// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, "\x19Ethereum Signed Message:\n32")
mstore(0x1c, hash)
message := keccak256(0x00, 0x3c)
}
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
/// @solidity memory-safe-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, "\x19\x01")
mstore(add(ptr, 0x02), domainSeparator)
mstore(add(ptr, 0x22), structHash)
data := keccak256(ptr, 0x42)
}
}
/**
* @dev Returns an Ethereum Signed Data with intended validator, created from a
* `validator` and `data` according to the version 0 of EIP-191.
*
* See {recover}.
*/
function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x00", validator, data));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)
pragma solidity ^0.8.8;
import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
* separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
* separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
*
* _Available since v3.4._
*
* @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
*/
abstract contract EIP712 is IERC5267 {
using ShortStrings for *;
bytes32 private constant _TYPE_HASH =
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _cachedDomainSeparator;
uint256 private immutable _cachedChainId;
address private immutable _cachedThis;
bytes32 private immutable _hashedName;
bytes32 private immutable _hashedVersion;
ShortString private immutable _name;
ShortString private immutable _version;
string private _nameFallback;
string private _versionFallback;
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
_name = name.toShortStringWithFallback(_nameFallback);
_version = version.toShortStringWithFallback(_versionFallback);
_hashedName = keccak256(bytes(name));
_hashedVersion = keccak256(bytes(version));
_cachedChainId = block.chainid;
_cachedDomainSeparator = _buildDomainSeparator();
_cachedThis = address(this);
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
return _cachedDomainSeparator;
} else {
return _buildDomainSeparator();
}
}
function _buildDomainSeparator() private view returns (bytes32) {
return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
/**
* @dev See {EIP-5267}.
*
* _Available since v4.9._
*/
function eip712Domain()
public
view
virtual
override
returns (
bytes1 fields,
string memory name,
string memory version,
uint256 chainId,
address verifyingContract,
bytes32 salt,
uint256[] memory extensions
)
{
return (
hex"0f", // 01111
_name.toStringWithFallback(_nameFallback),
_version.toStringWithFallback(_versionFallback),
block.chainid,
address(this),
bytes32(0),
new uint256[](0)
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(address from, address to, uint256 amount) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/ERC20Permit.sol)
pragma solidity ^0.8.0;
import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";
/**
* @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* _Available since v3.4._
*/
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// solhint-disable-next-line var-name-mixedcase
bytes32 private constant _PERMIT_TYPEHASH =
keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
/**
* @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
* However, to ensure consistency with the upgradeable transpiler, we will continue
* to reserve a slot.
* @custom:oz-renamed-from _PERMIT_TYPEHASH
*/
// solhint-disable-next-line var-name-mixedcase
bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;
/**
* @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
*
* It's a good idea to use the same `name` that is defined as the ERC20 token name.
*/
constructor(string memory name) EIP712(name, "1") {}
/**
* @inheritdoc IERC20Permit
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
bytes32 hash = _hashTypedDataV4(structHash);
address signer = ECDSA.recover(hash, v, r, s);
require(signer == owner, "ERC20Permit: invalid signature");
_approve(owner, spender, value);
}
/**
* @inheritdoc IERC20Permit
*/
function nonces(address owner) public view virtual override returns (uint256) {
return _nonces[owner].current();
}
/**
* @inheritdoc IERC20Permit
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view override returns (bytes32) {
return _domainSeparatorV4();
}
/**
* @dev "Consume a nonce": return the current value and increment.
*
* _Available since v4.1._
*/
function _useNonce(address owner) internal virtual returns (uint256 current) {
Counters.Counter storage nonce = _nonces[owner];
current = nonce.current();
nonce.increment();
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import { MessagingFee } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";
/// @notice Stores the information related to a batch of credit transfers.
struct TargetCreditBatch {
uint16 assetId;
TargetCredit[] credits;
}
/// @notice Stores the information related to a single credit transfer.
struct TargetCredit {
uint32 srcEid;
uint64 amount; // the amount of credits to intended to send
uint64 minAmount; // the minimum amount of credits to keep on local chain after sending
}
/// @title Credit Messaging API
/// @dev This interface defines the API for quoting and sending credits to other chains.
interface ICreditMessaging {
/// @notice Sends credits to the destination endpoint.
/// @param _dstEid The destination LayerZero endpoint ID.
/// @param _creditBatches The credit batch payloads to send to the destination LayerZero endpoint ID.
function sendCredits(uint32 _dstEid, TargetCreditBatch[] calldata _creditBatches) external payable;
/// @notice Quotes the fee for sending credits to the destination endpoint.
/// @param _dstEid The destination LayerZero endpoint ID.
/// @param _creditBatches The credit batch payloads to send to the destination LayerZero endpoint ID.
/// @return fee The fee for sending the credits to the destination endpoint.
function quoteSendCredits(
uint32 _dstEid,
TargetCreditBatch[] calldata _creditBatches
) external view returns (MessagingFee memory fee);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import { TargetCredit } from "./ICreditMessaging.sol";
struct Credit {
uint32 srcEid;
uint64 amount;
}
/// @dev This is an internal interface, defining functions to handle messages/calls from the credit messaging contract.
interface ICreditMessagingHandler {
function sendCredits(uint32 _dstEid, TargetCredit[] calldata _credits) external returns (Credit[] memory);
function receiveCredits(uint32 _srcEid, Credit[] calldata _credits) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/// @title An interface for minting and burning ERC20s.
/// @dev Implemented by OFT contracts.
interface IERC20Minter {
/// @notice Mint tokens and transfer them to the given account.
/// @param _to The account to mint the tokens to
/// @param _amount How many tokens to mint
function mint(address _to, uint256 _amount) external;
/// @notice Burn tokens from a given account.
/// @param _from The account to burn tokens from
/// @param _amount How many tokens to burn
function burnFrom(address _from, uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)
pragma solidity ^0.8.0;
interface IERC5267 {
/**
* @dev MAY be emitted to signal that the domain could have changed.
*/
event EIP712DomainChanged();
/**
* @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
* signature.
*/
function eip712Domain()
external
view
returns (
bytes1 fields,
string memory name,
string memory version,
uint256 chainId,
address verifyingContract,
bytes32 salt,
uint256[] memory extensions
);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";
struct MessagingParams {
uint32 dstEid;
bytes32 receiver;
bytes message;
bytes options;
bool payInLzToken;
}
struct MessagingReceipt {
bytes32 guid;
uint64 nonce;
MessagingFee fee;
}
struct MessagingFee {
uint256 nativeFee;
uint256 lzTokenFee;
}
struct Origin {
uint32 srcEid;
bytes32 sender;
uint64 nonce;
}
enum ExecutionState {
NotExecutable,
Executable,
Executed
}
interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);
event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);
event PacketDelivered(Origin origin, address receiver);
event LzReceiveAlert(
address indexed receiver,
address indexed executor,
Origin origin,
bytes32 guid,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
event LzTokenSet(address token);
function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);
function send(
MessagingParams calldata _params,
address _refundAddress
) external payable returns (MessagingReceipt memory);
function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;
function verifiable(
Origin calldata _origin,
address _receiver,
address _receiveLib,
bytes32 _payloadHash
) external view returns (bool);
function executable(Origin calldata _origin, address _receiver) external view returns (ExecutionState);
function lzReceive(
Origin calldata _origin,
address _receiver,
bytes32 _guid,
bytes calldata _message,
bytes calldata _extraData
) external payable;
// oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;
function setLzToken(address _lzToken) external;
function lzToken() external view returns (address);
function nativeToken() external view returns (address);
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { Origin } from "./ILayerZeroEndpointV2.sol";
interface ILayerZeroReceiver {
function allowInitializePath(Origin calldata _origin) external view returns (bool);
// todo: move to OAppReceiver? it is just convention for executor. we may can change it in a new Receiver version
function nextNonce(uint32 _eid, bytes32 _sender) external view returns (uint64);
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
struct SetConfigParam {
uint32 eid;
uint32 configType;
bytes config;
}
interface IMessageLibManager {
struct Timeout {
address lib;
uint256 expiry;
}
event LibraryRegistered(address newLib);
event DefaultSendLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibrarySet(uint32 eid, address oldLib, address newLib);
event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
event SendLibrarySet(address sender, uint32 eid, address newLib);
event ReceiveLibrarySet(address receiver, uint32 eid, address oldLib, address newLib);
event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);
function registerLibrary(address _lib) external;
function isRegisteredLibrary(address _lib) external view returns (bool);
function getRegisteredLibraries() external view returns (address[] memory);
function setDefaultSendLibrary(uint32 _eid, address _newLib) external;
function defaultSendLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _timeout) external;
function defaultReceiveLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;
function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);
function isSupportedEid(uint32 _eid) external view returns (bool);
/// ------------------- OApp interfaces -------------------
function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;
function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);
function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);
function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);
function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _gracePeriod) external;
function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);
function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;
function getConfig(
address _oapp,
address _lib,
uint32 _eid,
uint32 _configType
) external view returns (bytes memory config);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingChannel {
event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
function eid() external view returns (uint32);
// this is an emergency function if a message cannot be verified for some reasons
// required to provide _nextNonce to avoid race condition
function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;
function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);
function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);
function inboundPayloadHash(
address _receiver,
uint32 _srcEid,
bytes32 _sender,
uint64 _nonce
) external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingComposer {
event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
event LzComposeAlert(
address indexed from,
address indexed to,
address indexed executor,
bytes32 guid,
uint16 index,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
function composeQueue(
address _from,
address _to,
bytes32 _guid,
uint16 _index
) external view returns (bytes32 messageHash);
function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;
function lzCompose(
address _from,
address _to,
bytes32 _guid,
uint16 _index,
bytes calldata _message,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingContext {
function isSendingMessage() external view returns (bool);
function getSendContext() external view returns (uint32 dstEid, address sender);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
/**
* @title IOAppCore
*/
interface IOAppCore {
// Custom error messages
error OnlyPeer(uint32 eid, bytes32 sender);
error NoPeer(uint32 eid);
error InvalidEndpointCall();
error InvalidDelegate();
// Event emitted when a peer (OApp) is set for a corresponding endpoint
event PeerSet(uint32 eid, bytes32 peer);
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*/
function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);
/**
* @notice Retrieves the LayerZero endpoint associated with the OApp.
* @return iEndpoint The LayerZero endpoint as an interface.
*/
function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);
/**
* @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
* @param _eid The endpoint ID.
* @return peer The peer address (OApp instance) associated with the corresponding endpoint.
*/
function peers(uint32 _eid) external view returns (bytes32 peer);
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*/
function setPeer(uint32 _eid, bytes32 _peer) external;
/**
* @notice Sets the delegate address for the OApp Core.
* @param _delegate The address of the delegate to be set.
*/
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroReceiver, Origin } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroReceiver.sol";
interface IOAppReceiver is ILayerZeroReceiver {
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement a separate composeMsg sender that is NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata _origin,
bytes calldata _message,
address _sender
) external view returns (bool isSender);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { MessagingReceipt, MessagingFee } from "../../oapp/OAppSender.sol";
/**
* @dev Struct representing token parameters for the OFT send() operation.
*/
struct SendParam {
uint32 dstEid; // Destination endpoint ID.
bytes32 to; // Recipient address.
uint256 amountLD; // Amount to send in local decimals.
uint256 minAmountLD; // Minimum amount to send in local decimals.
bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
bytes composeMsg; // The composed message for the send() operation.
bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}
/**
* @dev Struct representing OFT limit information.
* @dev These amounts can change dynamically and are up the the specific oft implementation.
*/
struct OFTLimit {
uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}
/**
* @dev Struct representing OFT receipt information.
*/
struct OFTReceipt {
uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
// @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}
/**
* @dev Struct representing OFT fee details.
* @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
*/
struct OFTFeeDetail {
int256 feeAmountLD; // Amount of the fee in local decimals.
string description; // Description of the fee.
}
/**
* @title IOFT
* @dev Interface for the OftChain (OFT) token.
* @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
* @dev This specific interface ID is '0x02e49c2c'.
*/
interface IOFT {
// Custom error messages
error InvalidLocalDecimals();
error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
// Events
event OFTSent(
bytes32 indexed guid, // GUID of the OFT message.
uint32 dstEid, // Destination Endpoint ID.
address indexed fromAddress, // Address of the sender on the src chain.
uint256 amountSentLD, // Amount of tokens sent in local decimals.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
event OFTReceived(
bytes32 indexed guid, // GUID of the OFT message.
uint32 srcEid, // Source Endpoint ID.
address indexed toAddress, // Address of the recipient on the dst chain.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
/**
* @notice Retrieves interfaceID and the version of the OFT.
* @return interfaceId The interface ID.
* @return version The version.
*
* @dev interfaceId: This specific interface ID is '0x02e49c2c'.
* @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
* @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
* ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
*/
function oftVersion() external view returns (bytes4 interfaceId, uint64 version);
/**
* @notice Retrieves the address of the token associated with the OFT.
* @return token The address of the ERC20 token implementation.
*/
function token() external view returns (address);
/**
* @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
* @return requiresApproval Needs approval of the underlying token implementation.
*
* @dev Allows things like wallet implementers to determine integration requirements,
* without understanding the underlying token implementation.
*/
function approvalRequired() external view returns (bool);
/**
* @notice Retrieves the shared decimals of the OFT.
* @return sharedDecimals The shared decimals of the OFT.
*/
function sharedDecimals() external view returns (uint8);
/**
* @notice Provides a quote for OFT-related operations.
* @param _sendParam The parameters for the send operation.
* @return limit The OFT limit information.
* @return oftFeeDetails The details of OFT fees.
* @return receipt The OFT receipt information.
*/
function quoteOFT(
SendParam calldata _sendParam
) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);
/**
* @notice Provides a quote for the send() operation.
* @param _sendParam The parameters for the send() operation.
* @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
* @return fee The calculated LayerZero messaging fee from the send() operation.
*
* @dev MessagingFee: LayerZero msg fee
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
*/
function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);
/**
* @notice Executes the send() operation.
* @param _sendParam The parameters for the send operation.
* @param _fee The fee information supplied by the caller.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess funds from fees etc. on the src.
* @return receipt The LayerZero messaging receipt from the send() operation.
* @return oftReceipt The OFT receipt information.
*
* @dev MessagingReceipt: LayerZero msg receipt
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function send(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
// Solidity does not support splitting import across multiple lines
// solhint-disable-next-line max-line-length
import { IOFT, SendParam, MessagingFee, MessagingReceipt, OFTReceipt } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";
/// @notice Stargate implementation type.
enum StargateType {
Pool,
OFT
}
/// @notice Ticket data for bus ride.
struct Ticket {
uint72 ticketId;
bytes passengerBytes;
}
/// @title Interface for Stargate.
/// @notice Defines an API for sending tokens to destination chains.
interface IStargate is IOFT {
/// @dev This function is same as `send` in OFT interface but returns the ticket data if in the bus ride mode,
/// which allows the caller to ride and drive the bus in the same transaction.
function sendToken(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt, Ticket memory ticket);
/// @notice Returns the Stargate implementation type.
function stargateType() external pure returns (StargateType);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/// @notice Parameters used to assess fees to send tokens to a destination endpoint.
struct FeeParams {
address sender;
uint32 dstEid;
uint64 amountInSD;
uint64 deficitSD;
bool toOFT;
bool isTaxi;
}
/// @title Interface for assessing fees to send tokens to a destination endpoint.
interface IStargateFeeLib {
/// @notice Apply a fee for a given request, allowing for state modification.
/// @dev This is included for future proofing potential implementations
/// @dev where state is modified in the feeLib based on a FeeParams
function applyFee(FeeParams calldata _params) external returns (uint64 amountOutSD);
/// @notice Apply a fee for a given request, without modifying state.
function applyFeeView(FeeParams calldata _params) external view returns (uint64 amountOutSD);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import { IStargate, SendParam, MessagingReceipt, MessagingFee, OFTReceipt } from "./IStargate.sol";
/// @title An interface for Stargate Pools
/// @notice Stargate Pools are a type of IStargate that allows users to pool token liquidity.
interface IStargatePool is IStargate {
/// @notice Deposit token into the pool
/// @param _receiver The account to mint the LP tokens to
/// @param _amountLD The amount of tokens to deposit in LD
/// @return amountLD The actual amount of tokens deposited in LD
function deposit(address _receiver, uint256 _amountLD) external payable returns (uint256 amountLD);
/// @notice Redeem an amount of LP tokens from the senders account, claiming rewards.
/// @param _amountLD The amount of LP tokens to redeem
/// @param _receiver The account to transfer the
function redeem(uint256 _amountLD, address _receiver) external returns (uint256 amountLD);
/// @notice Get how many LP tokens are redeemable for a given account
/// @param _owner The address of the account to check
/// @return amountLD The amount of LP tokens redeemable, in LD
function redeemable(address _owner) external view returns (uint256 amountLD);
/// @notice Redeem LP tokens and send the withdrawn tokens to a destination endpoint.
/// @param _sendParam The SendParam payload describing the redeem and send
/// @param _fee The MessagingFee to perform redeemSend
/// @param _refundAddress The address to refund excess LayerZero messaging fees.
/// @return receipt The MessagingReceipt describing the result of redeemSend
/// @return oftReceipt The OFTReceipt describing the result of redeemSend
function redeemSend(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory receipt, OFTReceipt memory oftReceipt);
/// @notice Quote the messaging fee for a redeemSend operation
/// @param _sendParam The SendParam payload describing the redeem and send
/// @param _payInLzToken Whether to pay the fee in LZ token
/// @return messagingFee The MessagingFee for the redeemSend operation
function quoteRedeemSend(
SendParam calldata _sendParam,
bool _payInLzToken
) external view returns (MessagingFee memory messagingFee);
/// @notice Get the Total Value Locked in the pool.
/// @return The total value locked
function tvl() external view returns (uint256);
/// @notice Get the available balance of the pool
function poolBalance() external view returns (uint256);
/// @notice Get the address of the LP token
/// @return The address of the LP token contract.
function lpToken() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import { MessagingReceipt, MessagingFee, Ticket } from "./IStargate.sol";
/// @notice Payload for sending a taxi message.
/// @dev A taxi message is sent immediately and is not stored on the bus.
struct TaxiParams {
address sender;
uint32 dstEid;
bytes32 receiver;
uint64 amountSD;
bytes composeMsg;
bytes extraOptions;
}
/// @notice Payload for riding the bus.
/// @dev Riding the bus is a two-step process:
/// @dev - The message is sent to the bus,
/// @dev - The bus is driven to the destination.
struct RideBusParams {
address sender;
uint32 dstEid;
bytes32 receiver;
uint64 amountSD;
bool nativeDrop;
}
/// @title Token Messaging API.
/// @notice This interface defines the API for sending a taxi message, riding the bus, and driving the bus, along with
/// corresponding quote functions.
interface ITokenMessaging {
/// @notice Sends a taxi message
/// @param _params The taxi message payload
/// @param _messagingFee The messaging fee for sending a taxi message
/// @param _refundAddress The address to refund excess LayerZero MessagingFees
/// @return receipt The MessagingReceipt resulting from sending the taxi
function taxi(
TaxiParams calldata _params,
MessagingFee calldata _messagingFee,
address _refundAddress
) external payable returns (MessagingReceipt memory receipt);
/// @notice Quotes the messaging fee for sending a taxi message
/// @param _params The taxi message payload
/// @param _payInLzToken Whether to pay the fee in LZ token
/// @return fee The MessagingFee for sending the taxi message
function quoteTaxi(TaxiParams calldata _params, bool _payInLzToken) external view returns (MessagingFee memory fee);
/// @notice Sends a message to ride the bus, queuing the passenger in preparation for the drive.
/// @notice The planner will later driveBus to the destination endpoint.
/// @param _params The rideBus message payload
/// @return receipt The MessagingReceipt resulting from sending the rideBus message
/// @return ticket The Ticket for riding the bus
function rideBus(
RideBusParams calldata _params
) external returns (MessagingReceipt memory receipt, Ticket memory ticket);
/// @notice Quotes the messaging fee for riding the bus
/// @param _dstEid The destination LayerZero endpoint ID.
/// @param _nativeDrop Whether to pay for a native drop on the destination.
/// @return fee The MessagingFee for riding the bus
function quoteRideBus(uint32 _dstEid, bool _nativeDrop) external view returns (MessagingFee memory fee);
/// @notice Drives the bus to the destination.
/// @param _dstEid The destination LayerZero endpoint ID.
/// @param _passengers The passengers to drive to the destination.
/// @return receipt The MessagingReceipt resulting from driving the bus
function driveBus(
uint32 _dstEid,
bytes calldata _passengers
) external payable returns (MessagingReceipt memory receipt);
/// @notice Quotes the messaging fee for driving the bus to the destination.
/// @param _dstEid The destination LayerZero endpoint ID.
/// @param _passengers The passengers to drive to the destination.
/// @return fee The MessagingFee for driving the bus
function quoteDriveBus(uint32 _dstEid, bytes calldata _passengers) external view returns (MessagingFee memory fee);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import { Origin } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/OApp.sol";
/// @dev This is an internal interface, defining the function to handle token message from the token messaging contract.
interface ITokenMessagingHandler {
function receiveTokenBus(
Origin calldata _origin,
bytes32 _guid,
uint8 _seatNumber,
address _receiver,
uint64 _amountSD
) external;
function receiveTokenTaxi(
Origin calldata _origin,
bytes32 _guid,
address _receiver,
uint64 _amountSD,
bytes calldata _composeMsg
) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { ERC20Permit, ERC20 } from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";
/// @title A contract representing an ERC20Permit used for representing liquidity pool ownership.
contract LPToken is ERC20Permit {
address public immutable stargate;
uint8 internal immutable tokenDecimals;
error LPToken_Unauthorized();
modifier onlyStargate() {
if (msg.sender != stargate) revert LPToken_Unauthorized();
_;
}
/**
* @notice Create a LP token to represent partial pool ownership.
* @dev The sender of the message is set to the Stargate role. This is because it is expected that each
* StargatePool will create its own LPToken.
* @param _name The name of the ERC20
* @param _symbol The symbol for the ERC20
* @param _decimals How many decimals does the ERC20 has
*/
constructor(string memory _name, string memory _symbol, uint8 _decimals) ERC20(_name, _symbol) ERC20Permit(_name) {
stargate = msg.sender;
tokenDecimals = _decimals;
}
/// @notice Mint new LP tokens and transfer them to an account.
/// @param _to The account to send the newly minted tokens to
/// @param _amount How many tokens to mint
function mint(address _to, uint256 _amount) external onlyStargate {
_mint(_to, _amount);
}
/// @notice Burn tokens currently owned by an account.
/// @param _from The account to burn the tokens from
/// @param _amount How many tokens to burn
function burnFrom(address _from, uint256 _amount) external onlyStargate {
_burn(_from, _amount);
}
/// @notice How many decimals are used by this token.
/// @return The amount of decimals
function decimals() public view override returns (uint8) {
return tokenDecimals;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.
// The surrounding unchecked block does not change this fact.
// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1, "Math: mulDiv overflow");
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
// @dev Import the 'MessagingFee' and 'MessagingReceipt' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppSender, MessagingFee, MessagingReceipt } from "./OAppSender.sol";
// @dev Import the 'Origin' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppReceiver, Origin } from "./OAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OApp
* @dev Abstract contract serving as the base for OApp implementation, combining OAppSender and OAppReceiver functionality.
*/
abstract contract OApp is OAppSender, OAppReceiver {
/**
* @dev Constructor to initialize the OApp with the provided endpoint and owner.
* @param _endpoint The address of the LOCAL LayerZero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(address _endpoint, address _delegate) OAppCore(_endpoint, _delegate) {}
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol implementation.
* @return receiverVersion The version of the OAppReceiver.sol implementation.
*/
function oAppVersion()
public
pure
virtual
override(OAppSender, OAppReceiver)
returns (uint64 senderVersion, uint64 receiverVersion)
{
return (SENDER_VERSION, RECEIVER_VERSION);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";
/**
* @title OAppCore
* @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
*/
abstract contract OAppCore is IOAppCore, Ownable {
// The LayerZero endpoint associated with the given OApp
ILayerZeroEndpointV2 public immutable endpoint;
// Mapping to store peers associated with corresponding endpoints
mapping(uint32 eid => bytes32 peer) public peers;
/**
* @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
* @param _endpoint The address of the LOCAL Layer Zero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*
* @dev The delegate typically should be set as the owner of the contract.
*/
constructor(address _endpoint, address _delegate) {
endpoint = ILayerZeroEndpointV2(_endpoint);
if (_delegate == address(0)) revert InvalidDelegate();
endpoint.setDelegate(_delegate);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
_setPeer(_eid, _peer);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
peers[_eid] = _peer;
emit PeerSet(_eid, _peer);
}
/**
* @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
* ie. the peer is set to bytes32(0).
* @param _eid The endpoint ID.
* @return peer The address of the peer associated with the specified endpoint.
*/
function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
bytes32 peer = peers[_eid];
if (peer == bytes32(0)) revert NoPeer(_eid);
return peer;
}
/**
* @notice Sets the delegate address for the OApp.
* @param _delegate The address of the delegate to be set.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
*/
function setDelegate(address _delegate) public onlyOwner {
endpoint.setDelegate(_delegate);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { IOAppReceiver, Origin } from "./interfaces/IOAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppReceiver
* @dev Abstract contract implementing the ILayerZeroReceiver interface and extending OAppCore for OApp receivers.
*/
abstract contract OAppReceiver is IOAppReceiver, OAppCore {
// Custom error message for when the caller is not the registered endpoint/
error OnlyEndpoint(address addr);
// @dev The version of the OAppReceiver implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant RECEIVER_VERSION = 2;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppSender version. Indicates that the OAppSender is not implemented.
* ie. this is a RECEIVE only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions.
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (0, RECEIVER_VERSION);
}
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @dev _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @dev _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement separate composeMsg senders that are NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata /*_origin*/,
bytes calldata /*_message*/,
address _sender
) public view virtual returns (bool) {
return _sender == address(this);
}
/**
* @notice Checks if the path initialization is allowed based on the provided origin.
* @param origin The origin information containing the source endpoint and sender address.
* @return Whether the path has been initialized.
*
* @dev This indicates to the endpoint that the OApp has enabled msgs for this particular path to be received.
* @dev This defaults to assuming if a peer has been set, its initialized.
* Can be overridden by the OApp if there is other logic to determine this.
*/
function allowInitializePath(Origin calldata origin) public view virtual returns (bool) {
return peers[origin.srcEid] == origin.sender;
}
/**
* @notice Retrieves the next nonce for a given source endpoint and sender address.
* @dev _srcEid The source endpoint ID.
* @dev _sender The sender address.
* @return nonce The next nonce.
*
* @dev The path nonce starts from 1. If 0 is returned it means that there is NO nonce ordered enforcement.
* @dev Is required by the off-chain executor to determine the OApp expects msg execution is ordered.
* @dev This is also enforced by the OApp.
* @dev By default this is NOT enabled. ie. nextNonce is hardcoded to return 0.
*/
function nextNonce(uint32 /*_srcEid*/, bytes32 /*_sender*/) public view virtual returns (uint64 nonce) {
return 0;
}
/**
* @dev Entry point for receiving messages or packets from the endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _guid The unique identifier for the received LayerZero message.
* @param _message The payload of the received message.
* @param _executor The address of the executor for the received message.
* @param _extraData Additional arbitrary data provided by the corresponding executor.
*
* @dev Entry point for receiving msg/packet from the LayerZero endpoint.
*/
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) public payable virtual {
// Ensures that only the endpoint can attempt to lzReceive() messages to this OApp.
if (address(endpoint) != msg.sender) revert OnlyEndpoint(msg.sender);
// Ensure that the sender matches the expected peer for the source endpoint.
if (_getPeerOrRevert(_origin.srcEid) != _origin.sender) revert OnlyPeer(_origin.srcEid, _origin.sender);
// Call the internal OApp implementation of lzReceive.
_lzReceive(_origin, _guid, _message, _executor, _extraData);
}
/**
* @dev Internal function to implement lzReceive logic without needing to copy the basic parameter validation.
*/
function _lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) internal virtual;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppSender
* @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
*/
abstract contract OAppSender is OAppCore {
using SafeERC20 for IERC20;
// Custom error messages
error NotEnoughNative(uint256 msgValue);
error LzTokenUnavailable();
// @dev The version of the OAppSender implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant SENDER_VERSION = 1;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
* ie. this is a SEND only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (SENDER_VERSION, 0);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
* @return fee The calculated MessagingFee for the message.
* - nativeFee: The native fee for the message.
* - lzTokenFee: The LZ token fee for the message.
*/
function _quote(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
bool _payInLzToken
) internal view virtual returns (MessagingFee memory fee) {
return
endpoint.quote(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
address(this)
);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _fee The calculated LayerZero fee for the message.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess fee values sent to the endpoint.
* @return receipt The receipt for the sent message.
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function _lzSend(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
MessagingFee memory _fee,
address _refundAddress
) internal virtual returns (MessagingReceipt memory receipt) {
// @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
uint256 messageValue = _payNative(_fee.nativeFee);
if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);
return
// solhint-disable-next-line check-send-result
endpoint.send{ value: messageValue }(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
_refundAddress
);
}
/**
* @dev Internal function to pay the native fee associated with the message.
* @param _nativeFee The native fee to be paid.
* @return nativeFee The amount of native currency paid.
*
* @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
* this will need to be overridden because msg.value would contain multiple lzFees.
* @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
* @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
* @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
*/
function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
return _nativeFee;
}
/**
* @dev Internal function to pay the LZ token fee associated with the message.
* @param _lzTokenFee The LZ token fee to be paid.
*
* @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
* @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
*/
function _payLzToken(uint256 _lzTokenFee) internal virtual {
// @dev Cannot cache the token because it is not immutable in the endpoint.
address lzToken = endpoint.lzToken();
if (lzToken == address(0)) revert LzTokenUnavailable();
// Pay LZ token fee by sending tokens to the endpoint.
IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
library OFTComposeMsgCodec {
// Offset constants for decoding composed messages
uint8 private constant NONCE_OFFSET = 8;
uint8 private constant SRC_EID_OFFSET = 12;
uint8 private constant AMOUNT_LD_OFFSET = 44;
uint8 private constant COMPOSE_FROM_OFFSET = 76;
/**
* @dev Encodes a OFT composed message.
* @param _nonce The nonce value.
* @param _srcEid The source endpoint ID.
* @param _amountLD The amount in local decimals.
* @param _composeMsg The composed message.
* @return _msg The encoded Composed message.
*/
function encode(
uint64 _nonce,
uint32 _srcEid,
uint256 _amountLD,
bytes memory _composeMsg // 0x[composeFrom][composeMsg]
) internal pure returns (bytes memory _msg) {
_msg = abi.encodePacked(_nonce, _srcEid, _amountLD, _composeMsg);
}
/**
* @dev Retrieves the nonce from the composed message.
* @param _msg The message.
* @return The nonce value.
*/
function nonce(bytes calldata _msg) internal pure returns (uint64) {
return uint64(bytes8(_msg[:NONCE_OFFSET]));
}
/**
* @dev Retrieves the source endpoint ID from the composed message.
* @param _msg The message.
* @return The source endpoint ID.
*/
function srcEid(bytes calldata _msg) internal pure returns (uint32) {
return uint32(bytes4(_msg[NONCE_OFFSET:SRC_EID_OFFSET]));
}
/**
* @dev Retrieves the amount in local decimals from the composed message.
* @param _msg The message.
* @return The amount in local decimals.
*/
function amountLD(bytes calldata _msg) internal pure returns (uint256) {
return uint256(bytes32(_msg[SRC_EID_OFFSET:AMOUNT_LD_OFFSET]));
}
/**
* @dev Retrieves the composeFrom value from the composed message.
* @param _msg The message.
* @return The composeFrom value.
*/
function composeFrom(bytes calldata _msg) internal pure returns (bytes32) {
return bytes32(_msg[AMOUNT_LD_OFFSET:COMPOSE_FROM_OFFSET]);
}
/**
* @dev Retrieves the composed message.
* @param _msg The message.
* @return The composed message.
*/
function composeMsg(bytes calldata _msg) internal pure returns (bytes memory) {
return _msg[COMPOSE_FROM_OFFSET:];
}
/**
* @dev Converts an address to bytes32.
* @param _addr The address to convert.
* @return The bytes32 representation of the address.
*/
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
/**
* @dev Converts bytes32 to an address.
* @param _b The bytes32 value to convert.
* @return The address representation of bytes32.
*/
function bytes32ToAddress(bytes32 _b) internal pure returns (address) {
return address(uint160(uint256(_b)));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
/// @dev The Path struct contains the bus base fare multiplier bps and the credit in the same slot for gas saving.
struct Path {
uint64 credit; // available credit for the path, in SD
}
using PathLib for Path global;
/**
* @title A library to operate on Paths.
* @dev A Path is a route through which value can be sent. It entails the local chain and a destination chain, and has
* a given amount of credit associated with it. Every time the value is sent from A to B, the credit on A is
* decreased and credit on B is increased. If credit hits 0 then the path can no longer be used.
*/
library PathLib {
uint64 internal constant UNLIMITED_CREDIT = type(uint64).max;
// solhint-disable-next-line event-name-camelcase
event Path_CreditBurned(uint64 amountSD);
error Path_InsufficientCredit();
error Path_AlreadyHasCredit();
error Path_UnlimitedCredit();
/// @notice Increase credit for a given Path.
/// @dev Reverts with Path_UnlimitedCredit if the increase would hit the maximum amount of credit (reserved value)
/// @param _path The Path for which to increase credit
/// @param _amountSD The amount by which to increase credit
function increaseCredit(Path storage _path, uint64 _amountSD) internal {
uint64 credit = _path.credit;
if (credit == UNLIMITED_CREDIT) return;
credit += _amountSD;
if (credit == UNLIMITED_CREDIT) revert Path_UnlimitedCredit();
_path.credit = credit;
}
/// @notice Decrease credit for a given Path.
/// @dev Reverts with InsufficientCredit if there is not enough credit
/// @param _path The Path for which to decrease credit
/// @param _amountSD The amount by which to decrease credit
function decreaseCredit(Path storage _path, uint64 _amountSD) internal {
uint64 currentCredit = _path.credit;
if (currentCredit == UNLIMITED_CREDIT) return;
if (currentCredit < _amountSD) revert Path_InsufficientCredit();
unchecked {
_path.credit = currentCredit - _amountSD;
}
}
/// @notice Decrease credit for a given path, even if only a partial amount is possible.
/// @param _path The Path for which to decrease credit
/// @param _amountSD The amount by which try to decrease credit
/// @param _minKept The minimum amount of credit to keep after the decrease
/// @return decreased The actual amount of credit decreased
function tryDecreaseCredit(
Path storage _path,
uint64 _amountSD,
uint64 _minKept
) internal returns (uint64 decreased) {
uint64 currentCredit = _path.credit;
// not allowed to try to decrease unlimited credit
if (currentCredit == UNLIMITED_CREDIT) revert Path_UnlimitedCredit();
if (_minKept < currentCredit) {
unchecked {
uint64 maxDecreased = currentCredit - _minKept;
decreased = _amountSD > maxDecreased ? maxDecreased : _amountSD;
_path.credit = currentCredit - decreased;
}
}
}
/// @notice Set a given path as OFT or reset an OFT path to 0 credit.
/// @dev A Path for which the asset is using an OFT on destination gets unlimited credit because value transfers
/// @dev do not spend value.
/// @dev Such a path is expected to not have credit before.
/// @dev Reverts with AlreadyHasCredit if the Path already had credit assigned to it
/// @param _path The Path to set
/// @param _oft Whether to set it as OFT or reset it from OFT
function setOFTPath(Path storage _path, bool _oft) internal {
uint64 currentCredit = _path.credit;
if (_oft) {
// only allow un-limiting from 0
if (currentCredit != 0) revert Path_AlreadyHasCredit();
_path.credit = UNLIMITED_CREDIT;
} else {
// only allow resetting from unlimited
if (currentCredit != UNLIMITED_CREDIT) revert Path_AlreadyHasCredit();
_path.credit = 0;
}
}
/// @notice Check whether a given Path is set as OFT.
/// @param _path The path to examine
/// @return whether the Path is set as OFT
function isOFTPath(Path storage _path) internal view returns (bool) {
return _path.credit == UNLIMITED_CREDIT;
}
/// @notice Burn credit for a given Path during bridged token migration.
function burnCredit(Path storage _path, uint64 _amountSD) internal {
decreaseCredit(_path, _amountSD);
emit Path_CreditBurned(_amountSD);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toUint248(uint256 value) internal pure returns (uint248) {
require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toUint240(uint256 value) internal pure returns (uint240) {
require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toUint232(uint256 value) internal pure returns (uint232) {
require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.2._
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toUint216(uint256 value) internal pure returns (uint216) {
require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toUint208(uint256 value) internal pure returns (uint208) {
require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toUint200(uint256 value) internal pure returns (uint200) {
require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toUint192(uint256 value) internal pure returns (uint192) {
require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toUint184(uint256 value) internal pure returns (uint184) {
require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toUint176(uint256 value) internal pure returns (uint176) {
require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toUint168(uint256 value) internal pure returns (uint168) {
require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toUint160(uint256 value) internal pure returns (uint160) {
require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toUint152(uint256 value) internal pure returns (uint152) {
require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toUint144(uint256 value) internal pure returns (uint144) {
require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toUint136(uint256 value) internal pure returns (uint136) {
require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v2.5._
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toUint120(uint256 value) internal pure returns (uint120) {
require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toUint112(uint256 value) internal pure returns (uint112) {
require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.2._
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toUint88(uint256 value) internal pure returns (uint88) {
require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toUint80(uint256 value) internal pure returns (uint80) {
require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toUint72(uint256 value) internal pure returns (uint72) {
require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v2.5._
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toUint56(uint256 value) internal pure returns (uint56) {
require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toUint48(uint256 value) internal pure returns (uint48) {
require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toUint40(uint256 value) internal pure returns (uint40) {
require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v2.5._
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toUint24(uint256 value) internal pure returns (uint24) {
require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v2.5._
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v2.5._
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*
* _Available since v3.0._
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toInt248(int256 value) internal pure returns (int248 downcasted) {
downcasted = int248(value);
require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toInt240(int256 value) internal pure returns (int240 downcasted) {
downcasted = int240(value);
require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toInt232(int256 value) internal pure returns (int232 downcasted) {
downcasted = int232(value);
require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.7._
*/
function toInt224(int256 value) internal pure returns (int224 downcasted) {
downcasted = int224(value);
require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toInt216(int256 value) internal pure returns (int216 downcasted) {
downcasted = int216(value);
require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toInt208(int256 value) internal pure returns (int208 downcasted) {
downcasted = int208(value);
require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toInt200(int256 value) internal pure returns (int200 downcasted) {
downcasted = int200(value);
require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toInt192(int256 value) internal pure returns (int192 downcasted) {
downcasted = int192(value);
require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toInt184(int256 value) internal pure returns (int184 downcasted) {
downcasted = int184(value);
require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toInt176(int256 value) internal pure returns (int176 downcasted) {
downcasted = int176(value);
require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toInt168(int256 value) internal pure returns (int168 downcasted) {
downcasted = int168(value);
require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toInt160(int256 value) internal pure returns (int160 downcasted) {
downcasted = int160(value);
require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toInt152(int256 value) internal pure returns (int152 downcasted) {
downcasted = int152(value);
require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toInt144(int256 value) internal pure returns (int144 downcasted) {
downcasted = int144(value);
require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toInt136(int256 value) internal pure returns (int136 downcasted) {
downcasted = int136(value);
require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128 downcasted) {
downcasted = int128(value);
require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toInt120(int256 value) internal pure returns (int120 downcasted) {
downcasted = int120(value);
require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toInt112(int256 value) internal pure returns (int112 downcasted) {
downcasted = int112(value);
require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toInt104(int256 value) internal pure returns (int104 downcasted) {
downcasted = int104(value);
require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.7._
*/
function toInt96(int256 value) internal pure returns (int96 downcasted) {
downcasted = int96(value);
require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toInt88(int256 value) internal pure returns (int88 downcasted) {
downcasted = int88(value);
require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toInt80(int256 value) internal pure returns (int80 downcasted) {
downcasted = int80(value);
require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toInt72(int256 value) internal pure returns (int72 downcasted) {
downcasted = int72(value);
require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64 downcasted) {
downcasted = int64(value);
require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toInt56(int256 value) internal pure returns (int56 downcasted) {
downcasted = int56(value);
require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toInt48(int256 value) internal pure returns (int48 downcasted) {
downcasted = int48(value);
require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toInt40(int256 value) internal pure returns (int40 downcasted) {
downcasted = int40(value);
require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32 downcasted) {
downcasted = int32(value);
require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toInt24(int256 value) internal pure returns (int24 downcasted) {
downcasted = int24(value);
require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16 downcasted) {
downcasted = int16(value);
require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8 downcasted) {
downcasted = int8(value);
require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*
* _Available since v3.0._
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)
pragma solidity ^0.8.8;
import "./StorageSlot.sol";
// | string | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA |
// | length | 0x BB |
type ShortString is bytes32;
/**
* @dev This library provides functions to convert short memory strings
* into a `ShortString` type that can be used as an immutable variable.
*
* Strings of arbitrary length can be optimized using this library if
* they are short enough (up to 31 bytes) by packing them with their
* length (1 byte) in a single EVM word (32 bytes). Additionally, a
* fallback mechanism can be used for every other case.
*
* Usage example:
*
* ```solidity
* contract Named {
* using ShortStrings for *;
*
* ShortString private immutable _name;
* string private _nameFallback;
*
* constructor(string memory contractName) {
* _name = contractName.toShortStringWithFallback(_nameFallback);
* }
*
* function name() external view returns (string memory) {
* return _name.toStringWithFallback(_nameFallback);
* }
* }
* ```
*/
library ShortStrings {
// Used as an identifier for strings longer than 31 bytes.
bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;
error StringTooLong(string str);
error InvalidShortString();
/**
* @dev Encode a string of at most 31 chars into a `ShortString`.
*
* This will trigger a `StringTooLong` error is the input string is too long.
*/
function toShortString(string memory str) internal pure returns (ShortString) {
bytes memory bstr = bytes(str);
if (bstr.length > 31) {
revert StringTooLong(str);
}
return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
}
/**
* @dev Decode a `ShortString` back to a "normal" string.
*/
function toString(ShortString sstr) internal pure returns (string memory) {
uint256 len = byteLength(sstr);
// using `new string(len)` would work locally but is not memory safe.
string memory str = new string(32);
/// @solidity memory-safe-assembly
assembly {
mstore(str, len)
mstore(add(str, 0x20), sstr)
}
return str;
}
/**
* @dev Return the length of a `ShortString`.
*/
function byteLength(ShortString sstr) internal pure returns (uint256) {
uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
if (result > 31) {
revert InvalidShortString();
}
return result;
}
/**
* @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
*/
function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
if (bytes(value).length < 32) {
return toShortString(value);
} else {
StorageSlot.getStringSlot(store).value = value;
return ShortString.wrap(_FALLBACK_SENTINEL);
}
}
/**
* @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
*/
function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
return toString(value);
} else {
return store;
}
}
/**
* @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
*
* WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
* actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
*/
function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
return byteLength(value);
} else {
return bytes(store).length;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard signed math utilities missing in the Solidity language.
*/
library SignedMath {
/**
* @dev Returns the largest of two signed numbers.
*/
function max(int256 a, int256 b) internal pure returns (int256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two signed numbers.
*/
function min(int256 a, int256 b) internal pure returns (int256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two signed numbers without overflow.
* The result is rounded towards zero.
*/
function average(int256 a, int256 b) internal pure returns (int256) {
// Formula from the book "Hacker's Delight"
int256 x = (a & b) + ((a ^ b) >> 1);
return x + (int256(uint256(x) >> 255) & (a ^ b));
}
/**
* @dev Returns the absolute unsigned value of a signed value.
*/
function abs(int256 n) internal pure returns (uint256) {
unchecked {
// must be unchecked in order to support `n = type(int256).min`
return uint256(n >= 0 ? n : -n);
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/interfaces/IOAppCore.sol";
import { Origin } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/OApp.sol";
// Solidity does not support splitting import across multiple lines
// solhint-disable-next-line max-line-length
import { OFTLimit, OFTFeeDetail, OFTReceipt, SendParam, MessagingReceipt, MessagingFee, IOFT } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";
import { OFTComposeMsgCodec } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/libs/OFTComposeMsgCodec.sol";
import { IStargate, Ticket } from "./interfaces/IStargate.sol";
import { IStargateFeeLib, FeeParams } from "./interfaces/IStargateFeeLib.sol";
import { ITokenMessaging, RideBusParams, TaxiParams } from "./interfaces/ITokenMessaging.sol";
import { ITokenMessagingHandler } from "./interfaces/ITokenMessagingHandler.sol";
import { ICreditMessagingHandler, Credit, TargetCredit } from "./interfaces/ICreditMessagingHandler.sol";
import { Path } from "./libs/Path.sol";
import { Transfer } from "./libs/Transfer.sol";
/// @title The base contract for StargateOFT, StargatePool, StargatePoolMigratable, and StargatePoolNative.
abstract contract StargateBase is Transfer, IStargate, ITokenMessagingHandler, ICreditMessagingHandler {
using SafeCast for uint256;
// Stargate status
uint8 internal constant NOT_ENTERED = 1;
uint8 internal constant ENTERED = 2;
uint8 internal constant PAUSED = 3;
/// @dev The token for the Pool or OFT.
/// @dev address(0) indicates native coin, such as ETH.
address public immutable override token;
/// @dev The shared decimals (lowest common decimals between chains).
uint8 public immutable override sharedDecimals;
/// @dev The rate between local decimals and shared decimals.
uint256 internal immutable convertRate;
/// @dev The local LayerZero EndpointV2.
ILayerZeroEndpointV2 public immutable endpoint;
/// @dev The local LayerZero endpoint ID
uint32 public immutable localEid;
address internal feeLib;
/// @dev The StargateBase status. Options include 1. NOT_ENTERED 2. ENTERED and 3. PAUSED.
uint8 public status = NOT_ENTERED;
/// @dev The treasury accrued fees, stored in SD.
uint64 public treasuryFee;
address internal creditMessaging;
address internal lzToken;
address internal planner;
address internal tokenMessaging;
address internal treasurer;
/// @dev Mapping of paths from this chain to other chains identified by their endpoint ID.
mapping(uint32 eid => Path path) public paths;
/// @dev A store for tokens that could not be delivered because _outflow() failed.
/// @dev retryReceiveToken() can be called to retry the receive.
mapping(bytes32 guid => mapping(uint8 index => bytes32 hash)) public unreceivedTokens;
modifier onlyCaller(address _caller) {
if (msg.sender != _caller) revert Stargate_Unauthorized();
_;
}
modifier nonReentrantAndNotPaused() {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
if (status != NOT_ENTERED) {
if (status == ENTERED) revert Stargate_ReentrantCall();
revert Stargate_Paused();
}
// Any calls to nonReentrant after this point will fail
status = ENTERED;
_;
status = NOT_ENTERED;
}
error Stargate_ReentrantCall();
error Stargate_InvalidTokenDecimals();
error Stargate_Unauthorized();
error Stargate_SlippageTooHigh();
error Stargate_UnreceivedTokenNotFound();
error Stargate_OutflowFailed();
error Stargate_InvalidAmount();
error Stargate_InsufficientFare();
error Stargate_InvalidPath();
error Stargate_LzTokenUnavailable();
error Stargate_Paused();
error Stargate_RecoverTokenUnsupported();
event AddressConfigSet(AddressConfig config);
event CreditsSent(uint32 dstEid, Credit[] credits);
event CreditsReceived(uint32 srcEid, Credit[] credits);
event UnreceivedTokenCached(
bytes32 guid,
uint8 index,
uint32 srcEid,
address receiver,
uint256 amountLD,
bytes composeMsg
);
event OFTPathSet(uint32 dstEid, bool oft);
event PauseSet(bool paused);
event PlannerFeeWithdrawn(uint256 amount);
event TreasuryFeeAdded(uint64 amountSD);
event TreasuryFeeWithdrawn(address to, uint64 amountSD);
struct AddressConfig {
address feeLib;
address planner;
address treasurer;
address tokenMessaging;
address creditMessaging;
address lzToken;
}
/// @notice Create a new Stargate contract
/// @dev Reverts with InvalidTokenDecimals if the token decimals are smaller than the shared decimals.
/// @param _token The token for the pool or oft. If the token is address(0), it is the native coin
/// @param _tokenDecimals The number of decimals for this tokens implementation on this chain
/// @param _sharedDecimals The number of decimals shared between all implementations of the OFT
/// @param _endpoint The LZ endpoint contract
/// @param _owner The owner of this contract
constructor(address _token, uint8 _tokenDecimals, uint8 _sharedDecimals, address _endpoint, address _owner) {
token = _token;
if (_tokenDecimals < _sharedDecimals) revert Stargate_InvalidTokenDecimals();
convertRate = 10 ** (_tokenDecimals - _sharedDecimals);
sharedDecimals = _sharedDecimals;
endpoint = ILayerZeroEndpointV2(_endpoint);
localEid = endpoint.eid();
_transferOwnership(_owner);
}
// ---------------------------------- Only Owner ------------------------------------------
/// @notice Configure the roles for this contract.
/// @param _config An AddressConfig object containing the addresses for the different roles used by Stargate.
function setAddressConfig(AddressConfig calldata _config) external onlyOwner {
feeLib = _config.feeLib;
planner = _config.planner;
treasurer = _config.treasurer;
tokenMessaging = _config.tokenMessaging;
creditMessaging = _config.creditMessaging;
lzToken = _config.lzToken;
emit AddressConfigSet(_config);
}
/// @notice Sets a given Path as using OFT or resets it from OFT.
/// @dev Set the path as OFT if the remote chain is using OFT.
/// @dev When migrating from OFT to pool on remote chain (e.g. migrate USDC to circles), reset the path to non-OFT.
/// @dev Reverts with InvalidPath if the destination chain is the same as local.
/// @param _dstEid The destination chain endpoint ID
/// @param _oft Whether to set or reset the path
function setOFTPath(uint32 _dstEid, bool _oft) external onlyOwner {
if (_dstEid == localEid) revert Stargate_InvalidPath();
paths[_dstEid].setOFTPath(_oft);
emit OFTPathSet(_dstEid, _oft);
}
// ---------------------------------- Only Treasurer ------------------------------------------
/// @notice Withdraw from the accrued fees in the treasury.
/// @param _to The destination account
/// @param _amountSD The amount to withdraw in SD
function withdrawTreasuryFee(address _to, uint64 _amountSD) external onlyCaller(treasurer) {
treasuryFee -= _amountSD;
_safeOutflow(_to, _sd2ld(_amountSD));
emit TreasuryFeeWithdrawn(_to, _amountSD);
}
/// @notice Add tokens to the treasury, from the senders account.
/// @dev Only used for increasing the overall budget for transaction rewards
/// @dev The treasuryFee is essentially the reward pool.
/// @dev Rewards are capped to the treasury amount, which limits exposure so
/// @dev Stargate does not pay beyond what it's charged.
/// @param _amountLD The amount to add in LD
function addTreasuryFee(uint256 _amountLD) external payable onlyCaller(treasurer) {
_assertMsgValue(_amountLD);
uint64 amountSD = _inflow(msg.sender, _amountLD);
treasuryFee += amountSD;
emit TreasuryFeeAdded(amountSD);
}
/// @dev Recover tokens sent to this contract by mistake.
/// @dev Only the treasurer can recover the token.
/// @dev Reverts with Stargate_RecoverTokenUnsupported if the treasurer attempts to withdraw StargateBase.token().
/// @param _token the token to recover. if 0x0 then it is native token
/// @param _to the address to send the token to
/// @param _amount the amount to send
function recoverToken(
address _token,
address _to,
uint256 _amount
) public virtual nonReentrantAndNotPaused onlyCaller(treasurer) returns (uint256) {
/// @dev Excess native is considered planner accumulated fees.
if (_token == address(0)) revert Stargate_RecoverTokenUnsupported();
Transfer.safeTransfer(_token, _to, _amount, false);
return _amount;
}
// ---------------------------------- Only Planner ------------------------------------------
/// @notice Pause or unpause a Stargate
/// @dev Be careful with this call, as it unsets the re-entry guard.
/// @param _paused Whether to pause or unpause the stargate
function setPause(bool _paused) external onlyCaller(planner) {
if (status == ENTERED) revert Stargate_ReentrantCall();
status = _paused ? PAUSED : NOT_ENTERED;
emit PauseSet(_paused);
}
function _plannerFee() internal view virtual returns (uint256) {
return address(this).balance;
}
function plannerFee() external view returns (uint256 available) {
available = _plannerFee();
}
/// @notice Withdraw planner fees accumulated in StargateBase.
/// @dev The planner fee is accumulated in StargateBase to avoid the cost of passing msg.value to TokenMessaging.
function withdrawPlannerFee() external virtual onlyCaller(planner) {
uint256 available = _plannerFee();
Transfer.safeTransferNative(msg.sender, available, false);
emit PlannerFeeWithdrawn(available);
}
// ------------------------------- Public Functions ---------------------------------------
/// @notice Send tokens through the Stargate
/// @dev Emits OFTSent when the send is successful
/// @param _sendParam The SendParam object detailing the transaction
/// @param _fee The MessagingFee object describing the fee to pay
/// @param _refundAddress The address to refund any LZ fees paid in excess
/// @return msgReceipt The receipt proving the message was sent
/// @return oftReceipt The receipt proving the OFT swap
function send(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable override returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt) {
(msgReceipt, oftReceipt, ) = sendToken(_sendParam, _fee, _refundAddress);
}
function sendToken(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
)
public
payable
override
nonReentrantAndNotPaused
returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt, Ticket memory ticket)
{
// step 1: assets inflows and apply the fee to the input amount
(bool isTaxi, uint64 amountInSD, uint64 amountOutSD) = _inflowAndCharge(_sendParam);
// step 2: generate the oft receipt
oftReceipt = OFTReceipt(_sd2ld(amountInSD), _sd2ld(amountOutSD));
// step 3: assert the messaging fee
MessagingFee memory messagingFee = _assertMessagingFee(_fee, oftReceipt.amountSentLD);
// step 4: send the token depending on the mode Taxi or Bus
if (isTaxi) {
msgReceipt = _taxi(_sendParam, messagingFee, amountOutSD, _refundAddress);
} else {
(msgReceipt, ticket) = _rideBus(_sendParam, messagingFee, amountOutSD, _refundAddress);
}
emit OFTSent(
msgReceipt.guid,
_sendParam.dstEid,
msg.sender,
oftReceipt.amountSentLD,
oftReceipt.amountReceivedLD
);
}
/// @notice Retry receiving a token that initially failed.
/// @dev The message has been delivered by the Messaging layer, so it is ok for anyone to retry.
/// @dev try to receive the token if the previous attempt failed in lzReceive
/// @dev Reverts with UnreceivedTokenNotFound if the message is not found in the cache
/// @dev Emits OFTReceived if the receive succeeds
/// @param _guid The global unique ID for the message that failed
/// @param _index The index of the message that failed
/// @param _srcEid The source endpoint ID for the message that failed
/// @param _receiver The account receiver for the message that failed
/// @param _amountLD The amount of tokens in LD to transfer to the account
/// @param _composeMsg The bytes representing the compose message in the message that failed
function retryReceiveToken(
bytes32 _guid,
uint8 _index,
uint32 _srcEid,
address _receiver,
uint256 _amountLD,
bytes calldata _composeMsg
) external nonReentrantAndNotPaused {
if (unreceivedTokens[_guid][_index] != keccak256(abi.encodePacked(_srcEid, _receiver, _amountLD, _composeMsg)))
revert Stargate_UnreceivedTokenNotFound();
delete unreceivedTokens[_guid][_index];
_safeOutflow(_receiver, _amountLD);
_postOutflow(_ld2sd(_amountLD));
if (_composeMsg.length > 0) {
endpoint.sendCompose(_receiver, _guid, 0, _composeMsg);
}
emit OFTReceived(_guid, _srcEid, _receiver, _amountLD);
}
// ------------------------------- Only Messaging ---------------------------------------
/// @notice Entrypoint for receiving tokens
/// @dev Emits OFTReceived when the OFT token is correctly received
/// @dev Emits UnreceivedTokenCached when the OFT token is not received
/// @param _origin The Origin struct describing the origin, useful for composing
/// @param _guid The global unique ID for this message, useful for composing
function receiveTokenBus(
Origin calldata _origin,
bytes32 _guid,
uint8 _seatNumber,
address _receiver,
uint64 _amountSD
) external nonReentrantAndNotPaused onlyCaller(tokenMessaging) {
uint256 amountLD = _sd2ld(_amountSD);
bool success = _outflow(_receiver, amountLD);
if (success) {
_postOutflow(_amountSD);
emit OFTReceived(_guid, _origin.srcEid, _receiver, amountLD);
} else {
/**
* @dev The busRide mode does not support composeMsg in any form. Thus we hardcode it to ""
*/
unreceivedTokens[_guid][_seatNumber] = keccak256(abi.encodePacked(_origin.srcEid, _receiver, amountLD, ""));
emit UnreceivedTokenCached(_guid, _seatNumber, _origin.srcEid, _receiver, amountLD, "");
}
}
// taxi mode
function receiveTokenTaxi(
Origin calldata _origin,
bytes32 _guid,
address _receiver,
uint64 _amountSD,
bytes calldata _composeMsg
) external nonReentrantAndNotPaused onlyCaller(tokenMessaging) {
uint256 amountLD = _sd2ld(_amountSD);
bool hasCompose = _composeMsg.length > 0;
bytes memory composeMsg;
if (hasCompose) {
composeMsg = OFTComposeMsgCodec.encode(_origin.nonce, _origin.srcEid, amountLD, _composeMsg);
}
bool success = _outflow(_receiver, amountLD);
if (success) {
_postOutflow(_amountSD);
// send the composeMsg to the endpoint
if (hasCompose) {
endpoint.sendCompose(_receiver, _guid, 0, composeMsg);
}
emit OFTReceived(_guid, _origin.srcEid, _receiver, amountLD);
} else {
/**
* @dev We use the '0' index to represent the seat number. This is because for a type 'taxi' msg,
* there is only ever one corresponding receiveTokenTaxi function per GUID.
*/
unreceivedTokens[_guid][0] = keccak256(abi.encodePacked(_origin.srcEid, _receiver, amountLD, composeMsg));
emit UnreceivedTokenCached(_guid, 0, _origin.srcEid, _receiver, amountLD, composeMsg);
}
}
function sendCredits(
uint32 _dstEid,
TargetCredit[] calldata _credits
) external nonReentrantAndNotPaused onlyCaller(creditMessaging) returns (Credit[] memory) {
Credit[] memory credits = new Credit[](_credits.length);
uint256 index = 0;
for (uint256 i = 0; i < _credits.length; i++) {
TargetCredit calldata c = _credits[i];
uint64 decreased = paths[c.srcEid].tryDecreaseCredit(c.amount, c.minAmount);
if (decreased > 0) credits[index++] = Credit(c.srcEid, decreased);
}
// resize the array to the actual number of credits
assembly {
mstore(credits, index)
}
emit CreditsSent(_dstEid, credits);
return credits;
}
/// @notice Entrypoint for receiving credits into paths
/// @dev Emits CreditsReceived when credits are received
/// @param _srcEid The endpoint ID of the source of credits
/// @param _credits An array indicating to which paths and how much credits to add
function receiveCredits(
uint32 _srcEid,
Credit[] calldata _credits
) external nonReentrantAndNotPaused onlyCaller(creditMessaging) {
for (uint256 i = 0; i < _credits.length; i++) {
Credit calldata c = _credits[i];
paths[c.srcEid].increaseCredit(c.amount);
}
emit CreditsReceived(_srcEid, _credits);
}
// ---------------------------------- View Functions ------------------------------------------
/// @notice Provides a quote for sending OFT to another chain.
/// @dev Implements the IOFT interface
/// @param _sendParam The parameters for the send operation
/// @return limit The information on OFT transfer limits
/// @return oftFeeDetails The details of OFT transaction cost or reward
/// @return receipt The OFT receipt information, indicating how many tokens would be sent and received
function quoteOFT(
SendParam calldata _sendParam
) external view returns (OFTLimit memory limit, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory receipt) {
// cap the transfer to the paths limit
limit = OFTLimit(_sd2ld(1), _sd2ld(paths[_sendParam.dstEid].credit));
// get the expected amount in the destination chain from FeeLib
uint64 amountInSD = _ld2sd(_sendParam.amountLD > limit.maxAmountLD ? limit.maxAmountLD : _sendParam.amountLD);
FeeParams memory params = _buildFeeParams(_sendParam.dstEid, amountInSD, _isTaxiMode(_sendParam.oftCmd));
uint64 amountOutSD = IStargateFeeLib(feeLib).applyFeeView(params);
// fill in the FeeDetails if there is a fee or reward
if (amountOutSD != amountInSD) {
oftFeeDetails = new OFTFeeDetail[](1);
if (amountOutSD < amountInSD) {
// fee
oftFeeDetails[0] = OFTFeeDetail(-1 * _sd2ld(amountInSD - amountOutSD).toInt256(), "protocol fee");
} else if (amountOutSD > amountInSD) {
// reward
uint64 reward = amountOutSD - amountInSD;
(amountOutSD, reward) = _capReward(amountOutSD, reward);
if (amountOutSD == amountInSD) {
// hide the Fee detail if the reward is capped to 0
oftFeeDetails = new OFTFeeDetail[](0);
} else {
oftFeeDetails[0] = OFTFeeDetail(_sd2ld(reward).toInt256(), "reward");
}
}
}
receipt = OFTReceipt(_sd2ld(amountInSD), _sd2ld(amountOutSD));
}
/// @notice Provides a quote for the send() operation.
/// @dev Implements the IOFT interface.
/// @dev Reverts with InvalidAmount if send mode is drive but value is specified.
/// @param _sendParam The parameters for the send() operation
/// @param _payInLzToken Flag indicating whether the caller is paying in the LZ token
/// @return fee The calculated LayerZero messaging fee from the send() operation
/// @dev MessagingFee: LayerZero message fee
/// - nativeFee: The native fee.
/// - lzTokenFee: The LZ token fee.
function quoteSend(
SendParam calldata _sendParam,
bool _payInLzToken
) external view returns (MessagingFee memory fee) {
uint64 amountSD = _ld2sd(_sendParam.amountLD);
if (amountSD == 0) revert Stargate_InvalidAmount();
bool isTaxi = _isTaxiMode(_sendParam.oftCmd);
if (isTaxi) {
fee = ITokenMessaging(tokenMessaging).quoteTaxi(
TaxiParams({
sender: msg.sender,
dstEid: _sendParam.dstEid,
receiver: _sendParam.to,
amountSD: amountSD,
composeMsg: _sendParam.composeMsg,
extraOptions: _sendParam.extraOptions
}),
_payInLzToken
);
} else {
bool nativeDrop = _sendParam.extraOptions.length > 0;
fee = ITokenMessaging(tokenMessaging).quoteRideBus(_sendParam.dstEid, nativeDrop);
}
}
/// @notice Returns the current roles configured.
/// @return An AddressConfig struct containing the current configuration
function getAddressConfig() external view returns (AddressConfig memory) {
return
AddressConfig({
feeLib: feeLib,
planner: planner,
treasurer: treasurer,
tokenMessaging: tokenMessaging,
creditMessaging: creditMessaging,
lzToken: lzToken
});
}
/// @notice Get the OFT version information
/// @dev Implements the IOFT interface.
/// @dev 0 version means the message encoding is not compatible with the default OFT.
/// @return interfaceId The ERC165 interface ID for this contract
/// @return version The cross-chain compatible message encoding version.
function oftVersion() external pure override returns (bytes4 interfaceId, uint64 version) {
return (type(IOFT).interfaceId, 0);
}
/// @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
/// @dev Implements the IOFT interface.
/// @return Whether approval of the underlying token implementation is required
function approvalRequired() external pure override returns (bool) {
return true;
}
// ---------------------------------- Internal Functions ------------------------------------------
/// @notice Ingest value into the contract and charge the Stargate fee.
/// @dev This is triggered when value is transferred from an account into Stargate to execute a swap.
/// @param _sendParam A SendParam struct containing the swap information
function _inflowAndCharge(
SendParam calldata _sendParam
) internal returns (bool isTaxi, uint64 amountInSD, uint64 amountOutSD) {
isTaxi = _isTaxiMode(_sendParam.oftCmd);
amountInSD = _inflow(msg.sender, _sendParam.amountLD);
FeeParams memory feeParams = _buildFeeParams(_sendParam.dstEid, amountInSD, isTaxi);
amountOutSD = _chargeFee(feeParams, _ld2sd(_sendParam.minAmountLD));
paths[_sendParam.dstEid].decreaseCredit(amountOutSD); // remove the credit from the path
_postInflow(amountOutSD); // post inflow actions with the amount deducted by the fee
}
/// @notice Consult the FeeLib the fee/reward for sending this token
/// @dev Reverts with SlippageTooHigh when the slippage amount sent would be below the desired minimum or zero.
/// @return amountOutSD The actual amount that would be sent after applying fees/rewards
function _chargeFee(FeeParams memory _feeParams, uint64 _minAmountOutSD) internal returns (uint64 amountOutSD) {
// get the output amount from the fee library
amountOutSD = IStargateFeeLib(feeLib).applyFee(_feeParams);
uint64 amountInSD = _feeParams.amountInSD;
if (amountOutSD < amountInSD) {
// fee
treasuryFee += amountInSD - amountOutSD;
} else if (amountOutSD > amountInSD) {
// reward
uint64 reward = amountOutSD - amountInSD;
(amountOutSD, reward) = _capReward(amountOutSD, reward);
if (reward > 0) treasuryFee -= reward;
}
if (amountOutSD < _minAmountOutSD || amountOutSD == 0) revert Stargate_SlippageTooHigh(); // 0 not allowed
}
function _taxi(
SendParam calldata _sendParam,
MessagingFee memory _messagingFee,
uint64 _amountSD,
address _refundAddress
) internal returns (MessagingReceipt memory receipt) {
if (_messagingFee.lzTokenFee > 0) _payLzToken(_messagingFee.lzTokenFee); // handle lz token fee
receipt = ITokenMessaging(tokenMessaging).taxi{ value: _messagingFee.nativeFee }(
TaxiParams({
sender: msg.sender,
dstEid: _sendParam.dstEid,
receiver: _sendParam.to,
amountSD: _amountSD,
composeMsg: _sendParam.composeMsg,
extraOptions: _sendParam.extraOptions
}),
_messagingFee,
_refundAddress
);
}
function _rideBus(
SendParam calldata _sendParam,
MessagingFee memory _messagingFee,
uint64 _amountSD,
address _refundAddress
) internal virtual returns (MessagingReceipt memory receipt, Ticket memory ticket) {
if (_messagingFee.lzTokenFee > 0) revert Stargate_LzTokenUnavailable();
(receipt, ticket) = ITokenMessaging(tokenMessaging).rideBus(
RideBusParams({
sender: msg.sender,
dstEid: _sendParam.dstEid,
receiver: _sendParam.to,
amountSD: _amountSD,
nativeDrop: _sendParam.extraOptions.length > 0
})
);
uint256 busFare = receipt.fee.nativeFee;
uint256 providedFare = _messagingFee.nativeFee;
// assert sufficient nativeFee was provided to cover the fare
if (busFare == providedFare) {
// return; Do nothing in this case
} else if (providedFare > busFare) {
uint256 refund;
unchecked {
refund = providedFare - busFare;
}
Transfer.transferNative(_refundAddress, refund, false); // no gas limit to refund
} else {
revert Stargate_InsufficientFare();
}
}
/// @notice Pay the LZ fee in LZ tokens.
/// @dev Reverts with LzTokenUnavailable if the LZ token OFT has not been set.
/// @param _lzTokenFee The fee to pay in LZ tokens
function _payLzToken(uint256 _lzTokenFee) internal {
address lzTkn = lzToken;
if (lzTkn == address(0)) revert Stargate_LzTokenUnavailable();
Transfer.safeTransferTokenFrom(lzTkn, msg.sender, address(endpoint), _lzTokenFee);
}
/// @notice Translate an amount in SD to LD
/// @dev Since SD <= LD by definition, convertRate >= 1, so there is no rounding errors in this function.
/// @param _amountSD The amount in SD
/// @return amountLD The same value expressed in LD
function _sd2ld(uint64 _amountSD) internal view returns (uint256 amountLD) {
unchecked {
amountLD = _amountSD * convertRate;
}
}
/// @notice Translate an value in LD to SD
/// @dev Since SD <= LD by definition, convertRate >= 1, so there might be rounding during the cast.
/// @param _amountLD The value in LD
/// @return amountSD The same value expressed in SD
function _ld2sd(uint256 _amountLD) internal view returns (uint64 amountSD) {
unchecked {
amountSD = SafeCast.toUint64(_amountLD / convertRate);
}
}
/// @dev if _cmd is empty, Taxi mode. Otherwise, Bus mode
function _isTaxiMode(bytes calldata _oftCmd) internal pure returns (bool) {
return _oftCmd.length == 0;
}
// ---------------------------------- Virtual Functions ------------------------------------------
/// @notice Limits the reward awarded when withdrawing value.
/// @param _amountOutSD The amount of expected on the destination chain in SD
/// @param _reward The initial calculated reward by FeeLib
/// @return newAmountOutSD The actual amount to be delivered on the destination chain
/// @return newReward The actual reward after applying any caps
function _capReward(
uint64 _amountOutSD,
uint64 _reward
) internal view virtual returns (uint64 newAmountOutSD, uint64 newReward);
/// @notice Hook called when there is ingress of value into the contract.
/// @param _from The account from which to obtain the value
/// @param _amountLD The amount of tokens to get from the account in LD
/// @return amountSD The actual amount of tokens in SD that got into the Stargate
function _inflow(address _from, uint256 _amountLD) internal virtual returns (uint64 amountSD);
/// @notice Hook called when there is egress of value out of the contract.
/// @return success Whether the outflow was successful
function _outflow(address _to, uint256 _amountLD) internal virtual returns (bool success);
/// @notice Hook called when there is egress of value out of the contract.
/// @dev Reverts with OutflowFailed when the outflow hook fails
function _safeOutflow(address _to, uint256 _amountLD) internal virtual {
bool success = _outflow(_to, _amountLD);
if (!success) revert Stargate_OutflowFailed();
}
/// @notice Ensure that the value passed through the message equals the native fee
/// @dev the native fee should be the same as msg value by default
/// @dev Reverts with InvalidAmount if the native fee does not match the value passed.
/// @param _fee The MessagingFee object containing the expected fee
/// @return The messaging fee object
function _assertMessagingFee(
MessagingFee memory _fee,
uint256 /*_amountInLD*/
) internal view virtual returns (MessagingFee memory) {
if (_fee.nativeFee != msg.value) revert Stargate_InvalidAmount();
return _fee;
}
/// @notice Ensure the msg.value is as expected.
/// @dev Override this contract to provide a specific validation.
/// @dev This implementation will revert if value is passed, because we do not expect value except for
/// @dev the native token when adding to the treasury.
/// @dev Reverts with InvalidAmount if msg.value > 0
function _assertMsgValue(uint256 /*_amountLD*/) internal view virtual {
if (msg.value > 0) revert Stargate_InvalidAmount();
}
/// @dev Build the FeeParams object for the FeeLib
/// @param _dstEid The destination endpoint ID
/// @param _amountInSD The amount to send in SD
/// @param _isTaxi Whether this send is riding the bus or taxing
function _buildFeeParams(
uint32 _dstEid,
uint64 _amountInSD,
bool _isTaxi
) internal view virtual returns (FeeParams memory);
/// @notice Hook called after the inflow of value into the contract by sendToken().
/// Function meant to be overridden
// solhint-disable-next-line no-empty-blocks
function _postInflow(uint64 _amountSD) internal virtual {}
/// @notice Hook called after the outflow of value out of the contract by receiveToken().
/// Function meant to be overridden
// solhint-disable-next-line no-empty-blocks
function _postOutflow(uint64 _amountSD) internal virtual {}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { StargateType, MessagingReceipt, MessagingFee, SendParam, OFTReceipt } from "./interfaces/IStargate.sol";
import { IStargatePool } from "./interfaces/IStargatePool.sol";
import { ITokenMessaging, TaxiParams } from "./interfaces/ITokenMessaging.sol";
import { Transfer } from "./libs/Transfer.sol";
import { StargateBase, FeeParams } from "./StargateBase.sol";
import { LPToken } from "./utils/LPToken.sol";
/// @title A Stargate contract representing a liquidity pool. Users can deposit tokens into the pool and receive
/// @title LP tokens in exchange, which can be later be redeemed to recover their deposit and a reward which is
/// @title a fraction of the fee accrued by the liquidity pool during the staking time.
contract StargatePool is StargateBase, IStargatePool {
LPToken internal immutable lp;
uint64 internal tvlSD;
uint64 internal poolBalanceSD;
uint64 internal deficitOffsetSD;
event Deposited(address indexed payer, address indexed receiver, uint256 amountLD);
event Redeemed(address indexed payer, address indexed receiver, uint256 amountLD);
error Stargate_OnlyTaxi();
/// @notice Create a Stargate pool to provide liquidity. This also creates the LP token contract.
/// @param _lpTokenName The name for the LP token
/// @param _lpTokenSymbol The symbol for the LP token
/// @param _token The token for the pool or oft. If the token is address(0), it is the native coin
/// @param _tokenDecimals The number of decimals for this tokens implementation on this chain
/// @param _sharedDecimals The number of decimals shared between all implementations of the OFT
/// @param _endpoint The LZ endpoint contract
/// @param _owner The owner of this contract
constructor(
string memory _lpTokenName,
string memory _lpTokenSymbol,
address _token,
uint8 _tokenDecimals,
uint8 _sharedDecimals,
address _endpoint,
address _owner
) StargateBase(_token, _tokenDecimals, _sharedDecimals, _endpoint, _owner) {
lp = new LPToken(_lpTokenName, _lpTokenSymbol, _tokenDecimals);
}
// -------- LP operations --------
/// @notice Deposit token into the pool
/// @dev Emits Deposited when the token is deposited
/// @param _receiver The account to mint the LP tokens to
/// @param _amountLD The amount of tokens to deposit in LD
/// @return amountLD The actual amount of tokens deposited in LD
function deposit(
address _receiver,
uint256 _amountLD
) external payable nonReentrantAndNotPaused returns (uint256 amountLD) {
// charge the sender
_assertMsgValue(_amountLD);
uint64 amountSD = _inflow(msg.sender, _amountLD);
_postInflow(amountSD); // increase the local credit and pool balance
// mint LP token to the receiver
amountLD = _sd2ld(amountSD);
lp.mint(_receiver, amountLD);
tvlSD += amountSD;
emit Deposited(msg.sender, _receiver, amountLD);
}
/// @notice Redeem the LP token of the sender and return the underlying token to receiver
/// @dev Emits Redeemed when the LP tokens are redeemed successfully.
/// @dev Reverts if the sender does not hold enough LP tokens or if the pool does not have enough credit.
/// @param _amountLD The amount of LP token to redeem in LD
/// @param _receiver The account to which to return the underlying tokens
/// @return amountLD The amount of LP token burned and the amount of underlying token sent to the receiver
function redeem(uint256 _amountLD, address _receiver) external nonReentrantAndNotPaused returns (uint256 amountLD) {
uint64 amountSD = _ld2sd(_amountLD);
paths[localEid].decreaseCredit(amountSD);
// de-dust LP token
amountLD = _sd2ld(amountSD);
// burn LP token. Will revert if the sender doesn't have enough LP token
lp.burnFrom(msg.sender, amountLD);
tvlSD -= amountSD;
// send the underlying token from the pool to the receiver
_safeOutflow(_receiver, amountLD);
_postOutflow(amountSD); // decrease the pool balance
emit Redeemed(msg.sender, _receiver, amountLD);
}
/// @notice Redeem LP tokens and use the withdrawn tokens to execute a send
/// @dev Emits Redeemed when the LP tokens are redeemed successfully.
/// @dev Emits OFTSent when the LP tokens are redeemed successfully.
/// @param _sendParam The RedeemSendParam object describing the redeem and send
/// @param _fee The MessagingFee describing the fee to pay for the send
/// @param _refundAddress The address to refund any LZ fees paid in excess
/// @return msgReceipt The messaging receipt proving the send
/// @return oftReceipt The OFT receipt proving the send
function redeemSend(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
)
external
payable
nonReentrantAndNotPaused
returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt)
{
if (!_isTaxiMode(_sendParam.oftCmd)) revert Stargate_OnlyTaxi();
// remove the dust
uint64 amountInSD = _ld2sd(_sendParam.amountLD);
uint256 amountInLD = _sd2ld(amountInSD);
// burn LP token of 'msg.sender'. it will revert if the sender doesn't have enough LP token
lp.burnFrom(msg.sender, amountInLD);
emit Redeemed(msg.sender, address(0), amountInLD);
// charge fees and handle credit
FeeParams memory feeParams = _buildFeeParams(_sendParam.dstEid, amountInSD, true);
uint64 amountOutSD = _chargeFee(feeParams, _ld2sd(_sendParam.minAmountLD));
// need to update the TVL after charging the fee, otherwise the deficit will be wrong
tvlSD -= amountInSD;
// handle credit and pool balance
// due to the both of them are already increased when deposit, so if
// 1) the amountOutSD is less than amountInSD, the fee should be removed from both of them
// 2) the amountOutSD is more than amountInSD, the reward should be added to both of them
paths[_sendParam.dstEid].decreaseCredit(amountOutSD);
if (amountInSD > amountOutSD) {
// fee
uint64 fee = amountInSD - amountOutSD;
paths[localEid].decreaseCredit(fee);
poolBalanceSD -= fee;
} else if (amountInSD < amountOutSD) {
// reward
uint64 reward = amountOutSD - amountInSD;
paths[localEid].increaseCredit(reward);
poolBalanceSD += reward;
}
// send the token to the receiver
MessagingFee memory messagingFee = _assertMessagingFee(_fee, 0);
msgReceipt = _taxi(_sendParam, messagingFee, amountOutSD, _refundAddress);
oftReceipt = OFTReceipt(amountInLD, _sd2ld(amountOutSD));
emit OFTSent(msgReceipt.guid, _sendParam.dstEid, msg.sender, amountInLD, oftReceipt.amountReceivedLD);
}
/// @notice Get how many LP tokens can be redeemed by a given account.
/// @dev Use 0x0 to get the total maximum redeemable (since its capped to the local credit)
/// @param _owner The account to check for
/// @return amountLD The max amount of LP tokens redeemable by the account
function redeemable(address _owner) external view returns (uint256 amountLD) {
uint256 cap = _sd2ld(paths[localEid].credit);
if (_owner == address(0)) {
amountLD = cap;
} else {
uint256 userLp = lp.balanceOf(_owner);
amountLD = cap > userLp ? userLp : cap;
}
}
/// @notice Get a quote on the fee associated with a RedeemSend operation
/// @param _sendParam The RedeemSendParam object describing the RedeemSend
/// @param _payInLzToken Whether to pay the LZ fee in LZ token
/// @return fee The MessagingFee object that describes the Fee that would be associated with this RedeemSend
function quoteRedeemSend(
SendParam calldata _sendParam,
bool _payInLzToken
) external view returns (MessagingFee memory fee) {
if (!_isTaxiMode(_sendParam.oftCmd)) revert Stargate_OnlyTaxi();
uint64 amountInSD = _ld2sd(_sendParam.amountLD);
fee = ITokenMessaging(tokenMessaging).quoteTaxi(
TaxiParams({
sender: msg.sender,
dstEid: _sendParam.dstEid,
receiver: _sendParam.to,
amountSD: amountInSD,
composeMsg: _sendParam.composeMsg,
extraOptions: _sendParam.extraOptions
}),
_payInLzToken
);
}
/// @notice Get the total value locked in this pool
/// @dev The TVL of the pool is the total supply of the LP token since they are minted 1:1.
/// @return The total value locked in LD
function tvl() external view override returns (uint256) {
return _sd2ld(tvlSD);
}
/// @notice Get the current pool balance
/// @dev The pool balance is the total amount of tokens in the pool, it reflects liquidity.
/// @return The pool balance in LD
function poolBalance() external view override returns (uint256) {
return _sd2ld(poolBalanceSD);
}
/// @notice Get the current deficit offset
/// @dev The deficit offset allows manipulation of the ideal pool liquidity beyond surplus 0.
/// @return The deficit offset in LD
function deficitOffset() external view returns (uint256) {
return _sd2ld(deficitOffsetSD);
}
/// @notice Returns the type of Stargate contract.
/// @dev Fulfills the IStargate interface.
/// @return The type of Stargate contract
function stargateType() external pure override returns (StargateType) {
return StargateType.Pool;
}
/// @notice Returns the LP token contract used to represent pool ownership.
/// @return The address of the LP token contract.
function lpToken() external view override returns (address) {
return address(lp);
}
/// @notice Limits the reward awarded when withdrawing value.
/// @dev Concretes the StargateBase contract.
/// @dev Liquidity pools cap the reward to the total fees accrued in the treasury.
/// @param _amountOutSD The amount of tokens expected on the destination chain in SD
/// @param _reward The initial calculated reward by FeeLib
/// @return newAmountOutSD The actual amount to be received on the destination chain
/// @return newReward The actual reward after applying any caps
function _capReward(uint64 _amountOutSD, uint64 _reward) internal view override returns (uint64, uint64) {
uint64 rewardCap = treasuryFee;
if (_reward > rewardCap) {
// exceeds cap, recalculate with new reward
unchecked {
return (_amountOutSD - _reward + rewardCap, rewardCap);
}
} else {
// lower than cap, return the original values
return (_amountOutSD, _reward);
}
}
/// @notice Increase the local credit and pool balance
function _postInflow(uint64 _amountSD) internal override {
paths[localEid].increaseCredit(_amountSD);
poolBalanceSD += _amountSD;
}
/// @notice Decrease the pool balance
function _postOutflow(uint64 _amountSD) internal override {
poolBalanceSD -= _amountSD;
}
/// @notice Charge an account an amount of pooled tokens.
/// @dev Reverts if the charge can not be completed.
/// @param _from The account to charge
/// @param _amountLD How many tokens to charge in LD
/// @return amountSD The amount of tokens charged in SD
function _inflow(address _from, uint256 _amountLD) internal virtual override returns (uint64 amountSD) {
amountSD = _ld2sd(_amountLD);
Transfer.safeTransferTokenFrom(token, _from, address(this), _sd2ld(amountSD)); // remove the dust and transfer
}
/// @notice Transfer a token from the pool to an account.
/// @param _to The destination account
/// @param _amountLD How many tokens to transfer in LD
/// @return success Whether the transfer succeeded or not
function _outflow(address _to, uint256 _amountLD) internal virtual override returns (bool success) {
success = Transfer.transferToken(token, _to, _amountLD);
}
function _buildFeeParams(
uint32 _dstEid,
uint64 _amountInSD,
bool _isTaxi
) internal view override returns (FeeParams memory) {
uint64 t = tvlSD + deficitOffsetSD;
uint64 deficitSD = t > poolBalanceSD ? t - poolBalanceSD : 0;
return FeeParams(msg.sender, _dstEid, _amountInSD, deficitSD, paths[_dstEid].isOFTPath(), _isTaxi);
}
// ---------------------------------- Only Treasurer ------------------------------------------
function recoverToken(
address _token,
address _to,
uint256 _amount
) public virtual override onlyCaller(treasurer) returns (uint256) {
// only allow to recover the excess of poolBalanceSD + treasuryFee if the token is the pool token
if (_token == token) {
uint256 cap = _thisBalance() - _sd2ld(poolBalanceSD + treasuryFee);
_amount = _amount > cap ? cap : _amount;
}
return super.recoverToken(_token, _to, _amount);
}
function _thisBalance() internal view virtual returns (uint256) {
return IERC20(token).balanceOf(address(this));
}
// ---------------------------------- Only Planner ------------------------------------------
function setDeficitOffset(uint256 _deficitOffsetLD) external onlyCaller(planner) {
deficitOffsetSD = _ld2sd(_deficitOffsetLD);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC20Minter } from "./interfaces/IERC20Minter.sol";
import { StargatePool } from "./StargatePool.sol";
/// @title StargatePoolMigratable
/// @notice A StargatePool that allows the owner to burn locked tokens during bridged token migration.
contract StargatePoolMigratable is StargatePool {
error StargatePoolMigratable_BurnAmountExceedsBalance();
address public burnAdmin;
uint64 public burnAllowanceSD;
constructor(
string memory _lpTokenName,
string memory _lpTokenSymbol,
address _token,
uint8 _tokenDecimals,
uint8 _sharedDecimals,
address _endpoint,
address _owner
) StargatePool(_lpTokenName, _lpTokenSymbol, _token, _tokenDecimals, _sharedDecimals, _endpoint, _owner) {}
/// @notice Allow a given address to burn up to a given allowance of tokens.
function allowBurn(address _burnAdmin, uint64 _burnAllowanceSD) external onlyOwner {
burnAdmin = _burnAdmin;
burnAllowanceSD = _burnAllowanceSD;
}
/// @notice Burn locked tokens during bridged token migration.
function burnLocked() external onlyCaller(burnAdmin) {
if (burnAllowanceSD > poolBalanceSD) revert StargatePoolMigratable_BurnAmountExceedsBalance();
uint64 previousBurnAllowanceSD = burnAllowanceSD;
poolBalanceSD -= burnAllowanceSD;
burnAllowanceSD = 0;
uint256 burnAllowanceLD = _sd2ld(previousBurnAllowanceSD);
IERC20(token).approve(address(this), burnAllowanceLD);
IERC20Minter(token).burnFrom(address(this), burnAllowanceLD);
paths[localEid].burnCredit(previousBurnAllowanceSD);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```solidity
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
* _Available since v4.9 for `string`, `bytes`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
struct StringSlot {
string value;
}
struct BytesSlot {
bytes value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `StringSlot` with member `value` located at `slot`.
*/
function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `StringSlot` representation of the string storage pointer `store`.
*/
function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := store.slot
}
}
/**
* @dev Returns an `BytesSlot` with member `value` located at `slot`.
*/
function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
*/
function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := store.slot
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
import "./math/SignedMath.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `int256` to its ASCII `string` decimal representation.
*/
function toString(int256 value) internal pure returns (string memory) {
return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
/**
* @dev Returns true if the two strings are equal.
*/
function equal(string memory a, string memory b) internal pure returns (bool) {
return keccak256(bytes(a)) == keccak256(bytes(b));
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/// @dev WARNING: Transferring tokens, when the token address is wrong, will fail silently.
contract Transfer is Ownable {
error Transfer_TransferFailed();
error Transfer_ApproveFailed();
// @dev default this to 2300, but it is modifiable
// @dev this is intended to provide just enough gas to receive native tokens.
// @dev ie. empty fallbacks or EOA addresses
uint256 internal transferGasLimit = 2300;
function getTransferGasLimit() external view returns (uint256) {
return transferGasLimit;
}
function setTransferGasLimit(uint256 _gasLimit) external onlyOwner {
transferGasLimit = _gasLimit;
}
/// @notice Transfer native coin to an account
/// @dev If gas is unlimited, we pass 63/64 of the gasleft()
/// @dev This call may revert due to out of gas instead of returning false.
/// @param _to The account to transfer native coin to
/// @param _value The amount of native coin to transfer
/// @param _gasLimited Whether to limit gas available for the 'fall-back'
/// @return success Whether the transfer was successful
function transferNative(address _to, uint256 _value, bool _gasLimited) internal returns (bool success) {
uint256 gasForCall = _gasLimited ? transferGasLimit : gasleft();
// @dev We dont care about the data returned here, only success or not.
assembly {
success := call(gasForCall, _to, _value, 0, 0, 0, 0)
}
}
/// @notice Transfer an ERC20 token from the sender to an account
/// @param _token The address of the ERC20 token to send
/// @param _to The receiving account
/// @param _value The amount of tokens to transfer
/// @return success Whether the transfer was successful or not
function transferToken(address _token, address _to, uint256 _value) internal returns (bool success) {
success = _call(_token, abi.encodeWithSelector(IERC20(_token).transfer.selector, _to, _value));
}
/// @notice Transfer an ERC20 token from one account to another
/// @param _token The address of the ERC20 token to send
/// @param _from The source account
/// @param _to The destination account
/// @param _value The amount of tokens to transfer
/// @return success Whether the transfer was successful or not
function transferTokenFrom(
address _token,
address _from,
address _to,
uint256 _value
) internal returns (bool success) {
success = _call(_token, abi.encodeWithSelector(IERC20(_token).transferFrom.selector, _from, _to, _value));
}
/// @notice Transfer either native coin or ERC20 token from the sender to an account
/// @param _token The ERC20 address or 0x0 if native is desired
/// @param _to The destination account
/// @param _value the amount to transfer
/// @param _gasLimited Whether to limit the amount of gas when doing a native transfer
/// @return success Whether the transfer was successful or not
function transfer(address _token, address _to, uint256 _value, bool _gasLimited) internal returns (bool success) {
if (_token == address(0)) {
success = transferNative(_to, _value, _gasLimited);
} else {
success = transferToken(_token, _to, _value);
}
}
/// @notice Approve a given amount of token for an account
/// @param _token The OFT contract to use for approval
/// @param _spender The account to approve
/// @param _value The amount of tokens to approve
/// @return success Whether the approval succeeded
function approveToken(address _token, address _spender, uint256 _value) internal returns (bool success) {
success = _call(_token, abi.encodeWithSelector(IERC20(_token).approve.selector, _spender, _value));
}
/// @notice Transfer native coin to an account or revert
/// @dev Reverts with TransferFailed if the transfer failed
/// @param _to The account to transfer native coin to
/// @param _value The amount of native coin to transfer
/// @param _gasLimited Whether to limit the amount of gas to 2300
function safeTransferNative(address _to, uint256 _value, bool _gasLimited) internal {
if (!transferNative(_to, _value, _gasLimited)) revert Transfer_TransferFailed();
}
/// @notice Transfer an ERC20 token from one account to another or revert
/// @dev Reverts with TransferFailed when the transfer fails
/// @param _token The address of the ERC20 token to send
/// @param _to The destination account
/// @param _value The amount of tokens to transfer
function safeTransferToken(address _token, address _to, uint256 _value) internal {
if (!transferToken(_token, _to, _value)) revert Transfer_TransferFailed();
}
/// @notice Transfer an ERC20 token from one account to another
/// @dev Reverts with TransferFailed when the transfer fails
/// @param _token The address of the ERC20 token to send
/// @param _from The source account
/// @param _to The destination account
/// @param _value The amount of tokens to transfer
function safeTransferTokenFrom(address _token, address _from, address _to, uint256 _value) internal {
if (!transferTokenFrom(_token, _from, _to, _value)) revert Transfer_TransferFailed();
}
/// @notice Transfer either native coin or ERC20 token from the sender to an account
/// @dev Reverts with TransferFailed when the transfer fails
/// @param _token The ERC20 address or 0x0 if native is desired
/// @param _to The destination account
/// @param _value the amount to transfer
/// @param _gasLimited Whether to limit the amount of gas when doing a native transfer
function safeTransfer(address _token, address _to, uint256 _value, bool _gasLimited) internal {
if (!transfer(_token, _to, _value, _gasLimited)) revert Transfer_TransferFailed();
}
/// @notice Approve a given amount of token for an account or revert
/// @dev Reverts with ApproveFailed if the approval failed
/// @dev Consider using forceApproveToken(...) to ensure the approval is set correctly.
/// @param _token The OFT contract to use for approval
/// @param _spender The account to approve
/// @param _value The amount of tokens to approve
function safeApproveToken(address _token, address _spender, uint256 _value) internal {
if (!approveToken(_token, _spender, _value)) revert Transfer_ApproveFailed();
}
/// @notice Force approve a given amount of token for an account by first resetting the approval
/// @dev Some tokens that require the approval to be set to zero before setting it to a non-zero value, e.g. USDT.
/// @param _token The OFT contract to use for approval
/// @param _spender The account to approve
/// @param _value The amount of tokens to approve
function forceApproveToken(address _token, address _spender, uint256 _value) internal {
if (!approveToken(_token, _spender, _value)) {
safeApproveToken(_token, _spender, 0);
safeApproveToken(_token, _spender, _value);
}
}
function _call(address _token, bytes memory _data) private returns (bool success) {
// solhint-disable-next-line avoid-low-level-calls
(bool s, bytes memory returndata) = _token.call(_data);
success = s ? returndata.length == 0 || abi.decode(returndata, (bool)) : false;
}
}
{
"compilationTarget": {
"src/StargatePoolMigratable.sol": "StargatePoolMigratable"
},
"evmVersion": "paris",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 5000
},
"remappings": []
}
[{"inputs":[{"internalType":"string","name":"_lpTokenName","type":"string"},{"internalType":"string","name":"_lpTokenSymbol","type":"string"},{"internalType":"address","name":"_token","type":"address"},{"internalType":"uint8","name":"_tokenDecimals","type":"uint8"},{"internalType":"uint8","name":"_sharedDecimals","type":"uint8"},{"internalType":"address","name":"_endpoint","type":"address"},{"internalType":"address","name":"_owner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidLocalDecimals","type":"error"},{"inputs":[],"name":"Path_AlreadyHasCredit","type":"error"},{"inputs":[],"name":"Path_InsufficientCredit","type":"error"},{"inputs":[],"name":"Path_UnlimitedCredit","type":"error"},{"inputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"}],"name":"SlippageExceeded","type":"error"},{"inputs":[],"name":"StargatePoolMigratable_BurnAmountExceedsBalance","type":"error"},{"inputs":[],"name":"Stargate_InsufficientFare","type":"error"},{"inputs":[],"name":"Stargate_InvalidAmount","type":"error"},{"inputs":[],"name":"Stargate_InvalidPath","type":"error"},{"inputs":[],"name":"Stargate_InvalidTokenDecimals","type":"error"},{"inputs":[],"name":"Stargate_LzTokenUnavailable","type":"error"},{"inputs":[],"name":"Stargate_OnlyTaxi","type":"error"},{"inputs":[],"name":"Stargate_OutflowFailed","type":"error"},{"inputs":[],"name":"Stargate_Paused","type":"error"},{"inputs":[],"name":"Stargate_RecoverTokenUnsupported","type":"error"},{"inputs":[],"name":"Stargate_ReentrantCall","type":"error"},{"inputs":[],"name":"Stargate_SlippageTooHigh","type":"error"},{"inputs":[],"name":"Stargate_Unauthorized","type":"error"},{"inputs":[],"name":"Stargate_UnreceivedTokenNotFound","type":"error"},{"inputs":[],"name":"Transfer_ApproveFailed","type":"error"},{"inputs":[],"name":"Transfer_TransferFailed","type":"error"},{"anonymous":false,"inputs":[{"components":[{"internalType":"address","name":"feeLib","type":"address"},{"internalType":"address","name":"planner","type":"address"},{"internalType":"address","name":"treasurer","type":"address"},{"internalType":"address","name":"tokenMessaging","type":"address"},{"internalType":"address","name":"creditMessaging","type":"address"},{"internalType":"address","name":"lzToken","type":"address"}],"indexed":false,"internalType":"struct StargateBase.AddressConfig","name":"config","type":"tuple"}],"name":"AddressConfigSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint32","name":"srcEid","type":"uint32"},{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"uint64","name":"amount","type":"uint64"}],"indexed":false,"internalType":"struct Credit[]","name":"credits","type":"tuple[]"}],"name":"CreditsReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint32","name":"dstEid","type":"uint32"},{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"uint64","name":"amount","type":"uint64"}],"indexed":false,"internalType":"struct Credit[]","name":"credits","type":"tuple[]"}],"name":"CreditsSent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"payer","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"Deposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint32","name":"dstEid","type":"uint32"},{"indexed":false,"internalType":"bool","name":"oft","type":"bool"}],"name":"OFTPathSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"guid","type":"bytes32"},{"indexed":false,"internalType":"uint32","name":"srcEid","type":"uint32"},{"indexed":true,"internalType":"address","name":"toAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"name":"OFTReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"guid","type":"bytes32"},{"indexed":false,"internalType":"uint32","name":"dstEid","type":"uint32"},{"indexed":true,"internalType":"address","name":"fromAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountSentLD","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"name":"OFTSent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"amountSD","type":"uint64"}],"name":"Path_CreditBurned","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"paused","type":"bool"}],"name":"PauseSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"PlannerFeeWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"payer","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"Redeemed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"amountSD","type":"uint64"}],"name":"TreasuryFeeAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint64","name":"amountSD","type":"uint64"}],"name":"TreasuryFeeWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"guid","type":"bytes32"},{"indexed":false,"internalType":"uint8","name":"index","type":"uint8"},{"indexed":false,"internalType":"uint32","name":"srcEid","type":"uint32"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLD","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"composeMsg","type":"bytes"}],"name":"UnreceivedTokenCached","type":"event"},{"inputs":[{"internalType":"uint256","name":"_amountLD","type":"uint256"}],"name":"addTreasuryFee","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_burnAdmin","type":"address"},{"internalType":"uint64","name":"_burnAllowanceSD","type":"uint64"}],"name":"allowBurn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"approvalRequired","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"burnAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"burnAllowanceSD","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"burnLocked","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"deficitOffset","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_amountLD","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"endpoint","outputs":[{"internalType":"contract ILayerZeroEndpointV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAddressConfig","outputs":[{"components":[{"internalType":"address","name":"feeLib","type":"address"},{"internalType":"address","name":"planner","type":"address"},{"internalType":"address","name":"treasurer","type":"address"},{"internalType":"address","name":"tokenMessaging","type":"address"},{"internalType":"address","name":"creditMessaging","type":"address"},{"internalType":"address","name":"lzToken","type":"address"}],"internalType":"struct StargateBase.AddressConfig","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTransferGasLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"localEid","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lpToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"oftVersion","outputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"},{"internalType":"uint64","name":"version","type":"uint64"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"eid","type":"uint32"}],"name":"paths","outputs":[{"internalType":"uint64","name":"credit","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"plannerFee","outputs":[{"internalType":"uint256","name":"available","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"}],"name":"quoteOFT","outputs":[{"components":[{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"uint256","name":"maxAmountLD","type":"uint256"}],"internalType":"struct OFTLimit","name":"limit","type":"tuple"},{"components":[{"internalType":"int256","name":"feeAmountLD","type":"int256"},{"internalType":"string","name":"description","type":"string"}],"internalType":"struct OFTFeeDetail[]","name":"oftFeeDetails","type":"tuple[]"},{"components":[{"internalType":"uint256","name":"amountSentLD","type":"uint256"},{"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"internalType":"struct OFTReceipt","name":"receipt","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"internalType":"bool","name":"_payInLzToken","type":"bool"}],"name":"quoteRedeemSend","outputs":[{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"internalType":"bool","name":"_payInLzToken","type":"bool"}],"name":"quoteSend","outputs":[{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"_srcEid","type":"uint32"},{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"uint64","name":"amount","type":"uint64"}],"internalType":"struct Credit[]","name":"_credits","type":"tuple[]"}],"name":"receiveCredits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"bytes32","name":"sender","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"}],"internalType":"struct Origin","name":"_origin","type":"tuple"},{"internalType":"bytes32","name":"_guid","type":"bytes32"},{"internalType":"uint8","name":"_seatNumber","type":"uint8"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"uint64","name":"_amountSD","type":"uint64"}],"name":"receiveTokenBus","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"bytes32","name":"sender","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"}],"internalType":"struct Origin","name":"_origin","type":"tuple"},{"internalType":"bytes32","name":"_guid","type":"bytes32"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"uint64","name":"_amountSD","type":"uint64"},{"internalType":"bytes","name":"_composeMsg","type":"bytes"}],"name":"receiveTokenTaxi","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"recoverToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountLD","type":"uint256"},{"internalType":"address","name":"_receiver","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"_fee","type":"tuple"},{"internalType":"address","name":"_refundAddress","type":"address"}],"name":"redeemSend","outputs":[{"components":[{"internalType":"bytes32","name":"guid","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"internalType":"struct MessagingReceipt","name":"msgReceipt","type":"tuple"},{"components":[{"internalType":"uint256","name":"amountSentLD","type":"uint256"},{"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"internalType":"struct OFTReceipt","name":"oftReceipt","type":"tuple"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"redeemable","outputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_guid","type":"bytes32"},{"internalType":"uint8","name":"_index","type":"uint8"},{"internalType":"uint32","name":"_srcEid","type":"uint32"},{"internalType":"address","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_amountLD","type":"uint256"},{"internalType":"bytes","name":"_composeMsg","type":"bytes"}],"name":"retryReceiveToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"_fee","type":"tuple"},{"internalType":"address","name":"_refundAddress","type":"address"}],"name":"send","outputs":[{"components":[{"internalType":"bytes32","name":"guid","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"internalType":"struct MessagingReceipt","name":"msgReceipt","type":"tuple"},{"components":[{"internalType":"uint256","name":"amountSentLD","type":"uint256"},{"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"internalType":"struct OFTReceipt","name":"oftReceipt","type":"tuple"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint32","name":"_dstEid","type":"uint32"},{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"uint64","name":"amount","type":"uint64"},{"internalType":"uint64","name":"minAmount","type":"uint64"}],"internalType":"struct TargetCredit[]","name":"_credits","type":"tuple[]"}],"name":"sendCredits","outputs":[{"components":[{"internalType":"uint32","name":"srcEid","type":"uint32"},{"internalType":"uint64","name":"amount","type":"uint64"}],"internalType":"struct Credit[]","name":"","type":"tuple[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"_fee","type":"tuple"},{"internalType":"address","name":"_refundAddress","type":"address"}],"name":"sendToken","outputs":[{"components":[{"internalType":"bytes32","name":"guid","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"internalType":"struct MessagingReceipt","name":"msgReceipt","type":"tuple"},{"components":[{"internalType":"uint256","name":"amountSentLD","type":"uint256"},{"internalType":"uint256","name":"amountReceivedLD","type":"uint256"}],"internalType":"struct OFTReceipt","name":"oftReceipt","type":"tuple"},{"components":[{"internalType":"uint72","name":"ticketId","type":"uint72"},{"internalType":"bytes","name":"passengerBytes","type":"bytes"}],"internalType":"struct Ticket","name":"ticket","type":"tuple"}],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"feeLib","type":"address"},{"internalType":"address","name":"planner","type":"address"},{"internalType":"address","name":"treasurer","type":"address"},{"internalType":"address","name":"tokenMessaging","type":"address"},{"internalType":"address","name":"creditMessaging","type":"address"},{"internalType":"address","name":"lzToken","type":"address"}],"internalType":"struct StargateBase.AddressConfig","name":"_config","type":"tuple"}],"name":"setAddressConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_deficitOffsetLD","type":"uint256"}],"name":"setDeficitOffset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"_dstEid","type":"uint32"},{"internalType":"bool","name":"_oft","type":"bool"}],"name":"setOFTPath","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_paused","type":"bool"}],"name":"setPause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_gasLimit","type":"uint256"}],"name":"setTransferGasLimit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"sharedDecimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stargateType","outputs":[{"internalType":"enum StargateType","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"status","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"treasuryFee","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tvl","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"guid","type":"bytes32"},{"internalType":"uint8","name":"index","type":"uint8"}],"name":"unreceivedTokens","outputs":[{"internalType":"bytes32","name":"hash","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdrawPlannerFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint64","name":"_amountSD","type":"uint64"}],"name":"withdrawTreasuryFee","outputs":[],"stateMutability":"nonpayable","type":"function"}]