Veil

//SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;
// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// File: @openzeppelin/contracts/utils/math/SignedMath.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;



/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

////// src/IUniswapV2Pair.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */

interface IUniswapV2Pair {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    event Transfer(address indexed from, address indexed to, uint256 value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint256);

    function balanceOf(address owner) external view returns (uint256);

    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    function approve(address spender, uint256 value) external returns (bool);

    function transfer(address to, uint256 value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint256);

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(
        address indexed sender,
        uint256 amount0,
        uint256 amount1,
        address indexed to
    );
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint256);

    function factory() external view returns (address);

    function token0() external view returns (address);

    function token1() external view returns (address);

    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );

    function price0CumulativeLast() external view returns (uint256);

    function price1CumulativeLast() external view returns (uint256);

    function kLast() external view returns (uint256);

    function mint(address to) external returns (uint256 liquidity);

    function burn(address to)
        external
        returns (uint256 amount0, uint256 amount1);

    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        address to,
        bytes calldata data
    ) external;

    function skim(address to) external;

    function sync() external;

    function initialize(address, address) external;
}

////// src/IUniswapV2Router02.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */

interface IUniswapV2Router02 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// File: @openzeppelin/contracts/utils/Pausable.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;


/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/access/Ownable2Step.sol


// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;


/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// File: contracts/ERC404.sol

pragma solidity ^0.8.0;


abstract contract ERC721Receiver {
    function onERC721Received(
        address,
        address,
        uint256,
        bytes calldata
    ) external virtual returns (bytes4) {
        return ERC721Receiver.onERC721Received.selector;
    }
}

/// @notice ERC404
///         A gas-efficient, mixed ERC20 / ERC721 implementation
///         with native liquidity and fractionalization.
///
///         This is an experimental standard designed to integrate
///         with pre-existing ERC20 / ERC721 support as smoothly as
///         possible.
///
/// @dev    In order to support full functionality of ERC20 and ERC721
///         supply assumptions are made that slightly constraint usage.
///         Ensure decimals are sufficiently large (standard 18 recommended)
///         as ids are effectively encoded in the lowest range of amounts.
///
///         NFTs are spent on ERC20 functions in a FILO queue, this is by
///         design.
///
abstract contract ERC404 is Ownable2Step {
    // Events
    event ERC20Transfer(
        address indexed from,
        address indexed to,
        uint256 amount
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 amount
    );
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 indexed id
    );
    event ERC721Approval(
        address indexed owner,
        address indexed spender,
        uint256 indexed id
    );
    event ApprovalForAll(
        address indexed owner,
        address indexed operator,
        bool approved
    );

    // Errors
    error NotFound();
    error AlreadyExists();
    error InvalidRecipient();
    error InvalidSender();
    error UnsafeRecipient();
    error Unauthorized();
    error InvalidOwner();

    // Metadata
    /// @dev Token name
    string public name;

    /// @dev Token symbol
    string public symbol;

    /// @dev Decimals for fractional representation
    uint8 public immutable decimals;

    /// @dev Total supply in fractionalized representation
    uint256 public immutable totalSupply;

    /// @dev Current mint counter, monotonically increasing to ensure accurate ownership
    uint256 public minted;

    // Mappings
    /// @dev Balance of user in fractional representation
    mapping(address => uint256) public balanceOf;

    /// @dev Allowance of user in fractional representation
    mapping(address => mapping(address => uint256)) public allowance;

    /// @dev Approval in native representaion
    mapping(uint256 => address) public getApproved;

    /// @dev Approval for all in native representation
    mapping(address => mapping(address => bool)) public isApprovedForAll;

    /// @dev Owner of id in native representation
    mapping(uint256 => address) internal _ownerOf;

    /// @dev Array of owned ids in native representation
    mapping(address => uint256[]) internal _owned;

    /// @dev Tracks indices for the _owned mapping
    mapping(uint256 => uint256) internal _ownedIndex;

    /// @dev Addresses whitelisted from minting / burning for gas savings (pairs, routers, etc)
    mapping(address => bool) public whitelist;



    // Constructor
    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals,
        uint256 _totalNativeSupply,
        address _owner
    ) Ownable(_owner) {
          name = _name;
        symbol = _symbol;
        decimals = _decimals;
        totalSupply = _totalNativeSupply * (10 ** decimals);
    }

    /// @notice Initialization function to set pairs / etc
    ///         saving gas by avoiding mint / burn on unnecessary targets
    function setWhitelist(address target, bool state) public onlyOwner {
        whitelist[target] = state;
    }

    /// @notice Function to find owner of a given native token
    function ownerOf(uint256 id) public view virtual returns (address owner) {
        owner = _ownerOf[id];

        if (owner == address(0)) {
            revert NotFound();
        }
    }

    /// @notice tokenURI must be implemented by child contract
    function tokenURI(uint256 id) public view virtual returns (string memory);

    /// @notice Function for token approvals
    /// @dev This function assumes id / native if amount less than or equal to current max id
    function approve(
        address spender,
        uint256 amountOrId
    ) public virtual returns (bool) {
        if (amountOrId <= minted && amountOrId > 0) {
            address owner = _ownerOf[amountOrId];

            if (msg.sender != owner && !isApprovedForAll[owner][msg.sender]) {
                revert Unauthorized();
            }

            getApproved[amountOrId] = spender;

            emit Approval(owner, spender, amountOrId);
        } else {
            allowance[msg.sender][spender] = amountOrId;

            emit Approval(msg.sender, spender, amountOrId);
        }

        return true;
    }

        function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        allowance[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }


    /// @notice Function native approvals
    function setApprovalForAll(address operator, bool approved) public virtual {
        isApprovedForAll[msg.sender][operator] = approved;

        emit ApprovalForAll(msg.sender, operator, approved);
    }

    /// @notice Function for mixed transfers
    /// @dev This function assumes id / native if amount less than or equal to current max id
    function transferFrom(
        address from,
        address to,
        uint256 amountOrId
    ) public virtual {
        if (amountOrId <= minted) {
            if (from != _ownerOf[amountOrId]) {
                revert InvalidSender();
            }

            if (to == address(0)) {
                revert InvalidRecipient();
            }

            if (
                msg.sender != from &&
                !isApprovedForAll[from][msg.sender] &&
                msg.sender != getApproved[amountOrId]
            ) {
                revert Unauthorized();
            }

            balanceOf[from] -= _getUnit();

            unchecked {
                balanceOf[to] += _getUnit();
            }

            _ownerOf[amountOrId] = to;
            delete getApproved[amountOrId];

            // update _owned for sender
            uint256 updatedId = _owned[from][_owned[from].length - 1];
            _owned[from][_ownedIndex[amountOrId]] = updatedId;
            // pop
            _owned[from].pop();
            // update index for the moved id
            _ownedIndex[updatedId] = _ownedIndex[amountOrId];
            // push token to to owned
            _owned[to].push(amountOrId);
            // update index for to owned
            _ownedIndex[amountOrId] = _owned[to].length - 1;

            emit Transfer(from, to, amountOrId);
            emit ERC20Transfer(from, to, _getUnit());
        } else {
            uint256 allowed = allowance[from][msg.sender];

            if (allowed != type(uint256).max)
                allowance[from][msg.sender] = allowed - amountOrId;

            _transfer(from, to, amountOrId);
        }
    }

    /// @notice Function for fractional transfers
    function transfer(
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        return _transfer(msg.sender, to, amount);
    }

    /// @notice Function for native transfers with contract support
    function safeTransferFrom(
        address from,
        address to,
        uint256 id
    ) public virtual {
        transferFrom(from, to, id);

        if (
            to.code.length != 0 &&
            ERC721Receiver(to).onERC721Received(msg.sender, from, id, "") !=
            ERC721Receiver.onERC721Received.selector
        ) {
            revert UnsafeRecipient();
        }
    }

    /// @notice Function for native transfers with contract support and callback data
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        bytes calldata data
    ) public virtual {
        transferFrom(from, to, id);

        if (
            to.code.length != 0 &&
            ERC721Receiver(to).onERC721Received(msg.sender, from, id, data) !=
            ERC721Receiver.onERC721Received.selector
        ) {
            revert UnsafeRecipient();
        }
    }

    /// @notice Internal function for fractional transfers
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual returns (bool) {
        uint256 unit = _getUnit();
        uint256 balanceBeforeSender = balanceOf[from];
        uint256 balanceBeforeReceiver = balanceOf[to];

        balanceOf[from] -= amount;

        unchecked {
            balanceOf[to] += amount;
        }

        // Skip burn for certain addresses to save gas
        if (!whitelist[from]) {
            uint256 tokens_to_burn = (balanceBeforeSender / unit) -
                (balanceOf[from] / unit);
            for (uint256 i = 0; i < tokens_to_burn; i++) {
                _burn(from);
            }
        }

        // Skip minting for certain addresses to save gas
        if (!whitelist[to]) {
            uint256 tokens_to_mint = (balanceOf[to] / unit) -
                (balanceBeforeReceiver / unit);
            for (uint256 i = 0; i < tokens_to_mint; i++) {
                _mint(to);
            }
        }

        emit ERC20Transfer(from, to, amount);
        return true;
    }

    // Internal utility logic
    function _getUnit() internal view returns (uint256) {
        return 10 ** decimals;
    }

    function _mint(address to) internal virtual {
        if (to == address(0)) {
            revert InvalidRecipient();
        }

        unchecked {
            minted++;
        }

        uint256 id = minted;

        if (_ownerOf[id] != address(0)) {
            revert AlreadyExists();
        }

        _ownerOf[id] = to;
        _owned[to].push(id);
        _ownedIndex[id] = _owned[to].length - 1;

        emit Transfer(address(0), to, id);
    }

    function _burn(address from) internal virtual {
        if (from == address(0)) {
            revert InvalidSender();
        }

        uint256 id = _owned[from][_owned[from].length - 1];
        _owned[from].pop();
        delete _ownedIndex[id];
        delete _ownerOf[id];
        delete getApproved[id];

        emit Transfer(from, address(0), id);
    }

    function _setNameSymbol(
        string memory _name,
        string memory _symbol
    ) internal {
        name = _name;
        symbol = _symbol;
    }
}







contract Veil is ERC404, Pausable, ReentrancyGuard {
    string public baseTokenURI;
    using Strings for uint256;
    bool public applyTxLimit;


    IUniswapV2Router02 public immutable uniswapV2Router;
    address public immutable uniswapV2Pair;
    address public constant deadAddress = address(0xdead);

    bool private swapping;

    address public marketingWallet;
    mapping(uint256 => uint256) private swapInBlock;

    uint256 public maxTransactionAmount;
    uint256 public swapTokensAtAmount;
    uint256 public maxWallet;

    bool public limitsInEffect = true;
    bool public tradingActive = false;
    bool public swapEnabled = false;
    bool public revealNFT = false;


    uint256 public buyTotalFees;
    uint256 private buyMarketingFee;

    uint256 public sellTotalFees;
    uint256 private sellMarketingFee;

    uint256 private tokensForMarketing;


    // exlcude from fees and max transaction amount
    mapping(address => bool) private _isExcludedFromFees;
    mapping(address => bool) public _isExcludedMaxTransactionAmount;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping(address => bool) public automatedMarketMakerPairs;

    constructor(
        address _owner,
        uint256 _initialSupply,
        uint8 _decimal,
        address _wallet1
    ) ERC404("Veil", "Veil 404", _decimal, _initialSupply, _owner) {
        balanceOf[_owner] = _initialSupply * 10 ** _decimal;

        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);

            excludeFromMaxTransaction(address(_uniswapV2Router), true);
            uniswapV2Router = _uniswapV2Router;

            uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
                .createPair(address(this), _uniswapV2Router.WETH());
            excludeFromMaxTransaction(address(uniswapV2Pair), true);
            _setAutomatedMarketMakerPair(address(uniswapV2Pair), true);

            maxTransactionAmount = 300 * 1e18;
            maxWallet = 300 * 1e18;
            swapTokensAtAmount = 2 * 1e18;

            buyMarketingFee = 15;
            buyTotalFees = buyMarketingFee;

            sellMarketingFee = 15;
            sellTotalFees = sellMarketingFee;

            marketingWallet = _wallet1; // set as marketing wallet

            // exclude from paying fees or having max transaction amount
            excludeFromFees(owner(), true);
            excludeFromFees(address(this), true);
            excludeFromFees(address(0xdead), true);

            excludeFromMaxTransaction(owner(), true);
            excludeFromMaxTransaction(address(this), true);
            excludeFromMaxTransaction(address(0xdead), true);
    }
        receive() external payable {}

        // remove limits after token is stable
          function removeLimits() external onlyOwner returns (bool) {
              limitsInEffect = false;
              return true;
          }

              function OpenVeil(uint256 openingFee) external onlyOwner {
        buyMarketingFee = openingFee;
        buyTotalFees = buyMarketingFee;
        sellMarketingFee = openingFee;
        sellTotalFees = sellMarketingFee;
        tradingActive = true;
        swapEnabled = true;
    }


          // change the minimum amount of tokens to sell from fees
          function updateSwapTokensAtAmount(uint256 newAmount)
              external
              onlyOwner
              returns (bool)
          {
              swapTokensAtAmount = newAmount;
              return true;
          }

          function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
    require(
        newNum >= ((totalSupply * 1) / 1000) / 1e18,
        "Cannot set maxTransactionAmount lower than 0.1%"
    );
    maxTransactionAmount = newNum * (10**18);
}

function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
    require(
        newNum >= ((totalSupply * 5) / 1000) / 1e18,
        "Cannot set maxWallet lower than 0.5%"
    );
    maxWallet = newNum * (10**18);
}

function excludeFromMaxTransaction(address updAds, bool isEx)
    public
    onlyOwner
{
    _isExcludedMaxTransactionAmount[updAds] = isEx;
}

function updateBuyFees(
      uint256 _marketingFee
  ) external onlyOwner {
      buyMarketingFee = _marketingFee;
      buyTotalFees = buyMarketingFee;
      require(buyTotalFees <= 50, "Must keep fees at 30% or less");
  }

  function updateSellFees(
      uint256 _marketingFee
  ) external onlyOwner {
      sellMarketingFee = _marketingFee;
      sellTotalFees = sellMarketingFee;
      require(sellTotalFees <= 50, "Must keep fees at 30% or less");
  }

  function excludeFromFees(address account, bool excluded) public onlyOwner {
    _isExcludedFromFees[account] = excluded;

}

function manualswap(uint256 amount) external {
      require(_msgSender() == marketingWallet);
        swapTokensForEth(amount * (10 ** decimals));
    }

  function manualsend() external {
    bool success;
    (success, ) = address(marketingWallet).call{
        value: address(this).balance
    }("");
}

function setAutomatedMarketMakerPair(address pair, bool value)
    public
    onlyOwner
{
    require(
        pair != uniswapV2Pair,
        "The pair cannot be removed from automatedMarketMakerPairs"
    );

    _setAutomatedMarketMakerPair(pair, value);
}

function _setAutomatedMarketMakerPair(address pair, bool value) private {
    automatedMarketMakerPairs[pair] = value;

}

function updateMarketingWallet(address newMarketingWallet)
      external
      onlyOwner
  {
      marketingWallet = newMarketingWallet;
  }


    function _mint(
        address to
    ) internal override whenNotPaused{
        return super._mint(to);
    }

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal override virtual whenNotPaused returns (bool){
      require(from != address(0), "ERC20: transfer from the zero address");
          require(to != address(0), "ERC20: transfer to the zero address");

          uint256 blockNum = block.number;

          if (amount == 0) {
             return super._transfer(from, to, 0);
          }

          if (limitsInEffect) {
              if (
                  from != owner() &&
                  to != owner() &&
                  to != address(0) &&
                  to != address(0xdead) &&
                  !swapping
              ) {
                  if (!tradingActive) {
                      require(
                          _isExcludedFromFees[from] || _isExcludedFromFees[to],
                          "Trading is not active."
                      );
                  }

                  //when buy
                  if (
                      automatedMarketMakerPairs[from] &&
                      !_isExcludedMaxTransactionAmount[to]
                  ) {
                      require(
                          amount <= maxTransactionAmount,
                          "Buy transfer amount exceeds the maxTransactionAmount."
                      );
                      require(
                          amount + balanceOf[to] <= maxWallet,
                          "Max wallet exceeded"
                      );
                  }
                  //when sell
                  else if (
                      automatedMarketMakerPairs[to] &&
                      !_isExcludedMaxTransactionAmount[from]
                  ) {
                      require(
                          amount <= maxTransactionAmount,
                          "Sell transfer amount exceeds the maxTransactionAmount."
                      );
                  } else if (!_isExcludedMaxTransactionAmount[to]) {
                      require(
                          amount + balanceOf[to] <= maxWallet,
                          "Max wallet exceeded"
                      );
                  }
              }
          }

          uint256 contractTokenBalance = balanceOf[address(this)];

          bool canSwap = contractTokenBalance >= swapTokensAtAmount;

          if (
              canSwap &&
              swapEnabled &&
              !swapping &&
              !automatedMarketMakerPairs[from] &&
              !_isExcludedFromFees[from] &&
              (swapInBlock[blockNum] < 3) &&
              !_isExcludedFromFees[to]
          ) {
              swapping = true;

              swapBack();

              ++swapInBlock[blockNum];

              swapping = false;
          }

          bool takeFee = !swapping;

          // if any account belongs to _isExcludedFromFee account then remove the fee
          if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
              takeFee = false;
          }

          uint256 fees = 0;
          // only take fees on buys/sells, do not take on wallet transfers
          if (takeFee) {
              // on sell
              if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
                  fees = amount * (sellTotalFees) / (100);
                  tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
              }
              // on buy
              else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
                  fees = amount * (buyTotalFees) / (100);
                  tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
              }

              if (fees > 0) {
                  super._transfer(from, address(this), fees);
              }

              amount -= fees;
          }

          return super._transfer(from, to, amount);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    function swapBack() private {
    uint256 contractBalance = balanceOf[address(this)];
    uint256 totalTokensToSwap =
        tokensForMarketing;
    bool success;

    if (contractBalance == 0 || totalTokensToSwap == 0) {
        return;
    }

    if (contractBalance > swapTokensAtAmount * 20) {
        contractBalance = swapTokensAtAmount * 20;
    }

    // Halve the amount of liquidity tokens

    uint256 amountToSwapForETH = contractBalance;

    swapTokensForEth(amountToSwapForETH);

    tokensForMarketing = 0;


    (success, ) = address(marketingWallet).call{
        value: address(this).balance
    }("");
}

    function setTokenURI(string memory _tokenURI) public onlyOwner {
        baseTokenURI = _tokenURI;
    }
    function setReveal(bool _reveal) public onlyOwner {
        revealNFT = _reveal;
    }

    function setNameSymbol(
        string memory _name,
        string memory _symbol
    ) public onlyOwner {
        _setNameSymbol(_name, _symbol);
    }

    function tokenURI(uint256 id) public view override returns (string memory) {
      if(revealNFT)
      {
        return bytes(baseTokenURI).length > 0 ? string.concat(baseTokenURI, id.toString(), ".json") : "";
      }
      else {
        id = 1;
        return bytes(baseTokenURI).length > 0 ? string.concat(baseTokenURI, id.toString(), ".json") : "";
      }
    }

    function airdrop(address[] calldata addresses, uint256[] calldata amounts) external {
      require(addresses.length > 0 && amounts.length == addresses.length);
      address from = msg.sender;

      for (uint i = 0; i < addresses.length; i++) {

        _transfer(from, addresses[i], amounts[i] * (10**18));

      }
    }
}

{
  "compilationTarget": {
    "contracts/test2.sol": "Veil"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}