SN0WCR4SH

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

pragma solidity ^0.8.7;

library AnonymiceLibrary {
    string internal constant TABLE =
        "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

    function encode(bytes memory data) internal pure returns (string memory) {
        if (data.length == 0) return "";

        // load the table into memory
        string memory table = TABLE;

        // multiply by 4/3 rounded up
        uint256 encodedLen = 4 * ((data.length + 2) / 3);

        // add some extra buffer at the end required for the writing
        string memory result = new string(encodedLen + 32);

        assembly {
            // set the actual output length
            mstore(result, encodedLen)

            // prepare the lookup table
            let tablePtr := add(table, 1)

            // input ptr
            let dataPtr := data
            let endPtr := add(dataPtr, mload(data))

            // result ptr, jump over length
            let resultPtr := add(result, 32)

            // run over the input, 3 bytes at a time
            for {

            } lt(dataPtr, endPtr) {

            } {
                dataPtr := add(dataPtr, 3)

                // read 3 bytes
                let input := mload(dataPtr)

                // write 4 characters
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(shr(6, input), 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
                mstore(
                    resultPtr,
                    shl(248, mload(add(tablePtr, and(input, 0x3F))))
                )
                resultPtr := add(resultPtr, 1)
            }

            // padding with '='
            switch mod(mload(data), 3)
            case 1 {
                mstore(sub(resultPtr, 2), shl(240, 0x3d3d))
            }
            case 2 {
                mstore(sub(resultPtr, 1), shl(248, 0x3d))
            }
        }

        return result;
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    function parseInt(string memory _a)
        internal
        pure
        returns (uint8 _parsedInt)
    {
        bytes memory bresult = bytes(_a);
        uint8 mint = 0;
        for (uint8 i = 0; i < bresult.length; i++) {
            if (
                (uint8(uint8(bresult[i])) >= 48) &&
                (uint8(uint8(bresult[i])) <= 57)
            ) {
                mint *= 10;
                mint += uint8(bresult[i]) - 48;
            }
        }
        return mint;
    }

    function substring(
        string memory str,
        uint256 startIndex,
        uint256 endIndex
    ) internal pure returns (string memory) {
        bytes memory strBytes = bytes(str);
        bytes memory result = new bytes(endIndex - startIndex);
        for (uint256 i = startIndex; i < endIndex; i++) {
            result[i - startIndex] = strBytes[i];
        }
        return string(result);
    }

    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Trees proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];
            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
            }
        }
        return computedHash;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import "./AnonymiceLibrary.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";

contract SnowCrash is ERC721, Ownable {
    /*
 ______     __   __     ______     __     __     ______     ______     ______     ______     __  __    
/\  ___\   /\ "-.\ \   /\  __ \   /\ \  _ \ \   /\  ___\   /\  == \   /\  __ \   /\  ___\   /\ \_\ \   
\ \___  \  \ \ \-.  \  \ \ \/\ \  \ \ \/ ".\ \  \ \ \____  \ \  __<   \ \  __ \  \ \___  \  \ \  __ \  
 \/\_____\  \ \_\\"\_\  \ \_____\  \ \__/".~\_\  \ \_____\  \ \_\ \_\  \ \_\ \_\  \/\_____\  \ \_\ \_\ 
  \/_____/   \/_/ \/_/   \/_____/   \/_/   \/_/   \/_____/   \/_/ /_/   \/_/\/_/   \/_____/   \/_/\/_/ 
*/
    using AnonymiceLibrary for uint8;

    struct Trait {
        string traitName;
        string traitType;
    }

    //Mappings
    mapping(uint256 => Trait[]) public traitTypes;
    mapping(uint256 => string) internal tokenIdToHash;
    mapping(address => uint256) private lastWrite;

    //Mint Checks
    mapping(address => bool) addressFreeMinted;
    mapping(address => bool) contributorMints;
    uint256 contributorCount = 0;
    uint256 regularCount = 0;
    uint256 public totalSupply = 0;

    //uint256s
    uint256 constant MAX_SUPPLY = 256;
    uint256 constant MINT_COST = 0.0256 ether;
    uint256 constant PUBLIC_START_BLOCK = 14651420;
    uint256 SEED_NONCE = 0;

    //minting flag
    bool ogMinted = false;
    bool public MINTING_LIVE = false;

    //uint arrays
    uint16[][8] TIERS;

    //p5js url
    string p5jsUrl;
    string p5jsIntegrity;
    string imageUrl;
    string animationUrl;

    bytes32 constant whitelistRoot =
        0x2cd756bd043061e7f4cd5b02ccfbd86ac3965d315356463f26afa7c6915ab14f;

    constructor() payable ERC721("SnwCrsh", "SNOW") {
        //Declare all the rarity tiers

        //col
        TIERS[0] = [1600, 1200, 550, 550, 1200, 700, 1600, 700, 1200, 700];
        //border size
        TIERS[1] = [1000, 4000, 4000, 1000];
        //noise Max
        TIERS[2] = [1000, 2000, 4000, 3000];
        //speed
        TIERS[3] = [1000, 5500, 2500, 1000];
        //Slice thickness
        TIERS[4] = [2500, 3500, 2500, 1500];
        //secCol
        TIERS[5] = [7000, 3000];
        //charset
        TIERS[6] = [1000, 2500, 3000, 2500, 500, 500];
        //flowType
        TIERS[7] = [8500, 1500];
    }

    //prevents someone calling read functions the same block they mint
    modifier disallowIfStateIsChanging() {
        require(
            owner() == msg.sender || lastWrite[msg.sender] < block.number,
            "not so fast!"
        );
        _;
    }

    /*
 __    __     __     __   __     ______   __     __   __     ______    
/\ "-./  \   /\ \   /\ "-.\ \   /\__  _\ /\ \   /\ "-.\ \   /\  ___\   
\ \ \-./\ \  \ \ \  \ \ \-.  \  \/_/\ \/ \ \ \  \ \ \-.  \  \ \ \__ \  
 \ \_\ \ \_\  \ \_\  \ \_\\"\_\    \ \_\  \ \_\  \ \_\\"\_\  \ \_____\ 
  \/_/  \/_/   \/_/   \/_/ \/_/     \/_/   \/_/   \/_/ \/_/   \/_____/ 
                                                                                                                                                                                                                                               
   */

    /**
     * @dev Converts a digit from 0 - 10000 into its corresponding rarity based on the given rarity tier.
     * @param _randinput The input from 0 - 10000 to use for rarity gen.
     * @param _rarityTier The tier to use.
     */
    function rarityGen(uint256 _randinput, uint8 _rarityTier)
        internal
        view
        returns (uint8)
    {
        uint16 currentLowerBound = 0;
        for (uint8 i = 0; i < TIERS[_rarityTier].length; i++) {
            uint16 thisPercentage = TIERS[_rarityTier][i];
            if (
                _randinput >= currentLowerBound &&
                _randinput < currentLowerBound + thisPercentage
            ) return i;
            currentLowerBound = currentLowerBound + thisPercentage;
        }

        revert();
    }

    /**
     * @dev Generates a 11 digit hash from a tokenId, address, and random number.
     * @param _t The token id to be used within the hash.
     * @param _a The address to be used within the hash.
     * @param _c The custom nonce to be used within the hash.
     */
    function hash(
        uint256 _t,
        address _a,
        uint256 _c
    ) internal returns (string memory) {
        require(_c < 11);

        // This will generate a 11 character string.
        // The first 2 digits are the palette.
        string memory currentHash = "";

        for (uint8 i = 0; i < 8; i++) {
            SEED_NONCE++;
            uint16 _randinput = uint16(
                uint256(
                    keccak256(
                        abi.encodePacked(
                            block.timestamp,
                            block.difficulty,
                            _t,
                            _a,
                            _c,
                            SEED_NONCE
                        )
                    )
                ) % 10000
            );
            currentHash = string(
                abi.encodePacked(
                    currentHash,
                    rarityGen(_randinput, i).toString()
                )
            );
        }

        return currentHash;
    }

    /**
     * @dev Mint internal, this is to avoid code duplication.
     */
    function mintInternal() internal {
        require(
            MINTING_LIVE == true || msg.sender == owner(),
            "Minting not live"
        );
        uint256 _totalSupply = totalSupply;
        require(_totalSupply < MAX_SUPPLY);
        require(!AnonymiceLibrary.isContract(msg.sender));
        require(regularCount < 241);
        uint256 thisTokenId = _totalSupply;

        tokenIdToHash[thisTokenId] = hash(thisTokenId, msg.sender, 0);
        lastWrite[msg.sender] = block.number;

        ++totalSupply;

        _mint(msg.sender, thisTokenId);
    }

    function mintOgBatch(address[] memory _addresses)
        external
        payable
        onlyOwner
    {
        require(ogMinted == false);
        require(_addresses.length == 10);
        for (uint256 i = 0; i < 10; i++) {
            uint256 thisTokenId = i;
            tokenIdToHash[thisTokenId] = hash(thisTokenId, _addresses[i], 0);
            _mint(_addresses[i], thisTokenId);
        }
        totalSupply = 10;
        regularCount = 10;
        ogMinted = true;
    }

    /**
     * @dev Mints new tokens.
     */
    function mintFreeSnowCrash(address account, bytes32[] calldata merkleProof)
        external
    {
        bytes32 node = keccak256(abi.encodePacked(account));

        require(MerkleProof.verify(merkleProof, whitelistRoot, node));
        require(
            addressFreeMinted[msg.sender] != true,
            "Address already free minted"
        );

        addressFreeMinted[msg.sender] = true;
        ++regularCount;
        return mintInternal();
    }

    function mintPaidSnowCrash() external payable {
        require(msg.value == MINT_COST, "Insufficient ETH sent");
        require(block.number > PUBLIC_START_BLOCK);
        ++regularCount;
        return mintInternal();
    }

    function mintCircolorsContributor() external {
        require(contributorMints[msg.sender] == true);
        require(contributorCount < 16);

        contributorMints[msg.sender] = false;
        ++contributorCount;

        return mintInternal();
    }

    /*
 ______     ______     ______     _____     __     __   __     ______    
/\  == \   /\  ___\   /\  __ \   /\  __-.  /\ \   /\ "-.\ \   /\  ___\   
\ \  __<   \ \  __\   \ \  __ \  \ \ \/\ \ \ \ \  \ \ \-.  \  \ \ \__ \  
 \ \_\ \_\  \ \_____\  \ \_\ \_\  \ \____-  \ \_\  \ \_\\"\_\  \ \_____\ 
  \/_/ /_/   \/_____/   \/_/\/_/   \/____/   \/_/   \/_/ \/_/   \/_____/                                                                    
                                                                                           
*/

    /**
     * @dev Hash to HTML function
     */
    function hashToHTML(string memory _hash, uint256 _tokenId)
        external
        view
        disallowIfStateIsChanging
        returns (string memory)
    {
        string memory htmlString = string(
            abi.encodePacked(
                "data:text/html,%3Chtml%3E%3Chead%3E%3Cscript%20src%3D%22",
                p5jsUrl,
                "%22%20integrity%3D%22",
                p5jsIntegrity,
                "%22%20crossorigin%3D%22anonymous%22%3E%3C%2Fscript%3E%3C%2Fhead%3E%3Cbody%3E%3Cscript%3Evar%20tokenId%3D",
                AnonymiceLibrary.toString(_tokenId),
                "%3Bvar%20hash%3D%22",
                _hash,
                "%22%3B"
            )
        );

        htmlString = string(
            abi.encodePacked(
                htmlString,
                "let%20f%3D0%3Blet%20cSet%3D%5B%22%C3%91%2450c-%22%2C%22%4097%3F%3B%2C%22%2C%22%238%C2%A3%21%3A.%22%2C%22%E2%82%A942a%2B_%22%2C%22%25gm%3B%29%27%22%2C%220101%2F%20%22%5D%3Blet%20xoff1%2Cyoff1%2Cxyoff%2Cn%2Ccols%3D%5B0%2C1%2C2%2C4%2C5%2C6%2C7%2C8%2C9%2C11%5D%2CfSizes%3D%5B12.5%2C9%2C6%2C4.7%5D%2CnoiseEnd%3D%5B.001%2C.002%2C.005%2C.008%5D%2Cspds%3D%5B.7%2C1.2%2C2.5%2C2.6%5D%2CtextCol%3D%5B0%2C100%5D%2CcSprd%3D%5B.06%2C.12%2C.18%2C.24%5D%2Ct%3D0%2CsT%3D0%2CcT%3D0%2Clp%3D%210%2Crv%3D%211%2Cw%3D500%2Ch%3D500%3Bfunction%20setup%28%29%7BcreateCanvas%28w%2Ch%29%2CcolorMode%28HSB%2C360%2C100%2C100%29%2CtextFont%28%22Courier%22%29%2CnoiseSeed%28tokenId%29%2CcO%3D30%2Acols%5BparseInt%28hash.substring%280%2C1%29%29%5D%2CfW%3Dwidth%2FfSizes%5BparseInt%28hash.substring%281%2C2%29%29%5D%2CfH%3Dheight%2FfSizes%5BparseInt%28hash.substring%281%2C2%29%29%5D%2Cend%3DnoiseEnd%5BparseInt%28hash.substring%282%2C3%29%29%5D%2Csp%3Dspds%5BparseInt%28hash.substring%283%2C4%29%29%5D%2F%28fW%2BfH%29%2F3%2Cs%3DcSprd%5BparseInt%28hash.substring%284%2C5%29%29%5D%2CbT%3DtextCol%5BparseInt%28hash.substring%285%2C6%29%29%5D%2Cc%3DparseInt%28hash.substring%286%2C7%29%29%2CfTyp%3DparseInt%28hash.substring%287%2C8%29%29%2CsO%3D80%2C100%3D%3DbT%3FbO%3D85%3AbO%3D100%2Cfill%28cT%2CsT%2CbT%29%7Dfunction%20draw%28%29%7Bbackground%28cO%2CsO%2CbO%29%3Bfor%28let%20e%3DfW%3Be%3C%3Dwidth-fW%3Be%2B%3D10%29for%28let%20o%3DfH%3Bo%3C%3Dheight-fH%3Bo%2B%3D10%29xoff1%3Dmap%28e%2CfW%2Cwidth%2C0%2Cend%29%2Cyoff1%3Dmap%28o%2CfH%2Cheight%2C0%2Cend%29%2Cxyoff%3Dxoff1%2Byoff1%2Cn%3Dnoise%28e%2Axyoff%2Bt%2Co%2Axyoff%2Bt%2Cf%29%2CnoStroke%28%29%2Cfill%28cT%2CsT%2CbT%29%2Cn%3E.5%2B.8%2As%7C%7Cn%3C.5-.8%2As%3Ftext%28cSet%5Bc%5D%5B0%5D%2Ce%2Co%29%3An%3E.5%2B.65%2As%7C%7Cn%3C.5-.65%2As%3Ftext%28cSet%5Bc%5D%5B1%5D%2Ce%2Co%29%3An%3E.5%2B.5%2As%7C%7Cn%3C.5-.5%2As%3Ftext%28cSet%5Bc%5D%5B2%5D%2Ce%2Co%29%3An%3E.5%2B.35%2As%7C%7Cn%3C.5-.35%2As%3Ftext%28cSet%5Bc%5D%5B3%5D%2Ce%2Co%29%3An%3E.5%2B.2%2As%7C%7Cn%3C.5-.2%2As%3Ftext%28cSet%5Bc%5D%5B4%5D%2Ce%2Co%29%3Atext%28cSet%5Bc%5D%5B5%5D%2Ce%2Co%29%3B0%3D%3Drv%3F0%3D%3DfTyp%3Ft%2B%3Dsp%3A%28f%2B%3Dsp%2Ct%2B%3Dsp%2F10%29%3A0%3D%3DfTyp%3Ft-%3Dsp%3A%28f-%3Dsp%2Ct-%3Dsp%2F10%29%2Ctext%28%22%23%22%2BtokenId.toString%28%29%2C10%2Cheight-10%29%7Dfunction%20mouseClicked%28%29%7BcB%3DcO%2CsB%3DsO%2CbB%3DbO%2CcO%3DcT%2CsO%3DsT%2CbO%3DbT%2CcT%3DcB%2CsT%3DsB%2CbT%3DbB%7Dfunction%20keyPressed%28%29%7B32%3D%3D%3DkeyCode%26%261%3D%3Dlp%3F%28noLoop%28%29%2Clp%3D%211%29%3AkeyCode%3D%3D%3DLEFT_ARROW%3F%28rv%3D%211%2Cloop%28%29%2Clp%3D%210%29%3AkeyCode%3D%3D%3DRIGHT_ARROW%3F%28rv%3D%210%2Cloop%28%29%2Clp%3D%210%29%3AkeyCode%3D%3D%3DUP_ARROW%3FresizeCanvas%28750%2C250%29%3AkeyCode%3D%3D%3DDOWN_ARROW%3FresizeCanvas%28500%2C500%29%3A16%3D%3D%3DkeyCode%3FresizeCanvas%28350%2C600%29%3A%28loop%28%29%2Clp%3D%210%29%7D%3C%2Fscript%3E%3C%2Fbody%3E%3C%2Fhtml%3E"
            )
        );

        return htmlString;
    }

    /**
     * @dev Hash to metadata function
     */
    function hashToMetadata(string memory _hash)
        public
        view
        disallowIfStateIsChanging
        returns (string memory)
    {
        string memory metadataString;

        for (uint8 i = 0; i < 8; i++) {
            uint8 thisTraitIndex = AnonymiceLibrary.parseInt(
                AnonymiceLibrary.substring(_hash, i, i + 1)
            );

            metadataString = string(
                abi.encodePacked(
                    metadataString,
                    '{"trait_type":"',
                    traitTypes[i][thisTraitIndex].traitType,
                    '","value":"',
                    traitTypes[i][thisTraitIndex].traitName,
                    '"}'
                )
            );

            if (i != 7)
                metadataString = string(abi.encodePacked(metadataString, ","));
        }

        return string(abi.encodePacked("[", metadataString, "]"));
    }

    /**
     * @dev Returns the SVG and metadata for a token Id
     * @param _tokenId The tokenId to return the SVG and metadata for.
     */
    function tokenURI(uint256 _tokenId)
        public
        view
        override
        returns (string memory)
    {
        require(_exists(_tokenId));

        string memory tokenHash = _tokenIdToHash(_tokenId);

        string
            memory description = '", "description": "256 ASCII SnowCrashes. Metadata & images mirrored on chain permanently and loops infinitely",';

        string memory encodedTokenId = AnonymiceLibrary.encode(
            bytes(string(abi.encodePacked(AnonymiceLibrary.toString(_tokenId))))
        );
        string memory encodedHash = AnonymiceLibrary.encode(
            bytes(string(abi.encodePacked(tokenHash)))
        );

        return
            string(
                abi.encodePacked(
                    "data:application/json;base64,",
                    AnonymiceLibrary.encode(
                        bytes(
                            string(
                                abi.encodePacked(
                                    '{"name": "SnowCrash #',
                                    AnonymiceLibrary.toString(_tokenId),
                                    description,
                                    '"animation_url":"',
                                    animationUrl,
                                    encodedTokenId,
                                    "&t=",
                                    encodedHash,
                                    '","image":"',
                                    imageUrl,
                                    AnonymiceLibrary.toString(_tokenId),
                                    "&t=",
                                    tokenHash,
                                    '","attributes":',
                                    hashToMetadata(tokenHash),
                                    "}"
                                )
                            )
                        )
                    )
                )
            );
    }

    /**
     * @dev Returns a hash for a given tokenId
     * @param _tokenId The tokenId to return the hash for.
     */
    function _tokenIdToHash(uint256 _tokenId)
        public
        view
        disallowIfStateIsChanging
        returns (string memory)
    {
        string memory tokenHash = tokenIdToHash[_tokenId];

        return tokenHash;
    }

    /*
 ______     __     __     __   __     ______     ______    
/\  __ \   /\ \  _ \ \   /\ "-.\ \   /\  ___\   /\  == \   
\ \ \/\ \  \ \ \/ ".\ \  \ \ \-.  \  \ \  __\   \ \  __<   
 \ \_____\  \ \__/".~\_\  \ \_\\"\_\  \ \_____\  \ \_\ \_\ 
  \/_____/   \/_/   \/_/   \/_/ \/_/   \/_____/   \/_/ /_/ 
                                                           
    /**
     * @dev Add a trait type
     * @param _traitTypeIndex The trait type index
     * @param traits Array of traits to add
     */

    function addTraitType(uint256 _traitTypeIndex, Trait[] memory traits)
        external
        payable
        onlyOwner
    {
        for (uint256 i = 0; i < traits.length; i++) {
            traitTypes[_traitTypeIndex].push(
                Trait(traits[i].traitName, traits[i].traitType)
            );
        }

        return;
    }

    function addContributorMint(address _account) external payable onlyOwner {
        contributorMints[_account] = true;
    }

    function flipMintingSwitch() external payable onlyOwner {
        MINTING_LIVE = !MINTING_LIVE;
    }

    /**
     * @dev Sets the p5js url
     * @param _p5jsUrl The address of the p5js file hosted on CDN
     */

    function setJsAddress(string memory _p5jsUrl) external payable onlyOwner {
        p5jsUrl = _p5jsUrl;
    }

    /**
     * @dev Sets the p5js resource integrity
     * @param _p5jsIntegrity The hash of the p5js file (to protect w subresource integrity)
     */

    function setJsIntegrity(string memory _p5jsIntegrity)
        external
        payable
        onlyOwner
    {
        p5jsIntegrity = _p5jsIntegrity;
    }

    /**
     * @dev Sets the base image url
     * @param _imageUrl The base url for image field
     */

    function setImageUrl(string memory _imageUrl) external payable onlyOwner {
        imageUrl = _imageUrl;
    }

    function setAnimationUrl(string memory _animationUrl)
        external
        payable
        onlyOwner
    {
        animationUrl = _animationUrl;
    }

    function withdraw() external payable onlyOwner {
        (bool success, ) = payable(msg.sender).call{
            value: address(this).balance
        }("");
        require(success);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "contracts/SnowCrash.sol": "SnowCrash"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}