ESSENCE//

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IAdminControl.sol";

abstract contract AdminControl is Ownable, IAdminControl, ERC165 {
    using EnumerableSet for EnumerableSet.AddressSet;

    // Track registered admins
    EnumerableSet.AddressSet private _admins;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IAdminControl).interfaceId
            || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Only allows approved admins to call the specified function
     */
    modifier adminRequired() {
        require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
        _;
    }   

    /**
     * @dev See {IAdminControl-getAdmins}.
     */
    function getAdmins() external view override returns (address[] memory admins) {
        admins = new address[](_admins.length());
        for (uint i = 0; i < _admins.length(); i++) {
            admins[i] = _admins.at(i);
        }
        return admins;
    }

    /**
     * @dev See {IAdminControl-approveAdmin}.
     */
    function approveAdmin(address admin) external override onlyOwner {
        if (!_admins.contains(admin)) {
            emit AdminApproved(admin, msg.sender);
            _admins.add(admin);
        }
    }

    /**
     * @dev See {IAdminControl-revokeAdmin}.
     */
    function revokeAdmin(address admin) external override onlyOwner {
        if (_admins.contains(admin)) {
            emit AdminRevoked(admin, msg.sender);
            _admins.remove(admin);
        }
    }

    /**
     * @dev See {IAdminControl-isAdmin}.
     */
    function isAdmin(address admin) public override view returns (bool) {
        return (owner() == admin || _admins.contains(admin));
    }

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/Strings.sol";

import "./ICollectionBase.sol";

/**
 * Collection Drop Contract (Base)
 */
abstract contract CollectionBase is ICollectionBase {
    
    using ECDSA for bytes32;
    using Strings for uint256;

    // Immutable variables that should only be set by the constructor or initializer
    address internal _signingAddress;

    // Message nonces
    mapping(bytes32 => bool) private _usedNonces;

    // Sale start/end control
    bool public active;
    uint256 public startTime;
    uint256 public endTime;
    uint256 public presaleInterval;

    // Claim period start/end control
    uint256 public claimStartTime;
    uint256 public claimEndTime;

    /**
     * Withdraw funds
     */
    function _withdraw(address payable recipient, uint256 amount) internal {
        (bool success,) = recipient.call{value:amount}("");
        require(success);
    }

    /**
     * Activate the sale
     */
    function _activate(uint256 startTime_, uint256 duration, uint256 presaleInterval_, uint256 claimStartTime_, uint256 claimEndTime_) internal virtual {
        require(!active, "Already active");
        require(startTime_ > block.timestamp, "Cannot activate in the past");
        require(presaleInterval_ < duration, "Presale Interval cannot be longer than the sale");
        require(claimStartTime_ <= claimEndTime_ && claimEndTime_ <= startTime_, "Invalid claim times");
        startTime = startTime_;
        endTime = startTime + duration;
        presaleInterval = presaleInterval_;
        claimStartTime = claimStartTime_;
        claimEndTime = claimEndTime_;
        active = true;

        emit CollectionActivated(startTime, endTime, presaleInterval, claimStartTime, claimEndTime);
    }

    /**
     * Deactivate the sale
     */
    function _deactivate() internal virtual {
        startTime = 0;
        endTime = 0;
        active = false;
        claimStartTime = 0;
        claimEndTime = 0;

        emit CollectionDeactivated();
    }

    function _getNonceBytes32(string memory nonce) internal pure returns(bytes32 nonceBytes32) {
        bytes memory nonceBytes = bytes(nonce);
        require(nonceBytes.length <= 32, "Invalid nonce");
        assembly {
            nonceBytes32 := mload(add(nonce, 32))
        }
    }

    /**
     * Validate claim signature
     */
    function _validateClaimRequest(bytes32 message, bytes calldata signature, string calldata nonce, uint16 amount) internal virtual {
        _validatePurchaseRequestWithAmount(message, signature, nonce, amount);
    }

    /**
     * Validate claim restrictions
     */
    function _validateClaimRestrictions() internal virtual {
        require(active, "Inactive");
        require(block.timestamp >= claimStartTime && block.timestamp <= claimEndTime, "Outside claim period.");
    }

    /**
     * Validate purchase signature
     */
    function _validatePurchaseRequest(bytes32 message, bytes calldata signature, string calldata nonce) internal virtual { 
        // Verify nonce usage/re-use
        bytes32 nonceBytes32 = _getNonceBytes32(nonce);
        require(!_usedNonces[nonceBytes32], "Cannot replay transaction");
        // Verify valid message based on input variables
        bytes32 expectedMessage = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", (20+bytes(nonce).length).toString(), msg.sender, nonce));
        require(message == expectedMessage, "Malformed message");
        // Verify signature was performed by the expected signing address
        address signer = message.recover(signature);
        require(signer == _signingAddress, "Invalid signature");

        _usedNonces[nonceBytes32] = true;
    }

    /**
     * Validate purchase signature with amount
     */
    function _validatePurchaseRequestWithAmount(bytes32 message, bytes calldata signature, string calldata nonce, uint16 amount) internal virtual {
        // Verify nonce usage/re-use
        bytes32 nonceBytes32 = _getNonceBytes32(nonce);
        require(!_usedNonces[nonceBytes32], "Cannot replay transaction");
        // Verify valid message based on input variables
        bytes32 expectedMessage = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", (20+bytes(nonce).length+bytes(uint256(amount).toString()).length).toString(), msg.sender, nonce, uint256(amount).toString()));
        require(message == expectedMessage, "Malformed message");
        // Verify signature was performed by the expected signing address
        address signer = message.recover(signature);
        require(signer == _signingAddress, "Invalid signature");

        _usedNonces[nonceBytes32] = true;
    }

    /**
     * Perform purchase restriciton checks. Override if more logic is needed
     */
    function _validatePurchaseRestrictions() internal virtual {
        require(active, "Inactive");
        require(block.timestamp >= startTime, "Purchasing not active");
    }

    /**
     * @dev See {ICollectionBase-nonceUsed}.
     */
    function nonceUsed(string memory nonce) external view override returns(bool) {
        bytes32 nonceBytes32 = _getNonceBytes32(nonce);
        return _usedNonces[nonceBytes32];
    }

    /**
     * @dev Check if currently in presale
     */
    function _isPresale() internal view returns (bool) {
        return block.timestamp > startTime && block.timestamp - startTime < presaleInterval;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/Strings.sol";

import "./IERC1155Collection.sol";
import "./CollectionBase.sol";

/**
 * ERC1155 Collection Drop Contract (Base)
 */
abstract contract ERC1155CollectionBase is CollectionBase, IERC1155Collection {
    // Token ID to mint
    uint16 internal constant TOKEN_ID = 1;

    // Immutable variables that should only be set by the constructor or initializer
    uint16 public transactionLimit;
    
    uint16 public purchaseMax;
    uint16 public purchaseLimit;
    uint256 public purchasePrice;
    uint16 public presalePurchaseLimit;
    uint256 public presalePurchasePrice;
    uint16 public maxSupply;
    bool public useDynamicPresalePurchaseLimit;

    // Mutable mint state
    uint16 public purchaseCount;
    uint16 public reserveCount;
    mapping(address => uint16) private _mintCount;

    // Royalty
    uint256 private _royaltyBps;
    address payable private _royaltyRecipient;
    bytes4 private constant _INTERFACE_ID_ROYALTIES_CREATORCORE = 0xbb3bafd6;
    bytes4 private constant _INTERFACE_ID_ROYALTIES_EIP2981 = 0x2a55205a;
    bytes4 private constant _INTERFACE_ID_ROYALTIES_RARIBLE = 0xb7799584;

    // Transfer lock
    bool public transferLocked;

    /**
     * Initializer
     */
    function _initialize(uint16 maxSupply_, uint16 purchaseMax_, uint256 purchasePrice_, uint16 purchaseLimit_, uint16 transactionLimit_, uint256 presalePurchasePrice_, uint16 presalePurchaseLimit_, address signingAddress_, bool useDynamicPresalePurchaseLimit_) internal {
        require(_signingAddress == address(0), "Already initialized");
        require(maxSupply_ >= purchaseMax_, "Invalid input");
        maxSupply = maxSupply_;
        purchaseMax = purchaseMax_;
        purchasePrice = purchasePrice_;
        purchaseLimit = purchaseLimit_;
        transactionLimit = transactionLimit_;
        presalePurchaseLimit = presalePurchaseLimit_;
        presalePurchasePrice = presalePurchasePrice_;
        _signingAddress = signingAddress_;
        useDynamicPresalePurchaseLimit = useDynamicPresalePurchaseLimit_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165) returns (bool) {
      return interfaceId == type(IERC1155Collection).interfaceId ||interfaceId == _INTERFACE_ID_ROYALTIES_CREATORCORE
          || interfaceId == _INTERFACE_ID_ROYALTIES_EIP2981 || interfaceId == _INTERFACE_ID_ROYALTIES_RARIBLE;
    }

    /**
     * @dev See {IERC1155Collection-claim}.
     */
    function claim(uint16 amount, bytes32 message, bytes calldata signature, string calldata nonce) external virtual override {
        _validateClaimRestrictions();
        _validateClaimRequest(message, signature, nonce, amount);
        _mint(msg.sender, amount);
    }

    /**
     * @dev See {IERC1155Collection-purchase}.
     */
    function purchase(uint16 amount, bytes32 message, bytes calldata signature, string calldata nonce) external virtual override payable {
        _validatePurchaseRestrictions();

        bool isPresale = _isPresale();
        uint256 balance = _getMintBalance();

        // Check purchase amounts
        require(amount <= purchaseRemaining() && ((isPresale && useDynamicPresalePurchaseLimit) || transactionLimit == 0 || amount <= transactionLimit), "Too many requested");

        if (isPresale) {
            require(
                useDynamicPresalePurchaseLimit ||
                (
                    // check amount is under presale limit
                    (presalePurchaseLimit == 0 || (presalePurchaseLimit > balance && amount <= (presalePurchaseLimit - balance))) &&
                    // check amount is also under purchase limit
                    (purchaseLimit == 0 || (purchaseLimit > balance && amount <= (purchaseLimit - balance)))
                ),
                "Too many requested"
            );
            _validatePresalePrice(amount);
        } else {
            require(purchaseLimit == 0 || (purchaseLimit > balance && amount <= (purchaseLimit - balance)), "Too many requested");
            _validatePrice(amount);
        }

        if (isPresale && useDynamicPresalePurchaseLimit) {
            _validatePurchaseRequestWithAmount(message, signature, nonce, amount);
        } else {
            _validatePurchaseRequest(message, signature, nonce);
        }

        // Track total mints per address only if necessary
        if (_shouldUseMintCount()) {
           _mintCount[msg.sender] += amount;
        }

        _mint(msg.sender, amount);
    }

    /**
     * @dev See {IERC1155Collection-state}
     */
    function state() external override view returns (CollectionState memory) {
        // No message sender, no purchase balance
        uint16 balance = msg.sender == address(0) ? 0 : uint16(_getMintBalance());
        return CollectionState(transactionLimit, purchaseMax, purchaseRemaining(), purchasePrice, purchaseLimit, presalePurchasePrice, presalePurchaseLimit, balance, active, startTime, endTime, presaleInterval, claimStartTime, claimEndTime, useDynamicPresalePurchaseLimit);
    }

    /**
     * @dev Get balance of address. Similar to IERC1155-balanceOf, but doesn't require token ID
     * @param owner The address to get the token balance of
     */
    function balanceOf(address owner) public virtual override view returns (uint256);

    /**
     * @dev See {IERC1155Collection-purchaseRemaining}.
     */
    function purchaseRemaining() public virtual override view returns (uint16) {
        return purchaseMax - purchaseCount;
    }

    /**
     * ROYALTY FUNCTIONS
     */
    function getRoyalties(uint256) external view returns (address payable[] memory recipients, uint256[] memory bps) {
        if (_royaltyRecipient != address(0x0)) {
            recipients = new address payable[](1);
            recipients[0] = _royaltyRecipient;
            bps = new uint256[](1);
            bps[0] = _royaltyBps;
        }
        return (recipients, bps);
    }

    function getFeeRecipients(uint256) external view returns (address payable[] memory recipients) {
        if (_royaltyRecipient != address(0x0)) {
            recipients = new address payable[](1);
            recipients[0] = _royaltyRecipient;
        }
        return recipients;
    }

    function getFeeBps(uint256) external view returns (uint[] memory bps) {
        if (_royaltyRecipient != address(0x0)) {
            bps = new uint256[](1);
            bps[0] = _royaltyBps;
        }
        return bps;
    }

    function royaltyInfo(uint256, uint256 value) external view returns (address, uint256) {
        return (_royaltyRecipient, value*_royaltyBps/10000);
    }

    /**
     * Premint tokens to the owner.  Purchase must not be active.
     */
    function _premint(uint16 amount, address owner) internal virtual {
        require(!active, "Already active");
        _mint(owner, amount);
    }

    /**
     * Premint tokens to the list of addresses.  Purchase must not be active.
     */
    function _premint(uint16[] calldata amounts, address[] calldata addresses) internal virtual {
        require(!active, "Already active");
        for (uint256 i = 0; i < addresses.length; i++) {
            _mint(addresses[i], amounts[i]);
        }
    }

    /**
     * Mint reserve tokens. Purchase must be completed.
     */
    function _mintReserve(uint16 amount, address owner) internal virtual {
        require(endTime != 0 && endTime <= block.timestamp, "Cannot mint reserve until after sale complete");
        require(purchaseCount + reserveCount + amount <= maxSupply, "Too many requested");
        reserveCount += amount;
        _mintERC1155(owner, amount);
    }

    /**
     * Mint reserve tokens. Purchase must be completed.
     */
    function _mintReserve(uint16[] calldata amounts, address[] calldata addresses) internal virtual {
        require(endTime != 0 && endTime <= block.timestamp, "Cannot mint reserve until after sale complete");
        uint16 totalAmount;
        for (uint256 i = 0; i < addresses.length; i++) {
            totalAmount += amounts[i];
        }
        require(purchaseCount + reserveCount + totalAmount <= maxSupply, "Too many requested");
        reserveCount += totalAmount;
        for (uint256 i = 0; i < addresses.length; i++) {
            _mintERC1155(addresses[i], amounts[i]);
        }
    }

    /**
     * Mint function internal to ERC1155CollectionBase to keep track of state
     */
    function _mint(address to, uint16 amount) internal {
        purchaseCount += amount;
        _mintERC1155(to, amount);
    }

    /**
     * @dev A _mint function is required that calls the underlying ERC1155 mint.
     */
    function _mintERC1155(address to, uint16 amount) internal virtual;

    /**
     * Validate price (override for custom pricing mechanics)
     */
    function _validatePrice(uint16 amount) internal {
        require(msg.value == amount * purchasePrice, "Invalid purchase amount sent");
    }

    /**
     * Validate price (override for custom pricing mechanics)
     */
    function _validatePresalePrice(uint16 amount) internal virtual {
        require(msg.value == amount * presalePurchasePrice, "Invalid purchase amount sent");
    }

    /**
     * If enabled, lock token transfers until after the sale has ended.
     *
     * This helps enforce purchase limits, so someone can't buy -> transfer -> buy again
     * while the token is minting.
     */
    function _validateTokenTransferability(address from) internal view {
        require(!transferLocked || purchaseRemaining() == 0 || (active && block.timestamp >= endTime) || from == address(0), "Transfer locked until sale ends");
    }

    /**
     * Set whether or not token transfers are locked till end of sale
     */
    function _setTransferLocked(bool locked) internal {
        transferLocked = locked;
    }

    /**
     * @dev Update royalties
     */
    function _updateRoyalties(address payable recipient, uint256 bps) internal {
        _royaltyRecipient = recipient;
        _royaltyBps = bps;
    }

    /**
     * @dev Return mint count or balanceOf
     */
    function _getMintBalance() internal view returns (uint256) {
        uint256 balance;
        if (_shouldUseMintCount()) {
            balance = _mintCount[msg.sender];
        } else {
            balance = balanceOf(msg.sender);
        }

        return balance;
    }

    /**
     * @dev Return whether to use our own mint count vs balanceOf.
     *
     * Tokens minted via `premint` and `claim`, for example, don't affect mint count.
     */
    function _shouldUseMintCount() internal view returns (bool) {
        return !transferLocked && (purchaseLimit > 0 || presalePurchaseLimit > 0);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @artist: FVCKRENDER
/// @title: ESSENCE//
/// @author: manifold.xyz

//////////////////////////////////////////////////////////////////////////////////////////////
//                                                                                          //
//                   ______ _____ _____  ______ _   __ ______ ______    __  ___             //
//                  / ____// ___// ___/ / ____// | / // ____// ____/  _/_/_/_/              //
//                 / __/   \__ \ \__ \ / __/  /  |/ // /    / __/   _/_/_/_/                //
//                / /___  ___/ /___/ // /___ / /|  // /___ / /___ _/_/_/_/                  //
//               /_____/ /____//____//_____//_/ |_/ \____//_____//_/ /_/                    //
//                                                                                          //
//                                                                                          //
//                                                                ,*69.                     //
//                                                             ,**.*@@@.                    //
//                                                   %.#/.,/ /,/((/@@@@,     @@@.           //
//                                     ,(@@@@#&/,,@@/(%(& (@@%@&/##@@@..  /%@*@*,.          //
//                               #@.&@@@#@@@@@@%#@@.. @&@.*(,/,*#%&##%#,(@%/(/(@@           //
//                            &@(@@@@/@@@@*%**,.(%#%&@.@*/@&/&@@#%*/#%#%(##(@@/*.           //
//                         .&%@@@@@@@@@@@@@@@%#(////****//(#(,@.&&%%((//#%%%&*#,,           //
//                        (@%*,#@,*%&@@@@@@@@@%(//////(/**/*/,,.%%%%#*/*/(((*(**,,          //
//                      //,/*/,..#@@@@@@@@@@&%(//********/(/*,,@%%,*/*/////(69/%@.          //
//                    /#@&/#%../#@@@@@@@@@@&%(/*******,*********.%(**#*****/*(              //
//                     (%@(# .*@@@@@@@69#((//***,,,,,,,,,,,,,****,(&**%//(@.                //
//                    //#%*&/(*(%##((///***,,,,.....,,,,,,,,,,,*** @&&/*(/                  //
//                    *(*&. %/,,*/*,,........... ....... .  ..,,*.&&&&#*/(,,                //
//                     &%,  %**..,,.....             ....*(*,,.,,&&&&(,//(**                //
//                  ,*,#%/%%*,/*.......             .  ....,,.,..%(#(,.**/.                 //
//                   */&(*,#(&%/*,,,.            ...     .,*///@/#%,(.((,/                  //
//                   *@(/(/%(@@.****,.. .     ,*,        ./*/@/%&. .(,&&/                   //
//                 .,.,#%//*,#%#*,***.         *,,,    *###@%***#,./(#,                     //
//                 *@@@@(@#@*@ *%,*.*.   .,    &@/**%*#@/*,*(*/@  ,#%&                      //
//                *@@%///*@(%&/,.%.%*&. . /%,,.,&@@&/## %,#  ((@@#((                        //
//             .,@@,@@%&%#**,*//((%**/&,..*,&@.((#%//.,   @@,@(@.                           //
//             ..@@@@@@((/(#///.,,/**/(%,#(%@@@@%%&@@@&#@/./..                              //
//             ,,,,,%@@@@,,%#/*,,&***(,*/,/#%@&@@@@%@@*(%#/                                 //
//                ,***@@@@,&*/.@*,(,,,,.,.                                                  //
//                 ///@@,..,&    .,69.,                                                     //
//                                                                                          //
//                                                                                          //
//////////////////////////////////////////////////////////////////////////////////////////////


import "@manifoldxyz/libraries-solidity/contracts/access/AdminControl.sol";
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";

import "./ERC1155CollectionBase.sol";

contract ESSENCE is ERC1155, ERC1155CollectionBase, AdminControl {

    constructor(address signingAddress_) ERC1155('') {
        _initialize(
            // total supply
            12969,
            // total supply available to purchase
            12969,
            // 0.469 eth public sale price
            469000000000000000,
            // purchase limit (0 for no limit)
            0,
            // transaction limit (0 for no limit)
            1,
            // 0.2 eth presale price
            200000000000000000,
            // presale limit (unused but 0 for no limit)
            0,
            signingAddress_,
            // use dynamic presale purchase limit
            true
        );
    }

    /**
    * @dev See {IERC165-supportsInterface}.
    */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC1155, ERC1155CollectionBase, AdminControl) returns (bool) {
      return ERC1155CollectionBase.supportsInterface(interfaceId) || ERC1155.supportsInterface(interfaceId) || AdminControl.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155Collection-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        return ERC1155.balanceOf(owner, TOKEN_ID);
    }

    /**
     * @dev See {IERC1155Collection-withdraw}.
     */
    function withdraw(address payable recipient, uint256 amount) external override adminRequired {
        _withdraw(recipient, amount);
    }

    /**
     * @dev See {IERC1155Collection-setTransferLocked}.
     */
    function setTransferLocked(bool locked) external override adminRequired {
        _setTransferLocked(locked);
    }
    
    /**
     * @dev See {IERC1155Collection-premint}.
     */
    function premint(uint16 amount) external override adminRequired {
        _premint(amount, owner());
    }

    /**
     * @dev See {IERC1155Collection-premint}.
     */
    function premint(uint16[] calldata amounts, address[] calldata addresses) external override adminRequired {
        _premint(amounts, addresses);
    }

    /**
     * @dev See {IERC1155Collection-mintReserve}.
     */
    function mintReserve(uint16 amount) external override adminRequired {
        _mintReserve(amount, owner());
    }

    /**
     * @dev See {IERC1155Collection-mintReserve}.
     */
    function mintReserve(uint16[] calldata amounts, address[] calldata addresses) external override adminRequired {
        _mintReserve(amounts, addresses);
    }

    /**
     * @dev See {IERC1155Collection-activate}.
     */
    function activate(uint256 startTime_, uint256 duration, uint256 presaleInterval_, uint256 claimStartTime_, uint256 claimEndTime_) external override adminRequired {
        _activate(startTime_, duration, presaleInterval_, claimStartTime_, claimEndTime_);
    }

    /**
     * @dev See {IERC1155Collection-deactivate}.
     */
    function deactivate() external override adminRequired {
        _deactivate();
    }

    /**
     *  @dev See {IERC1155Collection-setCollectionURI}.
     */
    function setCollectionURI(string calldata uri) external override adminRequired {
        _setURI(uri);
    }

    /**
     * @dev See {IERC1155Collection-burn}
     */
    function burn(address from, uint16 amount) public virtual override {
        require(from == _msgSender() || isApprovedForAll(from, _msgSender()), "ERC1155: caller is not owner nor approved");
        ERC1155._burn(from, TOKEN_ID, amount);
    }

    /**
     * @dev See {ERC1155CollectionBase-_mint}.
     */
    function _mintERC1155(address to, uint16 amount) internal virtual override {
        ERC1155._mint(to, TOKEN_ID, amount, "");
    }

    /**
     * @dev See {ERC1155-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(address, address from, address, uint256[] memory, uint256[] memory, bytes memory) internal virtual override {
        _validateTokenTransferability(from);
    }
    
    /**
     * @dev Update royalties
     */
    function updateRoyalties(address payable recipient, uint256 bps) external adminRequired {
      _updateRoyalties(recipient, bps);
    }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Interface for admin control
 */
interface IAdminControl is IERC165 {

    event AdminApproved(address indexed account, address indexed sender);
    event AdminRevoked(address indexed account, address indexed sender);

    /**
     * @dev gets address of all admins
     */
    function getAdmins() external view returns (address[] memory);

    /**
     * @dev add an admin.  Can only be called by contract owner.
     */
    function approveAdmin(address admin) external;

    /**
     * @dev remove an admin.  Can only be called by contract owner.
     */
    function revokeAdmin(address admin) external;

    /**
     * @dev checks whether or not given address is an admin
     * Returns True if they are
     */
    function isAdmin(address admin) external view returns (bool);

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

/**
 * @dev Collection Interface
 */
interface ICollectionBase {

    event CollectionActivated(uint256 startTime, uint256 endTime, uint256 presaleInterval, uint256 claimStartTime, uint256 claimEndTime);
    event CollectionDeactivated();

    /**
     * @dev Check if nonce has been used
     */
    function nonceUsed(string memory nonce) external view returns(bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

import "./ICollectionBase.sol";

/**
 * @dev ERC1155 Collection Interface
 */
interface IERC1155Collection is ICollectionBase, IERC165 {

    struct CollectionState {
        uint16 transactionLimit;
        uint16 purchaseMax;
        uint16 purchaseRemaining;
        uint256 purchasePrice;
        uint16 purchaseLimit;
        uint256 presalePurchasePrice;
        uint16 presalePurchaseLimit;
        uint16 purchaseCount;
        bool active;
        uint256 startTime;
        uint256 endTime;
        uint256 presaleInterval;
        uint256 claimStartTime;
        uint256 claimEndTime;
        bool useDynamicPresalePurchaseLimit;
    }

    /**
     * @dev Activates the contract.
     * @param startTime_ The UNIX timestamp in seconds the sale should start at.
     * @param duration The number of seconds the sale should remain active.
     * @param presaleInterval_ The period of time the contract should only be active for presale.
     */
    function activate(uint256 startTime_, uint256 duration, uint256 presaleInterval_, uint256 claimStartTime_, uint256 claimEndTime_) external;

    /**
     * @dev Deactivate the contract
     */
    function deactivate() external;

    /**
     * @dev Pre-mint tokens to the owner. Sale must not be active.
     * @param amount The number of tokens to mint.
     */
    function premint(uint16 amount) external;

    /**
     * @dev Pre-mint tokens to the list of addresses. Sale must not be active.
     * @param amounts The amount of tokens to mint per address.
     * @param addresses The list of addresses to mint a token to.
     */
    function premint(uint16[] calldata amounts, address[] calldata addresses) external;

    /**
     * @dev Claim - mint with validation.
     * @param amount The number of tokens to mint.
     * @param message Signed message to validate input args.
     * @param signature Signature of the signer to recover from signed message.
     * @param nonce Manifold-generated nonce.
     */
    function claim(uint16 amount, bytes32 message, bytes calldata signature, string calldata nonce) external;

    /**
     * @dev Purchase - mint with validation.
     * @param amount The number of tokens to mint.
     * @param message Signed message to validate input args.
     * @param signature Signature of the signer to recover from signed message.
     * @param nonce Manifold-generated nonce.
     */
    function purchase(uint16 amount, bytes32 message, bytes calldata signature, string calldata nonce) external payable;

    /**
     * @dev Mint reserve tokens to the owner. Sale must be complete.
     * @param amount The number of tokens to mint.
     */
    function mintReserve(uint16 amount) external;

    /**
     * @dev Mint reserve tokens to the list of addresses. Sale must be complete.
     * @param amounts The amount of tokens to mint per address.
     * @param addresses The list of addresses to mint a token to.
     */
    function mintReserve(uint16[] calldata amounts, address[] calldata addresses) external;

    /**
     * @dev Set the URI for the metadata for the collection.
     * @param uri The metadata URI.
     */
    function setCollectionURI(string calldata uri) external;

    /**
     * @dev returns the collection state
     */
    function state() external view returns (CollectionState memory);

    /**
     * @dev Total amount of tokens remaining for the given token id.
     */
    function purchaseRemaining() external view returns (uint16);

    /**
     * @dev Withdraw funds (requires contract admin).
     * @param recipient The address to withdraw funds to
     * @param amount The amount to withdraw
     */
    function withdraw(address payable recipient, uint256 amount) external;

    /**
     * @dev Set whether or not token transfers are locked until end of sale.
     * @param locked Whether or not transfers are locked
     */
    function setTransferLocked(bool locked) external;

    /**
     * @dev Get balance of address. Similar to IERC1155-balanceOf, but doesn't require token ID
     * @param owner The address to get the token balance of
     */
    function balanceOf(address owner) external view returns (uint256);

    /**
     * @dev Destroys `amount` tokens from `from`
     * @param from The address to remove tokens from
     * @param amount The amount of tokens to remove
     */
    function burn(address from, uint16 amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "contracts/ESSENCE.sol": "ESSENCE"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}