// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.17;

import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "../access/Ownable2Step.sol";

contract Attestable is Ownable2Step {
    // ============ Events ============
    /**
     * @notice Emitted when an attester is enabled
     * @param attester newly enabled attester
     */
    event AttesterEnabled(address indexed attester);

    /**
     * @notice Emitted when an attester is disabled
     * @param attester newly disabled attester
     */
    event AttesterDisabled(address indexed attester);

    /**
     * @notice Emitted when threshold number of attestations (m in m/n multisig) is updated
     * @param oldSignatureThreshold old signature threshold
     * @param newSignatureThreshold new signature threshold
     */
    event SignatureThresholdUpdated(
        uint256 oldSignatureThreshold,
        uint256 newSignatureThreshold
    );

    /**
     * @dev Emitted when attester manager address is updated
     * @param previousAttesterManager representing the address of the previous attester manager
     * @param newAttesterManager representing the address of the new attester manager
     */
    event AttesterManagerUpdated(
        address indexed previousAttesterManager,
        address indexed newAttesterManager
    );

    // ============ Libraries ============
    using EnumerableSet for EnumerableSet.AddressSet;

    // ============ State Variables ============
    // number of signatures from distinct attesters required for a message to be received (m in m/n multisig)
    uint256 public signatureThreshold;

    // 65-byte ECDSA signature: v (32) + r (32) + s (1)
    uint256 internal constant signatureLength = 65;

    // enabled attesters (message signers)
    // (length of enabledAttesters is n in m/n multisig of message signers)
    EnumerableSet.AddressSet private enabledAttesters;

    // Attester Manager of the contract
    address private _attesterManager;

    // ============ Modifiers ============
    /**
     * @dev Throws if called by any account other than the attester manager.
     */
    modifier onlyAttesterManager() {
        require(msg.sender == _attesterManager, "Caller not attester manager");
        _;
    }

    // ============ Constructor ============
    /**
     * @dev The constructor sets the original attester manager of the contract to the sender account.
     * @param attester attester to initialize
     */
    constructor(address attester) {
        _setAttesterManager(msg.sender);
        // Initially 1 signature is required. Threshold can be increased by attesterManager.
        signatureThreshold = 1;
        enableAttester(attester);
    }

    // ============ Public/External Functions  ============
    /**
     * @notice Enables an attester
     * @dev Only callable by attesterManager. New attester must be nonzero, and currently disabled.
     * @param newAttester attester to enable
     */
    function enableAttester(address newAttester) public onlyAttesterManager {
        require(newAttester != address(0), "New attester must be nonzero");
        require(enabledAttesters.add(newAttester), "Attester already enabled");
        emit AttesterEnabled(newAttester);
    }

    /**
     * @notice returns true if given `attester` is enabled, else false
     * @param attester attester to check enabled status of
     * @return true if given `attester` is enabled, else false
     */
    function isEnabledAttester(address attester) public view returns (bool) {
        return enabledAttesters.contains(attester);
    }

    /**
     * @notice returns the number of enabled attesters
     * @return number of enabled attesters
     */
    function getNumEnabledAttesters() public view returns (uint256) {
        return enabledAttesters.length();
    }

    /**
     * @dev Allows the current attester manager to transfer control of the contract to a newAttesterManager.
     * @param newAttesterManager The address to update attester manager to.
     */
    function updateAttesterManager(address newAttesterManager)
        external
        onlyOwner
    {
        require(
            newAttesterManager != address(0),
            "Invalid attester manager address"
        );
        address _oldAttesterManager = _attesterManager;
        _setAttesterManager(newAttesterManager);
        emit AttesterManagerUpdated(_oldAttesterManager, newAttesterManager);
    }

    /**
     * @notice Disables an attester
     * @dev Only callable by attesterManager. Disabling the attester is not allowed if there is only one attester
     * enabled, or if it would cause the number of enabled attesters to become less than signatureThreshold.
     * (Attester must be currently enabled.)
     * @param attester attester to disable
     */
    function disableAttester(address attester) external onlyAttesterManager {
        // Disallow disabling attester if there is only 1 active attester
        uint256 _numEnabledAttesters = getNumEnabledAttesters();

        require(_numEnabledAttesters > 1, "Too few enabled attesters");

        // Disallow disabling an attester if it would cause the n in m/n multisig to fall below m (threshold # of signers).
        require(
            _numEnabledAttesters > signatureThreshold,
            "Signature threshold is too low"
        );

        require(enabledAttesters.remove(attester), "Attester already disabled");
        emit AttesterDisabled(attester);
    }

    /**
     * @notice Sets the threshold of signatures required to attest to a message.
     * (This is the m in m/n multisig.)
     * @dev new signature threshold must be nonzero, and must not exceed number
     * of enabled attesters.
     * @param newSignatureThreshold new signature threshold
     */
    function setSignatureThreshold(uint256 newSignatureThreshold)
        external
        onlyAttesterManager
    {
        require(newSignatureThreshold != 0, "Invalid signature threshold");

        // New signature threshold cannot exceed the number of enabled attesters
        require(
            newSignatureThreshold <= enabledAttesters.length(),
            "New signature threshold too high"
        );

        require(
            newSignatureThreshold != signatureThreshold,
            "Signature threshold already set"
        );

        uint256 _oldSignatureThreshold = signatureThreshold;
        signatureThreshold = newSignatureThreshold;
        emit SignatureThresholdUpdated(
            _oldSignatureThreshold,
            signatureThreshold
        );
    }

    /**
     * @dev Returns the address of the attester manager
     * @return address of the attester manager
     */
    function attesterManager() external view returns (address) {
        return _attesterManager;
    }

    /**
     * @notice gets enabled attester at given `index`
     * @param index index of attester to check
     * @return enabled attester at given `index`
     */
    function getEnabledAttester(uint256 index) external view returns (address) {
        return enabledAttesters.at(index);
    }

    // ============ Internal Utils ============
    /**
     * @dev Sets a new attester manager address
     * @param _newAttesterManager attester manager address to set
     */
    function _setAttesterManager(address _newAttesterManager) internal {
        _attesterManager = _newAttesterManager;
    }

    /**
     * @notice reverts if the attestation, which is comprised of one or more concatenated 65-byte signatures, is invalid.
     * @dev Rules for valid attestation:
     * 1. length of `_attestation` == 65 (signature length) * signatureThreshold
     * 2. addresses recovered from attestation must be in increasing order.
     * For example, if signature A is signed by address 0x1..., and signature B
     * is signed by address 0x2..., attestation must be passed as AB.
     * 3. no duplicate signers
     * 4. all signers must be enabled attesters
     *
     * Based on Christian Lundkvist's Simple Multisig
     * (https://github.com/christianlundkvist/simple-multisig/tree/560c463c8651e0a4da331bd8f245ccd2a48ab63d)
     * @param _message message to verify attestation of
     * @param _attestation attestation of `_message`
     */
    function _verifyAttestationSignatures(
        bytes calldata _message,
        bytes calldata _attestation
    ) internal view {
        require(
            _attestation.length == signatureLength * signatureThreshold,
            "Invalid attestation length"
        );

        // (Attesters cannot be address(0))
        address _latestAttesterAddress = address(0);
        // Address recovered from signatures must be in increasing order, to prevent duplicates

        bytes32 _digest = keccak256(_message);

        for (uint256 i; i < signatureThreshold; ++i) {
            bytes memory _signature = _attestation[i * signatureLength:i *
                signatureLength +
                signatureLength];

            address _recoveredAttester = _recoverAttesterSignature(
                _digest,
                _signature
            );

            // Signatures must be in increasing order of address, and may not duplicate signatures from same address
            require(
                _recoveredAttester > _latestAttesterAddress,
                "Invalid signature order or dupe"
            );
            require(
                isEnabledAttester(_recoveredAttester),
                "Invalid signature: not attester"
            );
            _latestAttesterAddress = _recoveredAttester;
        }
    }

    /**
     * @notice Checks that signature was signed by attester
     * @param _digest message hash
     * @param _signature message signature
     * @return address of recovered signer
     **/
    function _recoverAttesterSignature(bytes32 _digest, bytes memory _signature)
        internal
        pure
        returns (address)
    {
        return (ECDSA.recover(_digest, _signature));
    }
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity 0.8.17;

import "./libraries/Utils.sol";
import "./roles/Attestable.sol";
import "./interfaces/IBridge.sol";
import "./interfaces/IReceiver.sol";
import "./interfaces/ICallProxy.sol";
import "./interfaces/ITokenMessenger.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

contract Bridge is IBridge, Attestable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;

    address public feeCollector;
    address public tokenMessenger;
    address public callProxy;

    // destination domain => destination bridge
    mapping(uint32 => bytes32) public bridgeHashMap;

    // token => disabled
    mapping(address => bool) public disabledBridgeTokens;

    // token, destination domain => disabled
    mapping(address => mapping(uint32 => bool)) public disabledRoutes;

    event SetTokenMessenger(address tokenMessenger);
    event SetFeeCollector(address feeCollector);
    event SetCallProxy(address callProxy);
    event EnableBridgeToken(address token);
    event DisableBridgeToken(address token);
    event EnableRoute(address token, uint32 destinationDomain);
    event DisableRoute(address token, uint32 destinationDomain);
    event BindBridge(uint32 destinationDomain, bytes32 targetBridge);
    event BindBridgeBatch(uint32[] destinationDomains, bytes32[] targetBridges);

    event BridgeOut(
        address sender,
        address token,
        uint32 destinationDomain,
        uint256 amount,
        uint64 nonce,
        bytes32 recipient,
        bytes callData,
        uint256 fee
    );

    event BridgeIn(
        address sender,
        address recipient,
        address token,
        uint256 amount
    );

    struct TxArgs {
        address token;
        bytes message;
        bytes mintAttestation;
        bytes32 recipient;
        bytes callData;
    }

    receive() external payable { }

    constructor(
        address _tokenMessenger,
        address _attester,
        address _feeCollector
        ) Attestable(_attester) {
        require(_tokenMessenger != address(0), "tokenMessenger address cannot be zero");
        require(_feeCollector != address(0), "feeCollector address cannot be zero");

        tokenMessenger = _tokenMessenger;
        feeCollector = _feeCollector;
    }

    function bridgeOut(
        address token,
        uint256 amount,
        uint32 destinationDomain,
        bytes32 recipient,
        bytes calldata callData
    ) external payable nonReentrant whenNotPaused {
        bytes32 targetBridge = bridgeHashMap[destinationDomain];

        require(targetBridge != bytes32(0), "target bridge not enabled");
        require(msg.sender != callProxy, "forbidden");
        require(recipient != bytes32(0), "recipient address cannot be zero");
        require(!disabledBridgeTokens[token], "token not enabled");
        require(!disabledRoutes[token][destinationDomain], "route disabled");

        IERC20(token).safeTransferFrom(msg.sender, address(this), amount);
        IERC20(token).safeApprove(tokenMessenger, amount);
        uint64 nonce = ITokenMessenger(tokenMessenger).depositForBurnWithCaller(
            amount, destinationDomain, targetBridge, token, targetBridge
        );

        sendNative(feeCollector, msg.value);
        emit BridgeOut(msg.sender, token, destinationDomain, amount, nonce, recipient, callData, msg.value);
    }

    function bridgeIn(
        bytes calldata args,
        bytes calldata attestation
    ) external nonReentrant whenNotPaused {
        require(args.length > 0, "invalid bridgeIn args");

        _verifyAttestationSignatures(args, attestation);

        TxArgs memory txArgs = deserializeTxArgs(args);
        address token = txArgs.token;

        uint256 balanceBefore = IERC20(token).balanceOf(address(this));
        bool success = _getMessageTransmitter().receiveMessage(txArgs.message, txArgs.mintAttestation);
        require(success, "receive message failed");
        uint256 amount = IERC20(token).balanceOf(address(this)) - balanceBefore;
        require(amount > 0, "amount cannot be zero");

        address recipient = bytes32ToAddress(txArgs.recipient);
        require(recipient != address(0), "recipient address cannot be zero");

        if (txArgs.callData.length == 0 || callProxy == address(0)) {
            IERC20(token).safeTransfer(recipient, amount);
        } else {
            IERC20(token).safeTransfer(callProxy, amount);
            require(ICallProxy(callProxy).proxyCall(token, amount, recipient, txArgs.callData), "proxy call failed");
        }

        emit BridgeIn(msg.sender, recipient, token, amount);
    }

    function getMessageTransmitter() external view returns (IReceiver) {
        return _getMessageTransmitter();
    }

    function _getMessageTransmitter() internal view returns (IReceiver) {
        return IReceiver(ITokenMessenger(tokenMessenger).localMessageTransmitter());
    }

    function setTokenMessenger(address newTokenMessenger) onlyOwner external {
        require(newTokenMessenger != address(0), "tokenMessenger address cannot be zero");

        tokenMessenger = newTokenMessenger;
        emit SetTokenMessenger(newTokenMessenger);
    }

    function enableBridgeToken(address token) external onlyOwner {
        require(token != address(0), "token address cannot be zero");
        delete disabledBridgeTokens[token];
        emit EnableBridgeToken(token);
    }

    function disableBridgeToken(address token) external onlyOwner {
        require(token != address(0), "token address cannot be zero");
        disabledBridgeTokens[token] = true;
        emit DisableBridgeToken(token);
    }

    function enableRouter(address token, uint32 destinationDomain) external onlyOwner {
        require(token != address(0), "token address cannot be zero");
        delete disabledRoutes[token][destinationDomain];
        emit EnableRoute(token, destinationDomain);
    }

    function disableRoute(address token, uint32 destinationDomain) external onlyOwner {
        require(token != address(0), "token address cannot be zero");
        disabledRoutes[token][destinationDomain] = true;
        emit DisableRoute(token, destinationDomain);
    }

    function setCallProxy(address newCallProxy) onlyOwner external {
        callProxy = newCallProxy;
        emit SetCallProxy(newCallProxy);
    }

    function setFeeCollector(address newFeeCollector) external onlyOwner {
        require(newFeeCollector != address(0), "feeCollector address cannot be zero");

        feeCollector = newFeeCollector;
        emit SetFeeCollector(newFeeCollector);
    }

    function bindBridge(uint32 destinationDomain, bytes32 targetBridge) onlyOwner external returns (bool) {
        bridgeHashMap[destinationDomain] = targetBridge;
        emit BindBridge(destinationDomain, targetBridge);
        return true;
    }

    function bindBridgeBatch(uint32[] calldata destinationDomains, bytes32[] calldata targetBridgeHashes) onlyOwner external returns (bool) {
        require(destinationDomains.length == targetBridgeHashes.length, "Inconsistent parameter lengths");

        for (uint i = 0; i < destinationDomains.length; i++) {
            bridgeHashMap[destinationDomains[i]] = targetBridgeHashes[i];
        }

        emit BindBridgeBatch(destinationDomains, targetBridgeHashes);
        return true;
    }

    function externalCall(address callee, bytes calldata data) external onlyOwner {
        (bool success, ) = callee.call(data);
        require(success, "external call failed");
    }

    function rescueFund(address tokenAddress) external onlyOwner {
        IERC20 token = IERC20(tokenAddress);
        token.safeTransfer(_msgSender(), token.balanceOf(address(this)));
    }

    function rescueNative(address receiver) external onlyOwner {
        sendNative(receiver, address(this).balance);
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    function sendNative(address receiver, uint256 amount) internal {
        (bool success, ) = receiver.call{ value: amount }("");
        require(success, "unable to send value, recipient may have reverted");
    }

    function deserializeTxArgs(bytes calldata rawArgs) internal pure returns (TxArgs memory) {
        TxArgs memory txArgs;
        uint256 offset = 0;

        bytes memory tokenBytes;
        (tokenBytes, offset) = Utils.NextVarBytes(rawArgs, offset);
        txArgs.token = Utils.bytesToAddress(tokenBytes);

        (txArgs.message, offset) = Utils.NextVarBytes(rawArgs, offset);
        (txArgs.mintAttestation, offset) = Utils.NextVarBytes(rawArgs, offset);

        bytes memory recipientBytes;
        (recipientBytes, offset) = Utils.NextVarBytes(rawArgs, offset);
        txArgs.recipient = addressToBytes32(Utils.bytesToAddress(recipientBytes));

        (txArgs.callData, offset) = Utils.NextVarBytes(rawArgs, offset);

        return txArgs;
    }

    // May revert if current chain does not implement the `BASEFEE` opcode
    function getBasefee() external view returns (uint256 basefee) {
        basefee = block.basefee;
    }

    function addressToBytes32(address addr) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(addr)));
    }

    function bytes32ToAddress(bytes32 _buf) internal pure returns (address) {
        return address(uint160(uint256(_buf)));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity ^0.8.0;

interface IBridge {
    function callProxy() external returns (address);

    function bridgeOut(
        address token,
        uint256 amount,
        uint32 destinationDomain,
        bytes32 recipient,
        bytes calldata callData
    ) external payable;

    function bridgeIn(
        bytes calldata args,
        bytes calldata attestation
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity 0.8.17;

interface ICallProxy {
    function proxyCall(
        address token,
        uint256 amount,
        address receiver,
        bytes memory callData
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.17;

import "./IReceiver.sol";

/**
 * @title IMessageTransmitter
 * @notice Interface for message transmitters, which both relay and receive messages.
 */
interface IMessageTransmitter is IReceiver {
    function localDomain() external view returns (uint32);
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.17;

/**
 * @title IReceiver
 * @notice Receives messages on destination chain and forwards them to IMessageDestinationHandler
 */
interface IReceiver {
    /**
     * @notice Receives an incoming message, validating the header and passing
     * the body to application-specific handler.
     * @param message The message raw bytes
     * @param signature The message signature
     * @return success bool, true if successful
     */
    function receiveMessage(bytes calldata message, bytes calldata signature)
        external
        returns (bool success);
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity 0.8.17;

import "./IMessageTransmitter.sol";

interface ITokenMessenger {
    function depositForBurn(
        uint256 amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken
    ) external returns (uint64 _nonce);

    function depositForBurnWithCaller(
        uint256 amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken,
        bytes32 destinationCaller
    ) external returns (uint64 nonce);



    function localMessageTransmitter() external view returns (IMessageTransmitter);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity 0.8.17;

import "@openzeppelin/contracts/utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.17;

import "./Ownable.sol";

/**
 * @dev forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/7c5f6bc2c8743d83443fa46395d75f2f3f99054a/contracts/access/Ownable2Step.sol
 * Modifications:
 * 1. Update Solidity version from 0.8.0 to 0.7.6. Version 0.8.0 was used
 * as base because this contract was added to OZ repo after version 0.8.0.
 *
 * Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner)
        public
        virtual
        override
        onlyOwner
    {
        require(newOwner != address(0), "new owner address cannot be zero");
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() external {
        address sender = _msgSender();
        require(
            pendingOwner() == sender,
            "Ownable2Step: caller is not the new owner"
        );
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: AGPL-3.0

pragma solidity ^0.8.0;

library Utils {

    function WriteByte(bytes1 b) internal pure returns (bytes memory) {
        return WriteUint8(uint8(b));
    }

    function WriteUint8(uint8 v) internal pure returns (bytes memory) {
        bytes memory buff;
        assembly{
            buff := mload(0x40)
            mstore(buff, 1)
            mstore(add(buff, 0x20), shl(248, v))
            // mstore(add(buff, 0x20), byte(0x1f, v))
            mstore(0x40, add(buff, 0x21))
        }
        return buff;
    }

    function WriteUint16(uint16 v) internal pure returns (bytes memory) {
        bytes memory buff;

        assembly{
            buff := mload(0x40)
            let byteLen := 0x02
            mstore(buff, byteLen)
            for {
                let mindex := 0x00
                let vindex := 0x1f
            } lt(mindex, byteLen) {
                mindex := add(mindex, 0x01)
                vindex := sub(vindex, 0x01)
            }{
                mstore8(add(add(buff, 0x20), mindex), byte(vindex, v))
            }
            mstore(0x40, add(buff, 0x22))
        }
        return buff;
    }

    function WriteUint32(uint32 v) internal pure returns(bytes memory) {
        bytes memory buff;
        assembly{
            buff := mload(0x40)
            let byteLen := 0x04
            mstore(buff, byteLen)
            for {
                let mindex := 0x00
                let vindex := 0x1f
            } lt(mindex, byteLen) {
                mindex := add(mindex, 0x01)
                vindex := sub(vindex, 0x01)
            }{
                mstore8(add(add(buff, 0x20), mindex), byte(vindex, v))
            }
            mstore(0x40, add(buff, 0x24))
        }
        return buff;
    }

    function WriteUint64(uint64 v) internal pure returns(bytes memory) {
        bytes memory buff;

        assembly{
            buff := mload(0x40)
            let byteLen := 0x08
            mstore(buff, byteLen)
            for {
                let mindex := 0x00
                let vindex := 0x1f
            } lt(mindex, byteLen) {
                mindex := add(mindex, 0x01)
                vindex := sub(vindex, 0x01)
            }{
                mstore8(add(add(buff, 0x20), mindex), byte(vindex, v))
            }
            mstore(0x40, add(buff, 0x28))
        }
        return buff;
    }

    function WriteUint255(uint256 v) internal pure returns (bytes memory) {
        require(v <= 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff, "Value exceeds uint255 range");
        bytes memory buff;

        assembly{
            buff := mload(0x40)
            let byteLen := 0x20
            mstore(buff, byteLen)
            for {
                let mindex := 0x00
                let vindex := 0x1f
            } lt(mindex, byteLen) {
                mindex := add(mindex, 0x01)
                vindex := sub(vindex, 0x01)
            }{
                mstore8(add(add(buff, 0x20), mindex), byte(vindex, v))
            }
            mstore(0x40, add(buff, 0x40))
        }
        return buff;
    }

    function WriteVarBytes(bytes memory data) internal pure returns (bytes memory) {
        uint64 l = uint64(data.length);
        return abi.encodePacked(WriteVarUint(l), data);
    }

    function WriteVarUint(uint64 v) internal pure returns (bytes memory) {
        if (v < 0xFD){
    		return WriteUint8(uint8(v));
    	} else if (v <= 0xFFFF) {
    		return abi.encodePacked(WriteByte(0xFD), WriteUint16(uint16(v)));
    	} else if (v <= 0xFFFFFFFF) {
            return abi.encodePacked(WriteByte(0xFE), WriteUint32(uint32(v)));
    	} else {
    		return abi.encodePacked(WriteByte(0xFF), WriteUint64(uint64(v)));
    	}
    }

    function NextByte(bytes memory buff, uint256 offset) internal pure returns (bytes1, uint256) {
        require(offset + 1 <= buff.length && offset < offset + 1, "NextByte, Offset exceeds maximum");
        bytes1 v;
        assembly{
            v := mload(add(add(buff, 0x20), offset))
        }
        return (v, offset + 1);
    }

    function NextUint8(bytes memory buff, uint256 offset) internal pure returns (uint8, uint256) {
        require(offset + 1 <= buff.length && offset < offset + 1, "NextUint8, Offset exceeds maximum");
        uint8 v;
        assembly{
            let tmpbytes := mload(0x40)
            let bvalue := mload(add(add(buff, 0x20), offset))
            mstore8(tmpbytes, byte(0, bvalue))
            mstore(0x40, add(tmpbytes, 0x01))
            v := mload(sub(tmpbytes, 0x1f))
        }
        return (v, offset + 1);
    }

    function NextUint16(bytes memory buff, uint256 offset) internal pure returns (uint16, uint256) {
        require(offset + 2 <= buff.length && offset < offset + 2, "NextUint16, offset exceeds maximum");

        uint16 v;
        assembly {
            let tmpbytes := mload(0x40)
            let bvalue := mload(add(add(buff, 0x20), offset))
            mstore8(tmpbytes, byte(0x01, bvalue))
            mstore8(add(tmpbytes, 0x01), byte(0, bvalue))
            mstore(0x40, add(tmpbytes, 0x02))
            v := mload(sub(tmpbytes, 0x1e))
        }
        return (v, offset + 2);
    }

    function NextUint32(bytes memory buff, uint256 offset) internal pure returns (uint32, uint256) {
        require(offset + 4 <= buff.length && offset < offset + 4, "NextUint32, offset exceeds maximum");
        uint32 v;
        assembly {
            let tmpbytes := mload(0x40)
            let byteLen := 0x04
            for {
                let tindex := 0x00
                let bindex := sub(byteLen, 0x01)
                let bvalue := mload(add(add(buff, 0x20), offset))
            } lt(tindex, byteLen) {
                tindex := add(tindex, 0x01)
                bindex := sub(bindex, 0x01)
            }{
                mstore8(add(tmpbytes, tindex), byte(bindex, bvalue))
            }
            mstore(0x40, add(tmpbytes, byteLen))
            v := mload(sub(tmpbytes, sub(0x20, byteLen)))
        }
        return (v, offset + 4);
    }

    function NextUint64(bytes memory buff, uint256 offset) internal pure returns (uint64, uint256) {
        require(offset + 8 <= buff.length && offset < offset + 8, "NextUint64, offset exceeds maximum");
        uint64 v;
        assembly {
            let tmpbytes := mload(0x40)
            let byteLen := 0x08
            for {
                let tindex := 0x00
                let bindex := sub(byteLen, 0x01)
                let bvalue := mload(add(add(buff, 0x20), offset))
            } lt(tindex, byteLen) {
                tindex := add(tindex, 0x01)
                bindex := sub(bindex, 0x01)
            }{
                mstore8(add(tmpbytes, tindex), byte(bindex, bvalue))
            }
            mstore(0x40, add(tmpbytes, byteLen))
            v := mload(sub(tmpbytes, sub(0x20, byteLen)))
        }
        return (v, offset + 8);
    }

    function NextUint255(bytes memory buff, uint256 offset) internal pure returns (uint256, uint256) {
        require(offset + 32 <= buff.length && offset < offset + 32, "NextUint255, offset exceeds maximum");
        uint256 v;
        assembly {
            let tmpbytes := mload(0x40)
            let byteLen := 0x20
            for {
                let tindex := 0x00
                let bindex := sub(byteLen, 0x01)
                let bvalue := mload(add(add(buff, 0x20), offset))
            } lt(tindex, byteLen) {
                tindex := add(tindex, 0x01)
                bindex := sub(bindex, 0x01)
            }{
                mstore8(add(tmpbytes, tindex), byte(bindex, bvalue))
            }
            mstore(0x40, add(tmpbytes, byteLen))
            v := mload(tmpbytes)
        }
        require(v <= 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff, "Value exceeds the range");
        return (v, offset + 32);
    }

    function NextVarBytes(bytes memory buff, uint256 offset) internal pure returns(bytes memory, uint256) {
        uint len;
        (len, offset) = NextVarUint(buff, offset);
        require(offset + len <= buff.length && offset <= offset + len, "NextVarBytes, offset exceeds maximum");
        bytes memory tempBytes;
        assembly{
            switch iszero(len)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(len, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, len)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(buff, lengthmod), mul(0x20, iszero(lengthmod))), offset)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, len)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return (tempBytes, offset + len);
    }

    function NextVarUint(bytes memory buff, uint256 offset) internal pure returns(uint, uint256) {
        bytes1 v;
        (v, offset) = NextByte(buff, offset);

        uint value;
        if (v == 0xFD) {
            // return NextUint16(buff, offset);
            (value, offset) = NextUint16(buff, offset);
            require(value >= 0xFD && value <= 0xFFFF, "NextUint16, value outside range");
            return (value, offset);
        } else if (v == 0xFE) {
            // return NextUint32(buff, offset);
            (value, offset) = NextUint32(buff, offset);
            require(value > 0xFFFF && value <= 0xFFFFFFFF, "NextVarUint, value outside range");
            return (value, offset);
        } else if (v == 0xFF) {
            // return NextUint64(buff, offset);
            (value, offset) = NextUint64(buff, offset);
            require(value > 0xFFFFFFFF, "NextVarUint, value outside range");
            return (value, offset);
        } else{
            // return (uint8(v), offset);
            value = uint8(v);
            require(value < 0xFD, "NextVarUint, value outside range");
            return (value, offset);
        }
    }

    function bytesToAddress(bytes memory _bs) internal pure returns (address addr) {
        require(_bs.length == 20, "bytes length does not match address");
        assembly {
            // for _bs, first word store _bs.length, second word store _bs.value
            // load 32 bytes from mem[_bs+20], convert it into Uint160, meaning we take last 20 bytes as addr (address).
            addr := mload(add(_bs, 0x14))
        }
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // fslot can contain both the length and contents of the array
                // if slength < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                // slength != 0
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "compilationTarget": {
    "contracts/Bridge.sol": "Bridge"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}