// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IBridge, MessengerProtocol} from "./interfaces/IBridge.sol";
import {Router} from "./Router.sol";
import {Messenger} from "./Messenger.sol";
import {MessengerGateway} from "./MessengerGateway.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
import {GasUsage} from "./GasUsage.sol";
import {WormholeMessenger} from "./WormholeMessenger.sol";
import {HashUtils} from "./libraries/HashUtils.sol";
/**
* @title Bridge
* @dev A contract with functions to facilitate bridging tokens across different blockchains.
*/
contract Bridge is GasUsage, Router, MessengerGateway, IBridge {
using SafeERC20 for IERC20;
using HashUtils for bytes32;
uint public immutable override chainId;
mapping(bytes32 messageHash => uint isProcessed) public override processedMessages;
mapping(bytes32 messageHash => uint isSent) public override sentMessages;
// Info about bridges on other chains
mapping(uint chainId => bytes32 bridgeAddress) public override otherBridges;
// Info about tokens on other chains
mapping(uint chainId => mapping(bytes32 tokenAddress => bool isSupported)) public override otherBridgeTokens;
/**
* @dev Emitted when tokens are sent on the source blockchain.
*/
event TokensSent(
uint amount,
bytes32 recipient,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger
);
/**
* @dev Emitted when the tokens are received on the destination blockchain.
*/
event TokensReceived(uint amount, bytes32 recipient, uint nonce, MessengerProtocol messenger, bytes32 message);
/**
* @dev Emitted when this contract receives the bridging fee.
*/
event ReceiveFee(uint bridgeTransactionCost, uint messageTransactionCost);
/**
* @dev Emitted when this contract charged the sender with the tokens for the bridging fee.
*/
event BridgingFeeFromTokens(uint gas);
/**
* @dev Emitted when the contract receives native tokens (e.g. Ether on the Ethereum network) from the admin to
* supply the gas for bridging.
*/
event Received(address sender, uint amount);
constructor(
uint chainId_,
uint chainPrecision_,
Messenger allbridgeMessenger_,
WormholeMessenger wormholeMessenger_,
IGasOracle gasOracle_
) Router(chainPrecision_) MessengerGateway(allbridgeMessenger_, wormholeMessenger_) GasUsage(gasOracle_) {
chainId = chainId_;
}
/**
* @notice Initiates a swap and bridge process of a given token for a token on another blockchain.
* @dev This function is used to initiate a cross-chain transfer. The specified amount of token is first transferred
* to the pool on the current chain, and then an event `TokensSent` is emitted to signal that tokens have been sent
* on the source chain. See the function `receiveTokens`.
* The bridging fee required for the cross-chain transfer can be paid in two ways:
* - by sending the required amount of native gas token along with the transaction
* (See `getTransactionCost` in the `GasUsage` contract and `getMessageCost` in the `MessengerGateway` contract).
* - by setting the parameter `feeTokenAmount` with the bridging fee amount in the source tokens
* (See the function `getBridgingCostInTokens`).
* @param token The token to be swapped.
* @param amount The amount of tokens to be swapped (including `feeTokenAmount`).
* @param destinationChainId The ID of the destination chain.
* @param receiveToken The token to receive in exchange for the swapped token.
* @param nonce An identifier that is used to ensure that each transfer is unique and can only be processed once.
* @param messenger The chosen way of delivering the message across chains.
* @param feeTokenAmount The amount of tokens to be deducted from the transferred amount as a bridging fee.
*
*/
function swapAndBridge(
bytes32 token,
uint amount,
bytes32 recipient,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger,
uint feeTokenAmount
) external payable override whenCanSwap {
require(amount > feeTokenAmount, "Bridge: amount too low for fee");
require(recipient != 0, "Bridge: bridge to the zero address");
uint bridgingFee = msg.value + _convertBridgingFeeInTokensToNativeToken(msg.sender, token, feeTokenAmount);
uint amountAfterFee = amount - feeTokenAmount;
uint vUsdAmount = _sendAndSwapToVUsd(token, msg.sender, amountAfterFee);
_sendTokens(vUsdAmount, recipient, destinationChainId, receiveToken, nonce, messenger, bridgingFee);
}
/**
* @notice Completes the bridging process by sending the tokens on the destination chain to the recipient.
* @dev This function is called only after a bridging has been initiated by a user
* through the `swapAndBridge` function on the source chain.
* @param amount The amount of tokens being bridged.
* @param recipient The recipient address for the bridged tokens.
* @param sourceChainId The ID of the source chain.
* @param receiveToken The address of the token being received.
* @param nonce A unique nonce for the bridging transaction.
* @param messenger The protocol used to relay the message.
* @param receiveAmountMin The minimum amount of receiveToken required to be received.
*/
function receiveTokens(
uint amount,
bytes32 recipient,
uint sourceChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger,
uint receiveAmountMin
) external payable override whenCanSwap {
require(otherBridges[sourceChainId] != bytes32(0), "Bridge: source not registered");
bytes32 messageWithSender = this
.hashMessage(amount, recipient, sourceChainId, chainId, receiveToken, nonce, messenger)
.hashWithSender(otherBridges[sourceChainId]);
require(processedMessages[messageWithSender] == 0, "Bridge: message processed");
// mark the transfer as received on the destination chain
processedMessages[messageWithSender] = 1;
// check if tokens has been sent on the source chain
require(this.hasReceivedMessage(messageWithSender, messenger), "Bridge: no message");
uint receiveAmount = _receiveAndSwapFromVUsd(
receiveToken,
address(uint160(uint(recipient))),
amount,
receiveAmountMin
);
// pass extra gas to the recipient
if (msg.value > 0) {
// ignore if passing extra gas failed
// solc-ignore-next-line unused-call-retval
payable(address(uint160(uint(recipient)))).call{value: msg.value}("");
}
emit TokensReceived(receiveAmount, recipient, nonce, messenger, messageWithSender);
}
/**
* @notice Allows the admin to add new supported chain destination.
* @dev Registers the address of a bridge deployed on a different chain.
* @param chainId_ The chain ID of the bridge to register.
* @param bridgeAddress The address of the bridge contract to register.
*/
function registerBridge(uint chainId_, bytes32 bridgeAddress) external override onlyOwner {
otherBridges[chainId_] = bridgeAddress;
}
/**
* @notice Allows the admin to add a new supported destination token.
* @dev Adds the address of a token on another chain to the list of supported tokens for the specified chain.
* @param chainId_ The chain ID where the token is deployed.
* @param tokenAddress The address of the token to add as a supported token.
*/
function addBridgeToken(uint chainId_, bytes32 tokenAddress) external override onlyOwner {
otherBridgeTokens[chainId_][tokenAddress] = true;
}
/**
* @notice Allows the admin to remove support for a destination token.
* @dev Removes the address of a token on another chain from the list of supported tokens for the specified chain.
* @param chainId_ The chain ID where the token is deployed.
* @param tokenAddress The address of the token to remove from the list of supported tokens.
*/
function removeBridgeToken(uint chainId_, bytes32 tokenAddress) external override onlyOwner {
otherBridgeTokens[chainId_][tokenAddress] = false;
}
/**
* @notice Allows the admin to withdraw the bridging fee collected in native tokens.
*/
function withdrawGasTokens(uint amount) external override onlyOwner {
payable(msg.sender).transfer(amount);
}
/**
* @notice Allows the admin to withdraw the bridging fee collected in tokens.
* @param token The address of the token contract.
*/
function withdrawBridgingFeeInTokens(IERC20 token) external onlyOwner {
uint toWithdraw = token.balanceOf(address(this));
if (toWithdraw > 0) {
token.safeTransfer(msg.sender, toWithdraw);
}
}
/**
* @dev Calculates the amount of bridging fee nominated in a given token, which includes:
* - the gas cost of making the receive transaction on the destination chain,
* - the gas cost of sending the message to the destination chain using the specified messenger protocol.
* @param destinationChainId The ID of the destination chain.
* @param messenger The chosen way of delivering the message across chains.
* @param tokenAddress The address of the token contract on the source chain.
* @return The total price of bridging, with the precision according to the token's `decimals()` value.
*/
function getBridgingCostInTokens(
uint destinationChainId,
MessengerProtocol messenger,
address tokenAddress
) external view override returns (uint) {
return
gasOracle.getTransactionGasCostInUSD(
destinationChainId,
gasUsage[destinationChainId] + getMessageGasUsage(destinationChainId, messenger)
) / fromGasOracleScalingFactor[tokenAddress];
}
/**
* @dev Produces a hash of transfer parameters, which is used as a message to the bridge on the destination chain
* to notify that the tokens on the source chain has been sent.
* @param amount The amount of tokens being transferred.
* @param recipient The address of the recipient on the destination chain.
* @param sourceChainId The ID of the source chain.
* @param destinationChainId The ID of the destination chain.
* @param receiveToken The token being received on the destination chain.
* @param nonce The unique nonce.
* @param messenger The chosen way of delivering the message across chains.
*/
function hashMessage(
uint amount,
bytes32 recipient,
uint sourceChainId,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger
) external pure override returns (bytes32) {
return
keccak256(abi.encodePacked(amount, recipient, sourceChainId, receiveToken, nonce, messenger))
.replaceChainBytes(uint8(sourceChainId), uint8(destinationChainId));
}
function _sendTokens(
uint amount,
bytes32 recipient,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger,
uint bridgingFee
) internal {
require(destinationChainId != chainId, "Bridge: wrong destination chain");
require(otherBridgeTokens[destinationChainId][receiveToken], "Bridge: unknown chain or token");
bytes32 message = this.hashMessage(
amount,
recipient,
chainId,
destinationChainId,
receiveToken,
nonce,
messenger
);
require(sentMessages[message] == 0, "Bridge: tokens already sent");
// mark the transfer as sent on the source chain
sentMessages[message] = 1;
uint bridgeTransactionCost = this.getTransactionCost(destinationChainId);
uint messageTransactionCost = _sendMessage(message, messenger);
emit ReceiveFee(bridgeTransactionCost, messageTransactionCost);
unchecked {
require(bridgingFee >= bridgeTransactionCost + messageTransactionCost, "Bridge: not enough fee");
}
emit TokensSent(amount, recipient, destinationChainId, receiveToken, nonce, messenger);
}
/**
* @dev Charges the bridging fee in tokens and calculates the amount of native tokens that correspond
* to the charged fee using the current exchange rate.
* @param user The address of the user who is paying the bridging fee
* @param tokenAddress The address of the token used to pay the bridging fee
* @param feeTokenAmount The amount of tokens to pay as the bridging fee
* @return bridging fee amount in the native tokens (e.g. in wei for Ethereum)
*/
function _convertBridgingFeeInTokensToNativeToken(
address user,
bytes32 tokenAddress,
uint feeTokenAmount
) internal returns (uint) {
if (feeTokenAmount == 0) return 0;
address tokenAddress_ = address(uint160(uint(tokenAddress)));
IERC20 token = IERC20(tokenAddress_);
token.safeTransferFrom(user, address(this), feeTokenAmount);
uint fee = (bridgingFeeConversionScalingFactor[tokenAddress_] * feeTokenAmount) / gasOracle.price(chainId);
emit BridgingFeeFromTokens(fee);
return fee;
}
fallback() external payable {
revert("Unsupported");
}
receive() external payable {
emit Received(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
/**
* @title GasOracle
* @dev A contract that provides gas price and native token USD price data on other blockchains.
*/
contract GasOracle is Ownable, IGasOracle {
struct ChainData {
// price of the chain's native token in USD
uint128 price;
// price of a gas unit in the chain's native token with precision according to the const ORACLE_PRECISION
uint128 gasPrice;
}
uint private constant ORACLE_PRECISION = 18;
uint private constant ORACLE_SCALING_FACTOR = 10 ** ORACLE_PRECISION;
// number to divide by to change precision from gas oracle price precision to chain precision
uint private immutable fromOracleToChainScalingFactor;
mapping(uint chainId => ChainData) public override chainData;
// current chain ID
uint public immutable override chainId;
constructor(uint chainId_, uint chainPrecision) {
chainId = chainId_;
fromOracleToChainScalingFactor = 10 ** (ORACLE_PRECISION - chainPrecision);
}
/**
* @notice Sets the chain data for a given chain ID.
* @param chainId_ The ID of the given chain to set data for.
* @param price_ The price of the given chain's native token in USD.
* @param gasPrice The price of a gas unit in the given chain's native token (with precision according to the const
* `ORACLE_PRECISION`).
*/
function setChainData(uint chainId_, uint128 price_, uint128 gasPrice) external override onlyOwner {
chainData[chainId_].price = price_;
chainData[chainId_].gasPrice = gasPrice;
}
/**
* @notice Sets only the price for a given chain ID.
* @param chainId_ The ID of the given chain to set the price for.
* @param price_ The price of the given chain's native token in USD.
*/
function setPrice(uint chainId_, uint128 price_) external override onlyOwner {
chainData[chainId_].price = price_;
}
/**
* @notice Sets only the gas price for a given chain ID.
* @param chainId_ The ID of the given chain to set the gas price for.
* @param gasPrice The price of a gas unit in the given chain's native token (with precision according to the const
* `ORACLE_PRECISION`).
*/
function setGasPrice(uint chainId_, uint128 gasPrice) external override onlyOwner {
chainData[chainId_].gasPrice = gasPrice;
}
/**
* @notice Calculates the gas cost of a transaction on another chain in the current chain's native token.
* @param otherChainId The ID of the chain for which to get the gas cost.
* @param gasAmount The amount of gas used in a transaction.
* @return The gas cost of a transaction in the current chain's native token
*/
function getTransactionGasCostInNativeToken(
uint otherChainId,
uint gasAmount
) external view override returns (uint) {
return
(chainData[otherChainId].gasPrice * gasAmount * chainData[otherChainId].price) /
chainData[chainId].price /
fromOracleToChainScalingFactor;
}
/**
* @notice Calculates the gas cost of a transaction on another chain in USD.
* @param otherChainId The ID of the chain for which to get the gas cost.
* @param gasAmount The amount of gas used in a transaction.
* @return The gas cost of a transaction in USD with precision of `ORACLE_PRECISION`
*/
function getTransactionGasCostInUSD(uint otherChainId, uint gasAmount) external view override returns (uint) {
return (chainData[otherChainId].gasPrice * gasAmount * chainData[otherChainId].price) / ORACLE_SCALING_FACTOR;
}
/**
* @notice Get the cross-rate between the two chains' native tokens.
* @param otherChainId The ID of the other chain to get the cross-rate for.
*/
function crossRate(uint otherChainId) external view override returns (uint) {
return (chainData[otherChainId].price * ORACLE_SCALING_FACTOR) / chainData[chainId].price;
}
/**
* @notice Get the price of a given chain's native token in USD.
* @param chainId_ The ID of the given chain to get the price.
* @return the price of the given chain's native token in USD with precision of const ORACLE_PRECISION
*/
function price(uint chainId_) external view override returns (uint) {
return chainData[chainId_].price;
}
fallback() external payable {
revert("Unsupported");
}
receive() external payable {
revert("Unsupported");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
/**
* @dev Contract module which allows children to store typical gas usage of a certain transaction on another chain.
*/
abstract contract GasUsage is Ownable {
IGasOracle internal gasOracle;
mapping(uint chainId => uint amount) public gasUsage;
constructor(IGasOracle gasOracle_) {
gasOracle = gasOracle_;
}
/**
* @dev Sets the amount of gas used for a transaction on a given chain.
* @param chainId The ID of the chain.
* @param gasAmount The amount of gas used on the chain.
*/
function setGasUsage(uint chainId, uint gasAmount) external onlyOwner {
gasUsage[chainId] = gasAmount;
}
/**
* @dev Sets the Gas Oracle contract address.
* @param gasOracle_ The address of the Gas Oracle contract.
*/
function setGasOracle(IGasOracle gasOracle_) external onlyOwner {
gasOracle = gasOracle_;
}
/**
* @notice Get the gas cost of a transaction on another chain in the current chain's native token.
* @param chainId The ID of the chain for which to get the gas cost.
* @return The calculated gas cost of the transaction in the current chain's native token
*/
function getTransactionCost(uint chainId) external view returns (uint) {
unchecked {
return gasOracle.getTransactionGasCostInNativeToken(chainId, gasUsage[chainId]);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
library HashUtils {
function replaceChainBytes(
bytes32 data,
uint8 sourceChainId,
uint8 destinationChainId
) internal pure returns (bytes32 result) {
assembly {
mstore(0x00, data)
mstore8(0x00, sourceChainId)
mstore8(0x01, destinationChainId)
result := mload(0x0)
}
}
function hashWithSender(bytes32 message, bytes32 sender) internal pure returns (bytes32 result) {
assembly {
mstore(0x00, message)
mstore(0x20, sender)
result := or(
and(
message,
0xffff000000000000000000000000000000000000000000000000000000000000 // First 2 bytes
),
and(
keccak256(0x00, 0x40),
0x0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff // Last 30 bytes
)
)
}
}
function hashWithSenderAddress(bytes32 message, address sender) internal pure returns (bytes32 result) {
assembly {
mstore(0x00, message)
mstore(0x20, sender)
result := or(
and(
message,
0xffff000000000000000000000000000000000000000000000000000000000000 // First 2 bytes
),
and(
keccak256(0x00, 0x40),
0x0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff // Last 30 bytes
)
)
}
}
function hashed(bytes32 message) internal pure returns (bytes32 result) {
assembly {
mstore(0x00, message)
result := keccak256(0x00, 0x20)
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
enum MessengerProtocol {
None,
Allbridge,
Wormhole,
LayerZero
}
interface IBridge {
function chainId() external view returns (uint);
function processedMessages(bytes32) external view returns (uint);
function sentMessages(bytes32) external view returns (uint);
function otherBridges(uint) external view returns (bytes32);
function otherBridgeTokens(uint, bytes32) external view returns (bool);
function getBridgingCostInTokens(
uint destinationChainId,
MessengerProtocol messenger,
address tokenAddress
) external view returns (uint);
function hashMessage(
uint amount,
bytes32 recipient,
uint sourceChainId,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger
) external pure returns (bytes32);
function receiveTokens(
uint amount,
bytes32 recipient,
uint sourceChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger,
uint receiveAmountMin
) external payable;
function withdrawGasTokens(uint amount) external;
function registerBridge(uint chainId, bytes32 bridgeAddress) external;
function addBridgeToken(uint chainId, bytes32 tokenAddress) external;
function removeBridgeToken(uint chainId, bytes32 tokenAddress) external;
function swapAndBridge(
bytes32 token,
uint amount,
bytes32 recipient,
uint destinationChainId,
bytes32 receiveToken,
uint nonce,
MessengerProtocol messenger,
uint feeTokenAmount
) external payable;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
interface IGasOracle {
function chainData(uint chainId) external view returns (uint128 price, uint128 gasPrice);
function chainId() external view returns (uint);
function crossRate(uint otherChainId) external view returns (uint);
function getTransactionGasCostInNativeToken(uint otherChainId, uint256 gasAmount) external view returns (uint);
function getTransactionGasCostInUSD(uint otherChainId, uint256 gasAmount) external view returns (uint);
function price(uint chainId) external view returns (uint);
function setChainData(uint chainId, uint128 price, uint128 gasPrice) external;
function setGasPrice(uint chainId, uint128 gasPrice) external;
function setPrice(uint chainId, uint128 price) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
interface IMessenger {
function sentMessagesBlock(bytes32 message) external view returns (uint);
function receivedMessages(bytes32 message) external view returns (uint);
function sendMessage(bytes32 message) external payable;
function receiveMessage(bytes32 message, uint v1v2, bytes32 r1, bytes32 s1, bytes32 r2, bytes32 s2) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {MessengerProtocol} from "./IBridge.sol";
interface IRouter {
function canSwap() external view returns (uint8);
function swap(uint amount, bytes32 token, bytes32 receiveToken, address recipient, uint receiveAmountMin) external;
}
// contracts/Messages.sol
// SPDX-License-Identifier: Apache 2
pragma solidity ^0.8.18;
interface Structs {
struct Provider {
uint16 chainId;
uint16 governanceChainId;
bytes32 governanceContract;
}
struct GuardianSet {
address[] keys;
uint32 expirationTime;
}
struct Signature {
bytes32 r;
bytes32 s;
uint8 v;
uint8 guardianIndex;
}
struct VM {
uint8 version;
uint32 timestamp;
uint32 nonce;
uint16 emitterChainId;
bytes32 emitterAddress;
uint64 sequence;
uint8 consistencyLevel;
bytes payload;
uint32 guardianSetIndex;
Signature[] signatures;
bytes32 hash;
}
}
interface IWormhole is Structs {
event LogMessagePublished(
address indexed sender,
uint64 sequence,
uint32 nonce,
bytes payload,
uint8 consistencyLevel
);
function publishMessage(
uint32 nonce,
bytes memory payload,
uint8 consistencyLevel
) external payable returns (uint64 sequence);
function parseAndVerifyVM(
bytes calldata encodedVM
) external view returns (Structs.VM memory vm, bool valid, string memory reason);
function verifyVM(Structs.VM memory vm) external view returns (bool valid, string memory reason);
function verifySignatures(
bytes32 hash,
Structs.Signature[] memory signatures,
Structs.GuardianSet memory guardianSet
) external pure returns (bool valid, string memory reason);
function parseVM(bytes memory encodedVM) external pure returns (Structs.VM memory vm);
function getGuardianSet(uint32 index) external view returns (Structs.GuardianSet memory);
function getCurrentGuardianSetIndex() external view returns (uint32);
function getGuardianSetExpiry() external view returns (uint32);
function governanceActionIsConsumed(bytes32 hash) external view returns (bool);
function isInitialized(address impl) external view returns (bool);
function chainId() external view returns (uint16);
function governanceChainId() external view returns (uint16);
function governanceContract() external view returns (bytes32);
function messageFee() external view returns (uint);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
import {IMessenger} from "./interfaces/IMessenger.sol";
import {GasUsage} from "./GasUsage.sol";
import {HashUtils} from "./libraries/HashUtils.sol";
/**
* @dev This contract implements the Allbridge messenger cross-chain communication protocol.
*/
contract Messenger is Ownable, GasUsage, IMessenger {
using HashUtils for bytes32;
// current chain ID
uint public immutable chainId;
// supported destination chain IDs
bytes32 public otherChainIds;
// the primary account that is responsible for validation that a message has been sent on the source chain
address private primaryValidator;
// the secondary accounts that are responsible for validation that a message has been sent on the source chain
mapping(address => bool) private secondaryValidators;
mapping(bytes32 messageHash => uint blockNumber) public override sentMessagesBlock;
mapping(bytes32 messageHash => uint isReceived) public override receivedMessages;
event MessageSent(bytes32 indexed message);
event MessageReceived(bytes32 indexed message);
/**
* @dev Emitted when the contract receives native gas tokens (e.g. Ether on the Ethereum network).
*/
event Received(address, uint);
/**
* @dev Emitted when the mapping of secondary validators is updated.
*/
event SecondaryValidatorsSet(address[] oldValidators, address[] newValidators);
constructor(
uint chainId_,
bytes32 otherChainIds_,
IGasOracle gasOracle_,
address primaryValidator_,
address[] memory validators
) GasUsage(gasOracle_) {
chainId = chainId_;
otherChainIds = otherChainIds_;
primaryValidator = primaryValidator_;
uint length = validators.length;
for (uint index; index < length; ) {
secondaryValidators[validators[index]] = true;
unchecked {
index++;
}
}
}
/**
* @notice Sends a message to another chain.
* @dev Emits a {MessageSent} event, which signals to the off-chain messaging service to invoke the `receiveMessage`
* function on the destination chain to deliver the message.
*
* Requirements:
*
* - the first byte of the message must be the current chain ID.
* - the second byte of the message must be the destination chain ID.
* - the same message cannot be sent second time.
* - messaging fee must be payed. (See `getTransactionCost` of the `GasUsage` contract).
* @param message The message to be sent to the destination chain.
*/
function sendMessage(bytes32 message) external payable override {
require(uint8(message[0]) == chainId, "Messenger: wrong chainId");
require(otherChainIds[uint8(message[1])] != 0, "Messenger: wrong destination");
bytes32 messageWithSender = message.hashWithSenderAddress(msg.sender);
require(sentMessagesBlock[messageWithSender] == 0, "Messenger: has message");
sentMessagesBlock[messageWithSender] = block.number;
require(msg.value >= this.getTransactionCost(uint8(message[1])), "Messenger: not enough fee");
emit MessageSent(messageWithSender);
}
/**
* @notice Delivers a message to the destination chain.
* @dev Emits an {MessageReceived} event indicating the message has been delivered.
*
* Requirements:
*
* - a valid signature of the primary validator.
* - a valid signature of one of the secondary validators.
* - the second byte of the message must be the current chain ID.
*/
function receiveMessage(
bytes32 message,
uint v1v2,
bytes32 r1,
bytes32 s1,
bytes32 r2,
bytes32 s2
) external override {
bytes32 hashedMessage = message.hashed();
require(ecrecover(hashedMessage, uint8(v1v2 >> 8), r1, s1) == primaryValidator, "Messenger: invalid primary");
require(secondaryValidators[ecrecover(hashedMessage, uint8(v1v2), r2, s2)], "Messenger: invalid secondary");
require(uint8(message[1]) == chainId, "Messenger: wrong chainId");
receivedMessages[message] = 1;
emit MessageReceived(message);
}
/**
* @dev Allows the admin to withdraw the messaging fee collected in native gas tokens.
*/
function withdrawGasTokens(uint amount) external onlyOwner {
payable(msg.sender).transfer(amount);
}
/**
* @dev Allows the admin to set the primary validator address.
*/
function setPrimaryValidator(address value) external onlyOwner {
primaryValidator = value;
}
/**
* @dev Allows the admin to set the addresses of secondary validators.
*/
function setSecondaryValidators(address[] memory oldValidators, address[] memory newValidators) external onlyOwner {
uint length = oldValidators.length;
uint index;
for (; index < length; ) {
secondaryValidators[oldValidators[index]] = false;
unchecked {
index++;
}
}
length = newValidators.length;
index = 0;
for (; index < length; ) {
secondaryValidators[newValidators[index]] = true;
unchecked {
index++;
}
}
emit SecondaryValidatorsSet(oldValidators, newValidators);
}
/**
* @dev Allows the admin to update a list of supported destination chain IDs
* @param value Each byte of the `value` parameter represents whether a chain ID with such index is supported
* as a valid message destination.
*/
function setOtherChainIds(bytes32 value) external onlyOwner {
otherChainIds = value;
}
fallback() external payable {
revert("Unsupported");
}
receive() external payable {
emit Received(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
import {Messenger} from "./Messenger.sol";
import {MessengerProtocol} from "./interfaces/IBridge.sol";
import {WormholeMessenger} from "./WormholeMessenger.sol";
/**
* @dev This abstract contract provides functions for cross-chain communication and supports different messaging
* protocols.
*/
abstract contract MessengerGateway is Ownable {
Messenger private allbridgeMessenger;
WormholeMessenger private wormholeMessenger;
constructor(Messenger allbridgeMessenger_, WormholeMessenger wormholeMessenger_) {
allbridgeMessenger = allbridgeMessenger_;
wormholeMessenger = wormholeMessenger_;
}
/**
* @dev Sets the Allbridge Messenger contract address.
* @param allbridgeMessenger_ The address of the Messenger contract.
*/
function setAllbridgeMessenger(Messenger allbridgeMessenger_) external onlyOwner {
allbridgeMessenger = allbridgeMessenger_;
}
/**
* @dev Sets the Wormhole Messenger contract address.
* @param wormholeMessenger_ The address of the WormholeMessenger contract.
*/
function setWormholeMessenger(WormholeMessenger wormholeMessenger_) external onlyOwner {
wormholeMessenger = wormholeMessenger_;
}
/**
* @notice Get the gas cost of a messaging transaction on another chain in the current chain's native token.
* @param chainId The ID of the chain where to send the message.
* @param protocol The messenger used to send the message.
* @return The calculated gas cost of the messaging transaction in the current chain's native token.
*/
function getMessageCost(uint chainId, MessengerProtocol protocol) external view returns (uint) {
if (protocol == MessengerProtocol.Allbridge) {
return allbridgeMessenger.getTransactionCost(chainId);
} else if (protocol == MessengerProtocol.Wormhole) {
return wormholeMessenger.getTransactionCost(chainId);
}
return 0;
}
/**
* @notice Get the amount of gas a messaging transaction uses on a given chain.
* @param chainId The ID of the chain where to send the message.
* @param protocol The messenger used to send the message.
* @return The amount of gas a messaging transaction uses.
*/
function getMessageGasUsage(uint chainId, MessengerProtocol protocol) public view returns (uint) {
if (protocol == MessengerProtocol.Allbridge) {
return allbridgeMessenger.gasUsage(chainId);
} else if (protocol == MessengerProtocol.Wormhole) {
return wormholeMessenger.gasUsage(chainId);
}
return 0;
}
/**
* @notice Checks whether a given message has been received via the specified messenger protocol.
* @param message The message to check.
* @param protocol The messenger used to send the message.
* @return A boolean indicating whether the message has been received.
*/
function hasReceivedMessage(bytes32 message, MessengerProtocol protocol) external view returns (bool) {
if (protocol == MessengerProtocol.Allbridge) {
return allbridgeMessenger.receivedMessages(message) != 0;
} else if (protocol == MessengerProtocol.Wormhole) {
return wormholeMessenger.receivedMessages(message) != 0;
} else {
revert("Not implemented");
}
}
/**
* @notice Checks whether a given message has been sent.
* @param message The message to check.
* @return A boolean indicating whether the message has been sent.
*/
function hasSentMessage(bytes32 message) external view returns (bool) {
return allbridgeMessenger.sentMessagesBlock(message) != 0 || wormholeMessenger.sentMessages(message) != 0;
}
function _sendMessage(bytes32 message, MessengerProtocol protocol) internal returns (uint messageCost) {
if (protocol == MessengerProtocol.Allbridge) {
messageCost = allbridgeMessenger.getTransactionCost(uint8(message[1]));
allbridgeMessenger.sendMessage{value: messageCost}(message);
} else if (protocol == MessengerProtocol.Wormhole) {
messageCost = wormholeMessenger.getTransactionCost(uint8(message[1]));
wormholeMessenger.sendMessage{value: messageCost}(message);
} else {
revert("Not implemented");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import {RewardManager} from "./RewardManager.sol";
/**
* 4AD - D = 4A(x + y) - (D³ / 4xy)
* X - is value of real stable token
* Y - is value of virtual usd
*/
contract Pool is RewardManager {
using SafeERC20 for ERC20;
uint private constant SYSTEM_PRECISION = 3;
int private constant PP = 1e4; // Price Precision
uint private constant MAX_TOKEN_BALANCE = 2 ** 40; // Max possible token balance
/**
* @dev Gas optimization: both the 'feeShareBP' and 'router' fields are used during the 'swapFromVUsd', 'swapToVUsd'
* operations and can occupy the same slot.
*/
uint16 public feeShareBP;
address public router;
uint public tokenBalance;
uint public vUsdBalance;
uint public balanceRatioMinBP;
uint public reserves;
uint public immutable a;
uint public d;
uint private immutable tokenAmountReduce;
uint private immutable tokenAmountIncrease;
// can restrict deposit or withdraw operations
address private stopAuthority;
// is deposit operation allowed
uint public canDeposit = 1;
// is withdraw operation allowed
uint public canWithdraw = 1;
event SwappedToVUsd(address sender, address token, uint amount, uint vUsdAmount, uint fee);
event SwappedFromVUsd(address recipient, address token, uint vUsdAmount, uint amount, uint fee);
constructor(
address router_,
uint a_,
ERC20 token_,
uint16 feeShareBP_,
uint balanceRatioMinBP_,
string memory lpName,
string memory lpSymbol
) RewardManager(token_, lpName, lpSymbol) {
a = a_;
router = router_;
stopAuthority = owner();
feeShareBP = feeShareBP_;
balanceRatioMinBP = balanceRatioMinBP_;
uint decimals = token_.decimals();
tokenAmountReduce = decimals > SYSTEM_PRECISION ? 10 ** (decimals - SYSTEM_PRECISION) : 0;
tokenAmountIncrease = decimals < SYSTEM_PRECISION ? 10 ** (SYSTEM_PRECISION - decimals) : 0;
}
/**
* @dev Throws if called by any account other than the router.
*/
modifier onlyRouter() {
require(router == msg.sender, "Pool: is not router");
_;
}
/**
* @dev Throws if called by any account other than the stopAuthority.
*/
modifier onlyStopAuthority() {
require(stopAuthority == msg.sender, "Pool: is not stopAuthority");
_;
}
/**
* @dev Modifier to prevent function from disbalancing the pool over a threshold defined by `balanceRatioMinBP`
*/
modifier validateBalanceRatio() {
_;
if (tokenBalance > vUsdBalance) {
require((vUsdBalance * BP) / tokenBalance >= balanceRatioMinBP, "Pool: low vUSD balance");
} else if (tokenBalance < vUsdBalance) {
require((tokenBalance * BP) / vUsdBalance >= balanceRatioMinBP, "Pool: low token balance");
}
}
/**
* @dev Modifier to make a function callable only when the deposit is allowed.
*/
modifier whenCanDeposit() {
require(canDeposit == 1, "Pool: deposit prohibited");
_;
}
/**
* @dev Modifier to make a function callable only when the withdraw is allowed.
*/
modifier whenCanWithdraw() {
require(canWithdraw == 1, "Pool: withdraw prohibited");
_;
}
/**
* @dev Calculates the price and deposit token according to the amount and price, then adds the same amount to the X
* and to the Y
* @param amount The deposited amount
*/
function deposit(uint amount) external whenCanDeposit {
uint oldD = d;
uint amountSP = _toSystemPrecision(amount);
require(amountSP > 0, "Pool: too little");
token.safeTransferFrom(msg.sender, address(this), amount);
// Add deposited amount to reserves
reserves += amountSP;
uint oldBalance = (tokenBalance + vUsdBalance);
if (oldD == 0 || oldBalance == 0) {
// Split balance equally on the first deposit
uint halfAmount = amountSP >> 1;
tokenBalance += halfAmount;
vUsdBalance += halfAmount;
} else {
// Add amount proportionally to each pool
tokenBalance += (amountSP * tokenBalance) / oldBalance;
vUsdBalance += (amountSP * vUsdBalance) / oldBalance;
}
_updateD();
// Deposit as many LP tokens as the D increase
_depositLp(msg.sender, d - oldD);
require(tokenBalance < MAX_TOKEN_BALANCE, "Pool: too much");
}
/*
* @dev Subtracts X and Y for that amount, calculates current price and withdraw the token to the user according to
* the price
* @param amount The deposited amount
*/
function withdraw(uint amountLp) external whenCanWithdraw {
uint oldD = d;
_withdrawLp(msg.sender, amountLp);
// Always withdraw tokens in amount equal to amountLp
// Withdraw proportionally from token and vUsd balance
uint oldBalance = (tokenBalance + vUsdBalance);
tokenBalance -= (amountLp * tokenBalance) / oldBalance;
vUsdBalance -= (amountLp * vUsdBalance) / oldBalance;
require(tokenBalance + vUsdBalance < oldBalance, "Pool: zero changes");
// Check if there is enough funds in reserve to withdraw
require(amountLp <= reserves, "Pool: reserves");
// Adjust reserves by withdraw amount
reserves -= amountLp;
// Update D and transfer tokens to the sender
_updateD();
require(d < oldD, "Pool: zero D changes");
token.safeTransfer(msg.sender, _fromSystemPrecision(amountLp));
}
/**
* @notice Calculates new virtual USD value from the given amount of tokens.
* @dev Calculates new Y according to new X.
* NOTICE: Prior to calling this the router must transfer tokens from the user to the pool.
* @param amount The amount of tokens to swap.
* @param zeroFee When true it allows to swap without incurring any fees. It is intended for use with service
* accounts.
* @return returns the difference between the old and the new value of vUsdBalance
*/
function swapToVUsd(
address user,
uint amount,
bool zeroFee
) external onlyRouter validateBalanceRatio returns (uint) {
uint result; // 0 by default
uint fee;
if (amount > 0) {
if (!zeroFee) {
fee = (amount * feeShareBP) / BP;
}
uint amountIn = _toSystemPrecision(amount - fee);
// Incorporate rounding dust into the fee
fee = amount - _fromSystemPrecision(amountIn);
// Adjust token and reserve balances after the fee is applied
tokenBalance += amountIn;
reserves += amountIn;
uint vUsdNewAmount = this.getY(tokenBalance);
if (vUsdBalance > vUsdNewAmount) {
result = vUsdBalance - vUsdNewAmount;
}
vUsdBalance = vUsdNewAmount;
_addRewards(fee);
}
emit SwappedToVUsd(user, address(token), amount, result, fee);
return result;
}
/**
* @notice Calculates the amount of tokens from the given virtual USD value, and transfers it to the user.
* @dev Calculates new X according to new Y.
* @param user The address of the recipient.
* @param amount The amount of vUSD to swap.
* @param receiveAmountMin The minimum amount of tokens required to be received during the swap, otherwise the
* transaction reverts.
* @param zeroFee When true it allows to swap without incurring any fees. It is intended for use with service
* accounts.
* @return returns the difference between the old and the new value of vUsdBalance
*/
function swapFromVUsd(
address user,
uint amount,
uint receiveAmountMin,
bool zeroFee
) external onlyRouter validateBalanceRatio returns (uint) {
uint resultSP; // 0 by default
uint result; // 0 by default
uint fee;
if (amount > 0) {
vUsdBalance += amount;
uint newAmount = this.getY(vUsdBalance);
if (tokenBalance > newAmount) {
resultSP = tokenBalance - newAmount;
result = _fromSystemPrecision(resultSP);
} // Otherwise result/resultSP stay 0
// Check if there is enough funds in reserve to pay
require(resultSP <= reserves, "Pool: reserves");
// Remove from reserves including fee, apply fee later
reserves -= resultSP;
if (!zeroFee) {
fee = (result * feeShareBP) / BP;
}
// We can use unchecked here because feeShareBP <= BP
unchecked {
result -= fee;
}
tokenBalance = newAmount;
require(result >= receiveAmountMin, "Pool: slippage");
token.safeTransfer(user, result);
_addRewards(fee);
}
emit SwappedFromVUsd(user, address(token), amount, result, fee);
return result;
}
/**
* @dev Sets admin fee share.
*/
function setFeeShare(uint16 feeShareBP_) external onlyOwner {
require(feeShareBP_ <= BP, "Pool: too large");
feeShareBP = feeShareBP_;
}
function adjustTotalLpAmount() external onlyOwner {
if (d > totalSupply()) {
_depositLp(owner(), d - totalSupply());
}
}
/**
* @dev Sets the threshold over which the pool can't be disbalanced.
*/
function setBalanceRatioMinBP(uint balanceRatioMinBP_) external onlyOwner {
require(balanceRatioMinBP_ <= BP, "Pool: too large");
balanceRatioMinBP = balanceRatioMinBP_;
}
/**
* @dev Switches off the possibility to make deposits.
*/
function stopDeposit() external onlyStopAuthority {
canDeposit = 0;
}
/**
* @dev Switches on the possibility to make deposits.
*/
function startDeposit() external onlyOwner {
canDeposit = 1;
}
/**
* @dev Switches off the possibility to make withdrawals.
*/
function stopWithdraw() external onlyStopAuthority {
canWithdraw = 0;
}
/**
* @dev Switches on the possibility to make withdrawals.
*/
function startWithdraw() external onlyOwner {
canWithdraw = 1;
}
/**
* @dev Sets the address of the stopAuthority account.
*/
function setStopAuthority(address stopAuthority_) external onlyOwner {
stopAuthority = stopAuthority_;
}
/**
* @dev Sets the address of the Router contract.
*/
function setRouter(address router_) external onlyOwner {
router = router_;
}
/**
* @dev y = (sqrt(x(4AD³ + x (4A(D - x) - D )²)) + x (4A(D - x) - D ))/8Ax.
*/
function getY(uint x) external view returns (uint) {
uint d_ = d; // Gas optimization
uint a4 = a << 2;
uint a8 = a4 << 1;
// 4A(D - x) - D
int part1 = int(a4) * (int(d_) - int(x)) - int(d_);
// x * (4AD³ + x(part1²))
uint part2 = x * (a4 * d_ * d_ * d_ + x * uint(part1 * part1));
// (sqrt(part2) + x(part1)) / 8Ax)
return SafeCast.toUint256(int(_sqrt(part2)) + int(x) * part1) / (a8 * x) + 1; // +1 to offset rounding errors
}
/**
* @dev price = (1/2) * ((D³ + 8ADx² - 8Ax³ - 2Dx²) / (4x * sqrt(x(4AD³ + x (4A(D - x) - D )²))))
*/
function getPrice() external view returns (uint) {
uint x = tokenBalance;
uint a8 = a << 3;
uint dCubed = d * d * d;
// 4A(D - x) - D
int p1 = int(a << 2) * (int(d) - int(x)) - int(d);
// x * 4AD³ + x(p1²)
uint p2 = x * ((a << 2) * dCubed + x * uint(p1 * p1));
// D³ + 8ADx² - 8Ax³ - 2Dx²
int p3 = int(dCubed) + int((a << 3) * d * x * x) - int(a8 * x * x * x) - int((d << 1) * x * x);
// 1/2 * p3 / (4x * sqrt(p2))
return SafeCast.toUint256((PP >> 1) + ((PP * p3) / int((x << 2) * _sqrt(p2))));
}
function _updateD() internal {
uint x = tokenBalance;
uint y = vUsdBalance;
// a = 8 * Axy(x+y)
// b = 4 * xy(4A - 1) / 3
// c = sqrt(a² + b³)
// D = cbrt(a + c) + cbrt(a - c)
uint xy = x * y;
uint a_ = a;
// Axy(x+y)
uint p1 = a_ * xy * (x + y);
// xy(4A - 1) / 3
uint p2 = (xy * ((a_ << 2) - 1)) / 3;
// p1² + p2³
uint p3 = _sqrt((p1 * p1) + (p2 * p2 * p2));
unchecked {
uint d_ = _cbrt(p1 + p3);
if (p3 > p1) {
d_ -= _cbrt(p3 - p1);
} else {
d_ += _cbrt(p1 - p3);
}
d = (d_ << 1);
}
}
function _toSystemPrecision(uint amount) internal view returns (uint) {
if (tokenAmountReduce > 0) {
return amount / tokenAmountReduce;
} else if (tokenAmountIncrease > 0) {
return amount * tokenAmountIncrease;
}
return amount;
}
function _fromSystemPrecision(uint amount) internal view returns (uint) {
if (tokenAmountReduce > 0) {
return amount * tokenAmountReduce;
} else if (tokenAmountIncrease > 0) {
return amount / tokenAmountIncrease;
}
return amount;
}
function _sqrt(uint n) internal pure returns (uint) {
unchecked {
if (n > 0) {
uint x = (n >> 1) + 1;
uint y = (x + n / x) >> 1;
while (x > y) {
x = y;
y = (x + n / x) >> 1;
}
return x;
}
return 0;
}
}
function _cbrt(uint n) internal pure returns (uint) {
unchecked {
uint x = 0;
for (uint y = 1 << 255; y > 0; y >>= 3) {
x <<= 1;
uint z = 3 * x * (x + 1) + 1;
if (n / y >= z) {
n -= y * z;
x += 1;
}
}
return x;
}
}
fallback() external payable {
revert("Unsupported");
}
receive() external payable {
revert("Unsupported");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
contract RewardManager is Ownable, ERC20 {
using SafeERC20 for ERC20;
uint private constant P = 52;
uint internal constant BP = 1e4;
// Accumulated rewards per share, shifted left by P bits
uint public accRewardPerShareP;
// Reward token
ERC20 public immutable token;
// Info of each user reward debt
mapping(address user => uint amount) public userRewardDebt;
// Admin fee share (in basis points)
uint public adminFeeShareBP;
// Unclaimed admin fee amount
uint public adminFeeAmount;
event Deposit(address indexed user, uint amount);
event Withdraw(address indexed user, uint amount);
event RewardsClaimed(address indexed user, uint amount);
constructor(ERC20 token_, string memory lpName, string memory lpSymbol) ERC20(lpName, lpSymbol) {
token = token_;
// Default admin fee is 20%
adminFeeShareBP = BP / 5;
}
/**
* @notice Claims pending rewards for the current staker without updating the stake balance.
*/
function claimRewards() external {
uint userLpAmount = balanceOf(msg.sender);
if (userLpAmount > 0) {
uint rewards = (userLpAmount * accRewardPerShareP) >> P;
uint pending = rewards - userRewardDebt[msg.sender];
if (pending > 0) {
userRewardDebt[msg.sender] = rewards;
token.safeTransfer(msg.sender, pending);
emit RewardsClaimed(msg.sender, pending);
}
}
}
/**
* @notice Sets the basis points of the admin fee share from rewards.
*/
function setAdminFeeShare(uint adminFeeShareBP_) external onlyOwner {
require(adminFeeShareBP_ <= BP, "RewardManager: too high");
adminFeeShareBP = adminFeeShareBP_;
}
/**
* @notice Allows the admin to claim the collected admin fee.
*/
function claimAdminFee() external onlyOwner {
if (adminFeeAmount > 0) {
token.safeTransfer(msg.sender, adminFeeAmount);
adminFeeAmount = 0;
}
}
/**
* @notice Returns pending rewards for the staker.
* @param user The address of the staker.
*/
function pendingReward(address user) external view returns (uint) {
return ((balanceOf(user) * accRewardPerShareP) >> P) - userRewardDebt[user];
}
/**
* @dev Returns the number of decimals used to get user representation of LP tokens.
*/
function decimals() public pure override returns (uint8) {
return 3;
}
/**
* @dev Adds reward to the pool, splits admin fee share and updates the accumulated rewards per share.
*/
function _addRewards(uint rewardAmount) internal {
if (totalSupply() > 0) {
uint adminFeeRewards = (rewardAmount * adminFeeShareBP) / BP;
unchecked {
rewardAmount -= adminFeeRewards;
}
accRewardPerShareP += (rewardAmount << P) / totalSupply();
adminFeeAmount += adminFeeRewards;
}
}
/**
* @dev Deposits LP amount for the user, updates user reward debt and pays pending rewards.
*/
function _depositLp(address to, uint lpAmount) internal {
uint pending;
uint userLpAmount = balanceOf(to); // Gas optimization
if (userLpAmount > 0) {
pending = ((userLpAmount * accRewardPerShareP) >> P) - userRewardDebt[to];
}
userLpAmount += lpAmount;
_mint(to, lpAmount);
userRewardDebt[to] = (userLpAmount * accRewardPerShareP) >> P;
if (pending > 0) {
token.safeTransfer(to, pending);
emit RewardsClaimed(to, pending);
}
emit Deposit(to, lpAmount);
}
/**
* @dev Withdraws LP amount for the user, updates user reward debt and pays out pending rewards.
*/
function _withdrawLp(address from, uint lpAmount) internal {
uint userLpAmount = balanceOf(from); // Gas optimization
require(userLpAmount >= lpAmount, "RewardManager: not enough amount");
uint pending;
if (userLpAmount > 0) {
pending = ((userLpAmount * accRewardPerShareP) >> P) - userRewardDebt[from];
}
userLpAmount -= lpAmount;
_burn(from, lpAmount);
userRewardDebt[from] = (userLpAmount * accRewardPerShareP) >> P;
if (pending > 0) {
token.safeTransfer(from, pending);
emit RewardsClaimed(from, pending);
}
emit Withdraw(from, lpAmount);
}
function _transfer(address, address, uint) internal pure override {
revert("Unsupported");
}
function _approve(address, address, uint) internal pure override {
revert("Unsupported");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IRouter} from "./interfaces/IRouter.sol";
import {MessengerProtocol} from "./interfaces/IBridge.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Pool} from "./Pool.sol";
abstract contract Router is Ownable, IRouter {
using SafeERC20 for ERC20;
uint private immutable chainPrecision;
uint internal constant ORACLE_PRECISION = 18;
mapping(bytes32 tokenId => Pool) public pools;
// precomputed values to divide by to change the precision from the Gas Oracle precision to the token precision
mapping(address tokenAddress => uint scalingFactor) internal fromGasOracleScalingFactor;
// precomputed values of the scaling factor required for paying the bridging fee with stable tokens
mapping(address tokenAddress => uint scalingFactor) internal bridgingFeeConversionScalingFactor;
// can restrict swap operations
address private stopAuthority;
/**
* @dev The rebalancer is an account responsible for balancing the liquidity pools. It ensures that the pool is
* balanced by executing zero-fee swaps when the pool is imbalanced.
*
* Gas optimization: both the 'rebalancer' and 'canSwap' fields are used in the 'swap' and 'swapAndBridge'
* functions and can occupy the same slot.
*/
address private rebalancer;
uint8 public override canSwap = 1;
/**
* @dev Emitted during the on-chain swap of tokens.
*/
event Swapped(
address sender,
address recipient,
bytes32 sendToken,
bytes32 receiveToken,
uint sendAmount,
uint receiveAmount
);
constructor(uint chainPrecision_) {
chainPrecision = chainPrecision_;
stopAuthority = owner();
}
/**
* @dev Modifier to make a function callable only when the swap is allowed.
*/
modifier whenCanSwap() {
require(canSwap == 1, "Router: swap prohibited");
_;
}
/**
* @dev Throws if called by any account other than the stopAuthority.
*/
modifier onlyStopAuthority() {
require(stopAuthority == msg.sender, "Router: is not stopAuthority");
_;
}
/**
* @notice Swaps a given pair of tokens on the same blockchain.
* @param amount The amount of tokens to be swapped.
* @param token The token to be swapped.
* @param receiveToken The token to receive in exchange for the swapped token.
* @param recipient The address to receive the tokens.
* @param receiveAmountMin The minimum amount of tokens required to receive during the swap.
*/
function swap(
uint amount,
bytes32 token,
bytes32 receiveToken,
address recipient,
uint receiveAmountMin
) external override whenCanSwap {
uint vUsdAmount = _sendAndSwapToVUsd(token, msg.sender, amount);
uint receivedAmount = _receiveAndSwapFromVUsd(receiveToken, recipient, vUsdAmount, receiveAmountMin);
emit Swapped(msg.sender, recipient, token, receiveToken, amount, receivedAmount);
}
/**
* @notice Allows the admin to add new supported liquidity pools.
* @dev Adds the address of the `Pool` contract to the list of supported liquidity pools.
* @param pool The address of the `Pool` contract.
* @param token The address of the token in the liquidity pool.
*/
function addPool(Pool pool, bytes32 token) external onlyOwner {
pools[token] = pool;
address tokenAddress = address(uint160(uint(token)));
uint tokenDecimals = ERC20(tokenAddress).decimals();
bridgingFeeConversionScalingFactor[tokenAddress] = 10 ** (ORACLE_PRECISION - tokenDecimals + chainPrecision);
fromGasOracleScalingFactor[tokenAddress] = 10 ** (ORACLE_PRECISION - tokenDecimals);
}
/**
* @dev Switches off the possibility to make swaps.
*/
function stopSwap() external onlyStopAuthority {
canSwap = 0;
}
/**
* @dev Switches on the possibility to make swaps.
*/
function startSwap() external onlyOwner {
canSwap = 1;
}
/**
* @dev Allows the admin to set the address of the stopAuthority.
*/
function setStopAuthority(address stopAuthority_) external onlyOwner {
stopAuthority = stopAuthority_;
}
/**
* @dev Allows the admin to set the address of the rebalancer.
*/
function setRebalancer(address rebalancer_) external onlyOwner {
rebalancer = rebalancer_;
}
function _receiveAndSwapFromVUsd(
bytes32 token,
address recipient,
uint vUsdAmount,
uint receiveAmountMin
) internal returns (uint) {
Pool tokenPool = pools[token];
require(address(tokenPool) != address(0), "Router: no receive pool");
return tokenPool.swapFromVUsd(recipient, vUsdAmount, receiveAmountMin, recipient == rebalancer);
}
function _sendAndSwapToVUsd(bytes32 token, address user, uint amount) internal virtual returns (uint) {
Pool pool = pools[token];
require(address(pool) != address(0), "Router: no pool");
ERC20(address(uint160(uint(token)))).safeTransferFrom(user, address(pool), amount);
return pool.swapToVUsd(user, amount, user == rebalancer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toUint248(uint256 value) internal pure returns (uint248) {
require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toUint240(uint256 value) internal pure returns (uint240) {
require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toUint232(uint256 value) internal pure returns (uint232) {
require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.2._
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toUint216(uint256 value) internal pure returns (uint216) {
require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toUint208(uint256 value) internal pure returns (uint208) {
require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toUint200(uint256 value) internal pure returns (uint200) {
require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toUint192(uint256 value) internal pure returns (uint192) {
require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toUint184(uint256 value) internal pure returns (uint184) {
require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toUint176(uint256 value) internal pure returns (uint176) {
require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toUint168(uint256 value) internal pure returns (uint168) {
require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toUint160(uint256 value) internal pure returns (uint160) {
require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toUint152(uint256 value) internal pure returns (uint152) {
require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toUint144(uint256 value) internal pure returns (uint144) {
require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toUint136(uint256 value) internal pure returns (uint136) {
require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v2.5._
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toUint120(uint256 value) internal pure returns (uint120) {
require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toUint112(uint256 value) internal pure returns (uint112) {
require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.2._
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toUint88(uint256 value) internal pure returns (uint88) {
require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toUint80(uint256 value) internal pure returns (uint80) {
require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toUint72(uint256 value) internal pure returns (uint72) {
require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v2.5._
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toUint56(uint256 value) internal pure returns (uint56) {
require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toUint48(uint256 value) internal pure returns (uint48) {
require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toUint40(uint256 value) internal pure returns (uint40) {
require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v2.5._
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toUint24(uint256 value) internal pure returns (uint24) {
require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v2.5._
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v2.5._
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*
* _Available since v3.0._
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toInt248(int256 value) internal pure returns (int248 downcasted) {
downcasted = int248(value);
require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toInt240(int256 value) internal pure returns (int240 downcasted) {
downcasted = int240(value);
require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toInt232(int256 value) internal pure returns (int232 downcasted) {
downcasted = int232(value);
require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.7._
*/
function toInt224(int256 value) internal pure returns (int224 downcasted) {
downcasted = int224(value);
require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toInt216(int256 value) internal pure returns (int216 downcasted) {
downcasted = int216(value);
require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toInt208(int256 value) internal pure returns (int208 downcasted) {
downcasted = int208(value);
require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toInt200(int256 value) internal pure returns (int200 downcasted) {
downcasted = int200(value);
require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toInt192(int256 value) internal pure returns (int192 downcasted) {
downcasted = int192(value);
require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toInt184(int256 value) internal pure returns (int184 downcasted) {
downcasted = int184(value);
require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toInt176(int256 value) internal pure returns (int176 downcasted) {
downcasted = int176(value);
require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toInt168(int256 value) internal pure returns (int168 downcasted) {
downcasted = int168(value);
require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toInt160(int256 value) internal pure returns (int160 downcasted) {
downcasted = int160(value);
require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toInt152(int256 value) internal pure returns (int152 downcasted) {
downcasted = int152(value);
require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toInt144(int256 value) internal pure returns (int144 downcasted) {
downcasted = int144(value);
require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toInt136(int256 value) internal pure returns (int136 downcasted) {
downcasted = int136(value);
require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128 downcasted) {
downcasted = int128(value);
require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toInt120(int256 value) internal pure returns (int120 downcasted) {
downcasted = int120(value);
require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toInt112(int256 value) internal pure returns (int112 downcasted) {
downcasted = int112(value);
require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toInt104(int256 value) internal pure returns (int104 downcasted) {
downcasted = int104(value);
require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.7._
*/
function toInt96(int256 value) internal pure returns (int96 downcasted) {
downcasted = int96(value);
require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toInt88(int256 value) internal pure returns (int88 downcasted) {
downcasted = int88(value);
require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toInt80(int256 value) internal pure returns (int80 downcasted) {
downcasted = int80(value);
require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toInt72(int256 value) internal pure returns (int72 downcasted) {
downcasted = int72(value);
require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64 downcasted) {
downcasted = int64(value);
require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toInt56(int256 value) internal pure returns (int56 downcasted) {
downcasted = int56(value);
require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toInt48(int256 value) internal pure returns (int48 downcasted) {
downcasted = int48(value);
require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toInt40(int256 value) internal pure returns (int40 downcasted) {
downcasted = int40(value);
require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32 downcasted) {
downcasted = int32(value);
require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toInt24(int256 value) internal pure returns (int24 downcasted) {
downcasted = int24(value);
require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16 downcasted) {
downcasted = int16(value);
require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8 downcasted) {
downcasted = int8(value);
require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*
* _Available since v3.0._
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
import {IMessenger} from "./interfaces/IMessenger.sol";
import {IWormhole} from "./interfaces/IWormhole.sol";
import {GasUsage} from "./GasUsage.sol";
import {GasOracle} from "./GasOracle.sol";
import {HashUtils} from "./libraries/HashUtils.sol";
contract WormholeMessenger is Ownable, GasUsage {
using HashUtils for bytes32;
IWormhole private immutable wormhole;
uint public immutable chainId;
bytes32 public otherChainIds;
uint32 private nonce;
uint8 private commitmentLevel;
mapping(uint16 chainId => bytes32 wormholeMessengerAddress) private otherWormholeMessengers;
mapping(bytes32 messageHash => uint isReceived) public receivedMessages;
mapping(bytes32 messageHash => uint isSent) public sentMessages;
event MessageSent(bytes32 indexed message, uint64 sequence);
event MessageReceived(bytes32 indexed message, uint64 sequence);
event Received(address, uint);
constructor(
uint chainId_,
bytes32 otherChainIds_,
IWormhole wormhole_,
uint8 commitmentLevel_,
IGasOracle gasOracle_
) GasUsage(gasOracle_) {
chainId = chainId_;
otherChainIds = otherChainIds_;
wormhole = wormhole_;
commitmentLevel = commitmentLevel_;
}
function sendMessage(bytes32 message) external payable {
require(uint8(message[0]) == chainId, "WormholeMessenger: wrong chainId");
require(otherChainIds[uint8(message[1])] != 0, "Messenger: wrong destination");
bytes32 messageWithSender = message.hashWithSenderAddress(msg.sender);
uint32 nonce_ = nonce;
uint64 sequence = wormhole.publishMessage(nonce_, abi.encodePacked(messageWithSender), commitmentLevel);
unchecked {
nonce = nonce_ + 1;
}
require(sentMessages[messageWithSender] == 0, "WormholeMessenger: has message");
sentMessages[messageWithSender] = 1;
emit MessageSent(messageWithSender, sequence);
}
function receiveMessage(bytes memory encodedMsg) external {
(IWormhole.VM memory vm, bool valid, string memory reason) = wormhole.parseAndVerifyVM(encodedMsg);
require(valid, reason);
require(vm.payload.length == 32, "WormholeMessenger: wrong length");
bytes32 messageWithSender = bytes32(vm.payload);
require(uint8(messageWithSender[1]) == chainId, "WormholeMessenger: wrong chainId");
require(otherWormholeMessengers[vm.emitterChainId] == vm.emitterAddress, "WormholeMessenger: wrong emitter");
receivedMessages[messageWithSender] = 1;
emit MessageReceived(messageWithSender, vm.sequence);
}
function setCommitmentLevel(uint8 value) external onlyOwner {
commitmentLevel = value;
}
function setOtherChainIds(bytes32 value) external onlyOwner {
otherChainIds = value;
}
function registerWormholeMessenger(uint16 chainId_, bytes32 address_) external onlyOwner {
otherWormholeMessengers[chainId_] = address_;
}
function withdrawGasTokens(uint amount) external onlyOwner {
payable(msg.sender).transfer(amount);
}
fallback() external payable {
revert("Unsupported");
}
receive() external payable {
emit Received(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
{
"compilationTarget": {
"contracts/Bridge.sol": "Bridge"
},
"evmVersion": "paris",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 1000
},
"remappings": []
}
[{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"uint256","name":"chainPrecision_","type":"uint256"},{"internalType":"contract Messenger","name":"allbridgeMessenger_","type":"address"},{"internalType":"contract WormholeMessenger","name":"wormholeMessenger_","type":"address"},{"internalType":"contract IGasOracle","name":"gasOracle_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"gas","type":"uint256"}],"name":"BridgingFeeFromTokens","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"bridgeTransactionCost","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"messageTransactionCost","type":"uint256"}],"name":"ReceiveFee","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Received","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"bytes32","name":"sendToken","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"sendAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"receiveAmount","type":"uint256"}],"name":"Swapped","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"recipient","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":false,"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"},{"indexed":false,"internalType":"bytes32","name":"message","type":"bytes32"}],"name":"TokensReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"recipient","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":false,"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"}],"name":"TokensSent","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"bytes32","name":"tokenAddress","type":"bytes32"}],"name":"addBridgeToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract Pool","name":"pool","type":"address"},{"internalType":"bytes32","name":"token","type":"bytes32"}],"name":"addPool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"canSwap","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"chainId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"gasUsage","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"},{"internalType":"address","name":"tokenAddress","type":"address"}],"name":"getBridgingCostInTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"protocol","type":"uint8"}],"name":"getMessageCost","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"protocol","type":"uint8"}],"name":"getMessageGasUsage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"getTransactionCost","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"message","type":"bytes32"},{"internalType":"enum MessengerProtocol","name":"protocol","type":"uint8"}],"name":"hasReceivedMessage","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"message","type":"bytes32"}],"name":"hasSentMessage","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"recipient","type":"bytes32"},{"internalType":"uint256","name":"sourceChainId","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"}],"name":"hashMessage","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"bytes32","name":"tokenAddress","type":"bytes32"}],"name":"otherBridgeTokens","outputs":[{"internalType":"bool","name":"isSupported","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"otherBridges","outputs":[{"internalType":"bytes32","name":"bridgeAddress","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"tokenId","type":"bytes32"}],"name":"pools","outputs":[{"internalType":"contract Pool","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"messageHash","type":"bytes32"}],"name":"processedMessages","outputs":[{"internalType":"uint256","name":"isProcessed","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"recipient","type":"bytes32"},{"internalType":"uint256","name":"sourceChainId","type":"uint256"},{"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"},{"internalType":"uint256","name":"receiveAmountMin","type":"uint256"}],"name":"receiveTokens","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"bytes32","name":"bridgeAddress","type":"bytes32"}],"name":"registerBridge","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"bytes32","name":"tokenAddress","type":"bytes32"}],"name":"removeBridgeToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"messageHash","type":"bytes32"}],"name":"sentMessages","outputs":[{"internalType":"uint256","name":"isSent","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract Messenger","name":"allbridgeMessenger_","type":"address"}],"name":"setAllbridgeMessenger","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IGasOracle","name":"gasOracle_","type":"address"}],"name":"setGasOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"gasAmount","type":"uint256"}],"name":"setGasUsage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"rebalancer_","type":"address"}],"name":"setRebalancer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"stopAuthority_","type":"address"}],"name":"setStopAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract WormholeMessenger","name":"wormholeMessenger_","type":"address"}],"name":"setWormholeMessenger","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startSwap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stopSwap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"token","type":"bytes32"},{"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"receiveAmountMin","type":"uint256"}],"name":"swap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"token","type":"bytes32"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"recipient","type":"bytes32"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bytes32","name":"receiveToken","type":"bytes32"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"enum MessengerProtocol","name":"messenger","type":"uint8"},{"internalType":"uint256","name":"feeTokenAmount","type":"uint256"}],"name":"swapAndBridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"withdrawBridgingFeeInTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawGasTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]