/*
 * ABDK Math 64.64 Smart Contract Library.  Copyright © 2019 by ABDK Consulting.
 * Author: Mikhail Vladimirov <mikhail.vladimirov@gmail.com>
 */
pragma solidity ^0.5.0 || ^0.6.0;

/**
 * Smart contract library of mathematical functions operating with signed
 * 64.64-bit fixed point numbers.  Signed 64.64-bit fixed point number is
 * basically a simple fraction whose numerator is signed 128-bit integer and
 * denominator is 2^64.  As long as denominator is always the same, there is no
 * need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
 * represented by int128 type holding only the numerator.
 */
library ABDKMath64x64 {
  /**
   * Minimum value signed 64.64-bit fixed point number may have. 
   */
  int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;

  /**
   * Maximum value signed 64.64-bit fixed point number may have. 
   */
  int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;

  /**
   * Convert signed 256-bit integer number into signed 64.64-bit fixed point
   * number.  Revert on overflow.
   *
   * @param x signed 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function fromInt (int256 x) internal pure returns (int128) {
    require (x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
    return int128 (x << 64);
  }

  /**
   * Convert signed 64.64 fixed point number into signed 64-bit integer number
   * rounding down.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64-bit integer number
   */
  function toInt (int128 x) internal pure returns (int64) {
    return int64 (x >> 64);
  }

  /**
   * Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
   * number.  Revert on overflow.
   *
   * @param x unsigned 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function fromUInt (uint256 x) internal pure returns (int128) {
    require (x <= 0x7FFFFFFFFFFFFFFF);
    return int128 (x << 64);
  }

  /**
   * Convert signed 64.64 fixed point number into unsigned 64-bit integer
   * number rounding down.  Revert on underflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return unsigned 64-bit integer number
   */
  function toUInt (int128 x) internal pure returns (uint64) {
    require (x >= 0);
    return uint64 (x >> 64);
  }

  /**
   * Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
   * number rounding down.  Revert on overflow.
   *
   * @param x signed 128.128-bin fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function from128x128 (int256 x) internal pure returns (int128) {
    int256 result = x >> 64;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Convert signed 64.64 fixed point number into signed 128.128 fixed point
   * number.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 128.128 fixed point number
   */
  function to128x128 (int128 x) internal pure returns (int256) {
    return int256 (x) << 64;
  }

  /**
   * Calculate x + y.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function add (int128 x, int128 y) internal pure returns (int128) {
    int256 result = int256(x) + y;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Calculate x - y.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function sub (int128 x, int128 y) internal pure returns (int128) {
    int256 result = int256(x) - y;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Calculate x * y rounding down.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function mul (int128 x, int128 y) internal pure returns (int128) {
    int256 result = int256(x) * y >> 64;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
   * number and y is signed 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64 fixed point number
   * @param y signed 256-bit integer number
   * @return signed 256-bit integer number
   */
  function muli (int128 x, int256 y) internal pure returns (int256) {
    if (x == MIN_64x64) {
      require (y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
        y <= 0x1000000000000000000000000000000000000000000000000);
      return -y << 63;
    } else {
      bool negativeResult = false;
      if (x < 0) {
        x = -x;
        negativeResult = true;
      }
      if (y < 0) {
        y = -y; // We rely on overflow behavior here
        negativeResult = !negativeResult;
      }
      uint256 absoluteResult = mulu (x, uint256 (y));
      if (negativeResult) {
        require (absoluteResult <=
          0x8000000000000000000000000000000000000000000000000000000000000000);
        return -int256 (absoluteResult); // We rely on overflow behavior here
      } else {
        require (absoluteResult <=
          0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
        return int256 (absoluteResult);
      }
    }
  }

  /**
   * Calculate x * y rounding down, where x is signed 64.64 fixed point number
   * and y is unsigned 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64 fixed point number
   * @param y unsigned 256-bit integer number
   * @return unsigned 256-bit integer number
   */
  function mulu (int128 x, uint256 y) internal pure returns (uint256) {
    if (y == 0) return 0;

    require (x >= 0);

    uint256 lo = (uint256 (x) * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
    uint256 hi = uint256 (x) * (y >> 128);

    require (hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
    hi <<= 64;

    require (hi <=
      0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF - lo);
    return hi + lo;
  }

  /**
   * Calculate x / y rounding towards zero.  Revert on overflow or when y is
   * zero.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function div (int128 x, int128 y) internal pure returns (int128) {
    require (y != 0);
    int256 result = (int256 (x) << 64) / y;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are signed 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x signed 256-bit integer number
   * @param y signed 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function divi (int256 x, int256 y) internal pure returns (int128) {
    require (y != 0);

    bool negativeResult = false;
    if (x < 0) {
      x = -x; // We rely on overflow behavior here
      negativeResult = true;
    }
    if (y < 0) {
      y = -y; // We rely on overflow behavior here
      negativeResult = !negativeResult;
    }
    uint128 absoluteResult = divuu (uint256 (x), uint256 (y));
    if (negativeResult) {
      require (absoluteResult <= 0x80000000000000000000000000000000);
      return -int128 (absoluteResult); // We rely on overflow behavior here
    } else {
      require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
      return int128 (absoluteResult); // We rely on overflow behavior here
    }
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x unsigned 256-bit integer number
   * @param y unsigned 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function divu (uint256 x, uint256 y) internal pure returns (int128) {
    require (y != 0);
    uint128 result = divuu (x, y);
    require (result <= uint128 (MAX_64x64));
    return int128 (result);
  }

  /**
   * Calculate -x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function neg (int128 x) internal pure returns (int128) {
    require (x != MIN_64x64);
    return -x;
  }

  /**
   * Calculate |x|.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function abs (int128 x) internal pure returns (int128) {
    require (x != MIN_64x64);
    return x < 0 ? -x : x;
  }

  /**
   * Calculate 1 / x rounding towards zero.  Revert on overflow or when x is
   * zero.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function inv (int128 x) internal pure returns (int128) {
    require (x != 0);
    int256 result = int256 (0x100000000000000000000000000000000) / x;
    require (result >= MIN_64x64 && result <= MAX_64x64);
    return int128 (result);
  }

  /**
   * Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function avg (int128 x, int128 y) internal pure returns (int128) {
    return int128 ((int256 (x) + int256 (y)) >> 1);
  }

  /**
   * Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
   * Revert on overflow or in case x * y is negative.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function gavg (int128 x, int128 y) internal pure returns (int128) {
    int256 m = int256 (x) * int256 (y);
    require (m >= 0);
    require (m <
        0x4000000000000000000000000000000000000000000000000000000000000000);
    return int128 (sqrtu (uint256 (m), uint256 (x) + uint256 (y) >> 1));
  }

  /**
   * Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
   * and y is unsigned 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y uint256 value
   * @return signed 64.64-bit fixed point number
   */
  function pow (int128 x, uint256 y) internal pure returns (int128) {
    uint256 absoluteResult;
    bool negativeResult = false;
    if (x >= 0) {
      absoluteResult = powu (uint256 (x) << 63, y);
    } else {
      // We rely on overflow behavior here
      absoluteResult = powu (uint256 (uint128 (-x)) << 63, y);
      negativeResult = y & 1 > 0;
    }

    absoluteResult >>= 63;

    if (negativeResult) {
      require (absoluteResult <= 0x80000000000000000000000000000000);
      return -int128 (absoluteResult); // We rely on overflow behavior here
    } else {
      require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
      return int128 (absoluteResult); // We rely on overflow behavior here
    }
  }

  /**
   * Calculate sqrt (x) rounding down.  Revert if x < 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function sqrt (int128 x) internal pure returns (int128) {
    require (x >= 0);
    return int128 (sqrtu (uint256 (x) << 64, 0x10000000000000000));
  }

  /**
   * Calculate binary logarithm of x.  Revert if x <= 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function log_2 (int128 x) internal pure returns (int128) {
    require (x > 0);

    int256 msb = 0;
    int256 xc = x;
    if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
    if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
    if (xc >= 0x10000) { xc >>= 16; msb += 16; }
    if (xc >= 0x100) { xc >>= 8; msb += 8; }
    if (xc >= 0x10) { xc >>= 4; msb += 4; }
    if (xc >= 0x4) { xc >>= 2; msb += 2; }
    if (xc >= 0x2) msb += 1;  // No need to shift xc anymore

    int256 result = msb - 64 << 64;
    uint256 ux = uint256 (x) << 127 - msb;
    for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
      ux *= ux;
      uint256 b = ux >> 255;
      ux >>= 127 + b;
      result += bit * int256 (b);
    }

    return int128 (result);
  }

  /**
   * Calculate natural logarithm of x.  Revert if x <= 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function ln (int128 x) internal pure returns (int128) {
    require (x > 0);

    return int128 (
        uint256 (log_2 (x)) * 0xB17217F7D1CF79ABC9E3B39803F2F6AF >> 128);
  }

  /**
   * Calculate binary exponent of x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function exp_2 (int128 x) internal pure returns (int128) {
    require (x < 0x400000000000000000); // Overflow

    if (x < -0x400000000000000000) return 0; // Underflow

    uint256 result = 0x80000000000000000000000000000000;

    if (x & 0x8000000000000000 > 0)
      result = result * 0x16A09E667F3BCC908B2FB1366EA957D3E >> 128;
    if (x & 0x4000000000000000 > 0)
      result = result * 0x1306FE0A31B7152DE8D5A46305C85EDEC >> 128;
    if (x & 0x2000000000000000 > 0)
      result = result * 0x1172B83C7D517ADCDF7C8C50EB14A791F >> 128;
    if (x & 0x1000000000000000 > 0)
      result = result * 0x10B5586CF9890F6298B92B71842A98363 >> 128;
    if (x & 0x800000000000000 > 0)
      result = result * 0x1059B0D31585743AE7C548EB68CA417FD >> 128;
    if (x & 0x400000000000000 > 0)
      result = result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8 >> 128;
    if (x & 0x200000000000000 > 0)
      result = result * 0x10163DA9FB33356D84A66AE336DCDFA3F >> 128;
    if (x & 0x100000000000000 > 0)
      result = result * 0x100B1AFA5ABCBED6129AB13EC11DC9543 >> 128;
    if (x & 0x80000000000000 > 0)
      result = result * 0x10058C86DA1C09EA1FF19D294CF2F679B >> 128;
    if (x & 0x40000000000000 > 0)
      result = result * 0x1002C605E2E8CEC506D21BFC89A23A00F >> 128;
    if (x & 0x20000000000000 > 0)
      result = result * 0x100162F3904051FA128BCA9C55C31E5DF >> 128;
    if (x & 0x10000000000000 > 0)
      result = result * 0x1000B175EFFDC76BA38E31671CA939725 >> 128;
    if (x & 0x8000000000000 > 0)
      result = result * 0x100058BA01FB9F96D6CACD4B180917C3D >> 128;
    if (x & 0x4000000000000 > 0)
      result = result * 0x10002C5CC37DA9491D0985C348C68E7B3 >> 128;
    if (x & 0x2000000000000 > 0)
      result = result * 0x1000162E525EE054754457D5995292026 >> 128;
    if (x & 0x1000000000000 > 0)
      result = result * 0x10000B17255775C040618BF4A4ADE83FC >> 128;
    if (x & 0x800000000000 > 0)
      result = result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB >> 128;
    if (x & 0x400000000000 > 0)
      result = result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9 >> 128;
    if (x & 0x200000000000 > 0)
      result = result * 0x10000162E43F4F831060E02D839A9D16D >> 128;
    if (x & 0x100000000000 > 0)
      result = result * 0x100000B1721BCFC99D9F890EA06911763 >> 128;
    if (x & 0x80000000000 > 0)
      result = result * 0x10000058B90CF1E6D97F9CA14DBCC1628 >> 128;
    if (x & 0x40000000000 > 0)
      result = result * 0x1000002C5C863B73F016468F6BAC5CA2B >> 128;
    if (x & 0x20000000000 > 0)
      result = result * 0x100000162E430E5A18F6119E3C02282A5 >> 128;
    if (x & 0x10000000000 > 0)
      result = result * 0x1000000B1721835514B86E6D96EFD1BFE >> 128;
    if (x & 0x8000000000 > 0)
      result = result * 0x100000058B90C0B48C6BE5DF846C5B2EF >> 128;
    if (x & 0x4000000000 > 0)
      result = result * 0x10000002C5C8601CC6B9E94213C72737A >> 128;
    if (x & 0x2000000000 > 0)
      result = result * 0x1000000162E42FFF037DF38AA2B219F06 >> 128;
    if (x & 0x1000000000 > 0)
      result = result * 0x10000000B17217FBA9C739AA5819F44F9 >> 128;
    if (x & 0x800000000 > 0)
      result = result * 0x1000000058B90BFCDEE5ACD3C1CEDC823 >> 128;
    if (x & 0x400000000 > 0)
      result = result * 0x100000002C5C85FE31F35A6A30DA1BE50 >> 128;
    if (x & 0x200000000 > 0)
      result = result * 0x10000000162E42FF0999CE3541B9FFFCF >> 128;
    if (x & 0x100000000 > 0)
      result = result * 0x100000000B17217F80F4EF5AADDA45554 >> 128;
    if (x & 0x80000000 > 0)
      result = result * 0x10000000058B90BFBF8479BD5A81B51AD >> 128;
    if (x & 0x40000000 > 0)
      result = result * 0x1000000002C5C85FDF84BD62AE30A74CC >> 128;
    if (x & 0x20000000 > 0)
      result = result * 0x100000000162E42FEFB2FED257559BDAA >> 128;
    if (x & 0x10000000 > 0)
      result = result * 0x1000000000B17217F7D5A7716BBA4A9AE >> 128;
    if (x & 0x8000000 > 0)
      result = result * 0x100000000058B90BFBE9DDBAC5E109CCE >> 128;
    if (x & 0x4000000 > 0)
      result = result * 0x10000000002C5C85FDF4B15DE6F17EB0D >> 128;
    if (x & 0x2000000 > 0)
      result = result * 0x1000000000162E42FEFA494F1478FDE05 >> 128;
    if (x & 0x1000000 > 0)
      result = result * 0x10000000000B17217F7D20CF927C8E94C >> 128;
    if (x & 0x800000 > 0)
      result = result * 0x1000000000058B90BFBE8F71CB4E4B33D >> 128;
    if (x & 0x400000 > 0)
      result = result * 0x100000000002C5C85FDF477B662B26945 >> 128;
    if (x & 0x200000 > 0)
      result = result * 0x10000000000162E42FEFA3AE53369388C >> 128;
    if (x & 0x100000 > 0)
      result = result * 0x100000000000B17217F7D1D351A389D40 >> 128;
    if (x & 0x80000 > 0)
      result = result * 0x10000000000058B90BFBE8E8B2D3D4EDE >> 128;
    if (x & 0x40000 > 0)
      result = result * 0x1000000000002C5C85FDF4741BEA6E77E >> 128;
    if (x & 0x20000 > 0)
      result = result * 0x100000000000162E42FEFA39FE95583C2 >> 128;
    if (x & 0x10000 > 0)
      result = result * 0x1000000000000B17217F7D1CFB72B45E1 >> 128;
    if (x & 0x8000 > 0)
      result = result * 0x100000000000058B90BFBE8E7CC35C3F0 >> 128;
    if (x & 0x4000 > 0)
      result = result * 0x10000000000002C5C85FDF473E242EA38 >> 128;
    if (x & 0x2000 > 0)
      result = result * 0x1000000000000162E42FEFA39F02B772C >> 128;
    if (x & 0x1000 > 0)
      result = result * 0x10000000000000B17217F7D1CF7D83C1A >> 128;
    if (x & 0x800 > 0)
      result = result * 0x1000000000000058B90BFBE8E7BDCBE2E >> 128;
    if (x & 0x400 > 0)
      result = result * 0x100000000000002C5C85FDF473DEA871F >> 128;
    if (x & 0x200 > 0)
      result = result * 0x10000000000000162E42FEFA39EF44D91 >> 128;
    if (x & 0x100 > 0)
      result = result * 0x100000000000000B17217F7D1CF79E949 >> 128;
    if (x & 0x80 > 0)
      result = result * 0x10000000000000058B90BFBE8E7BCE544 >> 128;
    if (x & 0x40 > 0)
      result = result * 0x1000000000000002C5C85FDF473DE6ECA >> 128;
    if (x & 0x20 > 0)
      result = result * 0x100000000000000162E42FEFA39EF366F >> 128;
    if (x & 0x10 > 0)
      result = result * 0x1000000000000000B17217F7D1CF79AFA >> 128;
    if (x & 0x8 > 0)
      result = result * 0x100000000000000058B90BFBE8E7BCD6D >> 128;
    if (x & 0x4 > 0)
      result = result * 0x10000000000000002C5C85FDF473DE6B2 >> 128;
    if (x & 0x2 > 0)
      result = result * 0x1000000000000000162E42FEFA39EF358 >> 128;
    if (x & 0x1 > 0)
      result = result * 0x10000000000000000B17217F7D1CF79AB >> 128;

    result >>= 63 - (x >> 64);
    require (result <= uint256 (MAX_64x64));

    return int128 (result);
  }

  /**
   * Calculate natural exponent of x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function exp (int128 x) internal pure returns (int128) {
    require (x < 0x400000000000000000); // Overflow

    if (x < -0x400000000000000000) return 0; // Underflow

    return exp_2 (
        int128 (int256 (x) * 0x171547652B82FE1777D0FFDA0D23A7D12 >> 128));
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x unsigned 256-bit integer number
   * @param y unsigned 256-bit integer number
   * @return unsigned 64.64-bit fixed point number
   */
  function divuu (uint256 x, uint256 y) private pure returns (uint128) {
    require (y != 0);

    uint256 result;

    if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
      result = (x << 64) / y;
    else {
      uint256 msb = 192;
      uint256 xc = x >> 192;
      if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
      if (xc >= 0x10000) { xc >>= 16; msb += 16; }
      if (xc >= 0x100) { xc >>= 8; msb += 8; }
      if (xc >= 0x10) { xc >>= 4; msb += 4; }
      if (xc >= 0x4) { xc >>= 2; msb += 2; }
      if (xc >= 0x2) msb += 1;  // No need to shift xc anymore

      result = (x << 255 - msb) / ((y - 1 >> msb - 191) + 1);
      require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);

      uint256 hi = result * (y >> 128);
      uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);

      uint256 xh = x >> 192;
      uint256 xl = x << 64;

      if (xl < lo) xh -= 1;
      xl -= lo; // We rely on overflow behavior here
      lo = hi << 128;
      if (xl < lo) xh -= 1;
      xl -= lo; // We rely on overflow behavior here

      assert (xh == hi >> 128);

      result += xl / y;
    }

    require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
    return uint128 (result);
  }

  /**
   * Calculate x^y assuming 0^0 is 1, where x is unsigned 129.127 fixed point
   * number and y is unsigned 256-bit integer number.  Revert on overflow.
   *
   * @param x unsigned 129.127-bit fixed point number
   * @param y uint256 value
   * @return unsigned 129.127-bit fixed point number
   */
  function powu (uint256 x, uint256 y) private pure returns (uint256) {
    if (y == 0) return 0x80000000000000000000000000000000;
    else if (x == 0) return 0;
    else {
      int256 msb = 0;
      uint256 xc = x;
      if (xc >= 0x100000000000000000000000000000000) { xc >>= 128; msb += 128; }
      if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
      if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
      if (xc >= 0x10000) { xc >>= 16; msb += 16; }
      if (xc >= 0x100) { xc >>= 8; msb += 8; }
      if (xc >= 0x10) { xc >>= 4; msb += 4; }
      if (xc >= 0x4) { xc >>= 2; msb += 2; }
      if (xc >= 0x2) msb += 1;  // No need to shift xc anymore

      int256 xe = msb - 127;
      if (xe > 0) x >>= xe;
      else x <<= -xe;

      uint256 result = 0x80000000000000000000000000000000;
      int256 re = 0;

      while (y > 0) {
        if (y & 1 > 0) {
          result = result * x;
          y -= 1;
          re += xe;
          if (result >=
            0x8000000000000000000000000000000000000000000000000000000000000000) {
            result >>= 128;
            re += 1;
          } else result >>= 127;
          if (re < -127) return 0; // Underflow
          require (re < 128); // Overflow
        } else {
          x = x * x;
          y >>= 1;
          xe <<= 1;
          if (x >=
            0x8000000000000000000000000000000000000000000000000000000000000000) {
            x >>= 128;
            xe += 1;
          } else x >>= 127;
          if (xe < -127) return 0; // Underflow
          require (xe < 128); // Overflow
        }
      }

      if (re > 0) result <<= re;
      else if (re < 0) result >>= -re;

      return result;
    }
  }

  /**
   * Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
   * number.
   *
   * @param x unsigned 256-bit integer number
   * @return unsigned 128-bit integer number
   */
  function sqrtu (uint256 x, uint256 r) private pure returns (uint128) {
    if (x == 0) return 0;
    else {
      require (r > 0);
      while (true) {
        uint256 rr = x / r;
        if (r == rr || r + 1 == rr) return uint128 (r);
        else if (r == rr + 1) return uint128 (rr);
        r = r + rr + 1 >> 1;
      }
    }
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./Context.sol";
import "./IERC20.sol";
import "./SafeMath.sol";
import "./Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.12;

import "./ERC20.sol";
import "./Ownable.sol";
import { ABDKMath64x64 as Math } from "./ABDKMath64x64.sol";

contract Momentum is ERC20, Ownable {
    int128 shortMomentum;
    int128 longMomentum;
    int128 SMweight;
    int128 LMweightEx;
    int128 LMweightCo;

    mapping (address => mapping (address => uint256)) _allowances;

    bool isBurning = false;

    constructor(
        uint256 initialSupply, 
        uint256 _shortMomentumWeight,
        uint256 _LMweightEx,
        uint256 _LMweightCo,
        uint256 factor,
        uint256 _shortMomentum, 
        uint256 _longMomentum
    ) public ERC20("Momentum", "XMM") {
        _setupDecimals(10);
        _mint(_msgSender(), initialSupply);
        SMweight = Math.divu(_shortMomentumWeight, factor);
        LMweightEx = Math.divu(_LMweightEx, factor);
        LMweightCo = Math.divu(_LMweightCo, factor);
        shortMomentum = Math.fromUInt(_shortMomentum);
        longMomentum = Math.fromUInt(_longMomentum);
    }

    function getShortMomentum() external view returns (uint256) {
        return Math.mulu(shortMomentum, 1);
    }

    function getLongMomentum() external view returns (uint256) {
        return Math.mulu(longMomentum, 1);
    }

    function getMomentumAndSupply() external view returns (uint256, uint256, uint256) {
        uint256 SM = Math.mulu(shortMomentum, 1);
        uint256 LM = Math.mulu(longMomentum, 1);
        return (SM, LM, totalSupply());
    }

    function getNewMomentum(int128 amount, int128 SMcopy, int128 LMcopy) internal view returns (int128, int128) {
        int128 LMweight = (amount < SMcopy) ? LMweightCo : LMweightEx;
        int128 LMnew = Math.add(LMcopy, Math.div(Math.sub(amount, LMcopy), LMweight));
        int128 SMnew = Math.add(SMcopy, Math.div(Math.sub(amount, SMcopy), SMweight));
        return (LMnew, SMnew);
    }

    function getRangeData(int128 LMcopy, int128 SMcopy, int128 LMnew, int128 SMnew) internal pure returns (int128, int128) {
        int128 range = Math.abs(Math.sub(LMcopy, SMcopy));
        int128 newRange = Math.abs(Math.sub(LMnew, SMnew));
        int128 rangeDelta = Math.sub(newRange, range);
        return (rangeDelta, newRange);
    }

    function getDestabilizingTransferFee(int128 amount, int128 newRange, int128 newLongMomentum) internal pure returns (int128) {
        // If newRange is within 2% of newLongMomentum, apply ~0.75% fee 
        // to avoid potential overflow calculations and negative log values
        if (newRange <= Math.div(newLongMomentum, Math.fromUInt(50))) {
            return Math.mul(amount, Math.div(Math.fromUInt(1), Math.fromUInt(133)));
        } else {
            int128 proportion = Math.div(newRange, newLongMomentum);
            int128 rate = Math.add(Math.fromUInt(1), Math.ln(Math.mul(proportion, Math.fromUInt(50))));
            return Math.mul(amount, Math.div(rate, Math.fromUInt(133)));
        }
    }

    function getTransferFee(uint256 amount256, int128 SMcopy, int128 LMcopy) internal returns (uint256) {
        int128 amount = Math.fromUInt(amount256);

        // Guard against flood of small transfers manipulating momentum values
        // If transfer size is less than ~0.3% of lower momentum value, charge 5% fee and skip momentum update
        if (SMcopy <= LMcopy) {
            if (amount < Math.div(SMcopy, Math.fromUInt(333))) {
                return Math.mulu(Math.div(amount, Math.fromUInt(20)), 1);
            }
        } else {
            if (amount < Math.div(LMcopy, Math.fromUInt(333))) {
                return Math.mulu(Math.div(amount, Math.fromUInt(20)), 1);
            }
        }
        
        (int128 newLongMomentum, int128 newShortMomentum) = getNewMomentum(amount, SMcopy, LMcopy);
        (int128 rangeDelta, int128 newRange) = getRangeData(LMcopy, SMcopy, newLongMomentum, newShortMomentum);

        int128 transferFee;

        if (rangeDelta < Math.fromUInt(0)) {
            transferFee = Math.div(amount, Math.fromUInt(133)); // stabilizing transfer ~0.75% fee
        } else {
            transferFee = getDestabilizingTransferFee(amount, newRange, newLongMomentum);
        }

        longMomentum = newLongMomentum;
        shortMomentum = newShortMomentum;

        return Math.mulu(transferFee, 1);
    }

    function startBurning() public onlyOwner {
        isBurning = true;
        renounceOwnership();
    }

    function burnAndTransfer(address sender, address recipient, uint256 amount256) internal {
        if (isBurning) {
            uint256 transferFee = getTransferFee(amount256, shortMomentum, longMomentum);
            uint256 adjustedAmount = amount256.sub(transferFee);
            _burn(sender, transferFee);
            _transfer(sender, recipient, adjustedAmount);
        } else {
            _transfer(sender, recipient, amount256);
        }
    }

    function transfer(address recipient, uint256 amount256) public override returns (bool) {
        burnAndTransfer(_msgSender(), recipient, amount256);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount256) public override returns (bool) {
        burnAndTransfer(sender, recipient, amount256);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount256, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function increaseAllowance(address spender, uint256 addedValue) public override returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue) public override returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    function _approve(address owner, address spender, uint256 amount) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "Momentum.sol": "Momentum"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}