Binance Wrapped Bitcoin

// File: contracts/ethereum/BinancePeggyToken.sol

/**
 *Submitted for verification at Etherscan.io on 2018-11-24
*/

pragma solidity 0.4.24;

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * See https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
    function totalSupply() public view returns (uint256);
    function balanceOf(address _who) public view returns (uint256);
    function transfer(address _to, uint256 _value) public returns (bool);
    event Transfer(address indexed from, address indexed to, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {

    /**
    * @dev Multiplies two numbers, throws on overflow.
    */
    function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
        // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (_a == 0) {
            return 0;
        }

        c = _a * _b;
        assert(c / _a == _b);
        return c;
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
        // assert(_b > 0); // Solidity automatically throws when dividing by 0
        // uint256 c = _a / _b;
        // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
        return _a / _b;
    }

    /**
    * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
        assert(_b <= _a);
        return _a - _b;
    }

    /**
    * @dev Adds two numbers, throws on overflow.
    */
    function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
        c = _a + _b;
        assert(c >= _a);
        return c;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
    using SafeMath for uint256;

    mapping(address => uint256) internal balances;

    uint256 internal totalSupply_;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return totalSupply_;
    }

    /**
    * @dev Transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint256 _value) public returns (bool) {
        require(_value <= balances[msg.sender]);
        require(_to != address(0));

        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(_value);
        emit Transfer(msg.sender, _to, _value);
        return true;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public view returns (uint256) {
        return balances[_owner];
    }

}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
    function allowance(address _owner, address _spender)
    public view returns (uint256);

    function transferFrom(address _from, address _to, uint256 _value)
    public returns (bool);

    function approve(address _spender, uint256 _value) public returns (bool);
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/issues/20
 * Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

    mapping (address => mapping (address => uint256)) internal allowed;


    /**
     * @dev Transfer tokens from one address to another
     * @param _from address The address which you want to send tokens from
     * @param _to address The address which you want to transfer to
     * @param _value uint256 the amount of tokens to be transferred
     */
    function transferFrom(
        address _from,
        address _to,
        uint256 _value
    )
    public
    returns (bool)
    {
        require(_value <= balances[_from]);
        require(_value <= allowed[_from][msg.sender]);
        require(_to != address(0));

        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(_value);
        allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
        emit Transfer(_from, _to, _value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param _spender The address which will spend the funds.
     * @param _value The amount of tokens to be spent.
     */
    function approve(address _spender, uint256 _value) public returns (bool) {
        allowed[msg.sender][_spender] = _value;
        emit Approval(msg.sender, _spender, _value);
        return true;
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param _owner address The address which owns the funds.
     * @param _spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(
        address _owner,
        address _spender
    )
    public
    view
    returns (uint256)
    {
        return allowed[_owner][_spender];
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * @param _spender The address which will spend the funds.
     * @param _addedValue The amount of tokens to increase the allowance by.
     */
    function increaseApproval(
        address _spender,
        uint256 _addedValue
    )
    public
    returns (bool)
    {
        allowed[msg.sender][_spender] = (
        allowed[msg.sender][_spender].add(_addedValue));
        emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * @param _spender The address which will spend the funds.
     * @param _subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseApproval(
        address _spender,
        uint256 _subtractedValue
    )
    public
    returns (bool)
    {
        uint256 oldValue = allowed[msg.sender][_spender];
        if (_subtractedValue >= oldValue) {
            allowed[msg.sender][_spender] = 0;
        } else {
            allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
        }
        emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
        return true;
    }

}

// File: openzeppelin-solidity/contracts/token/ERC20/DetailedERC20.sol

/**
 * @title DetailedERC20 token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract DetailedERC20 is ERC20 {
    string public name;
    string public symbol;
    uint8 public decimals;

    constructor() public {
    }

    function initializeDetailedERC20(string memory _name, string memory _symbol, uint8 _decimals) internal {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
    }
}

// File: openzeppelin-solidity/contracts/ownership/Ownable.sol

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address public owner;


    event OwnershipRenounced(address indexed previousOwner);
    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );


    /**
     * @dev The Ownable constructor sets the original `owner` of the contract to the sender
     * account.
     */
    constructor() public {
    }

    function initializeOwnable(address _owner) internal {
        owner = _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }

    /**
     * @dev Allows the current owner to relinquish control of the contract.
     * @notice Renouncing to ownership will leave the contract without an owner.
     * It will not be possible to call the functions with the `onlyOwner`
     * modifier anymore.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipRenounced(owner);
        owner = address(0);
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param _newOwner The address to transfer ownership to.
     */
    function transferOwnership(address _newOwner) public onlyOwner {
        _transferOwnership(_newOwner);
    }

    /**
     * @dev Transfers control of the contract to a newOwner.
     * @param _newOwner The address to transfer ownership to.
     */
    function _transferOwnership(address _newOwner) internal {
        require(_newOwner != address(0));
        emit OwnershipTransferred(owner, _newOwner);
        owner = _newOwner;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/MintableToken.sol

/**
 * @title Mintable token
 * @dev Simple ERC20 Token example, with mintable token creation
 * Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
 */
contract MintableToken is StandardToken, Ownable {
    event Mint(address indexed to, uint256 amount);
    event MintFinished();

    bool public mintingFinished = false;


    modifier canMint() {
        require(!mintingFinished);
        _;
    }

    modifier hasMintPermission() {
        require(msg.sender == owner);
        _;
    }

    /**
     * @dev Function to mint tokens
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(
        address _to,
        uint256 _amount
    )
    public
    hasMintPermission
    canMint
    returns (bool)
    {
        totalSupply_ = totalSupply_.add(_amount);
        balances[_to] = balances[_to].add(_amount);
        emit Mint(_to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }

    /**
     * @dev Function to stop minting new tokens.
     * @return True if the operation was successful.
     */
    function finishMinting() public onlyOwner canMint returns (bool) {
        mintingFinished = true;
        emit MintFinished();
        return true;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BurnableToken.sol

/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract BurnableToken is BasicToken {

    event Burn(address indexed burner, uint256 value);

    /**
     * @dev Burns a specific amount of tokens.
     * @param _value The amount of token to be burned.
     */
    function burn(uint256 _value) public {
        _burn(msg.sender, _value);
    }

    function _burn(address _who, uint256 _value) internal {
        require(_value <= balances[_who]);
        // no need to require value <= totalSupply, since that would imply the
        // sender's balance is greater than the totalSupply, which *should* be an assertion failure

        balances[_who] = balances[_who].sub(_value);
        totalSupply_ = totalSupply_.sub(_value);
        emit Burn(_who, _value);
        emit Transfer(_who, address(0), _value);
    }
}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();

    bool public paused = false;


    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused);
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(paused);
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyOwner whenNotPaused {
        paused = true;
        emit Pause();
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyOwner whenPaused {
        paused = false;
        emit Unpause();
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/PausableToken.sol

/**
 * @title Pausable token
 * @dev StandardToken modified with pausable transfers.
 **/
contract PausableToken is StandardToken, Pausable {

    function transfer(
        address _to,
        uint256 _value
    )
    public
    whenNotPaused
    returns (bool)
    {
        return super.transfer(_to, _value);
    }

    function transferFrom(
        address _from,
        address _to,
        uint256 _value
    )
    public
    whenNotPaused
    returns (bool)
    {
        return super.transferFrom(_from, _to, _value);
    }

    function approve(
        address _spender,
        uint256 _value
    )
    public
    whenNotPaused
    returns (bool)
    {
        return super.approve(_spender, _value);
    }

    function increaseApproval(
        address _spender,
        uint _addedValue
    )
    public
    whenNotPaused
    returns (bool success)
    {
        return super.increaseApproval(_spender, _addedValue);
    }

    function decreaseApproval(
        address _spender,
        uint _subtractedValue
    )
    public
    whenNotPaused
    returns (bool success)
    {
        return super.decreaseApproval(_spender, _subtractedValue);
    }
}

// File: openzeppelin-solidity/contracts/ownership/Claimable.sol

/**
 * @title Claimable
 * @dev Extension for the Ownable contract, where the ownership needs to be claimed.
 * This allows the new owner to accept the transfer.
 */
contract Claimable is Ownable {
    address public pendingOwner;

    /**
     * @dev Modifier throws if called by any account other than the pendingOwner.
     */
    modifier onlyPendingOwner() {
        require(msg.sender == pendingOwner);
        _;
    }

    /**
     * @dev Allows the current owner to set the pendingOwner address.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        pendingOwner = newOwner;
    }

    /**
     * @dev Allows the pendingOwner address to finalize the transfer.
     */
    function claimOwnership() public onlyPendingOwner {
        emit OwnershipTransferred(owner, pendingOwner);
        owner = pendingOwner;
        pendingOwner = address(0);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    function safeTransfer(
        ERC20Basic _token,
        address _to,
        uint256 _value
    )
    internal
    {
        require(_token.transfer(_to, _value));
    }

    function safeTransferFrom(
        ERC20 _token,
        address _from,
        address _to,
        uint256 _value
    )
    internal
    {
        require(_token.transferFrom(_from, _to, _value));
    }

    function safeApprove(
        ERC20 _token,
        address _spender,
        uint256 _value
    )
    internal
    {
        require(_token.approve(_spender, _value));
    }
}

// File: openzeppelin-solidity/contracts/ownership/CanReclaimToken.sol

/**
 * @title Contracts that should be able to recover tokens
 * @author SylTi
 * @dev This allow a contract to recover any ERC20 token received in a contract by transferring the balance to the contract owner.
 * This will prevent any accidental loss of tokens.
 */
contract CanReclaimToken is Ownable {
    using SafeERC20 for ERC20Basic;

    /**
     * @dev Reclaim all ERC20Basic compatible tokens
     * @param _token ERC20Basic The address of the token contract
     */
    function reclaimToken(ERC20Basic _token) external onlyOwner {
        uint256 balance = _token.balanceOf(this);
        _token.safeTransfer(owner, balance);
    }

}

// File: contracts/utils/OwnableContract.sol

// empty block is used as this contract just inherits others.
contract OwnableContract is CanReclaimToken, Claimable { } /* solhint-disable-line no-empty-blocks */

contract BinancePeggyToken is StandardToken, DetailedERC20,
MintableToken, BurnableToken, PausableToken, OwnableContract {

    // INITIALIZATION DATA
    bool public initialized = false;
    /**
     * @dev sets 0 initials tokens, the owner, and the supplyController.
     * this serves as the constructor for the proxy but compiles to the
     * memory model of the Implementation contract.
     */
    function initialize(string name, string symbol, uint8 decimals, address owner) public {
        require(!initialized, "already initialized");
        initializeDetailedERC20(name, symbol, decimals);
        initializeOwnable(owner);
        initialized = true;
    }

    function burn(uint value) public onlyOwner {
        super.burn(value);
    }

    function finishMinting() public onlyOwner returns (bool) {
        return false;
    }

    function renounceOwnership() public onlyOwner {
        revert("renouncing ownership is blocked");
    }
}

{
  "compilationTarget": {
    "BinancePeggyToken.sol": "BinancePeggyToken"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}