// Sources flattened with hardhat v2.13.1 https://hardhat.org

// File @openzeppelin/contracts/utils/Context.sol@v4.8.3

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @limitbreak/creator-token-standards/src/access/OwnablePermissions.sol@v3.0.0


pragma solidity ^0.8.4;

abstract contract OwnablePermissions is Context {
    function _requireCallerIsContractOwner() internal view virtual;
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.8.3


// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @limitbreak/creator-token-standards/src/access/OwnableBasic.sol@v3.0.0



pragma solidity ^0.8.4;


abstract contract OwnableBasic is OwnablePermissions, Ownable {
    function _requireCallerIsContractOwner() internal view virtual override {
        _checkOwner();
    }
}


// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.8.3


// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC1155/IERC1155.sol@v4.8.3


// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}


// File @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol@v4.8.3


// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}


// File @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol@v4.8.3


// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}


// File @openzeppelin/contracts/utils/Address.sol@v4.8.3


// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File @openzeppelin/contracts/utils/introspection/ERC165.sol@v4.8.3


// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


// File @openzeppelin/contracts/token/ERC1155/ERC1155.sol@v4.8.3


// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;






/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}


// File @limitbreak/creator-token-standards/src/token/erc1155/ERC1155OpenZeppelin.sol@v3.0.0



pragma solidity ^0.8.4;


abstract contract ERC1155OpenZeppelinBase is ERC1155 {

}

abstract contract ERC1155OpenZeppelin is ERC1155OpenZeppelinBase {
    constructor(string memory uri_) ERC1155(uri_) {}
}

abstract contract ERC1155OpenZeppelinInitializable is OwnablePermissions, ERC1155OpenZeppelinBase {

    error ERC1155OpenZeppelinInitializable__AlreadyInitializedERC1155();

    bool private _erc1155Initialized;

    function initializeERC1155(string memory uri_) public virtual {
        _requireCallerIsContractOwner();

        if(_erc1155Initialized) {
            revert ERC1155OpenZeppelinInitializable__AlreadyInitializedERC1155();
        }

        _erc1155Initialized = true;

        _setURI(uri_);
    }
}


// File @limitbreak/creator-token-standards/src/utils/AutomaticValidatorTransferApproval.sol@v3.0.0


pragma solidity ^0.8.4;

/**
 * @title AutomaticValidatorTransferApproval
 * @author Limit Break, Inc.
 * @notice Base contract mix-in that provides boilerplate code giving the contract owner the
 *         option to automatically approve a 721-C transfer validator implementation for transfers.
 */
abstract contract AutomaticValidatorTransferApproval is OwnablePermissions {

    /// @dev Emitted when the automatic approval flag is modified by the creator.
    event AutomaticApprovalOfTransferValidatorSet(bool autoApproved);

    /// @dev If true, the collection's transfer validator is automatically approved to transfer holder's tokens.
    bool public autoApproveTransfersFromValidator;

    /**
     * @notice Sets if the transfer validator is automatically approved as an operator for all token owners.
     * 
     * @dev    Throws when the caller is not the contract owner.
     * 
     * @param autoApprove If true, the collection's transfer validator will be automatically approved to
     *                    transfer holder's tokens.
     */
    function setAutomaticApprovalOfTransfersFromValidator(bool autoApprove) external {
        _requireCallerIsContractOwner();
        autoApproveTransfersFromValidator = autoApprove;
        emit AutomaticApprovalOfTransferValidatorSet(autoApprove);
    }
}


// File @limitbreak/creator-token-standards/src/interfaces/ICreatorToken.sol@v3.0.0


pragma solidity ^0.8.4;

interface ICreatorToken {
    event TransferValidatorUpdated(address oldValidator, address newValidator);
    function getTransferValidator() external view returns (address validator);
    function setTransferValidator(address validator) external;
    function getTransferValidationFunction() external view returns (bytes4 functionSignature, bool isViewFunction);
}


// File @limitbreak/creator-token-standards/src/interfaces/ICreatorTokenLegacy.sol@v3.0.0


pragma solidity ^0.8.4;

interface ICreatorTokenLegacy {
    event TransferValidatorUpdated(address oldValidator, address newValidator);
    function getTransferValidator() external view returns (address validator);
    function setTransferValidator(address validator) external;
}


// File @limitbreak/creator-token-standards/src/interfaces/ITransferValidator.sol@v3.0.0


pragma solidity ^0.8.4;

interface ITransferValidator {
    function applyCollectionTransferPolicy(address caller, address from, address to) external view;
    function validateTransfer(address caller, address from, address to) external view;
    function validateTransfer(address caller, address from, address to, uint256 tokenId) external view;
    function validateTransfer(address caller, address from, address to, uint256 tokenId, uint256 amount) external;

    function beforeAuthorizedTransfer(address operator, address token, uint256 tokenId) external;
    function afterAuthorizedTransfer(address token, uint256 tokenId) external;
    function beforeAuthorizedTransfer(address operator, address token) external;
    function afterAuthorizedTransfer(address token) external;
    function beforeAuthorizedTransfer(address token, uint256 tokenId) external;
    function beforeAuthorizedTransferWithAmount(address token, uint256 tokenId, uint256 amount) external;
    function afterAuthorizedTransferWithAmount(address token, uint256 tokenId) external;
}


// File @limitbreak/creator-token-standards/src/interfaces/ITransferValidatorSetTokenType.sol@v3.0.0


pragma solidity ^0.8.4;

interface ITransferValidatorSetTokenType {
    function setTokenTypeOfCollection(address collection, uint16 tokenType) external;
}


// File @limitbreak/creator-token-standards/src/utils/TransferValidation.sol@v3.0.0


pragma solidity ^0.8.4;

/**
 * @title TransferValidation
 * @author Limit Break, Inc.
 * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks.
 * Openzeppelin's ERC721 contract only provides hooks for before and after transfer.  This allows
 * developers to validate or customize transfers within the context of a mint, a burn, or a transfer.
 */
abstract contract TransferValidation is Context {
    
    /// @dev Thrown when the from and to address are both the zero address.
    error ShouldNotMintToBurnAddress();

    /*************************************************************************/
    /*                      Transfers Without Amounts                        */
    /*************************************************************************/

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /*************************************************************************/
    /*                         Transfers With Amounts                        */
    /*************************************************************************/

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId, uint256 amount) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, amount, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, amount, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, amount, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId, uint256 amount) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, amount, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, amount, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, amount, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 amount, uint256 value) internal virtual {}
}


// File @limitbreak/creator-token-standards/src/utils/CreatorTokenBase.sol@v3.0.0


pragma solidity ^0.8.4;






/**
 * @title CreatorTokenBase
 * @author Limit Break, Inc.
 * @notice CreatorTokenBaseV3 is an abstract contract that provides basic functionality for managing token 
 * transfer policies through an implementation of ICreatorTokenTransferValidator/ICreatorTokenTransferValidatorV2/ICreatorTokenTransferValidatorV3. 
 * This contract is intended to be used as a base for creator-specific token contracts, enabling customizable transfer 
 * restrictions and security policies.
 *
 * <h4>Features:</h4>
 * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul>
 * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul>
 *
 * <h4>Benefits:</h4>
 * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul>
 * <ul>Allows creators to enforce policies such as account and codehash blacklists, whitelists, and graylists.</ul>
 * <ul>Can be easily integrated into other token contracts as a base contract.</ul>
 *
 * <h4>Intended Usage:</h4>
 * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and 
 *   security policies.</ul>
 * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the 
 *   creator token.</ul>
 *
 * <h4>Compatibility:</h4>
 * <ul>Backward and Forward Compatible - V1/V2/V3 Creator Token Base will work with V1/V2/V3 Transfer Validators.</ul>
 */
abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken {

    /// @dev Thrown when setting a transfer validator address that has no deployed code.
    error CreatorTokenBase__InvalidTransferValidatorContract();

    /// @dev The default transfer validator that will be used if no transfer validator has been set by the creator.
    address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x721C0078c2328597Ca70F5451ffF5A7B38D4E947);

    /// @dev Used to determine if the default transfer validator is applied.
    /// @dev Set to true when the creator sets a transfer validator address.
    bool private isValidatorInitialized;
    /// @dev Address of the transfer validator to apply to transactions.
    address private transferValidator;

    constructor() {
        _emitDefaultTransferValidator();
        _registerTokenType(DEFAULT_TRANSFER_VALIDATOR);
    }

    /**
     * @notice Sets the transfer validator for the token contract.
     *
     * @dev    Throws when provided validator contract is not the zero address and does not have code.
     * @dev    Throws when the caller is not the contract owner.
     *
     * @dev    <h4>Postconditions:</h4>
     *         1. The transferValidator address is updated.
     *         2. The `TransferValidatorUpdated` event is emitted.
     *
     * @param transferValidator_ The address of the transfer validator contract.
     */
    function setTransferValidator(address transferValidator_) public {
        _requireCallerIsContractOwner();

        bool isValidTransferValidator = transferValidator_.code.length > 0;

        if(transferValidator_ != address(0) && !isValidTransferValidator) {
            revert CreatorTokenBase__InvalidTransferValidatorContract();
        }

        emit TransferValidatorUpdated(address(getTransferValidator()), transferValidator_);

        isValidatorInitialized = true;
        transferValidator = transferValidator_;

        _registerTokenType(transferValidator_);
    }

    /**
     * @notice Returns the transfer validator contract address for this token contract.
     */
    function getTransferValidator() public view override returns (address validator) {
        validator = transferValidator;

        if (validator == address(0)) {
            if (!isValidatorInitialized) {
                validator = DEFAULT_TRANSFER_VALIDATOR;
            }
        }
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Be aware that if the msg.sender is the transfer validator, the transfer is automatically permitted, as the
     *      transfer validator is expected to pre-validate the transfer.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     * @param tokenId The token id being transferred.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 tokenId, 
        uint256 /*value*/) internal virtual override {
        address validator = getTransferValidator();

        if (validator != address(0)) {
            if (msg.sender == validator) {
                return;
            }

            ITransferValidator(validator).validateTransfer(caller, from, to, tokenId);
        }
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Be aware that if the msg.sender is the transfer validator, the transfer is automatically permitted, as the
     *      transfer validator is expected to pre-validate the transfer.
     * 
     * @dev Used for ERC20 and ERC1155 token transfers which have an amount value to validate in the transfer validator.
     * @dev The `tokenId` for ERC20 tokens should be set to `0`.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     * @param tokenId The token id being transferred.
     * @param amount  The amount of token being transferred.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 tokenId, 
        uint256 amount,
        uint256 /*value*/) internal virtual override {
        address validator = getTransferValidator();

        if (validator != address(0)) {
            if (msg.sender == validator) {
                return;
            }

            ITransferValidator(validator).validateTransfer(caller, from, to, tokenId, amount);
        }
    }

    function _tokenType() internal virtual pure returns(uint16);

    function _registerTokenType(address validator) internal {
        if (validator != address(0)) {
            uint256 validatorCodeSize;
            assembly {
                validatorCodeSize := extcodesize(validator)
            }
            if(validatorCodeSize > 0) {
                try ITransferValidatorSetTokenType(validator).setTokenTypeOfCollection(address(this), _tokenType()) {
                } catch { }
            }
        }
    }

    /**
     * @dev  Used during contract deployment for constructable and cloneable creator tokens
     * @dev  to emit the `TransferValidatorUpdated` event signaling the validator for the contract
     * @dev  is the default transfer validator.
     */
    function _emitDefaultTransferValidator() internal {
        emit TransferValidatorUpdated(address(0), DEFAULT_TRANSFER_VALIDATOR);
    }
}


// File @limitbreak/permit-c/src/Constants.sol@v1.0.0


pragma solidity ^0.8.4;

/// @dev Constant bytes32 value of 0x000...000
bytes32 constant ZERO_BYTES32 = bytes32(0);

/// @dev Constant value of 0
uint256 constant ZERO = 0;
/// @dev Constant value of 1
uint256 constant ONE = 1;

/// @dev Constant value representing an open order in storage
uint8 constant ORDER_STATE_OPEN = 0;
/// @dev Constant value representing a filled order in storage
uint8 constant ORDER_STATE_FILLED = 1;
/// @dev Constant value representing a cancelled order in storage
uint8 constant ORDER_STATE_CANCELLED = 2;

/// @dev Constant value representing the ERC721 token type for signatures and transfer hooks
uint256 constant TOKEN_TYPE_ERC721 = 721;
/// @dev Constant value representing the ERC1155 token type for signatures and transfer hooks
uint256 constant TOKEN_TYPE_ERC1155 = 1155;
/// @dev Constant value representing the ERC20 token type for signatures and transfer hooks
uint256 constant TOKEN_TYPE_ERC20 = 20;

/// @dev Constant value to mask the upper bits of a signature that uses a packed `vs` value to extract `s`
bytes32 constant UPPER_BIT_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;

/// @dev EIP-712 typehash used for validating signature based stored approvals
bytes32 constant UPDATE_APPROVAL_TYPEHASH =
    keccak256("UpdateApprovalBySignature(uint256 tokenType,address token,uint256 id,uint256 amount,uint256 nonce,address operator,uint256 approvalExpiration,uint256 sigDeadline,uint256 masterNonce)");

/// @dev EIP-712 typehash used for validating a single use permit without additional data
bytes32 constant SINGLE_USE_PERMIT_TYPEHASH =
    keccak256("PermitTransferFrom(uint256 tokenType,address token,uint256 id,uint256 amount,uint256 nonce,address operator,uint256 expiration,uint256 masterNonce)");

/// @dev EIP-712 typehash used for validating a single use permit with additional data
string constant SINGLE_USE_PERMIT_TRANSFER_ADVANCED_TYPEHASH_STUB =
    "PermitTransferFromWithAdditionalData(uint256 tokenType,address token,uint256 id,uint256 amount,uint256 nonce,address operator,uint256 expiration,uint256 masterNonce,";

/// @dev EIP-712 typehash used for validating an order permit that updates storage as it fills
string constant PERMIT_ORDER_ADVANCED_TYPEHASH_STUB =
    "PermitOrderWithAdditionalData(uint256 tokenType,address token,uint256 id,uint256 amount,uint256 salt,address operator,uint256 expiration,uint256 masterNonce,";

/// @dev Pausable flag for stored approval transfers of ERC721 assets
uint256 constant PAUSABLE_APPROVAL_TRANSFER_FROM_ERC721 = 1 << 0;
/// @dev Pausable flag for stored approval transfers of ERC1155 assets
uint256 constant PAUSABLE_APPROVAL_TRANSFER_FROM_ERC1155 = 1 << 1;
/// @dev Pausable flag for stored approval transfers of ERC20 assets
uint256 constant PAUSABLE_APPROVAL_TRANSFER_FROM_ERC20 = 1 << 2;

/// @dev Pausable flag for single use permit transfers of ERC721 assets
uint256 constant PAUSABLE_PERMITTED_TRANSFER_FROM_ERC721 = 1 << 3;
/// @dev Pausable flag for single use permit transfers of ERC1155 assets
uint256 constant PAUSABLE_PERMITTED_TRANSFER_FROM_ERC1155 = 1 << 4;
/// @dev Pausable flag for single use permit transfers of ERC20 assets
uint256 constant PAUSABLE_PERMITTED_TRANSFER_FROM_ERC20 = 1 << 5;

/// @dev Pausable flag for order fill transfers of ERC1155 assets
uint256 constant PAUSABLE_ORDER_TRANSFER_FROM_ERC1155 = 1 << 6;
/// @dev Pausable flag for order fill transfers of ERC20 assets
uint256 constant PAUSABLE_ORDER_TRANSFER_FROM_ERC20 = 1 << 7;


// File @limitbreak/creator-token-standards/src/erc1155c/ERC1155C.sol@v3.0.0


pragma solidity ^0.8.4;




/**
 * @title ERC1155C
 * @author Limit Break, Inc.
 * @notice Extends OpenZeppelin's ERC1155 implementation with Creator Token functionality, which
 *         allows the contract owner to update the transfer validation logic by managing a security policy in
 *         an external transfer validation security policy registry.  See {CreatorTokenTransferValidator}.
 */
abstract contract ERC1155C is ERC1155OpenZeppelin, CreatorTokenBase, AutomaticValidatorTransferApproval {
    
    /**
     * @notice Overrides behavior of isApprovedFor all such that if an operator is not explicitly approved
     *         for all, the contract owner can optionally auto-approve the 721-C transfer validator for transfers.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool isApproved) {
        isApproved = super.isApprovedForAll(owner, operator);

        if (!isApproved) {
            if (autoApproveTransfersFromValidator) {
                isApproved = operator == address(getTransferValidator());
            }
        }
    }

    /**
     * @notice Indicates whether the contract implements the specified interface.
     * @dev Overrides supportsInterface in ERC165.
     * @param interfaceId The interface id
     * @return true if the contract implements the specified interface, false otherwise
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return 
        interfaceId == type(ICreatorToken).interfaceId || 
        interfaceId == type(ICreatorTokenLegacy).interfaceId || 
        super.supportsInterface(interfaceId);
    }

    /**
     * @notice Returns the function selector for the transfer validator's validation function to be called 
     * @notice for transaction simulation. 
     */
    function getTransferValidationFunction() external pure returns (bytes4 functionSignature, bool isViewFunction) {
        functionSignature = bytes4(keccak256("validateTransfer(address,address,address,uint256,uint256)"));
        isViewFunction = false;
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateBeforeTransfer(from, to, ids[i], amounts[i]);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateAfterTransfer(from, to, ids[i], amounts[i]);

            unchecked {
                ++i;
            }
        }
    }

    function _tokenType() internal pure override returns(uint16) {
        return uint16(TOKEN_TYPE_ERC1155);
    }
}

/**
 * @title ERC1155CInitializable
 * @author Limit Break, Inc.
 * @notice Initializable implementation of ERC1155C to allow for EIP-1167 proxy clones.
 */
abstract contract ERC1155CInitializable is ERC1155OpenZeppelinInitializable, CreatorTokenBase, AutomaticValidatorTransferApproval {

    function initializeERC1155(string memory uri_) public override {
        super.initializeERC1155(uri_);

        _emitDefaultTransferValidator();
        _registerTokenType(getTransferValidator());
    }

    /**
     * @notice Overrides behavior of isApprovedFor all such that if an operator is not explicitly approved
     *         for all, the contract owner can optionally auto-approve the 721-C transfer validator for transfers.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool isApproved) {
        isApproved = super.isApprovedForAll(owner, operator);

        if (!isApproved) {
            if (autoApproveTransfersFromValidator) {
                isApproved = operator == address(getTransferValidator());
            }
        }
    }

    /**
     * @notice Indicates whether the contract implements the specified interface.
     * @dev Overrides supportsInterface in ERC165.
     * @param interfaceId The interface id
     * @return true if the contract implements the specified interface, false otherwise
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return 
        interfaceId == type(ICreatorToken).interfaceId || 
        interfaceId == type(ICreatorTokenLegacy).interfaceId || 
        super.supportsInterface(interfaceId);
    }

    /**
     * @notice Returns the function selector for the transfer validator's validation function to be called 
     * @notice for transaction simulation. 
     */
    function getTransferValidationFunction() external pure returns (bytes4 functionSignature, bool isViewFunction) {
        functionSignature = bytes4(keccak256("validateTransfer(address,address,address,uint256,uint256)"));
        isViewFunction = false;
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateBeforeTransfer(from, to, ids[i], amounts[i]);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateAfterTransfer(from, to, ids[i], amounts[i]);

            unchecked {
                ++i;
            }
        }
    }

    function _tokenType() internal pure override returns(uint16) {
        return uint16(TOKEN_TYPE_ERC1155);
    }
}


// File contracts/cosmetics/AradenaCosmetics.sol



pragma solidity ^0.8.0;


contract AradenaCosmetics is OwnableBasic, ERC1155C {
    
  string public name;
  string public symbol;

  struct Recipient {
    address wallet;
    uint256 tokenId; 
    uint256 amount;
  }

  /**
   * @dev Mapping of addresses that are authorized to add mint new tokens.
   */
  mapping (address => bool) public authorizedAddresses;

  /**
   * @dev Only authorized addresses can call a function with this modifier.
   */
  modifier onlyAuthorized() {
    require(authorizedAddresses[msg.sender] || owner() == msg.sender, "Not authorized");
    _;
  }
  constructor(
    string memory _name,
    string memory _symbol,
    string memory _uri
  ) ERC1155OpenZeppelin(_uri) {
    name = _name;
    symbol = _symbol;
  }

  /**
   * @dev Sets or revokes authorized address.
   * @param addr Address we are setting.
   * @param isAuthorized True is setting, false if we are revoking.
   */
  function setAuthorizedAddress(address addr, bool isAuthorized)
    external
    onlyOwner()
  {
    authorizedAddresses[addr] = isAuthorized;
  }

  function mintBatch(Recipient[] memory recList) external onlyAuthorized() {
    for (uint i = 0; i < recList.length; i++) {
      Recipient memory rec = recList[i];
      _mint(rec.wallet, rec.tokenId, rec.amount, "");
    }
  }

  function setURI(string memory _uri) external onlyAuthorized() {
    _setURI(_uri);
  }

}

{
  "compilationTarget": {
    "AradenaCosmetics.sol": "AradenaCosmetics"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}