/*
███████╗██╗░░░██╗███╗░░░██╗░██████╗░░░░██████╗░░██████╗░██╗░░░░██╗███████╗██████╗░███████╗██████╗░
██╔════╝╚██╗░██╔╝████╗░░██║██╔════╝░░░░██╔══██╗██╔═══██╗██║░░░░██║██╔════╝██╔══██╗██╔════╝██╔══██╗
███████╗░╚████╔╝░██╔██╗░██║██║░░░░░░░░░██████╔╝██║░░░██║██║░█╗░██║█████╗░░██████╔╝█████╗░░██║░░██║
╚════██║░░╚██╔╝░░██║╚██╗██║██║░░░░░░░░░██╔═══╝░██║░░░██║██║███╗██║██╔══╝░░██╔══██╗██╔══╝░░██║░░██║
███████║░░░██║░░░██║░╚████║╚██████╗░░░░██║░░░░░╚██████╔╝╚███╔███╔╝███████╗██║░░██║███████╗██████╔╝
╚══════╝░░░╚═╝░░░╚═╝░░╚═══╝░╚═════╝░░░░╚═╝░░░░░░╚═════╝░░╚══╝╚══╝░╚══════╝╚═╝░░╚═╝╚══════╝╚═════╝░
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
░██████╗██████╗░██╗░░░██╗██████╗░████████╗░██████╗░██████╗░░██████╗░███╗░░░██╗██████╗░███████╗░░░░
██╔════╝██╔══██╗╚██╗░██╔╝██╔══██╗╚══██╔══╝██╔═══██╗██╔══██╗██╔═══██╗████╗░░██║██╔══██╗██╔════╝░░░░
██║░░░░░██████╔╝░╚████╔╝░██████╔╝░░░██║░░░██║░░░██║██████╔╝██║░░░██║██╔██╗░██║██║░░██║███████╗░░░░
██║░░░░░██╔══██╗░░╚██╔╝░░██╔═══╝░░░░██║░░░██║░░░██║██╔══██╗██║░░░██║██║╚██╗██║██║░░██║╚════██║░░░░
╚██████╗██║░░██║░░░██║░░░██║░░░░░░░░██║░░░╚██████╔╝██████╔╝╚██████╔╝██║░╚████║██████╔╝███████║░░░░
░╚═════╝╚═╝░░╚═╝░░░╚═╝░░░╚═╝░░░░░░░░╚═╝░░░░╚═════╝░╚═════╝░░╚═════╝░╚═╝░░╚═══╝╚═════╝░╚══════╝░░░░
*/

pragma solidity ^0.6.0;


interface ApproveAndCallFallBack {
    function receiveApproval(address from, uint256 tokens, address token, bytes calldata data) external;
}



/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}





/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}









/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}



contract Sync is IERC20, Ownable {
  using SafeMath for uint256;

  mapping (address => uint256) private balances;
  mapping (address => mapping (address => uint256)) private allowed;
  string public constant name  = "SYNC";
  string public constant symbol = "SYNC";
  uint8 public constant decimals = 18;
  uint256 _totalSupply = 16000000 * (10 ** 18); // 16 million supply

  mapping (address => bool) public mintContracts;

  modifier isMintContract() {
    require(mintContracts[msg.sender],"calling address is not allowed to mint");
    _;
  }

  constructor() public Ownable(){
    balances[msg.sender] = _totalSupply;
    emit Transfer(address(0), msg.sender, _totalSupply);
  }

  function setMintAccess(address account, bool canMint) public onlyOwner {
    mintContracts[account]=canMint;
  }

  function _mint(address account, uint256 amount) public isMintContract {
    require(account != address(0), "ERC20: mint to the zero address");
    _totalSupply = _totalSupply.add(amount);
    balances[account] = balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  function totalSupply() public view override returns (uint256) {
    return _totalSupply;
  }

  function balanceOf(address user) public view override returns (uint256) {
    return balances[user];
  }

  function allowance(address user, address spender) public view override returns (uint256) {
    return allowed[user][spender];
  }

  function transfer(address to, uint256 value) public override returns (bool) {
    require(value <= balances[msg.sender],"insufficient balance");
    require(to != address(0),"cannot send to zero address");

    balances[msg.sender] = balances[msg.sender].sub(value);
    balances[to] = balances[to].add(value);

    emit Transfer(msg.sender, to, value);
    return true;
  }

  function approve(address spender, uint256 value) public override returns (bool) {
    require(spender != address(0),"cannot approve the zero address");
    allowed[msg.sender][spender] = value;
    emit Approval(msg.sender, spender, value);
    return true;
  }

  function approveAndCall(address spender, uint256 tokens, bytes calldata data) external returns (bool) {
        allowed[msg.sender][spender] = tokens;
        emit Approval(msg.sender, spender, tokens);
        ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
        return true;
    }

  function transferFrom(address from, address to, uint256 value) public override returns (bool) {
    require(value <= balances[from],"insufficient balance");
    require(value <= allowed[from][msg.sender],"insufficient allowance");
    require(to != address(0),"cannot send to the zero address");

    balances[from] = balances[from].sub(value);
    balances[to] = balances[to].add(value);

    allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);

    emit Transfer(from, to, value);
    return true;
  }

  function burn(uint256 amount) external {
    require(amount != 0,"must burn more than zero");
    require(amount <= balances[msg.sender],"insufficient balance");
    _totalSupply = _totalSupply.sub(amount);
    balances[msg.sender] = balances[msg.sender].sub(amount);
    emit Transfer(msg.sender, address(0), amount);
  }

}

{
  "compilationTarget": {
    "Sync.sol": "Sync"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}