// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
function getRoundData(
uint80 _roundId
) external view returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
function latestRoundData()
external
view
returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import "./Errors.sol" as CastingErrors;
import { MAX_UINT128, MAX_UINT40 } from "../Common.sol";
import { uMAX_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { uMAX_SD59x18 } from "../sd59x18/Constants.sol";
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { uMAX_UD2x18 } from "../ud2x18/Constants.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "./ValueType.sol";
/// @notice Casts a UD60x18 number into SD1x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(UD60x18 x) pure returns (SD1x18 result) {
uint256 xUint = UD60x18.unwrap(x);
if (xUint > uint256(int256(uMAX_SD1x18))) {
revert CastingErrors.PRBMath_UD60x18_IntoSD1x18_Overflow(x);
}
result = SD1x18.wrap(int64(uint64(xUint)));
}
/// @notice Casts a UD60x18 number into UD2x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_UD2x18`.
function intoUD2x18(UD60x18 x) pure returns (UD2x18 result) {
uint256 xUint = UD60x18.unwrap(x);
if (xUint > uMAX_UD2x18) {
revert CastingErrors.PRBMath_UD60x18_IntoUD2x18_Overflow(x);
}
result = UD2x18.wrap(uint64(xUint));
}
/// @notice Casts a UD60x18 number into SD59x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD59x18`.
function intoSD59x18(UD60x18 x) pure returns (SD59x18 result) {
uint256 xUint = UD60x18.unwrap(x);
if (xUint > uint256(uMAX_SD59x18)) {
revert CastingErrors.PRBMath_UD60x18_IntoSD59x18_Overflow(x);
}
result = SD59x18.wrap(int256(xUint));
}
/// @notice Casts a UD60x18 number into uint128.
/// @dev This is basically an alias for {unwrap}.
function intoUint256(UD60x18 x) pure returns (uint256 result) {
result = UD60x18.unwrap(x);
}
/// @notice Casts a UD60x18 number into uint128.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT128`.
function intoUint128(UD60x18 x) pure returns (uint128 result) {
uint256 xUint = UD60x18.unwrap(x);
if (xUint > MAX_UINT128) {
revert CastingErrors.PRBMath_UD60x18_IntoUint128_Overflow(x);
}
result = uint128(xUint);
}
/// @notice Casts a UD60x18 number into uint40.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(UD60x18 x) pure returns (uint40 result) {
uint256 xUint = UD60x18.unwrap(x);
if (xUint > MAX_UINT40) {
revert CastingErrors.PRBMath_UD60x18_IntoUint40_Overflow(x);
}
result = uint40(xUint);
}
/// @notice Alias for {wrap}.
function ud(uint256 x) pure returns (UD60x18 result) {
result = UD60x18.wrap(x);
}
/// @notice Alias for {wrap}.
function ud60x18(uint256 x) pure returns (UD60x18 result) {
result = UD60x18.wrap(x);
}
/// @notice Unwraps a UD60x18 number into uint256.
function unwrap(UD60x18 x) pure returns (uint256 result) {
result = UD60x18.unwrap(x);
}
/// @notice Wraps a uint256 number into the UD60x18 value type.
function wrap(uint256 x) pure returns (UD60x18 result) {
result = UD60x18.wrap(x);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import {Tiers} from "./Tiers.sol";
import {PurchasingCenter} from "./PurchasingCenter.sol";
import {IERC20} from "../lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {console} from "forge-std/console.sol";
import {ReentrancyGuard} from "../lib/openzeppelin-contracts/contracts/security/ReentrancyGuard.sol";
import {UnrenounceableOwnable2Step} from "../lib/uranium-token/src/UnrenounceableOwnable2Step.sol";
import {Pausable} from "../lib/uranium-token/src/Pausable.sol";
import {SafeERC20} from "../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
contract ClaimingCenter is
Tiers,
UnrenounceableOwnable2Step,
Pausable,
ReentrancyGuard
{
using SafeERC20 for IERC20;
IERC20 public commodity;
address payable purchasingCenterAddress;
PurchasingCenter public purchasingCenter;
/** @dev For accounting how many tokens are already claimed. And to determine if a user has already claimed. */
mapping(address => mapping(Tier => uint256))
public address_to_tier_to_tokens_claimed;
/** @dev For accounting the total amount of tokens claimed. */
mapping(Tier => uint256) public tier_to_tokens_claimed;
/** @dev For accounting how many eth a user has already been refunded. */
mapping(address => mapping(Tier => uint256))
public address_to_tier_eth_to_refund_claimed;
/** @dev For accounting the total refunds of a tier. */
mapping(Tier => uint256) public tier_to_refunds_claimed;
/** @dev For keeping track of the commodity reserves in this contract.
We do not simply use commodity.balanceOf(address(this)) for our reserve accounting to avoid external manipulation via deposits. */
uint256 public commodityReserves;
/** @dev For keeping track of the Eth reserves in this contract.
We do not simply use address(this).balance for our reserve accounting to avoid external manipulation via deposits. */
uint256 public refundReserves;
bool public claimsStarted;
bool public refundsStarted;
event EntireEthBalanceWithdrawn(address to, uint256 amount);
event EthReservesDeposited(uint256 amount);
event EthReservesWithdrawn(address to, uint256 amount);
event RefundsClaimed(uint256 tier, address guy, uint256 refundAmount);
event RefundsStarted(uint256 time);
event CommodityDeposited(uint256 amount);
event CommodityWithdraw(address to, uint256 amount);
event CommodityClaimed(uint256 tier, address guy, uint256 claimAmount);
event ClaimsStarted(uint256 time);
constructor(address _commodity, address _purchasingCenter) {
commodity = IERC20(_commodity);
// Since you cannot have state variables in interfaces,
// To access the public state variables in purchasingCenter we will need the whole contract.
purchasingCenterAddress = payable(_purchasingCenter);
purchasingCenter = PurchasingCenter(purchasingCenterAddress);
claimsStarted = false;
}
/**
* ╭────────────────────────────────────────╮
* │ * * * onlyOwner start functions. * * * │
* ╰────────────────────────────────────────╯
*/
modifier whenClaimsNotStarted() {
require(claimsStarted == false, "Claims started already!");
_;
}
modifier whenClaimsStarted() {
require(claimsStarted == true, "Claims not started yet!");
_;
}
modifier whenRefundsNotStarted() {
require(refundsStarted == false, "Refunds started already!");
_;
}
modifier whenRefundsStarted() {
require(refundsStarted == true, "Refunds not started yet!");
_;
}
function startClaims()
external
whenNotPaused
onlyOwner
whenClaimsNotStarted
{
// once started it's impossible unstart / pause.
claimsStarted = true;
emit ClaimsStarted(block.timestamp);
}
function startRefunds()
external
whenNotPaused
onlyOwner
whenRefundsNotStarted
{
// once started it's impossible unstart / pause.
refundsStarted = true;
emit RefundsStarted(block.timestamp);
}
/**
* ╭───────────────────────────────────────────╮
* │ * * * Miscellaneous view functions. * * * │
* ╰───────────────────────────────────────────╯
*/
/** @dev Function that checks how much a user has bought in a given tier
* from the purchasingCenter contract. The point of this function is to offload
* as many mentions of purchasingCenter as possible.
*/
function getTokensBoughtByUserAndTier(
address user,
uint256 tier
) public view returns (uint256) {
uint256 amount = purchasingCenter.getTokensBoughtByUserAndTier(
user,
tier
);
return amount;
}
function getRefundClaimedByUserAndTier(
address guy,
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 refundsClaimed = address_to_tier_eth_to_refund_claimed[guy][
_tier
];
return refundsClaimed;
}
function getTokensClaimedByUserAndTier(
address guy,
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 tokensClaimed = address_to_tier_to_tokens_claimed[guy][_tier];
return tokensClaimed;
}
function getTokensClaimedByTier(
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 tokensClaimed = tier_to_tokens_claimed[_tier];
return tokensClaimed;
}
/**
* ╭─────────────────────────────────────────────╮
* │ * * * User claim commodity functions. * * * │
* ╰─────────────────────────────────────────────╯
*/
/** @dev Users call this function to see how much they can claim (eventually) for a given tier.
* This function does not care about whether a tier has been unlocked.
* If they have already claimed, it will return 0.
*/
function claimable(
address user,
uint256 tier
) public view returns (uint256) {
Tier _tier = _t(tier);
uint256 amount = getTokensBoughtByUserAndTier(user, tier);
uint256 claimed = address_to_tier_to_tokens_claimed[user][_tier];
uint256 forClaim = amount - claimed;
return forClaim;
}
/** @dev This function tells whether a tier has been unlocked.
*/
function claimablesUnlocked(uint256 tier) external view returns (bool) {
(, , uint256 lockupTime, ) = purchasingCenter.getTierDetails(tier);
uint256 startTime = purchasingCenter.startTime();
uint256 purchaseWindow = purchasingCenter.purchaseWindow();
if (block.timestamp >= startTime + purchaseWindow + lockupTime) {
return true;
} else {
return false;
}
}
/** @dev The function for users to claim their tokens of a given tier.
*/
function claim(
uint256 tier
)
external
whenNotPaused
nonReentrant
whenClaimsStarted
returns (bool success)
{
Tier _tier = _t(tier);
address guy = msg.sender;
uint256 boughtAmount = getTokensBoughtByUserAndTier(guy, tier);
require(boughtAmount > 0, "No amount bought");
uint256 amountClaimed = address_to_tier_to_tokens_claimed[guy][_tier];
require(amountClaimed == 0, "Claimed already!");
uint256 claimableAmount = claimable(guy, tier);
require(
claimableAmount <= commodity.balanceOf(address(this)),
"Insufficient reserves"
);
(, , uint256 lockupTime, ) = purchasingCenter.getTierDetails(tier);
uint256 startTime = purchasingCenter.startTime();
uint256 purchaseWindow = purchasingCenter.purchaseWindow();
require(
block.timestamp >= lockupTime + startTime + purchaseWindow,
"Not yet unlocked!"
);
success = commodity.transfer(guy, claimableAmount);
require(success, "Transfer didn't go through");
if (success) {
address_to_tier_to_tokens_claimed[guy][_tier] += claimableAmount;
tier_to_tokens_claimed[_tier] += claimableAmount;
commodityReserves -= claimableAmount;
emit CommodityClaimed(tier, guy, claimableAmount);
return success;
}
}
/**
* ╭─────────────────────────────────────────────────────────────────╮
* │ * * * OnlyOwner Commodity Deposit & Withdrawal functions. * * * │
* ╰─────────────────────────────────────────────────────────────────╯
*/
/** @dev Function for the owner to deposit the commodity.
*/
function depositCommodity(
uint256 amount
) external onlyOwner returns (bool success) {
success = commodity.transferFrom(
msg.sender,
payable(address(this)),
amount
);
require(success, "Not deposited!");
if (success) {
commodityReserves += amount;
emit CommodityDeposited(amount);
return success;
}
}
/** @dev Function for the owner to withdraw a certain amount
* of the commodities living in this contract.
*/
function withdrawCommodity(
address to,
uint256 amount
) external nonReentrant onlyOwner returns (bool success) {
success = commodity.transfer(to, amount);
require(success, "transfer not successful!");
if (success) {
commodityReserves -= amount;
emit CommodityWithdraw(to, amount);
return success;
}
}
/** @dev Function for the owner to withdraw the entire balance of the commodity
* living in this contract.
*/
function withdrawEntireCommodityBalance(
address to
) external nonReentrant onlyOwner returns (bool success) {
uint256 amount = commodity.balanceOf(address(this));
success = commodity.transfer(to, amount);
require(success, "transfer not successful!");
if (success) {
commodityReserves = 0;
emit CommodityWithdraw(to, amount);
return success;
}
}
/** @dev View function to see balance of commodities sitting in this contract.
Not the commodityReserves. */
function commodityBalance() external view returns (uint256 amount) {
amount = commodity.balanceOf(address(this));
return amount;
}
/**
* ╭────────────────────────────────────╮
* │ * * * User refund functions. * * * │
* ╰────────────────────────────────────╯
*/
/** @dev This function checks how much a user is entitled to claim.
* Note that claims are not dependent on whether the commodity tokens themselves are unlocked.
*/
function refundClaimable(
address guy,
uint256 tier
) public view returns (uint256 amount) {
amount = purchasingCenter.refundAmount(guy, tier);
return amount;
}
/** @dev User can claim their refunds here.
* Note that claims are not dependent on whether the commodity tokens themselves are unlocked.
*/
function claimRefunds(
uint256 tier
)
external
whenNotPaused
whenRefundsStarted
nonReentrant
returns (bool success)
{
address guy = msg.sender;
uint256 refundAmount = refundClaimable(guy, tier);
Tier _tier = _t(tier);
require(
address_to_tier_eth_to_refund_claimed[guy][_tier] == 0,
"claimRefunds(): already refunded!"
);
require(
address(this).balance > 0,
"claimRefunds(): insufficient balances"
);
require(refundAmount > 0, "Nothing to refund!");
address_to_tier_eth_to_refund_claimed[guy][_tier] = refundAmount; // Updates the amount of refund a guy has claimed.
tier_to_refunds_claimed[_tier] += refundAmount; // Updates the total amount of refunds claimed in a tier.
refundReserves -= refundAmount;
(success, ) = payable(guy).call{value: refundAmount}("");
require(success, "refund didn't go through!");
if (success) {
return success;
}
emit RefundsClaimed(tier, guy, refundAmount);
}
/** @dev View function to see the total amount of refunds of a tier.
*/
function tierRefundsClaimable(
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 totalContribution = purchasingCenter.tier_to_totalContribution(
_tier
);
uint256 refundsClaimed = tier_to_refunds_claimed[_tier];
uint256 unclaimed_refunds = totalContribution - refundsClaimed;
return unclaimed_refunds;
}
/**
* ╭─────────────────────────────────────────────────────────╮
* │ * * * Commodity deposit and withdrawal functions. * * * │
* ╰─────────────────────────────────────────────────────────╯
*/
/** @dev Payable function to deposit ETH to reserves.
*/
function depositEthToReserves()
external
payable
nonReentrant
returns (bool success)
{
uint256 eth_in = msg.value;
require(eth_in > 0, "Eth deposit cannot be 0");
refundReserves += eth_in;
emit EthReservesDeposited(eth_in);
return true;
}
/** @dev */
// Function to withdraw ETH from reserves (onlyOwner)
function withdrawEthReserves(
address to,
uint256 amount
) external onlyOwner nonReentrant returns (bool success) {
require(amount > 0, "Withdrawal amount must be greater than 0");
require(amount <= refundReserves, "Insufficient balance in reserves");
(success, ) = payable(to).call{value: amount}("");
require(success, "Eth not withdrawn!");
if (success) {
refundReserves -= amount;
emit EthReservesWithdrawn(to, amount);
return success;
}
}
/** @dev Function to withdraw all ETH from reserves (onlyOwner).
*/
function withdrawEntireEthBalance(
address to
) external onlyOwner nonReentrant returns (bool success) {
uint256 balance = address(this).balance;
require(balance > 0, "No balance in reserves to withdraw");
(success, ) = payable(to).call{value: balance}("");
require(success, "Eth not withdrawn!");
if (success) {
refundReserves = 0;
emit EntireEthBalanceWithdrawn(to, balance);
return success;
}
}
/**
* ╭───────────────────────────────────────────────────╮
* │ * * * Eth deposit and withdrawal functions. * * * │
* ╰───────────────────────────────────────────────────╯
*/
// Helper function to check the balance of this contract - not the reserves.
function ethBalance() external view returns (uint256 balance) {
balance = address(this).balance;
return balance;
}
// Function to receive Ether. msg.data must be empty
receive() external payable {
revert("Improper deposit method");
}
// Fallback function is called when msg.data is not empty
fallback() external payable {
revert("Improper deposit method");
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
// Common.sol
//
// Common mathematical functions needed by both SD59x18 and UD60x18. Note that these global functions do not
// always operate with SD59x18 and UD60x18 numbers.
/*//////////////////////////////////////////////////////////////////////////
CUSTOM ERRORS
//////////////////////////////////////////////////////////////////////////*/
/// @notice Thrown when the resultant value in {mulDiv} overflows uint256.
error PRBMath_MulDiv_Overflow(uint256 x, uint256 y, uint256 denominator);
/// @notice Thrown when the resultant value in {mulDiv18} overflows uint256.
error PRBMath_MulDiv18_Overflow(uint256 x, uint256 y);
/// @notice Thrown when one of the inputs passed to {mulDivSigned} is `type(int256).min`.
error PRBMath_MulDivSigned_InputTooSmall();
/// @notice Thrown when the resultant value in {mulDivSigned} overflows int256.
error PRBMath_MulDivSigned_Overflow(int256 x, int256 y);
/*//////////////////////////////////////////////////////////////////////////
CONSTANTS
//////////////////////////////////////////////////////////////////////////*/
/// @dev The maximum value a uint128 number can have.
uint128 constant MAX_UINT128 = type(uint128).max;
/// @dev The maximum value a uint40 number can have.
uint40 constant MAX_UINT40 = type(uint40).max;
/// @dev The unit number, which the decimal precision of the fixed-point types.
uint256 constant UNIT = 1e18;
/// @dev The unit number inverted mod 2^256.
uint256 constant UNIT_INVERSE = 78156646155174841979727994598816262306175212592076161876661_508869554232690281;
/// @dev The the largest power of two that divides the decimal value of `UNIT`. The logarithm of this value is the least significant
/// bit in the binary representation of `UNIT`.
uint256 constant UNIT_LPOTD = 262144;
/*//////////////////////////////////////////////////////////////////////////
FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/
/// @notice Calculates the binary exponent of x using the binary fraction method.
/// @dev Has to use 192.64-bit fixed-point numbers. See https://ethereum.stackexchange.com/a/96594/24693.
/// @param x The exponent as an unsigned 192.64-bit fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function exp2(uint256 x) pure returns (uint256 result) {
unchecked {
// Start from 0.5 in the 192.64-bit fixed-point format.
result = 0x800000000000000000000000000000000000000000000000;
// The following logic multiplies the result by $\sqrt{2^{-i}}$ when the bit at position i is 1. Key points:
//
// 1. Intermediate results will not overflow, as the starting point is 2^191 and all magic factors are under 2^65.
// 2. The rationale for organizing the if statements into groups of 8 is gas savings. If the result of performing
// a bitwise AND operation between x and any value in the array [0x80; 0x40; 0x20; 0x10; 0x08; 0x04; 0x02; 0x01] is 1,
// we know that `x & 0xFF` is also 1.
if (x & 0xFF00000000000000 > 0) {
if (x & 0x8000000000000000 > 0) {
result = (result * 0x16A09E667F3BCC909) >> 64;
}
if (x & 0x4000000000000000 > 0) {
result = (result * 0x1306FE0A31B7152DF) >> 64;
}
if (x & 0x2000000000000000 > 0) {
result = (result * 0x1172B83C7D517ADCE) >> 64;
}
if (x & 0x1000000000000000 > 0) {
result = (result * 0x10B5586CF9890F62A) >> 64;
}
if (x & 0x800000000000000 > 0) {
result = (result * 0x1059B0D31585743AE) >> 64;
}
if (x & 0x400000000000000 > 0) {
result = (result * 0x102C9A3E778060EE7) >> 64;
}
if (x & 0x200000000000000 > 0) {
result = (result * 0x10163DA9FB33356D8) >> 64;
}
if (x & 0x100000000000000 > 0) {
result = (result * 0x100B1AFA5ABCBED61) >> 64;
}
}
if (x & 0xFF000000000000 > 0) {
if (x & 0x80000000000000 > 0) {
result = (result * 0x10058C86DA1C09EA2) >> 64;
}
if (x & 0x40000000000000 > 0) {
result = (result * 0x1002C605E2E8CEC50) >> 64;
}
if (x & 0x20000000000000 > 0) {
result = (result * 0x100162F3904051FA1) >> 64;
}
if (x & 0x10000000000000 > 0) {
result = (result * 0x1000B175EFFDC76BA) >> 64;
}
if (x & 0x8000000000000 > 0) {
result = (result * 0x100058BA01FB9F96D) >> 64;
}
if (x & 0x4000000000000 > 0) {
result = (result * 0x10002C5CC37DA9492) >> 64;
}
if (x & 0x2000000000000 > 0) {
result = (result * 0x1000162E525EE0547) >> 64;
}
if (x & 0x1000000000000 > 0) {
result = (result * 0x10000B17255775C04) >> 64;
}
}
if (x & 0xFF0000000000 > 0) {
if (x & 0x800000000000 > 0) {
result = (result * 0x1000058B91B5BC9AE) >> 64;
}
if (x & 0x400000000000 > 0) {
result = (result * 0x100002C5C89D5EC6D) >> 64;
}
if (x & 0x200000000000 > 0) {
result = (result * 0x10000162E43F4F831) >> 64;
}
if (x & 0x100000000000 > 0) {
result = (result * 0x100000B1721BCFC9A) >> 64;
}
if (x & 0x80000000000 > 0) {
result = (result * 0x10000058B90CF1E6E) >> 64;
}
if (x & 0x40000000000 > 0) {
result = (result * 0x1000002C5C863B73F) >> 64;
}
if (x & 0x20000000000 > 0) {
result = (result * 0x100000162E430E5A2) >> 64;
}
if (x & 0x10000000000 > 0) {
result = (result * 0x1000000B172183551) >> 64;
}
}
if (x & 0xFF00000000 > 0) {
if (x & 0x8000000000 > 0) {
result = (result * 0x100000058B90C0B49) >> 64;
}
if (x & 0x4000000000 > 0) {
result = (result * 0x10000002C5C8601CC) >> 64;
}
if (x & 0x2000000000 > 0) {
result = (result * 0x1000000162E42FFF0) >> 64;
}
if (x & 0x1000000000 > 0) {
result = (result * 0x10000000B17217FBB) >> 64;
}
if (x & 0x800000000 > 0) {
result = (result * 0x1000000058B90BFCE) >> 64;
}
if (x & 0x400000000 > 0) {
result = (result * 0x100000002C5C85FE3) >> 64;
}
if (x & 0x200000000 > 0) {
result = (result * 0x10000000162E42FF1) >> 64;
}
if (x & 0x100000000 > 0) {
result = (result * 0x100000000B17217F8) >> 64;
}
}
if (x & 0xFF000000 > 0) {
if (x & 0x80000000 > 0) {
result = (result * 0x10000000058B90BFC) >> 64;
}
if (x & 0x40000000 > 0) {
result = (result * 0x1000000002C5C85FE) >> 64;
}
if (x & 0x20000000 > 0) {
result = (result * 0x100000000162E42FF) >> 64;
}
if (x & 0x10000000 > 0) {
result = (result * 0x1000000000B17217F) >> 64;
}
if (x & 0x8000000 > 0) {
result = (result * 0x100000000058B90C0) >> 64;
}
if (x & 0x4000000 > 0) {
result = (result * 0x10000000002C5C860) >> 64;
}
if (x & 0x2000000 > 0) {
result = (result * 0x1000000000162E430) >> 64;
}
if (x & 0x1000000 > 0) {
result = (result * 0x10000000000B17218) >> 64;
}
}
if (x & 0xFF0000 > 0) {
if (x & 0x800000 > 0) {
result = (result * 0x1000000000058B90C) >> 64;
}
if (x & 0x400000 > 0) {
result = (result * 0x100000000002C5C86) >> 64;
}
if (x & 0x200000 > 0) {
result = (result * 0x10000000000162E43) >> 64;
}
if (x & 0x100000 > 0) {
result = (result * 0x100000000000B1721) >> 64;
}
if (x & 0x80000 > 0) {
result = (result * 0x10000000000058B91) >> 64;
}
if (x & 0x40000 > 0) {
result = (result * 0x1000000000002C5C8) >> 64;
}
if (x & 0x20000 > 0) {
result = (result * 0x100000000000162E4) >> 64;
}
if (x & 0x10000 > 0) {
result = (result * 0x1000000000000B172) >> 64;
}
}
if (x & 0xFF00 > 0) {
if (x & 0x8000 > 0) {
result = (result * 0x100000000000058B9) >> 64;
}
if (x & 0x4000 > 0) {
result = (result * 0x10000000000002C5D) >> 64;
}
if (x & 0x2000 > 0) {
result = (result * 0x1000000000000162E) >> 64;
}
if (x & 0x1000 > 0) {
result = (result * 0x10000000000000B17) >> 64;
}
if (x & 0x800 > 0) {
result = (result * 0x1000000000000058C) >> 64;
}
if (x & 0x400 > 0) {
result = (result * 0x100000000000002C6) >> 64;
}
if (x & 0x200 > 0) {
result = (result * 0x10000000000000163) >> 64;
}
if (x & 0x100 > 0) {
result = (result * 0x100000000000000B1) >> 64;
}
}
if (x & 0xFF > 0) {
if (x & 0x80 > 0) {
result = (result * 0x10000000000000059) >> 64;
}
if (x & 0x40 > 0) {
result = (result * 0x1000000000000002C) >> 64;
}
if (x & 0x20 > 0) {
result = (result * 0x10000000000000016) >> 64;
}
if (x & 0x10 > 0) {
result = (result * 0x1000000000000000B) >> 64;
}
if (x & 0x8 > 0) {
result = (result * 0x10000000000000006) >> 64;
}
if (x & 0x4 > 0) {
result = (result * 0x10000000000000003) >> 64;
}
if (x & 0x2 > 0) {
result = (result * 0x10000000000000001) >> 64;
}
if (x & 0x1 > 0) {
result = (result * 0x10000000000000001) >> 64;
}
}
// In the code snippet below, two operations are executed simultaneously:
//
// 1. The result is multiplied by $(2^n + 1)$, where $2^n$ represents the integer part, and the additional 1
// accounts for the initial guess of 0.5. This is achieved by subtracting from 191 instead of 192.
// 2. The result is then converted to an unsigned 60.18-decimal fixed-point format.
//
// The underlying logic is based on the relationship $2^{191-ip} = 2^{ip} / 2^{191}$, where $ip$ denotes the,
// integer part, $2^n$.
result *= UNIT;
result >>= (191 - (x >> 64));
}
}
/// @notice Finds the zero-based index of the first 1 in the binary representation of x.
///
/// @dev See the note on "msb" in this Wikipedia article: https://en.wikipedia.org/wiki/Find_first_set
///
/// Each step in this implementation is equivalent to this high-level code:
///
/// ```solidity
/// if (x >= 2 ** 128) {
/// x >>= 128;
/// result += 128;
/// }
/// ```
///
/// Where 128 is replaced with each respective power of two factor. See the full high-level implementation here:
/// https://gist.github.com/PaulRBerg/f932f8693f2733e30c4d479e8e980948
///
/// The Yul instructions used below are:
///
/// - "gt" is "greater than"
/// - "or" is the OR bitwise operator
/// - "shl" is "shift left"
/// - "shr" is "shift right"
///
/// @param x The uint256 number for which to find the index of the most significant bit.
/// @return result The index of the most significant bit as a uint256.
/// @custom:smtchecker abstract-function-nondet
function msb(uint256 x) pure returns (uint256 result) {
// 2^128
assembly ("memory-safe") {
let factor := shl(7, gt(x, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^64
assembly ("memory-safe") {
let factor := shl(6, gt(x, 0xFFFFFFFFFFFFFFFF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^32
assembly ("memory-safe") {
let factor := shl(5, gt(x, 0xFFFFFFFF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^16
assembly ("memory-safe") {
let factor := shl(4, gt(x, 0xFFFF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^8
assembly ("memory-safe") {
let factor := shl(3, gt(x, 0xFF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^4
assembly ("memory-safe") {
let factor := shl(2, gt(x, 0xF))
x := shr(factor, x)
result := or(result, factor)
}
// 2^2
assembly ("memory-safe") {
let factor := shl(1, gt(x, 0x3))
x := shr(factor, x)
result := or(result, factor)
}
// 2^1
// No need to shift x any more.
assembly ("memory-safe") {
let factor := gt(x, 0x1)
result := or(result, factor)
}
}
/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev Credits to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - The denominator must not be zero.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as a uint256.
/// @param y The multiplier as a uint256.
/// @param denominator The divisor as a uint256.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function mulDiv(uint256 x, uint256 y, uint256 denominator) pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512-bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly ("memory-safe") {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
unchecked {
return prod0 / denominator;
}
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
if (prod1 >= denominator) {
revert PRBMath_MulDiv_Overflow(x, y, denominator);
}
////////////////////////////////////////////////////////////////////////////
// 512 by 256 division
////////////////////////////////////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly ("memory-safe") {
// Compute remainder using the mulmod Yul instruction.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512-bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
unchecked {
// Calculate the largest power of two divisor of the denominator using the unary operator ~. This operation cannot overflow
// because the denominator cannot be zero at this point in the function execution. The result is always >= 1.
// For more detail, see https://cs.stackexchange.com/q/138556/92363.
uint256 lpotdod = denominator & (~denominator + 1);
uint256 flippedLpotdod;
assembly ("memory-safe") {
// Factor powers of two out of denominator.
denominator := div(denominator, lpotdod)
// Divide [prod1 prod0] by lpotdod.
prod0 := div(prod0, lpotdod)
// Get the flipped value `2^256 / lpotdod`. If the `lpotdod` is zero, the flipped value is one.
// `sub(0, lpotdod)` produces the two's complement version of `lpotdod`, which is equivalent to flipping all the bits.
// However, `div` interprets this value as an unsigned value: https://ethereum.stackexchange.com/q/147168/24693
flippedLpotdod := add(div(sub(0, lpotdod), lpotdod), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * flippedLpotdod;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
}
}
/// @notice Calculates x*y÷1e18 with 512-bit precision.
///
/// @dev A variant of {mulDiv} with constant folding, i.e. in which the denominator is hard coded to 1e18.
///
/// Notes:
/// - The body is purposely left uncommented; to understand how this works, see the documentation in {mulDiv}.
/// - The result is rounded toward zero.
/// - We take as an axiom that the result cannot be `MAX_UINT256` when x and y solve the following system of equations:
///
/// $$
/// \begin{cases}
/// x * y = MAX\_UINT256 * UNIT \\
/// (x * y) \% UNIT \geq \frac{UNIT}{2}
/// \end{cases}
/// $$
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as an unsigned 60.18-decimal fixed-point number.
/// @param y The multiplier as an unsigned 60.18-decimal fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function mulDiv18(uint256 x, uint256 y) pure returns (uint256 result) {
uint256 prod0;
uint256 prod1;
assembly ("memory-safe") {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
if (prod1 == 0) {
unchecked {
return prod0 / UNIT;
}
}
if (prod1 >= UNIT) {
revert PRBMath_MulDiv18_Overflow(x, y);
}
uint256 remainder;
assembly ("memory-safe") {
remainder := mulmod(x, y, UNIT)
result :=
mul(
or(
div(sub(prod0, remainder), UNIT_LPOTD),
mul(sub(prod1, gt(remainder, prod0)), add(div(sub(0, UNIT_LPOTD), UNIT_LPOTD), 1))
),
UNIT_INVERSE
)
}
}
/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev This is an extension of {mulDiv} for signed numbers, which works by computing the signs and the absolute values separately.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - None of the inputs can be `type(int256).min`.
/// - The result must fit in int256.
///
/// @param x The multiplicand as an int256.
/// @param y The multiplier as an int256.
/// @param denominator The divisor as an int256.
/// @return result The result as an int256.
/// @custom:smtchecker abstract-function-nondet
function mulDivSigned(int256 x, int256 y, int256 denominator) pure returns (int256 result) {
if (x == type(int256).min || y == type(int256).min || denominator == type(int256).min) {
revert PRBMath_MulDivSigned_InputTooSmall();
}
// Get hold of the absolute values of x, y and the denominator.
uint256 xAbs;
uint256 yAbs;
uint256 dAbs;
unchecked {
xAbs = x < 0 ? uint256(-x) : uint256(x);
yAbs = y < 0 ? uint256(-y) : uint256(y);
dAbs = denominator < 0 ? uint256(-denominator) : uint256(denominator);
}
// Compute the absolute value of x*y÷denominator. The result must fit in int256.
uint256 resultAbs = mulDiv(xAbs, yAbs, dAbs);
if (resultAbs > uint256(type(int256).max)) {
revert PRBMath_MulDivSigned_Overflow(x, y);
}
// Get the signs of x, y and the denominator.
uint256 sx;
uint256 sy;
uint256 sd;
assembly ("memory-safe") {
// "sgt" is the "signed greater than" assembly instruction and "sub(0,1)" is -1 in two's complement.
sx := sgt(x, sub(0, 1))
sy := sgt(y, sub(0, 1))
sd := sgt(denominator, sub(0, 1))
}
// XOR over sx, sy and sd. What this does is to check whether there are 1 or 3 negative signs in the inputs.
// If there are, the result should be negative. Otherwise, it should be positive.
unchecked {
result = sx ^ sy ^ sd == 0 ? -int256(resultAbs) : int256(resultAbs);
}
}
/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - If x is not a perfect square, the result is rounded down.
/// - Credits to OpenZeppelin for the explanations in comments below.
///
/// @param x The uint256 number for which to calculate the square root.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function sqrt(uint256 x) pure returns (uint256 result) {
if (x == 0) {
return 0;
}
// For our first guess, we calculate the biggest power of 2 which is smaller than the square root of x.
//
// We know that the "msb" (most significant bit) of x is a power of 2 such that we have:
//
// $$
// msb(x) <= x <= 2*msb(x)$
// $$
//
// We write $msb(x)$ as $2^k$, and we get:
//
// $$
// k = log_2(x)
// $$
//
// Thus, we can write the initial inequality as:
//
// $$
// 2^{log_2(x)} <= x <= 2*2^{log_2(x)+1} \\
// sqrt(2^k) <= sqrt(x) < sqrt(2^{k+1}) \\
// 2^{k/2} <= sqrt(x) < 2^{(k+1)/2} <= 2^{(k/2)+1}
// $$
//
// Consequently, $2^{log_2(x) /2} is a good first approximation of sqrt(x) with at least one correct bit.
uint256 xAux = uint256(x);
result = 1;
if (xAux >= 2 ** 128) {
xAux >>= 128;
result <<= 64;
}
if (xAux >= 2 ** 64) {
xAux >>= 64;
result <<= 32;
}
if (xAux >= 2 ** 32) {
xAux >>= 32;
result <<= 16;
}
if (xAux >= 2 ** 16) {
xAux >>= 16;
result <<= 8;
}
if (xAux >= 2 ** 8) {
xAux >>= 8;
result <<= 4;
}
if (xAux >= 2 ** 4) {
xAux >>= 4;
result <<= 2;
}
if (xAux >= 2 ** 2) {
result <<= 1;
}
// At this point, `result` is an estimation with at least one bit of precision. We know the true value has at
// most 128 bits, since it is the square root of a uint256. Newton's method converges quadratically (precision
// doubles at every iteration). We thus need at most 7 iteration to turn our partial result with one bit of
// precision into the expected uint128 result.
unchecked {
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
// If x is not a perfect square, round the result toward zero.
uint256 roundedResult = x / result;
if (result >= roundedResult) {
result = roundedResult;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import { UD2x18 } from "./ValueType.sol";
/// @dev Euler's number as a UD2x18 number.
UD2x18 constant E = UD2x18.wrap(2_718281828459045235);
/// @dev The maximum value a UD2x18 number can have.
uint64 constant uMAX_UD2x18 = 18_446744073709551615;
UD2x18 constant MAX_UD2x18 = UD2x18.wrap(uMAX_UD2x18);
/// @dev PI as a UD2x18 number.
UD2x18 constant PI = UD2x18.wrap(3_141592653589793238);
/// @dev The unit number, which gives the decimal precision of UD2x18.
uint256 constant uUNIT = 1e18;
UD2x18 constant UNIT = UD2x18.wrap(1e18);
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import { uMAX_SD59x18, uMIN_SD59x18, uUNIT } from "./Constants.sol";
import { PRBMath_SD59x18_Convert_Overflow, PRBMath_SD59x18_Convert_Underflow } from "./Errors.sol";
import { SD59x18 } from "./ValueType.sol";
/// @notice Converts a simple integer to SD59x18 by multiplying it by `UNIT`.
///
/// @dev Requirements:
/// - x must be greater than or equal to `MIN_SD59x18 / UNIT`.
/// - x must be less than or equal to `MAX_SD59x18 / UNIT`.
///
/// @param x The basic integer to convert.
/// @param result The same number converted to SD59x18.
function convert(int256 x) pure returns (SD59x18 result) {
if (x < uMIN_SD59x18 / uUNIT) {
revert PRBMath_SD59x18_Convert_Underflow(x);
}
if (x > uMAX_SD59x18 / uUNIT) {
revert PRBMath_SD59x18_Convert_Overflow(x);
}
unchecked {
result = SD59x18.wrap(x * uUNIT);
}
}
/// @notice Converts an SD59x18 number to a simple integer by dividing it by `UNIT`.
/// @dev The result is rounded toward zero.
/// @param x The SD59x18 number to convert.
/// @return result The same number as a simple integer.
function convert(SD59x18 x) pure returns (int256 result) {
result = SD59x18.unwrap(x) / uUNIT;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(address from, address to, uint256 amount) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import { UD60x18 } from "./ValueType.sol";
/// @notice Thrown when ceiling a number overflows UD60x18.
error PRBMath_UD60x18_Ceil_Overflow(UD60x18 x);
/// @notice Thrown when converting a basic integer to the fixed-point format overflows UD60x18.
error PRBMath_UD60x18_Convert_Overflow(uint256 x);
/// @notice Thrown when taking the natural exponent of a base greater than 133_084258667509499441.
error PRBMath_UD60x18_Exp_InputTooBig(UD60x18 x);
/// @notice Thrown when taking the binary exponent of a base greater than 192e18.
error PRBMath_UD60x18_Exp2_InputTooBig(UD60x18 x);
/// @notice Thrown when taking the geometric mean of two numbers and multiplying them overflows UD60x18.
error PRBMath_UD60x18_Gm_Overflow(UD60x18 x, UD60x18 y);
/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD1x18.
error PRBMath_UD60x18_IntoSD1x18_Overflow(UD60x18 x);
/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD59x18.
error PRBMath_UD60x18_IntoSD59x18_Overflow(UD60x18 x);
/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in UD2x18.
error PRBMath_UD60x18_IntoUD2x18_Overflow(UD60x18 x);
/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint128.
error PRBMath_UD60x18_IntoUint128_Overflow(UD60x18 x);
/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint40.
error PRBMath_UD60x18_IntoUint40_Overflow(UD60x18 x);
/// @notice Thrown when taking the logarithm of a number less than 1.
error PRBMath_UD60x18_Log_InputTooSmall(UD60x18 x);
/// @notice Thrown when calculating the square root overflows UD60x18.
error PRBMath_UD60x18_Sqrt_Overflow(UD60x18 x);
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import { wrap } from "./Casting.sol";
import { SD59x18 } from "./ValueType.sol";
/// @notice Implements the checked addition operation (+) in the SD59x18 type.
function add(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
return wrap(x.unwrap() + y.unwrap());
}
/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and(SD59x18 x, int256 bits) pure returns (SD59x18 result) {
return wrap(x.unwrap() & bits);
}
/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and2(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
return wrap(x.unwrap() & y.unwrap());
}
/// @notice Implements the equal (=) operation in the SD59x18 type.
function eq(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() == y.unwrap();
}
/// @notice Implements the greater than operation (>) in the SD59x18 type.
function gt(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() > y.unwrap();
}
/// @notice Implements the greater than or equal to operation (>=) in the SD59x18 type.
function gte(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() >= y.unwrap();
}
/// @notice Implements a zero comparison check function in the SD59x18 type.
function isZero(SD59x18 x) pure returns (bool result) {
result = x.unwrap() == 0;
}
/// @notice Implements the left shift operation (<<) in the SD59x18 type.
function lshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
result = wrap(x.unwrap() << bits);
}
/// @notice Implements the lower than operation (<) in the SD59x18 type.
function lt(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() < y.unwrap();
}
/// @notice Implements the lower than or equal to operation (<=) in the SD59x18 type.
function lte(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() <= y.unwrap();
}
/// @notice Implements the unchecked modulo operation (%) in the SD59x18 type.
function mod(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
result = wrap(x.unwrap() % y.unwrap());
}
/// @notice Implements the not equal operation (!=) in the SD59x18 type.
function neq(SD59x18 x, SD59x18 y) pure returns (bool result) {
result = x.unwrap() != y.unwrap();
}
/// @notice Implements the NOT (~) bitwise operation in the SD59x18 type.
function not(SD59x18 x) pure returns (SD59x18 result) {
result = wrap(~x.unwrap());
}
/// @notice Implements the OR (|) bitwise operation in the SD59x18 type.
function or(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
result = wrap(x.unwrap() | y.unwrap());
}
/// @notice Implements the right shift operation (>>) in the SD59x18 type.
function rshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
result = wrap(x.unwrap() >> bits);
}
/// @notice Implements the checked subtraction operation (-) in the SD59x18 type.
function sub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
result = wrap(x.unwrap() - y.unwrap());
}
/// @notice Implements the checked unary minus operation (-) in the SD59x18 type.
function unary(SD59x18 x) pure returns (SD59x18 result) {
result = wrap(-x.unwrap());
}
/// @notice Implements the unchecked addition operation (+) in the SD59x18 type.
function uncheckedAdd(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
unchecked {
result = wrap(x.unwrap() + y.unwrap());
}
}
/// @notice Implements the unchecked subtraction operation (-) in the SD59x18 type.
function uncheckedSub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
unchecked {
result = wrap(x.unwrap() - y.unwrap());
}
}
/// @notice Implements the unchecked unary minus operation (-) in the SD59x18 type.
function uncheckedUnary(SD59x18 x) pure returns (SD59x18 result) {
unchecked {
result = wrap(-x.unwrap());
}
}
/// @notice Implements the XOR (^) bitwise operation in the SD59x18 type.
function xor(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
result = wrap(x.unwrap() ^ y.unwrap());
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
interface IChainlinkPriceConsumer {
function getLatestData() external view returns (int);
function getHistoricalPrice(uint80 roundId) external view returns (int256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import { wrap } from "./Casting.sol";
import {
uEXP_MAX_INPUT,
uEXP2_MAX_INPUT,
uHALF_UNIT,
uLOG2_10,
uLOG2_E,
uMAX_UD60x18,
uMAX_WHOLE_UD60x18,
UNIT,
uUNIT,
uUNIT_SQUARED,
ZERO
} from "./Constants.sol";
import { UD60x18 } from "./ValueType.sol";
/*//////////////////////////////////////////////////////////////////////////
MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/
/// @notice Calculates the arithmetic average of x and y using the following formula:
///
/// $$
/// avg(x, y) = (x & y) + ((xUint ^ yUint) / 2)
/// $$
//
/// In English, this is what this formula does:
///
/// 1. AND x and y.
/// 2. Calculate half of XOR x and y.
/// 3. Add the two results together.
///
/// This technique is known as SWAR, which stands for "SIMD within a register". You can read more about it here:
/// https://devblogs.microsoft.com/oldnewthing/20220207-00/?p=106223
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The arithmetic average as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function avg(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
uint256 yUint = y.unwrap();
unchecked {
result = wrap((xUint & yUint) + ((xUint ^ yUint) >> 1));
}
}
/// @notice Yields the smallest whole number greater than or equal to x.
///
/// @dev This is optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional
/// counterparts. See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to `MAX_WHOLE_UD60x18`.
///
/// @param x The UD60x18 number to ceil.
/// @param result The smallest whole number greater than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ceil(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
if (xUint > uMAX_WHOLE_UD60x18) {
revert Errors.PRBMath_UD60x18_Ceil_Overflow(x);
}
assembly ("memory-safe") {
// Equivalent to `x % UNIT`.
let remainder := mod(x, uUNIT)
// Equivalent to `UNIT - remainder`.
let delta := sub(uUNIT, remainder)
// Equivalent to `x + remainder > 0 ? delta : 0`.
result := add(x, mul(delta, gt(remainder, 0)))
}
}
/// @notice Divides two UD60x18 numbers, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @param x The numerator as a UD60x18 number.
/// @param y The denominator as a UD60x18 number.
/// @param result The quotient as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function div(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
result = wrap(Common.mulDiv(x.unwrap(), uUNIT, y.unwrap()));
}
/// @notice Calculates the natural exponent of x using the following formula:
///
/// $$
/// e^x = 2^{x * log_2{e}}
/// $$
///
/// @dev Requirements:
/// - x must be less than 133_084258667509499441.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
// This check prevents values greater than 192e18 from being passed to {exp2}.
if (xUint > uEXP_MAX_INPUT) {
revert Errors.PRBMath_UD60x18_Exp_InputTooBig(x);
}
unchecked {
// Inline the fixed-point multiplication to save gas.
uint256 doubleUnitProduct = xUint * uLOG2_E;
result = exp2(wrap(doubleUnitProduct / uUNIT));
}
}
/// @notice Calculates the binary exponent of x using the binary fraction method.
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693
///
/// Requirements:
/// - x must be less than 192e18.
/// - The result must fit in UD60x18.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp2(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
// Numbers greater than or equal to 192e18 don't fit in the 192.64-bit format.
if (xUint > uEXP2_MAX_INPUT) {
revert Errors.PRBMath_UD60x18_Exp2_InputTooBig(x);
}
// Convert x to the 192.64-bit fixed-point format.
uint256 x_192x64 = (xUint << 64) / uUNIT;
// Pass x to the {Common.exp2} function, which uses the 192.64-bit fixed-point number representation.
result = wrap(Common.exp2(x_192x64));
}
/// @notice Yields the greatest whole number less than or equal to x.
/// @dev Optimized for fractional value inputs, because every whole value has (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
/// @param x The UD60x18 number to floor.
/// @param result The greatest whole number less than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function floor(UD60x18 x) pure returns (UD60x18 result) {
assembly ("memory-safe") {
// Equivalent to `x % UNIT`.
let remainder := mod(x, uUNIT)
// Equivalent to `x - remainder > 0 ? remainder : 0)`.
result := sub(x, mul(remainder, gt(remainder, 0)))
}
}
/// @notice Yields the excess beyond the floor of x using the odd function definition.
/// @dev See https://en.wikipedia.org/wiki/Fractional_part.
/// @param x The UD60x18 number to get the fractional part of.
/// @param result The fractional part of x as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function frac(UD60x18 x) pure returns (UD60x18 result) {
assembly ("memory-safe") {
result := mod(x, uUNIT)
}
}
/// @notice Calculates the geometric mean of x and y, i.e. $\sqrt{x * y}$, rounding down.
///
/// @dev Requirements:
/// - x * y must fit in UD60x18.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function gm(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
uint256 yUint = y.unwrap();
if (xUint == 0 || yUint == 0) {
return ZERO;
}
unchecked {
// Checking for overflow this way is faster than letting Solidity do it.
uint256 xyUint = xUint * yUint;
if (xyUint / xUint != yUint) {
revert Errors.PRBMath_UD60x18_Gm_Overflow(x, y);
}
// We don't need to multiply the result by `UNIT` here because the x*y product picked up a factor of `UNIT`
// during multiplication. See the comments in {Common.sqrt}.
result = wrap(Common.sqrt(xyUint));
}
}
/// @notice Calculates the inverse of x.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must not be zero.
///
/// @param x The UD60x18 number for which to calculate the inverse.
/// @return result The inverse as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function inv(UD60x18 x) pure returns (UD60x18 result) {
unchecked {
result = wrap(uUNIT_SQUARED / x.unwrap());
}
}
/// @notice Calculates the natural logarithm of x using the following formula:
///
/// $$
/// ln{x} = log_2{x} / log_2{e}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
/// - The precision isn't sufficiently fine-grained to return exactly `UNIT` when the input is `E`.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the natural logarithm.
/// @return result The natural logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ln(UD60x18 x) pure returns (UD60x18 result) {
unchecked {
// Inline the fixed-point multiplication to save gas. This is overflow-safe because the maximum value that
// {log2} can return is ~196_205294292027477728.
result = wrap(log2(x).unwrap() * uUNIT / uLOG2_E);
}
}
/// @notice Calculates the common logarithm of x using the following formula:
///
/// $$
/// log_{10}{x} = log_2{x} / log_2{10}
/// $$
///
/// However, if x is an exact power of ten, a hard coded value is returned.
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the common logarithm.
/// @return result The common logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log10(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
if (xUint < uUNIT) {
revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
}
// Note that the `mul` in this assembly block is the standard multiplication operation, not {UD60x18.mul}.
// prettier-ignore
assembly ("memory-safe") {
switch x
case 1 { result := mul(uUNIT, sub(0, 18)) }
case 10 { result := mul(uUNIT, sub(1, 18)) }
case 100 { result := mul(uUNIT, sub(2, 18)) }
case 1000 { result := mul(uUNIT, sub(3, 18)) }
case 10000 { result := mul(uUNIT, sub(4, 18)) }
case 100000 { result := mul(uUNIT, sub(5, 18)) }
case 1000000 { result := mul(uUNIT, sub(6, 18)) }
case 10000000 { result := mul(uUNIT, sub(7, 18)) }
case 100000000 { result := mul(uUNIT, sub(8, 18)) }
case 1000000000 { result := mul(uUNIT, sub(9, 18)) }
case 10000000000 { result := mul(uUNIT, sub(10, 18)) }
case 100000000000 { result := mul(uUNIT, sub(11, 18)) }
case 1000000000000 { result := mul(uUNIT, sub(12, 18)) }
case 10000000000000 { result := mul(uUNIT, sub(13, 18)) }
case 100000000000000 { result := mul(uUNIT, sub(14, 18)) }
case 1000000000000000 { result := mul(uUNIT, sub(15, 18)) }
case 10000000000000000 { result := mul(uUNIT, sub(16, 18)) }
case 100000000000000000 { result := mul(uUNIT, sub(17, 18)) }
case 1000000000000000000 { result := 0 }
case 10000000000000000000 { result := uUNIT }
case 100000000000000000000 { result := mul(uUNIT, 2) }
case 1000000000000000000000 { result := mul(uUNIT, 3) }
case 10000000000000000000000 { result := mul(uUNIT, 4) }
case 100000000000000000000000 { result := mul(uUNIT, 5) }
case 1000000000000000000000000 { result := mul(uUNIT, 6) }
case 10000000000000000000000000 { result := mul(uUNIT, 7) }
case 100000000000000000000000000 { result := mul(uUNIT, 8) }
case 1000000000000000000000000000 { result := mul(uUNIT, 9) }
case 10000000000000000000000000000 { result := mul(uUNIT, 10) }
case 100000000000000000000000000000 { result := mul(uUNIT, 11) }
case 1000000000000000000000000000000 { result := mul(uUNIT, 12) }
case 10000000000000000000000000000000 { result := mul(uUNIT, 13) }
case 100000000000000000000000000000000 { result := mul(uUNIT, 14) }
case 1000000000000000000000000000000000 { result := mul(uUNIT, 15) }
case 10000000000000000000000000000000000 { result := mul(uUNIT, 16) }
case 100000000000000000000000000000000000 { result := mul(uUNIT, 17) }
case 1000000000000000000000000000000000000 { result := mul(uUNIT, 18) }
case 10000000000000000000000000000000000000 { result := mul(uUNIT, 19) }
case 100000000000000000000000000000000000000 { result := mul(uUNIT, 20) }
case 1000000000000000000000000000000000000000 { result := mul(uUNIT, 21) }
case 10000000000000000000000000000000000000000 { result := mul(uUNIT, 22) }
case 100000000000000000000000000000000000000000 { result := mul(uUNIT, 23) }
case 1000000000000000000000000000000000000000000 { result := mul(uUNIT, 24) }
case 10000000000000000000000000000000000000000000 { result := mul(uUNIT, 25) }
case 100000000000000000000000000000000000000000000 { result := mul(uUNIT, 26) }
case 1000000000000000000000000000000000000000000000 { result := mul(uUNIT, 27) }
case 10000000000000000000000000000000000000000000000 { result := mul(uUNIT, 28) }
case 100000000000000000000000000000000000000000000000 { result := mul(uUNIT, 29) }
case 1000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 30) }
case 10000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 31) }
case 100000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 32) }
case 1000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 33) }
case 10000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 34) }
case 100000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 35) }
case 1000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 36) }
case 10000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 37) }
case 100000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 38) }
case 1000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 39) }
case 10000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 40) }
case 100000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 41) }
case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 42) }
case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 43) }
case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 44) }
case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 45) }
case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 46) }
case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 47) }
case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 48) }
case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 49) }
case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 50) }
case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 51) }
case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 52) }
case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 53) }
case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 54) }
case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 55) }
case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 56) }
case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 57) }
case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 58) }
case 100000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 59) }
default { result := uMAX_UD60x18 }
}
if (result.unwrap() == uMAX_UD60x18) {
unchecked {
// Inline the fixed-point division to save gas.
result = wrap(log2(x).unwrap() * uUNIT / uLOG2_10);
}
}
}
/// @notice Calculates the binary logarithm of x using the iterative approximation algorithm:
///
/// $$
/// log_2{x} = n + log_2{y}, \text{ where } y = x*2^{-n}, \ y \in [1, 2)
/// $$
///
/// For $0 \leq x \lt 1$, the input is inverted:
///
/// $$
/// log_2{x} = -log_2{\frac{1}{x}}
/// $$
///
/// @dev See https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
///
/// Notes:
/// - Due to the lossy precision of the iterative approximation, the results are not perfectly accurate to the last decimal.
///
/// Requirements:
/// - x must be greater than zero.
///
/// @param x The UD60x18 number for which to calculate the binary logarithm.
/// @return result The binary logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log2(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
if (xUint < uUNIT) {
revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
}
unchecked {
// Calculate the integer part of the logarithm.
uint256 n = Common.msb(xUint / uUNIT);
// This is the integer part of the logarithm as a UD60x18 number. The operation can't overflow because n
// n is at most 255 and UNIT is 1e18.
uint256 resultUint = n * uUNIT;
// Calculate $y = x * 2^{-n}$.
uint256 y = xUint >> n;
// If y is the unit number, the fractional part is zero.
if (y == uUNIT) {
return wrap(resultUint);
}
// Calculate the fractional part via the iterative approximation.
// The `delta >>= 1` part is equivalent to `delta /= 2`, but shifting bits is more gas efficient.
uint256 DOUBLE_UNIT = 2e18;
for (uint256 delta = uHALF_UNIT; delta > 0; delta >>= 1) {
y = (y * y) / uUNIT;
// Is y^2 >= 2e18 and so in the range [2e18, 4e18)?
if (y >= DOUBLE_UNIT) {
// Add the 2^{-m} factor to the logarithm.
resultUint += delta;
// Halve y, which corresponds to z/2 in the Wikipedia article.
y >>= 1;
}
}
result = wrap(resultUint);
}
}
/// @notice Multiplies two UD60x18 numbers together, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @dev See the documentation in {Common.mulDiv18}.
/// @param x The multiplicand as a UD60x18 number.
/// @param y The multiplier as a UD60x18 number.
/// @return result The product as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function mul(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
result = wrap(Common.mulDiv18(x.unwrap(), y.unwrap()));
}
/// @notice Raises x to the power of y.
///
/// For $1 \leq x \leq \infty$, the following standard formula is used:
///
/// $$
/// x^y = 2^{log_2{x} * y}
/// $$
///
/// For $0 \leq x \lt 1$, since the unsigned {log2} is undefined, an equivalent formula is used:
///
/// $$
/// i = \frac{1}{x}
/// w = 2^{log_2{i} * y}
/// x^y = \frac{1}{w}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2} and {mul}.
/// - Returns `UNIT` for 0^0.
/// - It may not perform well with very small values of x. Consider using SD59x18 as an alternative.
///
/// Requirements:
/// - Refer to the requirements in {exp2}, {log2}, and {mul}.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function pow(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
uint256 yUint = y.unwrap();
// If both x and y are zero, the result is `UNIT`. If just x is zero, the result is always zero.
if (xUint == 0) {
return yUint == 0 ? UNIT : ZERO;
}
// If x is `UNIT`, the result is always `UNIT`.
else if (xUint == uUNIT) {
return UNIT;
}
// If y is zero, the result is always `UNIT`.
if (yUint == 0) {
return UNIT;
}
// If y is `UNIT`, the result is always x.
else if (yUint == uUNIT) {
return x;
}
// If x is greater than `UNIT`, use the standard formula.
if (xUint > uUNIT) {
result = exp2(mul(log2(x), y));
}
// Conversely, if x is less than `UNIT`, use the equivalent formula.
else {
UD60x18 i = wrap(uUNIT_SQUARED / xUint);
UD60x18 w = exp2(mul(log2(i), y));
result = wrap(uUNIT_SQUARED / w.unwrap());
}
}
/// @notice Raises x (a UD60x18 number) to the power y (an unsigned basic integer) using the well-known
/// algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv18}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - The result must fit in UD60x18.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a uint256.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function powu(UD60x18 x, uint256 y) pure returns (UD60x18 result) {
// Calculate the first iteration of the loop in advance.
uint256 xUint = x.unwrap();
uint256 resultUint = y & 1 > 0 ? xUint : uUNIT;
// Equivalent to `for(y /= 2; y > 0; y /= 2)`.
for (y >>= 1; y > 0; y >>= 1) {
xUint = Common.mulDiv18(xUint, xUint);
// Equivalent to `y % 2 == 1`.
if (y & 1 > 0) {
resultUint = Common.mulDiv18(resultUint, xUint);
}
}
result = wrap(resultUint);
}
/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must be less than `MAX_UD60x18 / UNIT`.
///
/// @param x The UD60x18 number for which to calculate the square root.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function sqrt(UD60x18 x) pure returns (UD60x18 result) {
uint256 xUint = x.unwrap();
unchecked {
if (xUint > uMAX_UD60x18 / uUNIT) {
revert Errors.PRBMath_UD60x18_Sqrt_Overflow(x);
}
// Multiply x by `UNIT` to account for the factor of `UNIT` picked up when multiplying two UD60x18 numbers.
// In this case, the two numbers are both the square root.
result = wrap(Common.sqrt(xUint * uUNIT));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (access/Ownable2Step.sol)
pragma solidity ^0.8.0;
import "./Ownable.sol";
/**
* @dev Contract module which provides access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership} and {acceptOwnership}.
*
* This module is used through inheritance. It will make available all functions
* from parent (Ownable).
*/
abstract contract Ownable2Step is Ownable {
address private _pendingOwner;
event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);
/**
* @dev Returns the address of the pending owner.
*/
function pendingOwner() public view virtual returns (address) {
return _pendingOwner;
}
/**
* @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual override onlyOwner {
_pendingOwner = newOwner;
emit OwnershipTransferStarted(owner(), newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual override {
delete _pendingOwner;
super._transferOwnership(newOwner);
}
/**
* @dev The new owner accepts the ownership transfer.
*/
function acceptOwnership() public virtual {
address sender = _msgSender();
require(pendingOwner() == sender, "Ownable2Step: caller is not the new owner");
_transferOwnership(sender);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/** @dev This is based on OpenZeppelin's Pausable.
* Unfortunately it's only last updated v4.7.0 (security/Pausable.sol).
* So we have to manually update the contract ourselves.
*/
// import {Ownable} from "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";
import {UnrenounceableOwnable2Step} from "./UnrenounceableOwnable2Step.sol";
/**
* @dev A contract module enabling an authorized account to pause and unpause functionality.
*
* This module provides the `whenNotPaused` and `whenPaused` modifiers for functions.
* The whenNotPaused modifier is used for normal functions of an ERC20 token - transfer(), transferFrom() but also other
* functions such as issue() and redeem().
* The function of introducing these modifiers in the contract, is to pause all activity in the situation where something has gone wrong.
*/
// contract Pausable is Ownable {
contract Pausable is UnrenounceableOwnable2Step {
address public pauser;
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
/**
* @dev Emitted when the pauser address is updated.
* @param newAddress The new address assigned as the pauser.
*/
event PauserChanged(address indexed newAddress);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
pauser = msg.sender;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
* Requirements:
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
* Requirements:
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
* Requirements:
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
* Requirements:
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
/**
* @dev throws if called by any account other than the pauser
*/
modifier onlyPauser() {
require(msg.sender == pauser, "Pausable: caller is not the pauser");
_;
}
// Pausing
function pause() public onlyPauser returns (bool) {
_pause();
return (paused());
}
function unpause() public onlyPauser returns (bool) {
_unpause();
return (paused());
}
/**
* @dev update the pauser role - only the owner can call this function
* Requirements:
* - The newPauser must not be the zero address.
*/
function updatePauser(address _newPauser) external onlyOwner {
require(
_newPauser != address(0),
"Pausable: new pauser is the zero address"
);
pauser = _newPauser;
emit PauserChanged(pauser);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import {ERC20} from "../lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol";
import {IERC20} from "../lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {Ownable} from "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";
import {AggregatorV3Interface} from "../lib/chainlink/contracts/src/v0.8/interfaces/AggregatorV3Interface.sol";
import {IChainlinkPriceConsumer} from "./interfaces/IChainlinkPriceConsumer.sol";
import {Tiers} from "./Tiers.sol";
import {ReentrancyGuard} from "../lib/openzeppelin-contracts/contracts/security/ReentrancyGuard.sol";
import {SD59x18, sd, unwrap, ln, gt, frac} from "../lib/prb-math/src/SD59x18.sol";
import {UnrenounceableOwnable2Step} from "../lib/uranium-token/src/UnrenounceableOwnable2Step.sol";
import {Pausable} from "../lib/uranium-token/src/Pausable.sol";
// import {Pausable}
// import {Un}
contract PurchasingCenter is
UnrenounceableOwnable2Step,
Pausable,
Tiers,
ReentrancyGuard
{
IChainlinkPriceConsumer eth_pricer;
address public eth_usd_consumer_address;
// Just for reading.
mapping(Tier => TierDetails) public tier_to_tierDetails;
// The following mappings are concerned with accounting.
/** @dev tier_to_amountSold shows how much a tier is sold, and for determining oversubscription. */
mapping(Tier => uint256) public tier_to_amountSold;
/** @dev address_to_tier_to_contribution shows how much eth a user has contributed to a tier. */
mapping(address => mapping(Tier => uint256))
public address_to_tier_to_contribution;
/** @dev tier_to_totalContribution shows how much eth in total has been contributed to a tier. */
mapping(Tier => uint256) public tier_to_totalContribution;
/** @dev address_to_tier_to_pwc shows the pwc - price weighted contribution - of an address.
* The pwc is used to calculate the average price of eth.
*/
mapping(address => mapping(Tier => uint256)) public address_to_tier_to_pwc;
/** @dev tier_to_tierPwc shows the pwc aggregated across an entire tier.
*/
mapping(Tier => uint256) public tier_to_tierPwc;
/** @dev tier_oversubscribed tells whether a tier is oversubscribed
* A tier is marked oversubscribed when the amountSold of a tier is higher than its purchaseCap.
* The mapping gives a cleaner and less gas intensive way to determine whether a tier is oversubscribed.
*/
mapping(Tier => bool) public tier_oversubscribed;
/** @dev address_to_tier_to_boughtAlready is used to mark if someone has already bought.
* If he has already bought, when he buys again, he will not be added to the address[] arrays that follow.
*/
mapping(address => mapping(Tier => bool))
public address_to_tier_to_boughtAlready;
address[] public tier1_buyers;
address[] public tier2_buyers;
address[] public tier3_buyers;
address[] public tier4_buyers;
uint256 public startTime;
uint256 public purchaseWindow;
uint256 public commodityPrice;
/** @dev sd59x18_decimals is used to pad the int256 numbers so that they will be integers.
* For instance, sd(int256(1)) would actually correspond to 0.000000000000000001.
* Whereas sd(int256(1) * sd59x18_decimals) would correspond to 1.
* Always multiply int256(x) with sd59x18_decimals before wrapping them into SD59x18 with sd(),
* and always divide a unwrapped SD59x18 with sd59x18_decimals before converting to uint256.
*/
int256 public immutable sd59x18_decimals = 1e18;
bool public started;
event PurchaseStarted(uint256 startTime);
event NewPurchaseWindowSet(uint256 newPurchaseWindow);
event NewCommodityPriceSet(uint256 newPrice);
event NewEthUsdConsumerAddressSet(address newEthUsdConsumerAddress);
event NewTierDetailsSet(
uint256 newTier,
uint256 newSellAmount,
uint256 newDiscount,
uint256 newLockupTime,
uint256 newPurchaseCap
);
event TierContributionUpdated(uint256 tier, uint256 newContribution);
event PwcUpdated(uint256 tier, uint256 pwc);
event Oversubscribed(uint256 tier, address guyWhoPushedItOver);
event BoughtTokens(uint256 tier, address guy, uint256 eth_in);
event EthWithdrawn(address to, uint256 balance);
event Log(string func, uint gas);
// @notice for the sale to commence you need the following initialized
// 1. commodity_price
// 2. the eth_usd_consumer_address
// 3. the purchaseWindow
// 4. the tiers
// @param _commodityPrice you need to enter it with the right decimals
constructor(
uint256 _purchaseWindow,
uint256 _commodityPrice,
address _eth_usd_consumer_address
) {
started = false;
// default values
purchaseWindow = _purchaseWindow;
commodityPrice = _commodityPrice;
eth_usd_consumer_address = _eth_usd_consumer_address;
eth_pricer = IChainlinkPriceConsumer(_eth_usd_consumer_address);
tier_to_tierDetails[Tier.tier1] = TierDetails( // Initialize tiers
87500 * 1e18, // 1e18 being the number of decimals of tokens. Not to be confused with sd59x18_decimals
0,
2 weeks,
100 ether
);
tier_to_tierDetails[Tier.tier2] = TierDetails(
75000 * 1e18,
10,
4 weeks, // 1 month
100 ether
);
tier_to_tierDetails[Tier.tier3] = TierDetails(
50000 * 1e18,
20,
12 weeks, // 3 months
75 ether
);
tier_to_tierDetails[Tier.tier4] = TierDetails(
37500 * 1e18,
30,
24 weeks, // 6 months
50 ether
);
}
modifier everythingSet() {
require(purchaseWindow != 0, "purchaseWindow not set!");
require(commodityPrice != 0, "commodityPrice not set!");
require(
eth_usd_consumer_address != address(0),
"eth_usd_consumer_address not set!"
);
_;
}
modifier whenNotStarted() {
require(started == false, "Started already!");
_;
}
modifier whenStarted() {
require(started == true, "Not started yet!");
_;
}
function startPurchase() public onlyOwner whenNotStarted everythingSet {
// once started it's impossible unstart / pause.
startTime = block.timestamp;
started = true;
emit PurchaseStarted(startTime);
}
/**
* ╭────────────────────────────────────────────────────────────────╮
* │ * * * Functions to configure the params of the sale. * * * │
* ╰────────────────────────────────────────────────────────────────╯
*/
/** @dev Function to (re)set the purchaseWindow.
* 1 = 1 sec.
*/
function setPurchaseWindow(
uint256 _purchaseWindow
) external onlyOwner whenNotStarted {
purchaseWindow = _purchaseWindow;
emit NewPurchaseWindowSet(purchaseWindow);
}
/** @dev Function to (re)set the commodityPrice.
* Once the sale has started you cannot change the commodity price.
* commodityPrice must be set with 8 decimals, which is the amount of decimals
* For the price of eth returned by the Chainlink:
* ETH/USD Price Feed https://etherscan.io/address/0x5f4ec3df9cbd43714fe2740f5e3616155c5b8419
*/
function setCommodityPrice(
uint256 price
) external onlyOwner whenNotStarted {
commodityPrice = price;
emit NewCommodityPriceSet(price);
}
/** @dev Function to (re)set EthUsdConsumerAddress.
*/
function setEthUsdConsumerAddress(
address _eth_usd_consumer_address
) external onlyOwner whenPaused {
require(
_eth_usd_consumer_address != address(0),
"Address cannot be zero"
);
eth_usd_consumer_address = _eth_usd_consumer_address;
eth_pricer = IChainlinkPriceConsumer(_eth_usd_consumer_address);
emit NewEthUsdConsumerAddressSet(_eth_usd_consumer_address);
}
/** @dev Once the sale has started you cannot change the details of the tiers.
*/
function setTierDetails(
uint256 tier,
uint256 sellAmount,
uint256 discount,
uint256 lockupTime,
uint256 purchaseCap
) external onlyOwner whenNotStarted {
Tier _tier = _t(tier);
require(sellAmount >= 0, "Invalid sellAmount");
require(discount >= 0 && discount <= 100, "Invalid discount");
require(lockupTime >= 0, "Invalid lockupTime");
require(purchaseCap >= 0, "Invalid purchaseCap");
tier_to_tierDetails[_tier] = TierDetails(
sellAmount,
discount,
lockupTime,
purchaseCap
);
emit NewTierDetailsSet(
tier,
sellAmount,
discount,
lockupTime,
purchaseCap
);
}
/**
* ╭────────────────────────────────────────────────╮
* │ * * * Purchase & accounting functions. * * * │
* ╰────────────────────────────────────────────────╯
*/
function ethPrice() public view returns (int256) {
int256 price = eth_pricer.getLatestData();
require(price != 0, "Stale price data");
return price;
}
/** @dev Used for internal calculations.
* Return value _discounted_price is to be unwrapped for public display.
*/
function _discountedPrice(Tier tier) internal view returns (SD59x18) {
uint256 d;
if (tier == Tier.tier1) {
d = tier_to_tierDetails[Tier.tier1].discount;
} else if (tier == Tier.tier2) {
d = tier_to_tierDetails[Tier.tier2].discount;
} else if (tier == Tier.tier3) {
d = tier_to_tierDetails[Tier.tier3].discount;
} else if (tier == Tier.tier4) {
d = tier_to_tierDetails[Tier.tier4].discount;
}
SD59x18 _commodity_price = sd(
(int256(commodityPrice) * sd59x18_decimals)
);
SD59x18 _discounted = sd(int256(100 - d) * sd59x18_decimals);
SD59x18 _discounted_price = (_commodity_price.mul(_discounted)).div(
sd(int256(100) * sd59x18_decimals)
);
return _discounted_price;
}
function discountedPrice(uint256 tier) public view returns (uint256) {
Tier _tier = _t(tier);
SD59x18 _discounted_price = _discountedPrice(_tier);
uint256 price = uint256(unwrap(_discounted_price) / sd59x18_decimals);
return price;
}
/** @dev This function simply returns how much commodity
* would have been bought by a certain amount of eth at a tier.
* It does not pay any attention whether a tier is oversubscribed.
*/
function _ethInCommodityOut(
Tier tier,
uint256 eth_in
) internal view returns (SD59x18) {
SD59x18 _eth_price = sd(ethPrice() * sd59x18_decimals);
SD59x18 _price = _discountedPrice(tier);
SD59x18 _commodity_per_eth = _eth_price.div(_price);
SD59x18 _eth_in = sd(int256(eth_in) * sd59x18_decimals);
SD59x18 _commodityOut = _eth_in.mul(_commodity_per_eth);
return _commodityOut;
}
function ethInCommodityOut(
uint256 tier,
uint256 eth_in
) public view returns (uint256) {
Tier _tier = _t(tier);
SD59x18 _commodityOut = _ethInCommodityOut(_tier, eth_in);
uint256 commodityOut = uint256(
unwrap(_commodityOut) / sd59x18_decimals
);
return commodityOut;
}
/** @dev Price weighted contribution - pwc - is basically the dollar amount of all the eth contributed,
* calculated with the price of eth at the moment of contribution.
* One will note that eth_price will return something like 200100000000,
* which corresponds to 2001 usd (i.e. with 8 decimals).
* The price returned by eth_price therefore corresponds to the price of 1 ether.
* This calculation therefore introduces a 10 ** 8 decimal shift.
* In downstream functions, when we record the pwc, we do not divide the pwc with 10 ** 8.
* This is because when pwc is used to calculate pro_rata amounts, that 10 ** 8 is cancelled out.
* We will therefore only remove the 10 ** 8 in the external view functions of pwc.
*/
function _price_weighted_contribution(
uint256 new_contribution,
uint256 eth_price
) internal pure returns (SD59x18) {
SD59x18 _new_contribution = sd(
int256(new_contribution) * sd59x18_decimals
);
SD59x18 _eth_price = sd(int256(eth_price) * sd59x18_decimals);
SD59x18 _pwc = _new_contribution.mul(_eth_price);
return _pwc;
}
/** @dev This function, calculates how much someone is to have if the sale was conducted in a pro-rata manner.
* Pro-rata in this context means the amount of commodities you will get is equal to
* the amount of tokens on sale in a tier proportionate to the dollar cost of your
* eth contribution (pwc) relative to the total eth contribution of that tier.
*/
function _pro_rata_amount(
address guy,
Tier tier
) internal view returns (SD59x18 _out) {
TierDetails memory details = tier_to_tierDetails[tier];
uint256 amountOnSale = details.amountOnSale;
SD59x18 _amountOnSale = sd(int256(amountOnSale) * sd59x18_decimals);
uint256 pwc = address_to_tier_to_pwc[guy][tier];
uint256 tier_pwc = tier_to_tierPwc[tier];
SD59x18 _pwc = sd(int256(pwc) * sd59x18_decimals);
SD59x18 _tier_pwc = sd(int256(tier_pwc) * sd59x18_decimals);
_out = _amountOnSale.mul(_pwc).div(_tier_pwc);
return _out;
}
/**
* @dev This function calculates the tokens owed given an amount of
* contribution, accounting for oversubscription.
* This is in contrast to the _ethInCommodityOut() function,
* which simply calculates the amount of commodity that
* an amount of eth would buy given an eth price.
* Note that there is no conspicuous consideration of whether a tier is oversubscribed or not
* in the form of "if" statements. The consideration is baked into the logic
* by the fact that whatever amount you're getting is the amountSold * relative contribution.
*/
function _amountToGet(
address guy,
Tier tier
) internal view returns (SD59x18 out) {
uint256 amountSold = tier_to_amountSold[tier];
if (amountSold == 0) {
return sd(int256(0));
}
uint256 tier_pwc = tier_to_tierPwc[tier];
if (tier_pwc == 0) {
return sd(int256(0));
}
SD59x18 _amountSold = sd(int256(amountSold) * sd59x18_decimals);
uint256 pwc = address_to_tier_to_pwc[guy][tier];
SD59x18 _pwc = sd(int256(pwc) * sd59x18_decimals);
SD59x18 _tier_pwc = sd(int256(tier_pwc) * sd59x18_decimals);
out = _amountSold.mul(_pwc).div(_tier_pwc);
return out;
}
function amountToGet(
address guy,
uint256 tier
) public view returns (uint256) {
Tier _tier = _t(tier);
SD59x18 _commodityYouGet = _amountToGet(guy, _tier);
uint256 commodityYouGet = uint256(
unwrap(_commodityYouGet) / sd59x18_decimals
);
return commodityYouGet;
}
/**
* ╭──────────────────────────────╮
* │ * * * Buy function * * * │
* ╰──────────────────────────────╯
*/
/** @dev Function for commodity purchases. */
function buyTokens(
uint256 tier
)
external
payable
whenStarted
whenNotPaused
nonReentrant
returns (bool success)
{
Tier _tier = _t(tier);
address guy = msg.sender;
uint256 eth_in = msg.value;
require(eth_in > 0, "Eth deposit cannot be 0");
uint256 purchaseCap = tier_to_tierDetails[_tier].purchaseCap;
uint256 eth_spent = address_to_tier_to_contribution[guy][_tier];
require(
eth_in + eth_spent <= purchaseCap,
"buyTokens(): over the purchaseCap!"
);
SD59x18 _commodityOut = _ethInCommodityOut(_tier, eth_in);
uint256 amountOut = uint256(unwrap(_commodityOut) / sd59x18_decimals);
uint256 amountSold = tier_to_amountSold[_tier];
uint256 amountOnSale = tier_to_tierDetails[_tier].amountOnSale;
require(
block.timestamp <= purchaseWindow + startTime,
"buyTokens(): sales over!"
);
// If tier is oversubscribed.
if (amountSold + amountOut >= amountOnSale) {
tier_to_amountSold[_tier] = amountOnSale; // set amountSold to tier limit.
tier_oversubscribed[_tier] = true; // set tier overscription to true.
emit Oversubscribed(tier, guy);
} else {
tier_to_amountSold[_tier] += amountOut; // add amountOut to amountSold.
}
address_to_tier_to_contribution[guy][_tier] += eth_in; // add new contribution to personal contribution account.
tier_to_totalContribution[_tier] += eth_in; // add new contribution to tier contribution account.
emit TierContributionUpdated(tier, eth_in);
uint256 pwc = uint256(
unwrap(_price_weighted_contribution(eth_in, uint256(ethPrice()))) /
sd59x18_decimals
); // Calculate the pwc of the new contribution.
address_to_tier_to_pwc[guy][_tier] += pwc; // add the new pwc of the new contribution to the personal pwc.
tier_to_tierPwc[_tier] += pwc; // add the new pwc of the new contribution to the tier pwc.
emit PwcUpdated(tier, pwc);
bool didBuy = _bought(guy, tier); // update the buy details.
emit BoughtTokens(tier, guy, eth_in);
return didBuy;
}
/** @dev This function marks whether someone has bought.
If someone has already bought in a particular tier, it returns true.
If not, it pushes its address into the relevant array.
This kind of data is used for retainable eth and refund calculations.
*/
function _bought(address guy, uint256 tier) internal returns (bool didBuy) {
Tier _tier = _t(tier);
bool _bought_already = address_to_tier_to_boughtAlready[guy][_tier];
if (_bought_already) {
return true;
} else {
if (tier == 1) {
tier1_buyers.push(guy);
} else if (tier == 2) {
tier2_buyers.push(guy);
} else if (tier == 3) {
tier3_buyers.push(guy);
} else if (tier == 4) {
tier4_buyers.push(guy);
} else {
revert("Not valid tier");
}
address_to_tier_to_boughtAlready[guy][_tier] = true; // Mark guy as bought
}
return true; // Return true to indicate that guy has bought
}
/**
* ╭─────────────────────────────────────────╮
* │ Eth payable & refund accounting logic │
* ╰─────────────────────────────────────────╯
*/
/** @dev This function calculates how much a person is to pay. It takes account of
* whether a tier is oversubscribed.
* If a tier is oversubscribed, then the payable amout is the amount he will get,
* multiplied by the commodity price of that tier, divided by the average price
* of eth of his contributions. The average price of his eth contribution is the
* dollar cost of his eth contributions (pwc) divided his eth contributions.
* If a tier is not oversubscribed, then he simply pays what he contributed.
*/
function _ethPayable(
address guy,
Tier tier
) internal view returns (SD59x18) {
SD59x18 _payableAmount;
if (tier_oversubscribed[tier]) {
uint256 contribution = address_to_tier_to_contribution[guy][tier];
if (contribution == 0) {
return sd(int256(0));
}
SD59x18 _commodityYouGet = _amountToGet(guy, tier);
SD59x18 _price = _discountedPrice(tier);
uint256 pwc = address_to_tier_to_pwc[guy][tier];
SD59x18 _pwc = sd(int256(pwc) * sd59x18_decimals);
SD59x18 _contribution = sd(int256(contribution) * sd59x18_decimals);
_payableAmount = _commodityYouGet.mul(_price).div(
_pwc.div(_contribution)
);
} else {
uint256 payableAmount = address_to_tier_to_contribution[guy][tier];
_payableAmount = sd(int256(payableAmount) * sd59x18_decimals);
}
return _payableAmount;
}
function ethPayable(
address guy,
uint256 tier
) public view returns (uint256) {
Tier _tier = _t(tier);
SD59x18 _payableAmount = _ethPayable(guy, _tier);
uint256 payableAmount = uint256(
unwrap(_payableAmount) / sd59x18_decimals
);
return payableAmount;
}
/** @dev This function calculates how much a guy is entitled to be refunded.
* This contract will be read by the claimingCenter for refund dispersements.
* The refund amount is basically the difference between one's contribution
* and the ethPayable amount. Marked public because used in other functions in this contract.
*/
function refundAmount(
address guy,
uint256 tier
) public view returns (uint256) {
Tier _tier = _t(tier);
uint256 contribution = address_to_tier_to_contribution[guy][_tier];
uint256 payableAmount = ethPayable(guy, tier);
if (contribution == 0) {
return 0;
} else if (contribution <= payableAmount) {
return 0;
} else {
uint256 amount_to_refund = contribution - payableAmount;
return amount_to_refund;
}
}
/** @dev This calculates how much eth is refundable for a given tier
* by lopping through its list of buyers and querying its refundAmount.
*/
function ethRefundable(uint256 tier) public view returns (uint256) {
uint256 totalRefund;
_t(tier);
uint256 _buyers = (tier == 1) ? tier1_buyers.length : (tier == 2)
? tier2_buyers.length
: (tier == 3)
? tier3_buyers.length
: (tier == 4)
? tier4_buyers.length
: 0;
require(_buyers != 0, "no buyers yet");
if (tier == 1) {
for (uint256 i = 0; i < _buyers; i++) {
address buyer = tier1_buyers[i];
uint256 refund = refundAmount(buyer, tier);
totalRefund += refund;
}
} else if (tier == 2) {
for (uint256 i = 0; i < _buyers; i++) {
address buyer = tier2_buyers[i];
uint256 refund = refundAmount(buyer, tier);
totalRefund += refund;
}
} else if (tier == 3) {
for (uint256 i = 0; i < _buyers; i++) {
address buyer = tier3_buyers[i];
uint256 refund = refundAmount(buyer, tier);
totalRefund += refund;
}
} else if (tier == 4) {
for (uint256 i = 0; i < _buyers; i++) {
address buyer = tier4_buyers[i];
uint256 refund = refundAmount(buyer, tier);
totalRefund += refund;
}
}
return totalRefund;
}
/** @dev This function calculates how much eth is a tier told so for
accumulatively. Marked external because only for exteranl views.
*/
function ethRetainable(uint256 tier) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 totalTierContribution = tier_to_totalContribution[_tier];
uint256 totalRefund = ethRefundable(tier);
uint256 retainable = totalTierContribution - totalRefund;
return retainable;
}
/**
* ╭──────────────────────────────────────────╮
* │ * * * Miscellaneous view functions * * * │
* ╰──────────────────────────────────────────╯
*/
function salesOver() public view returns (bool) {
if (!started) {
return false;
} else if (block.timestamp <= purchaseWindow + startTime) {
return false;
} else {
return true;
}
}
function getContributionByUserAndTier(
address guy,
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 contribution = address_to_tier_to_contribution[guy][_tier];
return contribution;
}
function getTokensBoughtByUserAndTier(
address guy,
uint256 tier
) external view returns (uint256) {
uint256 commodityYouGet = amountToGet(guy, tier);
return commodityYouGet;
}
function getOversubscribed(
uint256 tier
) external view returns (bool isOversubscribed) {
Tier _tier = _t(tier);
isOversubscribed = tier_oversubscribed[_tier];
return isOversubscribed;
}
function getAmountSoldByTier(uint256 tier) external view returns (uint256) {
Tier _tier = _t(tier);
return tier_to_amountSold[_tier];
}
function getRemainingAmountByTier(
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 amountSold = tier_to_amountSold[_tier];
TierDetails memory details = tier_to_tierDetails[_tier];
uint256 amountOnSale = details.amountOnSale;
uint256 remaining = amountOnSale - amountSold;
return remaining;
}
function getTierDetails(
uint256 tier
)
external
view
returns (
uint256 amountOnSale,
uint256 discount,
uint256 lockupTime,
uint256 purchaseCap
)
{
Tier _tier = _t(tier);
TierDetails memory details = tier_to_tierDetails[_tier];
return (
details.amountOnSale,
details.discount,
details.lockupTime,
details.purchaseCap
);
}
function totalContribution(address guy) external view returns (uint256) {
uint256 tier1_contribution = address_to_tier_to_contribution[guy][
Tier.tier1
];
uint256 tier2_contribution = address_to_tier_to_contribution[guy][
Tier.tier2
];
uint256 tier3_contribution = address_to_tier_to_contribution[guy][
Tier.tier3
];
uint256 tier4_contribution = address_to_tier_to_contribution[guy][
Tier.tier4
];
uint256 aggregateContribution = tier1_contribution +
tier2_contribution +
tier3_contribution +
tier4_contribution;
return aggregateContribution;
}
function getPwcByUserAndTier(
address guy,
uint256 tier
) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 pwc = address_to_tier_to_pwc[guy][_tier] / 10 ** 8;
return pwc;
}
function getTierPwc(uint256 tier) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 tierPwc = tier_to_tierPwc[_tier] / 10 ** 8;
return tierPwc;
}
/** @dev
* This function returns the total amount a person bought at a given time.
*/
function totalAmountBought(address guy) external view returns (uint256) {
uint256 tier1_amount = amountToGet(guy, 1);
uint256 tier2_amount = amountToGet(guy, 2);
uint256 tier3_amount = amountToGet(guy, 3);
uint256 tier4_amount = amountToGet(guy, 4);
uint256 amount = tier1_amount +
tier2_amount +
tier3_amount +
tier4_amount;
return amount;
}
function tierContribution(uint tier) external view returns (uint256) {
Tier _tier = _t(tier);
uint256 amount = tier_to_totalContribution[_tier];
return amount;
}
function everythingIsSet() external view returns (bool) {
return (commodityPrice != 0 &&
purchaseWindow != 0 &&
eth_usd_consumer_address != address(0));
}
function getBoughtAlreadyByUserAndTier(
address guy,
uint256 tier
) external view returns (bool) {
Tier _tier = _t(tier);
bool boughtAlready = address_to_tier_to_boughtAlready[guy][_tier];
return boughtAlready;
}
function buyers(
uint256 tier
) external view returns (address[] memory buyersArray) {
if (tier == 1) {
return tier1_buyers;
} else if (tier == 2) {
return tier2_buyers;
} else if (tier == 3) {
return tier3_buyers;
} else if (tier == 4) {
return tier4_buyers;
} else {
revert("Not valid tier");
}
}
/**
* ╭───────────────────────────────────────────────────╮
* │ * * * Eth deposit and withdrawal functions. * * * │
* ╰───────────────────────────────────────────────────╯
*/
function withdrawEth(
address to
) external nonReentrant onlyOwner returns (bool) {
uint256 balance = address(this).balance;
(bool success, ) = payable(to).call{value: balance}("");
require(success, "Eth not withdrawn!");
emit EthWithdrawn(to, balance);
return success;
}
// Helper function to check the balance of this contract
function ethBalance() public view returns (uint256 balance) {
balance = address(this).balance;
return balance;
}
// Fallback function must be declared as external.
fallback() external payable {
emit Log("receive", gasleft());
}
// Receive is a variant of fallback that is triggered when msg.data is empty.
receive() external payable {
emit Log("receive", gasleft());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == _ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
/*
██████╗ ██████╗ ██████╗ ███╗ ███╗ █████╗ ████████╗██╗ ██╗
██╔══██╗██╔══██╗██╔══██╗████╗ ████║██╔══██╗╚══██╔══╝██║ ██║
██████╔╝██████╔╝██████╔╝██╔████╔██║███████║ ██║ ███████║
██╔═══╝ ██╔══██╗██╔══██╗██║╚██╔╝██║██╔══██║ ██║ ██╔══██║
██║ ██║ ██║██████╔╝██║ ╚═╝ ██║██║ ██║ ██║ ██║ ██║
╚═╝ ╚═╝ ╚═╝╚═════╝ ╚═╝ ╚═╝╚═╝ ╚═╝ ╚═╝ ╚═╝ ╚═╝
███████╗██████╗ ███████╗ █████╗ ██╗ ██╗ ██╗ █████╗
██╔════╝██╔══██╗██╔════╝██╔══██╗╚██╗██╔╝███║██╔══██╗
███████╗██║ ██║███████╗╚██████║ ╚███╔╝ ╚██║╚█████╔╝
╚════██║██║ ██║╚════██║ ╚═══██║ ██╔██╗ ██║██╔══██╗
███████║██████╔╝███████║ █████╔╝██╔╝ ██╗ ██║╚█████╔╝
╚══════╝╚═════╝ ╚══════╝ ╚════╝ ╚═╝ ╚═╝ ╚═╝ ╚════╝
*/
import "./sd59x18/Casting.sol";
import "./sd59x18/Constants.sol";
import "./sd59x18/Conversions.sol";
import "./sd59x18/Errors.sol";
import "./sd59x18/Helpers.sol";
import "./sd59x18/Math.sol";
import "./sd59x18/ValueType.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
* 0 before setting it to a non-zero value.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/**
* @title Tiers
* @dev A contract defining tiers for a token sale, each with specific details.
* This contract defines an enum for different tiers and a struct to store details
* for each tier, including the amount on sale, discount, lockup time, and purchase cap.
*/
contract Tiers {
enum Tier {
tier1,
tier2,
tier3,
tier4
}
struct TierDetails {
uint256 amountOnSale; // Total amount of tokens available for sale in this tier
uint256 discount; // Discount percentage for this tier
uint256 lockupTime; // Lockup period in seconds for tokens bought in this tier
uint256 purchaseCap; // Maximum ETH that can be spent in this tier by a user
}
/**
* @notice Converts a numerical tier value to its corresponding enum value.
* @param tier The numerical value of the tier.
* @return The corresponding Tier enum value.
* @dev Use this function to convert a numerical tier value to its enum representation.
* Reverts if the provided tier value is not valid.
*/
function _t(uint256 tier) public pure returns (Tier) {
if (tier == 1) {
return Tier.tier1;
} else if (tier == 2) {
return Tier.tier2;
} else if (tier == 3) {
return Tier.tier3;
} else if (tier == 4) {
return Tier.tier4;
} else {
revert("Not valid tier");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import {Ownable2Step} from "../lib/openzeppelin-contracts/contracts/access/Ownable2Step.sol";
contract UnrenounceableOwnable2Step is Ownable2Step {
function renounceOwnership() public view override onlyOwner {
revert("UnrenounceableOwnable2Step: renounceOwnership is disabled");
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;
import "./Casting.sol" as Casting;
/// @notice The unsigned 2.18-decimal fixed-point number representation, which can have up to 2 digits and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the underlying Solidity
/// type uint64. This is useful when end users want to use uint64 to save gas, e.g. with tight variable packing in contract
/// storage.
type UD2x18 is uint64;
/*//////////////////////////////////////////////////////////////////////////
CASTING
//////////////////////////////////////////////////////////////////////////*/
using {
Casting.intoSD1x18,
Casting.intoSD59x18,
Casting.intoUD60x18,
Casting.intoUint256,
Casting.intoUint128,
Casting.intoUint40,
Casting.unwrap
} for UD2x18 global;
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
/// @solidity memory-safe-assembly
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}{
"compilationTarget": {
"src/ClaimingCenter.sol": "ClaimingCenter"
},
"evmVersion": "paris",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": [
":@prb-test/=lib/prb-test/src/",
":@prb/test/=lib/prb-math/lib/prb-test/src/",
":@uniswap/lib/=lib/uranium-token/lib/solidity-lib/",
":@uniswap/v2-core/=lib/uranium-token/lib/v2-core/",
":@uniswap/v2-periphery/=lib/pizza/lib/v2-periphery/contracts/",
":chainlink/=lib/chainlink/",
":ds-test/=lib/forge-std/lib/ds-test/src/",
":erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
":forge-std/=lib/forge-std/src/",
":openzeppelin-contracts/=lib/openzeppelin-contracts/",
":openzeppelin/=lib/openzeppelin-contracts/contracts/",
":pizza-oracles/=lib/pizza-oracles/src/",
":pizza/=lib/pizza/",
":prb-math/=lib/prb-math/src/",
":prb-test/=lib/prb-test/src/",
":pyth-sdk-solidity/=lib/pizza/lib/pyth-sdk-solidity/",
":solidity-lib/=lib/pizza/lib/solidity-lib/contracts/",
":uranium-oracles/=lib/uranium-oracles/src/",
":uranium-token/=lib/uranium-token/",
":v2-core/=lib/pizza/lib/v2-core/contracts/",
":v2-periphery/=lib/pizza/lib/v2-periphery/contracts/"
]
}[{"inputs":[{"internalType":"address","name":"_commodity","type":"address"},{"internalType":"address","name":"_purchasingCenter","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"time","type":"uint256"}],"name":"ClaimsStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tier","type":"uint256"},{"indexed":false,"internalType":"address","name":"guy","type":"address"},{"indexed":false,"internalType":"uint256","name":"claimAmount","type":"uint256"}],"name":"CommodityClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"CommodityDeposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"CommodityWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EntireEthBalanceWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EthReservesDeposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EthReservesWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"PauserChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tier","type":"uint256"},{"indexed":false,"internalType":"address","name":"guy","type":"address"},{"indexed":false,"internalType":"uint256","name":"refundAmount","type":"uint256"}],"name":"RefundsClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"time","type":"uint256"}],"name":"RefundsStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"_t","outputs":[{"internalType":"enum Tiers.Tier","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"enum Tiers.Tier","name":"","type":"uint8"}],"name":"address_to_tier_eth_to_refund_claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"enum Tiers.Tier","name":"","type":"uint8"}],"name":"address_to_tier_to_tokens_claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"claim","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"claimRefunds","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"claimable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"claimablesUnlocked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimsStarted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"commodity","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"commodityBalance","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"commodityReserves","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"depositCommodity","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"depositEthToReserves","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"ethBalance","outputs":[{"internalType":"uint256","name":"balance","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"guy","type":"address"},{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"getRefundClaimedByUserAndTier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"getTokensBoughtByUserAndTier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"getTokensClaimedByTier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"guy","type":"address"},{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"getTokensClaimedByUserAndTier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pauser","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"purchasingCenter","outputs":[{"internalType":"contract PurchasingCenter","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"guy","type":"address"},{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"refundClaimable","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"refundReserves","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"refundsStarted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startClaims","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startRefunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tier","type":"uint256"}],"name":"tierRefundsClaimable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"enum Tiers.Tier","name":"","type":"uint8"}],"name":"tier_to_refunds_claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"enum Tiers.Tier","name":"","type":"uint8"}],"name":"tier_to_tokens_claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_newPauser","type":"address"}],"name":"updatePauser","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawCommodity","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"withdrawEntireCommodityBalance","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"withdrawEntireEthBalance","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawEthReserves","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]