0xac...fb1f
Time Between the Lines is Thread Through the Mind by Matto
PLOTS
收藏品
收藏品
此合同的源代码已经过验证！
合同元数据
编译器
0.8.19+commit.7dd6d404
语言
Solidity
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.0;
/**
* @title Art Blocks Script Storage Library
* @notice Utilize contract bytecode as persistent storage for large chunks of script string data.
* This library is intended to have an external deployed copy that is released in the future,
* and, as such, has been designed to support both updated V1 (versioned, with purging removed)
* reads as well as backwards-compatible reads for both a) the unversioned "V0" storage contracts
* which were deployed by the original version of this libary and b) contracts that were deployed
* using one of the SSTORE2 implementations referenced below.
* For these pre-V1 storage contracts (which themselves did not have any explicit versioning semantics)
* backwards-compatible reads are optimistic, and only expected to work for contracts actually
* deployed by the original version of this library – and may fail ungracefully if attempted to be
* used to read from other contracts.
* This library is split into two components, intended to be updated in tandem, and thus included
* here in the same source file. One component is an internal library that is intended to be embedded
* directly into other contracts and provides all _write_ functionality. The other is a public library
* that is intended to be deployed as a standalone contract and provides all _read_ functionality.
*
* @author Art Blocks Inc.
* @author Modified from 0xSequence (https://github.com/0xsequence/sstore2/blob/master/contracts/SSTORE2.sol)
* @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SSTORE2.sol)
*
* @dev Compared to the above two rerferenced libraries, this contracts-as-storage implementation makes a few
* notably different design decisions:
* - uses the `string` data type for input/output on reads, rather than speaking in bytes directly
* - stores the "writer" address (library user) in the deployed contract bytes, which is useful for
* on-chain introspection and provenance purposes
* - stores a very simple versioning string in the deployed contract bytes, which captures the version
* of the library that was used to deploy the storage contract and useful for supporting future
* compatibility management as this library evolves (e.g. in response to EOF v1 migration plans)
* Also, given that much of this library is written in assembly, this library makes use of a slightly
* different convention (when compared to the rest of the Art Blocks smart contract repo) around
* pre-defining return values in some cases in order to simplify need to directly memory manage these
* return values.
*/
/**
* @title Art Blocks Script Storage Library (Public, Reads)
* @author Art Blocks Inc.
* @notice The public library for reading from storage contracts. This library is intended to be deployed as a
* standalone contract, and provides all _read_ functionality.
*/
library BytecodeStorageReader {
// Define the set of known valid version strings that may be stored in the deployed storage contract bytecode
// note: These are all intentionally exactly 32-bytes and are null-terminated. Null-termination is used due
// to this being the standard expected formatting in common web3 tooling such as ethers.js. Please see
// the following for additional context: https://docs.ethers.org/v5/api/utils/strings/#Bytes32String
// Used for storage contracts that were deployed by an unknown source
bytes32 public constant UNKNOWN_VERSION_STRING =
"UNKNOWN_VERSION_STRING_________ ";
// Pre-dates versioning string, so this doesn't actually exist in any deployed contracts,
// but is useful for backwards-compatible semantics with original version of this library
bytes32 public constant V0_VERSION_STRING =
"BytecodeStorage_V0.0.0_________ ";
// The first versioned storage contract, deployed by an updated version of this library
bytes32 public constant V1_VERSION_STRING =
"BytecodeStorage_V1.0.0_________ ";
// The current version of this library.
bytes32 public constant CURRENT_VERSION = V1_VERSION_STRING;
//---------------------------------------------------------------------------------------------------------------//
// Starting Index | Size | Ending Index | Description //
//---------------------------------------------------------------------------------------------------------------//
// 0 | N/A | 0 | //
// 0 | 1 | 1 | single byte opcode for making the storage contract non-executable //
// 1 | 32 | 33 | the 32 byte slot used for storing a basic versioning string //
// 33 | 32 | 65 | the 32 bytes for storing the deploying contract's (0-padded) address //
//---------------------------------------------------------------------------------------------------------------//
// Define the offset for where the "meta bytes" end, and the "data bytes" begin. Note that this is a manually
// calculated value, and must be updated if the above table is changed. It is expected that tests will fail
// loudly if these values are not updated in-step with eachother.
uint256 private constant VERSION_OFFSET = 1;
uint256 private constant ADDRESS_OFFSET = 33;
uint256 private constant DATA_OFFSET = 65;
// Define the set of known *historic* offset values for where the "meta bytes" end, and the "data bytes" begin.
// SSTORE2 deployed storage contracts take the general format of:
// concat(0x00, data)
// note: this is true for both variants of the SSTORE2 library
uint256 private constant SSTORE2_DATA_OFFSET = 1;
// V0 deployed storage contracts take the general format of:
// concat(gated-cleanup-logic, deployer-address, data)
uint256 private constant V0_ADDRESS_OFFSET = 72;
uint256 private constant V0_DATA_OFFSET = 104;
// V1 deployed storage contracts take the general format of:
// concat(invalid opcode, version, deployer-address, data)
uint256 private constant V1_ADDRESS_OFFSET = ADDRESS_OFFSET;
uint256 private constant V1_DATA_OFFSET = DATA_OFFSET;
/*//////////////////////////////////////////////////////////////
READ LOGIC
//////////////////////////////////////////////////////////////*/
/**
* @notice Read a string from contract bytecode
* @param _address address of deployed contract with bytecode stored in the V0 or V1 format
* @return data string read from contract bytecode
* @dev This function performs input validation that the contract to read is in an expected format
*/
function readFromBytecode(
address _address
) public view returns (string memory data) {
uint256 dataOffset = _bytecodeDataOffsetAt(_address);
return string(readBytesFromBytecode(_address, dataOffset));
}
/**
* @notice Read the bytes from contract bytecode that was written to the EVM using SSTORE2
* @param _address address of deployed contract with bytecode stored in the SSTORE2 format
* @return data bytes read from contract bytecode
* @dev This function performs no input validation on the provided contract,
* other than that there is content to read (but not that its a "storage contract")
*/
function readBytesFromSSTORE2Bytecode(
address _address
) public view returns (bytes memory data) {
return readBytesFromBytecode(_address, SSTORE2_DATA_OFFSET);
}
/**
* @notice Read the bytes from contract bytecode, with an explicitly provided starting offset
* @param _address address of deployed contract with bytecode stored in the V0 or V1 format
* @param _offset offset to read from in contract bytecode, explicitly provided (not calculated)
* @return data bytes read from contract bytecode
* @dev This function performs no input validation on the provided contract,
* other than that there is content to read (but not that its a "storage contract")
*/
function readBytesFromBytecode(
address _address,
uint256 _offset
) public view returns (bytes memory data) {
// get the size of the bytecode
uint256 bytecodeSize = _bytecodeSizeAt(_address);
// handle case where address contains code < _offset
if (bytecodeSize < _offset) {
revert("ContractAsStorage: Read Error");
}
// handle case where address contains code >= dataOffset
// decrement by dataOffset to account for header info
uint256 size;
unchecked {
size = bytecodeSize - _offset;
}
assembly {
// allocate free memory
data := mload(0x40)
// update free memory pointer
// use and(x, not(0x1f) as cheaper equivalent to sub(x, mod(x, 0x20)).
// adding 0x1f to size + logic above ensures the free memory pointer
// remains word-aligned, following the Solidity convention.
mstore(0x40, add(data, and(add(add(size, 0x20), 0x1f), not(0x1f))))
// store length of data in first 32 bytes
mstore(data, size)
// copy code to memory, excluding the deployer-address
extcodecopy(_address, add(data, 0x20), _offset, size)
}
}
/**
* @notice Get address for deployer for given contract bytecode
* @param _address address of deployed contract with bytecode stored in the V0 or V1 format
* @return writerAddress address read from contract bytecode
*/
function getWriterAddressForBytecode(
address _address
) public view returns (address) {
// get the size of the data
uint256 bytecodeSize = _bytecodeSizeAt(_address);
// the dataOffset for the bytecode
uint256 addressOffset = _bytecodeAddressOffsetAt(_address);
// handle case where address contains code < addressOffset + 32 (address takes a whole slot)
if (bytecodeSize < (addressOffset + 32)) {
revert("ContractAsStorage: Read Error");
}
assembly {
// allocate free memory
let writerAddress := mload(0x40)
// shift free memory pointer by one slot
mstore(0x40, add(mload(0x40), 0x20))
// copy the 32-byte address of the data contract writer to memory
// note: this relies on the assumption noted at the top-level of
// this file that the storage layout for the deployed
// contracts-as-storage contract looks like::
// | invalid opcode | version-string (unless v0) | deployer-address (padded) | data |
extcodecopy(
_address,
writerAddress,
addressOffset,
0x20 // full 32-bytes, as address is expected to be zero-padded
)
return(
writerAddress,
0x20 // return size is entire slot, as it is zero-padded
)
}
}
/**
* @notice Get version for given contract bytecode
* @param _address address of deployed contract with bytecode stored in the V0 or V1 format
* @return version version read from contract bytecode
*/
function getLibraryVersionForBytecode(
address _address
) public view returns (bytes32) {
return _bytecodeVersionAt(_address);
}
/*//////////////////////////////////////////////////////////////
INTERNAL HELPER LOGIC
//////////////////////////////////////////////////////////////*/
/**
* @notice Returns the size of the bytecode at address `_address`
* @param _address address that may or may not contain bytecode
* @return size size of the bytecode code at `_address`
*/
function _bytecodeSizeAt(
address _address
) private view returns (uint256 size) {
assembly {
size := extcodesize(_address)
}
if (size == 0) {
revert("ContractAsStorage: Read Error");
}
}
/**
* @notice Returns the offset of the data in the bytecode at address `_address`
* @param _address address that may or may not contain bytecode
* @return dataOffset offset of data in bytecode if a known version, otherwise 0
*/
function _bytecodeDataOffsetAt(
address _address
) private view returns (uint256 dataOffset) {
bytes32 version = _bytecodeVersionAt(_address);
if (version == V1_VERSION_STRING) {
dataOffset = V1_DATA_OFFSET;
} else if (version == V0_VERSION_STRING) {
dataOffset = V0_DATA_OFFSET;
} else {
// unknown version, revert
revert("ContractAsStorage: Unsupported Version");
}
}
/**
* @notice Returns the offset of the address in the bytecode at address `_address`
* @param _address address that may or may not contain bytecode
* @return addressOffset offset of address in bytecode if a known version, otherwise 0
*/
function _bytecodeAddressOffsetAt(
address _address
) private view returns (uint256 addressOffset) {
bytes32 version = _bytecodeVersionAt(_address);
if (version == V1_VERSION_STRING) {
addressOffset = V1_ADDRESS_OFFSET;
} else if (version == V0_VERSION_STRING) {
addressOffset = V0_ADDRESS_OFFSET;
} else {
// unknown version, revert
revert("ContractAsStorage: Unsupported Version");
}
}
/**
* @notice Get version string for given contract bytecode
* @param _address address of deployed contract with bytecode stored in the V0 or V1 format
* @return version version string read from contract bytecode
*/
function _bytecodeVersionAt(
address _address
) private view returns (bytes32 version) {
// get the size of the data
uint256 bytecodeSize = _bytecodeSizeAt(_address);
// handle case where address contains code < minimum expected version string size,
// by returning early with the unknown version string
if (bytecodeSize < (VERSION_OFFSET + 32)) {
return UNKNOWN_VERSION_STRING;
}
assembly {
// allocate free memory
let versionString := mload(0x40)
// shift free memory pointer by one slot
mstore(0x40, add(mload(0x40), 0x20))
// copy the 32-byte version string of the bytecode library to memory
// note: this relies on the assumption noted at the top-level of
// this file that the storage layout for the deployed
// contracts-as-storage contract looks like:
// | invalid opcode | version-string (unless v0) | deployer-address (padded) | data |
extcodecopy(
_address,
versionString,
VERSION_OFFSET,
0x20 // 32-byte version string
)
// note: must check against literal strings, as Yul does not allow for
// dynamic strings in switch statements.
switch mload(versionString)
case "BytecodeStorage_V1.0.0_________ " {
version := V1_VERSION_STRING
}
case 0x2060486000396000513314601057fe5b60013614601957fe5b6000357fff0000 {
// the v0 variant of this library pre-dates formal versioning w/ version strings,
// so we check the first 32 bytes of the execution bytecode itself which
// is static and known across all storage contracts deployed with the first version
// of this library.
version := V0_VERSION_STRING
}
default {
version := UNKNOWN_VERSION_STRING
}
}
}
}
/**
* @title Art Blocks Script Storage Library (Internal, Writes)
* @author Art Blocks Inc.
* @notice The internal library for writing to storage contracts. This library is intended to be deployed
* within library client contracts that use this library to perform _write_ operations on storage.
*/
library BytecodeStorageWriter {
/*//////////////////////////////////////////////////////////////
WRITE LOGIC
//////////////////////////////////////////////////////////////*/
/**
* @notice Write a string to contract bytecode
* @param _data string to be written to contract. No input validation is performed on this parameter.
* @param address_ address of deployed contract with bytecode stored in the V0 or V1 format
*/
function writeToBytecode(
string memory _data
) internal returns (address address_) {
// prefix bytecode with
bytes memory creationCode = abi.encodePacked(
//---------------------------------------------------------------------------------------------------------------//
// Opcode | Opcode + Arguments | Description | Stack View //
//---------------------------------------------------------------------------------------------------------------//
// a.) creation code returns all code in the contract except for the first 11 (0B in hex) bytes, as these 11
// bytes are the creation code itself which we do not want to store in the deployed storage contract result
//---------------------------------------------------------------------------------------------------------------//
// 0x60 | 0x60_0B | PUSH1 11 | codeOffset //
// 0x59 | 0x59 | MSIZE | 0 codeOffset //
// 0x81 | 0x81 | DUP2 | codeOffset 0 codeOffset //
// 0x38 | 0x38 | CODESIZE | codeSize codeOffset 0 codeOffset //
// 0x03 | 0x03 | SUB | (codeSize - codeOffset) 0 codeOffset //
// 0x80 | 0x80 | DUP | (codeSize - codeOffset) (codeSize - codeOffset) 0 codeOffset //
// 0x92 | 0x92 | SWAP3 | codeOffset (codeSize - codeOffset) 0 (codeSize - codeOffset) //
// 0x59 | 0x59 | MSIZE | 0 codeOffset (codeSize - codeOffset) 0 (codeSize - codeOffset) //
// 0x39 | 0x39 | CODECOPY | 0 (codeSize - codeOffset) //
// 0xF3 | 0xF3 | RETURN | //
//---------------------------------------------------------------------------------------------------------------//
// (11 bytes)
hex"60_0B_59_81_38_03_80_92_59_39_F3",
//---------------------------------------------------------------------------------------------------------------//
// b.) ensure that the deployed storage contract is non-executeable (first opcode is the `invalid` opcode)
//---------------------------------------------------------------------------------------------------------------//
//---------------------------------------------------------------------------------------------------------------//
// 0xFE | 0xFE | INVALID | //
//---------------------------------------------------------------------------------------------------------------//
// (1 byte)
hex"FE",
//---------------------------------------------------------------------------------------------------------------//
// c.) store the version string, which is already represented as a 32-byte value
//---------------------------------------------------------------------------------------------------------------//
// (32 bytes)
BytecodeStorageReader.CURRENT_VERSION,
//---------------------------------------------------------------------------------------------------------------//
// d.) store the deploying-contract's address with 0-padding to fit a 20-byte address into a 32-byte slot
//---------------------------------------------------------------------------------------------------------------//
// (12 bytes)
hex"00_00_00_00_00_00_00_00_00_00_00_00",
// (20 bytes)
address(this),
// uploaded data (stored as bytecode) comes last
_data
);
assembly {
// deploy a new contract with the generated creation code.
// start 32 bytes into creationCode to avoid copying the byte length.
address_ := create(0, add(creationCode, 0x20), mload(creationCode))
}
// address must be non-zero if contract was deployed successfully
require(address_ != address(0), "ContractAsStorage: Write Error");
}
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
// Inspired by: https://ethereum.stackexchange.com/a/123950/103422
pragma solidity ^0.8.0;
/**
* @dev Operations on bytes32 data type, dealing with conversion to string.
*/
library Bytes32Strings {
/**
* @notice Intended to convert a `bytes32`-encoded string literal to `string`.
* Trims zero padding to arrive at original string literal.
*/
function toString(
bytes32 source
) internal pure returns (string memory result) {
uint8 length;
while (source[length] != 0 && length < 32) {
length++;
}
assembly {
// free memory pointer
result := mload(0x40)
// update free memory pointer to new "memory end"
// (offset is 64-bytes: 32 for length, 32 for data)
mstore(0x40, add(result, 0x40))
// store length in first 32-byte memory slot
mstore(result, length)
// write actual data in second 32-byte memory slot
mstore(add(result, 0x20), source)
}
}
/**
* @notice Intended to check if a `bytes32`-encoded string contains a given
* character with UTF-8 character code `utf8CharCode exactly `targetQty`
* times. Does not support searching for multi-byte characters, only
* characters with UTF-8 character codes < 0x80.
*/
function containsExactCharacterQty(
bytes32 source,
uint8 utf8CharCode,
uint8 targetQty
) internal pure returns (bool) {
uint8 _occurrences;
uint8 i;
for (i; i < 32; ) {
uint8 _charCode = uint8(source[i]);
// if not a null byte, or a multi-byte UTF-8 character, check match
if (_charCode != 0 && _charCode < 0x80) {
if (_charCode == utf8CharCode) {
unchecked {
// no risk of overflow since max 32 iterations < max uin8=255
++_occurrences;
}
}
}
unchecked {
// no risk of overflow since max 32 iterations < max uin8=255
++i;
}
}
return _occurrences == targetQty;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "@openzeppelin-4.7/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin-4.7/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin-4.7/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin-4.7/contracts/utils/Address.sol";
import "@openzeppelin-4.7/contracts/utils/Context.sol";
import "@openzeppelin-4.7/contracts/utils/Strings.sol";
import "@openzeppelin-4.7/contracts/utils/introspection/ERC165.sol";
/**
* @dev Forked version of the OpenZeppelin v4.7.1 ERC721 contract. Utilizes a
* struct to pack owner and hash seed into a single storage slot.
* ---------------------
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721_PackedHashSeed is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
/// struct to pack a token owner and hash seed into same storage slot
struct OwnerAndHashSeed {
// 20 bytes for address of token's owner
address owner;
// remaining 12 bytes allocated to token hash seed
bytes12 hashSeed;
}
/// mapping of token ID to OwnerAndHashSeed
/// @dev visibility internal so inheriting contracts can access
mapping(uint256 => OwnerAndHashSeed) internal _ownersAndHashSeeds;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(
bytes4 interfaceId
) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(
address owner
) public view virtual override returns (uint256) {
require(
owner != address(0),
"ERC721: address zero is not a valid owner"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(
uint256 tokenId
) public view virtual override returns (address) {
address owner = _ownersAndHashSeeds[tokenId].owner;
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(
uint256 tokenId
) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721_PackedHashSeed.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(
uint256 tokenId
) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(
address operator,
bool approved
) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(
address owner,
address operator
) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: caller is not token owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: caller is not token owner nor approved"
);
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownersAndHashSeeds[tokenId].owner != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(
address spender,
uint256 tokenId
) internal view virtual returns (bool) {
address owner = ERC721_PackedHashSeed.ownerOf(tokenId);
return (spender == owner ||
isApprovedForAll(owner, spender) ||
getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_ownersAndHashSeeds[tokenId].owner = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721_PackedHashSeed.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _ownersAndHashSeeds[tokenId].owner;
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721_PackedHashSeed.ownerOf(tokenId) == from,
"ERC721: transfer from incorrect owner"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_ownersAndHashSeeds[tokenId].owner = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721_PackedHashSeed.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity 0.8.19;
// Created By: Art Blocks Inc.
import "../../interfaces/v0.8.x/IRandomizer_V3CoreBase.sol";
import "../../interfaces/v0.8.x/IAdminACLV0.sol";
import "../../interfaces/v0.8.x/IGenArt721CoreContractV3_Engine.sol";
import "../../interfaces/v0.8.x/IGenArt721CoreContractExposesHashSeed.sol";
import "../../interfaces/v0.8.x/IDependencyRegistryCompatibleV0.sol";
import "../../interfaces/v0.8.x/IManifold.sol";
import "@openzeppelin-4.7/contracts/utils/Strings.sol";
import "@openzeppelin-4.7/contracts/access/Ownable.sol";
import "../../libs/v0.8.x/ERC721_PackedHashSeed.sol";
import "../../libs/v0.8.x/BytecodeStorageV1.sol";
import "../../libs/v0.8.x/Bytes32Strings.sol";
/**
* @title Art Blocks Engine ERC-721 core contract, V3.
* @author Art Blocks Inc.
* @notice Privileged Roles and Ownership:
* This contract is designed to be managed, with progressively limited powers
* as a project progresses from active to locked.
* Privileged roles and abilities are controlled by the admin ACL contract and
* artists. Both of these roles hold extensive power and can arbitrarily
* control and modify portions of projects, dependent upon project state. After
* a project is locked, important project metadata fields are locked including
* the project name, artist name, and script and display details. Edition size
* can never be increased.
* Care must be taken to ensure that the admin ACL contract and artist
* addresses are secure behind a multi-sig or other access control mechanism.
* ----------------------------------------------------------------------------
* The following functions are restricted to the Admin ACL contract:
* - updateArtblocksDependencyRegistryAddress
* - updateProviderSalesAddresses
* - updateProviderPrimarySalesPercentages (up to 100%)
* - updateProviderSecondarySalesBPS (up to 100%)
* - updateMinterContract
* - updateRandomizerAddress
* - toggleProjectIsActive
* - addProject
* - forbidNewProjects (forever forbidding new projects)
* - updateDefaultBaseURI (used to initialize new project base URIs)
* ----------------------------------------------------------------------------
* The following functions are restricted to either the Artist address or
* the Admin ACL contract, only when the project is not locked:
* - updateProjectName
* - updateProjectArtistName
* - updateProjectLicense
* - Change project script via addProjectScript, updateProjectScript,
* and removeProjectLastScript
* - updateProjectScriptType
* - updateProjectAspectRatio
* ----------------------------------------------------------------------------
* The following functions are restricted to only the Artist address:
* - proposeArtistPaymentAddressesAndSplits (Note that this has to be accepted
* by adminAcceptArtistAddressesAndSplits to take effect, which is restricted
* to the Admin ACL contract, or the artist if the core contract owner has
* renounced ownership. Also note that a proposal will be automatically
* accepted if the artist only proposes changed payee percentages without
* modifying any payee addresses, or is only removing payee addresses, or
* if the global config `autoApproveArtistSplitProposals` is set to `true`.)
* - toggleProjectIsPaused (note the artist can still mint while paused)
* - updateProjectSecondaryMarketRoyaltyPercentage (up to
ARTIST_MAX_SECONDARY_ROYALTY_PERCENTAGE percent)
* - updateProjectWebsite
* - updateProjectMaxInvocations (to a number greater than or equal to the
* current number of invocations, and less than current project maximum
* invocations)
* - updateProjectBaseURI (controlling the base URI for tokens in the project)
* ----------------------------------------------------------------------------
* The following function is restricted to either the Admin ACL contract, or
* the Artist address if the core contract owner has renounced ownership:
* - adminAcceptArtistAddressesAndSplits
* - updateProjectArtistAddress (owner ultimately controlling the project and
* its and-on revenue, unless owner has renounced ownership)
* ----------------------------------------------------------------------------
* The following function is restricted to the artist when a project is
* unlocked, and only callable by Admin ACL contract when a project is locked:
* - updateProjectDescription
* ----------------------------------------------------------------------------
* The following function is restricted to owner calling directly:
* - transferOwnership
* - renounceOwnership
* ----------------------------------------------------------------------------
* The following configuration variables are set at time of contract deployment,
* and not modifiable thereafter (immutable after the point of deployment):
* - (bool) autoApproveArtistSplitProposals
* ----------------------------------------------------------------------------
* Additional admin and artist privileged roles may be described on minters,
* registries, and other contracts that may interact with this core contract.
*/
contract GenArt721CoreV3_Engine is
ERC721_PackedHashSeed,
Ownable,
IDependencyRegistryCompatibleV0,
IManifold,
IGenArt721CoreContractV3_Engine,
IGenArt721CoreContractExposesHashSeed
{
using BytecodeStorageWriter for string;
using Bytes32Strings for bytes32;
using Strings for uint256;
using Strings for address;
uint256 constant ONE_HUNDRED = 100;
uint256 constant ONE_MILLION = 1_000_000;
uint24 constant ONE_MILLION_UINT24 = 1_000_000;
uint256 constant FOUR_WEEKS_IN_SECONDS = 2_419_200;
uint8 constant AT_CHARACTER_CODE = uint8(bytes1("@")); // 0x40
// numeric constants
uint256 constant MAX_PROVIDER_SECONDARY_SALES_BPS = 10000; // 10_000 BPS = 100%
uint256 constant ARTIST_MAX_SECONDARY_ROYALTY_PERCENTAGE = 95; // 95%
// This contract emits generic events that contain fields that indicate
// which parameter has been updated. This is sufficient for application
// state management, while also simplifying the contract and indexing code.
// This was done as an alternative to having custom events that emit what
// field-values have changed for each event, given that changed values can
// be introspected by indexers due to the design of this smart contract
// exposing these state changes via publicly viewable fields.
//
// The following fields are used to indicate which contract-level parameter
// has been updated in the `PlatformUpdated` event:
bytes32 constant FIELD_NEXT_PROJECT_ID = "nextProjectId";
bytes32 constant FIELD_NEW_PROJECTS_FORBIDDEN = "newProjectsForbidden";
bytes32 constant FIELD_DEFAULT_BASE_URI = "defaultBaseURI";
bytes32 constant FIELD_RANDOMIZER_ADDRESS = "randomizerAddress";
bytes32 constant FIELD_ARTBLOCKS_DEPENDENCY_REGISTRY_ADDRESS =
"dependencyRegistryAddress";
bytes32 constant FIELD_PROVIDER_SALES_ADDRESSES = "providerSalesAddresses";
bytes32 constant FIELD_PROVIDER_PRIMARY_SALES_PERCENTAGES =
"providerPrimaryPercentages";
bytes32 constant FIELD_PROVIDER_SECONDARY_SALES_BPS =
"providerSecondaryBPS";
// The following fields are used to indicate which project-level parameter
// has been updated in the `ProjectUpdated` event:
bytes32 constant FIELD_PROJECT_COMPLETED = "completed";
bytes32 constant FIELD_PROJECT_ACTIVE = "active";
bytes32 constant FIELD_PROJECT_ARTIST_ADDRESS = "artistAddress";
bytes32 constant FIELD_PROJECT_PAUSED = "paused";
bytes32 constant FIELD_PROJECT_CREATED = "created";
bytes32 constant FIELD_PROJECT_NAME = "name";
bytes32 constant FIELD_PROJECT_ARTIST_NAME = "artistName";
bytes32 constant FIELD_PROJECT_SECONDARY_MARKET_ROYALTY_PERCENTAGE =
"royaltyPercentage";
bytes32 constant FIELD_PROJECT_DESCRIPTION = "description";
bytes32 constant FIELD_PROJECT_WEBSITE = "website";
bytes32 constant FIELD_PROJECT_LICENSE = "license";
bytes32 constant FIELD_PROJECT_MAX_INVOCATIONS = "maxInvocations";
bytes32 constant FIELD_PROJECT_SCRIPT = "script";
bytes32 constant FIELD_PROJECT_SCRIPT_TYPE = "scriptType";
bytes32 constant FIELD_PROJECT_ASPECT_RATIO = "aspectRatio";
bytes32 constant FIELD_PROJECT_BASE_URI = "baseURI";
/// Dependency registry managed by Art Blocks
address public artblocksDependencyRegistryAddress;
/// current randomizer contract
IRandomizer_V3CoreBase public randomizerContract;
/// append-only array of all randomizer contract addresses ever used by
/// this contract
address[] private _historicalRandomizerAddresses;
/// admin ACL contract
IAdminACLV0 public adminACLContract;
struct Project {
uint24 invocations;
uint24 maxInvocations;
uint24 scriptCount;
// max uint64 ~= 1.8e19 sec ~= 570 billion years
uint64 completedTimestamp;
bool active;
bool paused;
string name;
string artist;
address descriptionAddress;
string website;
string license;
string projectBaseURI;
bytes32 scriptTypeAndVersion;
string aspectRatio;
// mapping from script index to address storing script in bytecode
mapping(uint256 => address) scriptBytecodeAddresses;
}
mapping(uint256 => Project) projects;
/// packed struct containing project financial information
struct ProjectFinance {
address payable additionalPayeePrimarySales;
// packed uint: max of 95, max uint8 = 255
uint8 secondaryMarketRoyaltyPercentage;
address payable additionalPayeeSecondarySales;
// packed uint: max of 100, max uint8 = 255
uint8 additionalPayeeSecondarySalesPercentage;
address payable artistAddress;
// packed uint: max of 100, max uint8 = 255
uint8 additionalPayeePrimarySalesPercentage;
}
// Project financials mapping
mapping(uint256 => ProjectFinance) projectIdToFinancials;
/// hash of artist's proposed payment updates to be approved by admin
mapping(uint256 => bytes32) public proposedArtistAddressesAndSplitsHash;
/// The render provider payment address for all primary sales revenues
/// (packed)
address payable public renderProviderPrimarySalesAddress;
/// Percentage of primary sales revenue allocated to the render provider
/// (packed)
// packed uint: max of 100, max uint8 = 255
uint8 private _renderProviderPrimarySalesPercentage = 10;
/// The platform provider payment address for all primary sales revenues
/// (packed)
address payable public platformProviderPrimarySalesAddress;
/// Percentage of primary sales revenue allocated to the platform provider
/// (packed)
// packed uint: max of 100, max uint8 = 255
uint8 private _platformProviderPrimarySalesPercentage = 10;
/// The render provider payment address for all secondary sales royalty
/// revenues
address payable public renderProviderSecondarySalesAddress;
/// Basis Points of secondary sales royalties allocated to the
/// render provider
uint256 public renderProviderSecondarySalesBPS = 250;
/// The platform provider payment address for all secondary sales royalty
/// revenues
address payable public platformProviderSecondarySalesAddress;
/// Basis Points of secondary sales royalties allocated to the
/// platform provider
uint256 public platformProviderSecondarySalesBPS = 250;
/// single minter allowed for this core contract
address public minterContract;
/// starting (initial) project ID on this contract
uint256 public immutable startingProjectId;
/// next project ID to be created
uint248 private _nextProjectId;
/// bool indicating if adding new projects is forbidden;
/// default behavior is to allow new projects
bool public newProjectsForbidden;
/// configuration variable (determined at time of deployment)
/// that determines whether or not admin approval^ should be required
/// to accept artist address change proposals, or if these proposals
/// should always auto-approve, as determined by the business process
/// requirements of the Engine partner using this contract.
///
/// ^does not apply in the case where contract-ownership itself is revoked
bool public immutable autoApproveArtistSplitProposals;
/// version & type of this core contract
bytes32 constant CORE_VERSION = "v3.1.4";
function coreVersion() external pure returns (string memory) {
return CORE_VERSION.toString();
}
bytes32 constant CORE_TYPE = "GenArt721CoreV3_Engine";
function coreType() external pure returns (string memory) {
return CORE_TYPE.toString();
}
/// default base URI to initialize all new project projectBaseURI values to
string public defaultBaseURI;
function _onlyNonZeroAddress(address _address) internal pure {
require(_address != address(0), "Must input non-zero address");
}
function _onlyNonEmptyString(string memory _string) internal pure {
require(bytes(_string).length != 0, "Must input non-empty string");
}
function _onlyValidTokenId(uint256 _tokenId) internal view {
require(_exists(_tokenId), "Token ID does not exist");
}
function _onlyValidProjectId(uint256 _projectId) internal view {
require(
(_projectId >= startingProjectId) && (_projectId < _nextProjectId),
"Project ID does not exist"
);
}
function _onlyUnlocked(uint256 _projectId) internal view {
// Note: calling `_projectUnlocked` enforces that the `_projectId`
// passed in is valid.`
require(_projectUnlocked(_projectId), "Only if unlocked");
}
function _onlyAdminACL(bytes4 _selector) internal {
require(
adminACLAllowed(msg.sender, address(this), _selector),
"Only Admin ACL allowed"
);
}
function _onlyArtist(uint256 _projectId) internal view {
require(
msg.sender == projectIdToFinancials[_projectId].artistAddress,
"Only artist"
);
}
function _onlyArtistOrAdminACL(
uint256 _projectId,
bytes4 _selector
) internal {
require(
msg.sender == projectIdToFinancials[_projectId].artistAddress ||
adminACLAllowed(msg.sender, address(this), _selector),
"Only artist or Admin ACL allowed"
);
}
/**
* This modifier allows the artist of a project to call a function if the
* owner of the contract has renounced ownership. This is to allow the
* contract to continue to function if the owner decides to renounce
* ownership.
*/
function _onlyAdminACLOrRenouncedArtist(
uint256 _projectId,
bytes4 _selector
) internal {
require(
adminACLAllowed(msg.sender, address(this), _selector) ||
(owner() == address(0) &&
msg.sender ==
projectIdToFinancials[_projectId].artistAddress),
"Only Admin ACL allowed, or artist if owner has renounced"
);
}
/**
* @notice Initializes contract.
* @param _tokenName Name of token.
* @param _tokenSymbol Token symbol.
* @param _randomizerContract Randomizer contract.
* @param _adminACLContract Address of admin access control contract, to be
* set as contract owner.
* @param _startingProjectId The initial next project ID.
* @param _autoApproveArtistSplitProposals Whether or not to always
* auto-approve proposed artist split updates.
* @dev _startingProjectId should be set to a value much, much less than
* max(uint248), but an explicit input type of `uint248` is used as it is
* safer to cast up to `uint256` than it is to cast down for the purposes
* of setting `_nextProjectId`.
*/
constructor(
string memory _tokenName,
string memory _tokenSymbol,
address _renderProviderAddress,
address _platformProviderAddress,
address _randomizerContract,
address _adminACLContract,
uint248 _startingProjectId,
bool _autoApproveArtistSplitProposals
) ERC721_PackedHashSeed(_tokenName, _tokenSymbol) {
_onlyNonZeroAddress(_renderProviderAddress);
_onlyNonZeroAddress(_platformProviderAddress);
_onlyNonZeroAddress(_randomizerContract);
_onlyNonZeroAddress(_adminACLContract);
// setup immutable `autoApproveArtistSplitProposals` config
autoApproveArtistSplitProposals = _autoApproveArtistSplitProposals;
// record contracts starting project ID
// casting-up is safe
startingProjectId = uint256(_startingProjectId);
_updateProviderSalesAddresses(
_renderProviderAddress,
_renderProviderAddress,
_platformProviderAddress,
_platformProviderAddress
);
_updateRandomizerAddress(_randomizerContract);
// set AdminACL management contract as owner
_transferOwnership(_adminACLContract);
// initialize default base URI
_updateDefaultBaseURI(
string.concat(
"https://token.artblocks.io/",
address(this).toHexString(),
"/"
)
);
// initialize next project ID
_nextProjectId = _startingProjectId;
emit PlatformUpdated(FIELD_NEXT_PROJECT_ID);
// @dev follow-on action: This contract does not self-register. A core
// registry owner must register contract in a subsequent call.
}
/**
* @notice Mints a token from project `_projectId` and sets the
* token's owner to `_to`. Hash may or may not be assigned to the token
* during the mint transaction, depending on the randomizer contract.
* @param _to Address to be the minted token's owner.
* @param _projectId Project ID to mint a token on.
* @param _by Purchaser of minted token.
* @return _tokenId The ID of the minted token.
* @dev sender must be the allowed minterContract
* @dev name of function is optimized for gas usage
*/
function mint_Ecf(
address _to,
uint256 _projectId,
address _by
) external returns (uint256 _tokenId) {
// CHECKS
require(msg.sender == minterContract, "Must mint from minter contract");
Project storage project = projects[_projectId];
// load invocations into memory
uint24 invocationsBefore = project.invocations;
uint24 invocationsAfter;
unchecked {
// invocationsBefore guaranteed <= maxInvocations <= 1_000_000,
// 1_000_000 << max uint24, so no possible overflow
invocationsAfter = invocationsBefore + 1;
}
uint24 maxInvocations = project.maxInvocations;
require(
invocationsBefore < maxInvocations,
"Must not exceed max invocations"
);
require(
project.active ||
_by == projectIdToFinancials[_projectId].artistAddress,
"Project must exist and be active"
);
require(
!project.paused ||
_by == projectIdToFinancials[_projectId].artistAddress,
"Purchases are paused."
);
// EFFECTS
// increment project's invocations
project.invocations = invocationsAfter;
uint256 thisTokenId;
unchecked {
// invocationsBefore is uint24 << max uint256. In production use,
// _projectId * ONE_MILLION must be << max uint256, otherwise
// tokenIdToProjectId function become invalid.
// Therefore, no risk of overflow
thisTokenId = (_projectId * ONE_MILLION) + invocationsBefore;
}
// mark project as completed if hit max invocations
if (invocationsAfter == maxInvocations) {
_completeProject(_projectId);
}
// INTERACTIONS
_mint(_to, thisTokenId);
// token hash is updated by the randomizer contract on V3
randomizerContract.assignTokenHash(thisTokenId);
// Do not need to also log `projectId` in event, as the `projectId` for
// a given token can be derived from the `tokenId` with:
// projectId = tokenId / 1_000_000
emit Mint(_to, thisTokenId);
return thisTokenId;
}
/**
* @notice Sets the hash seed for a given token ID `_tokenId`.
* May only be called by the current randomizer contract.
* May only be called for tokens that have not already been assigned a
* non-zero hash.
* @param _tokenId Token ID to set the hash for.
* @param _hashSeed Hash seed to set for the token ID. Only last 12 bytes
* will be used.
* @dev gas-optimized function name because called during mint sequence
* @dev if a separate event is required when the token hash is set, e.g.
* for indexing purposes, it must be emitted by the randomizer. This is to
* minimize gas when minting.
*/
function setTokenHash_8PT(uint256 _tokenId, bytes32 _hashSeed) external {
_onlyValidTokenId(_tokenId);
OwnerAndHashSeed storage ownerAndHashSeed = _ownersAndHashSeeds[
_tokenId
];
require(
msg.sender == address(randomizerContract),
"Only randomizer may set"
);
require(
ownerAndHashSeed.hashSeed == bytes12(0),
"Token hash already set"
);
require(_hashSeed != bytes12(0), "No zero hash seed");
ownerAndHashSeed.hashSeed = bytes12(_hashSeed);
}
/**
* @notice Allows owner (AdminACL) to revoke ownership of the contract.
* Note that the contract is intended to continue to function after the
* owner renounces ownership, but no new projects will be able to be added.
* Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the
* owner/AdminACL contract. The same is true for any dependent contracts
* that also integrate with the owner/AdminACL contract (e.g. potentially
* minter suite contracts, registry contracts, etc.).
* After renouncing ownership, artists will be in control of updates to
* their payment addresses and splits (see modifier
* onlyAdminACLOrRenouncedArtist`).
* While there is no currently intended reason to call this method based on
* typical Engine partner business practices, this method exists to allow
* artists to continue to maintain the limited set of contract
* functionality that exists post-project-lock in an environment in which
* there is no longer an admin maintaining this smart contract.
* @dev This function is intended to be called directly by the AdminACL,
* not by an address allowed by the AdminACL contract.
*/
function renounceOwnership() public override onlyOwner {
// broadcast that new projects are no longer allowed (if not already)
_forbidNewProjects();
// renounce ownership viw Ownable
Ownable.renounceOwnership();
}
/**
* @notice Updates reference to Art Blocks Dependency Registry contract.
* @param _artblocksDependencyRegistryAddress Address of new Dependency
* Registry.
*/
function updateArtblocksDependencyRegistryAddress(
address _artblocksDependencyRegistryAddress
) external {
_onlyAdminACL(this.updateArtblocksDependencyRegistryAddress.selector);
_onlyNonZeroAddress(_artblocksDependencyRegistryAddress);
artblocksDependencyRegistryAddress = _artblocksDependencyRegistryAddress;
emit PlatformUpdated(FIELD_ARTBLOCKS_DEPENDENCY_REGISTRY_ADDRESS);
}
/**
* @notice Updates sales addresses for the platform and render providers to
* the input parameters.
* @param _renderProviderPrimarySalesAddress Address of new primary sales
* payment address.
* @param _renderProviderSecondarySalesAddress Address of new secondary sales
* payment address.
* @param _platformProviderPrimarySalesAddress Address of new primary sales
* payment address.
* @param _platformProviderSecondarySalesAddress Address of new secondary sales
* payment address.
*/
function updateProviderSalesAddresses(
address payable _renderProviderPrimarySalesAddress,
address payable _renderProviderSecondarySalesAddress,
address payable _platformProviderPrimarySalesAddress,
address payable _platformProviderSecondarySalesAddress
) external {
_onlyAdminACL(this.updateProviderSalesAddresses.selector);
_onlyNonZeroAddress(_renderProviderPrimarySalesAddress);
_onlyNonZeroAddress(_renderProviderSecondarySalesAddress);
_onlyNonZeroAddress(_platformProviderPrimarySalesAddress);
_onlyNonZeroAddress(_platformProviderSecondarySalesAddress);
_updateProviderSalesAddresses(
_renderProviderPrimarySalesAddress,
_renderProviderSecondarySalesAddress,
_platformProviderPrimarySalesAddress,
_platformProviderSecondarySalesAddress
);
}
/**
* @notice Updates the render and platform provider primary sales revenue percentage to
* the provided inputs.
* @param renderProviderPrimarySalesPercentage_ New primary sales revenue % for the render provider
* @param platformProviderPrimarySalesPercentage_ New primary sales revenue % for the platform provider
* percentage.
*/
function updateProviderPrimarySalesPercentages(
uint256 renderProviderPrimarySalesPercentage_,
uint256 platformProviderPrimarySalesPercentage_
) external {
_onlyAdminACL(this.updateProviderPrimarySalesPercentages.selector);
// Validate that the sum of the proposed %s, does not exceed 100%.
require(
(renderProviderPrimarySalesPercentage_ +
platformProviderPrimarySalesPercentage_) <= ONE_HUNDRED,
"Max sum of ONE_HUNDRED %"
);
// Casting to `uint8` here is safe due check above, which does not allow
// overflow as of solidity version ^0.8.0.
_renderProviderPrimarySalesPercentage = uint8(
renderProviderPrimarySalesPercentage_
);
_platformProviderPrimarySalesPercentage = uint8(
platformProviderPrimarySalesPercentage_
);
emit PlatformUpdated(FIELD_PROVIDER_PRIMARY_SALES_PERCENTAGES);
}
/**
* @notice Updates render and platform provider secondary sales royalty Basis Points to
* the provided inputs.
* @param _renderProviderSecondarySalesBPS New secondary sales royalty Basis
* points.
* @param _platformProviderSecondarySalesBPS New secondary sales royalty Basis
* points.
* @dev Due to secondary royalties being ultimately enforced via social
* consensus, no hard upper limit is imposed on the BPS value, other than
* <= 100% royalty, which would not make mathematical sense. Realistically,
* changing this value is expected to either never occur, or be a rare
* occurrence.
*/
function updateProviderSecondarySalesBPS(
uint256 _renderProviderSecondarySalesBPS,
uint256 _platformProviderSecondarySalesBPS
) external {
_onlyAdminACL(this.updateProviderSecondarySalesBPS.selector);
// Validate that the sum of the proposed provider BPS, does not exceed 10_000 BPS.
require(
(_renderProviderSecondarySalesBPS +
_platformProviderSecondarySalesBPS) <=
MAX_PROVIDER_SECONDARY_SALES_BPS,
"Over max sum of BPS"
);
renderProviderSecondarySalesBPS = _renderProviderSecondarySalesBPS;
platformProviderSecondarySalesBPS = _platformProviderSecondarySalesBPS;
emit PlatformUpdated(FIELD_PROVIDER_SECONDARY_SALES_BPS);
}
/**
* @notice Updates minter to `_address`.
* @param _address Address of new minter.
*/
function updateMinterContract(address _address) external {
_onlyAdminACL(this.updateMinterContract.selector);
_onlyNonZeroAddress(_address);
minterContract = _address;
emit MinterUpdated(_address);
}
/**
* @notice Updates randomizer to `_randomizerAddress`.
* @param _randomizerAddress Address of new randomizer.
*/
function updateRandomizerAddress(address _randomizerAddress) external {
_onlyAdminACL(this.updateRandomizerAddress.selector);
_onlyNonZeroAddress(_randomizerAddress);
_updateRandomizerAddress(_randomizerAddress);
}
/**
* @notice Toggles project `_projectId` as active/inactive.
* @param _projectId Project ID to be toggled.
*/
function toggleProjectIsActive(uint256 _projectId) external {
_onlyAdminACL(this.toggleProjectIsActive.selector);
_onlyValidProjectId(_projectId);
projects[_projectId].active = !projects[_projectId].active;
emit ProjectUpdated(_projectId, FIELD_PROJECT_ACTIVE);
}
/**
* @notice Artist proposes updated set of artist address, additional payee
* addresses, and percentage splits for project `_projectId`. Addresses and
* percentages do not have to all be changed, but they must all be defined
* as a complete set.
* Note that if the artist is only proposing a change to the payee percentage
* splits, without modifying the payee addresses, the proposal will be
* automatically approved and the new splits will become active immediately.
* Automatic approval will also be granted if the artist is only removing
* additional payee addresses, without adding any new ones.
* Also note that if `autoApproveArtistSplitProposals` is true, proposals
* will always be auto-approved, regardless of what is being changed.
* Also note that if the artist is proposing sending funds to the zero
* address, this function will revert and the proposal will not be created.
* @param _projectId Project ID.
* @param _artistAddress Artist address that controls the project, and may
* receive payments.
* @param _additionalPayeePrimarySales Address that may receive a
* percentage split of the artist's primary sales revenue.
* @param _additionalPayeePrimarySalesPercentage Percent of artist's
* portion of primary sale revenue that will be split to address
* `_additionalPayeePrimarySales`.
* @param _additionalPayeeSecondarySales Address that may receive a percentage
* split of the secondary sales royalties.
* @param _additionalPayeeSecondarySalesPercentage Percent of artist's portion
* of secondary sale royalties that will be split to address
* `_additionalPayeeSecondarySales`.
* @dev `_artistAddress` must be a valid address (non-zero-address), but it
* is intentionally allowable for `_additionalPayee{Primary,Secondaary}Sales`
* and their associated percentages to be zero'd out by the controlling artist.
*/
function proposeArtistPaymentAddressesAndSplits(
uint256 _projectId,
address payable _artistAddress,
address payable _additionalPayeePrimarySales,
uint256 _additionalPayeePrimarySalesPercentage,
address payable _additionalPayeeSecondarySales,
uint256 _additionalPayeeSecondarySalesPercentage
) external {
_onlyValidProjectId(_projectId);
_onlyArtist(_projectId);
_onlyNonZeroAddress(_artistAddress);
ProjectFinance storage projectFinance = projectIdToFinancials[
_projectId
];
// checks
require(
_additionalPayeePrimarySalesPercentage <= ONE_HUNDRED &&
_additionalPayeeSecondarySalesPercentage <= ONE_HUNDRED,
"Max of 100%"
);
require(
_additionalPayeePrimarySalesPercentage == 0 ||
_additionalPayeePrimarySales != address(0),
"Primary payee is zero address"
);
require(
_additionalPayeeSecondarySalesPercentage == 0 ||
_additionalPayeeSecondarySales != address(0),
"Secondary payee is zero address"
);
// effects
// emit event for off-chain indexing
// note: always emit a proposal event, even in the pathway of
// automatic approval, to simplify indexing expectations
emit ProposedArtistAddressesAndSplits(
_projectId,
_artistAddress,
_additionalPayeePrimarySales,
_additionalPayeePrimarySalesPercentage,
_additionalPayeeSecondarySales,
_additionalPayeeSecondarySalesPercentage
);
// automatically accept if no proposed addresses modifications, or if
// the proposal only removes payee addresses, or if contract is set to
// always auto-approve.
// store proposal hash on-chain, only if not automatic accept
bool automaticAccept = autoApproveArtistSplitProposals;
if (!automaticAccept) {
// block scope to avoid stack too deep error
bool artistUnchanged = _artistAddress ==
projectFinance.artistAddress;
bool additionalPrimaryUnchangedOrRemoved = (_additionalPayeePrimarySales ==
projectFinance.additionalPayeePrimarySales) ||
(_additionalPayeePrimarySales == address(0));
bool additionalSecondaryUnchangedOrRemoved = (_additionalPayeeSecondarySales ==
projectFinance.additionalPayeeSecondarySales) ||
(_additionalPayeeSecondarySales == address(0));
automaticAccept =
artistUnchanged &&
additionalPrimaryUnchangedOrRemoved &&
additionalSecondaryUnchangedOrRemoved;
}
if (automaticAccept) {
// clear any previously proposed values
proposedArtistAddressesAndSplitsHash[_projectId] = bytes32(0);
// update storage
// artist address can change during automatic accept if
// autoApproveArtistSplitProposals is true
projectFinance.artistAddress = _artistAddress;
projectFinance
.additionalPayeePrimarySales = _additionalPayeePrimarySales;
// safe to cast as uint8 as max is 100%, max uint8 is 255
projectFinance.additionalPayeePrimarySalesPercentage = uint8(
_additionalPayeePrimarySalesPercentage
);
projectFinance
.additionalPayeeSecondarySales = _additionalPayeeSecondarySales;
// safe to cast as uint8 as max is 100%, max uint8 is 255
projectFinance.additionalPayeeSecondarySalesPercentage = uint8(
_additionalPayeeSecondarySalesPercentage
);
// emit event for off-chain indexing
emit AcceptedArtistAddressesAndSplits(_projectId);
} else {
proposedArtistAddressesAndSplitsHash[_projectId] = keccak256(
abi.encode(
_artistAddress,
_additionalPayeePrimarySales,
_additionalPayeePrimarySalesPercentage,
_additionalPayeeSecondarySales,
_additionalPayeeSecondarySalesPercentage
)
);
}
}
/**
* @notice Admin accepts a proposed set of updated artist address,
* additional payee addresses, and percentage splits for project
* `_projectId`. Addresses and percentages do not have to all be changed,
* but they must all be defined as a complete set.
* @param _projectId Project ID.
* @param _artistAddress Artist address that controls the project, and may
* receive payments.
* @param _additionalPayeePrimarySales Address that may receive a
* percentage split of the artist's primary sales revenue.
* @param _additionalPayeePrimarySalesPercentage Percent of artist's
* portion of primary sale revenue that will be split to address
* `_additionalPayeePrimarySales`.
* @param _additionalPayeeSecondarySales Address that may receive a percentage
* split of the secondary sales royalties.
* @param _additionalPayeeSecondarySalesPercentage Percent of artist's portion
* of secondary sale royalties that will be split to address
* `_additionalPayeeSecondarySales`.
* @dev this must be called by the Admin ACL contract, and must only accept
* the most recent proposed values for a given project (validated on-chain
* by comparing the hash of the proposed and accepted values).
* @dev `_artistAddress` must be a valid address (non-zero-address), but it
* is intentionally allowable for `_additionalPayee{Primary,Secondaary}Sales`
* and their associated percentages to be zero'd out by the controlling artist.
*/
function adminAcceptArtistAddressesAndSplits(
uint256 _projectId,
address payable _artistAddress,
address payable _additionalPayeePrimarySales,
uint256 _additionalPayeePrimarySalesPercentage,
address payable _additionalPayeeSecondarySales,
uint256 _additionalPayeeSecondarySalesPercentage
) external {
_onlyValidProjectId(_projectId);
_onlyAdminACLOrRenouncedArtist(
_projectId,
this.adminAcceptArtistAddressesAndSplits.selector
);
_onlyNonZeroAddress(_artistAddress);
// checks
require(
proposedArtistAddressesAndSplitsHash[_projectId] ==
keccak256(
abi.encode(
_artistAddress,
_additionalPayeePrimarySales,
_additionalPayeePrimarySalesPercentage,
_additionalPayeeSecondarySales,
_additionalPayeeSecondarySalesPercentage
)
),
"Must match artist proposal"
);
// effects
ProjectFinance storage projectFinance = projectIdToFinancials[
_projectId
];
projectFinance.artistAddress = _artistAddress;
projectFinance
.additionalPayeePrimarySales = _additionalPayeePrimarySales;
projectFinance.additionalPayeePrimarySalesPercentage = uint8(
_additionalPayeePrimarySalesPercentage
);
projectFinance
.additionalPayeeSecondarySales = _additionalPayeeSecondarySales;
projectFinance.additionalPayeeSecondarySalesPercentage = uint8(
_additionalPayeeSecondarySalesPercentage
);
// clear proposed values
proposedArtistAddressesAndSplitsHash[_projectId] = bytes32(0);
// emit event for off-chain indexing
emit AcceptedArtistAddressesAndSplits(_projectId);
}
/**
* @notice Updates artist of project `_projectId` to `_artistAddress`.
* This is to only be used in the event that the artist address is
* compromised or sanctioned.
* @param _projectId Project ID.
* @param _artistAddress New artist address.
*/
function updateProjectArtistAddress(
uint256 _projectId,
address payable _artistAddress
) external {
_onlyValidProjectId(_projectId);
_onlyAdminACLOrRenouncedArtist(
_projectId,
this.updateProjectArtistAddress.selector
);
_onlyNonZeroAddress(_artistAddress);
projectIdToFinancials[_projectId].artistAddress = _artistAddress;
emit ProjectUpdated(_projectId, FIELD_PROJECT_ARTIST_ADDRESS);
}
/**
* @notice Toggles paused state of project `_projectId`.
* @param _projectId Project ID to be toggled.
*/
function toggleProjectIsPaused(uint256 _projectId) external {
_onlyArtist(_projectId);
projects[_projectId].paused = !projects[_projectId].paused;
emit ProjectUpdated(_projectId, FIELD_PROJECT_PAUSED);
}
/**
* @notice Adds new project `_projectName` by `_artistAddress`.
* @param _projectName Project name.
* @param _artistAddress Artist's address.
* @dev token price now stored on minter
*/
function addProject(
string memory _projectName,
address payable _artistAddress
) external {
_onlyAdminACL(this.addProject.selector);
_onlyNonEmptyString(_projectName);
_onlyNonZeroAddress(_artistAddress);
require(!newProjectsForbidden, "New projects forbidden");
uint256 projectId = _nextProjectId;
projectIdToFinancials[projectId].artistAddress = _artistAddress;
projects[projectId].name = _projectName;
projects[projectId].paused = true;
projects[projectId].maxInvocations = ONE_MILLION_UINT24;
projects[projectId].projectBaseURI = defaultBaseURI;
_nextProjectId = uint248(projectId) + 1;
emit ProjectUpdated(projectId, FIELD_PROJECT_CREATED);
}
/**
* @notice Forever forbids new projects from being added to this contract.
*/
function forbidNewProjects() external {
_onlyAdminACL(this.forbidNewProjects.selector);
require(!newProjectsForbidden, "Already forbidden");
_forbidNewProjects();
}
/**
* @notice Updates name of project `_projectId` to be `_projectName`.
* @param _projectId Project ID.
* @param _projectName New project name.
*/
function updateProjectName(
uint256 _projectId,
string memory _projectName
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(_projectId, this.updateProjectName.selector);
_onlyNonEmptyString(_projectName);
projects[_projectId].name = _projectName;
emit ProjectUpdated(_projectId, FIELD_PROJECT_NAME);
}
/**
* @notice Updates artist name for project `_projectId` to be
* `_projectArtistName`.
* @param _projectId Project ID.
* @param _projectArtistName New artist name.
*/
function updateProjectArtistName(
uint256 _projectId,
string memory _projectArtistName
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(
_projectId,
this.updateProjectArtistName.selector
);
_onlyNonEmptyString(_projectArtistName);
projects[_projectId].artist = _projectArtistName;
emit ProjectUpdated(_projectId, FIELD_PROJECT_ARTIST_NAME);
}
/**
* @notice Updates artist secondary market royalties for project
* `_projectId` to be `_secondMarketRoyalty` percent.
* This DOES NOT include the secondary market royalty percentages collected
* by the issuing platform; it is only the total percentage of royalties
* that will be split to artist and additionalSecondaryPayee.
* @param _projectId Project ID.
* @param _secondMarketRoyalty Percent of secondary sales revenue that will
* be split to artist and additionalSecondaryPayee. This must be less than
* or equal to ARTIST_MAX_SECONDARY_ROYALTY_PERCENTAGE percent.
*/
function updateProjectSecondaryMarketRoyaltyPercentage(
uint256 _projectId,
uint256 _secondMarketRoyalty
) external {
_onlyArtist(_projectId);
require(
_secondMarketRoyalty <= ARTIST_MAX_SECONDARY_ROYALTY_PERCENTAGE,
"Over max percent"
);
projectIdToFinancials[_projectId]
.secondaryMarketRoyaltyPercentage = uint8(_secondMarketRoyalty);
emit ProjectUpdated(
_projectId,
FIELD_PROJECT_SECONDARY_MARKET_ROYALTY_PERCENTAGE
);
}
/**
* @notice Updates description of project `_projectId`.
* Only artist may call when unlocked, only admin may call when locked.
* Note: The BytecodeStorage library is used to store the description to
* reduce initial upload cost, however, even minor edits will require an
* expensive, entirely new bytecode storage contract to be deployed instead
* of relatively cheap updates to already-warm storage slots. This results
* in an increased gas cost for minor edits to the description after the
* initial upload, but an overall decrease in gas cost for projects with
* less than ~3-5 edits (depending on the length of the description).
* @param _projectId Project ID.
* @param _projectDescription New project description.
*/
function updateProjectDescription(
uint256 _projectId,
string memory _projectDescription
) external {
// checks
require(
_projectUnlocked(_projectId)
? msg.sender == projectIdToFinancials[_projectId].artistAddress
: adminACLAllowed(
msg.sender,
address(this),
this.updateProjectDescription.selector
),
"Only artist when unlocked, owner when locked"
);
// effects
// store description in contract bytecode, replacing reference address from
// the old storage description with the newly created one
projects[_projectId].descriptionAddress = _projectDescription
.writeToBytecode();
emit ProjectUpdated(_projectId, FIELD_PROJECT_DESCRIPTION);
}
/**
* @notice Updates website of project `_projectId` to be `_projectWebsite`.
* @param _projectId Project ID.
* @param _projectWebsite New project website.
* @dev It is intentionally allowed for this to be set to the empty string.
*/
function updateProjectWebsite(
uint256 _projectId,
string memory _projectWebsite
) external {
_onlyArtist(_projectId);
projects[_projectId].website = _projectWebsite;
emit ProjectUpdated(_projectId, FIELD_PROJECT_WEBSITE);
}
/**
* @notice Updates license for project `_projectId`.
* @param _projectId Project ID.
* @param _projectLicense New project license.
*/
function updateProjectLicense(
uint256 _projectId,
string memory _projectLicense
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(_projectId, this.updateProjectLicense.selector);
_onlyNonEmptyString(_projectLicense);
projects[_projectId].license = _projectLicense;
emit ProjectUpdated(_projectId, FIELD_PROJECT_LICENSE);
}
/**
* @notice Updates maximum invocations for project `_projectId` to
* `_maxInvocations`. Maximum invocations may only be decreased by the
* artist, and must be greater than or equal to current invocations.
* New projects are created with maximum invocations of 1 million by
* default.
* @param _projectId Project ID.
* @param _maxInvocations New maximum invocations.
*/
function updateProjectMaxInvocations(
uint256 _projectId,
uint24 _maxInvocations
) external {
_onlyArtist(_projectId);
// CHECKS
Project storage project = projects[_projectId];
uint256 _invocations = project.invocations;
require(
(_maxInvocations < project.maxInvocations),
"Only maxInvocations decrease"
);
require(_maxInvocations >= _invocations, "Only gte invocations");
// EFFECTS
project.maxInvocations = _maxInvocations;
emit ProjectUpdated(_projectId, FIELD_PROJECT_MAX_INVOCATIONS);
// register completed timestamp if action completed the project
if (_maxInvocations == _invocations) {
_completeProject(_projectId);
}
}
/**
* @notice Adds a script to project `_projectId`.
* @param _projectId Project to be updated.
* @param _script Script to be added. Required to be a non-empty string,
* but no further validation is performed.
*/
function addProjectScript(
uint256 _projectId,
string memory _script
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(_projectId, this.addProjectScript.selector);
_onlyNonEmptyString(_script);
Project storage project = projects[_projectId];
// store script in contract bytecode
project.scriptBytecodeAddresses[project.scriptCount] = _script
.writeToBytecode();
project.scriptCount = project.scriptCount + 1;
emit ProjectUpdated(_projectId, FIELD_PROJECT_SCRIPT);
}
/**
* @notice Updates script for project `_projectId` at script ID `_scriptId`.
* @param _projectId Project to be updated.
* @param _scriptId Script ID to be updated.
* @param _script The updated script value. Required to be a non-empty
* string, but no further validation is performed.
*/
function updateProjectScript(
uint256 _projectId,
uint256 _scriptId,
string memory _script
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(_projectId, this.updateProjectScript.selector);
_onlyNonEmptyString(_script);
Project storage project = projects[_projectId];
require(_scriptId < project.scriptCount, "scriptId out of range");
// store script in contract bytecode, replacing reference address from
// the old storage contract with the newly created one
project.scriptBytecodeAddresses[_scriptId] = _script.writeToBytecode();
emit ProjectUpdated(_projectId, FIELD_PROJECT_SCRIPT);
}
/**
* @notice Removes last script from project `_projectId`.
* @param _projectId Project to be updated.
*/
function removeProjectLastScript(uint256 _projectId) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(
_projectId,
this.removeProjectLastScript.selector
);
Project storage project = projects[_projectId];
require(project.scriptCount > 0, "No scripts to remove");
// delete reference to old storage contract address
delete project.scriptBytecodeAddresses[project.scriptCount - 1];
unchecked {
project.scriptCount = project.scriptCount - 1;
}
emit ProjectUpdated(_projectId, FIELD_PROJECT_SCRIPT);
}
/**
* @notice Updates script type for project `_projectId`.
* @param _projectId Project to be updated.
* @param _scriptTypeAndVersion Script type and version e.g. "p5js@1.0.0",
* as bytes32 encoded string.
*/
function updateProjectScriptType(
uint256 _projectId,
bytes32 _scriptTypeAndVersion
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(
_projectId,
this.updateProjectScriptType.selector
);
Project storage project = projects[_projectId];
// require exactly one @ symbol in _scriptTypeAndVersion
require(
_scriptTypeAndVersion.containsExactCharacterQty(
AT_CHARACTER_CODE,
uint8(1)
),
"must contain exactly one @"
);
project.scriptTypeAndVersion = _scriptTypeAndVersion;
emit ProjectUpdated(_projectId, FIELD_PROJECT_SCRIPT_TYPE);
}
/**
* @notice Updates project's aspect ratio.
* @param _projectId Project to be updated.
* @param _aspectRatio Aspect ratio to be set. Intended to be string in the
* format of a decimal, e.g. "1" for square, "1.77777778" for 16:9, etc.,
* allowing for a maximum of 10 digits and one (optional) decimal separator.
*/
function updateProjectAspectRatio(
uint256 _projectId,
string memory _aspectRatio
) external {
_onlyUnlocked(_projectId);
_onlyArtistOrAdminACL(
_projectId,
this.updateProjectAspectRatio.selector
);
_onlyNonEmptyString(_aspectRatio);
// Perform more detailed input validation for aspect ratio.
bytes memory aspectRatioBytes = bytes(_aspectRatio);
uint256 bytesLength = aspectRatioBytes.length;
require(bytesLength <= 11, "Aspect ratio format too long");
bool hasSeenDecimalSeparator = false;
bool hasSeenNumber = false;
for (uint256 i; i < bytesLength; i++) {
bytes1 character = aspectRatioBytes[i];
// Allow as many #s as desired.
if (character >= 0x30 && character <= 0x39) {
// 9-0
// We need to ensure there is at least 1 `9-0` occurrence.
hasSeenNumber = true;
continue;
}
if (character == 0x2E) {
// .
// Allow no more than 1 `.` occurrence.
if (!hasSeenDecimalSeparator) {
hasSeenDecimalSeparator = true;
continue;
}
}
revert("Improperly formatted aspect ratio");
}
require(hasSeenNumber, "Aspect ratio has no numbers");
projects[_projectId].aspectRatio = _aspectRatio;
emit ProjectUpdated(_projectId, FIELD_PROJECT_ASPECT_RATIO);
}
/**
* @notice Updates base URI for project `_projectId` to `_newBaseURI`.
* This is the controlling base URI for all tokens in the project. The
* contract-level defaultBaseURI is only used when initializing new
* projects.
* @param _projectId Project to be updated.
* @param _newBaseURI New base URI.
*/
function updateProjectBaseURI(
uint256 _projectId,
string memory _newBaseURI
) external {
_onlyArtist(_projectId);
_onlyNonEmptyString(_newBaseURI);
projects[_projectId].projectBaseURI = _newBaseURI;
emit ProjectUpdated(_projectId, FIELD_PROJECT_BASE_URI);
}
/**
* @notice Updates default base URI to `_defaultBaseURI`. The
* contract-level defaultBaseURI is only used when initializing new
* projects. Token URIs are determined by their project's `projectBaseURI`.
* @param _defaultBaseURI New default base URI.
*/
function updateDefaultBaseURI(string memory _defaultBaseURI) external {
_onlyAdminACL(this.updateDefaultBaseURI.selector);
_onlyNonEmptyString(_defaultBaseURI);
_updateDefaultBaseURI(_defaultBaseURI);
}
/**
* @notice Next project ID to be created on this contract.
* @return uint256 Next project ID.
*/
function nextProjectId() external view returns (uint256) {
return _nextProjectId;
}
/**
* @notice Returns token hash for token ID `_tokenId`. Returns null if hash
* has not been set.
* @param _tokenId Token ID to be queried.
* @return bytes32 Token hash.
* @dev token hash is the keccak256 hash of the stored hash seed
*/
function tokenIdToHash(uint256 _tokenId) external view returns (bytes32) {
bytes12 _hashSeed = _ownersAndHashSeeds[_tokenId].hashSeed;
if (_hashSeed == 0) {
return 0;
}
return keccak256(abi.encode(_hashSeed));
}
/**
* @notice Returns token hash **seed** for token ID `_tokenId`. Returns
* null if hash seed has not been set. The hash seed id the bytes12 value
* which is hashed to produce the token hash.
* @param _tokenId Token ID to be queried.
* @return bytes12 Token hash seed.
* @dev token hash seed is keccak256 hashed to give the token hash
*/
function tokenIdToHashSeed(
uint256 _tokenId
) external view returns (bytes12) {
return _ownersAndHashSeeds[_tokenId].hashSeed;
}
/**
* @notice View function returning the render provider portion of
* primary sales, in percent.
* @return uint256 The render provider portion of primary sales,
* in percent.
*/
function renderProviderPrimarySalesPercentage()
external
view
returns (uint256)
{
return _renderProviderPrimarySalesPercentage;
}
/**
* @notice View function returning the platform provider portion of
* primary sales, in percent.
* @return uint256 The platform provider portion of primary sales,
* in percent.
*/
function platformProviderPrimarySalesPercentage()
external
view
returns (uint256)
{
return _platformProviderPrimarySalesPercentage;
}
/**
* @notice View function returning Artist's address for project
* `_projectId`.
* @param _projectId Project ID to be queried.
* @return address Artist's address.
*/
function projectIdToArtistAddress(
uint256 _projectId
) external view returns (address payable) {
return projectIdToFinancials[_projectId].artistAddress;
}
/**
* @notice View function returning Artist's secondary market royalty
* percentage for project `_projectId`.
* This does not include render/platform providers portions of secondary
* market royalties.
* @param _projectId Project ID to be queried.
* @return uint256 Artist's secondary market royalty percentage.
*/
function projectIdToSecondaryMarketRoyaltyPercentage(
uint256 _projectId
) external view returns (uint256) {
return
projectIdToFinancials[_projectId].secondaryMarketRoyaltyPercentage;
}
/**
* @notice View function returning Artist's additional payee address for
* primary sales, for project `_projectId`.
* @param _projectId Project ID to be queried.
* @return address Artist's additional payee address for primary sales.
*/
function projectIdToAdditionalPayeePrimarySales(
uint256 _projectId
) external view returns (address payable) {
return projectIdToFinancials[_projectId].additionalPayeePrimarySales;
}
/**
* @notice View function returning Artist's additional payee primary sales
* percentage, for project `_projectId`.
* @param _projectId Project ID to be queried.
* @return uint256 Artist's additional payee primary sales percentage.
*/
function projectIdToAdditionalPayeePrimarySalesPercentage(
uint256 _projectId
) external view returns (uint256) {
return
projectIdToFinancials[_projectId]
.additionalPayeePrimarySalesPercentage;
}
/**
* @notice View function returning Artist's additional payee address for
* secondary sales, for project `_projectId`.
* @param _projectId Project ID to be queried.
* @return address payable Artist's additional payee address for secondary
* sales.
*/
function projectIdToAdditionalPayeeSecondarySales(
uint256 _projectId
) external view returns (address payable) {
return projectIdToFinancials[_projectId].additionalPayeeSecondarySales;
}
/**
* @notice View function returning Artist's additional payee secondary
* sales percentage, for project `_projectId`.
* @param _projectId Project ID to be queried.
* @return uint256 Artist's additional payee secondary sales percentage.
*/
function projectIdToAdditionalPayeeSecondarySalesPercentage(
uint256 _projectId
) external view returns (uint256) {
return
projectIdToFinancials[_projectId]
.additionalPayeeSecondarySalesPercentage;
}
/**
* @notice Returns project details for project `_projectId`.
* @param _projectId Project to be queried.
* @return projectName Name of project
* @return artist Artist of project
* @return description Project description
* @return website Project website
* @return license Project license
* @dev this function was named projectDetails prior to V3 core contract.
*/
function projectDetails(
uint256 _projectId
)
external
view
returns (
string memory projectName,
string memory artist,
string memory description,
string memory website,
string memory license
)
{
Project storage project = projects[_projectId];
projectName = project.name;
artist = project.artist;
address projectDescriptionBytecodeAddress = project.descriptionAddress;
if (projectDescriptionBytecodeAddress == address(0)) {
description = "";
} else {
description = _readFromBytecode(projectDescriptionBytecodeAddress);
}
website = project.website;
license = project.license;
}
/**
* @notice Returns project state data for project `_projectId`.
* @param _projectId Project to be queried
* @return invocations Current number of invocations
* @return maxInvocations Maximum allowed invocations
* @return active Boolean representing if project is currently active
* @return paused Boolean representing if project is paused
* @return completedTimestamp zero if project not complete, otherwise
* timestamp of project completion.
* @return locked Boolean representing if project is locked
* @dev price and currency info are located on minter contracts
*/
function projectStateData(
uint256 _projectId
)
external
view
returns (
uint256 invocations,
uint256 maxInvocations,
bool active,
bool paused,
uint256 completedTimestamp,
bool locked
)
{
Project storage project = projects[_projectId];
invocations = project.invocations;
maxInvocations = project.maxInvocations;
active = project.active;
paused = project.paused;
completedTimestamp = project.completedTimestamp;
locked = !_projectUnlocked(_projectId);
}
/**
* @notice Returns artist payment information for project `_projectId`.
* @param _projectId Project to be queried
* @return artistAddress Project Artist's address
* @return additionalPayeePrimarySales Additional payee address for primary
* sales
* @return additionalPayeePrimarySalesPercentage Percentage of artist revenue
* to be sent to the additional payee address for primary sales
* @return additionalPayeeSecondarySales Additional payee address for secondary
* sales royalties
* @return additionalPayeeSecondarySalesPercentage Percentage of artist revenue
* to be sent to the additional payee address for secondary sales royalties
* @return secondaryMarketRoyaltyPercentage Royalty percentage to be sent to
* combination of artist and additional payee. This does not include the
* platform's percentage of secondary sales royalties, which is defined as
* the sum of `renderProviderSecondarySalesBPS`
* and `platformProviderSecondarySalesBPS`.
*/
function projectArtistPaymentInfo(
uint256 _projectId
)
external
view
returns (
address artistAddress,
address additionalPayeePrimarySales,
uint256 additionalPayeePrimarySalesPercentage,
address additionalPayeeSecondarySales,
uint256 additionalPayeeSecondarySalesPercentage,
uint256 secondaryMarketRoyaltyPercentage
)
{
ProjectFinance storage projectFinance = projectIdToFinancials[
_projectId
];
artistAddress = projectFinance.artistAddress;
additionalPayeePrimarySales = projectFinance
.additionalPayeePrimarySales;
additionalPayeePrimarySalesPercentage = projectFinance
.additionalPayeePrimarySalesPercentage;
additionalPayeeSecondarySales = projectFinance
.additionalPayeeSecondarySales;
additionalPayeeSecondarySalesPercentage = projectFinance
.additionalPayeeSecondarySalesPercentage;
secondaryMarketRoyaltyPercentage = projectFinance
.secondaryMarketRoyaltyPercentage;
}
/**
* @notice Returns script information for project `_projectId`.
* @param _projectId Project to be queried.
* @return scriptTypeAndVersion Project's script type and version
* (e.g. "p5js(atSymbol)1.0.0")
* @return aspectRatio Aspect ratio of project (e.g. "1" for square,
* "1.77777778" for 16:9, etc.)
* @return scriptCount Count of scripts for project
*/
function projectScriptDetails(
uint256 _projectId
)
external
view
override(IGenArt721CoreContractV3_Base, IDependencyRegistryCompatibleV0)
returns (
string memory scriptTypeAndVersion,
string memory aspectRatio,
uint256 scriptCount
)
{
Project storage project = projects[_projectId];
scriptTypeAndVersion = project.scriptTypeAndVersion.toString();
aspectRatio = project.aspectRatio;
scriptCount = project.scriptCount;
}
/**
* @notice Returns address with bytecode containing project script for
* project `_projectId` at script index `_index`.
*/
function projectScriptBytecodeAddressByIndex(
uint256 _projectId,
uint256 _index
) external view returns (address) {
return projects[_projectId].scriptBytecodeAddresses[_index];
}
/**
* @notice Returns script for project `_projectId` at script index `_index`.
* @param _projectId Project to be queried.
* @param _index Index of script to be queried.
*/
function projectScriptByIndex(
uint256 _projectId,
uint256 _index
) external view returns (string memory) {
Project storage project = projects[_projectId];
// If trying to access an out-of-index script, return the empty string.
if (_index >= project.scriptCount) {
return "";
}
return _readFromBytecode(project.scriptBytecodeAddresses[_index]);
}
/**
* @notice Returns base URI for project `_projectId`.
* @param _projectId Project to be queried.
* @return projectBaseURI Base URI for project
*/
function projectURIInfo(
uint256 _projectId
) external view returns (string memory projectBaseURI) {
projectBaseURI = projects[_projectId].projectBaseURI;
}
/**
* @notice Backwards-compatible (pre-V3) function returning if `_minter` is
* minterContract.
* @param _minter Address to be queried.
* @return bool Boolean representing if `_minter` is minterContract.
*/
function isMintWhitelisted(address _minter) external view returns (bool) {
return (minterContract == _minter);
}
/**
* @notice Gets qty of randomizers in history of all randomizers used by
* this core contract. If a randomizer is switched away from then back to,
* it will show up in the history twice.
* @return randomizerHistoryCount Count of randomizers in history
*/
function numHistoricalRandomizers() external view returns (uint256) {
return _historicalRandomizerAddresses.length;
}
/**
* @notice Gets address of randomizer at index `_index` in history of all
* randomizers used by this core contract. Index is zero-based.
* @param _index Historical index of randomizer to be queried.
* @return randomizerAddress Address of randomizer at index `_index`.
* @dev If a randomizer is switched away from and then switched back to, it
* will show up in the history twice.
*/
function getHistoricalRandomizerAt(
uint256 _index
) external view returns (address) {
require(
_index < _historicalRandomizerAddresses.length,
"Index out of bounds"
);
return _historicalRandomizerAddresses[_index];
}
/**
* @notice Gets royalty Basis Points (BPS) for token ID `_tokenId`.
* This conforms to the IManifold interface designated in the Royalty
* Registry's RoyaltyEngineV1.sol contract.
* ref: https://github.com/manifoldxyz/royalty-registry-solidity
* @param _tokenId Token ID to be queried.
* @return recipients Array of royalty payment recipients
* @return bps Array of Basis Points (BPS) allocated to each recipient,
* aligned by index.
* @dev reverts if invalid _tokenId
* @dev only returns recipients that have a non-zero BPS allocation
*/
function getRoyalties(
uint256 _tokenId
)
external
view
returns (address payable[] memory recipients, uint256[] memory bps)
{
_onlyValidTokenId(_tokenId);
// initialize arrays with maximum potential length
recipients = new address payable[](4);
bps = new uint256[](4);
uint256 projectId = tokenIdToProjectId(_tokenId);
ProjectFinance storage projectFinance = projectIdToFinancials[
projectId
];
// load values into memory
uint256 royaltyPercentageForArtistAndAdditional = projectFinance
.secondaryMarketRoyaltyPercentage;
uint256 additionalPayeePercentage = projectFinance
.additionalPayeeSecondarySalesPercentage;
// calculate BPS = percentage * 100
uint256 artistBPS = (ONE_HUNDRED - additionalPayeePercentage) *
royaltyPercentageForArtistAndAdditional;
uint256 additionalBPS = additionalPayeePercentage *
royaltyPercentageForArtistAndAdditional;
uint256 renderProviderBPS = renderProviderSecondarySalesBPS;
uint256 platformProviderBPS = platformProviderSecondarySalesBPS;
// populate arrays
uint256 payeeCount;
if (artistBPS > 0) {
recipients[payeeCount] = projectFinance.artistAddress;
bps[payeeCount++] = artistBPS;
}
if (additionalBPS > 0) {
recipients[payeeCount] = projectFinance
.additionalPayeeSecondarySales;
bps[payeeCount++] = additionalBPS;
}
if (renderProviderBPS > 0) {
recipients[payeeCount] = renderProviderSecondarySalesAddress;
bps[payeeCount++] = renderProviderBPS;
}
if (platformProviderBPS > 0) {
recipients[payeeCount] = platformProviderSecondarySalesAddress;
bps[payeeCount++] = platformProviderBPS;
}
// trim arrays if necessary
if (4 > payeeCount) {
assembly {
let decrease := sub(4, payeeCount)
mstore(recipients, sub(mload(recipients), decrease))
mstore(bps, sub(mload(bps), decrease))
}
}
return (recipients, bps);
}
/**
* @notice View function that returns appropriate revenue splits between
* different render provider, platform provider, Artist, and Artist's
* additional primary sales payee given a sale price of `_price` on
* project `_projectId`.
* This always returns four revenue amounts and four addresses, but if a
* revenue is zero for either Artist or additional payee, the corresponding
* address returned will also be null (for gas optimization).
* Does not account for refund if user overpays for a token (minter should
* handle a refund of the difference, if appropriate).
* Some minters may have alternative methods of splitting payments, in
* which case they should implement their own payment splitting logic.
* @param _projectId Project ID to be queried.
* @param _price Sale price of token.
* @return renderProviderRevenue_ amount of revenue to be sent to the
* render provider
* @return renderProviderAddress_ address to send render provider revenue to
* @return platformProviderRevenue_ amount of revenue to be sent to the
* platform provider
* @return platformProviderAddress_ address to send platform provider revenue to
* @return artistRevenue_ amount of revenue to be sent to Artist
* @return artistAddress_ address to send Artist revenue to. Will be null
* if no revenue is due to artist (gas optimization).
* @return additionalPayeePrimaryRevenue_ amount of revenue to be sent to
* additional payee for primary sales
* @return additionalPayeePrimaryAddress_ address to send Artist's
* additional payee for primary sales revenue to. Will be null if no
* revenue is due to additional payee for primary sales (gas optimization).
* @dev this always returns four addresses and four revenues, but if the
* revenue is zero, the corresponding address will be address(0). It is up
* to the contract performing the revenue split to handle this
* appropriately.
*/
function getPrimaryRevenueSplits(
uint256 _projectId,
uint256 _price
)
external
view
returns (
uint256 renderProviderRevenue_,
address payable renderProviderAddress_,
uint256 platformProviderRevenue_,
address payable platformProviderAddress_,
uint256 artistRevenue_,
address payable artistAddress_,
uint256 additionalPayeePrimaryRevenue_,
address payable additionalPayeePrimaryAddress_
)
{
ProjectFinance storage projectFinance = projectIdToFinancials[
_projectId
];
// calculate revenues – this is a three-way split between the
// render provider, the platform provider, and the artist, and
// is safe to perform this given that in the case of loss of
// precision Solidity will round down.
uint256 projectFunds = _price;
renderProviderRevenue_ =
(_price * uint256(_renderProviderPrimarySalesPercentage)) /
ONE_HUNDRED;
// renderProviderRevenue_ percentage is always <=100, so guaranteed to never underflow
projectFunds -= renderProviderRevenue_;
platformProviderRevenue_ =
(_price * uint256(_platformProviderPrimarySalesPercentage)) /
ONE_HUNDRED;
// platformProviderRevenue_ percentage is always <=100, so guaranteed to never underflow
projectFunds -= platformProviderRevenue_;
additionalPayeePrimaryRevenue_ =
(projectFunds *
projectFinance.additionalPayeePrimarySalesPercentage) /
ONE_HUNDRED;
// projectIdToAdditionalPayeePrimarySalesPercentage is always
// <=100, so guaranteed to never underflow
artistRevenue_ = projectFunds - additionalPayeePrimaryRevenue_;
// set addresses from storage
renderProviderAddress_ = renderProviderPrimarySalesAddress;
platformProviderAddress_ = platformProviderPrimarySalesAddress;
if (artistRevenue_ > 0) {
artistAddress_ = projectFinance.artistAddress;
}
if (additionalPayeePrimaryRevenue_ > 0) {
additionalPayeePrimaryAddress_ = projectFinance
.additionalPayeePrimarySales;
}
}
/**
* @notice Backwards-compatible (pre-V3) getter returning contract admin
* @return address Address of contract admin (same as owner)
*/
function admin() external view returns (address) {
return owner();
}
/**
* @notice Gets the project ID for a given `_tokenId`.
* @param _tokenId Token ID to be queried.
* @return _projectId Project ID for given `_tokenId`.
*/
function tokenIdToProjectId(
uint256 _tokenId
) public pure returns (uint256 _projectId) {
return _tokenId / ONE_MILLION;
}
/**
* @notice Convenience function that returns whether `_sender` is allowed
* to call function with selector `_selector` on contract `_contract`, as
* determined by this contract's current Admin ACL contract. Expected use
* cases include minter contracts checking if caller is allowed to call
* admin-gated functions on minter contracts.
* @param _sender Address of the sender calling function with selector
* `_selector` on contract `_contract`.
* @param _contract Address of the contract being called by `_sender`.
* @param _selector Function selector of the function being called by
* `_sender`.
* @return bool Whether `_sender` is allowed to call function with selector
* `_selector` on contract `_contract`.
* @dev assumes the Admin ACL contract is the owner of this contract, which
* is expected to always be true.
* @dev adminACLContract is expected to either be null address (if owner
* has renounced ownership), or conform to IAdminACLV0 interface. Check for
* null address first to avoid revert when admin has renounced ownership.
*/
function adminACLAllowed(
address _sender,
address _contract,
bytes4 _selector
) public returns (bool) {
return
owner() != address(0) &&
adminACLContract.allowed(_sender, _contract, _selector);
}
/**
* @notice Returns contract owner. Set to deployer's address by default on
* contract deployment.
* @return address Address of contract owner.
* @dev ref: https://docs.openzeppelin.com/contracts/4.x/api/access#Ownable
* @dev owner role was called `admin` prior to V3 core contract
*/
function owner()
public
view
override(Ownable, IGenArt721CoreContractV3_Base)
returns (address)
{
return Ownable.owner();
}
/**
* @notice Gets token URI for token ID `_tokenId`.
* @param _tokenId Token ID to be queried.
* @return string URI of token ID `_tokenId`.
* @dev token URIs are the concatenation of the project base URI and the
* token ID.
*/
function tokenURI(
uint256 _tokenId
) public view override returns (string memory) {
_onlyValidTokenId(_tokenId);
string memory _projectBaseURI = projects[tokenIdToProjectId(_tokenId)]
.projectBaseURI;
return string.concat(_projectBaseURI, _tokenId.toString());
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(
bytes4 interfaceId
) public view virtual override returns (bool) {
return
interfaceId == type(IManifold).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @notice Forbids new projects from being created
* @dev only performs operation and emits event if contract is not already
* forbidding new projects.
*/
function _forbidNewProjects() internal {
if (!newProjectsForbidden) {
newProjectsForbidden = true;
emit PlatformUpdated(FIELD_NEW_PROJECTS_FORBIDDEN);
}
}
/**
* @notice Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
* @param newOwner New owner.
* @dev owner role was called `admin` prior to V3 core contract.
* @dev Overrides and wraps OpenZeppelin's _transferOwnership function to
* also update adminACLContract for improved introspection.
*/
function _transferOwnership(address newOwner) internal override {
Ownable._transferOwnership(newOwner);
adminACLContract = IAdminACLV0(newOwner);
}
/**
* @notice Updates sales addresses for the platform and render providers to
* the input parameters.
* @param _renderProviderPrimarySalesAddress Address of new primary sales
* payment address.
* @param _renderProviderSecondarySalesAddress Address of new secondary sales
* payment address.
* @param _platformProviderPrimarySalesAddress Address of new primary sales
* payment address.
* @param _platformProviderSecondarySalesAddress Address of new secondary sales
* payment address.
* @dev Note that this method does not check that the input address is
* not `address(0)`, as it is expected that callers of this method should
* perform input validation where applicable.
*/
function _updateProviderSalesAddresses(
address _renderProviderPrimarySalesAddress,
address _renderProviderSecondarySalesAddress,
address _platformProviderPrimarySalesAddress,
address _platformProviderSecondarySalesAddress
) internal {
platformProviderPrimarySalesAddress = payable(
_platformProviderPrimarySalesAddress
);
platformProviderSecondarySalesAddress = payable(
_platformProviderSecondarySalesAddress
);
renderProviderPrimarySalesAddress = payable(
_renderProviderPrimarySalesAddress
);
renderProviderSecondarySalesAddress = payable(
_renderProviderSecondarySalesAddress
);
emit PlatformUpdated(FIELD_PROVIDER_SALES_ADDRESSES);
}
/**
* @notice Updates randomizer address to `_randomizerAddress`.
* @param _randomizerAddress New randomizer address.
* @dev Note that this method does not check that the input address is
* not `address(0)`, as it is expected that callers of this method should
* perform input validation where applicable.
*/
function _updateRandomizerAddress(address _randomizerAddress) internal {
randomizerContract = IRandomizer_V3CoreBase(_randomizerAddress);
// populate historical randomizer array
_historicalRandomizerAddresses.push(_randomizerAddress);
emit PlatformUpdated(FIELD_RANDOMIZER_ADDRESS);
}
/**
* @notice Updates default base URI to `_defaultBaseURI`.
* When new projects are added, their `projectBaseURI` is automatically
* initialized to `_defaultBaseURI`.
* @param _defaultBaseURI New default base URI.
* @dev Note that this method does not check that the input string is not
* the empty string, as it is expected that callers of this method should
* perform input validation where applicable.
*/
function _updateDefaultBaseURI(string memory _defaultBaseURI) internal {
defaultBaseURI = _defaultBaseURI;
emit PlatformUpdated(FIELD_DEFAULT_BASE_URI);
}
/**
* @notice Internal function to complete a project.
* @param _projectId Project ID to be completed.
*/
function _completeProject(uint256 _projectId) internal {
projects[_projectId].completedTimestamp = uint64(block.timestamp);
emit ProjectUpdated(_projectId, FIELD_PROJECT_COMPLETED);
}
/**
* @notice Internal function that returns whether a project is unlocked.
* Projects automatically lock four weeks after they are completed.
* Projects are considered completed when they have been invoked the
* maximum number of times.
* @param _projectId Project ID to be queried.
* @return bool true if project is unlocked, false otherwise.
* @dev This also enforces that the `_projectId` passed in is valid.
*/
function _projectUnlocked(uint256 _projectId) internal view returns (bool) {
_onlyValidProjectId(_projectId);
uint256 projectCompletedTimestamp = projects[_projectId]
.completedTimestamp;
bool projectOpen = projectCompletedTimestamp == 0;
return
projectOpen ||
(block.timestamp - projectCompletedTimestamp <
FOUR_WEEKS_IN_SECONDS);
}
/**
* Helper for calling `BytecodeStorageReader` external library reader method,
* added for bytecode size reduction purposes.
*/
function _readFromBytecode(
address _address
) internal view returns (string memory) {
return BytecodeStorageReader.readFromBytecode(_address);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.0;
interface IAdminACLV0 {
/**
* @notice Token ID `_tokenId` minted to `_to`.
* @param previousSuperAdmin The previous superAdmin address.
* @param newSuperAdmin The new superAdmin address.
* @param genArt721CoreAddressesToUpdate Array of genArt721Core
* addresses to update to the new superAdmin, for indexing purposes only.
*/
event SuperAdminTransferred(
address indexed previousSuperAdmin,
address indexed newSuperAdmin,
address[] genArt721CoreAddressesToUpdate
);
/// Type of the Admin ACL contract, e.g. "AdminACLV0"
function AdminACLType() external view returns (string memory);
/// super admin address
function superAdmin() external view returns (address);
/**
* @notice Calls transferOwnership on other contract from this contract.
* This is useful for updating to a new AdminACL contract.
* @dev this function should be gated to only superAdmin-like addresses.
*/
function transferOwnershipOn(
address _contract,
address _newAdminACL
) external;
/**
* @notice Calls renounceOwnership on other contract from this contract.
* @dev this function should be gated to only superAdmin-like addresses.
*/
function renounceOwnershipOn(address _contract) external;
/**
* @notice Checks if sender `_sender` is allowed to call function with selector
* `_selector` on contract `_contract`.
*/
function allowed(
address _sender,
address _contract,
bytes4 _selector
) external returns (bool);
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.19;
interface IDependencyRegistryCompatibleV0 {
/// Dependency registry managed by Art Blocks
function artblocksDependencyRegistryAddress()
external
view
returns (address);
/**
* @notice Returns script information for project `_projectId`.
* @param _projectId Project to be queried.
* @return scriptTypeAndVersion Project's script type and version
* (e.g. "p5js(atSymbol)1.0.0")
* @return aspectRatio Aspect ratio of project (e.g. "1" for square,
* "1.77777778" for 16:9, etc.)
* @return scriptCount Count of scripts for project
*/
function projectScriptDetails(
uint256 _projectId
)
external
view
returns (
string memory scriptTypeAndVersion,
string memory aspectRatio,
uint256 scriptCount
);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.0;
interface IGenArt721CoreContractExposesHashSeed {
// function to read the hash-seed for a given tokenId
function tokenIdToHashSeed(
uint256 _tokenId
) external view returns (bytes12);
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.0;
import "./IAdminACLV0.sol";
/// use the Royalty Registry's IManifold interface for token royalties
import "./IManifold.sol";
/**
* @title This interface is intended to house interface items that are common
* across all GenArt721CoreContractV3 flagship and derivative implementations.
* This interface extends the IManifold royalty interface in order to
* add support the Royalty Registry by default.
* @author Art Blocks Inc.
*/
interface IGenArt721CoreContractV3_Base is IManifold {
/**
* @notice Token ID `_tokenId` minted to `_to`.
*/
event Mint(address indexed _to, uint256 indexed _tokenId);
/**
* @notice currentMinter updated to `_currentMinter`.
* @dev Implemented starting with V3 core
*/
event MinterUpdated(address indexed _currentMinter);
/**
* @notice Platform updated on bytes32-encoded field `_field`.
*/
event PlatformUpdated(bytes32 indexed _field);
/**
* @notice Project ID `_projectId` updated on bytes32-encoded field
* `_update`.
*/
event ProjectUpdated(uint256 indexed _projectId, bytes32 indexed _update);
event ProposedArtistAddressesAndSplits(
uint256 indexed _projectId,
address _artistAddress,
address _additionalPayeePrimarySales,
uint256 _additionalPayeePrimarySalesPercentage,
address _additionalPayeeSecondarySales,
uint256 _additionalPayeeSecondarySalesPercentage
);
event AcceptedArtistAddressesAndSplits(uint256 indexed _projectId);
// version and type of the core contract
// coreVersion is a string of the form "0.x.y"
function coreVersion() external view returns (string memory);
// coreType is a string of the form "GenArt721CoreV3"
function coreType() external view returns (string memory);
// owner (pre-V3 was named admin) of contract
// this is expected to be an Admin ACL contract for V3
function owner() external view returns (address);
// Admin ACL contract for V3, will be at the address owner()
function adminACLContract() external returns (IAdminACLV0);
// backwards-compatible (pre-V3) admin - equal to owner()
function admin() external view returns (address);
/**
* Function determining if _sender is allowed to call function with
* selector _selector on contract `_contract`. Intended to be used with
* peripheral contracts such as minters, as well as internally by the
* core contract itself.
*/
function adminACLAllowed(
address _sender,
address _contract,
bytes4 _selector
) external returns (bool);
/// getter function of public variable
function startingProjectId() external view returns (uint256);
// getter function of public variable
function nextProjectId() external view returns (uint256);
// getter function of public mapping
function tokenIdToProjectId(
uint256 tokenId
) external view returns (uint256 projectId);
// @dev this is not available in V0
function isMintWhitelisted(address minter) external view returns (bool);
function projectIdToArtistAddress(
uint256 _projectId
) external view returns (address payable);
function projectIdToAdditionalPayeePrimarySales(
uint256 _projectId
) external view returns (address payable);
function projectIdToAdditionalPayeePrimarySalesPercentage(
uint256 _projectId
) external view returns (uint256);
function projectIdToSecondaryMarketRoyaltyPercentage(
uint256 _projectId
) external view returns (uint256);
function projectURIInfo(
uint256 _projectId
) external view returns (string memory projectBaseURI);
// @dev new function in V3
function projectStateData(
uint256 _projectId
)
external
view
returns (
uint256 invocations,
uint256 maxInvocations,
bool active,
bool paused,
uint256 completedTimestamp,
bool locked
);
function projectDetails(
uint256 _projectId
)
external
view
returns (
string memory projectName,
string memory artist,
string memory description,
string memory website,
string memory license
);
function projectScriptDetails(
uint256 _projectId
)
external
view
returns (
string memory scriptTypeAndVersion,
string memory aspectRatio,
uint256 scriptCount
);
function projectScriptByIndex(
uint256 _projectId,
uint256 _index
) external view returns (string memory);
function tokenIdToHash(uint256 _tokenId) external view returns (bytes32);
// function to set a token's hash (must be guarded)
function setTokenHash_8PT(uint256 _tokenId, bytes32 _hash) external;
// @dev gas-optimized signature in V3 for `mint`
function mint_Ecf(
address _to,
uint256 _projectId,
address _by
) external returns (uint256 tokenId);
}
// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.
pragma solidity ^0.8.0;
import "./IAdminACLV0.sol";
import "./IGenArt721CoreContractV3_Base.sol";
interface IGenArt721CoreContractV3_Engine is IGenArt721CoreContractV3_Base {
// @dev new function in V3
function getPrimaryRevenueSplits(
uint256 _projectId,
uint256 _price
)
external
view
returns (
uint256 renderProviderRevenue_,
address payable renderProviderAddress_,
uint256 platformProviderRevenue_,
address payable platformProviderAddress_,
uint256 artistRevenue_,
address payable artistAddress_,
uint256 additionalPayeePrimaryRevenue_,
address payable additionalPayeePrimaryAddress_
);
// @dev The render provider primary sales payment address
function renderProviderPrimarySalesAddress()
external
view
returns (address payable);
// @dev The platform provider primary sales payment address
function platformProviderPrimarySalesAddress()
external
view
returns (address payable);
// @dev Percentage of primary sales allocated to the render provider
function renderProviderPrimarySalesPercentage()
external
view
returns (uint256);
// @dev Percentage of primary sales allocated to the platform provider
function platformProviderPrimarySalesPercentage()
external
view
returns (uint256);
// @dev The render provider secondary sales royalties payment address
function renderProviderSecondarySalesAddress()
external
view
returns (address payable);
// @dev The platform provider secondary sales royalties payment address
function platformProviderSecondarySalesAddress()
external
view
returns (address payable);
// @dev Basis points of secondary sales allocated to the render provider
function renderProviderSecondarySalesBPS() external view returns (uint256);
// @dev Basis points of secondary sales allocated to the platform provider
function platformProviderSecondarySalesBPS()
external
view
returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @dev Royalty Registry interface, used to support the Royalty Registry.
/// @dev Source: https://github.com/manifoldxyz/royalty-registry-solidity/blob/main/contracts/specs/IManifold.sol
/// @author: manifold.xyz
/**
* @dev Royalty interface for creator core classes
*/
interface IManifold {
/**
* @dev Get royalites of a token. Returns list of receivers and basisPoints
*
* bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
*
* => 0xbb3bafd6 = 0xbb3bafd6
*/
function getRoyalties(
uint256 tokenId
) external view returns (address payable[] memory, uint256[] memory);
}
// SPDX-License-Identifier: LGPL-3.0-only
// Creatd By: Art Blocks Inc.
pragma solidity ^0.8.0;
interface IRandomizer_V3CoreBase {
/**
* @notice This function is intended to be called by a core contract, and
* the core contract can be assured that the randomizer will call back to
* the calling contract to set the token hash seed for `_tokenId` via
* `setTokenHash_8PT`.
* @dev This function may revert if hash seed generation is improperly
* configured (for example, if in polyptych mode, but no hash seed has been
* previously configured).
* @dev This function is not specifically gated to any specific caller, but
* will only call back to the calling contract, `msg.sender`, to set the
* specified token's hash seed.
* A third party contract calling this function will not be able to set the
* token hash seed on a different core contract.
* @param _tokenId The token ID must be assigned a hash.
*/
function assignTokenHash(uint256 _tokenId) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
{
"compilationTarget": {
"contracts/engine/V3/GenArt721CoreV3_Engine.sol": "GenArt721CoreV3_Engine"
},
"evmVersion": "paris",
"libraries": {
"contracts/libs/v0.8.x/BytecodeStorageV1.sol:BytecodeStorageReader": "0xf0585df582a0ad119f1616fb82f3b449a98eecd5"
},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 25
},
"remappings": []
}[{"inputs":[{"internalType":"string","name":"_tokenName","type":"string"},{"internalType":"string","name":"_tokenSymbol","type":"string"},{"internalType":"address","name":"_renderProviderAddress","type":"address"},{"internalType":"address","name":"_platformProviderAddress","type":"address"},{"internalType":"address","name":"_randomizerContract","type":"address"},{"internalType":"address","name":"_adminACLContract","type":"address"},{"internalType":"uint248","name":"_startingProjectId","type":"uint248"},{"internalType":"bool","name":"_autoApproveArtistSplitProposals","type":"bool"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"AcceptedArtistAddressesAndSplits","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_to","type":"address"},{"indexed":true,"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_currentMinter","type":"address"}],"name":"MinterUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"_field","type":"bytes32"}],"name":"PlatformUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":true,"internalType":"bytes32","name":"_update","type":"bytes32"}],"name":"ProjectUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"address","name":"_artistAddress","type":"address"},{"indexed":false,"internalType":"address","name":"_additionalPayeePrimarySales","type":"address"},{"indexed":false,"internalType":"uint256","name":"_additionalPayeePrimarySalesPercentage","type":"uint256"},{"indexed":false,"internalType":"address","name":"_additionalPayeeSecondarySales","type":"address"},{"indexed":false,"internalType":"uint256","name":"_additionalPayeeSecondarySalesPercentage","type":"uint256"}],"name":"ProposedArtistAddressesAndSplits","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"string","name":"_projectName","type":"string"},{"internalType":"address payable","name":"_artistAddress","type":"address"}],"name":"addProject","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_script","type":"string"}],"name":"addProjectScript","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_sender","type":"address"},{"internalType":"address","name":"_contract","type":"address"},{"internalType":"bytes4","name":"_selector","type":"bytes4"}],"name":"adminACLAllowed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"adminACLContract","outputs":[{"internalType":"contract IAdminACLV0","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address payable","name":"_artistAddress","type":"address"},{"internalType":"address payable","name":"_additionalPayeePrimarySales","type":"address"},{"internalType":"uint256","name":"_additionalPayeePrimarySalesPercentage","type":"uint256"},{"internalType":"address payable","name":"_additionalPayeeSecondarySales","type":"address"},{"internalType":"uint256","name":"_additionalPayeeSecondarySalesPercentage","type":"uint256"}],"name":"adminAcceptArtistAddressesAndSplits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"artblocksDependencyRegistryAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"autoApproveArtistSplitProposals","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"coreType","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"coreVersion","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"defaultBaseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"forbidNewProjects","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_index","type":"uint256"}],"name":"getHistoricalRandomizerAt","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_price","type":"uint256"}],"name":"getPrimaryRevenueSplits","outputs":[{"internalType":"uint256","name":"renderProviderRevenue_","type":"uint256"},{"internalType":"address payable","name":"renderProviderAddress_","type":"address"},{"internalType":"uint256","name":"platformProviderRevenue_","type":"uint256"},{"internalType":"address payable","name":"platformProviderAddress_","type":"address"},{"internalType":"uint256","name":"artistRevenue_","type":"uint256"},{"internalType":"address payable","name":"artistAddress_","type":"address"},{"internalType":"uint256","name":"additionalPayeePrimaryRevenue_","type":"uint256"},{"internalType":"address payable","name":"additionalPayeePrimaryAddress_","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"getRoyalties","outputs":[{"internalType":"address payable[]","name":"recipients","type":"address[]"},{"internalType":"uint256[]","name":"bps","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_minter","type":"address"}],"name":"isMintWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_by","type":"address"}],"name":"mint_Ecf","outputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"minterContract","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"newProjectsForbidden","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nextProjectId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numHistoricalRandomizers","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platformProviderPrimarySalesAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platformProviderPrimarySalesPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platformProviderSecondarySalesAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platformProviderSecondarySalesBPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectArtistPaymentInfo","outputs":[{"internalType":"address","name":"artistAddress","type":"address"},{"internalType":"address","name":"additionalPayeePrimarySales","type":"address"},{"internalType":"uint256","name":"additionalPayeePrimarySalesPercentage","type":"uint256"},{"internalType":"address","name":"additionalPayeeSecondarySales","type":"address"},{"internalType":"uint256","name":"additionalPayeeSecondarySalesPercentage","type":"uint256"},{"internalType":"uint256","name":"secondaryMarketRoyaltyPercentage","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectDetails","outputs":[{"internalType":"string","name":"projectName","type":"string"},{"internalType":"string","name":"artist","type":"string"},{"internalType":"string","name":"description","type":"string"},{"internalType":"string","name":"website","type":"string"},{"internalType":"string","name":"license","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToAdditionalPayeePrimarySales","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToAdditionalPayeePrimarySalesPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToAdditionalPayeeSecondarySales","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToAdditionalPayeeSecondarySalesPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToArtistAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectIdToSecondaryMarketRoyaltyPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_index","type":"uint256"}],"name":"projectScriptByIndex","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_index","type":"uint256"}],"name":"projectScriptBytecodeAddressByIndex","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectScriptDetails","outputs":[{"internalType":"string","name":"scriptTypeAndVersion","type":"string"},{"internalType":"string","name":"aspectRatio","type":"string"},{"internalType":"uint256","name":"scriptCount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectStateData","outputs":[{"internalType":"uint256","name":"invocations","type":"uint256"},{"internalType":"uint256","name":"maxInvocations","type":"uint256"},{"internalType":"bool","name":"active","type":"bool"},{"internalType":"bool","name":"paused","type":"bool"},{"internalType":"uint256","name":"completedTimestamp","type":"uint256"},{"internalType":"bool","name":"locked","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectURIInfo","outputs":[{"internalType":"string","name":"projectBaseURI","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address payable","name":"_artistAddress","type":"address"},{"internalType":"address payable","name":"_additionalPayeePrimarySales","type":"address"},{"internalType":"uint256","name":"_additionalPayeePrimarySalesPercentage","type":"uint256"},{"internalType":"address payable","name":"_additionalPayeeSecondarySales","type":"address"},{"internalType":"uint256","name":"_additionalPayeeSecondarySalesPercentage","type":"uint256"}],"name":"proposeArtistPaymentAddressesAndSplits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"proposedArtistAddressesAndSplitsHash","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"randomizerContract","outputs":[{"internalType":"contract IRandomizer_V3CoreBase","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"removeProjectLastScript","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renderProviderPrimarySalesAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renderProviderPrimarySalesPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renderProviderSecondarySalesAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renderProviderSecondarySalesBPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"},{"internalType":"bytes32","name":"_hashSeed","type":"bytes32"}],"name":"setTokenHash_8PT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startingProjectId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"toggleProjectIsActive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"toggleProjectIsPaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenIdToHash","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenIdToHashSeed","outputs":[{"internalType":"bytes12","name":"","type":"bytes12"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenIdToProjectId","outputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_artblocksDependencyRegistryAddress","type":"address"}],"name":"updateArtblocksDependencyRegistryAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_defaultBaseURI","type":"string"}],"name":"updateDefaultBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"updateMinterContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address payable","name":"_artistAddress","type":"address"}],"name":"updateProjectArtistAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_projectArtistName","type":"string"}],"name":"updateProjectArtistName","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_aspectRatio","type":"string"}],"name":"updateProjectAspectRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_newBaseURI","type":"string"}],"name":"updateProjectBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_projectDescription","type":"string"}],"name":"updateProjectDescription","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_projectLicense","type":"string"}],"name":"updateProjectLicense","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint24","name":"_maxInvocations","type":"uint24"}],"name":"updateProjectMaxInvocations","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_projectName","type":"string"}],"name":"updateProjectName","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_scriptId","type":"uint256"},{"internalType":"string","name":"_script","type":"string"}],"name":"updateProjectScript","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32","name":"_scriptTypeAndVersion","type":"bytes32"}],"name":"updateProjectScriptType","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_secondMarketRoyalty","type":"uint256"}],"name":"updateProjectSecondaryMarketRoyaltyPercentage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"string","name":"_projectWebsite","type":"string"}],"name":"updateProjectWebsite","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"renderProviderPrimarySalesPercentage_","type":"uint256"},{"internalType":"uint256","name":"platformProviderPrimarySalesPercentage_","type":"uint256"}],"name":"updateProviderPrimarySalesPercentages","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"_renderProviderPrimarySalesAddress","type":"address"},{"internalType":"address payable","name":"_renderProviderSecondarySalesAddress","type":"address"},{"internalType":"address payable","name":"_platformProviderPrimarySalesAddress","type":"address"},{"internalType":"address payable","name":"_platformProviderSecondarySalesAddress","type":"address"}],"name":"updateProviderSalesAddresses","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_renderProviderSecondarySalesBPS","type":"uint256"},{"internalType":"uint256","name":"_platformProviderSecondarySalesBPS","type":"uint256"}],"name":"updateProviderSecondarySalesBPS","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_randomizerAddress","type":"address"}],"name":"updateRandomizerAddress","outputs":[],"stateMutability":"nonpayable","type":"function"}]
