MintySwap

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

contract MintySwapToken is Context, IERC20, Ownable {
  using SafeMath for uint256;
  using Address for address;

  mapping(address => uint256) private _rOwned;
  mapping(address => uint256) private _tOwned;
  mapping(address => mapping(address => uint256)) private _allowances;

  mapping(address => bool) private _isExcluded;
  address[] private _excluded;

  uint256 constant private FEE_PERCENT = 1;
  uint256 constant private BURN_PERCENT = 1;
  uint8 constant private DECIMALS = 9;
  uint256 constant private TOTAL_SUPPLY = 1 * (10 ** 9) * (10 ** DECIMALS);
  uint256 constant private MAX = ~uint256(0);

  uint256 private _rTotal = (MAX - (MAX % TOTAL_SUPPLY));
  uint256 private _tTotal = TOTAL_SUPPLY;
  uint256 private _tFeeTotal;

  constructor () {
    address sender = _msgSender();
    _rOwned[sender] = _rTotal;
    emit Transfer(address(0), sender, TOTAL_SUPPLY);
  }

  function name() public pure returns (string memory) {
    return "MintySwap";
  }

  function symbol() public pure returns (string memory) {
    return "MINTYS";
  }

  function decimals() public pure returns (uint8) {
    return DECIMALS;
  }

  function totalSupply() public view override returns (uint256) {
    return _tTotal;
  }

  function balanceOf(address account) public view override returns (uint256) {
    return isExcluded(account) ? _tOwned[account] : tokenFromReflection(_rOwned[account]);
  }

  function transfer(address recipient, uint256 amount) public override returns (bool) {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  function allowance(address owner, address spender) public view override returns (uint256) {
    return _allowances[owner][spender];
  }

  function approve(address spender, uint256 amount) public override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
    return true;
  }

  function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
    return true;
  }

  function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
    return true;
  }

  function isExcluded(address account) public view returns (bool) {
    return _isExcluded[account];
  }

  function totalFees() public view returns (uint256) {
    return _tFeeTotal;
  }

  function totalBurned() public view returns (uint256) {
    return TOTAL_SUPPLY - _tTotal;
  }

  function reflect(uint256 tAmount) public {
    address sender = _msgSender();
    require(!_isExcluded[sender], "Excluded addresses cannot call this function");

    (uint256 rAmount,,,,,,) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rTotal = _rTotal.sub(rAmount);
    _tFeeTotal = _tFeeTotal.add(tAmount);
  }

  function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns (uint256) {
    require(tAmount <= _tTotal, "Amount must be less than supply");
    (uint256 rAmount,uint256 rTransferAmount,,,,,) = _getValues(tAmount);
    return deductTransferFee ? rTransferAmount : rAmount;
  }

  function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
    require(rAmount <= _rTotal, "Amount must be less than total reflections");
    return rAmount.div(_getRate());
  }

  function excludeAccount(address account) external onlyOwner() {
    require(!_isExcluded[account], "Account is already excluded");
    if (_rOwned[account] > 0) {
      _tOwned[account] = tokenFromReflection(_rOwned[account]);
    }
    _isExcluded[account] = true;
    _excluded.push(account);
  }

  function includeAccount(address account) external onlyOwner() {
    require(_isExcluded[account], "Account is already excluded");
    for (uint256 i = 0; i < _excluded.length; i++) {
      if (_excluded[i] == account) {
        _excluded[i] = _excluded[_excluded.length - 1];
        _tOwned[account] = 0;
        _isExcluded[account] = false;
        _excluded.pop();
        break;
      }
    }
  }

  function airdrop(address recipient, uint256 amount) public onlyOwner() {
    require(amount > 0, "Invalid transfer amount");

    (uint256 rAmount,,,,,,) = _getValues(amount);
    address sender = _msgSender();
    require(rAmount <= _rOwned[sender], "Insufficient amount");

    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rAmount);
    emit Transfer(sender, recipient, amount);
  }

  function _approve(address owner, address spender, uint256 amount) private {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  function _transfer(address sender, address recipient, uint256 amount) private {
    require(sender != address(0), "ERC20: transfer from the zero address");
    require(recipient != address(0), "ERC20: transfer to the zero address");
    require(amount > 0, "Transfer amount must be greater than zero");

    if (_isExcluded[sender] && !_isExcluded[recipient]) {
      _transferFromExcluded(sender, recipient, amount);
    } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
      _transferToExcluded(sender, recipient, amount);
    } else if (_isExcluded[sender] && _isExcluded[recipient]) {
      _transferBothExcluded(sender, recipient, amount);
    } else {
      _transferStandard(sender, recipient, amount);
    }
  }

  function _transferStandard(address sender, address recipient, uint256 tAmount) private {
    (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

    _reflectFee(rFee, tFee, rBurn, tBurn);
    emit Transfer(sender, recipient, tTransferAmount);
    emit Transfer(sender, address(0), tBurn);
  }

  function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
    (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

    _reflectFee(rFee, tFee, rBurn, tBurn);
    emit Transfer(sender, recipient, tTransferAmount);
    emit Transfer(sender, address(0), tBurn);
  }

  function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
    (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
    _tOwned[sender] = _tOwned[sender].sub(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);

    _reflectFee(rFee, tFee, rBurn, tBurn);
    emit Transfer(sender, recipient, tTransferAmount);
    emit Transfer(sender, address(0), tBurn);
  }

  function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
    (,,,,uint256 tTransferAmount,,) = _getValues(tAmount);
    emit Transfer(sender, recipient, tTransferAmount);
  }

  function _reflectFee(uint256 rFee, uint256 tFee, uint256 rBurn, uint256 tBurn) private {
    _rTotal = _rTotal.sub(rFee.add(rBurn));
    _tTotal = _tTotal.sub(tBurn);
    _tFeeTotal = _tFeeTotal.add(tFee);
  }

  function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) {
    (uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getTValues(tAmount);
    (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn) = _getRValues(tAmount, tFee, tBurn, _getRate());
    return (rAmount, rTransferAmount, rFee, rBurn, tTransferAmount, tFee, tBurn);
  }

  function _getTValues(uint256 tAmount) private pure returns (uint256, uint256, uint256) {
    uint256 tFee = tAmount.div(100).mul(FEE_PERCENT);
    uint256 tBurn = tAmount.div(100).mul(BURN_PERCENT);
    uint256 tTransferAmount = tAmount.sub(tFee.add(tBurn));
    return (tTransferAmount, tFee, tBurn);
  }

  function _getRValues(uint256 tAmount, uint256 tFee, uint256 tBurn, uint256 rate) private pure returns (uint256, uint256, uint256, uint256) {
    uint256 rAmount = tAmount.mul(rate);
    uint256 rFee = tFee.mul(rate);
    uint256 rBurn = tBurn.mul(rate);
    uint256 rTransferAmount = rAmount.sub(rFee.add(rBurn));
    return (rAmount, rTransferAmount, rFee, rBurn);
  }

  function _getRate() private view returns (uint256) {
    (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
    return rSupply.div(tSupply);
  }

  function _getCurrentSupply() private view returns (uint256, uint256) {
    uint256 rSupply = _rTotal;
    uint256 tSupply = _tTotal;
    for (uint256 i = 0; i < _excluded.length; i++) {
      if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
      rSupply = rSupply.sub(_rOwned[_excluded[i]]);
      tSupply = tSupply.sub(_tOwned[_excluded[i]]);
    }
    if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
    return (rSupply, tSupply);
  }
}

{
  "compilationTarget": {
    "MintySwapToken.sol": "MintySwapToken"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}