The MetaTribes : Genesis

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/Strings.sol';
import '@openzeppelin/contracts/utils/introspection/ERC165.sol';

error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintedQueryForZeroAddress();
error BurnedQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerIndexOutOfBounds();
error OwnerQueryForNonexistentToken();
error TokenIndexOutOfBounds();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error URIQueryForNonexistentToken();

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
 *
 * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 *
 * Assumes that the maximum token id cannot exceed 2**128 - 1 (max value of uint128).
 */
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
    using Address for address;
    using Strings for uint256;

    // Compiler will pack this into a single 256bit word.
    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Keeps track of the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
    }

    // Compiler will pack this into a single 256bit word.
    struct AddressData {
        // Realistically, 2**64-1 is more than enough.
        uint64 balance;
        // Keeps track of mint count with minimal overhead for tokenomics.
        uint64 numberMinted;
        // Keeps track of burn count with minimal overhead for tokenomics.
        uint64 numberBurned;
    }

    // Compiler will pack the following 
    // _currentIndex and _burnCounter into a single 256bit word.
    
    // The tokenId of the next token to be minted.
    uint128 internal _currentIndex;

    // The number of tokens burned.
    uint128 internal _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
    mapping(uint256 => TokenOwnership) internal _ownerships;

    // Mapping owner address to address data
    mapping(address => AddressData) private _addressData;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than _currentIndex times
        unchecked {
            return _currentIndex - _burnCounter;    
        }
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     * This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
     * It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
     */
    function tokenByIndex(uint256 index) public view override returns (uint256) {
        uint256 numMintedSoFar = _currentIndex;
        uint256 tokenIdsIdx;

        // Counter overflow is impossible as the loop breaks when
        // uint256 i is equal to another uint256 numMintedSoFar.
        unchecked {
            for (uint256 i; i < numMintedSoFar; i++) {
                TokenOwnership memory ownership = _ownerships[i];
                if (!ownership.burned) {
                    if (tokenIdsIdx == index) {
                        return i;
                    }
                    tokenIdsIdx++;
                }
            }
        }
        revert TokenIndexOutOfBounds();
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     * This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
     * It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
        if (index >= balanceOf(owner)) revert OwnerIndexOutOfBounds();
        uint256 numMintedSoFar = _currentIndex;
        uint256 tokenIdsIdx;
        address currOwnershipAddr;

        // Counter overflow is impossible as the loop breaks when
        // uint256 i is equal to another uint256 numMintedSoFar.
        unchecked {
            for (uint256 i; i < numMintedSoFar; i++) {
                TokenOwnership memory ownership = _ownerships[i];
                if (ownership.burned) {
                    continue;
                }
                if (ownership.addr != address(0)) {
                    currOwnershipAddr = ownership.addr;
                }
                if (currOwnershipAddr == owner) {
                    if (tokenIdsIdx == index) {
                        return i;
                    }
                    tokenIdsIdx++;
                }
            }
        }

        // Execution should never reach this point.
        revert();
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            interfaceId == type(IERC721Enumerable).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return uint256(_addressData[owner].balance);
    }

    function _numberMinted(address owner) internal view returns (uint256) {
        if (owner == address(0)) revert MintedQueryForZeroAddress();
        return uint256(_addressData[owner].numberMinted);
    }

    function _numberBurned(address owner) internal view returns (uint256) {
        if (owner == address(0)) revert BurnedQueryForZeroAddress();
        return uint256(_addressData[owner].numberBurned);
    }

    /**
     * Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around in the collection over time.
     */
    function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
        uint256 curr = tokenId;

        unchecked {
            if (curr < _currentIndex) {
                TokenOwnership memory ownership = _ownerships[curr];
                if (!ownership.burned) {
                    if (ownership.addr != address(0)) {
                        return ownership;
                    }
                    // Invariant: 
                    // There will always be an ownership that has an address and is not burned 
                    // before an ownership that does not have an address and is not burned.
                    // Hence, curr will not underflow.
                    while (true) {
                        curr--;
                        ownership = _ownerships[curr];
                        if (ownership.addr != address(0)) {
                            return ownership;
                        }
                    }
                }
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view override returns (address) {
        return ownershipOf(tokenId).addr;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
        
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public override {
        address owner = ERC721A.ownerOf(tokenId);
        if (to == owner) revert ApprovalToCurrentOwner();

        if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
            revert ApprovalCallerNotOwnerNorApproved();
        }

        _approve(to, tokenId, owner);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public override {
        if (operator == _msgSender()) revert ApproveToCaller();

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        _transfer(from, to, tokenId);
        if (!_checkOnERC721Received(from, to, tokenId, _data)) {
            revert TransferToNonERC721ReceiverImplementer();
        }
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        return tokenId < _currentIndex && !_ownerships[tokenId].burned;
    }

    function _safeMint(address to, uint256 quantity) internal {
        _safeMint(to, quantity, '');
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal {
        _mint(to, quantity, _data, true);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _mint(
        address to,
        uint256 quantity,
        bytes memory _data,
        bool safe
    ) internal {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // balance or numberMinted overflow if current value of either + quantity > 3.4e38 (2**128) - 1
        // updatedIndex overflows if _currentIndex + quantity > 3.4e38 (2**128) - 1
        unchecked {
            _addressData[to].balance += uint64(quantity);
            _addressData[to].numberMinted += uint64(quantity);

            _ownerships[startTokenId].addr = to;
            _ownerships[startTokenId].startTimestamp = uint64(block.timestamp);

            uint256 updatedIndex = startTokenId;

            for (uint256 i; i < quantity; i++) {
                emit Transfer(address(0), to, updatedIndex);
                if (safe && !_checkOnERC721Received(address(0), to, updatedIndex, _data)) {
                    revert TransferToNonERC721ReceiverImplementer();
                }
                updatedIndex++;
            }

            _currentIndex = uint128(updatedIndex);
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) private {
        TokenOwnership memory prevOwnership = ownershipOf(tokenId);

        bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
            isApprovedForAll(prevOwnership.addr, _msgSender()) ||
            getApproved(tokenId) == _msgSender());

        if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
        if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, prevOwnership.addr);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**128.
        unchecked {
            _addressData[from].balance -= 1;
            _addressData[to].balance += 1;

            _ownerships[tokenId].addr = to;
            _ownerships[tokenId].startTimestamp = uint64(block.timestamp);

            // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            if (_ownerships[nextTokenId].addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId < _currentIndex) {
                    _ownerships[nextTokenId].addr = prevOwnership.addr;
                    _ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        TokenOwnership memory prevOwnership = ownershipOf(tokenId);

        _beforeTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, prevOwnership.addr);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**128.
        unchecked {
            _addressData[prevOwnership.addr].balance -= 1;
            _addressData[prevOwnership.addr].numberBurned += 1;

            // Keep track of who burned the token, and the timestamp of burning.
            _ownerships[tokenId].addr = prevOwnership.addr;
            _ownerships[tokenId].startTimestamp = uint64(block.timestamp);
            _ownerships[tokenId].burned = true;

            // If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            if (_ownerships[nextTokenId].addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId < _currentIndex) {
                    _ownerships[nextTokenId].addr = prevOwnership.addr;
                    _ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(prevOwnership.addr, address(0), tokenId);
        _afterTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked { 
            _burnCounter++;
        }
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        address owner
    ) private {
        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver(to).onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert TransferToNonERC721ReceiverImplementer();
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
     * minting.
     * And also called after one token has been burned.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Trees proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];
            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = _efficientHash(computedHash, proofElement);
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = _efficientHash(proofElement, computedHash);
            }
        }
        return computedHash;
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (finance/PaymentSplitter.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/utils/SafeERC20.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 *
 * NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
 * tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
 * to run tests before sending real value to this contract.
 */
contract PaymentSplitter is Context {
    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event ERC20PaymentReleased(IERC20 indexed token, address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    mapping(IERC20 => uint256) private _erc20TotalReleased;
    mapping(IERC20 => mapping(address => uint256)) private _erc20Released;

    /**
     * @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
     * the matching position in the `shares` array.
     *
     * All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
     * duplicates in `payees`.
     */
    constructor(address[] memory payees, uint256[] memory shares_) payable {
        require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares_[i]);
        }
    }

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive() external payable virtual {
        emit PaymentReceived(_msgSender(), msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
     * contract.
     */
    function totalReleased(IERC20 token) public view returns (uint256) {
        return _erc20TotalReleased[token];
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
     * IERC20 contract.
     */
    function released(IERC20 token, address account) public view returns (uint256) {
        return _erc20Released[token][account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 totalReceived = address(this).balance + totalReleased();
        uint256 payment = _pendingPayment(account, totalReceived, released(account));

        require(payment != 0, "PaymentSplitter: account is not due payment");

        _released[account] += payment;
        _totalReleased += payment;

        Address.sendValue(account, payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
     * percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
     * contract.
     */
    function release(IERC20 token, address account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 totalReceived = token.balanceOf(address(this)) + totalReleased(token);
        uint256 payment = _pendingPayment(account, totalReceived, released(token, account));

        require(payment != 0, "PaymentSplitter: account is not due payment");

        _erc20Released[token][account] += payment;
        _erc20TotalReleased[token] += payment;

        SafeERC20.safeTransfer(token, account, payment);
        emit ERC20PaymentReleased(token, account, payment);
    }

    /**
     * @dev internal logic for computing the pending payment of an `account` given the token historical balances and
     * already released amounts.
     */
    function _pendingPayment(
        address account,
        uint256 totalReceived,
        uint256 alreadyReleased
    ) private view returns (uint256) {
        return (totalReceived * _shares[account]) / _totalShares - alreadyReleased;
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) private {
        require(account != address(0), "PaymentSplitter: account is the zero address");
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(_shares[account] == 0, "PaymentSplitter: account already has shares");

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.12;

/// @author Ben BK https://twitter.com/BenBKTech
/// @title the MetaTribes by Anthrometa-v1

// @@@@@@@@@@@@@@@@@P?:..::!??Y5GGJ?Y&&&&&&&B#&&&&&&&&&##GPPBBP5YJY5PGP55GB&@@@@@@@
// @@@@@@@@@@@@@@@@#?....:~7?JYGPJ?!J&&&&&&&&&#&&&&&&###BBGP5??PGP555PP5555P@@@@@@@
// @@@@@@@@@@@@@@@@G:  ..^~77YG5?J!^7&&&&@@@@@&&#&&&&&&###GGPJ^^~?5GBGP5P555B@@@@@@
// @@@@@@@@@@@@@@@@5. ..:^!?PPJJ7?~~7&&&&@@@@&&&&######BBBGGP~::.:^!YPGBBGGPG@@@@@@
// @@@@@@@@@@@@@@@@5: .:^!5P5?J???!~J&&&&@@@&&&&&&&&#BBBGGGGY^::::^~?JY5GBB##@@@@@@
// @@@@@@@@@@@@@@@@#^ .^7JYJ??Y77?!~5&&&&&@@&&&&&&&&&&#BBBBGJ^::.:^^7?YPBBB##&@@@@@
// @@@@@@@@@@@@@@@@@!:~!~~?JJYYJ777!5&&&&&&&&&&&&####BBB###GJ^::::!7JYPB##&&&#&@@@@
// @@@@@@@@@@@@@@@@@?..^^^!?YPP5??7!5&&&&&&&&&&&&##BB#B##BPY?777!!?YPPG#&&&&&&&@@@@
// @@@@@@@@@@@@@@@@@P::::^~75GGGY?7~5&&&&&&&&&&&&&##G##&BGP?~^^^!?YPGB##&##&&&@@@@@
// @@@@@@@@@@@@@@@@@&B&#P7?55GBBBY!~P&&&&&&&&&&&&&&&BB&&BBBB5!~~~75GB####B#&&&@@@@@
// @@@@@@@@@@@@@@@@@@&@@@&BY5G##&G!^Y&&#&&&@@@@&&&####BGG&&&@P77?YG#&&&&&P&&&&@@@@@
// @@@@@@@@@@@@@@@@@@&@@@@&!^Y5YPGJ~Y###&@@@&#BBBBB&&#GPB&@@@@B5Y5##&&&&BG&&#&@@@@@
// @@@@@@@@@@@@@@@@@@&&@@@@&5JBBGP5!Y###B&&BBBB#&&&&&PJ5P#@@@@@B5P##&&&&5##&&@@@@@@
// @@@@@@@@@@@@@@@@@@&Y#@@@&G5B#GP7!YBBBG&B7J5P&&G&#B??#B5&@@@&GPGB#&&#GP&#&&@@@@@@
// @@@@@@@@@@@@@@@@@@@Y^5&@@#5PPG#G~JBBB#B@&&#&&&#&&#GP##&&#G55PGB####BY#&&&&&&@@@@
// @@@@@@@@@@@@@@@@@@@5~.:J#@@@#B#P:JGPG&#@@&&@&&@@@&&#BG5YJYYPPG#BB##YG&&&&&@&@@@@
// @@@@@@@@@@@@@@@@@@@Y?:..^#@@@&@?.YBYG#&@@&#&@@@&&GP5JJJJY5PPPPGGGGP5&&&&@@@@@@@@
// @@@@@@@@@@@@@@@@@@@Y75!^~B@@BGB:.5BGGG#&&&BB&@@BB5YYJYY5Y55YY55555Y##&&&@&@@@@@@
// @@@@@@@@@@@@@@@@@@B^^GG7!P&@&G~..P##PPBBYYGB&@&GBP5PPGGP555YJJJYYJ##&&&&@@#&@@@@
// @@@@@@@@@@@@@@@@@@5!55GJ~J#@@&G7.5B##BGG5P#&&@&B#B5P&BGYJ?5PJJJYJB#&&##&&@@GP&&5
// @@@@@@@@@@@@@@@@@@5Y&#BY:7G@@@&&YYG#@#B#B#&#&@&BP5P#&##BP5PGYJJ?5B#&&&&#B#@@YJPJ
// @@@@@@@@@@@@@@@@@@@@PPG^ !G@@@@&BG###&#G#&&&@@#GY77G##&#B5P5J?7JYGB###BPBPG&&?JP
// @@@@@@@@@@@@@@@@@@&GY~!  ~G@@&&G7B&BGG#P#PG&@@#Y?7!7PGGBP5J!7!7?JP###GGGGPPP&!Y#
// @@@@@&&&@@@@@@@@@B7?Y:.  ~G@@@&5J#&##&&&&BG#@@B7~~!!!7J?777!!!~!?PGP5GBGGGGGG ^B
// !~!?JYYPB#BGGBGPP?PBY:.. ~G@@@@B5B#####&&##&@@G!!!77!!!!!7!!!^^~?55Y#&&BBGB&B:.J
// !?7~^~~~:.  :~7B@&&#Y~::.~G@@@&&&&###BGB&&&&@&P!!!7777?7!!~~^^^7J?7P&@&&#B#@@#~.
// YYY5Y7^!P5^~YG#&B5YBB!~::!B@@&&@@&&#B##&##&@@&P~^~!!!77?7~~~!7??YP?^^?G&&#B&@@@#
// 555PPGP~:?YY5PY^.~B&@P7?^?B@@&&&@@&&#&&@#&@@@&P?7!77777?7!7?77YP&&&&GJ~~75BB#@@@
// BBGGG#&&BB#PY7:^?#@@@@Y?~?GG&&&@@@@&&&&@@@@@@&Y~!!~~~!7JYY?J5G#&@@@@@&&&#B##BB#&
// B&&&&&&&&@@P~:7#&@@@@@&7~?Y~#@@@@&@@&&&@@@@@@&?^^^~~!???JP#&#GG&@@@@@@@@@@@@&&##
// &&&&@&&&@@#GYG&&@@@@@#BG7YJ^#@@@@@@@@@@@@@@@@B7^~7JJ!7YB&@@&5~G@@@@@@&&&@@@@@&#B
// &&@@&&@@#?~P#&@@@@@@@&&&PP?^#@@@@@@@@@@@@@@@@P77!!7JP&@@@@@&J7&@@@@@@@&&#&@@@&~.
// &&&&&@#Y^5BY&@@@@@@&&@@@&BJJ&@@@@@@@@@@@@@@@@5?7?5#@@@@@@@@&P5@@@@@@@@@@@&&@@@J:
// &&&&&575P&@&&&@@@@&&#B#&@@&&@&@@@@@@@@@@@@@@&GB&@@@@@@@@@@@&5#@@@@@@@@@@@@@@@@@#
// &@@B!~P&@@@@@@@@@&G5#P7?P#@@@&@@@@@@@@@@@@@@@@@@@@@@@@&&&@@@#@@@@@@@@@@@@@@@@@@?
// #BG!^7PGG#&@@@@&&P?G#5~: :#@&#&@@@@@@@@@@@@@@@@@@@@@@@##@@@@@@@@@@@@@@@@&&&&@&&&
//  .  .:^~!7Y&@@@@&GBBJ^~^:~#B#&&@@@@@@@@@@@@@@@@@@@@@&#B&@@@@@@@@@@&&&@&&&&&@&&&&
//  ...^!7JPBBGB@@@@@@@BJ7::7&&@@@@@@@@@@@@@@@@@@@@@@@@B7P&&&&&&&&&&&&&&&@@@@@@@@@&
// .^!~GPYYPB#&#B&@@@@@@@G^^B@@@@@@@@&&@@@@@@@&@@@@@@@@&&&&&&#&&&@@@@@@@@@@@&&#BBB#
// :!7~!PBGGBB##&##&@@@@@@#G@@@@@@@@&&@@@@@@@@&@@@@@@@@@&&&&##&&@@@@@@@@@&#GY~:....
// ^7JJ7!7PB##B##&&&###&&@@@@@@&#B&&&@@@@@@@@@&&@@@@@@@@&#GB#&@@@@@@@@@&&&&&&&BPJ!^
// ~?JJY5YJY5PB##&&&&&&##BGGBG5775B&@@@@@@@@@&&@@@&@@@@@@&@@@@@@@@@@&&&&&&&&&&&&&&#
// :!YB##BP5YJ55B#&&#&&&&&&&#G5YJJ5B&@@@@&&#&&@@@@&@@@@@@&&&&@@&&&&&&&&&&&&&&&&&#&&
// .!B&&BJ?7^~J5PGB##&&&##&&&&&&&&&&#&@@&###BB###&&&&&&&&&#&&&&&&&&&&&&&&&&&&&&&&&&
// !B&#P?!~^:755GGGGB&&&&&&&&&&&&&&&&@@@&&&&&&&&&&&&#####&##&&&&&&&&&&&&&&&&&&&&&&&
// ##PY7~^~?5GPPGGGB#&&&&&&&&&&&&&&&@@@@@&&&&&&&&&&&&&&&&&&&&&@&&&&&&&&&&&&&&&&&&&&
// P?77~:^7Y5GGBBGG##&&BB&&&&&&&&&&&@@@&@&&&&&&&&&&&&&&&&&&&&&&&&&&B#&&&&&&&&&&&&#G

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import "@openzeppelin/contracts/finance/PaymentSplitter.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "./ERC721A.sol";

contract TheMetaTribesERC721A is Ownable, ERC721A, PaymentSplitter {
    //To concatenate the URL of an NFT
    using Strings for uint;

    //The different steps of the sale by Anthrometa-v1
    enum Step {
        Before,
        Presale,
        WhitelistSale,
        PublicSale,
        SoldOut,
        Reveal
    }

    Step public sellingStep;

    //The total number of NFTs
    uint private constant MAX_SUPPLY = 8888;
    //The amount for gift 
    uint private constant MAX_GIFT = 100;
    //The amount for the presale (dutch auction)
    uint private constant MAX_PRESALE = 6788;
    //The amount for the whitelist sale
    uint private constant MAX_WHITELIST = 2000;
    //The amount for the presale AND for the whitelist 
    uint private constant MAX_PRESALE_AND_WHITELIST = MAX_PRESALE + MAX_WHITELIST;
    //The total number of NFTs minus gift 
    uint private constant MAX_SUPPLY_MINUS_GIFT = MAX_SUPPLY - MAX_GIFT;

    //The price for the whitelist sale & public sale
    uint public wlSalePrice;
    uint public publicSalePrice;

    //When the presale (dutch auction) starts
    uint public saleStartTime = 1646413200;

    //The Merkle Root
    bytes32 public merkleRoot;

    //base URI of the NFTs
    string public baseURI;

    //Number of NFTs/Wallet Whitelist 
    mapping(address => uint) public amountNFTsperWalletWhitelistSale;
    
    //Amount of NFTs per Wallet for presale and whitelist sale Mint
    uint private constant maxPerAddressDuringPresaleMint = 5;
    uint private constant maxPerAddressDuringWhitelistMint = 1;

    //Managing the price by Anthrometa-v1
    uint private constant DUTCH_AUCTION_PRICE_START = 1 ether;
    uint private constant DUTCH_AUCTION_PRICE_END = 0.15 ether;
    uint private constant DUTCH_AUCTION_DURATION = 340 minutes;
    uint private constant DUTCH_AUCTION_DROP_INTERVAL = 20 minutes;
    uint private constant DUTCH_AUCTION_DROP_PER_STEP = (DUTCH_AUCTION_PRICE_START - DUTCH_AUCTION_PRICE_END) /
    (DUTCH_AUCTION_DURATION / DUTCH_AUCTION_DROP_INTERVAL);

    //Is the contract paused ?
    bool public isPaused;

    //Number of addresses in the paymentSplitter
    uint private teamLength;

    //How Anthrometa-v1 is creating the MetaTribes to save the planet
    constructor(
        address[] memory _team, 
        uint[] memory _teamShares, 
        bytes32 _merkleRoot, 
        string memory _baseURI) 
    ERC721A("The MetaTribes", "TMT") 
    PaymentSplitter(_team, _teamShares) {
        merkleRoot = _merkleRoot;
        baseURI = _baseURI;
        teamLength = _team.length;
    }
    

    /**
    * @notice Get the price of 1 NFT during the Presale (dutch auction)
    *
    * @return the price of 1 NFT in Wei during the Presale (dutch auction)
    **/
    function getPresalePrice() public view returns(uint) {
        if (currentTime() < saleStartTime) {
            return DUTCH_AUCTION_PRICE_START;
        }

        if (currentTime() - saleStartTime >= DUTCH_AUCTION_DURATION) {
            return DUTCH_AUCTION_PRICE_END;
        } else {
            uint256 intervalCount = (currentTime() - saleStartTime) /DUTCH_AUCTION_DROP_INTERVAL;
            return DUTCH_AUCTION_PRICE_START - (intervalCount * DUTCH_AUCTION_DROP_PER_STEP);
        }
    }

    /**
    * @notice Anthrometa-v1 does not want his contract to be called by other AIs
    **/
    modifier callerIsUser() {
        require(tx.origin == msg.sender, "The caller is another contract");
        _;
    }

    /**
    * @notice Mint function for the Presale
    *
    * @param _account Account which will receive the NFT
    * @param _quantity Amount of NFTs the user wants to mint
    **/
    function presaleMint(address _account, uint _quantity) external payable callerIsUser {
        require(!isPaused, "Contract is paused");
        uint price = getPresalePrice();
        require(currentTime() >= saleStartTime, "Presale has not started yet");
        require(currentTime() < saleStartTime + DUTCH_AUCTION_DURATION, "Presale Mint is finished");
        require(sellingStep == Step.Presale, "Presale has not started yet");
        require(
        totalSupply() + _quantity <= MAX_PRESALE, "Not enough remaining reserved for presale to support desired mint amount");
        require(_numberMinted(msg.sender) + _quantity <= maxPerAddressDuringPresaleMint, "You can't mint so much");
        require(msg.value >= price * _quantity, "Not enought funds");
        _safeMint(_account, _quantity);
    }

    /**
    * @notice Mint function for the Whitelist Sale
    *
    * @param _account Account which will receive the NFT
    * @param _quantity Amount of NFTs the user wants to mint
    * @param _proof The Merkle Proof
    **/
    function whitelistMint(address _account, uint _quantity, bytes32[] calldata _proof) external payable callerIsUser {
        require(!isPaused, "Contract is paused");
        uint price = wlSalePrice;
        require(price != 0, "Price is 0");
        require(sellingStep == Step.WhitelistSale, "Whitelist sale is not activated");
        require(isWhiteListed(msg.sender, _proof), "Not whitelisted");
        require(amountNFTsperWalletWhitelistSale[msg.sender] + _quantity <= maxPerAddressDuringWhitelistMint, 
        "You can only get 1 NFT on the Whitelist Sale");
        require(totalSupply() + _quantity <= MAX_PRESALE_AND_WHITELIST, "Max supply exceeded");
        require(msg.value >= price * _quantity, "Not enought funds");
        amountNFTsperWalletWhitelistSale[msg.sender] += _quantity;
        _safeMint(_account, _quantity);
    }

    /**
    * @notice Mint function for the Public Sale
    *
    * @param _account Account which will receive the NFT
    * @param _quantity Amount of NFTs the user wants to mint
    **/
    function publicSaleMint(address _account, uint _quantity) external payable callerIsUser {
        require(!isPaused, "Contract is paused");
        uint price = publicSalePrice;
        require(price != 0, "Price is 0");
        require(sellingStep == Step.PublicSale, "Public sale is not activated");
        require(totalSupply() + _quantity <= MAX_SUPPLY_MINUS_GIFT, "Max supply exceeded");
        require(msg.value >= price * _quantity, "Not enought funds");
        _safeMint(_account, _quantity);
    }

    /**
    * @notice Allows the owner to gift NFTs
    *
    * @param _to The address of the receiver
    * @param _quantity Amount of NFTs the owner wants to gift
    **/
    function gift(address _to, uint _quantity) external onlyOwner {
        require(sellingStep > Step.PublicSale, "Gift is after the public sale");
        require(totalSupply() + _quantity <= MAX_SUPPLY, "Reached max supply");
        _safeMint(_to, _quantity);
    }

    /**
    * @notice Allows to set the whitelist sale price
    */
    function setWlSalePrice(uint _wlSalePrice) external onlyOwner {
        wlSalePrice = _wlSalePrice;
    }

    /**
    * @notice Allows to set the public sale price
    */
    function setPublicSalePrice(uint _publicSalePrice) external onlyOwner {
        publicSalePrice = _publicSalePrice;
    }
    
    /**
    * @notice Change the starting time (timestamp) of the Presale (dutch auction)
    *
    * @param _saleStartTime The starting timestamp of the Presale (dutch auction)
    **/
    function setSaleStartTime(uint _saleStartTime) external onlyOwner {
        saleStartTime = _saleStartTime;
    }

    /**
    * @notice Get the current timestamp
    *
    * @return the current timestamp
    **/
    function currentTime() internal view returns(uint) {
        return block.timestamp;
    }

    /**
    * @notice Get the token URI of an NFT by his ID
    *
    * @param _tokenId The ID of the NFT you want to have the URI
    **/
    function tokenURI(uint _tokenId) public view virtual override returns (string memory) {
        require(_exists(_tokenId), "URI query for nonexistent token");

        return string(abi.encodePacked(baseURI, _tokenId.toString(), ".json"));
    }

    /**
    * @notice Change the step of the sale
    *
    * @param _step The new step of the sale
    **/
    function setStep(uint _step) external onlyOwner {
        sellingStep = Step(_step);
    }

    /**
    * @notice Pause or unpause the smart contract
    *
    * @param _isPaused true or false if we want to pause or unpause the contract
    **/
    function setPaused(bool _isPaused) external onlyOwner {
        isPaused = _isPaused;
    }

    /**
    * @notice Change the base URI of the NFTs
    *
    * @param _baseURI The new base URI of the NFTs
    **/
    function setBaseUri(string memory _baseURI) external onlyOwner {
        baseURI = _baseURI;
    }
 
    /**
    * @notice Change the Merkle Root
    *
    * @param _merkleRoot The new Merkle Root
    **/
    function setMerkleRoot(bytes32 _merkleRoot) external onlyOwner {
        merkleRoot = _merkleRoot;
    }

    /**
    * @notice Check if an address is whitelisted
    *
    * @param _account The address checked
    * @param _proof The Merkle proof
    * 
    * @return bool return true if the address is whitelisted, false otherwise
    **/
    function isWhiteListed(address _account, bytes32[] calldata _proof) internal view returns(bool) {
        return _verify(leaf(_account), _proof);
    }

    /**
    * @notice Hash an address
    *
    * @param _account The address to be hashed
    * 
    * @return bytes32 The hashed address
    **/
    function leaf(address _account) internal pure returns(bytes32) {
        return keccak256(abi.encodePacked(_account));
    }

    /** 
    * @notice Returns true if a leaf can be proved to be a part of a Merkle tree defined by root
    *
    * @param _leaf The leaf
    * @param _proof The Merkle Proof
    *
    * @return True if a leaf can be provded to be a part of a Merkle tree defined by root
    **/
    function _verify(bytes32 _leaf, bytes32[] memory _proof) internal view returns(bool) {
        return MerkleProof.verify(_proof, merkleRoot, _leaf);
    }

    /** 
    * @notice Release the gains on every accounts
    **/
    function releaseAll() external {
        for(uint i = 0 ; i < teamLength ; i++) {
            release(payable(payee(i)));
        }
    }

    /**
    * Not allowing receiving ether outside minting functions
    */
    receive() override external payable {
        revert('Only if you mint');
    }
}

{
  "compilationTarget": {
    "contracts/TheMetaTribesERC721A.sol": "TheMetaTribesERC721A"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}