// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IAdminable } from "../interfaces/IAdminable.sol";
import { Errors } from "../libraries/Errors.sol";

/// @title Adminable
/// @notice See the documentation in {IAdminable}.
abstract contract Adminable is IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc IAdminable
    address public override admin;

    /*//////////////////////////////////////////////////////////////////////////
                                      MODIFIERS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Reverts if called by any account other than the admin.
    modifier onlyAdmin() {
        if (admin != msg.sender) {
            revert Errors.CallerNotAdmin({ admin: admin, caller: msg.sender });
        }
        _;
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc IAdminable
    function transferAdmin(address newAdmin) public virtual override onlyAdmin {
        // Effect: update the admin.
        admin = newAdmin;

        // Log the transfer of the admin.
        emit IAdminable.TransferAdmin({ oldAdmin: msg.sender, newAdmin: newAdmin });
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/BitMaps.sol)
pragma solidity ^0.8.20;

/**
 * @dev Library for managing uint256 to bool mapping in a compact and efficient way, provided the keys are sequential.
 * Largely inspired by Uniswap's https://github.com/Uniswap/merkle-distributor/blob/master/contracts/MerkleDistributor.sol[merkle-distributor].
 *
 * BitMaps pack 256 booleans across each bit of a single 256-bit slot of `uint256` type.
 * Hence booleans corresponding to 256 _sequential_ indices would only consume a single slot,
 * unlike the regular `bool` which would consume an entire slot for a single value.
 *
 * This results in gas savings in two ways:
 *
 * - Setting a zero value to non-zero only once every 256 times
 * - Accessing the same warm slot for every 256 _sequential_ indices
 */
library BitMaps {
    struct BitMap {
        mapping(uint256 bucket => uint256) _data;
    }

    /**
     * @dev Returns whether the bit at `index` is set.
     */
    function get(BitMap storage bitmap, uint256 index) internal view returns (bool) {
        uint256 bucket = index >> 8;
        uint256 mask = 1 << (index & 0xff);
        return bitmap._data[bucket] & mask != 0;
    }

    /**
     * @dev Sets the bit at `index` to the boolean `value`.
     */
    function setTo(BitMap storage bitmap, uint256 index, bool value) internal {
        if (value) {
            set(bitmap, index);
        } else {
            unset(bitmap, index);
        }
    }

    /**
     * @dev Sets the bit at `index`.
     */
    function set(BitMap storage bitmap, uint256 index) internal {
        uint256 bucket = index >> 8;
        uint256 mask = 1 << (index & 0xff);
        bitmap._data[bucket] |= mask;
    }

    /**
     * @dev Unsets the bit at `index`.
     */
    function unset(BitMap storage bitmap, uint256 index) internal {
        uint256 bucket = index >> 8;
        uint256 mask = 1 << (index & 0xff);
        bitmap._data[bucket] &= ~mask;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Errors.sol" as CastingErrors;
import { MAX_UINT128, MAX_UINT40 } from "../Common.sol";
import { uMAX_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { uMAX_SD59x18 } from "../sd59x18/Constants.sol";
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { uMAX_UD2x18 } from "../ud2x18/Constants.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Casts a UD60x18 number into SD1x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(UD60x18 x) pure returns (SD1x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(int256(uMAX_SD1x18))) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD1x18_Overflow(x);
    }
    result = SD1x18.wrap(int64(uint64(xUint)));
}

/// @notice Casts a UD60x18 number into UD2x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_UD2x18`.
function intoUD2x18(UD60x18 x) pure returns (UD2x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uMAX_UD2x18) {
        revert CastingErrors.PRBMath_UD60x18_IntoUD2x18_Overflow(x);
    }
    result = UD2x18.wrap(uint64(xUint));
}

/// @notice Casts a UD60x18 number into SD59x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD59x18`.
function intoSD59x18(UD60x18 x) pure returns (SD59x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(uMAX_SD59x18)) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD59x18_Overflow(x);
    }
    result = SD59x18.wrap(int256(xUint));
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev This is basically an alias for {unwrap}.
function intoUint256(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT128`.
function intoUint128(UD60x18 x) pure returns (uint128 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT128) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint128_Overflow(x);
    }
    result = uint128(xUint);
}

/// @notice Casts a UD60x18 number into uint40.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(UD60x18 x) pure returns (uint40 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT40) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint40_Overflow(x);
    }
    result = uint40(xUint);
}

/// @notice Alias for {wrap}.
function ud(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Alias for {wrap}.
function ud60x18(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Unwraps a UD60x18 number into uint256.
function unwrap(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Wraps a uint256 number into the UD60x18 value type.
function wrap(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

// Common.sol
//
// Common mathematical functions used in both SD59x18 and UD60x18. Note that these global functions do not
// always operate with SD59x18 and UD60x18 numbers.

/*//////////////////////////////////////////////////////////////////////////
                                CUSTOM ERRORS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Thrown when the resultant value in {mulDiv} overflows uint256.
error PRBMath_MulDiv_Overflow(uint256 x, uint256 y, uint256 denominator);

/// @notice Thrown when the resultant value in {mulDiv18} overflows uint256.
error PRBMath_MulDiv18_Overflow(uint256 x, uint256 y);

/// @notice Thrown when one of the inputs passed to {mulDivSigned} is `type(int256).min`.
error PRBMath_MulDivSigned_InputTooSmall();

/// @notice Thrown when the resultant value in {mulDivSigned} overflows int256.
error PRBMath_MulDivSigned_Overflow(int256 x, int256 y);

/*//////////////////////////////////////////////////////////////////////////
                                    CONSTANTS
//////////////////////////////////////////////////////////////////////////*/

/// @dev The maximum value a uint128 number can have.
uint128 constant MAX_UINT128 = type(uint128).max;

/// @dev The maximum value a uint40 number can have.
uint40 constant MAX_UINT40 = type(uint40).max;

/// @dev The unit number, which the decimal precision of the fixed-point types.
uint256 constant UNIT = 1e18;

/// @dev The unit number inverted mod 2^256.
uint256 constant UNIT_INVERSE = 78156646155174841979727994598816262306175212592076161876661_508869554232690281;

/// @dev The the largest power of two that divides the decimal value of `UNIT`. The logarithm of this value is the least significant
/// bit in the binary representation of `UNIT`.
uint256 constant UNIT_LPOTD = 262144;

/*//////////////////////////////////////////////////////////////////////////
                                    FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the binary exponent of x using the binary fraction method.
/// @dev Has to use 192.64-bit fixed-point numbers. See https://ethereum.stackexchange.com/a/96594/24693.
/// @param x The exponent as an unsigned 192.64-bit fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function exp2(uint256 x) pure returns (uint256 result) {
    unchecked {
        // Start from 0.5 in the 192.64-bit fixed-point format.
        result = 0x800000000000000000000000000000000000000000000000;

        // The following logic multiplies the result by $\sqrt{2^{-i}}$ when the bit at position i is 1. Key points:
        //
        // 1. Intermediate results will not overflow, as the starting point is 2^191 and all magic factors are under 2^65.
        // 2. The rationale for organizing the if statements into groups of 8 is gas savings. If the result of performing
        // a bitwise AND operation between x and any value in the array [0x80; 0x40; 0x20; 0x10; 0x08; 0x04; 0x02; 0x01] is 1,
        // we know that `x & 0xFF` is also 1.
        if (x & 0xFF00000000000000 > 0) {
            if (x & 0x8000000000000000 > 0) {
                result = (result * 0x16A09E667F3BCC909) >> 64;
            }
            if (x & 0x4000000000000000 > 0) {
                result = (result * 0x1306FE0A31B7152DF) >> 64;
            }
            if (x & 0x2000000000000000 > 0) {
                result = (result * 0x1172B83C7D517ADCE) >> 64;
            }
            if (x & 0x1000000000000000 > 0) {
                result = (result * 0x10B5586CF9890F62A) >> 64;
            }
            if (x & 0x800000000000000 > 0) {
                result = (result * 0x1059B0D31585743AE) >> 64;
            }
            if (x & 0x400000000000000 > 0) {
                result = (result * 0x102C9A3E778060EE7) >> 64;
            }
            if (x & 0x200000000000000 > 0) {
                result = (result * 0x10163DA9FB33356D8) >> 64;
            }
            if (x & 0x100000000000000 > 0) {
                result = (result * 0x100B1AFA5ABCBED61) >> 64;
            }
        }

        if (x & 0xFF000000000000 > 0) {
            if (x & 0x80000000000000 > 0) {
                result = (result * 0x10058C86DA1C09EA2) >> 64;
            }
            if (x & 0x40000000000000 > 0) {
                result = (result * 0x1002C605E2E8CEC50) >> 64;
            }
            if (x & 0x20000000000000 > 0) {
                result = (result * 0x100162F3904051FA1) >> 64;
            }
            if (x & 0x10000000000000 > 0) {
                result = (result * 0x1000B175EFFDC76BA) >> 64;
            }
            if (x & 0x8000000000000 > 0) {
                result = (result * 0x100058BA01FB9F96D) >> 64;
            }
            if (x & 0x4000000000000 > 0) {
                result = (result * 0x10002C5CC37DA9492) >> 64;
            }
            if (x & 0x2000000000000 > 0) {
                result = (result * 0x1000162E525EE0547) >> 64;
            }
            if (x & 0x1000000000000 > 0) {
                result = (result * 0x10000B17255775C04) >> 64;
            }
        }

        if (x & 0xFF0000000000 > 0) {
            if (x & 0x800000000000 > 0) {
                result = (result * 0x1000058B91B5BC9AE) >> 64;
            }
            if (x & 0x400000000000 > 0) {
                result = (result * 0x100002C5C89D5EC6D) >> 64;
            }
            if (x & 0x200000000000 > 0) {
                result = (result * 0x10000162E43F4F831) >> 64;
            }
            if (x & 0x100000000000 > 0) {
                result = (result * 0x100000B1721BCFC9A) >> 64;
            }
            if (x & 0x80000000000 > 0) {
                result = (result * 0x10000058B90CF1E6E) >> 64;
            }
            if (x & 0x40000000000 > 0) {
                result = (result * 0x1000002C5C863B73F) >> 64;
            }
            if (x & 0x20000000000 > 0) {
                result = (result * 0x100000162E430E5A2) >> 64;
            }
            if (x & 0x10000000000 > 0) {
                result = (result * 0x1000000B172183551) >> 64;
            }
        }

        if (x & 0xFF00000000 > 0) {
            if (x & 0x8000000000 > 0) {
                result = (result * 0x100000058B90C0B49) >> 64;
            }
            if (x & 0x4000000000 > 0) {
                result = (result * 0x10000002C5C8601CC) >> 64;
            }
            if (x & 0x2000000000 > 0) {
                result = (result * 0x1000000162E42FFF0) >> 64;
            }
            if (x & 0x1000000000 > 0) {
                result = (result * 0x10000000B17217FBB) >> 64;
            }
            if (x & 0x800000000 > 0) {
                result = (result * 0x1000000058B90BFCE) >> 64;
            }
            if (x & 0x400000000 > 0) {
                result = (result * 0x100000002C5C85FE3) >> 64;
            }
            if (x & 0x200000000 > 0) {
                result = (result * 0x10000000162E42FF1) >> 64;
            }
            if (x & 0x100000000 > 0) {
                result = (result * 0x100000000B17217F8) >> 64;
            }
        }

        if (x & 0xFF000000 > 0) {
            if (x & 0x80000000 > 0) {
                result = (result * 0x10000000058B90BFC) >> 64;
            }
            if (x & 0x40000000 > 0) {
                result = (result * 0x1000000002C5C85FE) >> 64;
            }
            if (x & 0x20000000 > 0) {
                result = (result * 0x100000000162E42FF) >> 64;
            }
            if (x & 0x10000000 > 0) {
                result = (result * 0x1000000000B17217F) >> 64;
            }
            if (x & 0x8000000 > 0) {
                result = (result * 0x100000000058B90C0) >> 64;
            }
            if (x & 0x4000000 > 0) {
                result = (result * 0x10000000002C5C860) >> 64;
            }
            if (x & 0x2000000 > 0) {
                result = (result * 0x1000000000162E430) >> 64;
            }
            if (x & 0x1000000 > 0) {
                result = (result * 0x10000000000B17218) >> 64;
            }
        }

        if (x & 0xFF0000 > 0) {
            if (x & 0x800000 > 0) {
                result = (result * 0x1000000000058B90C) >> 64;
            }
            if (x & 0x400000 > 0) {
                result = (result * 0x100000000002C5C86) >> 64;
            }
            if (x & 0x200000 > 0) {
                result = (result * 0x10000000000162E43) >> 64;
            }
            if (x & 0x100000 > 0) {
                result = (result * 0x100000000000B1721) >> 64;
            }
            if (x & 0x80000 > 0) {
                result = (result * 0x10000000000058B91) >> 64;
            }
            if (x & 0x40000 > 0) {
                result = (result * 0x1000000000002C5C8) >> 64;
            }
            if (x & 0x20000 > 0) {
                result = (result * 0x100000000000162E4) >> 64;
            }
            if (x & 0x10000 > 0) {
                result = (result * 0x1000000000000B172) >> 64;
            }
        }

        if (x & 0xFF00 > 0) {
            if (x & 0x8000 > 0) {
                result = (result * 0x100000000000058B9) >> 64;
            }
            if (x & 0x4000 > 0) {
                result = (result * 0x10000000000002C5D) >> 64;
            }
            if (x & 0x2000 > 0) {
                result = (result * 0x1000000000000162E) >> 64;
            }
            if (x & 0x1000 > 0) {
                result = (result * 0x10000000000000B17) >> 64;
            }
            if (x & 0x800 > 0) {
                result = (result * 0x1000000000000058C) >> 64;
            }
            if (x & 0x400 > 0) {
                result = (result * 0x100000000000002C6) >> 64;
            }
            if (x & 0x200 > 0) {
                result = (result * 0x10000000000000163) >> 64;
            }
            if (x & 0x100 > 0) {
                result = (result * 0x100000000000000B1) >> 64;
            }
        }

        if (x & 0xFF > 0) {
            if (x & 0x80 > 0) {
                result = (result * 0x10000000000000059) >> 64;
            }
            if (x & 0x40 > 0) {
                result = (result * 0x1000000000000002C) >> 64;
            }
            if (x & 0x20 > 0) {
                result = (result * 0x10000000000000016) >> 64;
            }
            if (x & 0x10 > 0) {
                result = (result * 0x1000000000000000B) >> 64;
            }
            if (x & 0x8 > 0) {
                result = (result * 0x10000000000000006) >> 64;
            }
            if (x & 0x4 > 0) {
                result = (result * 0x10000000000000003) >> 64;
            }
            if (x & 0x2 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
            if (x & 0x1 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
        }

        // In the code snippet below, two operations are executed simultaneously:
        //
        // 1. The result is multiplied by $(2^n + 1)$, where $2^n$ represents the integer part, and the additional 1
        // accounts for the initial guess of 0.5. This is achieved by subtracting from 191 instead of 192.
        // 2. The result is then converted to an unsigned 60.18-decimal fixed-point format.
        //
        // The underlying logic is based on the relationship $2^{191-ip} = 2^{ip} / 2^{191}$, where $ip$ denotes the,
        // integer part, $2^n$.
        result *= UNIT;
        result >>= (191 - (x >> 64));
    }
}

/// @notice Finds the zero-based index of the first 1 in the binary representation of x.
///
/// @dev See the note on "msb" in this Wikipedia article: https://en.wikipedia.org/wiki/Find_first_set
///
/// Each step in this implementation is equivalent to this high-level code:
///
/// ```solidity
/// if (x >= 2 ** 128) {
///     x >>= 128;
///     result += 128;
/// }
/// ```
///
/// Where 128 is replaced with each respective power of two factor. See the full high-level implementation here:
/// https://gist.github.com/PaulRBerg/f932f8693f2733e30c4d479e8e980948
///
/// The Yul instructions used below are:
///
/// - "gt" is "greater than"
/// - "or" is the OR bitwise operator
/// - "shl" is "shift left"
/// - "shr" is "shift right"
///
/// @param x The uint256 number for which to find the index of the most significant bit.
/// @return result The index of the most significant bit as a uint256.
/// @custom:smtchecker abstract-function-nondet
function msb(uint256 x) pure returns (uint256 result) {
    // 2^128
    assembly ("memory-safe") {
        let factor := shl(7, gt(x, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^64
    assembly ("memory-safe") {
        let factor := shl(6, gt(x, 0xFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^32
    assembly ("memory-safe") {
        let factor := shl(5, gt(x, 0xFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^16
    assembly ("memory-safe") {
        let factor := shl(4, gt(x, 0xFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^8
    assembly ("memory-safe") {
        let factor := shl(3, gt(x, 0xFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^4
    assembly ("memory-safe") {
        let factor := shl(2, gt(x, 0xF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^2
    assembly ("memory-safe") {
        let factor := shl(1, gt(x, 0x3))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^1
    // No need to shift x any more.
    assembly ("memory-safe") {
        let factor := gt(x, 0x1)
        result := or(result, factor)
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev Credits to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - The denominator must not be zero.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as a uint256.
/// @param y The multiplier as a uint256.
/// @param denominator The divisor as a uint256.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function mulDiv(uint256 x, uint256 y, uint256 denominator) pure returns (uint256 result) {
    // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
    // use the Chinese Remainder Theorem to reconstruct the 512-bit result. The result is stored in two 256
    // variables such that product = prod1 * 2^256 + prod0.
    uint256 prod0; // Least significant 256 bits of the product
    uint256 prod1; // Most significant 256 bits of the product
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    // Handle non-overflow cases, 256 by 256 division.
    if (prod1 == 0) {
        unchecked {
            return prod0 / denominator;
        }
    }

    // Make sure the result is less than 2^256. Also prevents denominator == 0.
    if (prod1 >= denominator) {
        revert PRBMath_MulDiv_Overflow(x, y, denominator);
    }

    ////////////////////////////////////////////////////////////////////////////
    // 512 by 256 division
    ////////////////////////////////////////////////////////////////////////////

    // Make division exact by subtracting the remainder from [prod1 prod0].
    uint256 remainder;
    assembly ("memory-safe") {
        // Compute remainder using the mulmod Yul instruction.
        remainder := mulmod(x, y, denominator)

        // Subtract 256 bit number from 512-bit number.
        prod1 := sub(prod1, gt(remainder, prod0))
        prod0 := sub(prod0, remainder)
    }

    unchecked {
        // Calculate the largest power of two divisor of the denominator using the unary operator ~. This operation cannot overflow
        // because the denominator cannot be zero at this point in the function execution. The result is always >= 1.
        // For more detail, see https://cs.stackexchange.com/q/138556/92363.
        uint256 lpotdod = denominator & (~denominator + 1);
        uint256 flippedLpotdod;

        assembly ("memory-safe") {
            // Factor powers of two out of denominator.
            denominator := div(denominator, lpotdod)

            // Divide [prod1 prod0] by lpotdod.
            prod0 := div(prod0, lpotdod)

            // Get the flipped value `2^256 / lpotdod`. If the `lpotdod` is zero, the flipped value is one.
            // `sub(0, lpotdod)` produces the two's complement version of `lpotdod`, which is equivalent to flipping all the bits.
            // However, `div` interprets this value as an unsigned value: https://ethereum.stackexchange.com/q/147168/24693
            flippedLpotdod := add(div(sub(0, lpotdod), lpotdod), 1)
        }

        // Shift in bits from prod1 into prod0.
        prod0 |= prod1 * flippedLpotdod;

        // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
        // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
        // four bits. That is, denominator * inv = 1 mod 2^4.
        uint256 inverse = (3 * denominator) ^ 2;

        // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
        // in modular arithmetic, doubling the correct bits in each step.
        inverse *= 2 - denominator * inverse; // inverse mod 2^8
        inverse *= 2 - denominator * inverse; // inverse mod 2^16
        inverse *= 2 - denominator * inverse; // inverse mod 2^32
        inverse *= 2 - denominator * inverse; // inverse mod 2^64
        inverse *= 2 - denominator * inverse; // inverse mod 2^128
        inverse *= 2 - denominator * inverse; // inverse mod 2^256

        // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
        // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
        // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inverse;
    }
}

/// @notice Calculates x*y÷1e18 with 512-bit precision.
///
/// @dev A variant of {mulDiv} with constant folding, i.e. in which the denominator is hard coded to 1e18.
///
/// Notes:
/// - The body is purposely left uncommented; to understand how this works, see the documentation in {mulDiv}.
/// - The result is rounded toward zero.
/// - We take as an axiom that the result cannot be `MAX_UINT256` when x and y solve the following system of equations:
///
/// $$
/// \begin{cases}
///     x * y = MAX\_UINT256 * UNIT \\
///     (x * y) \% UNIT \geq \frac{UNIT}{2}
/// \end{cases}
/// $$
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as an unsigned 60.18-decimal fixed-point number.
/// @param y The multiplier as an unsigned 60.18-decimal fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function mulDiv18(uint256 x, uint256 y) pure returns (uint256 result) {
    uint256 prod0;
    uint256 prod1;
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    if (prod1 == 0) {
        unchecked {
            return prod0 / UNIT;
        }
    }

    if (prod1 >= UNIT) {
        revert PRBMath_MulDiv18_Overflow(x, y);
    }

    uint256 remainder;
    assembly ("memory-safe") {
        remainder := mulmod(x, y, UNIT)
        result :=
            mul(
                or(
                    div(sub(prod0, remainder), UNIT_LPOTD),
                    mul(sub(prod1, gt(remainder, prod0)), add(div(sub(0, UNIT_LPOTD), UNIT_LPOTD), 1))
                ),
                UNIT_INVERSE
            )
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev This is an extension of {mulDiv} for signed numbers, which works by computing the signs and the absolute values separately.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - None of the inputs can be `type(int256).min`.
/// - The result must fit in int256.
///
/// @param x The multiplicand as an int256.
/// @param y The multiplier as an int256.
/// @param denominator The divisor as an int256.
/// @return result The result as an int256.
/// @custom:smtchecker abstract-function-nondet
function mulDivSigned(int256 x, int256 y, int256 denominator) pure returns (int256 result) {
    if (x == type(int256).min || y == type(int256).min || denominator == type(int256).min) {
        revert PRBMath_MulDivSigned_InputTooSmall();
    }

    // Get hold of the absolute values of x, y and the denominator.
    uint256 xAbs;
    uint256 yAbs;
    uint256 dAbs;
    unchecked {
        xAbs = x < 0 ? uint256(-x) : uint256(x);
        yAbs = y < 0 ? uint256(-y) : uint256(y);
        dAbs = denominator < 0 ? uint256(-denominator) : uint256(denominator);
    }

    // Compute the absolute value of x*y÷denominator. The result must fit in int256.
    uint256 resultAbs = mulDiv(xAbs, yAbs, dAbs);
    if (resultAbs > uint256(type(int256).max)) {
        revert PRBMath_MulDivSigned_Overflow(x, y);
    }

    // Get the signs of x, y and the denominator.
    uint256 sx;
    uint256 sy;
    uint256 sd;
    assembly ("memory-safe") {
        // "sgt" is the "signed greater than" assembly instruction and "sub(0,1)" is -1 in two's complement.
        sx := sgt(x, sub(0, 1))
        sy := sgt(y, sub(0, 1))
        sd := sgt(denominator, sub(0, 1))
    }

    // XOR over sx, sy and sd. What this does is to check whether there are 1 or 3 negative signs in the inputs.
    // If there are, the result should be negative. Otherwise, it should be positive.
    unchecked {
        result = sx ^ sy ^ sd == 0 ? -int256(resultAbs) : int256(resultAbs);
    }
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - If x is not a perfect square, the result is rounded down.
/// - Credits to OpenZeppelin for the explanations in comments below.
///
/// @param x The uint256 number for which to calculate the square root.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function sqrt(uint256 x) pure returns (uint256 result) {
    if (x == 0) {
        return 0;
    }

    // For our first guess, we calculate the biggest power of 2 which is smaller than the square root of x.
    //
    // We know that the "msb" (most significant bit) of x is a power of 2 such that we have:
    //
    // $$
    // msb(x) <= x <= 2*msb(x)$
    // $$
    //
    // We write $msb(x)$ as $2^k$, and we get:
    //
    // $$
    // k = log_2(x)
    // $$
    //
    // Thus, we can write the initial inequality as:
    //
    // $$
    // 2^{log_2(x)} <= x <= 2*2^{log_2(x)+1} \\
    // sqrt(2^k) <= sqrt(x) < sqrt(2^{k+1}) \\
    // 2^{k/2} <= sqrt(x) < 2^{(k+1)/2} <= 2^{(k/2)+1}
    // $$
    //
    // Consequently, $2^{log_2(x) /2} is a good first approximation of sqrt(x) with at least one correct bit.
    uint256 xAux = uint256(x);
    result = 1;
    if (xAux >= 2 ** 128) {
        xAux >>= 128;
        result <<= 64;
    }
    if (xAux >= 2 ** 64) {
        xAux >>= 64;
        result <<= 32;
    }
    if (xAux >= 2 ** 32) {
        xAux >>= 32;
        result <<= 16;
    }
    if (xAux >= 2 ** 16) {
        xAux >>= 16;
        result <<= 8;
    }
    if (xAux >= 2 ** 8) {
        xAux >>= 8;
        result <<= 4;
    }
    if (xAux >= 2 ** 4) {
        xAux >>= 4;
        result <<= 2;
    }
    if (xAux >= 2 ** 2) {
        result <<= 1;
    }

    // At this point, `result` is an estimation with at least one bit of precision. We know the true value has at
    // most 128 bits, since it is the square root of a uint256. Newton's method converges quadratically (precision
    // doubles at every iteration). We thus need at most 7 iteration to turn our partial result with one bit of
    // precision into the expected uint128 result.
    unchecked {
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;

        // If x is not a perfect square, round the result toward zero.
        uint256 roundedResult = x / result;
        if (result >= roundedResult) {
            result = roundedResult;
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { UD2x18 } from "./ValueType.sol";

/// @dev Euler's number as a UD2x18 number.
UD2x18 constant E = UD2x18.wrap(2_718281828459045235);

/// @dev The maximum value a UD2x18 number can have.
uint64 constant uMAX_UD2x18 = 18_446744073709551615;
UD2x18 constant MAX_UD2x18 = UD2x18.wrap(uMAX_UD2x18);

/// @dev PI as a UD2x18 number.
UD2x18 constant PI = UD2x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of UD2x18.
UD2x18 constant UNIT = UD2x18.wrap(1e18);
uint64 constant uUNIT = 1e18;

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { uMAX_UD60x18, uUNIT } from "./Constants.sol";
import { PRBMath_UD60x18_Convert_Overflow } from "./Errors.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Converts a UD60x18 number to a simple integer by dividing it by `UNIT`.
/// @dev The result is rounded toward zero.
/// @param x The UD60x18 number to convert.
/// @return result The same number in basic integer form.
function convert(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x) / uUNIT;
}

/// @notice Converts a simple integer to UD60x18 by multiplying it by `UNIT`.
///
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UD60x18 / UNIT`.
///
/// @param x The basic integer to convert.
/// @param result The same number converted to UD60x18.
function convert(uint256 x) pure returns (UD60x18 result) {
    if (x > uMAX_UD60x18 / uUNIT) {
        revert PRBMath_UD60x18_Convert_Overflow(x);
    }
    unchecked {
        result = UD60x18.wrap(x * uUNIT);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { UD2x18 } from "@prb/math/src/UD2x18.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

// DataTypes.sol
//
// This file defines all structs used in V2 Core, most of which are organized under three namespaces:
//
// - Lockup
// - LockupDynamic
// - LockupLinear
// - LockupTranched
//
// You will notice that some structs contain "slot" annotations - they are used to indicate the
// storage layout of the struct. It is more gas efficient to group small data types together so
// that they fit in a single 32-byte slot.

/// @notice Struct encapsulating the broker parameters passed to the create functions. Both can be set to zero.
/// @param account The address receiving the broker's fee.
/// @param fee The broker's percentage fee from the total amount, denoted as a fixed-point number where 1e18 is 100%.
struct Broker {
    address account;
    UD60x18 fee;
}

/// @notice Namespace for the structs used in both {SablierV2LockupLinear} and {SablierV2LockupDynamic}.
library Lockup {
    /// @notice Struct encapsulating the deposit, withdrawn, and refunded amounts, both denoted in units of the asset's
    /// decimals.
    /// @dev Because the deposited and the withdrawn amount are often read together, declaring them in the same slot
    /// saves gas.
    /// @param deposited The initial amount deposited in the stream, net of broker fee.
    /// @param withdrawn The cumulative amount withdrawn from the stream.
    /// @param refunded The amount refunded to the sender. Unless the stream was canceled, this is always zero.
    struct Amounts {
        // slot 0
        uint128 deposited;
        uint128 withdrawn;
        // slot 1
        uint128 refunded;
    }

    /// @notice Struct encapsulating the deposit amount and the broker fee amount, both denoted in units of the asset's
    /// decimals.
    /// @param deposit The amount to deposit in the stream.
    /// @param brokerFee The broker fee amount.
    struct CreateAmounts {
        uint128 deposit;
        uint128 brokerFee;
    }

    /// @notice Enum representing the different statuses of a stream.
    /// @custom:value0 PENDING Stream created but not started; assets are in a pending state.
    /// @custom:value1 STREAMING Active stream where assets are currently being streamed.
    /// @custom:value2 SETTLED All assets have been streamed; recipient is due to withdraw them.
    /// @custom:value3 CANCELED Canceled stream; remaining assets await recipient's withdrawal.
    /// @custom:value4 DEPLETED Depleted stream; all assets have been withdrawn and/or refunded.
    enum Status {
        PENDING,
        STREAMING,
        SETTLED,
        CANCELED,
        DEPLETED
    }

    /// @notice A common data structure to be stored in all {SablierV2Lockup} models.
    /// @dev The fields are arranged like this to save gas via tight variable packing.
    /// @param sender The address distributing the assets, with the ability to cancel the stream.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param endTime The Unix timestamp indicating the stream's end.
    /// @param isCancelable Boolean indicating if the stream is cancelable.
    /// @param wasCanceled Boolean indicating if the stream was canceled.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param isDepleted Boolean indicating if the stream is depleted.
    /// @param isStream Boolean indicating if the struct entity exists.
    /// @param isTransferable Boolean indicating if the stream NFT is transferable.
    /// @param amounts Struct containing the deposit, withdrawn, and refunded amounts, both denoted in units of the
    /// asset's decimals.
    struct Stream {
        // slot 0
        address sender;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        // slot 1
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        // slot 2 and 3
        Lockup.Amounts amounts;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupDynamic}.
library LockupDynamic {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupDynamic.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param segments Segments with durations used to compose the dynamic distribution function. Timestamps are
    /// calculated by starting from `block.timestamp` and adding each duration to the previous timestamp.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        SegmentWithDuration[] segments;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupDynamic.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param segments Segments used to compose the dynamic distribution function.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        uint40 startTime;
        Segment[] segments;
        Broker broker;
    }

    /// @notice Segment struct used in the Lockup Dynamic stream.
    /// @param amount The amount of assets to be streamed in the segment, denoted in units of the asset's decimals.
    /// @param exponent The exponent of the segment, denoted as a fixed-point number.
    /// @param timestamp The Unix timestamp indicating the segment's end.
    struct Segment {
        // slot 0
        uint128 amount;
        UD2x18 exponent;
        uint40 timestamp;
    }

    /// @notice Segment struct used at runtime in {SablierV2LockupDynamic.createWithDurations}.
    /// @param amount The amount of assets to be streamed in the segment, denoted in units of the asset's decimals.
    /// @param exponent The exponent of the segment, denoted as a fixed-point number.
    /// @param duration The time difference in seconds between the segment and the previous one.
    struct SegmentWithDuration {
        uint128 amount;
        UD2x18 exponent;
        uint40 duration;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the segments.
    struct StreamLD {
        address sender;
        address recipient;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        Segment[] segments;
    }

    /// @notice Struct encapsulating the LockupDynamic timestamps.
    /// @param start The Unix timestamp indicating the stream's start.
    /// @param end The Unix timestamp indicating the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 end;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupLinear}.
library LockupLinear {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupLinear.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param durations Struct containing (i) cliff period duration and (ii) total stream duration, both in seconds.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        Durations durations;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupLinear.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param timestamps Struct containing (i) the stream's start time, (ii) cliff time, and (iii) end time, all as
    /// Unix timestamps.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        Timestamps timestamps;
        Broker broker;
    }

    /// @notice Struct encapsulating the cliff duration and the total duration.
    /// @param cliff The cliff duration in seconds.
    /// @param total The total duration in seconds.
    struct Durations {
        uint40 cliff;
        uint40 total;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the cliff time.
    struct StreamLL {
        address sender;
        address recipient;
        uint40 startTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        uint40 endTime;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        uint40 cliffTime;
    }

    /// @notice Struct encapsulating the LockupLinear timestamps.
    /// @param start The Unix timestamp for the stream's start.
    /// @param cliff The Unix timestamp for the cliff period's end. A value of zero means there is no cliff.
    /// @param end The Unix timestamp for the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 cliff;
        uint40 end;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupTranched}.
library LockupTranched {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupTranched.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param tranches Tranches with durations used to compose the tranched distribution function. Timestamps are
    /// calculated by starting from `block.timestamp` and adding each duration to the previous timestamp.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        TrancheWithDuration[] tranches;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupTranched.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param tranches Tranches used to compose the tranched distribution function.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        uint40 startTime;
        Tranche[] tranches;
        Broker broker;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the tranches.
    struct StreamLT {
        address sender;
        address recipient;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        Tranche[] tranches;
    }

    /// @notice Struct encapsulating the LockupTranched timestamps.
    /// @param start The Unix timestamp indicating the stream's start.
    /// @param end The Unix timestamp indicating the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 end;
    }

    /// @notice Tranche struct used in the Lockup Tranched stream.
    /// @param amount The amount of assets to be unlocked in the tranche, denoted in units of the asset's decimals.
    /// @param timestamp The Unix timestamp indicating the tranche's end.
    struct Tranche {
        // slot 0
        uint128 amount;
        uint40 timestamp;
    }

    /// @notice Tranche struct used at runtime in {SablierV2LockupTranched.createWithDurations}.
    /// @param amount The amount of assets to be unlocked in the tranche, denoted in units of the asset's decimals.
    /// @param duration The time difference in seconds between the tranche and the previous one.
    struct TrancheWithDuration {
        uint128 amount;
        uint40 duration;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

/// @title Errors
/// @notice Library containing all custom errors the protocol may revert with.
library Errors {
    /*//////////////////////////////////////////////////////////////////////////
                             SABLIER-V2-BATCH-LOCKUP
    //////////////////////////////////////////////////////////////////////////*/

    error SablierV2BatchLockup_BatchSizeZero();

    /*//////////////////////////////////////////////////////////////////////////
                             SABLIER-V2-MERKLE-LOCKUP
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to claim after the campaign has expired.
    error SablierV2MerkleLockup_CampaignExpired(uint256 blockTimestamp, uint40 expiration);

    /// @notice Thrown when trying to create a campaign with a name that is too long.
    error SablierV2MerkleLockup_CampaignNameTooLong(uint256 nameLength, uint256 maxLength);

    /// @notice Thrown when trying to clawback when the current timestamp is over the grace period and the campaign has
    /// not expired.
    error SablierV2MerkleLockup_ClawbackNotAllowed(uint256 blockTimestamp, uint40 expiration, uint40 firstClaimTime);

    /// @notice Thrown when trying to claim with an invalid Merkle proof.
    error SablierV2MerkleLockup_InvalidProof();

    /// @notice Thrown when trying to claim the same stream more than once.
    error SablierV2MerkleLockup_StreamClaimed(uint256 index);

    /*//////////////////////////////////////////////////////////////////////////
                                SABLIER-V2-MERKLE-LT
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to claim from an LT campaign with tranches' unlock percentages not adding up to 100%.
    error SablierV2MerkleLT_TotalPercentageNotOneHundred(uint64 totalPercentage);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { wrap } from "./Casting.sol";
import { SD59x18 } from "./ValueType.sol";

/// @notice Implements the checked addition operation (+) in the SD59x18 type.
function add(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    return wrap(x.unwrap() + y.unwrap());
}

/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and(SD59x18 x, int256 bits) pure returns (SD59x18 result) {
    return wrap(x.unwrap() & bits);
}

/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and2(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    return wrap(x.unwrap() & y.unwrap());
}

/// @notice Implements the equal (=) operation in the SD59x18 type.
function eq(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() == y.unwrap();
}

/// @notice Implements the greater than operation (>) in the SD59x18 type.
function gt(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() > y.unwrap();
}

/// @notice Implements the greater than or equal to operation (>=) in the SD59x18 type.
function gte(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() >= y.unwrap();
}

/// @notice Implements a zero comparison check function in the SD59x18 type.
function isZero(SD59x18 x) pure returns (bool result) {
    result = x.unwrap() == 0;
}

/// @notice Implements the left shift operation (<<) in the SD59x18 type.
function lshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() << bits);
}

/// @notice Implements the lower than operation (<) in the SD59x18 type.
function lt(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() < y.unwrap();
}

/// @notice Implements the lower than or equal to operation (<=) in the SD59x18 type.
function lte(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() <= y.unwrap();
}

/// @notice Implements the unchecked modulo operation (%) in the SD59x18 type.
function mod(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() % y.unwrap());
}

/// @notice Implements the not equal operation (!=) in the SD59x18 type.
function neq(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() != y.unwrap();
}

/// @notice Implements the NOT (~) bitwise operation in the SD59x18 type.
function not(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(~x.unwrap());
}

/// @notice Implements the OR (|) bitwise operation in the SD59x18 type.
function or(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() | y.unwrap());
}

/// @notice Implements the right shift operation (>>) in the SD59x18 type.
function rshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() >> bits);
}

/// @notice Implements the checked subtraction operation (-) in the SD59x18 type.
function sub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() - y.unwrap());
}

/// @notice Implements the checked unary minus operation (-) in the SD59x18 type.
function unary(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(-x.unwrap());
}

/// @notice Implements the unchecked addition operation (+) in the SD59x18 type.
function uncheckedAdd(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(x.unwrap() + y.unwrap());
    }
}

/// @notice Implements the unchecked subtraction operation (-) in the SD59x18 type.
function uncheckedSub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(x.unwrap() - y.unwrap());
    }
}

/// @notice Implements the unchecked unary minus operation (-) in the SD59x18 type.
function uncheckedUnary(SD59x18 x) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(-x.unwrap());
    }
}

/// @notice Implements the XOR (^) bitwise operation in the SD59x18 type.
function xor(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() ^ y.unwrap());
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

/// @title IAdminable
/// @notice Contract module that provides a basic access control mechanism, with an admin that can be
/// granted exclusive access to specific functions. The inheriting contract must set the initial admin
/// in the constructor.
interface IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when the admin is transferred.
    /// @param oldAdmin The address of the old admin.
    /// @param newAdmin The address of the new admin.
    event TransferAdmin(address indexed oldAdmin, address indexed newAdmin);

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice The address of the admin account or contract.
    function admin() external view returns (address);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Transfers the contract admin to a new address.
    ///
    /// @dev Notes:
    /// - Does not revert if the admin is the same.
    /// - This function can potentially leave the contract without an admin, thereby removing any
    /// functionality that is only available to the admin.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    ///
    /// @param newAdmin The address of the new admin.
    function transferAdmin(address newAdmin) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

/// @notice Enum representing the gas modes on the Blast network.
/// @custom:value0 VOID base + priority fees go to the sequencer operator.
/// @custom:value1 CLAIMABLE base + priority fees spent on the protocol can be claimed separately.
enum GasMode {
    VOID,
    CLAIMABLE
}

/// @notice Enum representing the yield modes on the Blast network.
/// @custom:value0 AUTOMATIC yield is accumulated through rebasing; this changes the account balance.
/// @custom:value1 VOID No yield is earned.
/// @custom:value2 CLAIMABLE yield can be claimed separately; no change in account balance.
enum YieldMode {
    AUTOMATIC,
    VOID,
    CLAIMABLE
}

/// @title IBlast
/// @notice Interface for Blast contract.
/// @dev See: https://docs.blast.io/
interface IBlast {
    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Configures the yield and gas modes and sets the governor.
    /// @param yieldMode The yield mode to be set.
    /// @param gasMode The gas mode to be set.
    /// @param governor The address of the governor to be set.
    function configure(YieldMode yieldMode, GasMode gasMode, address governor) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { YieldMode } from "./IBlast.sol";

/// @title IERC20Rebasing
/// @notice Interface for ERC-20 rebasing assets on Blast L2.
/// @dev See: https://docs.blast.io/
interface IERC20Rebasing {
    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Query an `CLAIMABLE` account's claimable yield.
    /// @param account Address to query the claimable amount.
    /// @return amount Claimable amount.
    function getClaimableAmount(address account) external view returns (uint256 amount);

    /// @notice Query an account's configured yield mode.
    /// @param account Address to query the configuration.
    /// @return Configured yield mode.
    function getConfiguration(address account) external view returns (YieldMode);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Claim yield from a `CLAIMABLE` account and send to a recipient.
    /// @param recipient Address to receive the claimed balance.
    /// @param amount Amount to claim.
    /// @return uint256 Amount claimed.
    function claim(address recipient, uint256 amount) external returns (uint256);

    /// @notice Sets the yield mode for an ERC-20 asset.
    /// @dev This function should only be called by the contract itself.
    /// @param yieldMode Yield mode to configure.
    /// @return uint256 Current user balance
    function configure(YieldMode yieldMode) external returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4906.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";
import {IERC721} from "./IERC721.sol";

/// @title EIP-721 Metadata Update Extension
interface IERC4906 is IERC165, IERC721 {
    /// @dev This event emits when the metadata of a token is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFT.
    event MetadataUpdate(uint256 _tokenId);

    /// @dev This event emits when the metadata of a range of tokens is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFTs.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../token/ERC721/IERC721.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IAdminable } from "../IAdminable.sol";
import { IBlast, GasMode, YieldMode } from "./IBlast.sol";
import { IERC20Rebasing } from "./IERC20Rebasing.sol";

/// @title ISablierV2Blast
/// @notice This contract manages interactions with rebasing assets and configuring Blast L2's unique functionalities,
/// yield mode and gas mode.
/// @dev See: https://docs.blast.io/
interface ISablierV2Blast is IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Retrieves the claimable yield from rebasing `asset`.
    /// @dev Reverts if the yield mode is not set to `CLAIMABLE`.
    /// @param asset The address of the rebasing ERC-20 asset.
    function getClaimableRebasingAssetYield(IERC20Rebasing asset) external view returns (uint256 claimableYield);

    /// @notice Retrieves the configured yield mode from rebasing `asset`.
    /// @dev Reverts if the yield mode is not set to `CLAIMABLE`.
    /// @param asset The address of the rebasing ERC-20 asset.
    function getRebasingAssetConfiguration(IERC20Rebasing asset) external view returns (YieldMode yieldMode);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Claim the provided amount of yield assets to the `to` address.
    /// @dev Reverts if `msg.sender` is not the contract admin.
    /// @param asset The address of the ERC-20 asset.
    /// @param amount The amount to claim.
    /// @param to The address receiving the claimed assets.
    /// @return Amount claimed.
    function claimRebasingAssetYield(IERC20Rebasing asset, uint256 amount, address to) external returns (uint256);

    /// @notice Sets the yield mode for a rebasing ERC-20 asset.
    /// @dev Reverts if `msg.sender` is not the contract admin.
    /// @param asset The address of the rebasing ERC-20 asset.
    /// @param yieldMode Enum representing the yield mode to set.
    function configureRebasingAsset(IERC20Rebasing asset, YieldMode yieldMode) external;

    /// @notice configures yield and gas modes and sets the governor.
    /// @dev Reverts if `msg.sender` is not the contract admin.
    /// @param blast The address of the Blast contract.
    /// @param yieldMode Enum representing the yield mode to set.
    /// @param gasMode Enum representing the gas mode to set.
    /// @param governor The address of the governor to set.
    function configureYieldAndGas(IBlast blast, YieldMode yieldMode, GasMode gasMode, address governor) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC4906 } from "@openzeppelin/contracts/interfaces/IERC4906.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

import { Lockup } from "../types/DataTypes.sol";
import { ISablierV2Blast } from "./blast/ISablierV2Blast.sol";
import { ISablierV2NFTDescriptor } from "./ISablierV2NFTDescriptor.sol";

/// @title ISablierV2Lockup
/// @notice Common logic between all Sablier V2 Lockup contracts.
interface ISablierV2Lockup is
    IERC4906, // 2 inherited components
    ISablierV2Blast, // 1 inherited components
    IERC721Metadata // 2 inherited components
{
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when the admin allows a new recipient contract to hook to Sablier.
    /// @param admin The address of the current contract admin.
    /// @param recipient The address of the recipient contract put on the allowlist.
    event AllowToHook(address indexed admin, address recipient);

    /// @notice Emitted when a stream is canceled.
    /// @param streamId The ID of the stream.
    /// @param sender The address of the stream's sender.
    /// @param recipient The address of the stream's recipient.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param senderAmount The amount of assets refunded to the stream's sender, denoted in units of the asset's
    /// decimals.
    /// @param recipientAmount The amount of assets left for the stream's recipient to withdraw, denoted in units of the
    /// asset's decimals.
    event CancelLockupStream(
        uint256 streamId,
        address indexed sender,
        address indexed recipient,
        IERC20 indexed asset,
        uint128 senderAmount,
        uint128 recipientAmount
    );

    /// @notice Emitted when a sender gives up the right to cancel a stream.
    /// @param streamId The ID of the stream.
    event RenounceLockupStream(uint256 indexed streamId);

    /// @notice Emitted when the admin sets a new NFT descriptor contract.
    /// @param admin The address of the current contract admin.
    /// @param oldNFTDescriptor The address of the old NFT descriptor contract.
    /// @param newNFTDescriptor The address of the new NFT descriptor contract.
    event SetNFTDescriptor(
        address indexed admin, ISablierV2NFTDescriptor oldNFTDescriptor, ISablierV2NFTDescriptor newNFTDescriptor
    );

    /// @notice Emitted when assets are withdrawn from a stream.
    /// @param streamId The ID of the stream.
    /// @param to The address that has received the withdrawn assets.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param amount The amount of assets withdrawn, denoted in units of the asset's decimals.
    event WithdrawFromLockupStream(uint256 indexed streamId, address indexed to, IERC20 indexed asset, uint128 amount);

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Retrieves the address of the ERC-20 asset to be distributed.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getAsset(uint256 streamId) external view returns (IERC20 asset);

    /// @notice Retrieves the amount deposited in the stream, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getDepositedAmount(uint256 streamId) external view returns (uint128 depositedAmount);

    /// @notice Retrieves the stream's end time, which is a Unix timestamp.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getEndTime(uint256 streamId) external view returns (uint40 endTime);

    /// @notice Retrieves the stream's recipient.
    /// @dev Reverts if the NFT has been burned.
    /// @param streamId The stream ID for the query.
    function getRecipient(uint256 streamId) external view returns (address recipient);

    /// @notice Retrieves the amount refunded to the sender after a cancellation, denoted in units of the asset's
    /// decimals. This amount is always zero unless the stream was canceled.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getRefundedAmount(uint256 streamId) external view returns (uint128 refundedAmount);

    /// @notice Retrieves the stream's sender.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getSender(uint256 streamId) external view returns (address sender);

    /// @notice Retrieves the stream's start time, which is a Unix timestamp.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getStartTime(uint256 streamId) external view returns (uint40 startTime);

    /// @notice Retrieves the amount withdrawn from the stream, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getWithdrawnAmount(uint256 streamId) external view returns (uint128 withdrawnAmount);

    /// @notice Retrieves a flag indicating whether the provided address is a contract allowed to hook to Sablier
    /// when a stream is canceled or when assets are withdrawn.
    /// @dev See {ISablierLockupRecipient} for more information.
    function isAllowedToHook(address recipient) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream can be canceled. When the stream is cold, this
    /// flag is always `false`.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isCancelable(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is cold, i.e. settled, canceled, or depleted.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isCold(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is depleted.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isDepleted(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream exists.
    /// @dev Does not revert if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isStream(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream NFT can be transferred.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isTransferable(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is warm, i.e. either pending or streaming.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isWarm(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves the maximum broker fee that can be charged by the broker, denoted as a fixed-point
    /// number where 1e18 is 100%.
    /// @dev This value is hard coded as a constant.
    function MAX_BROKER_FEE() external view returns (UD60x18);

    /// @notice Counter for stream IDs, used in the create functions.
    function nextStreamId() external view returns (uint256);

    /// @notice Contract that generates the non-fungible token URI.
    function nftDescriptor() external view returns (ISablierV2NFTDescriptor);

    /// @notice Calculates the amount that the sender would be refunded if the stream were canceled, denoted in units
    /// of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function refundableAmountOf(uint256 streamId) external view returns (uint128 refundableAmount);

    /// @notice Retrieves the stream's status.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function statusOf(uint256 streamId) external view returns (Lockup.Status status);

    /// @notice Calculates the amount streamed to the recipient, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    ///
    /// Notes:
    /// - Upon cancellation of the stream, the amount streamed is calculated as the difference between the deposited
    /// amount and the refunded amount. Ultimately, when the stream becomes depleted, the streamed amount is equivalent
    /// to the total amount withdrawn.
    ///
    /// @param streamId The stream ID for the query.
    function streamedAmountOf(uint256 streamId) external view returns (uint128 streamedAmount);

    /// @notice Retrieves a flag indicating whether the stream was canceled.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function wasCanceled(uint256 streamId) external view returns (bool result);

    /// @notice Calculates the amount that the recipient can withdraw from the stream, denoted in units of the asset's
    /// decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function withdrawableAmountOf(uint256 streamId) external view returns (uint128 withdrawableAmount);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Allows a recipient contract to hook to Sablier when a stream is canceled or when assets are withdrawn.
    /// Useful for implementing contracts that hold streams on behalf of users, such as vaults or staking contracts.
    ///
    /// @dev Emits an {AllowToHook} event.
    ///
    /// Notes:
    /// - Does not revert if the contract is already on the allowlist.
    /// - This is an irreversible operation. The contract cannot be removed from the allowlist.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    /// - `recipient` must have a non-zero code size.
    /// - `recipient` must implement {ISablierLockupRecipient}.
    ///
    /// @param recipient The address of the contract to allow for hooks.
    function allowToHook(address recipient) external;

    /// @notice Burns the NFT associated with the stream.
    ///
    /// @dev Emits a {Transfer} event.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must reference a depleted stream.
    /// - The NFT must exist.
    /// - `msg.sender` must be either the NFT owner or an approved third party.
    ///
    /// @param streamId The ID of the stream NFT to burn.
    function burn(uint256 streamId) external;

    /// @notice Cancels the stream and refunds any remaining assets to the sender.
    ///
    /// @dev Emits a {Transfer}, {CancelLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - If there any assets left for the recipient to withdraw, the stream is marked as canceled. Otherwise, the
    /// stream is marked as depleted.
    /// - This function attempts to invoke a hook on the recipient, if the resolved address is a contract.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - The stream must be warm and cancelable.
    /// - `msg.sender` must be the stream's sender.
    ///
    /// @param streamId The ID of the stream to cancel.
    function cancel(uint256 streamId) external;

    /// @notice Cancels multiple streams and refunds any remaining assets to the sender.
    ///
    /// @dev Emits multiple {Transfer}, {CancelLockupStream}, and {MetadataUpdate} events.
    ///
    /// Notes:
    /// - Refer to the notes in {cancel}.
    ///
    /// Requirements:
    /// - All requirements from {cancel} must be met for each stream.
    ///
    /// @param streamIds The IDs of the streams to cancel.
    function cancelMultiple(uint256[] calldata streamIds) external;

    /// @notice Removes the right of the stream's sender to cancel the stream.
    ///
    /// @dev Emits a {RenounceLockupStream} and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - This is an irreversible operation.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must reference a warm stream.
    /// - `msg.sender` must be the stream's sender.
    /// - The stream must be cancelable.
    ///
    /// @param streamId The ID of the stream to renounce.
    function renounce(uint256 streamId) external;

    /// @notice Sets a new NFT descriptor contract, which produces the URI describing the Sablier stream NFTs.
    ///
    /// @dev Emits a {SetNFTDescriptor} and {BatchMetadataUpdate} event.
    ///
    /// Notes:
    /// - Does not revert if the NFT descriptor is the same.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    ///
    /// @param newNFTDescriptor The address of the new NFT descriptor contract.
    function setNFTDescriptor(ISablierV2NFTDescriptor newNFTDescriptor) external;

    /// @notice Withdraws the provided amount of assets from the stream to the `to` address.
    ///
    /// @dev Emits a {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - This function attempts to call a hook on the recipient of the stream, unless `msg.sender` is the recipient.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must not reference a null or depleted stream.
    /// - `to` must not be the zero address.
    /// - `amount` must be greater than zero and must not exceed the withdrawable amount.
    /// - `to` must be the recipient if `msg.sender` is not the stream's recipient or an approved third party.
    ///
    /// @param streamId The ID of the stream to withdraw from.
    /// @param to The address receiving the withdrawn assets.
    /// @param amount The amount to withdraw, denoted in units of the asset's decimals.
    function withdraw(uint256 streamId, address to, uint128 amount) external;

    /// @notice Withdraws the maximum withdrawable amount from the stream to the provided address `to`.
    ///
    /// @dev Emits a {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - Refer to the notes in {withdraw}.
    ///
    /// Requirements:
    /// - Refer to the requirements in {withdraw}.
    ///
    /// @param streamId The ID of the stream to withdraw from.
    /// @param to The address receiving the withdrawn assets.
    /// @return withdrawnAmount The amount withdrawn, denoted in units of the asset's decimals.
    function withdrawMax(uint256 streamId, address to) external returns (uint128 withdrawnAmount);

    /// @notice Withdraws the maximum withdrawable amount from the stream to the current recipient, and transfers the
    /// NFT to `newRecipient`.
    ///
    /// @dev Emits a {WithdrawFromLockupStream} and a {Transfer} event.
    ///
    /// Notes:
    /// - If the withdrawable amount is zero, the withdrawal is skipped.
    /// - Refer to the notes in {withdraw}.
    ///
    /// Requirements:
    /// - `msg.sender` must be the stream's recipient.
    /// - Refer to the requirements in {withdraw}.
    /// - Refer to the requirements in {IERC721.transferFrom}.
    ///
    /// @param streamId The ID of the stream NFT to transfer.
    /// @param newRecipient The address of the new owner of the stream NFT.
    /// @return withdrawnAmount The amount withdrawn, denoted in units of the asset's decimals.
    function withdrawMaxAndTransfer(
        uint256 streamId,
        address newRecipient
    )
        external
        returns (uint128 withdrawnAmount);

    /// @notice Withdraws assets from streams to the recipient of each stream.
    ///
    /// @dev Emits multiple {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} events.
    ///
    /// Notes:
    /// - This function attempts to call a hook on the recipient of each stream, unless `msg.sender` is the recipient.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - There must be an equal number of `streamIds` and `amounts`.
    /// - Each stream ID in the array must not reference a null or depleted stream.
    /// - Each amount in the array must be greater than zero and must not exceed the withdrawable amount.
    ///
    /// @param streamIds The IDs of the streams to withdraw from.
    /// @param amounts The amounts to withdraw, denoted in units of the asset's decimals.
    function withdrawMultiple(uint256[] calldata streamIds, uint128[] calldata amounts) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import { Lockup, LockupLinear } from "../types/DataTypes.sol";
import { ISablierV2Lockup } from "./ISablierV2Lockup.sol";

/// @title ISablierV2LockupLinear
/// @notice Creates and manages Lockup streams with a linear distribution function.
interface ISablierV2LockupLinear is ISablierV2Lockup {
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when a stream is created.
    /// @param streamId The ID of the newly created stream.
    /// @param funder The address which funded the stream.
    /// @param sender The address distributing the assets, which will have the ability to cancel the stream.
    /// @param recipient The address receiving the assets.
    /// @param amounts Struct containing (i) the deposit amount, and (ii) the broker fee amount, both denoted
    /// in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Boolean indicating whether the stream will be cancelable or not.
    /// @param transferable Boolean indicating whether the stream NFT is transferable or not.
    /// @param timestamps Struct containing (i) the stream's start time, (ii) cliff time, and (iii) end time, all as
    /// Unix timestamps.
    /// @param broker The address of the broker who has helped create the stream, e.g. a front-end website.
    event CreateLockupLinearStream(
        uint256 streamId,
        address funder,
        address indexed sender,
        address indexed recipient,
        Lockup.CreateAmounts amounts,
        IERC20 indexed asset,
        bool cancelable,
        bool transferable,
        LockupLinear.Timestamps timestamps,
        address broker
    );

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Retrieves the stream's cliff time, which is a Unix timestamp.  A value of zero means there
    /// is no cliff.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getCliffTime(uint256 streamId) external view returns (uint40 cliffTime);

    /// @notice Retrieves the full stream details.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    /// @return stream See the documentation in {DataTypes}.
    function getStream(uint256 streamId) external view returns (LockupLinear.StreamLL memory stream);

    /// @notice Retrieves the stream's start, cliff and end timestamps.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    /// @return timestamps See the documentation in {DataTypes}.
    function getTimestamps(uint256 streamId) external view returns (LockupLinear.Timestamps memory timestamps);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Creates a stream by setting the start time to `block.timestamp`, and the end time to
    /// the sum of `block.timestamp` and `params.durations.total`. The stream is funded by `msg.sender` and is wrapped
    /// in an ERC-721 NFT.
    ///
    /// @dev Emits a {Transfer} and {CreateLockupLinearStream} event.
    ///
    /// Requirements:
    /// - All requirements in {createWithTimestamps} must be met for the calculated parameters.
    ///
    /// @param params Struct encapsulating the function parameters, which are documented in {DataTypes}.
    /// @return streamId The ID of the newly created stream.
    function createWithDurations(LockupLinear.CreateWithDurations calldata params)
        external
        returns (uint256 streamId);

    /// @notice Creates a stream with the provided start time and end time. The stream is funded by `msg.sender` and is
    /// wrapped in an ERC-721 NFT.
    ///
    /// @dev Emits a {Transfer} and {CreateLockupLinearStream} event.
    ///
    /// Notes:
    /// - A cliff time of zero means there is no cliff.
    /// - As long as the times are ordered, it is not an error for the start or the cliff time to be in the past.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `params.totalAmount` must be greater than zero.
    /// - If set, `params.broker.fee` must not be greater than `MAX_BROKER_FEE`.
    /// - `params.timestamps.start` must be greater than zero and less than `params.timestamps.end`.
    /// - If set, `params.timestamps.cliff` must be greater than `params.timestamps.start` and less than
    /// `params.timestamps.end`.
    /// - `params.timestamps.end` must be in the future.
    /// - `params.recipient` must not be the zero address.
    /// - `msg.sender` must have allowed this contract to spend at least `params.totalAmount` assets.
    ///
    /// @param params Struct encapsulating the function parameters, which are documented in {DataTypes}.
    /// @return streamId The ID of the newly created stream.
    function createWithTimestamps(LockupLinear.CreateWithTimestamps calldata params)
        external
        returns (uint256 streamId);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { ISablierV2LockupLinear } from "@sablier/v2-core/src/interfaces/ISablierV2LockupLinear.sol";

import { ISablierV2MerkleLockup } from "./ISablierV2MerkleLockup.sol";

/// @title ISablierV2MerkleLL
/// @notice MerkleLockup campaign that creates LockupLinear streams.
interface ISablierV2MerkleLL is ISablierV2MerkleLockup {
    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice The address of the {SablierV2LockupLinear} contract.
    function LOCKUP_LINEAR() external view returns (ISablierV2LockupLinear);

    /// @notice The total streaming duration of each stream.
    function streamDurations() external view returns (uint40 cliff, uint40 duration);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Makes the claim by creating a LockupLinear stream to the recipient. A stream NFT is minted to the
    /// recipient.
    ///
    /// @dev Emits a {Claim} event.
    ///
    /// Requirements:
    /// - The campaign must not have expired.
    /// - The stream must not have been claimed already.
    /// - The Merkle proof must be valid.
    ///
    /// @param index The index of the recipient in the Merkle tree.
    /// @param recipient The address of the stream holder.
    /// @param amount The amount of ERC-20 assets to be distributed via the claimed stream.
    /// @param merkleProof The proof of inclusion in the Merkle tree.
    /// @return streamId The id of the newly created stream.
    function claim(
        uint256 index,
        address recipient,
        uint128 amount,
        bytes32[] calldata merkleProof
    )
        external
        returns (uint256 streamId);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IAdminable } from "@sablier/v2-core/src/interfaces/IAdminable.sol";

/// @title ISablierV2MerkleLockup
/// @notice A contract that lets user claim Sablier streams using Merkle proofs. A popular use case for MerkleLockup
/// is airstreams: a portmanteau of "airdrop" and "stream". This is an airdrop model where the tokens are distributed
/// over time, as opposed to all at once.
/// @dev This is the base interface for MerkleLockup. See the Sablier docs for more guidance: https://docs.sablier.com
interface ISablierV2MerkleLockup is IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when a recipient claims a stream.
    event Claim(uint256 index, address indexed recipient, uint128 amount, uint256 indexed streamId);

    /// @notice Emitted when the admin claws back the unclaimed tokens.
    event Clawback(address indexed admin, address indexed to, uint128 amount);

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice The ERC-20 asset to distribute.
    /// @dev This is an immutable state variable.
    function ASSET() external returns (IERC20);

    /// @notice A flag indicating whether the streams can be canceled.
    /// @dev This is an immutable state variable.
    function CANCELABLE() external returns (bool);

    /// @notice The cut-off point for the campaign, as a Unix timestamp. A value of zero means there is no expiration.
    /// @dev This is an immutable state variable.
    function EXPIRATION() external returns (uint40);

    /// @notice Returns the timestamp when the first claim is made.
    function getFirstClaimTime() external view returns (uint40);

    /// @notice Returns a flag indicating whether a claim has been made for a given index.
    /// @dev Uses a bitmap to save gas.
    /// @param index The index of the recipient to check.
    function hasClaimed(uint256 index) external returns (bool);

    /// @notice Returns a flag indicating whether the campaign has expired.
    function hasExpired() external view returns (bool);

    /// @notice The content identifier for indexing the campaign on IPFS.
    function ipfsCID() external view returns (string memory);

    /// @notice The root of the Merkle tree used to validate the proofs of inclusion.
    /// @dev This is an immutable state variable.
    function MERKLE_ROOT() external returns (bytes32);

    /// @notice Retrieves the name of the campaign.
    function name() external returns (string memory);

    /// @notice A flag indicating whether the stream NFTs are transferable.
    /// @dev This is an immutable state variable.
    function TRANSFERABLE() external returns (bool);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Claws back the unclaimed tokens from the campaign.
    ///
    /// @dev Emits a {Clawback} event.
    ///
    /// Requirements:
    /// - The caller must be the admin.
    /// - No claim must be made, OR
    ///   The current timestamp must not exceed 7 days after the first claim, OR
    ///   The campaign must be expired.
    ///
    /// @param to The address to receive the tokens.
    /// @param amount The amount of tokens to claw back.
    function clawback(address to, uint128 amount) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";

/// @title ISablierV2NFTDescriptor
/// @notice This contract generates the URI describing the Sablier V2 stream NFTs.
/// @dev Inspired by Uniswap V3 Positions NFTs.
interface ISablierV2NFTDescriptor {
    /// @notice Produces the URI describing a particular stream NFT.
    /// @dev This is a data URI with the JSON contents directly inlined.
    /// @param sablier The address of the Sablier contract the stream was created in.
    /// @param streamId The ID of the stream for which to produce a description.
    /// @return uri The URI of the ERC721-compliant metadata.
    function tokenURI(IERC721Metadata sablier, uint256 streamId) external view returns (string memory uri);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import { wrap } from "./Casting.sol";
import {
    uEXP_MAX_INPUT,
    uEXP2_MAX_INPUT,
    uHALF_UNIT,
    uLOG2_10,
    uLOG2_E,
    uMAX_UD60x18,
    uMAX_WHOLE_UD60x18,
    UNIT,
    uUNIT,
    uUNIT_SQUARED,
    ZERO
} from "./Constants.sol";
import { UD60x18 } from "./ValueType.sol";

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the arithmetic average of x and y using the following formula:
///
/// $$
/// avg(x, y) = (x & y) + ((xUint ^ yUint) / 2)
/// $$
///
/// In English, this is what this formula does:
///
/// 1. AND x and y.
/// 2. Calculate half of XOR x and y.
/// 3. Add the two results together.
///
/// This technique is known as SWAR, which stands for "SIMD within a register". You can read more about it here:
/// https://devblogs.microsoft.com/oldnewthing/20220207-00/?p=106223
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The arithmetic average as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function avg(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    unchecked {
        result = wrap((xUint & yUint) + ((xUint ^ yUint) >> 1));
    }
}

/// @notice Yields the smallest whole number greater than or equal to x.
///
/// @dev This is optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional
/// counterparts. See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to `MAX_WHOLE_UD60x18`.
///
/// @param x The UD60x18 number to ceil.
/// @param result The smallest whole number greater than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ceil(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint > uMAX_WHOLE_UD60x18) {
        revert Errors.PRBMath_UD60x18_Ceil_Overflow(x);
    }

    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `UNIT - remainder`.
        let delta := sub(uUNIT, remainder)

        // Equivalent to `x + remainder > 0 ? delta : 0`.
        result := add(x, mul(delta, gt(remainder, 0)))
    }
}

/// @notice Divides two UD60x18 numbers, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @param x The numerator as a UD60x18 number.
/// @param y The denominator as a UD60x18 number.
/// @param result The quotient as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function div(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv(x.unwrap(), uUNIT, y.unwrap()));
}

/// @notice Calculates the natural exponent of x using the following formula:
///
/// $$
/// e^x = 2^{x * log_2{e}}
/// $$
///
/// @dev Requirements:
/// - x must be less than 133_084258667509499441.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // This check prevents values greater than 192e18 from being passed to {exp2}.
    if (xUint > uEXP_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp_InputTooBig(x);
    }

    unchecked {
        // Inline the fixed-point multiplication to save gas.
        uint256 doubleUnitProduct = xUint * uLOG2_E;
        result = exp2(wrap(doubleUnitProduct / uUNIT));
    }
}

/// @notice Calculates the binary exponent of x using the binary fraction method.
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693
///
/// Requirements:
/// - x must be less than 192e18.
/// - The result must fit in UD60x18.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // Numbers greater than or equal to 192e18 don't fit in the 192.64-bit format.
    if (xUint > uEXP2_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp2_InputTooBig(x);
    }

    // Convert x to the 192.64-bit fixed-point format.
    uint256 x_192x64 = (xUint << 64) / uUNIT;

    // Pass x to the {Common.exp2} function, which uses the 192.64-bit fixed-point number representation.
    result = wrap(Common.exp2(x_192x64));
}

/// @notice Yields the greatest whole number less than or equal to x.
/// @dev Optimized for fractional value inputs, because every whole value has (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
/// @param x The UD60x18 number to floor.
/// @param result The greatest whole number less than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function floor(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `x - remainder > 0 ? remainder : 0)`.
        result := sub(x, mul(remainder, gt(remainder, 0)))
    }
}

/// @notice Yields the excess beyond the floor of x using the odd function definition.
/// @dev See https://en.wikipedia.org/wiki/Fractional_part.
/// @param x The UD60x18 number to get the fractional part of.
/// @param result The fractional part of x as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function frac(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        result := mod(x, uUNIT)
    }
}

/// @notice Calculates the geometric mean of x and y, i.e. $\sqrt{x * y}$, rounding down.
///
/// @dev Requirements:
/// - x * y must fit in UD60x18.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function gm(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    if (xUint == 0 || yUint == 0) {
        return ZERO;
    }

    unchecked {
        // Checking for overflow this way is faster than letting Solidity do it.
        uint256 xyUint = xUint * yUint;
        if (xyUint / xUint != yUint) {
            revert Errors.PRBMath_UD60x18_Gm_Overflow(x, y);
        }

        // We don't need to multiply the result by `UNIT` here because the x*y product picked up a factor of `UNIT`
        // during multiplication. See the comments in {Common.sqrt}.
        result = wrap(Common.sqrt(xyUint));
    }
}

/// @notice Calculates the inverse of x.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must not be zero.
///
/// @param x The UD60x18 number for which to calculate the inverse.
/// @return result The inverse as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function inv(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(uUNIT_SQUARED / x.unwrap());
    }
}

/// @notice Calculates the natural logarithm of x using the following formula:
///
/// $$
/// ln{x} = log_2{x} / log_2{e}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
/// - The precision isn't sufficiently fine-grained to return exactly `UNIT` when the input is `E`.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the natural logarithm.
/// @return result The natural logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ln(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        // Inline the fixed-point multiplication to save gas. This is overflow-safe because the maximum value that
        // {log2} can return is ~196_205294292027477728.
        result = wrap(log2(x).unwrap() * uUNIT / uLOG2_E);
    }
}

/// @notice Calculates the common logarithm of x using the following formula:
///
/// $$
/// log_{10}{x} = log_2{x} / log_2{10}
/// $$
///
/// However, if x is an exact power of ten, a hard coded value is returned.
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the common logarithm.
/// @return result The common logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log10(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    // Note that the `mul` in this assembly block is the standard multiplication operation, not {UD60x18.mul}.
    // prettier-ignore
    assembly ("memory-safe") {
        switch x
        case 1 { result := mul(uUNIT, sub(0, 18)) }
        case 10 { result := mul(uUNIT, sub(1, 18)) }
        case 100 { result := mul(uUNIT, sub(2, 18)) }
        case 1000 { result := mul(uUNIT, sub(3, 18)) }
        case 10000 { result := mul(uUNIT, sub(4, 18)) }
        case 100000 { result := mul(uUNIT, sub(5, 18)) }
        case 1000000 { result := mul(uUNIT, sub(6, 18)) }
        case 10000000 { result := mul(uUNIT, sub(7, 18)) }
        case 100000000 { result := mul(uUNIT, sub(8, 18)) }
        case 1000000000 { result := mul(uUNIT, sub(9, 18)) }
        case 10000000000 { result := mul(uUNIT, sub(10, 18)) }
        case 100000000000 { result := mul(uUNIT, sub(11, 18)) }
        case 1000000000000 { result := mul(uUNIT, sub(12, 18)) }
        case 10000000000000 { result := mul(uUNIT, sub(13, 18)) }
        case 100000000000000 { result := mul(uUNIT, sub(14, 18)) }
        case 1000000000000000 { result := mul(uUNIT, sub(15, 18)) }
        case 10000000000000000 { result := mul(uUNIT, sub(16, 18)) }
        case 100000000000000000 { result := mul(uUNIT, sub(17, 18)) }
        case 1000000000000000000 { result := 0 }
        case 10000000000000000000 { result := uUNIT }
        case 100000000000000000000 { result := mul(uUNIT, 2) }
        case 1000000000000000000000 { result := mul(uUNIT, 3) }
        case 10000000000000000000000 { result := mul(uUNIT, 4) }
        case 100000000000000000000000 { result := mul(uUNIT, 5) }
        case 1000000000000000000000000 { result := mul(uUNIT, 6) }
        case 10000000000000000000000000 { result := mul(uUNIT, 7) }
        case 100000000000000000000000000 { result := mul(uUNIT, 8) }
        case 1000000000000000000000000000 { result := mul(uUNIT, 9) }
        case 10000000000000000000000000000 { result := mul(uUNIT, 10) }
        case 100000000000000000000000000000 { result := mul(uUNIT, 11) }
        case 1000000000000000000000000000000 { result := mul(uUNIT, 12) }
        case 10000000000000000000000000000000 { result := mul(uUNIT, 13) }
        case 100000000000000000000000000000000 { result := mul(uUNIT, 14) }
        case 1000000000000000000000000000000000 { result := mul(uUNIT, 15) }
        case 10000000000000000000000000000000000 { result := mul(uUNIT, 16) }
        case 100000000000000000000000000000000000 { result := mul(uUNIT, 17) }
        case 1000000000000000000000000000000000000 { result := mul(uUNIT, 18) }
        case 10000000000000000000000000000000000000 { result := mul(uUNIT, 19) }
        case 100000000000000000000000000000000000000 { result := mul(uUNIT, 20) }
        case 1000000000000000000000000000000000000000 { result := mul(uUNIT, 21) }
        case 10000000000000000000000000000000000000000 { result := mul(uUNIT, 22) }
        case 100000000000000000000000000000000000000000 { result := mul(uUNIT, 23) }
        case 1000000000000000000000000000000000000000000 { result := mul(uUNIT, 24) }
        case 10000000000000000000000000000000000000000000 { result := mul(uUNIT, 25) }
        case 100000000000000000000000000000000000000000000 { result := mul(uUNIT, 26) }
        case 1000000000000000000000000000000000000000000000 { result := mul(uUNIT, 27) }
        case 10000000000000000000000000000000000000000000000 { result := mul(uUNIT, 28) }
        case 100000000000000000000000000000000000000000000000 { result := mul(uUNIT, 29) }
        case 1000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 30) }
        case 10000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 31) }
        case 100000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 32) }
        case 1000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 33) }
        case 10000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 34) }
        case 100000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 35) }
        case 1000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 36) }
        case 10000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 37) }
        case 100000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 38) }
        case 1000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 39) }
        case 10000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 40) }
        case 100000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 41) }
        case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 42) }
        case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 43) }
        case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 44) }
        case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 45) }
        case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 46) }
        case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 47) }
        case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 48) }
        case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 49) }
        case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 50) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 51) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 52) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 53) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 54) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 55) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 56) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 57) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 58) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 59) }
        default { result := uMAX_UD60x18 }
    }

    if (result.unwrap() == uMAX_UD60x18) {
        unchecked {
            // Inline the fixed-point division to save gas.
            result = wrap(log2(x).unwrap() * uUNIT / uLOG2_10);
        }
    }
}

/// @notice Calculates the binary logarithm of x using the iterative approximation algorithm:
///
/// $$
/// log_2{x} = n + log_2{y}, \text{ where } y = x*2^{-n}, \ y \in [1, 2)
/// $$
///
/// For $0 \leq x \lt 1$, the input is inverted:
///
/// $$
/// log_2{x} = -log_2{\frac{1}{x}}
/// $$
///
/// @dev See https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
///
/// Notes:
/// - Due to the lossy precision of the iterative approximation, the results are not perfectly accurate to the last decimal.
///
/// Requirements:
/// - x must be greater than zero.
///
/// @param x The UD60x18 number for which to calculate the binary logarithm.
/// @return result The binary logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    unchecked {
        // Calculate the integer part of the logarithm.
        uint256 n = Common.msb(xUint / uUNIT);

        // This is the integer part of the logarithm as a UD60x18 number. The operation can't overflow because n
        // n is at most 255 and UNIT is 1e18.
        uint256 resultUint = n * uUNIT;

        // Calculate $y = x * 2^{-n}$.
        uint256 y = xUint >> n;

        // If y is the unit number, the fractional part is zero.
        if (y == uUNIT) {
            return wrap(resultUint);
        }

        // Calculate the fractional part via the iterative approximation.
        // The `delta >>= 1` part is equivalent to `delta /= 2`, but shifting bits is more gas efficient.
        uint256 DOUBLE_UNIT = 2e18;
        for (uint256 delta = uHALF_UNIT; delta > 0; delta >>= 1) {
            y = (y * y) / uUNIT;

            // Is y^2 >= 2e18 and so in the range [2e18, 4e18)?
            if (y >= DOUBLE_UNIT) {
                // Add the 2^{-m} factor to the logarithm.
                resultUint += delta;

                // Halve y, which corresponds to z/2 in the Wikipedia article.
                y >>= 1;
            }
        }
        result = wrap(resultUint);
    }
}

/// @notice Multiplies two UD60x18 numbers together, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @dev See the documentation in {Common.mulDiv18}.
/// @param x The multiplicand as a UD60x18 number.
/// @param y The multiplier as a UD60x18 number.
/// @return result The product as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function mul(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv18(x.unwrap(), y.unwrap()));
}

/// @notice Raises x to the power of y.
///
/// For $1 \leq x \leq \infty$, the following standard formula is used:
///
/// $$
/// x^y = 2^{log_2{x} * y}
/// $$
///
/// For $0 \leq x \lt 1$, since the unsigned {log2} is undefined, an equivalent formula is used:
///
/// $$
/// i = \frac{1}{x}
/// w = 2^{log_2{i} * y}
/// x^y = \frac{1}{w}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2} and {mul}.
/// - Returns `UNIT` for 0^0.
/// - It may not perform well with very small values of x. Consider using SD59x18 as an alternative.
///
/// Requirements:
/// - Refer to the requirements in {exp2}, {log2}, and {mul}.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function pow(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();

    // If both x and y are zero, the result is `UNIT`. If just x is zero, the result is always zero.
    if (xUint == 0) {
        return yUint == 0 ? UNIT : ZERO;
    }
    // If x is `UNIT`, the result is always `UNIT`.
    else if (xUint == uUNIT) {
        return UNIT;
    }

    // If y is zero, the result is always `UNIT`.
    if (yUint == 0) {
        return UNIT;
    }
    // If y is `UNIT`, the result is always x.
    else if (yUint == uUNIT) {
        return x;
    }

    // If x is greater than `UNIT`, use the standard formula.
    if (xUint > uUNIT) {
        result = exp2(mul(log2(x), y));
    }
    // Conversely, if x is less than `UNIT`, use the equivalent formula.
    else {
        UD60x18 i = wrap(uUNIT_SQUARED / xUint);
        UD60x18 w = exp2(mul(log2(i), y));
        result = wrap(uUNIT_SQUARED / w.unwrap());
    }
}

/// @notice Raises x (a UD60x18 number) to the power y (an unsigned basic integer) using the well-known
/// algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv18}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - The result must fit in UD60x18.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a uint256.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function powu(UD60x18 x, uint256 y) pure returns (UD60x18 result) {
    // Calculate the first iteration of the loop in advance.
    uint256 xUint = x.unwrap();
    uint256 resultUint = y & 1 > 0 ? xUint : uUNIT;

    // Equivalent to `for(y /= 2; y > 0; y /= 2)`.
    for (y >>= 1; y > 0; y >>= 1) {
        xUint = Common.mulDiv18(xUint, xUint);

        // Equivalent to `y % 2 == 1`.
        if (y & 1 > 0) {
            resultUint = Common.mulDiv18(resultUint, xUint);
        }
    }
    result = wrap(resultUint);
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must be less than `MAX_UD60x18 / UNIT`.
///
/// @param x The UD60x18 number for which to calculate the square root.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function sqrt(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    unchecked {
        if (xUint > uMAX_UD60x18 / uUNIT) {
            revert Errors.PRBMath_UD60x18_Sqrt_Overflow(x);
        }
        // Multiply x by `UNIT` to account for the factor of `UNIT` picked up when multiplying two UD60x18 numbers.
        // In this case, the two numbers are both the square root.
        result = wrap(Common.sqrt(xUint * uUNIT));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.20;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the Merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates Merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     *@dev The multiproof provided is not valid.
     */
    error MerkleProofInvalidMultiproof();

    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     */
    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Sorts the pair (a, b) and hashes the result.
     */
    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    /**
     * @dev Implementation of keccak256(abi.encode(a, b)) that doesn't allocate or expand memory.
     */
    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { BitMaps } from "@openzeppelin/contracts/utils/structs/BitMaps.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ud } from "@prb/math/src/UD60x18.sol";
import { ISablierV2LockupLinear } from "@sablier/v2-core/src/interfaces/ISablierV2LockupLinear.sol";
import { Broker, LockupLinear } from "@sablier/v2-core/src/types/DataTypes.sol";

import { SablierV2MerkleLockup } from "./abstracts/SablierV2MerkleLockup.sol";
import { ISablierV2MerkleLL } from "./interfaces/ISablierV2MerkleLL.sol";
import { MerkleLockup } from "./types/DataTypes.sol";

/// @title SablierV2MerkleLL
/// @notice See the documentation in {ISablierV2MerkleLL}.
contract SablierV2MerkleLL is
    ISablierV2MerkleLL, // 2 inherited components
    SablierV2MerkleLockup // 4 inherited components
{
    using BitMaps for BitMaps.BitMap;
    using SafeERC20 for IERC20;

    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2MerkleLL
    ISablierV2LockupLinear public immutable override LOCKUP_LINEAR;

    /// @inheritdoc ISablierV2MerkleLL
    LockupLinear.Durations public override streamDurations;

    /*//////////////////////////////////////////////////////////////////////////
                                    CONSTRUCTOR
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Constructs the contract by initializing the immutable state variables, and max approving the Sablier
    /// contract.
    constructor(
        MerkleLockup.ConstructorParams memory baseParams,
        ISablierV2LockupLinear lockupLinear,
        LockupLinear.Durations memory streamDurations_
    )
        SablierV2MerkleLockup(baseParams)
    {
        LOCKUP_LINEAR = lockupLinear;
        streamDurations = streamDurations_;

        // Max approve the Sablier contract to spend funds from the MerkleLockup contract.
        ASSET.forceApprove(address(LOCKUP_LINEAR), type(uint256).max);
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2MerkleLL
    function claim(
        uint256 index,
        address recipient,
        uint128 amount,
        bytes32[] calldata merkleProof
    )
        external
        override
        returns (uint256 streamId)
    {
        // Generate the Merkle tree leaf by hashing the corresponding parameters. Hashing twice prevents second
        // preimage attacks.
        bytes32 leaf = keccak256(bytes.concat(keccak256(abi.encode(index, recipient, amount))));

        // Check: validate the function.
        _checkClaim(index, leaf, merkleProof);

        // Effect: mark the index as claimed.
        _claimedBitMap.set(index);

        // Interaction: create the stream via {SablierV2LockupLinear}.
        streamId = LOCKUP_LINEAR.createWithDurations(
            LockupLinear.CreateWithDurations({
                sender: admin,
                recipient: recipient,
                totalAmount: amount,
                asset: ASSET,
                cancelable: CANCELABLE,
                transferable: TRANSFERABLE,
                durations: streamDurations,
                broker: Broker({ account: address(0), fee: ud(0) })
            })
        );

        // Log the claim.
        emit Claim(index, recipient, amount, streamId);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MerkleProof } from "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import { BitMaps } from "@openzeppelin/contracts/utils/structs/BitMaps.sol";
import { Adminable } from "@sablier/v2-core/src/abstracts/Adminable.sol";

import { ISablierV2MerkleLockup } from "../interfaces/ISablierV2MerkleLockup.sol";
import { MerkleLockup } from "../types/DataTypes.sol";
import { Errors } from "../libraries/Errors.sol";

/// @title SablierV2MerkleLockup
/// @notice See the documentation in {ISablierV2MerkleLockup}.
abstract contract SablierV2MerkleLockup is
    ISablierV2MerkleLockup, // 2 inherited component
    Adminable // 1 inherited component
{
    using BitMaps for BitMaps.BitMap;
    using SafeERC20 for IERC20;

    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2MerkleLockup
    IERC20 public immutable override ASSET;

    /// @inheritdoc ISablierV2MerkleLockup
    bool public immutable override CANCELABLE;

    /// @inheritdoc ISablierV2MerkleLockup
    uint40 public immutable override EXPIRATION;

    /// @inheritdoc ISablierV2MerkleLockup
    bytes32 public immutable override MERKLE_ROOT;

    /// @dev The name of the campaign stored as bytes32.
    bytes32 internal immutable NAME;

    /// @inheritdoc ISablierV2MerkleLockup
    bool public immutable override TRANSFERABLE;

    /// @inheritdoc ISablierV2MerkleLockup
    string public ipfsCID;

    /// @dev Packed booleans that record the history of claims.
    BitMaps.BitMap internal _claimedBitMap;

    /// @dev The timestamp when the first claim is made.
    uint40 internal _firstClaimTime;

    /*//////////////////////////////////////////////////////////////////////////
                                    CONSTRUCTOR
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Constructs the contract by initializing the immutable state variables.
    constructor(MerkleLockup.ConstructorParams memory params) {
        // Check: the campaign name is not greater than 32 bytes
        if (bytes(params.name).length > 32) {
            revert Errors.SablierV2MerkleLockup_CampaignNameTooLong({
                nameLength: bytes(params.name).length,
                maxLength: 32
            });
        }

        admin = params.initialAdmin;
        ASSET = params.asset;
        CANCELABLE = params.cancelable;
        EXPIRATION = params.expiration;
        ipfsCID = params.ipfsCID;
        MERKLE_ROOT = params.merkleRoot;
        NAME = bytes32(abi.encodePacked(params.name));
        TRANSFERABLE = params.transferable;
    }

    /*//////////////////////////////////////////////////////////////////////////
                           USER-FACING CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2MerkleLockup
    function getFirstClaimTime() external view override returns (uint40) {
        return _firstClaimTime;
    }

    /// @inheritdoc ISablierV2MerkleLockup
    function hasClaimed(uint256 index) public view override returns (bool) {
        return _claimedBitMap.get(index);
    }

    /// @inheritdoc ISablierV2MerkleLockup
    function hasExpired() public view override returns (bool) {
        return EXPIRATION > 0 && EXPIRATION <= block.timestamp;
    }

    /// @inheritdoc ISablierV2MerkleLockup
    function name() external view override returns (string memory) {
        return string(abi.encodePacked(NAME));
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2MerkleLockup
    function clawback(address to, uint128 amount) external override onlyAdmin {
        // Check: current timestamp is over the grace period and the campaign has not expired.
        if (_hasGracePeriodPassed() && !hasExpired()) {
            revert Errors.SablierV2MerkleLockup_ClawbackNotAllowed({
                blockTimestamp: block.timestamp,
                expiration: EXPIRATION,
                firstClaimTime: _firstClaimTime
            });
        }

        // Effect: transfer the tokens to the provided address.
        ASSET.safeTransfer(to, amount);

        // Log the clawback.
        emit Clawback(admin, to, amount);
    }

    /*//////////////////////////////////////////////////////////////////////////
                            INTERNAL CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Returns a flag indicating whether the grace period has passed.
    /// @dev The grace period is 7 days after the first claim.
    function _hasGracePeriodPassed() internal view returns (bool) {
        return _firstClaimTime > 0 && block.timestamp > _firstClaimTime + 7 days;
    }

    /*//////////////////////////////////////////////////////////////////////////
                           INTERNAL NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Validates the parameters of the `claim` function, which is implemented by child contracts.
    function _checkClaim(uint256 index, bytes32 leaf, bytes32[] calldata merkleProof) internal {
        // Check: the campaign has not expired.
        if (hasExpired()) {
            revert Errors.SablierV2MerkleLockup_CampaignExpired({
                blockTimestamp: block.timestamp,
                expiration: EXPIRATION
            });
        }

        // Check: the index has not been claimed.
        if (_claimedBitMap.get(index)) {
            revert Errors.SablierV2MerkleLockup_StreamClaimed(index);
        }

        // Check: the input claim is included in the Merkle tree.
        if (!MerkleProof.verify(merkleProof, MERKLE_ROOT, leaf)) {
            revert Errors.SablierV2MerkleLockup_InvalidProof();
        }

        // Effect: set the `_firstClaimTime` if its zero.
        if (_firstClaimTime == 0) {
            _firstClaimTime = uint40(block.timestamp);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

/*

██████╗ ██████╗ ██████╗ ███╗   ███╗ █████╗ ████████╗██╗  ██╗
██╔══██╗██╔══██╗██╔══██╗████╗ ████║██╔══██╗╚══██╔══╝██║  ██║
██████╔╝██████╔╝██████╔╝██╔████╔██║███████║   ██║   ███████║
██╔═══╝ ██╔══██╗██╔══██╗██║╚██╔╝██║██╔══██║   ██║   ██╔══██║
██║     ██║  ██║██████╔╝██║ ╚═╝ ██║██║  ██║   ██║   ██║  ██║
╚═╝     ╚═╝  ╚═╝╚═════╝ ╚═╝     ╚═╝╚═╝  ╚═╝   ╚═╝   ╚═╝  ╚═╝

██╗   ██╗██████╗ ██████╗ ██╗  ██╗ ██╗ █████╗
██║   ██║██╔══██╗╚════██╗╚██╗██╔╝███║██╔══██╗
██║   ██║██║  ██║ █████╔╝ ╚███╔╝ ╚██║╚█████╔╝
██║   ██║██║  ██║██╔═══╝  ██╔██╗  ██║██╔══██╗
╚██████╔╝██████╔╝███████╗██╔╝ ██╗ ██║╚█████╔╝
 ╚═════╝ ╚═════╝ ╚══════╝╚═╝  ╚═╝ ╚═╝ ╚════╝

*/

import "./ud2x18/Casting.sol";
import "./ud2x18/Constants.sol";
import "./ud2x18/Errors.sol";
import "./ud2x18/ValueType.sol";

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

/*

██████╗ ██████╗ ██████╗ ███╗   ███╗ █████╗ ████████╗██╗  ██╗
██╔══██╗██╔══██╗██╔══██╗████╗ ████║██╔══██╗╚══██╔══╝██║  ██║
██████╔╝██████╔╝██████╔╝██╔████╔██║███████║   ██║   ███████║
██╔═══╝ ██╔══██╗██╔══██╗██║╚██╔╝██║██╔══██║   ██║   ██╔══██║
██║     ██║  ██║██████╔╝██║ ╚═╝ ██║██║  ██║   ██║   ██║  ██║
╚═╝     ╚═╝  ╚═╝╚═════╝ ╚═╝     ╚═╝╚═╝  ╚═╝   ╚═╝   ╚═╝  ╚═╝

██╗   ██╗██████╗  ██████╗  ██████╗ ██╗  ██╗ ██╗ █████╗
██║   ██║██╔══██╗██╔════╝ ██╔═████╗╚██╗██╔╝███║██╔══██╗
██║   ██║██║  ██║███████╗ ██║██╔██║ ╚███╔╝ ╚██║╚█████╔╝
██║   ██║██║  ██║██╔═══██╗████╔╝██║ ██╔██╗  ██║██╔══██╗
╚██████╔╝██████╔╝╚██████╔╝╚██████╔╝██╔╝ ██╗ ██║╚█████╔╝
 ╚═════╝ ╚═════╝  ╚═════╝  ╚═════╝ ╚═╝  ╚═╝ ╚═╝ ╚════╝

*/

import "./ud60x18/Casting.sol";
import "./ud60x18/Constants.sol";
import "./ud60x18/Conversions.sol";
import "./ud60x18/Errors.sol";
import "./ud60x18/Helpers.sol";
import "./ud60x18/Math.sol";
import "./ud60x18/ValueType.sol";

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Casting.sol" as Casting;
import "./Helpers.sol" as Helpers;
import "./Math.sol" as Math;

/// @notice The signed 59.18-decimal fixed-point number representation, which can have up to 59 digits and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the underlying Solidity
/// type int256.
type SD59x18 is int256;

/*//////////////////////////////////////////////////////////////////////////
                                    CASTING
//////////////////////////////////////////////////////////////////////////*/

using {
    Casting.intoInt256,
    Casting.intoSD1x18,
    Casting.intoUD2x18,
    Casting.intoUD60x18,
    Casting.intoUint256,
    Casting.intoUint128,
    Casting.intoUint40,
    Casting.unwrap
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

using {
    Math.abs,
    Math.avg,
    Math.ceil,
    Math.div,
    Math.exp,
    Math.exp2,
    Math.floor,
    Math.frac,
    Math.gm,
    Math.inv,
    Math.log10,
    Math.log2,
    Math.ln,
    Math.mul,
    Math.pow,
    Math.powu,
    Math.sqrt
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                HELPER FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

using {
    Helpers.add,
    Helpers.and,
    Helpers.eq,
    Helpers.gt,
    Helpers.gte,
    Helpers.isZero,
    Helpers.lshift,
    Helpers.lt,
    Helpers.lte,
    Helpers.mod,
    Helpers.neq,
    Helpers.not,
    Helpers.or,
    Helpers.rshift,
    Helpers.sub,
    Helpers.uncheckedAdd,
    Helpers.uncheckedSub,
    Helpers.uncheckedUnary,
    Helpers.xor
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                    OPERATORS
//////////////////////////////////////////////////////////////////////////*/

// The global "using for" directive makes it possible to use these operators on the SD59x18 type.
using {
    Helpers.add as +,
    Helpers.and2 as &,
    Math.div as /,
    Helpers.eq as ==,
    Helpers.gt as >,
    Helpers.gte as >=,
    Helpers.lt as <,
    Helpers.lte as <=,
    Helpers.mod as %,
    Math.mul as *,
    Helpers.neq as !=,
    Helpers.not as ~,
    Helpers.or as |,
    Helpers.sub as -,
    Helpers.unary as -,
    Helpers.xor as ^
} for SD59x18 global;

{
  "compilationTarget": {
    "src/SablierV2MerkleLL.sol": "SablierV2MerkleLL"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": [
    ":@openzeppelin/contracts/=node_modules/@openzeppelin/contracts/",
    ":@prb/math/=node_modules/@prb/math/",
    ":@sablier/v2-core/=node_modules/@sablier/v2-core/",
    ":forge-std/=node_modules/forge-std/",
    ":solady/=node_modules/solady/"
  ],
  "viaIR": true
}