Ethereum Signed Message:\n32", orderDigest)
);
owner = ecdsaRecover(ethsignDigest, encodedSignature);
}
/// @dev Verifies the input calldata as an EIP-1271 contract signature and
/// returns the address of the signer.
///
/// The encoded signature tightly packs the following struct:
///
/// ```
/// struct EncodedEip1271Signature {
/// address owner;
/// bytes signature;
/// }
/// ```
///
/// This function enforces that the encoded data stores enough bytes to
/// cover the full length of the decoded signature.
///
/// @param encodedSignature The encoded EIP-1271 signature.
/// @param orderDigest The EIP-712 signing digest derived from the order
/// parameters.
/// @return owner The address of the signer.
function recoverEip1271Signer(
bytes32 orderDigest,
bytes calldata encodedSignature
) internal view returns (address owner) {
// NOTE: Use assembly to read the verifier address from the encoded
// signature bytes.
// solhint-disable-next-line no-inline-assembly
assembly {
// owner = address(encodedSignature[0:20])
owner := shr(96, calldataload(encodedSignature.offset))
}
// NOTE: Configure prettier to ignore the following line as it causes
// a panic in the Solidity plugin.
// prettier-ignore
bytes calldata signature = encodedSignature[20:];
require(
EIP1271Verifier(owner).isValidSignature(orderDigest, signature) ==
GPv2EIP1271.MAGICVALUE,
"GPv2: invalid eip1271 signature"
);
}
/// @dev Verifies the order has been pre-signed. The signature is the
/// address of the signer of the order.
///
/// @param orderDigest The EIP-712 signing digest derived from the order
/// parameters.
/// @param encodedSignature The pre-sign signature reprenting the order UID.
/// @param validTo The order expiry timestamp.
/// @return owner The address of the signer.
function recoverPreSigner(
bytes32 orderDigest,
bytes calldata encodedSignature,
uint32 validTo
) internal view returns (address owner) {
require(encodedSignature.length == 20, "GPv2: malformed presignature");
// NOTE: Use assembly to read the owner address from the encoded
// signature bytes.
// solhint-disable-next-line no-inline-assembly
assembly {
// owner = address(encodedSignature[0:20])
owner := shr(96, calldataload(encodedSignature.offset))
}
bytes memory orderUid = new bytes(GPv2Order.UID_LENGTH);
orderUid.packOrderUidParams(orderDigest, owner, validTo);
require(
preSignature[orderUid] == PRE_SIGNED,
"GPv2: order not presigned"
);
}
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity >=0.7.6 <0.9.0;
import "../interfaces/IERC20.sol";
import "../mixins/GPv2Signing.sol";
import "./GPv2Order.sol";
/// @title Gnosis Protocol v2 Trade Library.
/// @author Gnosis Developers
library GPv2Trade {
using GPv2Order for GPv2Order.Data;
using GPv2Order for bytes;
/// @dev A struct representing a trade to be executed as part a batch
/// settlement.
struct Data {
uint256 sellTokenIndex;
uint256 buyTokenIndex;
address receiver;
uint256 sellAmount;
uint256 buyAmount;
uint32 validTo;
bytes32 appData;
uint256 feeAmount;
uint256 flags;
uint256 executedAmount;
bytes signature;
}
/// @dev Extracts the order data and signing scheme for the specified trade.
///
/// @param trade The trade.
/// @param tokens The list of tokens included in the settlement. The token
/// indices in the trade parameters map to tokens in this array.
/// @param order The memory location to extract the order data to.
function extractOrder(
Data calldata trade,
IERC20[] calldata tokens,
GPv2Order.Data memory order
) internal pure returns (GPv2Signing.Scheme signingScheme) {
order.sellToken = tokens[trade.sellTokenIndex];
order.buyToken = tokens[trade.buyTokenIndex];
order.receiver = trade.receiver;
order.sellAmount = trade.sellAmount;
order.buyAmount = trade.buyAmount;
order.validTo = trade.validTo;
order.appData = trade.appData;
order.feeAmount = trade.feeAmount;
(
order.kind,
order.partiallyFillable,
order.sellTokenBalance,
order.buyTokenBalance,
signingScheme
) = extractFlags(trade.flags);
}
/// @dev Decodes trade flags.
///
/// Trade flags are used to tightly encode information on how to decode
/// an order. Examples that directly affect the structure of an order are
/// the kind of order (either a sell or a buy order) as well as whether the
/// order is partially fillable or if it is a "fill-or-kill" order. It also
/// encodes the signature scheme used to validate the order. As the most
/// likely values are fill-or-kill sell orders by an externally owned
/// account, the flags are chosen such that `0x00` represents this kind of
/// order. The flags byte uses the following format:
///
/// ```
/// bit | 31 ... | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
/// ----+----------+-------+---+-------+---+---+
/// | reserved | * * | * | * * | * | * |
/// | | | | | | |
/// | | | | | | +---- order kind bit, 0 for a sell order
/// | | | | | | and 1 for a buy order
/// | | | | | |
/// | | | | | +-------- order fill bit, 0 for fill-or-kill
/// | | | | | and 1 for a partially fillable order
/// | | | | |
/// | | | +---+------------ use internal sell token balance bit:
/// | | | 0x: ERC20 token balance
/// | | | 10: external Balancer Vault balance
/// | | | 11: internal Balancer Vault balance
/// | | |
/// | | +-------------------- use buy token balance bit
/// | | 0: ERC20 token balance
/// | | 1: internal Balancer Vault balance
/// | |
/// +---+------------------------ signature scheme bits:
/// 00: EIP-712
/// 01: eth_sign
/// 10: EIP-1271
/// 11: pre_sign
/// ```
function extractFlags(
uint256 flags
)
internal
pure
returns (
bytes32 kind,
bool partiallyFillable,
bytes32 sellTokenBalance,
bytes32 buyTokenBalance,
GPv2Signing.Scheme signingScheme
)
{
if (flags & 0x01 == 0) {
kind = GPv2Order.KIND_SELL;
} else {
kind = GPv2Order.KIND_BUY;
}
partiallyFillable = flags & 0x02 != 0;
if (flags & 0x08 == 0) {
sellTokenBalance = GPv2Order.BALANCE_ERC20;
} else if (flags & 0x04 == 0) {
sellTokenBalance = GPv2Order.BALANCE_EXTERNAL;
} else {
sellTokenBalance = GPv2Order.BALANCE_INTERNAL;
}
if (flags & 0x10 == 0) {
buyTokenBalance = GPv2Order.BALANCE_ERC20;
} else {
buyTokenBalance = GPv2Order.BALANCE_INTERNAL;
}
// NOTE: Take advantage of the fact that Solidity will revert if the
// following expression does not produce a valid enum value. This means
// we check here that the leading reserved bits must be 0.
signingScheme = GPv2Signing.Scheme(flags >> 5);
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {IBFactory} from 'interfaces/IBFactory.sol';
interface IBCoWFactory is IBFactory {
/**
* @notice Emitted when a bCoWPool created by this factory is finalized
* @param bCoWPool The pool just finalized
*/
event COWAMMPoolCreated(address indexed bCoWPool);
/**
* @notice thrown when the caller of `logBCoWPool()` is not a bCoWPool created by this factory
*/
error BCoWFactory_NotValidBCoWPool();
/**
* @notice Emits the COWAMMPoolCreated event if the caller is a bCoWPool, to be indexed by off-chain agents
*/
function logBCoWPool() external;
/**
* @notice The address of the CoW Protocol settlement contract. It is the
* only address that can set commitments.
* @return solutionSettler The address of the solution settler.
*/
// solhint-disable-next-line style-guide-casing
function SOLUTION_SETTLER() external view returns (address solutionSettler);
/**
* @notice The identifier describing which `GPv2Order.AppData` currently
* apply to this AMM.
* @return appData The 32 bytes identifier of the allowed GPv2Order AppData.
*/
// solhint-disable-next-line style-guide-casing
function APP_DATA() external view returns (bytes32 appData);
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {GPv2Order} from '@cowprotocol/libraries/GPv2Order.sol';
import {IERC1271} from '@openzeppelin/contracts/interfaces/IERC1271.sol';
import {IBPool} from 'interfaces/IBPool.sol';
import {ISettlement} from 'interfaces/ISettlement.sol';
interface IBCoWPool is IERC1271, IBPool {
/**
* @notice Thrown when a CoW order has a non-zero fee
*/
error BCoWPool_FeeMustBeZero();
/**
* @notice Thrown when a CoW order is executed after its deadline
*/
error BCoWPool_OrderValidityTooLong();
/**
* @notice Thrown when a CoW order has an unknown type (must be GPv2Order.KIND_SELL)
*/
error BCoWPool_InvalidOperation();
/**
* @notice Thrown when a CoW order has an invalid balance marker. BCoWPool
* only supports BALANCE_ERC20, instructing to use the underlying ERC20
* balance directly instead of balancer's internal accounting
*/
error BCoWPool_InvalidBalanceMarker();
/**
* @notice The `commit` function can only be called inside a CoW Swap
* settlement. This error is thrown when the function is called from another
* context.
*/
error CommitOutsideOfSettlement();
/**
* @notice Error thrown when a solver tries to settle an AMM order on CoW
* Protocol whose hash doesn't match the one that has been committed to.
*/
error OrderDoesNotMatchCommitmentHash();
/**
* @notice On signature verification, the hash of the order supplied as part
* of the signature does not match the provided message hash.
* This usually means that the verification function is being provided a
* signature that belongs to a different order.
*/
error OrderDoesNotMatchMessageHash();
/**
* @notice Thrown when AppData that was provided during signature verification
* does not match the one stored in this contract.
*/
error AppDataDoesNotMatch();
/**
* @notice Thrown when the receiver of the order is not the bCoWPool itself.
*/
error BCoWPool_ReceiverIsNotBCoWPool();
/**
* @notice Restricts a specific AMM to being able to trade only the order
* with the specified hash.
* @dev The commitment is used to enforce that exactly one AMM order is
* valid when a CoW Protocol batch is settled.
* @param orderHash the order hash that will be enforced by the order
* verification function.
*/
function commit(bytes32 orderHash) external;
/**
* @notice The address that can pull funds from the AMM vault to execute an order
* @return vaultRelayer The address of the vault relayer.
*/
// solhint-disable-next-line style-guide-casing
function VAULT_RELAYER() external view returns (address vaultRelayer);
/**
* @notice The domain separator used for hashing CoW Protocol orders.
* @return solutionSettlerDomainSeparator The domain separator.
*/
// solhint-disable-next-line style-guide-casing
function SOLUTION_SETTLER_DOMAIN_SEPARATOR() external view returns (bytes32 solutionSettlerDomainSeparator);
/**
* @notice The address of the CoW Protocol settlement contract. It is the
* only address that can set commitments.
* @return solutionSettler The address of the solution settler.
*/
// solhint-disable-next-line style-guide-casing
function SOLUTION_SETTLER() external view returns (ISettlement solutionSettler);
/**
* @notice The identifier describing which `GPv2Order.AppData` currently
* apply to this AMM.
* @return appData The 32 bytes identifier of the allowed GPv2Order AppData.
*/
// solhint-disable-next-line style-guide-casing
function APP_DATA() external view returns (bytes32 appData);
/**
* @notice This function checks that the input order is admissible for the
* constant-product curve for the given trading parameters.
* @param order `GPv2Order.Data` of a discrete order to be verified.
*/
function verify(GPv2Order.Data memory order) external view;
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {IBPool} from 'interfaces/IBPool.sol';
interface IBFactory {
/**
* @notice Emitted when creating a new pool
* @param caller The caller of the function that will be set as the controller
* @param bPool The address of the new pool
*/
event LOG_NEW_POOL(address indexed caller, address indexed bPool);
/**
* @notice Emitted when setting the BDao address
* @param caller The caller of the set BDao function
* @param bDao The address of the new BDao
*/
event LOG_BDAO(address indexed caller, address indexed bDao);
/**
* @notice Thrown when setting a variable to address zero
*/
error BFactory_AddressZero();
/**
* @notice Thrown when caller is not BDao address
*/
error BFactory_NotBDao();
/**
* @notice Creates a new BPool, assigning the caller as the pool controller
* @param name The name of the Pool ERC20 token
* @param symbol The symbol of the Pool ERC20 token
* @return bPool The new BPool
*/
function newBPool(string memory name, string memory symbol) external returns (IBPool bPool);
/**
* @notice Sets the BDao address in the factory
* @param bDao The new BDao address
*/
function setBDao(address bDao) external;
/**
* @notice Collects the fees of a pool and transfers it to BDao address
* @param bPool The address of the pool to collect fees from
*/
function collect(IBPool bPool) external;
/**
* @notice Checks if an address is a BPool created from this factory
* @param bPool The address to check
* @return isBPool True if the address is a BPool, False otherwise
*/
function isBPool(address bPool) external view returns (bool isBPool);
/**
* @notice Gets the BDao address
* @return bDao The address of the BDao
*/
function getBDao() external view returns (address bDao);
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
interface IBPool is IERC20 {
/**
* @dev Struct for token records.
* @param bound If token is bound to pool.
* @param index Internal index of token array.
* @param denorm Denormalized weight of token.
*/
struct Record {
bool bound;
uint256 index;
uint256 denorm;
}
/**
* @notice Emitted when a swap is executed
* @param caller The caller of the swap function
* @param tokenIn The address of the token being swapped in
* @param tokenOut The address of the token being swapped out
* @param tokenAmountIn The amount of tokenIn being swapped in
* @param tokenAmountOut The amount of tokenOut being swapped out
*/
event LOG_SWAP(
address indexed caller,
address indexed tokenIn,
address indexed tokenOut,
uint256 tokenAmountIn,
uint256 tokenAmountOut
);
/**
* @notice Emitted when a join operation is executed
* @param caller The caller of the function
* @param tokenIn The address of the token being sent to the pool
* @param tokenAmountIn The balance of the token being sent to the pool
*/
event LOG_JOIN(address indexed caller, address indexed tokenIn, uint256 tokenAmountIn);
/**
* @notice Emitted when a token amount is removed from the pool
* @param caller The caller of the function
* @param tokenOut The address of the token being removed from the pool
* @param tokenAmountOut The amount of the token being removed from the pool
*/
event LOG_EXIT(address indexed caller, address indexed tokenOut, uint256 tokenAmountOut);
/**
* @notice Emitted when a call is executed on the pool
* @param sig The signature of the function selector being called
* @param caller The caller of the function
* @param data The complete data of the call
*/
event LOG_CALL(bytes4 indexed sig, address indexed caller, bytes data) anonymous;
/**
* @notice Thrown when setting a variable to address zero
*/
error BPool_AddressZero();
/**
* @notice Thrown when a reentrant call is made
*/
error BPool_Reentrancy();
/**
* @notice Thrown when the pool is finalized
*/
error BPool_PoolIsFinalized();
/**
* @notice Thrown when the caller is not the controller
*/
error BPool_CallerIsNotController();
/**
* @notice Thrown when the pool is not finalized
*/
error BPool_FeeBelowMinimum();
/**
* @notice Thrown when the fee to set is above the maximum
*/
error BPool_FeeAboveMaximum();
/**
* @notice Thrown when the tokens array is below the minimum
*/
error BPool_TokensBelowMinimum();
/**
* @notice Thrown when the token is already bound in the pool
*/
error BPool_TokenAlreadyBound();
/**
* @notice Thrown when the tokens array is above the maximum
*/
error BPool_TokensAboveMaximum();
/**
* @notice Thrown when the weight to set is below the minimum
*/
error BPool_WeightBelowMinimum();
/**
* @notice Thrown when the weight to set is above the maximum
*/
error BPool_WeightAboveMaximum();
/**
* @notice Thrown when the balance to add is below the minimum
*/
error BPool_BalanceBelowMinimum();
/**
* @notice Thrown when the total weight is above the maximum
*/
error BPool_TotalWeightAboveMaximum();
/**
* @notice Thrown when the ratio between the pool token amount and the total supply is zero
*/
error BPool_InvalidPoolRatio();
/**
* @notice Thrown when the calculated token amount in is zero
*/
error BPool_InvalidTokenAmountIn();
/**
* @notice Thrown when the token amount in is above maximum amount in allowed by the caller
*/
error BPool_TokenAmountInAboveMaxAmountIn();
/**
* @notice Thrown when the calculated token amount out is zero
*/
error BPool_InvalidTokenAmountOut();
/**
* @notice Thrown when the token amount out is below minimum amount out allowed by the caller
*/
error BPool_TokenAmountOutBelowMinAmountOut();
/**
* @notice Thrown when the token is not bound in the pool
*/
error BPool_TokenNotBound();
/**
* @notice Thrown when the pool is not finalized
*/
error BPool_PoolNotFinalized();
/**
* @notice Thrown when the token amount in surpasses the maximum in ratio allowed by the pool
*/
error BPool_TokenAmountInAboveMaxRatio();
/**
* @notice Thrown when the spot price before or after the swap is above the max allowed by the caller
*/
error BPool_SpotPriceAboveMaxPrice();
/**
* @notice Thrown when the token amount out is below the minimum out allowed by the caller
*/
error BPool_TokenAmountOutBelowMinOut();
/**
* @notice Thrown when the spot price after the swap is below the spot price before the swap
*/
error BPool_SpotPriceAfterBelowSpotPriceBefore();
/**
* @notice Thrown when the spot price before the swap is above the ratio between the two tokens in the pool
*/
error BPool_SpotPriceBeforeAboveTokenRatio();
/**
* @notice Thrown when the token amount out surpasses the maximum out allowed by the pool
*/
error BPool_TokenAmountOutAboveMaxOut();
/**
* @notice Thrown when the pool token amount out is below the minimum pool token amount out allowed by the caller
*/
error BPool_PoolAmountOutBelowMinPoolAmountOut();
/**
* @notice Thrown when the calculated pool token amount in is zero
*/
error BPool_InvalidPoolAmountIn();
/**
* @notice Thrown when the pool token amount in is above the maximum amount in allowed by the caller
*/
error BPool_PoolAmountInAboveMaxPoolAmountIn();
/**
* @notice Sets the new swap fee
* @param swapFee The new swap fee
*/
function setSwapFee(uint256 swapFee) external;
/**
* @notice Sets the new controller
* @param manager The new controller
*/
function setController(address manager) external;
/**
* @notice Finalize the pool, removing the restrictions on the pool
*/
function finalize() external;
/**
* @notice Binds a token to the pool
* @param token The address of the token to bind
* @param balance The balance of the token to bind
* @param denorm The denormalized weight of the token to bind
*/
function bind(address token, uint256 balance, uint256 denorm) external;
/**
* @notice Unbinds a token from the pool
* @param token The address of the token to unbind
*/
function unbind(address token) external;
/**
* @notice Joins a pool, providing each token in the pool with a proportional amount
* @param poolAmountOut The amount of pool tokens to mint
* @param maxAmountsIn The maximum amount of tokens to send to the pool
*/
function joinPool(uint256 poolAmountOut, uint256[] calldata maxAmountsIn) external;
/**
* @notice Exits a pool, receiving each token in the pool with a proportional amount
* @param poolAmountIn The amount of pool tokens to burn
* @param minAmountsOut The minimum amount of tokens to receive from the pool
*/
function exitPool(uint256 poolAmountIn, uint256[] calldata minAmountsOut) external;
/**
* @notice Swaps an exact amount of tokens in for an amount of tokens out
* @param tokenIn The address of the token to swap in
* @param tokenAmountIn The amount of token to swap in
* @param tokenOut The address of the token to swap out
* @param minAmountOut The minimum amount of token to receive from the swap
* @param maxPrice The maximum price to pay for the swap
* @return tokenAmountOut The amount of token swapped out
* @return spotPriceAfter The spot price after the swap
*/
function swapExactAmountIn(
address tokenIn,
uint256 tokenAmountIn,
address tokenOut,
uint256 minAmountOut,
uint256 maxPrice
) external returns (uint256 tokenAmountOut, uint256 spotPriceAfter);
/**
* @notice Swaps as many tokens in as needed for an exact amount of tokens out
* @param tokenIn The address of the token to swap in
* @param maxAmountIn The maximum amount of token to swap in
* @param tokenOut The address of the token to swap out
* @param tokenAmountOut The amount of token to swap out
* @param maxPrice The maximum price to pay for the swap
* @return tokenAmountIn The amount of token swapped in
* @return spotPriceAfter The spot price after the swap
*/
function swapExactAmountOut(
address tokenIn,
uint256 maxAmountIn,
address tokenOut,
uint256 tokenAmountOut,
uint256 maxPrice
) external returns (uint256 tokenAmountIn, uint256 spotPriceAfter);
/**
* @notice Gets the spot price of tokenIn in terms of tokenOut
* @param tokenIn The address of the token to swap in
* @param tokenOut The address of the token to swap out
* @return spotPrice The spot price of the swap
*/
function getSpotPrice(address tokenIn, address tokenOut) external view returns (uint256 spotPrice);
/**
* @notice Gets the spot price of tokenIn in terms of tokenOut without the fee
* @param tokenIn The address of the token to swap in
* @param tokenOut The address of the token to swap out
* @return spotPrice The spot price of the swap without the fee
*/
function getSpotPriceSansFee(address tokenIn, address tokenOut) external view returns (uint256 spotPrice);
/**
* @notice Gets the finalized status of the pool
* @return isFinalized True if the pool is finalized, False otherwise
*/
function isFinalized() external view returns (bool isFinalized);
/**
* @notice Gets the bound status of a token
* @param t The address of the token to check
* @return isBound True if the token is bound, False otherwise
*/
function isBound(address t) external view returns (bool isBound);
/**
* @notice Gets the number of tokens in the pool
* @return numTokens The number of tokens in the pool
*/
function getNumTokens() external view returns (uint256 numTokens);
/**
* @notice Gets the current array of tokens in the pool, while the pool is not finalized
* @return tokens The array of tokens in the pool
*/
function getCurrentTokens() external view returns (address[] memory tokens);
/**
* @notice Gets the final array of tokens in the pool, after finalization
* @return tokens The array of tokens in the pool
*/
function getFinalTokens() external view returns (address[] memory tokens);
/**
* @notice Gets the denormalized weight of a token in the pool
* @param token The address of the token to check
* @return denormWeight The denormalized weight of the token in the pool
*/
function getDenormalizedWeight(address token) external view returns (uint256 denormWeight);
/**
* @notice Gets the total denormalized weight of the pool
* @return totalDenormWeight The total denormalized weight of the pool
*/
function getTotalDenormalizedWeight() external view returns (uint256 totalDenormWeight);
/**
* @notice Gets the normalized weight of a token in the pool
* @param token The address of the token to check
* @return normWeight The normalized weight of the token in the pool
*/
function getNormalizedWeight(address token) external view returns (uint256 normWeight);
/**
* @notice Gets the Pool's ERC20 balance of a token
* @param token The address of the token to check
* @return balance The Pool's ERC20 balance of the token
*/
function getBalance(address token) external view returns (uint256 balance);
/**
* @notice Gets the swap fee of the pool
* @return swapFee The swap fee of the pool
*/
function getSwapFee() external view returns (uint256 swapFee);
/**
* @notice Gets the controller of the pool
* @return controller The controller of the pool
*/
function getController() external view returns (address controller);
/**
* @notice Gets the BFactory address that deployed the pool
* @return factory The address of the factory
*/
// solhint-disable-next-line style-guide-casing
function FACTORY() external view returns (address factory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC1271 standard signature validation method for
* contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
*/
interface IERC1271 {
/**
* @dev Should return whether the signature provided is valid for the provided data
* @param hash Hash of the data to be signed
* @param signature Signature byte array associated with _data
*/
function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}
// SPDX-License-Identifier: MIT
// Vendored from OpenZeppelin contracts with minor modifications:
// - Modified Solidity version
// - Formatted code
// - Added `name`, `symbol` and `decimals` function declarations
// <https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/token/ERC20/IERC20.sol>
pragma solidity >=0.7.6 <0.9.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the number of decimals the token uses.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(
address owner,
address spender
) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.25;
import {IERC20} from '@cowprotocol/interfaces/IERC20.sol';
import {GPv2Interaction} from '@cowprotocol/libraries/GPv2Interaction.sol';
import {GPv2Trade} from '@cowprotocol/libraries/GPv2Trade.sol';
/**
* @title ISettlement
* @notice External interface of CoW Protocol's SolutionSettler contract.
*/
interface ISettlement {
/**
* @notice Settles a batch of trades.
* @param tokens The tokens that are traded in the batch.
* @param clearingPrices The clearing prices of the trades.
* @param trades The trades to settle.
* @param interactions The interactions to execute.
*/
function settle(
IERC20[] calldata tokens,
uint256[] calldata clearingPrices,
GPv2Trade.Data[] calldata trades,
GPv2Interaction.Data[][3] calldata interactions
) external;
/**
* @return domainSeparator The domain separator for IERC1271 signature
* @dev Immutable value, would not change on chain forks
*/
function domainSeparator() external view returns (bytes32 domainSeparator);
/**
* @return vaultRelayer The address that'll use the pool liquidity in CoWprotocol swaps
* @dev Address that will transfer and transferFrom the pool. Has an infinite allowance.
*/
function vaultRelayer() external view returns (address vaultRelayer);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev An operation with an ERC20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data);
if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
* @dev Standard ERC20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
*/
interface IERC20Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC20InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC20InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
* @param spender Address that may be allowed to operate on tokens without being their owner.
* @param allowance Amount of tokens a `spender` is allowed to operate with.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC20InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `spender` to be approved. Used in approvals.
* @param spender Address that may be allowed to operate on tokens without being their owner.
*/
error ERC20InvalidSpender(address spender);
}
/**
* @dev Standard ERC721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
*/
interface IERC721Errors {
/**
* @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
* Used in balance queries.
* @param owner Address of the current owner of a token.
*/
error ERC721InvalidOwner(address owner);
/**
* @dev Indicates a `tokenId` whose `owner` is the zero address.
* @param tokenId Identifier number of a token.
*/
error ERC721NonexistentToken(uint256 tokenId);
/**
* @dev Indicates an error related to the ownership over a particular token. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param tokenId Identifier number of a token.
* @param owner Address of the current owner of a token.
*/
error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC721InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC721InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param tokenId Identifier number of a token.
*/
error ERC721InsufficientApproval(address operator, uint256 tokenId);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC721InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC721InvalidOperator(address operator);
}
/**
* @dev Standard ERC1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
*/
interface IERC1155Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
* @param tokenId Identifier number of a token.
*/
error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC1155InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC1155InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param owner Address of the current owner of a token.
*/
error ERC1155MissingApprovalForAll(address operator, address owner);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC1155InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC1155InvalidOperator(address operator);
/**
* @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
* Used in batch transfers.
* @param idsLength Length of the array of token identifiers
* @param valuesLength Length of the array of token amounts
*/
error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}
{
"compilationTarget": {
"src/contracts/BCoWPool.sol": "BCoWPool"
},
"evmVersion": "cancun",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 500
},
"remappings": [
":@composable-cow/=node_modules/composable-cow/",
":@cow-amm/=node_modules/cow-amm/src/",
":@cowprotocol/=node_modules/@cowprotocol/contracts/src/contracts/",
":@openzeppelin/=node_modules/@openzeppelin/",
":composable-cow/=node_modules/composable-cow/",
":contracts/=src/contracts/",
":cow-amm/=node_modules/cow-amm/",
":cowprotocol/=node_modules/@cowprotocol/contracts/src/",
":ds-test/=node_modules/ds-test/src/",
":erc4626-tests/=node_modules/composable-cow/lib/@openzeppelin/lib/erc4626-tests/",
":forge-gas-snapshot/=node_modules/forge-gas-snapshot/src/",
":forge-std/=node_modules/forge-std/src/",
":interfaces/=src/interfaces/",
":lib/openzeppelin/=node_modules/@openzeppelin/",
":libraries/=src/libraries/",
":murky/=node_modules/composable-cow/lib/murky/src/",
":openzeppelin-contracts/=node_modules/composable-cow/lib/murky/lib/openzeppelin-contracts/",
":safe/=node_modules/composable-cow/lib/safe/contracts/",
":solmate/=node_modules/solmate/src/",
"lib/composable-cow:@openzeppelin/=node_modules/cow-amm/lib/openzeppelin/contracts/",
"lib/composable-cow:@openzeppelin/contracts/=node_modules/cow-amm/lib/openzeppelin/contracts/",
"lib/composable-cow:cowprotocol/=node_modules/cow-amm/lib/composable-cow/lib/cowprotocol/src/",
"lib/composable-cow:safe/=node_modules/cow-amm/lib/composable-cow/lib/safe/contracts/"
]
}[{"inputs":[{"internalType":"address","name":"cowSolutionSettler","type":"address"},{"internalType":"bytes32","name":"appData","type":"bytes32"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AppDataDoesNotMatch","type":"error"},{"inputs":[],"name":"BCoWPool_FeeMustBeZero","type":"error"},{"inputs":[],"name":"BCoWPool_InvalidBalanceMarker","type":"error"},{"inputs":[],"name":"BCoWPool_InvalidOperation","type":"error"},{"inputs":[],"name":"BCoWPool_OrderValidityTooLong","type":"error"},{"inputs":[],"name":"BCoWPool_ReceiverIsNotBCoWPool","type":"error"},{"inputs":[],"name":"BNum_AddOverflow","type":"error"},{"inputs":[],"name":"BNum_BPowBaseTooHigh","type":"error"},{"inputs":[],"name":"BNum_BPowBaseTooLow","type":"error"},{"inputs":[],"name":"BNum_DivInternal","type":"error"},{"inputs":[],"name":"BNum_DivZero","type":"error"},{"inputs":[],"name":"BNum_MulOverflow","type":"error"},{"inputs":[],"name":"BNum_SubUnderflow","type":"error"},{"inputs":[],"name":"BPool_AddressZero","type":"error"},{"inputs":[],"name":"BPool_BalanceBelowMinimum","type":"error"},{"inputs":[],"name":"BPool_CallerIsNotController","type":"error"},{"inputs":[],"name":"BPool_FeeAboveMaximum","type":"error"},{"inputs":[],"name":"BPool_FeeBelowMinimum","type":"error"},{"inputs":[],"name":"BPool_InvalidPoolAmountIn","type":"error"},{"inputs":[],"name":"BPool_InvalidPoolRatio","type":"error"},{"inputs":[],"name":"BPool_InvalidTokenAmountIn","type":"error"},{"inputs":[],"name":"BPool_InvalidTokenAmountOut","type":"error"},{"inputs":[],"name":"BPool_PoolAmountInAboveMaxPoolAmountIn","type":"error"},{"inputs":[],"name":"BPool_PoolAmountOutBelowMinPoolAmountOut","type":"error"},{"inputs":[],"name":"BPool_PoolIsFinalized","type":"error"},{"inputs":[],"name":"BPool_PoolNotFinalized","type":"error"},{"inputs":[],"name":"BPool_Reentrancy","type":"error"},{"inputs":[],"name":"BPool_SpotPriceAboveMaxPrice","type":"error"},{"inputs":[],"name":"BPool_SpotPriceAfterBelowSpotPriceBefore","type":"error"},{"inputs":[],"name":"BPool_SpotPriceBeforeAboveTokenRatio","type":"error"},{"inputs":[],"name":"BPool_TokenAlreadyBound","type":"error"},{"inputs":[],"name":"BPool_TokenAmountInAboveMaxAmountIn","type":"error"},{"inputs":[],"name":"BPool_TokenAmountInAboveMaxRatio","type":"error"},{"inputs":[],"name":"BPool_TokenAmountOutAboveMaxOut","type":"error"},{"inputs":[],"name":"BPool_TokenAmountOutBelowMinAmountOut","type":"error"},{"inputs":[],"name":"BPool_TokenAmountOutBelowMinOut","type":"error"},{"inputs":[],"name":"BPool_TokenNotBound","type":"error"},{"inputs":[],"name":"BPool_TokensAboveMaximum","type":"error"},{"inputs":[],"name":"BPool_TokensBelowMinimum","type":"error"},{"inputs":[],"name":"BPool_TotalWeightAboveMaximum","type":"error"},{"inputs":[],"name":"BPool_WeightAboveMaximum","type":"error"},{"inputs":[],"name":"BPool_WeightBelowMinimum","type":"error"},{"inputs":[],"name":"CommitOutsideOfSettlement","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"OrderDoesNotMatchCommitmentHash","type":"error"},{"inputs":[],"name":"OrderDoesNotMatchMessageHash","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"bCoWPool","type":"address"}],"name":"COWAMMPoolCreated","type":"event"},{"anonymous":true,"inputs":[{"indexed":true,"internalType":"bytes4","name":"sig","type":"bytes4"},{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"LOG_CALL","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"tokenOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenAmountOut","type":"uint256"}],"name":"LOG_EXIT","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"tokenIn","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenAmountIn","type":"uint256"}],"name":"LOG_JOIN","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"tokenIn","type":"address"},{"indexed":true,"internalType":"address","name":"tokenOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenAmountIn","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokenAmountOut","type":"uint256"}],"name":"LOG_SWAP","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"APP_DATA","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"BONE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"BPOW_PRECISION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"EXIT_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FACTORY","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INIT_POOL_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_BOUND_TOKENS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_BPOW_BASE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_IN_RATIO","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_ORDER_DURATION","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_OUT_RATIO","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_TOTAL_WEIGHT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_WEIGHT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_BALANCE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_BOUND_TOKENS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_BPOW_BASE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_WEIGHT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SOLUTION_SETTLER","outputs":[{"internalType":"contract ISettlement","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SOLUTION_SETTLER_DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VAULT_RELAYER","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"denorm","type":"uint256"}],"name":"bind","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenBalanceIn","type":"uint256"},{"internalType":"uint256","name":"tokenWeightIn","type":"uint256"},{"internalType":"uint256","name":"tokenBalanceOut","type":"uint256"},{"internalType":"uint256","name":"tokenWeightOut","type":"uint256"},{"internalType":"uint256","name":"tokenAmountOut","type":"uint256"},{"internalType":"uint256","name":"swapFee","type":"uint256"}],"name":"calcInGivenOut","outputs":[{"internalType":"uint256","name":"tokenAmountIn","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenBalanceIn","type":"uint256"},{"internalType":"uint256","name":"tokenWeightIn","type":"uint256"},{"internalType":"uint256","name":"tokenBalanceOut","type":"uint256"},{"internalType":"uint256","name":"tokenWeightOut","type":"uint256"},{"internalType":"uint256","name":"tokenAmountIn","type":"uint256"},{"internalType":"uint256","name":"swapFee","type":"uint256"}],"name":"calcOutGivenIn","outputs":[{"internalType":"uint256","name":"tokenAmountOut","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenBalanceIn","type":"uint256"},{"internalType":"uint256","name":"tokenWeightIn","type":"uint256"},{"internalType":"uint256","name":"tokenBalanceOut","type":"uint256"},{"internalType":"uint256","name":"tokenWeightOut","type":"uint256"},{"internalType":"uint256","name":"swapFee","type":"uint256"}],"name":"calcSpotPrice","outputs":[{"internalType":"uint256","name":"spotPrice","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"}],"name":"commit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"decreaseApproval","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"poolAmountIn","type":"uint256"},{"internalType":"uint256[]","name":"minAmountsOut","type":"uint256[]"}],"name":"exitPool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"finalize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"getBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getController","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCurrentTokens","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"getDenormalizedWeight","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFinalTokens","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"getNormalizedWeight","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getNumTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"address","name":"tokenOut","type":"address"}],"name":"getSpotPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"address","name":"tokenOut","type":"address"}],"name":"getSpotPriceSansFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSwapFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTotalDenormalizedWeight","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"increaseApproval","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isBound","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isFinalized","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"isValidSignature","outputs":[{"internalType":"bytes4","name":"magicValue","type":"bytes4"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"poolAmountOut","type":"uint256"},{"internalType":"uint256[]","name":"maxAmountsIn","type":"uint256[]"}],"name":"joinPool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newController","type":"address"}],"name":"setController","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"swapFee","type":"uint256"}],"name":"setSwapFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"tokenAmountIn","type":"uint256"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint256","name":"maxPrice","type":"uint256"}],"name":"swapExactAmountIn","outputs":[{"internalType":"uint256","name":"tokenAmountOut","type":"uint256"},{"internalType":"uint256","name":"spotPriceAfter","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"maxAmountIn","type":"uint256"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"tokenAmountOut","type":"uint256"},{"internalType":"uint256","name":"maxPrice","type":"uint256"}],"name":"swapExactAmountOut","outputs":[{"internalType":"uint256","name":"tokenAmountIn","type":"uint256"},{"internalType":"uint256","name":"spotPriceAfter","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"unbind","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"contract IERC20","name":"sellToken","type":"address"},{"internalType":"contract IERC20","name":"buyToken","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"sellAmount","type":"uint256"},{"internalType":"uint256","name":"buyAmount","type":"uint256"},{"internalType":"uint32","name":"validTo","type":"uint32"},{"internalType":"bytes32","name":"appData","type":"bytes32"},{"internalType":"uint256","name":"feeAmount","type":"uint256"},{"internalType":"bytes32","name":"kind","type":"bytes32"},{"internalType":"bool","name":"partiallyFillable","type":"bool"},{"internalType":"bytes32","name":"sellTokenBalance","type":"bytes32"},{"internalType":"bytes32","name":"buyTokenBalance","type":"bytes32"}],"internalType":"struct GPv2Order.Data","name":"order","type":"tuple"}],"name":"verify","outputs":[],"stateMutability":"view","type":"function"}]