// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.

    uint256 size;
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');

    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCall(target, data, 'Address: low-level call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    require(isContract(target), 'Address: call to non-contract');

    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    require(isContract(target), 'Address: static call to non-contract');

    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(isContract(target), 'Address: delegate call to non-contract');

    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly

        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

import {DataTypes} from '@aave/core-v3/contracts/protocol/libraries/types/DataTypes.sol';
import {FlashLoanSimpleReceiverBase} from '@aave/core-v3/contracts/flashloan/base/FlashLoanSimpleReceiverBase.sol';
import {GPv2SafeERC20} from '@aave/core-v3/contracts/dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IERC20} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {IERC20WithPermit} from '@aave/core-v3/contracts/interfaces/IERC20WithPermit.sol';
import {IPoolAddressesProvider} from '@aave/core-v3/contracts/interfaces/IPoolAddressesProvider.sol';
import {IPriceOracleGetter} from '@aave/core-v3/contracts/interfaces/IPriceOracleGetter.sol';
import {SafeMath} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/SafeMath.sol';
import {Ownable} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/Ownable.sol';

/**
 * @title BaseParaSwapAdapter
 * @notice Utility functions for adapters using ParaSwap
 * @author Jason Raymond Bell
 */
abstract contract BaseParaSwapAdapter is FlashLoanSimpleReceiverBase, Ownable {
  using SafeMath for uint256;
  using GPv2SafeERC20 for IERC20;
  using GPv2SafeERC20 for IERC20Detailed;
  using GPv2SafeERC20 for IERC20WithPermit;

  struct PermitSignature {
    uint256 amount;
    uint256 deadline;
    uint8 v;
    bytes32 r;
    bytes32 s;
  }

  // Max slippage percent allowed
  uint256 public constant MAX_SLIPPAGE_PERCENT = 3000; // 30%

  IPriceOracleGetter public immutable ORACLE;

  event Swapped(
    address indexed fromAsset,
    address indexed toAsset,
    uint256 fromAmount,
    uint256 receivedAmount
  );
  event Bought(
    address indexed fromAsset,
    address indexed toAsset,
    uint256 amountSold,
    uint256 receivedAmount
  );

  constructor(IPoolAddressesProvider addressesProvider) FlashLoanSimpleReceiverBase(addressesProvider) {
    ORACLE = IPriceOracleGetter(addressesProvider.getPriceOracle());
  }

  /**
   * @dev Get the price of the asset from the oracle denominated in eth
   * @param asset address
   * @return eth price for the asset
   */
  function _getPrice(address asset) internal view returns (uint256) {
    return ORACLE.getAssetPrice(asset);
  }

  /**
   * @dev Get the decimals of an asset
   * @return number of decimals of the asset
   */
  function _getDecimals(IERC20Detailed asset) internal view returns (uint8) {
    uint8 decimals = asset.decimals();
    // Ensure 10**decimals won't overflow a uint256
    require(decimals <= 77, 'TOO_MANY_DECIMALS_ON_TOKEN');
    return decimals;
  }

  /**
   * @dev Get the aToken associated to the asset
   * @return address of the aToken
   */
  function _getReserveData(address asset) internal view returns (DataTypes.ReserveData memory) {
    return POOL.getReserveData(asset);
  }

  function _pullATokenAndWithdraw(
    address reserve,
    address user,
    uint256 amount,
    PermitSignature memory permitSignature
  ) internal {
    IERC20WithPermit reserveAToken = IERC20WithPermit(
      _getReserveData(address(reserve)).aTokenAddress
    );
    _pullATokenAndWithdraw(reserve, reserveAToken, user, amount, permitSignature);
  }

  /**
   * @dev Pull the ATokens from the user
   * @param reserve address of the asset
   * @param reserveAToken address of the aToken of the reserve
   * @param user address
   * @param amount of tokens to be transferred to the contract
   * @param permitSignature struct containing the permit signature
   */
  function _pullATokenAndWithdraw(
    address reserve,
    IERC20WithPermit reserveAToken,
    address user,
    uint256 amount,
    PermitSignature memory permitSignature
  ) internal {
    // If deadline is set to zero, assume there is no signature for permit
    if (permitSignature.deadline != 0) {
      reserveAToken.permit(
        user,
        address(this),
        permitSignature.amount,
        permitSignature.deadline,
        permitSignature.v,
        permitSignature.r,
        permitSignature.s
      );
    }

    // transfer from user to adapter
    reserveAToken.safeTransferFrom(user, address(this), amount);

    // withdraw reserve
    require(POOL.withdraw(reserve, amount, address(this)) == amount, 'UNEXPECTED_AMOUNT_WITHDRAWN');
  }

  /**
   * @dev Emergency rescue for token stucked on this contract, as failsafe mechanism
   * - Funds should never remain in this contract more time than during transactions
   * - Only callable by the owner
   */
  function rescueTokens(IERC20 token) external onlyOwner {
    token.safeTransfer(owner(), token.balanceOf(address(this)));
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

import {SafeERC20} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/SafeERC20.sol';
import {SafeMath} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/SafeMath.sol';
import {PercentageMath} from '@aave/core-v3/contracts/protocol/libraries/math/PercentageMath.sol';
import {IPoolAddressesProvider} from '@aave/core-v3/contracts/interfaces/IPoolAddressesProvider.sol';
import {IERC20Detailed} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {IParaSwapAugustus} from './interfaces/IParaSwapAugustus.sol';
import {IParaSwapAugustusRegistry} from './interfaces/IParaSwapAugustusRegistry.sol';
import {BaseParaSwapAdapter} from './BaseParaSwapAdapter.sol';

/**
 * @title BaseParaSwapSellAdapter
 * @notice Implements the logic for selling tokens on ParaSwap
 * @author Jason Raymond Bell
 */
abstract contract BaseParaSwapSellAdapter is BaseParaSwapAdapter {
  using PercentageMath for uint256;
  using SafeMath for uint256;
  using SafeERC20 for IERC20Detailed;

  IParaSwapAugustusRegistry public immutable AUGUSTUS_REGISTRY;

  constructor(IPoolAddressesProvider addressesProvider, IParaSwapAugustusRegistry augustusRegistry)
    BaseParaSwapAdapter(addressesProvider)
  {
    // Do something on Augustus registry to check the right contract was passed
    require(!augustusRegistry.isValidAugustus(address(0)));
    AUGUSTUS_REGISTRY = augustusRegistry;
  }

  /**
   * @dev Swaps a token for another using ParaSwap
   * @param fromAmountOffset Offset of fromAmount in Augustus calldata if it should be overwritten, otherwise 0
   * @param swapCalldata Calldata for ParaSwap's AugustusSwapper contract
   * @param augustus Address of ParaSwap's AugustusSwapper contract
   * @param assetToSwapFrom Address of the asset to be swapped from
   * @param assetToSwapTo Address of the asset to be swapped to
   * @param amountToSwap Amount to be swapped
   * @param minAmountToReceive Minimum amount to be received from the swap
   * @return amountReceived The amount received from the swap
   */
  function _sellOnParaSwap(
    uint256 fromAmountOffset,
    bytes memory swapCalldata,
    IParaSwapAugustus augustus,
    IERC20Detailed assetToSwapFrom,
    IERC20Detailed assetToSwapTo,
    uint256 amountToSwap,
    uint256 minAmountToReceive
  ) internal returns (uint256 amountReceived) {
    require(AUGUSTUS_REGISTRY.isValidAugustus(address(augustus)), 'INVALID_AUGUSTUS');

    {
      uint256 fromAssetDecimals = _getDecimals(assetToSwapFrom);
      uint256 toAssetDecimals = _getDecimals(assetToSwapTo);

      uint256 fromAssetPrice = _getPrice(address(assetToSwapFrom));
      uint256 toAssetPrice = _getPrice(address(assetToSwapTo));

      uint256 expectedMinAmountOut = amountToSwap
        .mul(fromAssetPrice.mul(10**toAssetDecimals))
        .div(toAssetPrice.mul(10**fromAssetDecimals))
        .percentMul(PercentageMath.PERCENTAGE_FACTOR - MAX_SLIPPAGE_PERCENT);

      require(expectedMinAmountOut <= minAmountToReceive, 'MIN_AMOUNT_EXCEEDS_MAX_SLIPPAGE');
    }

    uint256 balanceBeforeAssetFrom = assetToSwapFrom.balanceOf(address(this));
    require(balanceBeforeAssetFrom >= amountToSwap, 'INSUFFICIENT_BALANCE_BEFORE_SWAP');
    uint256 balanceBeforeAssetTo = assetToSwapTo.balanceOf(address(this));

    address tokenTransferProxy = augustus.getTokenTransferProxy();
    assetToSwapFrom.safeApprove(tokenTransferProxy, 0);
    assetToSwapFrom.safeApprove(tokenTransferProxy, amountToSwap);

    if (fromAmountOffset != 0) {
      // Ensure 256 bit (32 bytes) fromAmount value is within bounds of the
      // calldata, not overlapping with the first 4 bytes (function selector).
      require(
        fromAmountOffset >= 4 && fromAmountOffset <= swapCalldata.length.sub(32),
        'FROM_AMOUNT_OFFSET_OUT_OF_RANGE'
      );
      // Overwrite the fromAmount with the correct amount for the swap.
      // In memory, swapCalldata consists of a 256 bit length field, followed by
      // the actual bytes data, that is why 32 is added to the byte offset.
      assembly {
        mstore(add(swapCalldata, add(fromAmountOffset, 32)), amountToSwap)
      }
    }
    (bool success, ) = address(augustus).call(swapCalldata);
    if (!success) {
      // Copy revert reason from call
      assembly {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(
      assetToSwapFrom.balanceOf(address(this)) == balanceBeforeAssetFrom - amountToSwap,
      'WRONG_BALANCE_AFTER_SWAP'
    );
    amountReceived = assetToSwapTo.balanceOf(address(this)).sub(balanceBeforeAssetTo);
    require(amountReceived >= minAmountToReceive, 'INSUFFICIENT_AMOUNT_RECEIVED');

    emit Swapped(address(assetToSwapFrom), address(assetToSwapTo), amountToSwap, amountReceived);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

import {IFlashLoanSimpleReceiver} from '../interfaces/IFlashLoanSimpleReceiver.sol';
import {IPoolAddressesProvider} from '../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../interfaces/IPool.sol';

/**
 * @title FlashLoanSimpleReceiverBase
 * @author Aave
 * @notice Base contract to develop a flashloan-receiver contract.
 */
abstract contract FlashLoanSimpleReceiverBase is IFlashLoanSimpleReceiver {
  IPoolAddressesProvider public immutable override ADDRESSES_PROVIDER;
  IPool public immutable override POOL;

  constructor(IPoolAddressesProvider provider) {
    ADDRESSES_PROVIDER = provider;
    POOL = IPool(provider.getPool());
  }
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity 0.8.10;

import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';

/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }

  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }

  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\x08\xc3\x79\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }

      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }

        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())

        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;

import {IERC20} from './IERC20.sol';

interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';

/**
 * @title IERC20WithPermit
 * @author Aave
 * @notice Interface for the permit function (EIP-2612)
 */
interface IERC20WithPermit is IERC20 {
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from '../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../interfaces/IPool.sol';

/**
 * @title IFlashLoanSimpleReceiver
 * @author Aave
 * @notice Defines the basic interface of a flashloan-receiver contract.
 * @dev Implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 */
interface IFlashLoanSimpleReceiver {
  /**
   * @notice Executes an operation after receiving the flash-borrowed asset
   * @dev Ensure that the contract can return the debt + premium, e.g., has
   *      enough funds to repay and has approved the Pool to pull the total amount
   * @param asset The address of the flash-borrowed asset
   * @param amount The amount of the flash-borrowed asset
   * @param premium The fee of the flash-borrowed asset
   * @param initiator The address of the flashloan initiator
   * @param params The byte-encoded params passed when initiating the flashloan
   * @return True if the execution of the operation succeeds, false otherwise
   */
  function executeOperation(
    address asset,
    uint256 amount,
    uint256 premium,
    address initiator,
    bytes calldata params
  ) external returns (bool);

  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  function POOL() external view returns (IPool);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

interface IParaSwapAugustus {
  function getTokenTransferProxy() external view returns (address);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

interface IParaSwapAugustusRegistry {
  function isValidAugustus(address augustus) external view returns (bool);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPriceOracleGetter
 * @author Aave
 * @notice Interface for the Aave price oracle.
 */
interface IPriceOracleGetter {
  /**
   * @notice Returns the base currency address
   * @dev Address 0x0 is reserved for USD as base currency.
   * @return Returns the base currency address.
   */
  function BASE_CURRENCY() external view returns (address);

  /**
   * @notice Returns the base currency unit
   * @dev 1 ether for ETH, 1e8 for USD.
   * @return Returns the base currency unit.
   */
  function BASE_CURRENCY_UNIT() external view returns (uint256);

  /**
   * @notice Returns the asset price in the base currency
   * @param asset The address of the asset
   * @return The price of the asset
   */
  function getAssetPrice(address asset) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.10;

import './Context.sol';

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    address msgSender = _msgSender();
    _owner = msgSender;
    emit OwnershipTransferred(address(0), msgSender);
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(_owner == _msgSender(), 'Ownable: caller is not the owner');
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    emit OwnershipTransferred(_owner, address(0));
    _owner = address(0);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), 'Ownable: new owner is the zero address');
    emit OwnershipTransferred(_owner, newOwner);
    _owner = newOwner;
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.10;

import {IERC20Detailed} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {IERC20WithPermit} from '@aave/core-v3/contracts/interfaces/IERC20WithPermit.sol';
import {IPoolAddressesProvider} from '@aave/core-v3/contracts/interfaces/IPoolAddressesProvider.sol';
import {SafeERC20} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/SafeERC20.sol';
import {SafeMath} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/SafeMath.sol';
import {BaseParaSwapSellAdapter} from './BaseParaSwapSellAdapter.sol';
import {IParaSwapAugustusRegistry} from './interfaces/IParaSwapAugustusRegistry.sol';
import {IParaSwapAugustus} from './interfaces/IParaSwapAugustus.sol';
import {ReentrancyGuard} from '../../dependencies/openzeppelin/ReentrancyGuard.sol';

/**
 * @title ParaSwapLiquiditySwapAdapter
 * @notice Adapter to swap liquidity using ParaSwap.
 * @author Jason Raymond Bell
 */
contract ParaSwapLiquiditySwapAdapter is BaseParaSwapSellAdapter, ReentrancyGuard {
  using SafeMath for uint256;
  using SafeERC20 for IERC20Detailed;

  constructor(
    IPoolAddressesProvider addressesProvider,
    IParaSwapAugustusRegistry augustusRegistry,
    address owner
  ) BaseParaSwapSellAdapter(addressesProvider, augustusRegistry) {
    transferOwnership(owner);
  }

  /**
   * @dev Swaps the received reserve amount from the flash loan into the asset specified in the params.
   * The received funds from the swap are then deposited into the protocol on behalf of the user.
   * The user should give this contract allowance to pull the ATokens in order to withdraw the underlying asset and repay the flash loan.
   * @param asset The address of the flash-borrowed asset
   * @param amount The amount of the flash-borrowed asset
   * @param premium The fee of the flash-borrowed asset
   * @param initiator The address of the flashloan initiator
   * @param params The byte-encoded params passed when initiating the flashloan
   * @return True if the execution of the operation succeeds, false otherwise
   *   address assetToSwapTo Address of the underlying asset to be swapped to and deposited
   *   uint256 minAmountToReceive Min amount to be received from the swap
   *   uint256 swapAllBalanceOffset Set to offset of fromAmount in Augustus calldata if wanting to swap all balance, otherwise 0
   *   bytes swapCalldata Calldata for ParaSwap's AugustusSwapper contract
   *   address augustus Address of ParaSwap's AugustusSwapper contract
   *   PermitSignature permitParams Struct containing the permit signatures, set to all zeroes if not used
   */
  function executeOperation(
    address asset,
    uint256 amount,
    uint256 premium,
    address initiator,
    bytes calldata params
  ) external override nonReentrant returns (bool) {
    require(msg.sender == address(POOL), 'CALLER_MUST_BE_POOL');

    uint256 flashLoanAmount = amount;
    uint256 premiumLocal = premium;
    address initiatorLocal = initiator;
    IERC20Detailed assetToSwapFrom = IERC20Detailed(asset);
    (
      IERC20Detailed assetToSwapTo,
      uint256 minAmountToReceive,
      uint256 swapAllBalanceOffset,
      bytes memory swapCalldata,
      IParaSwapAugustus augustus,
      PermitSignature memory permitParams
    ) = abi.decode(
        params,
        (IERC20Detailed, uint256, uint256, bytes, IParaSwapAugustus, PermitSignature)
      );

    _swapLiquidity(
      swapAllBalanceOffset,
      swapCalldata,
      augustus,
      permitParams,
      flashLoanAmount,
      premiumLocal,
      initiatorLocal,
      assetToSwapFrom,
      assetToSwapTo,
      minAmountToReceive
    );

    return true;
  }

  /**
   * @dev Swaps an amount of an asset to another and deposits the new asset amount on behalf of the user without using a flash loan.
   * This method can be used when the temporary transfer of the collateral asset to this contract does not affect the user position.
   * The user should give this contract allowance to pull the ATokens in order to withdraw the underlying asset and perform the swap.
   * @param assetToSwapFrom Address of the underlying asset to be swapped from
   * @param assetToSwapTo Address of the underlying asset to be swapped to and deposited
   * @param amountToSwap Amount to be swapped, or maximum amount when swapping all balance
   * @param minAmountToReceive Minimum amount to be received from the swap
   * @param swapAllBalanceOffset Set to offset of fromAmount in Augustus calldata if wanting to swap all balance, otherwise 0
   * @param swapCalldata Calldata for ParaSwap's AugustusSwapper contract
   * @param augustus Address of ParaSwap's AugustusSwapper contract
   * @param permitParams Struct containing the permit signatures, set to all zeroes if not used
   */
  function swapAndDeposit(
    IERC20Detailed assetToSwapFrom,
    IERC20Detailed assetToSwapTo,
    uint256 amountToSwap,
    uint256 minAmountToReceive,
    uint256 swapAllBalanceOffset,
    bytes calldata swapCalldata,
    IParaSwapAugustus augustus,
    PermitSignature calldata permitParams
  ) external nonReentrant {
    IERC20WithPermit aToken = IERC20WithPermit(
      _getReserveData(address(assetToSwapFrom)).aTokenAddress
    );

    if (swapAllBalanceOffset != 0) {
      uint256 balance = aToken.balanceOf(msg.sender);
      require(balance <= amountToSwap, 'INSUFFICIENT_AMOUNT_TO_SWAP');
      amountToSwap = balance;
    }

    _pullATokenAndWithdraw(
      address(assetToSwapFrom),
      aToken,
      msg.sender,
      amountToSwap,
      permitParams
    );

    uint256 amountReceived = _sellOnParaSwap(
      swapAllBalanceOffset,
      swapCalldata,
      augustus,
      assetToSwapFrom,
      assetToSwapTo,
      amountToSwap,
      minAmountToReceive
    );

    assetToSwapTo.safeApprove(address(POOL), 0);
    assetToSwapTo.safeApprove(address(POOL), amountReceived);
    POOL.deposit(address(assetToSwapTo), amountReceived, msg.sender, 0);
  }

  /**
   * @dev Swaps an amount of an asset to another and deposits the funds on behalf of the initiator.
   * @param swapAllBalanceOffset Set to offset of fromAmount in Augustus calldata if wanting to swap all balance, otherwise 0
   * @param swapCalldata Calldata for ParaSwap's AugustusSwapper contract
   * @param augustus Address of ParaSwap's AugustusSwapper contract
   * @param permitParams Struct containing the permit signatures, set to all zeroes if not used
   * @param flashLoanAmount Amount of the flash loan i.e. maximum amount to swap
   * @param premium Fee of the flash loan
   * @param initiator Account that initiated the flash loan
   * @param assetToSwapFrom Address of the underyling asset to be swapped from
   * @param assetToSwapTo Address of the underlying asset to be swapped to and deposited
   * @param minAmountToReceive Min amount to be received from the swap
   */
  function _swapLiquidity(
    uint256 swapAllBalanceOffset,
    bytes memory swapCalldata,
    IParaSwapAugustus augustus,
    PermitSignature memory permitParams,
    uint256 flashLoanAmount,
    uint256 premium,
    address initiator,
    IERC20Detailed assetToSwapFrom,
    IERC20Detailed assetToSwapTo,
    uint256 minAmountToReceive
  ) internal {
    IERC20WithPermit aToken = IERC20WithPermit(
      _getReserveData(address(assetToSwapFrom)).aTokenAddress
    );
    uint256 amountToSwap = flashLoanAmount;

    uint256 balance = aToken.balanceOf(initiator);
    if (swapAllBalanceOffset != 0) {
      uint256 balanceToSwap = balance.sub(premium);
      require(balanceToSwap <= amountToSwap, 'INSUFFICIENT_AMOUNT_TO_SWAP');
      amountToSwap = balanceToSwap;
    } else {
      require(balance >= amountToSwap.add(premium), 'INSUFFICIENT_ATOKEN_BALANCE');
    }

    uint256 amountReceived = _sellOnParaSwap(
      swapAllBalanceOffset,
      swapCalldata,
      augustus,
      assetToSwapFrom,
      assetToSwapTo,
      amountToSwap,
      minAmountToReceive
    );

    assetToSwapTo.safeApprove(address(POOL), 0);
    assetToSwapTo.safeApprove(address(POOL), amountReceived);
    POOL.deposit(address(assetToSwapTo), amountReceived, initiator, 0);

    _pullATokenAndWithdraw(
      address(assetToSwapFrom),
      aToken,
      initiator,
      amountToSwap.add(premium),
      permitParams
    );

    // Repay flash loan
    assetToSwapFrom.safeApprove(address(POOL), 0);
    assetToSwapFrom.safeApprove(address(POOL), flashLoanAmount.add(premium));
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;

  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;

  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }

  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.10;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
  // Booleans are more expensive than uint256 or any type that takes up a full
  // word because each write operation emits an extra SLOAD to first read the
  // slot's contents, replace the bits taken up by the boolean, and then write
  // back. This is the compiler's defense against contract upgrades and
  // pointer aliasing, and it cannot be disabled.

  // The values being non-zero value makes deployment a bit more expensive,
  // but in exchange the refund on every call to nonReentrant will be lower in
  // amount. Since refunds are capped to a percentage of the total
  // transaction's gas, it is best to keep them low in cases like this one, to
  // increase the likelihood of the full refund coming into effect.
  uint256 private constant _NOT_ENTERED = 1;
  uint256 private constant _ENTERED = 2;

  uint256 private _status;

  constructor() {
    _status = _NOT_ENTERED;
  }

  /**
   * @dev Prevents a contract from calling itself, directly or indirectly.
   * Calling a `nonReentrant` function from another `nonReentrant`
   * function is not supported. It is possible to prevent this from happening
   * by making the `nonReentrant` function external, and make it call a
   * `private` function that does the actual work.
   */
  modifier nonReentrant() {
    // On the first call to nonReentrant, _notEntered will be true
    require(_status != _ENTERED, 'ReentrancyGuard: reentrant call');

    // Any calls to nonReentrant after this point will fail
    _status = _ENTERED;

    _;

    // By storing the original value once again, a refund is triggered (see
    // https://eips.ethereum.org/EIPS/eip-2200)
    _status = _NOT_ENTERED;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import './IERC20.sol';
import './Address.sol';

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  using Address for address;

  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
  }

  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    _callOptionalReturn(
      token,
      abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
    );
  }

  /**
   * @dev Deprecated. This function has issues similar to the ones found in
   * {IERC20-approve}, and its usage is discouraged.
   *
   * Whenever possible, use {safeIncreaseAllowance} and
   * {safeDecreaseAllowance} instead.
   */
  function safeApprove(IERC20 token, address spender, uint256 value) internal {
    // safeApprove should only be called when setting an initial allowance,
    // or when resetting it to zero. To increase and decrease it, use
    // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
    require(
      (value == 0) || (token.allowance(address(this), spender) == 0),
      'SafeERC20: approve from non-zero to non-zero allowance'
    );
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
  }

  function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    uint256 newAllowance = token.allowance(address(this), spender) + value;
    _callOptionalReturn(
      token,
      abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
    );
  }

  function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    unchecked {
      uint256 oldAllowance = token.allowance(address(this), spender);
      require(oldAllowance >= value, 'SafeERC20: decreased allowance below zero');
      uint256 newAllowance = oldAllowance - value;
      _callOptionalReturn(
        token,
        abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
      );
    }
  }

  /**
   * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
   * on the return value: the return value is optional (but if data is returned, it must not be false).
   * @param token The token targeted by the call.
   * @param data The call data (encoded using abi.encode or one of its variants).
   */
  function _callOptionalReturn(IERC20 token, bytes memory data) private {
    // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
    // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
    // the target address contains contract code and also asserts for success in the low-level call.

    bytes memory returndata = address(token).functionCall(data, 'SafeERC20: low-level call failed');
    if (returndata.length > 0) {
      // Return data is optional
      require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
    }
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;

/// @title Optimized overflow and underflow safe math operations
/// @notice Contains methods for doing math operations that revert on overflow or underflow for minimal gas cost
library SafeMath {
  /// @notice Returns x + y, reverts if sum overflows uint256
  /// @param x The augend
  /// @param y The addend
  /// @return z The sum of x and y
  function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
    unchecked {
      require((z = x + y) >= x);
    }
  }

  /// @notice Returns x - y, reverts if underflows
  /// @param x The minuend
  /// @param y The subtrahend
  /// @return z The difference of x and y
  function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
    unchecked {
      require((z = x - y) <= x);
    }
  }

  /// @notice Returns x - y, reverts if underflows
  /// @param x The minuend
  /// @param y The subtrahend
  /// @param message The error msg
  /// @return z The difference of x and y
  function sub(uint256 x, uint256 y, string memory message) internal pure returns (uint256 z) {
    unchecked {
      require((z = x - y) <= x, message);
    }
  }

  /// @notice Returns x * y, reverts if overflows
  /// @param x The multiplicand
  /// @param y The multiplier
  /// @return z The product of x and y
  function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
    unchecked {
      require(x == 0 || (z = x * y) / x == y);
    }
  }

  /// @notice Returns x / y, reverts if overflows - no specific check, solidity reverts on division by 0
  /// @param x The numerator
  /// @param y The denominator
  /// @return z The product of x and y
  function div(uint256 x, uint256 y) internal pure returns (uint256 z) {
    return x / y;
  }
}

{
  "compilationTarget": {
    "@aave/periphery-v3/contracts/adapters/paraswap/ParaSwapLiquiditySwapAdapter.sol": "ParaSwapLiquiditySwapAdapter"
  },
  "evmVersion": "berlin",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 100000
  },
  "remappings": []
}