// File: @openzeppelin\contracts\token\ERC20\IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: contracts\standalone\IERC20NFTWrapper.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;


interface IERC20NFTWrapper is IERC20 {
    function init(uint256 objectId) external;

    function mainWrapper() external view returns (address);

    function objectId() external view returns (uint256);

    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function decimals() external view returns (uint256);

    function mint(address owner, uint256 amount) external;

    function burn(address owner, uint256 amount) external;
}

// File: contracts\standalone\voting\IDFOERC20NFTWrapper.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;


interface IDFOERC20NFTWrapper is IERC20NFTWrapper {
    function mint(uint256 amount) external;
    function getProxy() external view returns (address);
    function setProxy() external;
}

interface IMVDFunctionalityProposalManager {
    function isValidProposal(address proposal) external view returns (bool);
}

// File: node_modules\@openzeppelin\contracts\introspection\IERC165.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin\contracts\token\ERC1155\IERC1155.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.2;


/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transfered from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}

// File: @openzeppelin\contracts\token\ERC1155\IERC1155Receiver.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;


/**
 * _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {

    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    )
        external
        returns(bytes4);

    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    )
        external
        returns(bytes4);
}

// File: contracts\standalone\IERC1155Views.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @title IERC1155Views - An optional utility interface to improve the ERC-1155 Standard.
 * @dev This interface introduces some additional capabilities for ERC-1155 Tokens.
 */
interface IERC1155Views {

    /**
     * @dev Returns the total supply of the given token id
     * @param objectId the id of the token whose availability you want to know 
     */
    function totalSupply(uint256 objectId) external view returns (uint256);

    /**
     * @dev Returns the name of the given token id
     * @param objectId the id of the token whose name you want to know 
     */
    function name(uint256 objectId) external view returns (string memory);

    /**
     * @dev Returns the symbol of the given token id
     * @param objectId the id of the token whose symbol you want to know 
     */
    function symbol(uint256 objectId) external view returns (string memory);

    /**
     * @dev Returns the decimals of the given token id
     * @param objectId the id of the token whose decimals you want to know 
     */
    function decimals(uint256 objectId) external view returns (uint256);

    /**
     * @dev Returns the uri of the given token id
     * @param objectId the id of the token whose uri you want to know 
     */
    function uri(uint256 objectId) external view returns (string memory);
}

// File: contracts\standalone\IERC1155Data.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;

interface IERC1155Data {
    function name() external view returns (string memory);

    function symbol() external view returns (string memory);
}

// File: contracts\standalone\ISuperSaiyanToken.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;






interface ISuperSaiyanToken is IERC1155, IERC1155Receiver, IERC1155Views, IERC1155Data {
    function init(
        address model,
        address source,
        string calldata name,
        string calldata symbol
    ) external;

    function fromDecimals(uint256 objectId, uint256 amount)
        external
        view
        returns (uint256);

    function toDecimals(uint256 objectId, uint256 amount)
        external
        view
        returns (uint256);

    function getMintData(uint256 objectId)
        external
        view
        returns (
            string memory,
            string memory,
            uint256
        );

    function getModel() external view returns (address);

    function source() external view returns (address);

    function asERC20(uint256 objectId) external view returns (IERC20NFTWrapper);

    function emitTransferSingleEvent(address sender, address from, address to, uint256 objectId, uint256 amount) external;

    function mint(uint256 amount, string calldata partialUri)
        external
        returns (uint256, address);

    function burn(
        uint256 objectId,
        uint256 amount,
        bytes calldata data
    ) external;

    function burnBatch(
        uint256[] calldata objectIds,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;

    event Mint(uint256 objectId, address tokenAddress);
}

// File: contracts\standalone\voting\IDFOSuperSaiyanToken.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;


interface IDFOSuperSaiyanToken is ISuperSaiyanToken {

    function doubleProxy() external view returns(address);
    function setDoubleProxy(address newDoubleProxy) external;
    function setUri(uint256 objectId, string calldata uri) external;

    event UriChanged(uint256 indexed objectId, string oldUri, string newUri);
}

interface IDoubleProxy {
    function proxy() external view returns(address);
}

interface IMVDProxy {
    function getToken() external view returns(address);
    function getStateHolderAddress() external view returns(address);
    function getMVDWalletAddress() external view returns(address);
    function getMVDFunctionalitiesManagerAddress() external view returns(address);
    function getMVDFunctionalityProposalManagerAddress() external view returns(address);
    function submit(string calldata codeName, bytes calldata data) external payable returns(bytes memory returnData);
}

interface IStateHolder {
    function setUint256(string calldata name, uint256 value) external returns(uint256);
    function getUint256(string calldata name) external view returns(uint256);
    function getBool(string calldata varName) external view returns (bool);
    function clear(string calldata varName) external returns(string memory oldDataType, bytes memory oldVal);
}

interface IMVDFunctionalitiesManager {
    function isAuthorizedFunctionality(address functionality) external view returns(bool);
}

// File: @openzeppelin\contracts\GSN\Context.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin\contracts\math\SafeMath.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\utils\Address.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: contracts\standalone\ERC20NFTWrapper.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;






contract ERC20NFTWrapper is Context, IERC20NFTWrapper {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) internal _balances;

    mapping(address => mapping(address => uint256)) internal _allowances;

    uint256 internal _totalSupply;

    string internal _name;
    string internal _symbol;
    uint256 internal _decimals;

    address internal _mainWrapper;
    uint256 internal _objectId;

    function init(uint256 objectId) public virtual override {
        require(_mainWrapper == address(0), "Init already called!");
        (_name, _symbol, _decimals) = ISuperSaiyanToken(
            _mainWrapper = msg.sender
        )
            .getMintData(_objectId = objectId);
    }

    function mainWrapper() public virtual override view returns (address) {
        return _mainWrapper;
    }

    function objectId() public virtual override view returns (uint256) {
        return _objectId;
    }

    function name() public virtual override view returns (string memory) {
        return _name;
    }

    function symbol() public virtual override view returns (string memory) {
        return _symbol;
    }

    function decimals() public virtual override view returns (uint256) {
        return _decimals;
    }

    function totalSupply() public virtual override view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account)
        public
        virtual
        override
        view
        returns (uint256)
    {
        return _balances[account];
    }

    function mint(address owner, uint256 amount) public virtual override {
        require(msg.sender == _mainWrapper, "Unauthorized action!");
        _mint(owner, amount);
    }

    function burn(address owner, uint256 amount) public virtual override {
        require(
            msg.sender == _mainWrapper ||
                (ISuperSaiyanToken(_mainWrapper).source() == address(0) &&
                    msg.sender == owner),
            "Unauthorized action!"
        );
        _burn(owner, amount);
    }

    function transfer(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender)
        public
        virtual
        override
        view
        returns (uint256 allowanceAmount)
    {
        allowanceAmount = _allowances[owner][spender];
        if (
            allowanceAmount == 0 &&
            ISuperSaiyanToken(_mainWrapper).isApprovedForAll(owner, spender)
        ) {
            allowanceAmount = _totalSupply;
        }
    }

    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        if (_msgSender() == _mainWrapper) {
            return true;
        }
        if (
            !ISuperSaiyanToken(_mainWrapper).isApprovedForAll(
                sender,
                _msgSender()
            )
        ) {
            _approve(
                sender,
                _msgSender(),
                _allowances[sender][_msgSender()].sub(
                    amount,
                    "ERC20: transfer amount exceeds allowance"
                )
            );
        }
        return true;
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(
            amount,
            "ERC20: transfer amount exceeds balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
        ISuperSaiyanToken(_mainWrapper).emitTransferSingleEvent(_msgSender(), sender, recipient, _objectId, amount);
    }

    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _balances[account] = _balances[account].sub(
            amount,
            "ERC20: burn amount exceeds balance"
        );
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

// File: contracts\standalone\voting\DFOERC20NFTWrapper.sol

// SPDX_License_Identifier: MIT

pragma solidity ^0.6.0;




/**
 * @title DFOSuperSaiyanToken
 */
contract DFOERC20NFTWrapper is IDFOERC20NFTWrapper, ERC20NFTWrapper {

    function mint(uint256 amount) public virtual override {
        IMVDProxy proxy = IMVDProxy(getProxy());
        require(
            IMVDFunctionalitiesManager(
                proxy.getMVDFunctionalitiesManagerAddress()
            )
                .isAuthorizedFunctionality(msg.sender),
            "Unauthorized action!"
        );
        super._mint(address(proxy), amount);
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override(IERC20, ERC20NFTWrapper) returns (bool) {
        _transfer(sender, recipient, amount);
        address txSender = _msgSender();
        if (txSender == _mainWrapper || ISuperSaiyanToken(_mainWrapper).isApprovedForAll(
                sender,
                txSender
            )) {
            return true;
        }
        address proxy = getProxy();
        if (
            proxy == address(0) ||
            !(IMVDFunctionalityProposalManager(
                IMVDProxy(proxy).getMVDFunctionalityProposalManagerAddress()
            )
                .isValidProposal(txSender) && recipient == txSender)
        ) {
            _approve(
                sender,
                txSender,
                _allowances[sender][txSender] = _allowances[sender][txSender].sub(
                    amount,
                    "ERC20: transfer amount exceeds allowance"
                )
            );
        }
        return true;
    }

    receive() external payable {
        revert("ETH not accepted");
    }

    function getProxy() public override view returns (address) {
        address doubleProxy = IDFOSuperSaiyanToken(_mainWrapper).doubleProxy();
        return doubleProxy == address(0) ? address(0) : IDoubleProxy(doubleProxy).proxy();
    }

    function setProxy() public override {
    }
}

{
  "compilationTarget": {
    "DFOERC20NFTWrapper.sol": "DFOERC20NFTWrapper"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}