// File: @openzeppelin\contracts\math\SafeMath.sol

// SPDX-License-Identifier: SimPL-2.0

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\token\ERC20\IERC20.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: node_modules\@openzeppelin\contracts\GSN\Context.sol


pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin\contracts\access\Ownable.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: contracts\IStakingV2.sol

pragma solidity 0.6.12;

/**
 * @title Staking interface, as defined by EIP-900.
 * @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-900.md
 */
abstract contract IStakingV2 {
    event Staked(address indexed user, uint256 amount, uint256 total, address referrer);
    event Unstaked(address indexed user, uint256 amount, uint256 total, bytes data);

    function stake(uint256 amount, address referrer) external virtual;
    function stakeFor(address user, uint256 amount, address referrer) external virtual;
    function unstake(uint256 amount) external virtual;
    function totalStakedFor(address addr) public virtual view returns (uint256);
    function totalStaked() public virtual view returns (uint256);
    function token() external virtual view returns (address);

    /**
     * @return False. This application does not support staking history.
     */
    function supportsHistory() external pure returns (bool) {
        return false;
    }
}

// File: contracts\TokenPool.sol

pragma solidity 0.6.12;



/**
 * @title A simple holder of tokens.
 * This is a simple contract to hold tokens. It's useful in the case where a separate contract
 * needs to hold multiple distinct pools of the same token.
 */
contract TokenPool is Ownable {
    IERC20 public token;

    constructor(IERC20 _token) public {
        token = _token;
    }

    function balance() public view returns (uint256) {
        return token.balanceOf(address(this));
    }

    function transfer(address to, uint256 value) external onlyOwner returns (bool) {
        return token.transfer(to, value);
    }

    function rescueFunds(address tokenToRescue, address to, uint256 amount) external onlyOwner returns (bool) {
        require(address(token) != tokenToRescue, 'TokenPool: Cannot claim token held by the contract');

        return IERC20(tokenToRescue).transfer(to, amount);
    }
}

// File: contracts\IReferrerBook.sol

pragma solidity 0.6.12;

interface IReferrerBook {
    function affirmReferrer(address user, address referrer) external returns (bool);
    function getUserReferrer(address user) external view returns (address);
    function getUserTopNode(address user) external view returns (address);
    function getUserNormalNode(address user) external view returns (address);
}


// File: node_modules\@openzeppelin\contracts\token\ERC20\ERC20.sol


pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin\contracts\token\ERC20\ERC20Burnable.sol


pragma solidity >=0.6.0 <0.8.0;



/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// File: contracts\DelegateERC20.sol

pragma solidity 0.6.12;


abstract contract DelegateERC20 is ERC20Burnable {
    // @notice A record of each accounts delegate
    mapping(address => address) internal _delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping(address => mapping(uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping(address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH =
        keccak256('EIP712Domain(string name,uint256 chainId,address verifyingContract)');

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH =
        keccak256('Delegation(address delegatee,uint256 nonce,uint256 expiry)');

    /// @notice A record of states for signing / validating signatures
    mapping(address => uint256) public nonces;

    // support delegates mint
    function _mint(address account, uint256 amount) internal virtual override {
        super._mint(account, amount);

        // add delegates to the minter
        _moveDelegates(address(0), _delegates[account], amount);
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual override {
        super._transfer(sender, recipient, amount);
        _moveDelegates(_delegates[sender], _delegates[recipient], amount);
    }

    // support delegates burn
    function burn(uint256 amount) public virtual override {
        super.burn(amount);

        // del delegates to backhole
        _moveDelegates(_delegates[_msgSender()], address(0), amount);
    }

    function burnFrom(address account, uint256 amount) public virtual override {
        super.burnFrom(account, amount);

        // del delegates to the backhole
        _moveDelegates(_delegates[account], address(0), amount);
    }

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external {
        bytes32 domainSeparator =
            keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name())), getChainId(), address(this)));

        bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry));

        bytes32 digest = keccak256(abi.encodePacked('\x19\x01', domainSeparator, structHash));

        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), 'Governance::delegateBySig: invalid signature');
        require(nonce == nonces[signatory]++, 'Governance::delegateBySig: invalid nonce');
        require(now <= expiry, 'Governance::delegateBySig: signature expired');
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account) external view returns (uint256) {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint256 blockNumber) external view returns (uint256) {
        require(blockNumber < block.number, 'Governance::getPriorVotes: not yet determined');

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2;
            // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee) internal {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator);
        // balance of underlying balances (not scaled);
        _delegates[delegator] = delegatee;

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);

        emit DelegateChanged(delegator, currentDelegate, delegatee);
    }

    function _moveDelegates(
        address srcRep,
        address dstRep,
        uint256 amount
    ) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    ) internal {
        uint32 blockNumber = safe32(block.number, 'Governance::_writeCheckpoint: block number exceeds 32 bits');

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint256 n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal pure returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }

        return chainId;
    }

    /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
}

// File: contracts\DSAGovToken.sol

pragma solidity 0.6.12;



contract DSAGovToken is DelegateERC20, Ownable {
    constructor() public ERC20("DSBTC", "DSBTC") {}

    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }
}

// File: contracts\GovTokenPool.sol

pragma solidity 0.6.12;




interface IOracle {
    function getData() external returns (uint256, bool);
}

contract GovTokenPool is Ownable {
    using SafeMath for uint256;

    struct PoolInfo {
        uint256 allocPoint;
        uint256 lastRewardBlock;
        uint256 accTokenPerShare;
    }

    mapping(address => PoolInfo) public poolInfo;
    mapping(address => mapping(address => uint256)) public userDebt;

    DSAGovToken public token;
    IOracle public cpiOracle;
    IOracle public marketOracle;
    uint256 public totalAllocPoint;
    uint256 public startBlock;

    address public governance;

    uint256 public priceRate;

    uint256 constant BASE_CPI = 100 * 10**18;
    uint256 public constant BASE_REWARD_PER_BLOCK = 111 * 10**16;

    uint256 constant MAX_GAP_BLOCKS = 6500;
    uint256 constant BLOCKS_4YEARS = 2372500 * 4;

    uint256 constant ONE = 10**18;
    uint256 constant ZERO_PT_ONE = 10**17;

    uint256 constant PERFECT_RATE = 1 * ONE; //100%
    uint256 constant HIGH_RATE_D = 3 * ZERO_PT_ONE;
    uint256 constant HIGH_RATE = PERFECT_RATE + HIGH_RATE_D; //130%
    uint256 constant LOW_RATE_D = 9 * ZERO_PT_ONE;
    uint256 constant LOW_RATE = PERFECT_RATE - LOW_RATE_D; //10%

    constructor(
        DSAGovToken _token,
        IOracle _cpiOracle,
        IOracle _marketOracle,
        uint256 _startBlock
    ) public {
        token = _token;
        cpiOracle = _cpiOracle;
        marketOracle = _marketOracle;
        startBlock = _startBlock;

        governance = _msgSender();
    }

    modifier onlyGovernance() {
        require(governance == _msgSender(), "Only governance");
        _;
    }

    function balance() public view returns (uint256) {
        return token.balanceOf(address(this));
    }

    function syncRate() external {
        uint256 cpi;
        bool cpiValid;
        (cpi, cpiValid) = cpiOracle.getData();
        if (!cpiValid) {
            priceRate = 0;
            return;
        }

        uint256 rate;
        bool exRateValid;
        (rate, exRateValid) = marketOracle.getData();
        if (!exRateValid) {
            priceRate = 0;
            return;
        }
        uint256 targetRate = cpi.mul(10**18).div(BASE_CPI);

        priceRate = rate.mul(ONE).div(targetRate);
    }

    function addPool(address _addr, uint256 _allocPoint)
        external
        onlyGovernance()
    {
        uint256 lastRewardBlock =
            block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);

        require(poolInfo[_addr].lastRewardBlock == 0, "pool exists");

        poolInfo[_addr] = PoolInfo({
            allocPoint: _allocPoint,
            lastRewardBlock: lastRewardBlock,
            accTokenPerShare: 0
        });
    }

    function removePool(address _addr) external onlyGovernance() {
        delete poolInfo[_addr];
    }

    function setPool(address _addr, uint256 _allocPoint)
        external
        onlyGovernance()
    {
        require(poolInfo[_addr].lastRewardBlock != 0, "pool not exists");

        totalAllocPoint = totalAllocPoint.sub(poolInfo[_addr].allocPoint).add(
            _allocPoint
        );
        poolInfo[_addr].allocPoint = _allocPoint;
    }

    function transferGovernance(address _newAddr) external onlyGovernance() {
        require(_newAddr != address(0), "zero address");

        governance = _newAddr;
    }

    function calcRatedReward(
        uint256 _initReward,
        uint256 r
    ) internal pure returns (uint256) {

        uint256 f;

        if(r == PERFECT_RATE) {
            return _initReward;
        }
        
        if(r > PERFECT_RATE && r < HIGH_RATE) {
            f = HIGH_RATE.sub(r).mul(ONE).div(HIGH_RATE_D);
        } else if(r < PERFECT_RATE && r > LOW_RATE) {
            f = r.sub(LOW_RATE).mul(ONE).div(LOW_RATE_D);
        }

        return f.mul(f).div(ONE).mul(_initReward).div(ONE);
    }

    function _updatePool(PoolInfo storage pool, uint256 _lpSupply) private {
        if (block.number <= pool.lastRewardBlock) {
            return;
        }

        if (_lpSupply == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }

        if (priceRate == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }

        if (priceRate >= HIGH_RATE || priceRate <= LOW_RATE) {
            pool.lastRewardBlock = block.number;
            return;
        }

        uint256 blocks = block.number.sub(pool.lastRewardBlock);

        if (blocks > MAX_GAP_BLOCKS) {
            blocks = MAX_GAP_BLOCKS;
        }

        uint256 halveTimes = block.number.sub(startBlock).div(BLOCKS_4YEARS);

        uint256 perfectReward =
            blocks
                .mul(BASE_REWARD_PER_BLOCK)
                .mul(pool.allocPoint)
                .div(totalAllocPoint)
                .div(2**halveTimes);

        uint256 reward =
            calcRatedReward(perfectReward, priceRate);

        if (reward > 0) {
            token.mint(address(this), reward);
            pool.accTokenPerShare = pool.accTokenPerShare.add(
                reward.mul(1e12).div(_lpSupply)
            );
        }

        pool.lastRewardBlock = block.number;
    }

    function updatePool(uint256 _lpSupply) external {
        address poolAddr = _msgSender();
        PoolInfo storage pool = poolInfo[poolAddr];
        require(pool.lastRewardBlock != 0, 'Pool not exists');

        _updatePool(pool, _lpSupply);
    }

    function updateAndClaim(
        address _userAddr,
        uint256 _userAmount,
        uint256 _lpSupply
    ) external {
        address poolAddr = _msgSender();
        PoolInfo storage pool = poolInfo[poolAddr];
        require(pool.lastRewardBlock != 0, 'Pool not exists');

        _updatePool(pool, _lpSupply);

        uint256 toClaim =
            _userAmount.mul(pool.accTokenPerShare).div(1e12).sub(
                userDebt[poolAddr][_userAddr]
            );

        if(toClaim > 0) {
            require(token.transfer(_userAddr, toClaim), 'transfer dbtc error');
        } 
    }

    function updateDebt(address _userAddr, uint256 _userAmount) external {
        address poolAddr = _msgSender();
        PoolInfo memory pool = poolInfo[poolAddr];
        require(pool.lastRewardBlock != 0, 'Pool not exists');
        userDebt[poolAddr][_userAddr] = _userAmount.mul(pool.accTokenPerShare).div(1e12);
    }

    function pendingReward(
        address _poolAddr,
        uint256 _userAmount,
        address _userAddr
    ) external view returns (uint256) {
        PoolInfo memory pool = poolInfo[_poolAddr];
        return
            _userAmount.mul(pool.accTokenPerShare).div(1e12).sub(
                userDebt[_poolAddr][_userAddr]
            );
    }
}

// File: contracts\TokenGeyserV2.sol

pragma solidity 0.6.12;








contract TokenGeyserV2 is IStakingV2, Ownable {
    using SafeMath for uint256;

    event Staked(
        address indexed user,
        uint256 amount,
        uint256 total,
        address referrer
    );
    event Unstaked(
        address indexed user,
        uint256 amount,
        uint256 total
    );
    event TokensClaimed(address indexed user, uint256 amount);
    event TokensLocked(uint256 amount, uint256 durationSec, uint256 total);
    // amount: Unlocked tokens, total: Total locked tokens
    event TokensUnlocked(uint256 amount, uint256 total);

    TokenPool private _stakingPool;
    TokenPool private _unlockedPool;
    TokenPool private _lockedPool;
    GovTokenPool public govTokenPool;

    //
    // Time-bonus params
    //
    uint256 public constant BONUS_DECIMALS = 2;
    uint256 public startBonus = 0;
    uint256 public bonusPeriodSec = 0;

    //
    // Global accounting state
    //
    uint256 public totalLockedShares = 0;
    uint256 public totalStakingShares = 0;
    uint256 private _totalStakingShareSeconds = 0;
    uint256 private _lastAccountingTimestampSec = now;
    uint256 private _maxUnlockSchedules = 0;
    uint256 private _initialSharesPerToken = 0;

    address public referrerBook;

    //share percent below: user + referrer + topNode == 100% == 10000
    uint256 public constant USER_SHARE_PCT = 8000;
    uint256 public constant REF_SHARE_PCT = 1500;
    uint256 public constant NODE_SHARE_PCT = 500;

    //
    // User accounting state
    //
    // Represents a single stake for a user. A user may have multiple.
    struct Stake {
        uint256 stakingShares;
        uint256 timestampSec;
    }

    // Caches aggregated values from the User->Stake[] map to save computation.
    // If lastAccountingTimestampSec is 0, there's no entry for that user.
    struct UserTotals {
        uint256 stakingShares;
        uint256 stakingShareSeconds;
        uint256 lastAccountingTimestampSec;
    }

    // Aggregated staking values per user
    mapping(address => UserTotals) private _userTotals;

    // The collection of stakes for each user. Ordered by timestamp, earliest to latest.
    mapping(address => Stake[]) private _userStakes;

    //
    // Locked/Unlocked Accounting state
    //
    struct UnlockSchedule {
        uint256 initialLockedShares;
        uint256 unlockedShares;
        uint256 lastUnlockTimestampSec;
        uint256 endAtSec;
        uint256 durationSec;
    }

    UnlockSchedule[] public unlockSchedules;

    /**
     * @param stakingToken The token users deposit as stake.
     * @param distributionToken The token users receive as they unstake.
     * @param maxUnlockSchedules Max number of unlock stages, to guard against hitting gas limit.
     * @param startBonus_ Starting time bonus, BONUS_DECIMALS fixed point.
     *                    e.g. 25% means user gets 25% of max distribution tokens.
     * @param bonusPeriodSec_ Length of time for bonus to increase linearly to max.
     * @param initialSharesPerToken Number of shares to mint per staking token on first stake.
     */
    constructor(
        IERC20 stakingToken,
        IERC20 distributionToken,
        GovTokenPool _govTokenPool,
        uint256 maxUnlockSchedules,
        uint256 startBonus_,
        uint256 bonusPeriodSec_,
        uint256 initialSharesPerToken,
        address referrerBook_
    ) public {
        // The start bonus must be some fraction of the max. (i.e. <= 100%)
        require(
            startBonus_ <= 10**BONUS_DECIMALS,
            "TokenGeyser: start bonus too high"
        );
        // If no period is desired, instead set startBonus = 100%
        // and bonusPeriod to a small value like 1sec.
        require(bonusPeriodSec_ != 0, "TokenGeyser: bonus period is zero");
        require(
            initialSharesPerToken > 0,
            "TokenGeyser: initialSharesPerToken is zero"
        );
        require(
            referrerBook_ != address(0),
            "TokenGeyser: referrer book is zero"
        );

        require(
            address(_govTokenPool) != address(0),
            "TokenGeyser: govTokenPool is zero"
        );

        _stakingPool = new TokenPool(stakingToken);
        _unlockedPool = new TokenPool(distributionToken);
        _lockedPool = new TokenPool(distributionToken);
        govTokenPool = _govTokenPool;
        startBonus = startBonus_;
        bonusPeriodSec = bonusPeriodSec_;
        _maxUnlockSchedules = maxUnlockSchedules;
        _initialSharesPerToken = initialSharesPerToken;

        referrerBook = referrerBook_;
    }

    /**
     * @return The token users deposit as stake.
     */
    function getStakingToken() public view returns (IERC20) {
        return _stakingPool.token();
    }

    /**
     * @return The token users receive as they unstake.
     */
    function getDistributionToken() public view returns (IERC20) {
        assert(_unlockedPool.token() == _lockedPool.token());
        return _unlockedPool.token();
    }

    /**
     * @dev Transfers amount of deposit tokens from the user.
     * @param amount Number of deposit tokens to stake.
     * @param referrer User's Referrer
     */
    function stake(uint256 amount, address referrer) external override {
        _stakeFor(msg.sender, msg.sender, amount, referrer);
    }

    /**
     * @dev Transfers amount of deposit tokens from the caller on behalf of user.
     * @param user User address who gains credit for this stake operation.
     * @param amount Number of deposit tokens to stake.
     * @param referrer User's Referrer
     */
    function stakeFor(
        address user,
        uint256 amount,
        address referrer
    ) external override onlyOwner {
        _stakeFor(msg.sender, user, amount, referrer);
    }

    /**
     * @dev Private implementation of staking methods.
     * @param staker User address who deposits tokens to stake.
     * @param beneficiary User address who gains credit for this stake operation.
     * @param amount Number of deposit tokens to stake.
     */
    function _stakeFor(
        address staker,
        address beneficiary,
        uint256 amount,
        address referrer
    ) private {
        require(amount > 0, "TokenGeyser: stake amount is zero");
        require(
            beneficiary != address(0),
            "TokenGeyser: beneficiary is zero address"
        );
        require(
            totalStakingShares == 0 || totalStaked() > 0,
            "TokenGeyser: Invalid state. Staking shares exist, but no staking tokens do"
        );

        uint256 mintedStakingShares = (totalStakingShares > 0)
            ? totalStakingShares.mul(amount).div(totalStaked())
            : amount.mul(_initialSharesPerToken);
        require(
            mintedStakingShares > 0,
            "TokenGeyser: Stake amount is too small"
        );

        updateAccounting();

        govTokenPool.updateAndClaim(beneficiary, totalStakedFor(beneficiary), totalStaked());

        // 1. User Accounting
        UserTotals storage totals = _userTotals[beneficiary];
        totals.stakingShares = totals.stakingShares.add(mintedStakingShares);
        totals.lastAccountingTimestampSec = now;

        Stake memory newStake = Stake(mintedStakingShares, now);
        _userStakes[beneficiary].push(newStake);

        // 2. Global Accounting
        totalStakingShares = totalStakingShares.add(mintedStakingShares);
        // Already set in updateAccounting()
        // _lastAccountingTimestampSec = now;

        
        // interactions
        require(
            _stakingPool.token().transferFrom(
                staker,
                address(_stakingPool),
                amount
            ),
            "TokenGeyser: transfer into staking pool failed"
        );

        govTokenPool.updateDebt(beneficiary, totalStakedFor(beneficiary));

        if (referrer != address(0) && referrer != staker) {
            IReferrerBook(referrerBook).affirmReferrer(staker, referrer);
        }

        emit Staked(beneficiary, amount, totalStakedFor(beneficiary), referrer);
    }

    /**
     * @dev Unstakes a certain amount of previously deposited tokens. User also receives their
     * alotted number of distribution tokens.
     * @param amount Number of deposit tokens to unstake / withdraw.
     */
    function unstake(uint256 amount) external override{
        _unstake(amount);
    }

    /**
     * @param amount Number of deposit tokens to unstake / withdraw.
     * @return The total number of distribution tokens that would be rewarded.
     */
    function unstakeQuery(uint256 amount) public returns (uint256) {
        return _unstake(amount);
    }

    /**
     * @dev Unstakes a certain amount of previously deposited tokens. User also receives their
     * alotted number of distribution tokens.
     * @param amount Number of deposit tokens to unstake / withdraw.
     * @return The total number of distribution tokens rewarded.
     */
    function _unstake(uint256 amount) private returns (uint256) {
        updateAccounting();

        // checks
        require(amount > 0, "TokenGeyser: unstake amount is zero");
        require(
            totalStakedFor(msg.sender) >= amount,
            "TokenGeyser: unstake amount is greater than total user stakes"
        );
        uint256 stakingSharesToBurn = totalStakingShares.mul(amount).div(
            totalStaked()
        );
        require(
            stakingSharesToBurn > 0,
            "TokenGeyser: Unable to unstake amount this small"
        );

        govTokenPool.updateAndClaim(msg.sender, totalStakedFor(msg.sender), totalStaked());

        // 1. User Accounting
        UserTotals storage totals = _userTotals[msg.sender];
        Stake[] storage accountStakes = _userStakes[msg.sender];

        // Redeem from most recent stake and go backwards in time.
        uint256 stakingShareSecondsToBurn = 0;
        uint256 sharesLeftToBurn = stakingSharesToBurn;
        uint256 rewardAmount = 0;
        while (sharesLeftToBurn > 0) {
            Stake storage lastStake = accountStakes[accountStakes.length - 1];
            uint256 stakeTimeSec = now.sub(lastStake.timestampSec);
            uint256 newStakingShareSecondsToBurn = 0;
            if (lastStake.stakingShares <= sharesLeftToBurn) {
                // fully redeem a past stake
                newStakingShareSecondsToBurn = lastStake.stakingShares.mul(
                    stakeTimeSec
                );
                rewardAmount = computeNewReward(
                    rewardAmount,
                    newStakingShareSecondsToBurn,
                    stakeTimeSec
                );
                stakingShareSecondsToBurn = stakingShareSecondsToBurn.add(
                    newStakingShareSecondsToBurn
                );
                sharesLeftToBurn = sharesLeftToBurn.sub(
                    lastStake.stakingShares
                );
                accountStakes.pop();
            } else {
                // partially redeem a past stake
                newStakingShareSecondsToBurn = sharesLeftToBurn.mul(
                    stakeTimeSec
                );
                rewardAmount = computeNewReward(
                    rewardAmount,
                    newStakingShareSecondsToBurn,
                    stakeTimeSec
                );
                stakingShareSecondsToBurn = stakingShareSecondsToBurn.add(
                    newStakingShareSecondsToBurn
                );
                lastStake.stakingShares = lastStake.stakingShares.sub(
                    sharesLeftToBurn
                );
                sharesLeftToBurn = 0;
            }
        }
        totals.stakingShareSeconds = totals.stakingShareSeconds.sub(
            stakingShareSecondsToBurn
        );
        totals.stakingShares = totals.stakingShares.sub(stakingSharesToBurn);
        // Already set in updateAccounting
        // totals.lastAccountingTimestampSec = now;

        // 2. Global Accounting
        _totalStakingShareSeconds = _totalStakingShareSeconds.sub(
            stakingShareSecondsToBurn
        );
        totalStakingShares = totalStakingShares.sub(stakingSharesToBurn);
        // Already set in updateAccounting
        // _lastAccountingTimestampSec = now;
        // interactions
        require(
            _stakingPool.transfer(msg.sender, amount),
            "TokenGeyser: transfer out of staking pool failed"
        );

        govTokenPool.updateDebt(msg.sender, totalStakedFor(msg.sender));

        uint256 userRewardAmount = _rewardUserAndReferrers(
            msg.sender,
            rewardAmount
        );

        emit Unstaked(msg.sender, amount, totalStakedFor(msg.sender));
        emit TokensClaimed(msg.sender, rewardAmount);

        require(
            totalStakingShares == 0 || totalStaked() > 0,
            "TokenGeyser: Error unstaking. Staking shares exist, but no staking tokens do"
        );
        return userRewardAmount;
    }

    function _rewardUserAndReferrers(address user, uint256 rewardAmount)
        private
        returns (uint256)
    {
        //0. reward user
        uint256 userAmount = rewardAmount.mul(USER_SHARE_PCT).div(10000);
        require(
            _unlockedPool.transfer(user, userAmount),
            "TokenGeyser: transfer out of unlocked pool failed(user)"
        );

        IReferrerBook refBook = IReferrerBook(referrerBook);

        //1. reward referrer
        uint256 amount = rewardAmount.mul(REF_SHARE_PCT).div(10000);
        address referrer = refBook.getUserReferrer(user);
        if (amount > 0 && referrer != address(0)) {
            _unlockedPool.transfer(referrer, amount);
        }

        //2. reward top node
        amount = rewardAmount.mul(NODE_SHARE_PCT).div(10000);
        address topNode = refBook.getUserTopNode(user);
        if (amount > 0 && topNode != address(0)) {
            _unlockedPool.transfer(topNode, amount);
        }

        return userAmount;
    }

    /**
     * @dev Applies an additional time-bonus to a distribution amount. This is necessary to
     *      encourage long-term deposits instead of constant unstake/restakes.
     *      The bonus-multiplier is the result of a linear function that starts at startBonus and
     *      ends at 100% over bonusPeriodSec, then stays at 100% thereafter.
     * @param currentRewardTokens The current number of distribution tokens already alotted for this
     *                            unstake op. Any bonuses are already applied.
     * @param stakingShareSeconds The stakingShare-seconds that are being burned for new
     *                            distribution tokens.
     * @param stakeTimeSec Length of time for which the tokens were staked. Needed to calculate
     *                     the time-bonus.
     * @return Updated amount of distribution tokens to award, with any bonus included on the
     *         newly added tokens.
     */
    function computeNewReward(
        uint256 currentRewardTokens,
        uint256 stakingShareSeconds,
        uint256 stakeTimeSec
    ) private view returns (uint256) {
        uint256 newRewardTokens = totalUnlocked().mul(stakingShareSeconds).div(
            _totalStakingShareSeconds
        );

        if (stakeTimeSec >= bonusPeriodSec) {
            return currentRewardTokens.add(newRewardTokens);
        }

        uint256 oneHundredPct = 10**BONUS_DECIMALS;
        uint256 bonusedReward = startBonus
            .add(
            oneHundredPct.sub(startBonus).mul(stakeTimeSec).div(bonusPeriodSec)
        )
            .mul(newRewardTokens)
            .div(oneHundredPct);
        return currentRewardTokens.add(bonusedReward);
    }

    /**
     * @param addr The user to look up staking information for.
     * @return The number of staking tokens deposited for addr.
     */
    function totalStakedFor(address addr) public override view returns (uint256) {
        return
            totalStakingShares > 0
                ? totalStaked().mul(_userTotals[addr].stakingShares).div(
                    totalStakingShares
                )
                : 0;
    }

    /**
     * @return The total number of deposit tokens staked globally, by all users.
     */
    function totalStaked() public override view returns (uint256) {
        return _stakingPool.balance();
    }

    /**
     * @dev Note that this application has a staking token as well as a distribution token, which
     * may be different. This function is required by EIP-900.
     * @return The deposit token used for staking.
     */
    function token() external override view returns (address) {
        return address(getStakingToken());
    }

    /**
     * @dev A globally callable function to update the accounting state of the system.
     *      Global state and state for the caller are updated.
     * @return [0] balance of the locked pool
     * @return [1] balance of the unlocked pool
     * @return [2] caller's staking share seconds
     * @return [3] global staking share seconds
     * @return [4] Rewards caller has accumulated, optimistically assumes max time-bonus.
     * @return [5] block timestamp
     */
    function updateAccounting()
        public
        returns (
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        unlockTokens();

        // Global accounting
        uint256 newStakingShareSeconds = now
            .sub(_lastAccountingTimestampSec)
            .mul(totalStakingShares);
        _totalStakingShareSeconds = _totalStakingShareSeconds.add(
            newStakingShareSeconds
        );
        _lastAccountingTimestampSec = now;

        // User Accounting
        UserTotals storage totals = _userTotals[msg.sender];
        uint256 newUserStakingShareSeconds = now
            .sub(totals.lastAccountingTimestampSec)
            .mul(totals.stakingShares);
        totals.stakingShareSeconds = totals.stakingShareSeconds.add(
            newUserStakingShareSeconds
        );
        totals.lastAccountingTimestampSec = now;

        uint256 totalUserRewards = (_totalStakingShareSeconds > 0)
            ? totalUnlocked().mul(totals.stakingShareSeconds).div(
                _totalStakingShareSeconds
            )
            : 0;

        return (
            totalLocked(),
            totalUnlocked(),
            totals.stakingShareSeconds,
            _totalStakingShareSeconds,
            totalUserRewards,
            now
        );
    }

    /**
     * @return Total number of locked distribution tokens.
     */
    function totalLocked() public view returns (uint256) {
        return _lockedPool.balance();
    }

    /**
     * @return Total number of unlocked distribution tokens.
     */
    function totalUnlocked() public view returns (uint256) {
        return _unlockedPool.balance();
    }

    /**
     * @return Number of unlock schedules.
     */
    function unlockScheduleCount() public view returns (uint256) {
        return unlockSchedules.length;
    }

    /**
     * @dev This funcion allows the contract owner to add more locked distribution tokens, along
     *      with the associated "unlock schedule". These locked tokens immediately begin unlocking
     *      linearly over the duraction of durationSec timeframe.
     * @param amount Number of distribution tokens to lock. These are transferred from the caller.
     * @param durationSec Length of time to linear unlock the tokens.
     */
    function lockTokens(uint256 amount, uint256 durationSec)
        external
        onlyOwner
    {
        require(
            unlockSchedules.length < _maxUnlockSchedules,
            "TokenGeyser: reached maximum unlock schedules"
        );

        // Update lockedTokens amount before using it in computations after.
        updateAccounting();

        uint256 lockedTokens = totalLocked();
        uint256 mintedLockedShares = (lockedTokens > 0)
            ? totalLockedShares.mul(amount).div(lockedTokens)
            : amount.mul(_initialSharesPerToken);

        UnlockSchedule memory schedule;
        schedule.initialLockedShares = mintedLockedShares;
        schedule.lastUnlockTimestampSec = now;
        schedule.endAtSec = now.add(durationSec);
        schedule.durationSec = durationSec;
        unlockSchedules.push(schedule);

        totalLockedShares = totalLockedShares.add(mintedLockedShares);

        require(
            _lockedPool.token().transferFrom(
                msg.sender,
                address(_lockedPool),
                amount
            ),
            "TokenGeyser: transfer into locked pool failed"
        );
        emit TokensLocked(amount, durationSec, totalLocked());
    }

    /**
     * @dev Moves distribution tokens from the locked pool to the unlocked pool, according to the
     *      previously defined unlock schedules. Publicly callable.
     * @return Number of newly unlocked distribution tokens.
     */
    function unlockTokens() public returns (uint256) {
        uint256 unlockedTokens = 0;
        uint256 lockedTokens = totalLocked();

        if (totalLockedShares == 0) {
            unlockedTokens = lockedTokens;
        } else {
            uint256 unlockedShares = 0;
            for (uint256 s = 0; s < unlockSchedules.length; s++) {
                unlockedShares = unlockedShares.add(unlockScheduleShares(s));
            }
            unlockedTokens = unlockedShares.mul(lockedTokens).div(
                totalLockedShares
            );
            totalLockedShares = totalLockedShares.sub(unlockedShares);
        }

        if (unlockedTokens > 0) {
            require(
                _lockedPool.transfer(address(_unlockedPool), unlockedTokens),
                "TokenGeyser: transfer out of locked pool failed"
            );
            emit TokensUnlocked(unlockedTokens, totalLocked());
        }

        return unlockedTokens;
    }

    /**
     * @dev Returns the number of unlockable shares from a given schedule. The returned value
     *      depends on the time since the last unlock. This function updates schedule accounting,
     *      but does not actually transfer any tokens.
     * @param s Index of the unlock schedule.
     * @return The number of unlocked shares.
     */
    function unlockScheduleShares(uint256 s) private returns (uint256) {
        UnlockSchedule storage schedule = unlockSchedules[s];

        if (schedule.unlockedShares >= schedule.initialLockedShares) {
            return 0;
        }

        uint256 sharesToUnlock = 0;
        // Special case to handle any leftover dust from integer division
        if (now >= schedule.endAtSec) {
            sharesToUnlock = (
                schedule.initialLockedShares.sub(schedule.unlockedShares)
            );
            schedule.lastUnlockTimestampSec = schedule.endAtSec;
        } else {
            sharesToUnlock = now
                .sub(schedule.lastUnlockTimestampSec)
                .mul(schedule.initialLockedShares)
                .div(schedule.durationSec);
            schedule.lastUnlockTimestampSec = now;
        }

        schedule.unlockedShares = schedule.unlockedShares.add(sharesToUnlock);
        return sharesToUnlock;
    }

    /**
     * @dev Lets the owner rescue funds air-dropped to the staking pool.
     * @param tokenToRescue Address of the token to be rescued.
     * @param to Address to which the rescued funds are to be sent.
     * @param amount Amount of tokens to be rescued.
     * @return Transfer success.
     */
    function rescueFundsFromStakingPool(
        address tokenToRescue,
        address to,
        uint256 amount
    ) public onlyOwner returns (bool) {
        return _stakingPool.rescueFunds(tokenToRescue, to, amount);
    }

    function setReferrerBook(address referrerBook_) external onlyOwner {
        require(referrerBook_ != address(0), "referrerBook == 0");
        referrerBook = referrerBook_;
    }

    function claimGovToken() external {
        address beneficiary = msg.sender;
        govTokenPool.updateAndClaim(beneficiary,  totalStakedFor(beneficiary), totalStaked());
        govTokenPool.updateDebt(beneficiary,  totalStakedFor(beneficiary));
    }

    function pendingGovToken(address _user) external view returns(uint256) {
        return govTokenPool.pendingReward(address(this), totalStakedFor(_user), _user);
    }

    function updateGovTokenPool() external {
        govTokenPool.updatePool(totalStaked());
    }
}

{
  "compilationTarget": {
    "TokenGeyserV2.sol": "TokenGeyserV2"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}