HOLYTRINITY_KEY

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev The ETH balance of the account is not enough to perform the operation.
   */
  error AddressInsufficientBalance(address account);

  /**
   * @dev There's no code at `target` (it is not a contract).
   */
  error AddressEmptyCode(address target);

  /**
   * @dev A call to an address target failed. The target may have reverted.
   */
  error FailedInnerCall();

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions
   * pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    if (address(this).balance < amount) {
      revert AddressInsufficientBalance(address(this));
    }

    (bool success,) = recipient.call{ value: amount }("");
    if (!success) {
      revert FailedInnerCall();
    }
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason or custom error, it is bubbled
   * up by this function (like regular Solidity function calls). However, if
   * the call reverted with no returned reason, this function reverts with a
   * {FailedInnerCall} error.
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use
   * https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   */
  function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
    if (address(this).balance < value) {
      revert AddressInsufficientBalance(address(this));
    }
    (bool success, bytes memory returndata) = target.call{ value: value }(data);
    return verifyCallResultFromTarget(target, success, returndata);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   */
  function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
   * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
   * unsuccessful call.
   */
  function verifyCallResultFromTarget(address target, bool success, bytes memory returndata)
    internal
    view
    returns (bytes memory)
  {
    if (!success) {
      _revert(returndata);
    } else {
      // only check if target is a contract if the call was successful and the return data is empty
      // otherwise we already know that it was a contract
      if (returndata.length == 0 && target.code.length == 0) {
        revert AddressEmptyCode(target);
      }
      return returndata;
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
   * revert reason or with a default {FailedInnerCall} error.
   */
  function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
    if (!success) {
      _revert(returndata);
    } else {
      return returndata;
    }
  }

  /**
   * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
   */
  function _revert(bytes memory returndata) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert FailedInnerCall();
    }
  }
}

// SPDX-License-Identifier: MIT

// modified from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/structs/BitMaps.sol
pragma solidity ^0.8.20;

type BitMap256 is uint256;

using BitMaps for BitMap256 global;

library BitMaps {
  /**
   * @dev Returns whether the bit at `index` is set.
   */
  function get(BitMap256 bitmap, uint8 index) internal pure returns (bool) {
    uint256 mask = 1 << index;
    return BitMap256.unwrap(bitmap) & mask != 0;
  }

  /**
   * @dev Sets the bit at `index`.
   */
  function set(BitMap256 bitmap, uint8 index) internal pure returns (BitMap256) {
    uint256 mask = 1 << index;
    return BitMap256.wrap(BitMap256.unwrap(bitmap) | mask);
  }
}

// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <goncalo.sa@consensys.net>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;

library BytesLib {
  function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
    bytes memory tempBytes;

    assembly {
      // Get a location of some free memory and store it in tempBytes as
      // Solidity does for memory variables.
      tempBytes := mload(0x40)

      // Store the length of the first bytes array at the beginning of
      // the memory for tempBytes.
      let length := mload(_preBytes)
      mstore(tempBytes, length)

      // Maintain a memory counter for the current write location in the
      // temp bytes array by adding the 32 bytes for the array length to
      // the starting location.
      let mc := add(tempBytes, 0x20)
      // Stop copying when the memory counter reaches the length of the
      // first bytes array.
      let end := add(mc, length)

      for {
        // Initialize a copy counter to the start of the _preBytes data,
        // 32 bytes into its memory.
        let cc := add(_preBytes, 0x20)
      } lt(mc, end) {
        // Increase both counters by 32 bytes each iteration.
        mc := add(mc, 0x20)
        cc := add(cc, 0x20)
      } {
        // Write the _preBytes data into the tempBytes memory 32 bytes
        // at a time.
        mstore(mc, mload(cc))
      }

      // Add the length of _postBytes to the current length of tempBytes
      // and store it as the new length in the first 32 bytes of the
      // tempBytes memory.
      length := mload(_postBytes)
      mstore(tempBytes, add(length, mload(tempBytes)))

      // Move the memory counter back from a multiple of 0x20 to the
      // actual end of the _preBytes data.
      mc := end
      // Stop copying when the memory counter reaches the new combined
      // length of the arrays.
      end := add(mc, length)

      for { let cc := add(_postBytes, 0x20) } lt(mc, end) {
        mc := add(mc, 0x20)
        cc := add(cc, 0x20)
      } { mstore(mc, mload(cc)) }

      // Update the free-memory pointer by padding our last write location
      // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
      // next 32 byte block, then round down to the nearest multiple of
      // 32. If the sum of the length of the two arrays is zero then add
      // one before rounding down to leave a blank 32 bytes (the length block with 0).
      mstore(
        0x40,
        and(
          add(add(end, iszero(add(length, mload(_preBytes)))), 31),
          not(31) // Round down to the nearest 32 bytes.
        )
      )
    }

    return tempBytes;
  }

  function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
    assembly {
      // Read the first 32 bytes of _preBytes storage, which is the length
      // of the array. (We don't need to use the offset into the slot
      // because arrays use the entire slot.)
      let fslot := sload(_preBytes.slot)
      // Arrays of 31 bytes or less have an even value in their slot,
      // while longer arrays have an odd value. The actual length is
      // the slot divided by two for odd values, and the lowest order
      // byte divided by two for even values.
      // If the slot is even, bitwise and the slot with 255 and divide by
      // two to get the length. If the slot is odd, bitwise and the slot
      // with -1 and divide by two.
      let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
      let mlength := mload(_postBytes)
      let newlength := add(slength, mlength)
      // slength can contain both the length and contents of the array
      // if length < 32 bytes so let's prepare for that
      // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
      switch add(lt(slength, 32), lt(newlength, 32))
      case 2 {
        // Since the new array still fits in the slot, we just need to
        // update the contents of the slot.
        // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
        sstore(
          _preBytes.slot,
          // all the modifications to the slot are inside this
          // next block
          add(
            // we can just add to the slot contents because the
            // bytes we want to change are the LSBs
            fslot,
            add(
              mul(
                div(
                  // load the bytes from memory
                  mload(add(_postBytes, 0x20)),
                  // zero all bytes to the right
                  exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
              ),
              // increase length by the double of the memory
              // bytes length
              mul(mlength, 2)
            )
          )
        )
      }
      case 1 {
        // The stored value fits in the slot, but the combined value
        // will exceed it.
        // get the keccak hash to get the contents of the array
        mstore(0x0, _preBytes.slot)
        let sc := add(keccak256(0x0, 0x20), div(slength, 32))

        // save new length
        sstore(_preBytes.slot, add(mul(newlength, 2), 1))

        // The contents of the _postBytes array start 32 bytes into
        // the structure. Our first read should obtain the `submod`
        // bytes that can fit into the unused space in the last word
        // of the stored array. To get this, we read 32 bytes starting
        // from `submod`, so the data we read overlaps with the array
        // contents by `submod` bytes. Masking the lowest-order
        // `submod` bytes allows us to add that value directly to the
        // stored value.

        let submod := sub(32, slength)
        let mc := add(_postBytes, submod)
        let end := add(_postBytes, mlength)
        let mask := sub(exp(0x100, submod), 1)

        sstore(
          sc, add(and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00), and(mload(mc), mask))
        )

        for {
          mc := add(mc, 0x20)
          sc := add(sc, 1)
        } lt(mc, end) {
          sc := add(sc, 1)
          mc := add(mc, 0x20)
        } { sstore(sc, mload(mc)) }

        mask := exp(0x100, sub(mc, end))

        sstore(sc, mul(div(mload(mc), mask), mask))
      }
      default {
        // get the keccak hash to get the contents of the array
        mstore(0x0, _preBytes.slot)
        // Start copying to the last used word of the stored array.
        let sc := add(keccak256(0x0, 0x20), div(slength, 32))

        // save new length
        sstore(_preBytes.slot, add(mul(newlength, 2), 1))

        // Copy over the first `submod` bytes of the new data as in
        // case 1 above.
        let slengthmod := mod(slength, 32)
        let mlengthmod := mod(mlength, 32)
        let submod := sub(32, slengthmod)
        let mc := add(_postBytes, submod)
        let end := add(_postBytes, mlength)
        let mask := sub(exp(0x100, submod), 1)

        sstore(sc, add(sload(sc), and(mload(mc), mask)))

        for {
          sc := add(sc, 1)
          mc := add(mc, 0x20)
        } lt(mc, end) {
          sc := add(sc, 1)
          mc := add(mc, 0x20)
        } { sstore(sc, mload(mc)) }

        mask := exp(0x100, sub(mc, end))

        sstore(sc, mul(div(mload(mc), mask), mask))
      }
    }
  }

  function slice(bytes memory _bytes, uint256 _start, uint256 _length) internal pure returns (bytes memory) {
    require(_length + 31 >= _length, "slice_overflow");
    require(_bytes.length >= _start + _length, "slice_outOfBounds");

    bytes memory tempBytes;

    assembly {
      switch iszero(_length)
      case 0 {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
        tempBytes := mload(0x40)

        // The first word of the slice result is potentially a partial
        // word read from the original array. To read it, we calculate
        // the length of that partial word and start copying that many
        // bytes into the array. The first word we copy will start with
        // data we don't care about, but the last `lengthmod` bytes will
        // land at the beginning of the contents of the new array. When
        // we're done copying, we overwrite the full first word with
        // the actual length of the slice.
        let lengthmod := and(_length, 31)

        // The multiplication in the next line is necessary
        // because when slicing multiples of 32 bytes (lengthmod == 0)
        // the following copy loop was copying the origin's length
        // and then ending prematurely not copying everything it should.
        let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
        let end := add(mc, _length)

        for {
          // The multiplication in the next line has the same exact purpose
          // as the one above.
          let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
        } lt(mc, end) {
          mc := add(mc, 0x20)
          cc := add(cc, 0x20)
        } { mstore(mc, mload(cc)) }

        mstore(tempBytes, _length)

        //update free-memory pointer
        //allocating the array padded to 32 bytes like the compiler does now
        mstore(0x40, and(add(mc, 31), not(31)))
      }
      //if we want a zero-length slice let's just return a zero-length array
      default {
        tempBytes := mload(0x40)
        //zero out the 32 bytes slice we are about to return
        //we need to do it because Solidity does not garbage collect
        mstore(tempBytes, 0)

        mstore(0x40, add(tempBytes, 0x20))
      }
    }

    return tempBytes;
  }

  function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
    require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
    address tempAddress;

    assembly {
      tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
    }

    return tempAddress;
  }

  function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
    require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
    uint8 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x1), _start))
    }

    return tempUint;
  }

  function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
    require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
    uint16 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x2), _start))
    }

    return tempUint;
  }

  function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
    require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
    uint32 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x4), _start))
    }

    return tempUint;
  }

  function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
    require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
    uint64 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x8), _start))
    }

    return tempUint;
  }

  function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
    require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
    uint96 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0xc), _start))
    }

    return tempUint;
  }

  function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
    require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
    uint128 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x10), _start))
    }

    return tempUint;
  }

  function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
    require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
    uint256 tempUint;

    assembly {
      tempUint := mload(add(add(_bytes, 0x20), _start))
    }

    return tempUint;
  }

  function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
    require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
    bytes32 tempBytes32;

    assembly {
      tempBytes32 := mload(add(add(_bytes, 0x20), _start))
    }

    return tempBytes32;
  }

  function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
    bool success = true;

    assembly {
      let length := mload(_preBytes)

      // if lengths don't match the arrays are not equal
      switch eq(length, mload(_postBytes))
      case 1 {
        // cb is a circuit breaker in the for loop since there's
        //  no said feature for inline assembly loops
        // cb = 1 - don't breaker
        // cb = 0 - break
        let cb := 1

        let mc := add(_preBytes, 0x20)
        let end := add(mc, length)

        for { let cc := add(_postBytes, 0x20) }
        // the next line is the loop condition:
        // while(uint256(mc < end) + cb == 2)
        eq(add(lt(mc, end), cb), 2) {
          mc := add(mc, 0x20)
          cc := add(cc, 0x20)
        } {
          // if any of these checks fails then arrays are not equal
          if iszero(eq(mload(mc), mload(cc))) {
            // unsuccess:
            success := 0
            cb := 0
          }
        }
      }
      default {
        // unsuccess:
        success := 0
      }
    }

    return success;
  }

  function equal_nonAligned(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
    bool success = true;

    assembly {
      let length := mload(_preBytes)

      // if lengths don't match the arrays are not equal
      switch eq(length, mload(_postBytes))
      case 1 {
        // cb is a circuit breaker in the for loop since there's
        //  no said feature for inline assembly loops
        // cb = 1 - don't breaker
        // cb = 0 - break
        let cb := 1

        let endMinusWord := add(_preBytes, length)
        let mc := add(_preBytes, 0x20)
        let cc := add(_postBytes, 0x20)

        for {
          // the next line is the loop condition:
          // while(uint256(mc < endWord) + cb == 2)
        } eq(add(lt(mc, endMinusWord), cb), 2) {
          mc := add(mc, 0x20)
          cc := add(cc, 0x20)
        } {
          // if any of these checks fails then arrays are not equal
          if iszero(eq(mload(mc), mload(cc))) {
            // unsuccess:
            success := 0
            cb := 0
          }
        }

        // Only if still successful
        // For <1 word tail bytes
        if gt(success, 0) {
          // Get the remainder of length/32
          // length % 32 = AND(length, 32 - 1)
          let numTailBytes := and(length, 0x1f)
          let mcRem := mload(mc)
          let ccRem := mload(cc)
          for { let i := 0 }
          // the next line is the loop condition:
          // while(uint256(i < numTailBytes) + cb == 2)
          eq(add(lt(i, numTailBytes), cb), 2) { i := add(i, 1) } {
            if iszero(eq(byte(i, mcRem), byte(i, ccRem))) {
              // unsuccess:
              success := 0
              cb := 0
            }
          }
        }
      }
      default {
        // unsuccess:
        success := 0
      }
    }

    return success;
  }

  function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
    bool success = true;

    assembly {
      // we know _preBytes_offset is 0
      let fslot := sload(_preBytes.slot)
      // Decode the length of the stored array like in concatStorage().
      let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
      let mlength := mload(_postBytes)

      // if lengths don't match the arrays are not equal
      switch eq(slength, mlength)
      case 1 {
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
        if iszero(iszero(slength)) {
          switch lt(slength, 32)
          case 1 {
            // blank the last byte which is the length
            fslot := mul(div(fslot, 0x100), 0x100)

            if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
              // unsuccess:
              success := 0
            }
          }
          default {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
            let cb := 1

            // get the keccak hash to get the contents of the array
            mstore(0x0, _preBytes.slot)
            let sc := keccak256(0x0, 0x20)

            let mc := add(_postBytes, 0x20)
            let end := add(mc, mlength)

            // the next line is the loop condition:
            // while(uint256(mc < end) + cb == 2)
            for { } eq(add(lt(mc, end), cb), 2) {
              sc := add(sc, 1)
              mc := add(mc, 0x20)
            } {
              if iszero(eq(sload(sc), mload(mc))) {
                // unsuccess:
                success := 0
                cb := 0
              }
            }
          }
        }
      }
      default {
        // unsuccess:
        success := 0
      }
    }

    return success;
  }
}

// SPDX-License-Identifier: LZBL-1.2

pragma solidity ^0.8.20;

library CalldataBytesLib {
  function toU8(bytes calldata _bytes, uint256 _start) internal pure returns (uint8) {
    return uint8(_bytes[_start]);
  }

  function toU16(bytes calldata _bytes, uint256 _start) internal pure returns (uint16) {
    unchecked {
      uint256 end = _start + 2;
      return uint16(bytes2(_bytes[_start:end]));
    }
  }

  function toU32(bytes calldata _bytes, uint256 _start) internal pure returns (uint32) {
    unchecked {
      uint256 end = _start + 4;
      return uint32(bytes4(_bytes[_start:end]));
    }
  }

  function toU64(bytes calldata _bytes, uint256 _start) internal pure returns (uint64) {
    unchecked {
      uint256 end = _start + 8;
      return uint64(bytes8(_bytes[_start:end]));
    }
  }

  function toU128(bytes calldata _bytes, uint256 _start) internal pure returns (uint128) {
    unchecked {
      uint256 end = _start + 16;
      return uint128(bytes16(_bytes[_start:end]));
    }
  }

  function toU256(bytes calldata _bytes, uint256 _start) internal pure returns (uint256) {
    unchecked {
      uint256 end = _start + 32;
      return uint256(bytes32(_bytes[_start:end]));
    }
  }

  function toAddr(bytes calldata _bytes, uint256 _start) internal pure returns (address) {
    unchecked {
      uint256 end = _start + 20;
      return address(bytes20(_bytes[_start:end]));
    }
  }

  function toB32(bytes calldata _bytes, uint256 _start) internal pure returns (bytes32) {
    unchecked {
      uint256 end = _start + 32;
      return bytes32(_bytes[_start:end]);
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }

  function _contextSuffixLength() internal view virtual returns (uint256) {
    return 0;
  }
}

// SPDX-License-Identifier: LZBL-1.2

pragma solidity ^0.8.20;

import { BytesLib } from "solidity-bytes-utils/contracts/BytesLib.sol";

import { BitMap256 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/BitMaps.sol";
import { CalldataBytesLib } from "@layerzerolabs/lz-evm-protocol-v2/contracts/libs/CalldataBytesLib.sol";

library DVNOptions {
  using CalldataBytesLib for bytes;
  using BytesLib for bytes;

  uint8 internal constant WORKER_ID = 2;
  uint8 internal constant OPTION_TYPE_PRECRIME = 1;

  error DVN_InvalidDVNIdx();
  error DVN_InvalidDVNOptions(uint256 cursor);

  /// @dev group dvn options by its idx
  /// @param _options [dvn_id][dvn_option][dvn_id][dvn_option]...
  ///        dvn_option = [option_size][dvn_idx][option_type][option]
  ///        option_size = len(dvn_idx) + len(option_type) + len(option)
  ///        dvn_id: uint8, dvn_idx: uint8, option_size: uint16, option_type: uint8, option: bytes
  /// @return dvnOptions the grouped options, still share the same format of _options
  /// @return dvnIndices the dvn indices
  function groupDVNOptionsByIdx(bytes memory _options)
    internal
    pure
    returns (bytes[] memory dvnOptions, uint8[] memory dvnIndices)
  {
    if (_options.length == 0) return (dvnOptions, dvnIndices);

    uint8 numDVNs = getNumDVNs(_options);

    // if there is only 1 dvn, we can just return the whole options
    if (numDVNs == 1) {
      dvnOptions = new bytes[](1);
      dvnOptions[0] = _options;

      dvnIndices = new uint8[](1);
      dvnIndices[0] = _options.toUint8(3); // dvn idx
      return (dvnOptions, dvnIndices);
    }

    // otherwise, we need to group the options by dvn_idx
    dvnIndices = new uint8[](numDVNs);
    dvnOptions = new bytes[](numDVNs);
    unchecked {
      uint256 cursor = 0;
      uint256 start = 0;
      uint8 lastDVNIdx = 255; // 255 is an invalid dvn_idx

      while (cursor < _options.length) {
        ++cursor; // skip worker_id

        // optionLength asserted in getNumDVNs (skip check)
        uint16 optionLength = _options.toUint16(cursor);
        cursor += 2;

        // dvnIdx asserted in getNumDVNs (skip check)
        uint8 dvnIdx = _options.toUint8(cursor);

        // dvnIdx must equal to the lastDVNIdx for the first option
        // so it is always skipped in the first option
        // this operation slices out options whenever the scan finds a different lastDVNIdx
        if (lastDVNIdx == 255) {
          lastDVNIdx = dvnIdx;
        } else if (dvnIdx != lastDVNIdx) {
          uint256 len = cursor - start - 3; // 3 is for worker_id and option_length
          bytes memory opt = _options.slice(start, len);
          _insertDVNOptions(dvnOptions, dvnIndices, lastDVNIdx, opt);

          // reset the start and lastDVNIdx
          start += len;
          lastDVNIdx = dvnIdx;
        }

        cursor += optionLength;
      }

      // skip check the cursor here because the cursor is asserted in getNumDVNs
      // if we have reached the end of the options, we need to process the last dvn
      uint256 size = cursor - start;
      bytes memory op = _options.slice(start, size);
      _insertDVNOptions(dvnOptions, dvnIndices, lastDVNIdx, op);

      // revert dvnIndices to start from 0
      for (uint8 i = 0; i < numDVNs; ++i) {
        --dvnIndices[i];
      }
    }
  }

  function _insertDVNOptions(
    bytes[] memory _dvnOptions,
    uint8[] memory _dvnIndices,
    uint8 _dvnIdx,
    bytes memory _newOptions
  ) internal pure {
    // dvnIdx starts from 0 but default value of dvnIndices is 0,
    // so we tell if the slot is empty by adding 1 to dvnIdx
    if (_dvnIdx == 255) revert DVN_InvalidDVNIdx();
    uint8 dvnIdxAdj = _dvnIdx + 1;

    for (uint256 j = 0; j < _dvnIndices.length; ++j) {
      uint8 index = _dvnIndices[j];
      if (dvnIdxAdj == index) {
        _dvnOptions[j] = abi.encodePacked(_dvnOptions[j], _newOptions);
        break;
      } else if (index == 0) {
        // empty slot, that means it is the first time we see this dvn
        _dvnIndices[j] = dvnIdxAdj;
        _dvnOptions[j] = _newOptions;
        break;
      }
    }
  }

  /// @dev get the number of unique dvns
  /// @param _options the format is the same as groupDVNOptionsByIdx
  function getNumDVNs(bytes memory _options) internal pure returns (uint8 numDVNs) {
    uint256 cursor = 0;
    BitMap256 bitmap;

    // find number of unique dvn_idx
    unchecked {
      while (cursor < _options.length) {
        ++cursor; // skip worker_id

        uint16 optionLength = _options.toUint16(cursor);
        cursor += 2;
        if (optionLength < 2) revert DVN_InvalidDVNOptions(cursor); // at least 1 byte for dvn_idx and 1 byte for
          // option_type

        uint8 dvnIdx = _options.toUint8(cursor);

        // if dvnIdx is not set, increment numDVNs
        // max num of dvns is 255, 255 is an invalid dvn_idx
        // The order of the dvnIdx is not required to be sequential, as enforcing the order may weaken
        // the composability of the options. e.g. if we refrain from enforcing the order, an OApp that has
        // already enforced certain options can append additional options to the end of the enforced
        // ones without restrictions.
        if (dvnIdx == 255) revert DVN_InvalidDVNIdx();
        if (!bitmap.get(dvnIdx)) {
          ++numDVNs;
          bitmap = bitmap.set(dvnIdx);
        }

        cursor += optionLength;
      }
    }
    if (cursor != _options.length) revert DVN_InvalidDVNOptions(cursor);
  }

  /// @dev decode the next dvn option from _options starting from the specified cursor
  /// @param _options the format is the same as groupDVNOptionsByIdx
  /// @param _cursor the cursor to start decoding
  /// @return optionType the type of the option
  /// @return option the option
  /// @return cursor the cursor to start decoding the next option
  function nextDVNOption(bytes calldata _options, uint256 _cursor)
    internal
    pure
    returns (uint8 optionType, bytes calldata option, uint256 cursor)
  {
    unchecked {
      // skip worker id
      cursor = _cursor + 1;

      // read option size
      uint16 size = _options.toU16(cursor);
      cursor += 2;

      // read option type
      optionType = _options.toU8(cursor + 1); // skip dvn_idx

      // startCursor and endCursor are used to slice the option from _options
      uint256 startCursor = cursor + 2; // skip option type and dvn_idx
      uint256 endCursor = cursor + size;
      option = _options[startCursor:endCursor];
      cursor += size;
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import { IERC165 } from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
    return interfaceId == type(IERC165).interfaceId;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import { IERC721 } from "./IERC721.sol";
import { IERC721Receiver } from "./IERC721Receiver.sol";
import { IERC721Metadata } from "./extensions/IERC721Metadata.sol";
import { Context } from "../../utils/Context.sol";
import { Strings } from "../../utils/Strings.sol";
import { IERC165, ERC165 } from "../../utils/introspection/ERC165.sol";
import { IERC721Errors } from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {
  using Strings for uint256;

  // Token name
  string private _name;

  // Token symbol
  string private _symbol;

  mapping(uint256 tokenId => address) private _owners;

  mapping(address owner => uint256) private _balances;

  mapping(uint256 tokenId => address) private _tokenApprovals;

  mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;

  /**
   * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }

  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
    return interfaceId == type(IERC721).interfaceId || interfaceId == type(IERC721Metadata).interfaceId
      || super.supportsInterface(interfaceId);
  }

  /**
   * @dev See {IERC721-balanceOf}.
   */
  function balanceOf(address owner) public view virtual returns (uint256) {
    if (owner == address(0)) {
      revert ERC721InvalidOwner(address(0));
    }
    return _balances[owner];
  }

  /**
   * @dev See {IERC721-ownerOf}.
   */
  function ownerOf(uint256 tokenId) public view virtual returns (address) {
    return _requireOwned(tokenId);
  }

  /**
   * @dev See {IERC721Metadata-name}.
   */
  function name() public view virtual returns (string memory) {
    return _name;
  }

  /**
   * @dev See {IERC721Metadata-symbol}.
   */
  function symbol() public view virtual returns (string memory) {
    return _symbol;
  }

  /**
   * @dev See {IERC721Metadata-tokenURI}.
   */
  function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
    _requireOwned(tokenId);

    string memory baseURI = _baseURI();
    return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
  }

  /**
   * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
   * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
   * by default, can be overridden in child contracts.
   */
  function _baseURI() internal view virtual returns (string memory) {
    return "";
  }

  /**
   * @dev See {IERC721-approve}.
   */
  function approve(address to, uint256 tokenId) public virtual {
    _approve(to, tokenId, _msgSender());
  }

  /**
   * @dev See {IERC721-getApproved}.
   */
  function getApproved(uint256 tokenId) public view virtual returns (address) {
    _requireOwned(tokenId);

    return _getApproved(tokenId);
  }

  /**
   * @dev See {IERC721-setApprovalForAll}.
   */
  function setApprovalForAll(address operator, bool approved) public virtual {
    _setApprovalForAll(_msgSender(), operator, approved);
  }

  /**
   * @dev See {IERC721-isApprovedForAll}.
   */
  function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
    return _operatorApprovals[owner][operator];
  }

  /**
   * @dev See {IERC721-transferFrom}.
   */
  function transferFrom(address from, address to, uint256 tokenId) public virtual {
    if (to == address(0)) {
      revert ERC721InvalidReceiver(address(0));
    }
    // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
    // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
    address previousOwner = _update(to, tokenId, _msgSender());
    if (previousOwner != from) {
      revert ERC721IncorrectOwner(from, tokenId, previousOwner);
    }
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId) public {
    safeTransferFrom(from, to, tokenId, "");
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
    transferFrom(from, to, tokenId);
    _checkOnERC721Received(from, to, tokenId, data);
  }

  /**
   * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
   *
   * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
   * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
   * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
   * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
   */
  function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
    return _owners[tokenId];
  }

  /**
   * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
   */
  function _getApproved(uint256 tokenId) internal view virtual returns (address) {
    return _tokenApprovals[tokenId];
  }

  /**
   * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
   * particular (ignoring whether it is owned by `owner`).
   *
   * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
   * assumption.
   */
  function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
    return spender != address(0)
      && (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
  }

  /**
   * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
   * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
   * the `spender` for the specific `tokenId`.
   *
   * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
   * assumption.
   */
  function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
    if (!_isAuthorized(owner, spender, tokenId)) {
      if (owner == address(0)) {
        revert ERC721NonexistentToken(tokenId);
      } else {
        revert ERC721InsufficientApproval(spender, tokenId);
      }
    }
  }

  /**
   * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
   *
   * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
   * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
   *
   * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
   * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
   * remain consistent with one another.
   */
  function _increaseBalance(address account, uint128 value) internal virtual {
    unchecked {
      _balances[account] += value;
    }
  }

  /**
   * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
   * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
   *
   * The `auth` argument is optional. If the value passed is non 0, then this function will check that
   * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
   *
   * Emits a {Transfer} event.
   *
   * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
   */
  function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
    address from = _ownerOf(tokenId);

    // Perform (optional) operator check
    if (auth != address(0)) {
      _checkAuthorized(from, auth, tokenId);
    }

    // Execute the update
    if (from != address(0)) {
      // Clear approval. No need to re-authorize or emit the Approval event
      _approve(address(0), tokenId, address(0), false);

      unchecked {
        _balances[from] -= 1;
      }
    }

    if (to != address(0)) {
      unchecked {
        _balances[to] += 1;
      }
    }

    _owners[tokenId] = to;

    emit Transfer(from, to, tokenId);

    return from;
  }

  /**
   * @dev Mints `tokenId` and transfers it to `to`.
   *
   * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
   *
   * Requirements:
   *
   * - `tokenId` must not exist.
   * - `to` cannot be the zero address.
   *
   * Emits a {Transfer} event.
   */
  function _mint(address to, uint256 tokenId) internal {
    if (to == address(0)) {
      revert ERC721InvalidReceiver(address(0));
    }
    address previousOwner = _update(to, tokenId, address(0));
    if (previousOwner != address(0)) {
      revert ERC721InvalidSender(address(0));
    }
  }

  /**
   * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
   *
   * Requirements:
   *
   * - `tokenId` must not exist.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a
   * safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function _safeMint(address to, uint256 tokenId) internal {
    _safeMint(to, tokenId, "");
  }

  /**
   * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
   * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
   */
  function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
    _mint(to, tokenId);
    _checkOnERC721Received(address(0), to, tokenId, data);
  }

  /**
   * @dev Destroys `tokenId`.
   * The approval is cleared when the token is burned.
   * This is an internal function that does not check if the sender is authorized to operate on the token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   *
   * Emits a {Transfer} event.
   */
  function _burn(uint256 tokenId) internal {
    address previousOwner = _update(address(0), tokenId, address(0));
    if (previousOwner == address(0)) {
      revert ERC721NonexistentToken(tokenId);
    }
  }

  /**
   * @dev Transfers `tokenId` from `from` to `to`.
   *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   *
   * Emits a {Transfer} event.
   */
  function _transfer(address from, address to, uint256 tokenId) internal {
    if (to == address(0)) {
      revert ERC721InvalidReceiver(address(0));
    }
    address previousOwner = _update(to, tokenId, address(0));
    if (previousOwner == address(0)) {
      revert ERC721NonexistentToken(tokenId);
    } else if (previousOwner != from) {
      revert ERC721IncorrectOwner(from, tokenId, previousOwner);
    }
  }

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
   * are aware of the ERC721 standard to prevent tokens from being forever locked.
   *
   * `data` is additional data, it has no specified format and it is sent in call to `to`.
   *
   * This internal function is like {safeTransferFrom} in the sense that it invokes
   * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
   * implement alternative mechanisms to perform token transfer, such as signature-based.
   *
   * Requirements:
   *
   * - `tokenId` token must exist and be owned by `from`.
   * - `to` cannot be the zero address.
   * - `from` cannot be the zero address.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a
   * safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function _safeTransfer(address from, address to, uint256 tokenId) internal {
    _safeTransfer(from, to, tokenId, "");
  }

  /**
   * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data`
   * parameter which is
   * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
   */
  function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
    _transfer(from, to, tokenId);
    _checkOnERC721Received(from, to, tokenId, data);
  }

  /**
   * @dev Approve `to` to operate on `tokenId`
   *
   * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
   * either the owner of the token, or approved to operate on all tokens held by this owner.
   *
   * Emits an {Approval} event.
   *
   * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
   */
  function _approve(address to, uint256 tokenId, address auth) internal {
    _approve(to, tokenId, auth, true);
  }

  /**
   * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
   * emitted in the context of transfers.
   */
  function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
    // Avoid reading the owner unless necessary
    if (emitEvent || auth != address(0)) {
      address owner = _requireOwned(tokenId);

      // We do not use _isAuthorized because single-token approvals should not be able to call approve
      if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
        revert ERC721InvalidApprover(auth);
      }

      if (emitEvent) {
        emit Approval(owner, to, tokenId);
      }
    }

    _tokenApprovals[tokenId] = to;
  }

  /**
   * @dev Approve `operator` to operate on all of `owner` tokens
   *
   * Requirements:
   * - operator can't be the address zero.
   *
   * Emits an {ApprovalForAll} event.
   */
  function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
    if (operator == address(0)) {
      revert ERC721InvalidOperator(operator);
    }
    _operatorApprovals[owner][operator] = approved;
    emit ApprovalForAll(owner, operator, approved);
  }

  /**
   * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
   * Returns the owner.
   *
   * Overrides to ownership logic should be done to {_ownerOf}.
   */
  function _requireOwned(uint256 tokenId) internal view returns (address) {
    address owner = _ownerOf(tokenId);
    if (owner == address(0)) {
      revert ERC721NonexistentToken(tokenId);
    }
    return owner;
  }

  /**
   * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
   * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
   *
   * @param from address representing the previous owner of the given token ID
   * @param to target address that will receive the tokens
   * @param tokenId uint256 ID of the token to be transferred
   * @param data bytes optional data to send along with the call
   */
  function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
    if (to.code.length > 0) {
      try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
        if (retval != IERC721Receiver.onERC721Received.selector) {
          revert ERC721InvalidReceiver(to);
        }
      } catch (bytes memory reason) {
        if (reason.length == 0) {
          revert ERC721InvalidReceiver(to);
        } else {
          /// @solidity memory-safe-assembly
          assembly {
            revert(add(32, reason), mload(reason))
          }
        }
      }
    }
  }
}

// SPDX-License-Identifier: LZBL-1.2

pragma solidity ^0.8.20;

import { CalldataBytesLib } from "../../libs/CalldataBytesLib.sol";

library ExecutorOptions {
  using CalldataBytesLib for bytes;

  uint8 internal constant WORKER_ID = 1;

  uint8 internal constant OPTION_TYPE_LZRECEIVE = 1;
  uint8 internal constant OPTION_TYPE_NATIVE_DROP = 2;
  uint8 internal constant OPTION_TYPE_LZCOMPOSE = 3;
  uint8 internal constant OPTION_TYPE_ORDERED_EXECUTION = 4;

  error Executor_InvalidLzReceiveOption();
  error Executor_InvalidNativeDropOption();
  error Executor_InvalidLzComposeOption();

  /// @dev decode the next executor option from the options starting from the specified cursor
  /// @param _options [executor_id][executor_option][executor_id][executor_option]...
  ///        executor_option = [option_size][option_type][option]
  ///        option_size = len(option_type) + len(option)
  ///        executor_id: uint8, option_size: uint16, option_type: uint8, option: bytes
  /// @param _cursor the cursor to start decoding from
  /// @return optionType the type of the option
  /// @return option the option of the executor
  /// @return cursor the cursor to start decoding the next executor option
  function nextExecutorOption(bytes calldata _options, uint256 _cursor)
    internal
    pure
    returns (uint8 optionType, bytes calldata option, uint256 cursor)
  {
    unchecked {
      // skip worker id
      cursor = _cursor + 1;

      // read option size
      uint16 size = _options.toU16(cursor);
      cursor += 2;

      // read option type
      optionType = _options.toU8(cursor);

      // startCursor and endCursor are used to slice the option from _options
      uint256 startCursor = cursor + 1; // skip option type
      uint256 endCursor = cursor + size;
      option = _options[startCursor:endCursor];
      cursor += size;
    }
  }

  function decodeLzReceiveOption(bytes calldata _option) internal pure returns (uint128 gas, uint128 value) {
    if (_option.length != 16 && _option.length != 32) revert Executor_InvalidLzReceiveOption();
    gas = _option.toU128(0);
    value = _option.length == 32 ? _option.toU128(16) : 0;
  }

  function decodeNativeDropOption(bytes calldata _option) internal pure returns (uint128 amount, bytes32 receiver) {
    if (_option.length != 48) revert Executor_InvalidNativeDropOption();
    amount = _option.toU128(0);
    receiver = _option.toB32(16);
  }

  function decodeLzComposeOption(bytes calldata _option)
    internal
    pure
    returns (uint16 index, uint128 gas, uint128 value)
  {
    if (_option.length != 18 && _option.length != 34) revert Executor_InvalidLzComposeOption();
    index = _option.toU16(0);
    gas = _option.toU128(2);
    value = _option.length == 34 ? _option.toU128(18) : 0;
  }

  function encodeLzReceiveOption(uint128 _gas, uint128 _value) internal pure returns (bytes memory) {
    return _value == 0 ? abi.encodePacked(_gas) : abi.encodePacked(_gas, _value);
  }

  function encodeNativeDropOption(uint128 _amount, bytes32 _receiver) internal pure returns (bytes memory) {
    return abi.encodePacked(_amount, _receiver);
  }

  function encodeLzComposeOption(uint16 _index, uint128 _gas, uint128 _value) internal pure returns (bytes memory) {
    return _value == 0 ? abi.encodePacked(_index, _gas) : abi.encodePacked(_index, _gas, _value);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.25;

interface HeroOFTErrors {
  error GasLimitCannotBeZero();
  error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
  error ConversionOutOfBounds();
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IHeroOFTX } from "./IHeroOFTX.sol";
import { HeroOFTXCallbacks } from "./HeroOFTXCallbacks.sol";
import { HeroOFTErrors } from "./HeroOFTErrors.sol";

import { OApp, MessagingFee, MessagingReceipt, Origin } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/OApp.sol";
import { OptionsBuilder } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/libs/OptionsBuilder.sol";

/**
 * @title HeroOFTX
 * @notice Base OFT LZv2 with TickerOperation support
 */
abstract contract HeroOFTX is IHeroOFTX, HeroOFTXCallbacks, OApp, HeroOFTErrors {
  using OptionsBuilder for bytes;

  uint32 public lzGasLimit;
  bytes public defaultLzOption;

  constructor(uint32 _lzGasLimit) {
    _updateLayerZeroGasLimit(_lzGasLimit);
  }

  function send(uint32 _dstEid, address _to, uint256 _amountIn, uint256 _minAmountOut)
    external
    payable
    returns (MessagingReceipt memory msgReceipt)
  {
    bytes memory option = defaultLzOption;
    uint256 amountOrIdReceiving = _debit(_amountIn, _minAmountOut);

    if (amountOrIdReceiving < _minAmountOut) {
      revert SlippageExceeded(amountOrIdReceiving, _minAmountOut);
    }

    bytes memory payload = _generateMessage(_to, amountOrIdReceiving);
    MessagingFee memory fee = _estimateFee(_dstEid, payload, option);

    msgReceipt = _lzSend(_dstEid, payload, option, fee, payable(msg.sender));

    emit OFTSent(msgReceipt.guid, _dstEid, msg.sender, amountOrIdReceiving);

    return msgReceipt;
  }

  function _lzReceive(
    Origin calldata _origin,
    bytes32 _guid,
    bytes calldata _message,
    address, /*_executor*/ // @dev unused in the default implementation.
    bytes calldata /*_extraData*/ // @dev unused in the default implementation.
  ) internal virtual override {
    (address to, uint64 idOrAmount) = abi.decode(_message, (address, uint64));
    uint256 amountReceivedLD = _credit(to, _toLocalDecimals(idOrAmount), false);

    emit OFTReceived(_guid, _origin.srcEid, to, amountReceivedLD);
  }

  /**
   * @notice _toLocalDecimals Scale back to local chain decimals
   * @param _value Value from the message
   * @dev This function must be overridden by ERCs that handle high balances
   * @dev For ERC721, this won't be an issue since there are no collections that reach uint64.max
   * @dev Refer to BaseERC20.sol for more details.
   */
  function _toLocalDecimals(uint64 _value) internal view virtual returns (uint256) {
    return _value;
  }

  function estimateFee(uint32 _dstEid, address _to, uint256 _tokenId) external view returns (uint256) {
    return _estimateFee(_dstEid, _generateMessage(_to, _tokenId), defaultLzOption).nativeFee;
  }

  function _generateMessage(address _to, uint256 _amountOrId) internal view virtual returns (bytes memory) {
    return abi.encode(_to, _toSharedDecimals(_amountOrId));
  }

  function _estimateFee(uint32 _dstEid, bytes memory _message, bytes memory _options)
    internal
    view
    returns (MessagingFee memory fee_)
  {
    return _quote(_dstEid, _message, _options, false);
  }

  /**
   * @notice _toSharedDecimals Scale back to share chain decimals, some chains only support 6 decimals
   * @param _value Amount sending to another chain
   * @dev This function must be overridden by ERCs that handle high balances
   * @dev For ERC721, this won't be an issue since there are no collections that reach uint64.max
   * @dev Refer to BaseERC20.sol for more details.
   */
  function _toSharedDecimals(uint256 _value) internal view virtual returns (uint64) {
    if (_value > type(uint64).max) revert ConversionOutOfBounds();

    return uint64(_value);
  }

  /**
   * @notice updateLayerZeroGasLimit Set a new gas limit for LZ
   * @param _lzGasLimit gas limit of a LZ Message execution
   */
  function updateLayerZeroGasLimit(uint32 _lzGasLimit) external virtual onlyOwner {
    _updateLayerZeroGasLimit(_lzGasLimit);
  }

  function _updateLayerZeroGasLimit(uint32 _lzGasLimit) internal virtual {
    if (_lzGasLimit == 0) revert GasLimitCannotBeZero();

    lzGasLimit = _lzGasLimit;
    defaultLzOption = OptionsBuilder.newOptions().addExecutorLzReceiveOption(lzGasLimit, 0);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

abstract contract HeroOFTXCallbacks {
  function _debit(uint256 _amountOrId, uint256 _minAmount) internal virtual returns (uint256 _amountSendingOrId_);
  function _credit(address _to, uint256 _value, bool _isFrozen) internal virtual returns (uint256 amountReceived_);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
  /**
   * @dev Returns true if this contract implements the interface defined by
   * `interfaceId`. See the corresponding
   * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
   * to learn more about how these ids are created.
   *
   * This function call must use less than 30 000 gas.
   */
  function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the value of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the value of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves a `value` amount of tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 value) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
   * caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 value) external returns (bool);

  /**
   * @dev Moves a `value` amount of tokens from `from` to `to` using the
   * allowance mechanism. `value` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import { IERC20 } from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
  /**
   * @dev Returns the name of the token.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the symbol of the token.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the decimals places of the token.
   */
  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
  /**
   * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
   * given ``owner``'s signed approval.
   *
   * IMPORTANT: The same issues {IERC20-approve} has related to transaction
   * ordering also apply here.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `deadline` must be a timestamp in the future.
   * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
   * over the EIP712-formatted function arguments.
   * - the signature must use ``owner``'s current nonce (see {nonces}).
   *
   * For more information on the signature format, see the
   * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
   * section].
   *
   * CAUTION: See Security Considerations above.
   */
  function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
    external;

  /**
   * @dev Returns the current nonce for `owner`. This value must be
   * included whenever a signature is generated for {permit}.
   *
   * Every successful call to {permit} increases ``owner``'s nonce by one. This
   * prevents a signature from being used multiple times.
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
   */
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import { IERC165 } from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
  /**
   * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
   */
  event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

  /**
   * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
   */
  event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

  /**
   * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
   */
  event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

  /**
   * @dev Returns the number of tokens in ``owner``'s account.
   */
  function balanceOf(address owner) external view returns (uint256 balance);

  /**
   * @dev Returns the owner of the `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function ownerOf(uint256 tokenId) external view returns (address owner);

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
   *   a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
   * are aware of the ERC721 protocol to prevent tokens from being forever locked.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
   *   {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
   *   a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId) external;

  /**
   * @dev Transfers `tokenId` token from `from` to `to`.
   *
   * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
   * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
   * understand this adds an external call which potentially creates a reentrancy vulnerability.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 tokenId) external;

  /**
   * @dev Gives permission to `to` to transfer `tokenId` token to another account.
   * The approval is cleared when the token is transferred.
   *
   * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
   *
   * Requirements:
   *
   * - The caller must own the token or be an approved operator.
   * - `tokenId` must exist.
   *
   * Emits an {Approval} event.
   */
  function approve(address to, uint256 tokenId) external;

  /**
   * @dev Approve or remove `operator` as an operator for the caller.
   * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
   *
   * Requirements:
   *
   * - The `operator` cannot be the address zero.
   *
   * Emits an {ApprovalForAll} event.
   */
  function setApprovalForAll(address operator, bool approved) external;

  /**
   * @dev Returns the account approved for `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function getApproved(uint256 tokenId) external view returns (address operator);

  /**
   * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
   *
   * See {setApprovalForAll}
   */
  function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import { IERC721 } from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
  /**
   * @dev Returns the token collection name.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the token collection symbol.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
   */
  function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
  /**
   * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
   * by `operator` from `from`, this function is called.
   *
   * It must return its Solidity selector to confirm the token transfer.
   * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
   * reverted.
   *
   * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
   */
  function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data)
    external
    returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity >= 0.8.0;

interface IHeroOFTX {
  event OFTSent(bytes32 indexed guid, uint32 indexed destinationEndpointId, address indexed to, uint256 amountOrId);
  event OFTReceived(bytes32 indexed guid, uint32 indexed sourceEndpointId, address indexed to, uint256 amountOrId);

  /**
   * @notice Estimate Cross-chain fee
   * @param _dstEid Destination LZ Endpoint ID
   * @param _to Receiver of the asset
   * @param _tokenIdOrAmount NFT ID or Amount of the Token sending
   */
  function estimateFee(uint32 _dstEid, address _to, uint256 _tokenIdOrAmount) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";

struct MessagingParams {
  uint32 dstEid;
  bytes32 receiver;
  bytes message;
  bytes options;
  bool payInLzToken;
}

struct MessagingReceipt {
  bytes32 guid;
  uint64 nonce;
  MessagingFee fee;
}

struct MessagingFee {
  uint256 nativeFee;
  uint256 lzTokenFee;
}

struct Origin {
  uint32 srcEid;
  bytes32 sender;
  uint64 nonce;
}

interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
  event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);

  event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);

  event PacketDelivered(Origin origin, address receiver);

  event LzReceiveAlert(
    address indexed receiver,
    address indexed executor,
    Origin origin,
    bytes32 guid,
    uint256 gas,
    uint256 value,
    bytes message,
    bytes extraData,
    bytes reason
  );

  event LzTokenSet(address token);

  event DelegateSet(address sender, address delegate);

  function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);

  function send(MessagingParams calldata _params, address _refundAddress)
    external
    payable
    returns (MessagingReceipt memory);

  function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;

  function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);

  function initializable(Origin calldata _origin, address _receiver) external view returns (bool);

  function lzReceive(
    Origin calldata _origin,
    address _receiver,
    bytes32 _guid,
    bytes calldata _message,
    bytes calldata _extraData
  ) external payable;

  // oapp can burn messages partially by calling this function with its own business logic if messages are verified in
  // order
  function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;

  function setLzToken(address _lzToken) external;

  function lzToken() external view returns (address);

  function nativeToken() external view returns (address);

  function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

import { Origin } from "./ILayerZeroEndpointV2.sol";

interface ILayerZeroReceiver {
  function allowInitializePath(Origin calldata _origin) external view returns (bool);

  function nextNonce(uint32 _eid, bytes32 _sender) external view returns (uint64);

  function lzReceive(
    Origin calldata _origin,
    bytes32 _guid,
    bytes calldata _message,
    address _executor,
    bytes calldata _extraData
  ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

struct SetConfigParam {
  uint32 eid;
  uint32 configType;
  bytes config;
}

interface IMessageLibManager {
  struct Timeout {
    address lib;
    uint256 expiry;
  }

  event LibraryRegistered(address newLib);
  event DefaultSendLibrarySet(uint32 eid, address newLib);
  event DefaultReceiveLibrarySet(uint32 eid, address newLib);
  event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
  event SendLibrarySet(address sender, uint32 eid, address newLib);
  event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
  event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);

  function registerLibrary(address _lib) external;

  function isRegisteredLibrary(address _lib) external view returns (bool);

  function getRegisteredLibraries() external view returns (address[] memory);

  function setDefaultSendLibrary(uint32 _eid, address _newLib) external;

  function defaultSendLibrary(uint32 _eid) external view returns (address);

  function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _timeout) external;

  function defaultReceiveLibrary(uint32 _eid) external view returns (address);

  function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;

  function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);

  function isSupportedEid(uint32 _eid) external view returns (bool);

  function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);

  /// ------------------- OApp interfaces -------------------
  function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;

  function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);

  function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);

  function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;

  function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);

  function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _gracePeriod) external;

  function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);

  function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;

  function getConfig(address _oapp, address _lib, uint32 _eid, uint32 _configType)
    external
    view
    returns (bytes memory config);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingChannel {
  event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
  event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
  event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);

  function eid() external view returns (uint32);

  // this is an emergency function if a message cannot be verified for some reasons
  // required to provide _nextNonce to avoid race condition
  function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;

  function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

  function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

  function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);

  function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);

  function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);

  function inboundPayloadHash(address _receiver, uint32 _srcEid, bytes32 _sender, uint64 _nonce)
    external
    view
    returns (bytes32);

  function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingComposer {
  event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
  event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
  event LzComposeAlert(
    address indexed from,
    address indexed to,
    address indexed executor,
    bytes32 guid,
    uint16 index,
    uint256 gas,
    uint256 value,
    bytes message,
    bytes extraData,
    bytes reason
  );

  function composeQueue(address _from, address _to, bytes32 _guid, uint16 _index)
    external
    view
    returns (bytes32 messageHash);

  function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;

  function lzCompose(
    address _from,
    address _to,
    bytes32 _guid,
    uint16 _index,
    bytes calldata _message,
    bytes calldata _extraData
  ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingContext {
  function isSendingMessage() external view returns (bool);

  function getSendContext() external view returns (uint32 dstEid, address sender);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

/**
 * @title IOAppCore
 */
interface IOAppCore {
  // Custom error messages
  error OnlyPeer(uint32 eid, bytes32 sender);
  error NoPeer(uint32 eid);
  error InvalidEndpointCall();
  error InvalidDelegate();

  // Event emitted when a peer (OApp) is set for a corresponding endpoint
  event PeerSet(uint32 eid, bytes32 peer);

  /**
   * @notice Retrieves the OApp version information.
   * @return senderVersion The version of the OAppSender.sol contract.
   * @return receiverVersion The version of the OAppReceiver.sol contract.
   */
  function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);

  /**
   * @notice Retrieves the LayerZero endpoint associated with the OApp.
   * @return iEndpoint The LayerZero endpoint as an interface.
   */
  function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);

  /**
   * @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
   * @param _eid The endpoint ID.
   * @return peer The peer address (OApp instance) associated with the corresponding endpoint.
   */
  function peers(uint32 _eid) external view returns (bytes32 peer);

  /**
   * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
   * @param _eid The endpoint ID.
   * @param _peer The address of the peer to be associated with the corresponding endpoint.
   */
  function setPeer(uint32 _eid, bytes32 _peer) external;

  /**
   * @notice Sets the delegate address for the OApp Core.
   * @param _delegate The address of the delegate to be set.
   */
  function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import {
  ILayerZeroReceiver, Origin
} from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroReceiver.sol";

interface IOAppReceiver is ILayerZeroReceiver {
  /**
   * @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
   * @param _origin The origin information containing the source endpoint and sender address.
   *  - srcEid: The source chain endpoint ID.
   *  - sender: The sender address on the src chain.
   *  - nonce: The nonce of the message.
   * @param _message The lzReceive payload.
   * @param _sender The sender address.
   * @return isSender Is a valid sender.
   *
   * @dev Applications can optionally choose to implement a separate composeMsg sender that is NOT the bridging layer.
   * @dev The default sender IS the OAppReceiver implementer.
   */
  function isComposeMsgSender(Origin calldata _origin, bytes calldata _message, address _sender)
    external
    view
    returns (bool isSender);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { OFT721 } from "src/tokens/ERC721/OFT721.sol";
import { IERC20Metadata } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { SendNativeHelper } from "src/SendNativeHelper.sol";
import { Strings } from "@openzeppelin/contracts/utils/Strings.sol";

/**
 * @title KeyOFT721
 * @notice Each Heroglyph Tokens are linked to a key, without the key, you can not mint the Token
 */
contract KeyOFT721 is OFT721, SendNativeHelper {
  using SafeERC20 for IERC20Metadata;

  error InvalidAmount();
  error NoETHNedded();
  error CannotBeBoughtHere();
  error MaxSupplyReached();

  IERC20Metadata public immutable inputToken;
  uint256 public immutable maxSupply;
  address public immutable treasury;
  uint256 public immutable cost;
  uint256 public totalSupply;

  string internal displayName;
  string internal imageURI;

  constructor(
    string memory _name,
    string memory _symbol,
    string memory _displayName,
    string memory _imageURI,
    address _owner,
    address _localLzEndpoint,
    uint32 _lzGasLimit,
    uint256 _maxSupply,
    uint256 _cost,
    address _inputToken,
    address _treasury
  ) OFT721(_name, _symbol, "", _owner, _localLzEndpoint, _lzGasLimit) {
    if (_treasury == address(0)) revert("Treasury is Zero");

    maxSupply = _maxSupply;
    cost = _cost;
    inputToken = IERC20Metadata(_inputToken);
    treasury = _treasury;
    displayName = _displayName;
    imageURI = _imageURI;
  }

  function buy() external payable {
    if (cost == 0) revert CannotBeBoughtHere();

    uint256 cacheTotalSupply = totalSupply + 1;

    if (address(inputToken) == address(0) && msg.value != cost) revert InvalidAmount();
    if (address(inputToken) != address(0)) {
      if (msg.value != 0) revert NoETHNedded();
      inputToken.safeTransferFrom(msg.sender, treasury, cost);
    }

    if (maxSupply != 0 && cacheTotalSupply > maxSupply) revert MaxSupplyReached();

    _safeMint(msg.sender, cacheTotalSupply);
    totalSupply = cacheTotalSupply;

    _sendNative(treasury, msg.value, true);
  }

  function getCostInWEI() external view returns (uint256) {
    if (address(inputToken) == address(0)) return cost;

    uint8 decimals = inputToken.decimals();
    if (decimals < 18) return cost * (10 ** (18 - decimals));

    return cost;
  }

  function tokenURI(uint256 tokenId) public view override returns (string memory) {
    _requireOwned(tokenId);

    string memory data = string(
      abi.encodePacked(
        '{"name":"',
        displayName,
        Strings.toString(tokenId),
        '","description":"Unlock one of the Heroglyph`s tickers","image":"',
        imageURI,
        '"}'
      )
    );

    return string(abi.encodePacked("data:application/json;utf8,", data));
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
  /**
   * @dev Muldiv operation overflow.
   */
  error MathOverflowedMulDiv();

  enum Rounding {
    Floor, // Toward negative infinity
    Ceil, // Toward positive infinity
    Trunc, // Toward zero
    Expand // Away from zero

  }

  /**
   * @dev Returns the addition of two unsigned integers, with an overflow flag.
   */
  function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      uint256 c = a + b;
      if (c < a) return (false, 0);
      return (true, c);
    }
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
   */
  function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b > a) return (false, 0);
      return (true, a - b);
    }
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
   */
  function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
      // benefit is lost if 'b' is also tested.
      // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
      if (a == 0) return (true, 0);
      uint256 c = a * b;
      if (c / a != b) return (false, 0);
      return (true, c);
    }
  }

  /**
   * @dev Returns the division of two unsigned integers, with a division by zero flag.
   */
  function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b == 0) return (false, 0);
      return (true, a / b);
    }
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
   */
  function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b == 0) return (false, 0);
      return (true, a % b);
    }
  }

  /**
   * @dev Returns the largest of two numbers.
   */
  function max(uint256 a, uint256 b) internal pure returns (uint256) {
    return a > b ? a : b;
  }

  /**
   * @dev Returns the smallest of two numbers.
   */
  function min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }

  /**
   * @dev Returns the average of two numbers. The result is rounded towards
   * zero.
   */
  function average(uint256 a, uint256 b) internal pure returns (uint256) {
    // (a + b) / 2 can overflow.
    return (a & b) + (a ^ b) / 2;
  }

  /**
   * @dev Returns the ceiling of the division of two numbers.
   *
   * This differs from standard division with `/` in that it rounds towards infinity instead
   * of rounding towards zero.
   */
  function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    if (b == 0) {
      // Guarantee the same behavior as in a regular Solidity division.
      return a / b;
    }

    // (a + b - 1) / b can overflow on addition, so we distribute.
    return a == 0 ? 0 : (a - 1) / b + 1;
  }

  /**
   * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
   * denominator == 0.
   * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
   * Uniswap Labs also under MIT license.
   */
  function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
    unchecked {
      // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
      // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
      // variables such that product = prod1 * 2^256 + prod0.
      uint256 prod0 = x * y; // Least significant 256 bits of the product
      uint256 prod1; // Most significant 256 bits of the product
      assembly {
        let mm := mulmod(x, y, not(0))
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
      }

      // Handle non-overflow cases, 256 by 256 division.
      if (prod1 == 0) {
        // Solidity will revert if denominator == 0, unlike the div opcode on its own.
        // The surrounding unchecked block does not change this fact.
        // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
        return prod0 / denominator;
      }

      // Make sure the result is less than 2^256. Also prevents denominator == 0.
      if (denominator <= prod1) {
        revert MathOverflowedMulDiv();
      }

      ///////////////////////////////////////////////
      // 512 by 256 division.
      ///////////////////////////////////////////////

      // Make division exact by subtracting the remainder from [prod1 prod0].
      uint256 remainder;
      assembly {
        // Compute remainder using mulmod.
        remainder := mulmod(x, y, denominator)

        // Subtract 256 bit number from 512 bit number.
        prod1 := sub(prod1, gt(remainder, prod0))
        prod0 := sub(prod0, remainder)
      }

      // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
      // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

      uint256 twos = denominator & (0 - denominator);
      assembly {
        // Divide denominator by twos.
        denominator := div(denominator, twos)

        // Divide [prod1 prod0] by twos.
        prod0 := div(prod0, twos)

        // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
        twos := add(div(sub(0, twos), twos), 1)
      }

      // Shift in bits from prod1 into prod0.
      prod0 |= prod1 * twos;

      // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
      // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
      // four bits. That is, denominator * inv = 1 mod 2^4.
      uint256 inverse = (3 * denominator) ^ 2;

      // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
      // works in modular arithmetic, doubling the correct bits in each step.
      inverse *= 2 - denominator * inverse; // inverse mod 2^8
      inverse *= 2 - denominator * inverse; // inverse mod 2^16
      inverse *= 2 - denominator * inverse; // inverse mod 2^32
      inverse *= 2 - denominator * inverse; // inverse mod 2^64
      inverse *= 2 - denominator * inverse; // inverse mod 2^128
      inverse *= 2 - denominator * inverse; // inverse mod 2^256

      // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
      // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
      // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
      // is no longer required.
      result = prod0 * inverse;
      return result;
    }
  }

  /**
   * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
   */
  function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
    uint256 result = mulDiv(x, y, denominator);
    if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
      result += 1;
    }
    return result;
  }

  /**
   * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
   * towards zero.
   *
   * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
   */
  function sqrt(uint256 a) internal pure returns (uint256) {
    if (a == 0) {
      return 0;
    }

    // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
    //
    // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
    // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
    //
    // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
    // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
    // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
    //
    // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
    uint256 result = 1 << (log2(a) >> 1);

    // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
    // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
    // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
    // into the expected uint128 result.
    unchecked {
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      result = (result + a / result) >> 1;
      return min(result, a / result);
    }
  }

  /**
   * @notice Calculates sqrt(a), following the selected rounding direction.
   */
  function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
    unchecked {
      uint256 result = sqrt(a);
      return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
    }
  }

  /**
   * @dev Return the log in base 2 of a positive value rounded towards zero.
   * Returns 0 if given 0.
   */
  function log2(uint256 value) internal pure returns (uint256) {
    uint256 result = 0;
    unchecked {
      if (value >> 128 > 0) {
        value >>= 128;
        result += 128;
      }
      if (value >> 64 > 0) {
        value >>= 64;
        result += 64;
      }
      if (value >> 32 > 0) {
        value >>= 32;
        result += 32;
      }
      if (value >> 16 > 0) {
        value >>= 16;
        result += 16;
      }
      if (value >> 8 > 0) {
        value >>= 8;
        result += 8;
      }
      if (value >> 4 > 0) {
        value >>= 4;
        result += 4;
      }
      if (value >> 2 > 0) {
        value >>= 2;
        result += 2;
      }
      if (value >> 1 > 0) {
        result += 1;
      }
    }
    return result;
  }

  /**
   * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
   * Returns 0 if given 0.
   */
  function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
    unchecked {
      uint256 result = log2(value);
      return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
    }
  }

  /**
   * @dev Return the log in base 10 of a positive value rounded towards zero.
   * Returns 0 if given 0.
   */
  function log10(uint256 value) internal pure returns (uint256) {
    uint256 result = 0;
    unchecked {
      if (value >= 10 ** 64) {
        value /= 10 ** 64;
        result += 64;
      }
      if (value >= 10 ** 32) {
        value /= 10 ** 32;
        result += 32;
      }
      if (value >= 10 ** 16) {
        value /= 10 ** 16;
        result += 16;
      }
      if (value >= 10 ** 8) {
        value /= 10 ** 8;
        result += 8;
      }
      if (value >= 10 ** 4) {
        value /= 10 ** 4;
        result += 4;
      }
      if (value >= 10 ** 2) {
        value /= 10 ** 2;
        result += 2;
      }
      if (value >= 10 ** 1) {
        result += 1;
      }
    }
    return result;
  }

  /**
   * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
   * Returns 0 if given 0.
   */
  function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
    unchecked {
      uint256 result = log10(value);
      return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
    }
  }

  /**
   * @dev Return the log in base 256 of a positive value rounded towards zero.
   * Returns 0 if given 0.
   *
   * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
   */
  function log256(uint256 value) internal pure returns (uint256) {
    uint256 result = 0;
    unchecked {
      if (value >> 128 > 0) {
        value >>= 128;
        result += 16;
      }
      if (value >> 64 > 0) {
        value >>= 64;
        result += 8;
      }
      if (value >> 32 > 0) {
        value >>= 32;
        result += 4;
      }
      if (value >> 16 > 0) {
        value >>= 16;
        result += 2;
      }
      if (value >> 8 > 0) {
        result += 1;
      }
    }
    return result;
  }

  /**
   * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
   * Returns 0 if given 0.
   */
  function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
    unchecked {
      uint256 result = log256(value);
      return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
    }
  }

  /**
   * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
   */
  function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
    return uint8(rounding) % 2 == 1;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

// @dev Import the 'MessagingFee' and 'MessagingReceipt' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppSender, MessagingFee, MessagingReceipt } from "./OAppSender.sol";
// @dev Import the 'Origin' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppReceiver, Origin } from "./OAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OApp
 * @dev Abstract contract serving as the base for OApp implementation, combining OAppSender and OAppReceiver
 * functionality.
 */
abstract contract OApp is OAppSender, OAppReceiver {
  /**
   * @dev Constructor to initialize the OApp with the provided endpoint and owner.
   * @param _endpoint The address of the LOCAL LayerZero endpoint.
   * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
   */
  constructor(address _endpoint, address _delegate) OAppCore(_endpoint, _delegate) { }

  /**
   * @notice Retrieves the OApp version information.
   * @return senderVersion The version of the OAppSender.sol implementation.
   * @return receiverVersion The version of the OAppReceiver.sol implementation.
   */
  function oAppVersion()
    public
    pure
    virtual
    override(OAppSender, OAppReceiver)
    returns (uint64 senderVersion, uint64 receiverVersion)
  {
    return (SENDER_VERSION, RECEIVER_VERSION);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";

/**
 * @title OAppCore
 * @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
 */
abstract contract OAppCore is IOAppCore, Ownable {
  // The LayerZero endpoint associated with the given OApp
  ILayerZeroEndpointV2 public immutable endpoint;

  // Mapping to store peers associated with corresponding endpoints
  mapping(uint32 eid => bytes32 peer) public peers;

  /**
   * @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
   * @param _endpoint The address of the LOCAL Layer Zero endpoint.
   * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
   *
   * @dev The delegate typically should be set as the owner of the contract.
   */
  constructor(address _endpoint, address _delegate) {
    endpoint = ILayerZeroEndpointV2(_endpoint);

    if (_delegate == address(0)) revert InvalidDelegate();
    endpoint.setDelegate(_delegate);
  }

  /**
   * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
   * @param _eid The endpoint ID.
   * @param _peer The address of the peer to be associated with the corresponding endpoint.
   *
   * @dev Only the owner/admin of the OApp can call this function.
   * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
   * @dev Set this to bytes32(0) to remove the peer address.
   * @dev Peer is a bytes32 to accommodate non-evm chains.
   */
  function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
    _setPeer(_eid, _peer);
  }

  /**
   * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
   * @param _eid The endpoint ID.
   * @param _peer The address of the peer to be associated with the corresponding endpoint.
   *
   * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
   * @dev Set this to bytes32(0) to remove the peer address.
   * @dev Peer is a bytes32 to accommodate non-evm chains.
   */
  function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
    peers[_eid] = _peer;
    emit PeerSet(_eid, _peer);
  }

  /**
   * @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
   * ie. the peer is set to bytes32(0).
   * @param _eid The endpoint ID.
   * @return peer The address of the peer associated with the specified endpoint.
   */
  function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
    bytes32 peer = peers[_eid];
    if (peer == bytes32(0)) revert NoPeer(_eid);
    return peer;
  }

  /**
   * @notice Sets the delegate address for the OApp.
   * @param _delegate The address of the delegate to be set.
   *
   * @dev Only the owner/admin of the OApp can call this function.
   * @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
   */
  function setDelegate(address _delegate) public onlyOwner {
    endpoint.setDelegate(_delegate);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IOAppReceiver, Origin } from "./interfaces/IOAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OAppReceiver
 * @dev Abstract contract implementing the ILayerZeroReceiver interface and extending OAppCore for OApp receivers.
 */
abstract contract OAppReceiver is IOAppReceiver, OAppCore {
  // Custom error message for when the caller is not the registered endpoint/
  error OnlyEndpoint(address addr);

  // @dev The version of the OAppReceiver implementation.
  // @dev Version is bumped when changes are made to this contract.
  uint64 internal constant RECEIVER_VERSION = 2;

  /**
   * @notice Retrieves the OApp version information.
   * @return senderVersion The version of the OAppSender.sol contract.
   * @return receiverVersion The version of the OAppReceiver.sol contract.
   *
   * @dev Providing 0 as the default for OAppSender version. Indicates that the OAppSender is not implemented.
   * ie. this is a RECEIVE only OApp.
   * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct
   * versions.
   */
  function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
    return (0, RECEIVER_VERSION);
  }

  /**
   * @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
   * @dev _origin The origin information containing the source endpoint and sender address.
   *  - srcEid: The source chain endpoint ID.
   *  - sender: The sender address on the src chain.
   *  - nonce: The nonce of the message.
   * @dev _message The lzReceive payload.
   * @param _sender The sender address.
   * @return isSender Is a valid sender.
   *
   * @dev Applications can optionally choose to implement separate composeMsg senders that are NOT the bridging layer.
   * @dev The default sender IS the OAppReceiver implementer.
   */
  function isComposeMsgSender(Origin calldata, /*_origin*/ bytes calldata, /*_message*/ address _sender)
    public
    view
    virtual
    returns (bool)
  {
    return _sender == address(this);
  }

  /**
   * @notice Checks if the path initialization is allowed based on the provided origin.
   * @param origin The origin information containing the source endpoint and sender address.
   * @return Whether the path has been initialized.
   *
   * @dev This indicates to the endpoint that the OApp has enabled msgs for this particular path to be received.
   * @dev This defaults to assuming if a peer has been set, its initialized.
   * Can be overridden by the OApp if there is other logic to determine this.
   */
  function allowInitializePath(Origin calldata origin) public view virtual returns (bool) {
    return peers[origin.srcEid] == origin.sender;
  }

  /**
   * @notice Retrieves the next nonce for a given source endpoint and sender address.
   * @dev _srcEid The source endpoint ID.
   * @dev _sender The sender address.
   * @return nonce The next nonce.
   *
   * @dev The path nonce starts from 1. If 0 is returned it means that there is NO nonce ordered enforcement.
   * @dev Is required by the off-chain executor to determine the OApp expects msg execution is ordered.
   * @dev This is also enforced by the OApp.
   * @dev By default this is NOT enabled. ie. nextNonce is hardcoded to return 0.
   */
  function nextNonce(uint32, /*_srcEid*/ bytes32 /*_sender*/ ) public view virtual returns (uint64 nonce) {
    return 0;
  }

  /**
   * @dev Entry point for receiving messages or packets from the endpoint.
   * @param _origin The origin information containing the source endpoint and sender address.
   *  - srcEid: The source chain endpoint ID.
   *  - sender: The sender address on the src chain.
   *  - nonce: The nonce of the message.
   * @param _guid The unique identifier for the received LayerZero message.
   * @param _message The payload of the received message.
   * @param _executor The address of the executor for the received message.
   * @param _extraData Additional arbitrary data provided by the corresponding executor.
   *
   * @dev Entry point for receiving msg/packet from the LayerZero endpoint.
   */
  function lzReceive(
    Origin calldata _origin,
    bytes32 _guid,
    bytes calldata _message,
    address _executor,
    bytes calldata _extraData
  ) public payable virtual {
    // Ensures that only the endpoint can attempt to lzReceive() messages to this OApp.
    if (address(endpoint) != msg.sender) revert OnlyEndpoint(msg.sender);

    // Ensure that the sender matches the expected peer for the source endpoint.
    if (_getPeerOrRevert(_origin.srcEid) != _origin.sender) revert OnlyPeer(_origin.srcEid, _origin.sender);

    // Call the internal OApp implementation of lzReceive.
    _lzReceive(_origin, _guid, _message, _executor, _extraData);
  }

  /**
   * @dev Internal function to implement lzReceive logic without needing to copy the basic parameter validation.
   */
  function _lzReceive(
    Origin calldata _origin,
    bytes32 _guid,
    bytes calldata _message,
    address _executor,
    bytes calldata _extraData
  ) internal virtual;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {
  MessagingParams,
  MessagingFee,
  MessagingReceipt
} from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OAppSender
 * @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
 */
abstract contract OAppSender is OAppCore {
  using SafeERC20 for IERC20;

  // Custom error messages
  error NotEnoughNative(uint256 msgValue);
  error LzTokenUnavailable();

  // @dev The version of the OAppSender implementation.
  // @dev Version is bumped when changes are made to this contract.
  uint64 internal constant SENDER_VERSION = 1;

  /**
   * @notice Retrieves the OApp version information.
   * @return senderVersion The version of the OAppSender.sol contract.
   * @return receiverVersion The version of the OAppReceiver.sol contract.
   *
   * @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
   * ie. this is a SEND only OApp.
   * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct
   * versions
   */
  function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
    return (SENDER_VERSION, 0);
  }

  /**
   * @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
   * @param _dstEid The destination endpoint ID.
   * @param _message The message payload.
   * @param _options Additional options for the message.
   * @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
   * @return fee The calculated MessagingFee for the message.
   *      - nativeFee: The native fee for the message.
   *      - lzTokenFee: The LZ token fee for the message.
   */
  function _quote(uint32 _dstEid, bytes memory _message, bytes memory _options, bool _payInLzToken)
    internal
    view
    virtual
    returns (MessagingFee memory fee)
  {
    return endpoint.quote(
      MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken), address(this)
    );
  }

  /**
   * @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
   * @param _dstEid The destination endpoint ID.
   * @param _message The message payload.
   * @param _options Additional options for the message.
   * @param _fee The calculated LayerZero fee for the message.
   *      - nativeFee: The native fee.
   *      - lzTokenFee: The lzToken fee.
   * @param _refundAddress The address to receive any excess fee values sent to the endpoint.
   * @return receipt The receipt for the sent message.
   *      - guid: The unique identifier for the sent message.
   *      - nonce: The nonce of the sent message.
   *      - fee: The LayerZero fee incurred for the message.
   */
  function _lzSend(
    uint32 _dstEid,
    bytes memory _message,
    bytes memory _options,
    MessagingFee memory _fee,
    address _refundAddress
  ) internal virtual returns (MessagingReceipt memory receipt) {
    // @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
    uint256 messageValue = _payNative(_fee.nativeFee);
    if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);

    return endpoint
      // solhint-disable-next-line check-send-result
      .send{ value: messageValue }(
      MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0), _refundAddress
    );
  }

  /**
   * @dev Internal function to pay the native fee associated with the message.
   * @param _nativeFee The native fee to be paid.
   * @return nativeFee The amount of native currency paid.
   *
   * @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
   * this will need to be overridden because msg.value would contain multiple lzFees.
   * @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
   * @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
   * @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
   */
  function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
    if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
    return _nativeFee;
  }

  /**
   * @dev Internal function to pay the LZ token fee associated with the message.
   * @param _lzTokenFee The LZ token fee to be paid.
   *
   * @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
   * @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
   */
  function _payLzToken(uint256 _lzTokenFee) internal virtual {
    // @dev Cannot cache the token because it is not immutable in the endpoint.
    address lzToken = endpoint.lzToken();
    if (lzToken == address(0)) revert LzTokenUnavailable();

    // Pay LZ token fee by sending tokens to the endpoint.
    IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { HeroOFTX, OApp } from "./../HeroOFTX.sol";

import { ERC721 } from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import { IERC721Receiver } from "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";

/**
 * @title OFT721
 * @notice ERC721 + LZv2
 */
abstract contract OFT721 is HeroOFTX, ERC721, IERC721Receiver {
  error NFTOwnerIsNotContract();

  string internal contractURIJsonUTF8;

  constructor(
    string memory _name,
    string memory _symbol,
    string memory _contractURI,
    address _owner,
    address _localLzEndpoint,
    uint32 _lzGasLimit
  ) ERC721(_name, _symbol) HeroOFTX(_lzGasLimit) OApp(_localLzEndpoint, _owner) Ownable(_owner) {
    contractURIJsonUTF8 = _contractURI;
  }

  function contractURI() public view returns (string memory) {
    return contractURIJsonUTF8;
  }

  function _baseURI() internal view override returns (string memory) {
    return contractURI();
  }

  function _debit(uint256 _amountOrId, uint256) internal override returns (uint256 _amountSendingOrId_) {
    _transfer(msg.sender, address(this), _amountOrId);

    return _amountOrId;
  }

  function _credit(address _to, uint256 _value, bool) internal override returns (uint256) {
    bool exists = _exists(_value);

    if (exists && _ownerOf(_value) != address(this)) revert NFTOwnerIsNotContract();

    if (!exists) {
      _safeMint(_to, _value);
    } else {
      _safeTransfer(address(this), _to, _value);
    }

    return _value;
  }

  function _exists(uint256 _tokenId) internal view returns (bool) {
    return _ownerOf(_tokenId) != address(0);
  }

  function onERC721Received(address, address, uint256, bytes calldata) external pure override returns (bytes4) {
    return IERC721Receiver.onERC721Received.selector;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { BytesLib } from "solidity-bytes-utils/contracts/BytesLib.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";

import { ExecutorOptions } from "@layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/ExecutorOptions.sol";
import { DVNOptions } from "@layerzerolabs/lz-evm-messagelib-v2/contracts/uln/libs/DVNOptions.sol";

/**
 * @title OptionsBuilder
 * @dev Library for building and encoding various message options.
 */
library OptionsBuilder {
  using SafeCast for uint256;
  using BytesLib for bytes;

  // Constants for options types
  uint16 internal constant TYPE_1 = 1; // legacy options type 1
  uint16 internal constant TYPE_2 = 2; // legacy options type 2
  uint16 internal constant TYPE_3 = 3;

  // Custom error message
  error InvalidSize(uint256 max, uint256 actual);
  error InvalidOptionType(uint16 optionType);

  // Modifier to ensure only options of type 3 are used
  modifier onlyType3(bytes memory _options) {
    if (_options.toUint16(0) != TYPE_3) revert InvalidOptionType(_options.toUint16(0));
    _;
  }

  /**
   * @dev Creates a new options container with type 3.
   * @return options The newly created options container.
   */
  function newOptions() internal pure returns (bytes memory) {
    return abi.encodePacked(TYPE_3);
  }

  /**
   * @dev Adds an executor LZ receive option to the existing options.
   * @param _options The existing options container.
   * @param _gas The gasLimit used on the lzReceive() function in the OApp.
   * @param _value The msg.value passed to the lzReceive() function in the OApp.
   * @return options The updated options container.
   *
   * @dev When multiples of this option are added, they are summed by the executor
   * eg. if (_gas: 200k, and _value: 1 ether) AND (_gas: 100k, _value: 0.5 ether) are sent in an option to the
   * LayerZeroEndpoint,
   * that becomes (300k, 1.5 ether) when the message is executed on the remote lzReceive() function.
   */
  function addExecutorLzReceiveOption(bytes memory _options, uint128 _gas, uint128 _value)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    bytes memory option = ExecutorOptions.encodeLzReceiveOption(_gas, _value);
    return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_LZRECEIVE, option);
  }

  /**
   * @dev Adds an executor native drop option to the existing options.
   * @param _options The existing options container.
   * @param _amount The amount for the native value that is airdropped to the 'receiver'.
   * @param _receiver The receiver address for the native drop option.
   * @return options The updated options container.
   *
   * @dev When multiples of this option are added, they are summed by the executor on the remote chain.
   */
  function addExecutorNativeDropOption(bytes memory _options, uint128 _amount, bytes32 _receiver)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    bytes memory option = ExecutorOptions.encodeNativeDropOption(_amount, _receiver);
    return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_NATIVE_DROP, option);
  }

  /**
   * @dev Adds an executor LZ compose option to the existing options.
   * @param _options The existing options container.
   * @param _index The index for the lzCompose() function call.
   * @param _gas The gasLimit for the lzCompose() function call.
   * @param _value The msg.value for the lzCompose() function call.
   * @return options The updated options container.
   *
   * @dev When multiples of this option are added, they are summed PER index by the executor on the remote chain.
   * @dev If the OApp sends N lzCompose calls on the remote, you must provide N incremented indexes starting with 0.
   * ie. When your remote OApp composes (N = 3) messages, you must set this option for index 0,1,2
   */
  function addExecutorLzComposeOption(bytes memory _options, uint16 _index, uint128 _gas, uint128 _value)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    bytes memory option = ExecutorOptions.encodeLzComposeOption(_index, _gas, _value);
    return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_LZCOMPOSE, option);
  }

  /**
   * @dev Adds an executor ordered execution option to the existing options.
   * @param _options The existing options container.
   * @return options The updated options container.
   */
  function addExecutorOrderedExecutionOption(bytes memory _options)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_ORDERED_EXECUTION, bytes(""));
  }

  /**
   * @dev Adds a DVN pre-crime option to the existing options.
   * @param _options The existing options container.
   * @param _dvnIdx The DVN index for the pre-crime option.
   * @return options The updated options container.
   */
  function addDVNPreCrimeOption(bytes memory _options, uint8 _dvnIdx)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    return addDVNOption(_options, _dvnIdx, DVNOptions.OPTION_TYPE_PRECRIME, bytes(""));
  }

  /**
   * @dev Adds an executor option to the existing options.
   * @param _options The existing options container.
   * @param _optionType The type of the executor option.
   * @param _option The encoded data for the executor option.
   * @return options The updated options container.
   */
  function addExecutorOption(bytes memory _options, uint8 _optionType, bytes memory _option)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    return abi.encodePacked(
      _options,
      ExecutorOptions.WORKER_ID,
      _option.length.toUint16() + 1, // +1 for optionType
      _optionType,
      _option
    );
  }

  /**
   * @dev Adds a DVN option to the existing options.
   * @param _options The existing options container.
   * @param _dvnIdx The DVN index for the DVN option.
   * @param _optionType The type of the DVN option.
   * @param _option The encoded data for the DVN option.
   * @return options The updated options container.
   */
  function addDVNOption(bytes memory _options, uint8 _dvnIdx, uint8 _optionType, bytes memory _option)
    internal
    pure
    onlyType3(_options)
    returns (bytes memory)
  {
    return abi.encodePacked(
      _options,
      DVNOptions.WORKER_ID,
      _option.length.toUint16() + 2, // +2 for optionType and dvnIdx
      _dvnIdx,
      _optionType,
      _option
    );
  }

  /**
   * @dev Encodes legacy options of type 1.
   * @param _executionGas The gasLimit value passed to lzReceive().
   * @return legacyOptions The encoded legacy options.
   */
  function encodeLegacyOptionsType1(uint256 _executionGas) internal pure returns (bytes memory) {
    if (_executionGas > type(uint128).max) revert InvalidSize(type(uint128).max, _executionGas);
    return abi.encodePacked(TYPE_1, _executionGas);
  }

  /**
   * @dev Encodes legacy options of type 2.
   * @param _executionGas The gasLimit value passed to lzReceive().
   * @param _nativeForDst The amount of native air dropped to the receiver.
   * @param _receiver The _nativeForDst receiver address.
   * @return legacyOptions The encoded legacy options of type 2.
   */
  function encodeLegacyOptionsType2(
    uint256 _executionGas,
    uint256 _nativeForDst,
    bytes memory _receiver // @dev Use bytes instead of bytes32 in legacy type 2 for _receiver.
  ) internal pure returns (bytes memory) {
    if (_executionGas > type(uint128).max) revert InvalidSize(type(uint128).max, _executionGas);
    if (_nativeForDst > type(uint128).max) revert InvalidSize(type(uint128).max, _nativeForDst);
    if (_receiver.length > 32) revert InvalidSize(32, _receiver.length);
    return abi.encodePacked(TYPE_2, _executionGas, _nativeForDst, _receiver);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import { Context } from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  /**
   * @dev The caller account is not authorized to perform an operation.
   */
  error OwnableUnauthorizedAccount(address account);

  /**
   * @dev The owner is not a valid owner account. (eg. `address(0)`)
   */
  error OwnableInvalidOwner(address owner);

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
   */
  constructor(address initialOwner) {
    if (initialOwner == address(0)) {
      revert OwnableInvalidOwner(address(0));
    }
    _transferOwnership(initialOwner);
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    _checkOwner();
    _;
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if the sender is not the owner.
   */
  function _checkOwner() internal view virtual {
    if (owner() != _msgSender()) {
      revert OwnableUnauthorizedAccount(_msgSender());
    }
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby disabling any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    _transferOwnership(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    if (newOwner == address(0)) {
      revert OwnableInvalidOwner(address(0));
    }
    _transferOwnership(newOwner);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Internal function without access restriction.
   */
  function _transferOwnership(address newOwner) internal virtual {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
  /**
   * @dev Value doesn't fit in an uint of `bits` size.
   */
  error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

  /**
   * @dev An int value doesn't fit in an uint of `bits` size.
   */
  error SafeCastOverflowedIntToUint(int256 value);

  /**
   * @dev Value doesn't fit in an int of `bits` size.
   */
  error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

  /**
   * @dev An uint value doesn't fit in an int of `bits` size.
   */
  error SafeCastOverflowedUintToInt(uint256 value);

  /**
   * @dev Returns the downcasted uint248 from uint256, reverting on
   * overflow (when the input is greater than largest uint248).
   *
   * Counterpart to Solidity's `uint248` operator.
   *
   * Requirements:
   *
   * - input must fit into 248 bits
   */
  function toUint248(uint256 value) internal pure returns (uint248) {
    if (value > type(uint248).max) {
      revert SafeCastOverflowedUintDowncast(248, value);
    }
    return uint248(value);
  }

  /**
   * @dev Returns the downcasted uint240 from uint256, reverting on
   * overflow (when the input is greater than largest uint240).
   *
   * Counterpart to Solidity's `uint240` operator.
   *
   * Requirements:
   *
   * - input must fit into 240 bits
   */
  function toUint240(uint256 value) internal pure returns (uint240) {
    if (value > type(uint240).max) {
      revert SafeCastOverflowedUintDowncast(240, value);
    }
    return uint240(value);
  }

  /**
   * @dev Returns the downcasted uint232 from uint256, reverting on
   * overflow (when the input is greater than largest uint232).
   *
   * Counterpart to Solidity's `uint232` operator.
   *
   * Requirements:
   *
   * - input must fit into 232 bits
   */
  function toUint232(uint256 value) internal pure returns (uint232) {
    if (value > type(uint232).max) {
      revert SafeCastOverflowedUintDowncast(232, value);
    }
    return uint232(value);
  }

  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    if (value > type(uint224).max) {
      revert SafeCastOverflowedUintDowncast(224, value);
    }
    return uint224(value);
  }

  /**
   * @dev Returns the downcasted uint216 from uint256, reverting on
   * overflow (when the input is greater than largest uint216).
   *
   * Counterpart to Solidity's `uint216` operator.
   *
   * Requirements:
   *
   * - input must fit into 216 bits
   */
  function toUint216(uint256 value) internal pure returns (uint216) {
    if (value > type(uint216).max) {
      revert SafeCastOverflowedUintDowncast(216, value);
    }
    return uint216(value);
  }

  /**
   * @dev Returns the downcasted uint208 from uint256, reverting on
   * overflow (when the input is greater than largest uint208).
   *
   * Counterpart to Solidity's `uint208` operator.
   *
   * Requirements:
   *
   * - input must fit into 208 bits
   */
  function toUint208(uint256 value) internal pure returns (uint208) {
    if (value > type(uint208).max) {
      revert SafeCastOverflowedUintDowncast(208, value);
    }
    return uint208(value);
  }

  /**
   * @dev Returns the downcasted uint200 from uint256, reverting on
   * overflow (when the input is greater than largest uint200).
   *
   * Counterpart to Solidity's `uint200` operator.
   *
   * Requirements:
   *
   * - input must fit into 200 bits
   */
  function toUint200(uint256 value) internal pure returns (uint200) {
    if (value > type(uint200).max) {
      revert SafeCastOverflowedUintDowncast(200, value);
    }
    return uint200(value);
  }

  /**
   * @dev Returns the downcasted uint192 from uint256, reverting on
   * overflow (when the input is greater than largest uint192).
   *
   * Counterpart to Solidity's `uint192` operator.
   *
   * Requirements:
   *
   * - input must fit into 192 bits
   */
  function toUint192(uint256 value) internal pure returns (uint192) {
    if (value > type(uint192).max) {
      revert SafeCastOverflowedUintDowncast(192, value);
    }
    return uint192(value);
  }

  /**
   * @dev Returns the downcasted uint184 from uint256, reverting on
   * overflow (when the input is greater than largest uint184).
   *
   * Counterpart to Solidity's `uint184` operator.
   *
   * Requirements:
   *
   * - input must fit into 184 bits
   */
  function toUint184(uint256 value) internal pure returns (uint184) {
    if (value > type(uint184).max) {
      revert SafeCastOverflowedUintDowncast(184, value);
    }
    return uint184(value);
  }

  /**
   * @dev Returns the downcasted uint176 from uint256, reverting on
   * overflow (when the input is greater than largest uint176).
   *
   * Counterpart to Solidity's `uint176` operator.
   *
   * Requirements:
   *
   * - input must fit into 176 bits
   */
  function toUint176(uint256 value) internal pure returns (uint176) {
    if (value > type(uint176).max) {
      revert SafeCastOverflowedUintDowncast(176, value);
    }
    return uint176(value);
  }

  /**
   * @dev Returns the downcasted uint168 from uint256, reverting on
   * overflow (when the input is greater than largest uint168).
   *
   * Counterpart to Solidity's `uint168` operator.
   *
   * Requirements:
   *
   * - input must fit into 168 bits
   */
  function toUint168(uint256 value) internal pure returns (uint168) {
    if (value > type(uint168).max) {
      revert SafeCastOverflowedUintDowncast(168, value);
    }
    return uint168(value);
  }

  /**
   * @dev Returns the downcasted uint160 from uint256, reverting on
   * overflow (when the input is greater than largest uint160).
   *
   * Counterpart to Solidity's `uint160` operator.
   *
   * Requirements:
   *
   * - input must fit into 160 bits
   */
  function toUint160(uint256 value) internal pure returns (uint160) {
    if (value > type(uint160).max) {
      revert SafeCastOverflowedUintDowncast(160, value);
    }
    return uint160(value);
  }

  /**
   * @dev Returns the downcasted uint152 from uint256, reverting on
   * overflow (when the input is greater than largest uint152).
   *
   * Counterpart to Solidity's `uint152` operator.
   *
   * Requirements:
   *
   * - input must fit into 152 bits
   */
  function toUint152(uint256 value) internal pure returns (uint152) {
    if (value > type(uint152).max) {
      revert SafeCastOverflowedUintDowncast(152, value);
    }
    return uint152(value);
  }

  /**
   * @dev Returns the downcasted uint144 from uint256, reverting on
   * overflow (when the input is greater than largest uint144).
   *
   * Counterpart to Solidity's `uint144` operator.
   *
   * Requirements:
   *
   * - input must fit into 144 bits
   */
  function toUint144(uint256 value) internal pure returns (uint144) {
    if (value > type(uint144).max) {
      revert SafeCastOverflowedUintDowncast(144, value);
    }
    return uint144(value);
  }

  /**
   * @dev Returns the downcasted uint136 from uint256, reverting on
   * overflow (when the input is greater than largest uint136).
   *
   * Counterpart to Solidity's `uint136` operator.
   *
   * Requirements:
   *
   * - input must fit into 136 bits
   */
  function toUint136(uint256 value) internal pure returns (uint136) {
    if (value > type(uint136).max) {
      revert SafeCastOverflowedUintDowncast(136, value);
    }
    return uint136(value);
  }

  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    if (value > type(uint128).max) {
      revert SafeCastOverflowedUintDowncast(128, value);
    }
    return uint128(value);
  }

  /**
   * @dev Returns the downcasted uint120 from uint256, reverting on
   * overflow (when the input is greater than largest uint120).
   *
   * Counterpart to Solidity's `uint120` operator.
   *
   * Requirements:
   *
   * - input must fit into 120 bits
   */
  function toUint120(uint256 value) internal pure returns (uint120) {
    if (value > type(uint120).max) {
      revert SafeCastOverflowedUintDowncast(120, value);
    }
    return uint120(value);
  }

  /**
   * @dev Returns the downcasted uint112 from uint256, reverting on
   * overflow (when the input is greater than largest uint112).
   *
   * Counterpart to Solidity's `uint112` operator.
   *
   * Requirements:
   *
   * - input must fit into 112 bits
   */
  function toUint112(uint256 value) internal pure returns (uint112) {
    if (value > type(uint112).max) {
      revert SafeCastOverflowedUintDowncast(112, value);
    }
    return uint112(value);
  }

  /**
   * @dev Returns the downcasted uint104 from uint256, reverting on
   * overflow (when the input is greater than largest uint104).
   *
   * Counterpart to Solidity's `uint104` operator.
   *
   * Requirements:
   *
   * - input must fit into 104 bits
   */
  function toUint104(uint256 value) internal pure returns (uint104) {
    if (value > type(uint104).max) {
      revert SafeCastOverflowedUintDowncast(104, value);
    }
    return uint104(value);
  }

  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    if (value > type(uint96).max) {
      revert SafeCastOverflowedUintDowncast(96, value);
    }
    return uint96(value);
  }

  /**
   * @dev Returns the downcasted uint88 from uint256, reverting on
   * overflow (when the input is greater than largest uint88).
   *
   * Counterpart to Solidity's `uint88` operator.
   *
   * Requirements:
   *
   * - input must fit into 88 bits
   */
  function toUint88(uint256 value) internal pure returns (uint88) {
    if (value > type(uint88).max) {
      revert SafeCastOverflowedUintDowncast(88, value);
    }
    return uint88(value);
  }

  /**
   * @dev Returns the downcasted uint80 from uint256, reverting on
   * overflow (when the input is greater than largest uint80).
   *
   * Counterpart to Solidity's `uint80` operator.
   *
   * Requirements:
   *
   * - input must fit into 80 bits
   */
  function toUint80(uint256 value) internal pure returns (uint80) {
    if (value > type(uint80).max) {
      revert SafeCastOverflowedUintDowncast(80, value);
    }
    return uint80(value);
  }

  /**
   * @dev Returns the downcasted uint72 from uint256, reverting on
   * overflow (when the input is greater than largest uint72).
   *
   * Counterpart to Solidity's `uint72` operator.
   *
   * Requirements:
   *
   * - input must fit into 72 bits
   */
  function toUint72(uint256 value) internal pure returns (uint72) {
    if (value > type(uint72).max) {
      revert SafeCastOverflowedUintDowncast(72, value);
    }
    return uint72(value);
  }

  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    if (value > type(uint64).max) {
      revert SafeCastOverflowedUintDowncast(64, value);
    }
    return uint64(value);
  }

  /**
   * @dev Returns the downcasted uint56 from uint256, reverting on
   * overflow (when the input is greater than largest uint56).
   *
   * Counterpart to Solidity's `uint56` operator.
   *
   * Requirements:
   *
   * - input must fit into 56 bits
   */
  function toUint56(uint256 value) internal pure returns (uint56) {
    if (value > type(uint56).max) {
      revert SafeCastOverflowedUintDowncast(56, value);
    }
    return uint56(value);
  }

  /**
   * @dev Returns the downcasted uint48 from uint256, reverting on
   * overflow (when the input is greater than largest uint48).
   *
   * Counterpart to Solidity's `uint48` operator.
   *
   * Requirements:
   *
   * - input must fit into 48 bits
   */
  function toUint48(uint256 value) internal pure returns (uint48) {
    if (value > type(uint48).max) {
      revert SafeCastOverflowedUintDowncast(48, value);
    }
    return uint48(value);
  }

  /**
   * @dev Returns the downcasted uint40 from uint256, reverting on
   * overflow (when the input is greater than largest uint40).
   *
   * Counterpart to Solidity's `uint40` operator.
   *
   * Requirements:
   *
   * - input must fit into 40 bits
   */
  function toUint40(uint256 value) internal pure returns (uint40) {
    if (value > type(uint40).max) {
      revert SafeCastOverflowedUintDowncast(40, value);
    }
    return uint40(value);
  }

  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    if (value > type(uint32).max) {
      revert SafeCastOverflowedUintDowncast(32, value);
    }
    return uint32(value);
  }

  /**
   * @dev Returns the downcasted uint24 from uint256, reverting on
   * overflow (when the input is greater than largest uint24).
   *
   * Counterpart to Solidity's `uint24` operator.
   *
   * Requirements:
   *
   * - input must fit into 24 bits
   */
  function toUint24(uint256 value) internal pure returns (uint24) {
    if (value > type(uint24).max) {
      revert SafeCastOverflowedUintDowncast(24, value);
    }
    return uint24(value);
  }

  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    if (value > type(uint16).max) {
      revert SafeCastOverflowedUintDowncast(16, value);
    }
    return uint16(value);
  }

  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    if (value > type(uint8).max) {
      revert SafeCastOverflowedUintDowncast(8, value);
    }
    return uint8(value);
  }

  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    if (value < 0) {
      revert SafeCastOverflowedIntToUint(value);
    }
    return uint256(value);
  }

  /**
   * @dev Returns the downcasted int248 from int256, reverting on
   * overflow (when the input is less than smallest int248 or
   * greater than largest int248).
   *
   * Counterpart to Solidity's `int248` operator.
   *
   * Requirements:
   *
   * - input must fit into 248 bits
   */
  function toInt248(int256 value) internal pure returns (int248 downcasted) {
    downcasted = int248(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(248, value);
    }
  }

  /**
   * @dev Returns the downcasted int240 from int256, reverting on
   * overflow (when the input is less than smallest int240 or
   * greater than largest int240).
   *
   * Counterpart to Solidity's `int240` operator.
   *
   * Requirements:
   *
   * - input must fit into 240 bits
   */
  function toInt240(int256 value) internal pure returns (int240 downcasted) {
    downcasted = int240(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(240, value);
    }
  }

  /**
   * @dev Returns the downcasted int232 from int256, reverting on
   * overflow (when the input is less than smallest int232 or
   * greater than largest int232).
   *
   * Counterpart to Solidity's `int232` operator.
   *
   * Requirements:
   *
   * - input must fit into 232 bits
   */
  function toInt232(int256 value) internal pure returns (int232 downcasted) {
    downcasted = int232(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(232, value);
    }
  }

  /**
   * @dev Returns the downcasted int224 from int256, reverting on
   * overflow (when the input is less than smallest int224 or
   * greater than largest int224).
   *
   * Counterpart to Solidity's `int224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toInt224(int256 value) internal pure returns (int224 downcasted) {
    downcasted = int224(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(224, value);
    }
  }

  /**
   * @dev Returns the downcasted int216 from int256, reverting on
   * overflow (when the input is less than smallest int216 or
   * greater than largest int216).
   *
   * Counterpart to Solidity's `int216` operator.
   *
   * Requirements:
   *
   * - input must fit into 216 bits
   */
  function toInt216(int256 value) internal pure returns (int216 downcasted) {
    downcasted = int216(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(216, value);
    }
  }

  /**
   * @dev Returns the downcasted int208 from int256, reverting on
   * overflow (when the input is less than smallest int208 or
   * greater than largest int208).
   *
   * Counterpart to Solidity's `int208` operator.
   *
   * Requirements:
   *
   * - input must fit into 208 bits
   */
  function toInt208(int256 value) internal pure returns (int208 downcasted) {
    downcasted = int208(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(208, value);
    }
  }

  /**
   * @dev Returns the downcasted int200 from int256, reverting on
   * overflow (when the input is less than smallest int200 or
   * greater than largest int200).
   *
   * Counterpart to Solidity's `int200` operator.
   *
   * Requirements:
   *
   * - input must fit into 200 bits
   */
  function toInt200(int256 value) internal pure returns (int200 downcasted) {
    downcasted = int200(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(200, value);
    }
  }

  /**
   * @dev Returns the downcasted int192 from int256, reverting on
   * overflow (when the input is less than smallest int192 or
   * greater than largest int192).
   *
   * Counterpart to Solidity's `int192` operator.
   *
   * Requirements:
   *
   * - input must fit into 192 bits
   */
  function toInt192(int256 value) internal pure returns (int192 downcasted) {
    downcasted = int192(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(192, value);
    }
  }

  /**
   * @dev Returns the downcasted int184 from int256, reverting on
   * overflow (when the input is less than smallest int184 or
   * greater than largest int184).
   *
   * Counterpart to Solidity's `int184` operator.
   *
   * Requirements:
   *
   * - input must fit into 184 bits
   */
  function toInt184(int256 value) internal pure returns (int184 downcasted) {
    downcasted = int184(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(184, value);
    }
  }

  /**
   * @dev Returns the downcasted int176 from int256, reverting on
   * overflow (when the input is less than smallest int176 or
   * greater than largest int176).
   *
   * Counterpart to Solidity's `int176` operator.
   *
   * Requirements:
   *
   * - input must fit into 176 bits
   */
  function toInt176(int256 value) internal pure returns (int176 downcasted) {
    downcasted = int176(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(176, value);
    }
  }

  /**
   * @dev Returns the downcasted int168 from int256, reverting on
   * overflow (when the input is less than smallest int168 or
   * greater than largest int168).
   *
   * Counterpart to Solidity's `int168` operator.
   *
   * Requirements:
   *
   * - input must fit into 168 bits
   */
  function toInt168(int256 value) internal pure returns (int168 downcasted) {
    downcasted = int168(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(168, value);
    }
  }

  /**
   * @dev Returns the downcasted int160 from int256, reverting on
   * overflow (when the input is less than smallest int160 or
   * greater than largest int160).
   *
   * Counterpart to Solidity's `int160` operator.
   *
   * Requirements:
   *
   * - input must fit into 160 bits
   */
  function toInt160(int256 value) internal pure returns (int160 downcasted) {
    downcasted = int160(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(160, value);
    }
  }

  /**
   * @dev Returns the downcasted int152 from int256, reverting on
   * overflow (when the input is less than smallest int152 or
   * greater than largest int152).
   *
   * Counterpart to Solidity's `int152` operator.
   *
   * Requirements:
   *
   * - input must fit into 152 bits
   */
  function toInt152(int256 value) internal pure returns (int152 downcasted) {
    downcasted = int152(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(152, value);
    }
  }

  /**
   * @dev Returns the downcasted int144 from int256, reverting on
   * overflow (when the input is less than smallest int144 or
   * greater than largest int144).
   *
   * Counterpart to Solidity's `int144` operator.
   *
   * Requirements:
   *
   * - input must fit into 144 bits
   */
  function toInt144(int256 value) internal pure returns (int144 downcasted) {
    downcasted = int144(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(144, value);
    }
  }

  /**
   * @dev Returns the downcasted int136 from int256, reverting on
   * overflow (when the input is less than smallest int136 or
   * greater than largest int136).
   *
   * Counterpart to Solidity's `int136` operator.
   *
   * Requirements:
   *
   * - input must fit into 136 bits
   */
  function toInt136(int256 value) internal pure returns (int136 downcasted) {
    downcasted = int136(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(136, value);
    }
  }

  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toInt128(int256 value) internal pure returns (int128 downcasted) {
    downcasted = int128(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(128, value);
    }
  }

  /**
   * @dev Returns the downcasted int120 from int256, reverting on
   * overflow (when the input is less than smallest int120 or
   * greater than largest int120).
   *
   * Counterpart to Solidity's `int120` operator.
   *
   * Requirements:
   *
   * - input must fit into 120 bits
   */
  function toInt120(int256 value) internal pure returns (int120 downcasted) {
    downcasted = int120(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(120, value);
    }
  }

  /**
   * @dev Returns the downcasted int112 from int256, reverting on
   * overflow (when the input is less than smallest int112 or
   * greater than largest int112).
   *
   * Counterpart to Solidity's `int112` operator.
   *
   * Requirements:
   *
   * - input must fit into 112 bits
   */
  function toInt112(int256 value) internal pure returns (int112 downcasted) {
    downcasted = int112(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(112, value);
    }
  }

  /**
   * @dev Returns the downcasted int104 from int256, reverting on
   * overflow (when the input is less than smallest int104 or
   * greater than largest int104).
   *
   * Counterpart to Solidity's `int104` operator.
   *
   * Requirements:
   *
   * - input must fit into 104 bits
   */
  function toInt104(int256 value) internal pure returns (int104 downcasted) {
    downcasted = int104(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(104, value);
    }
  }

  /**
   * @dev Returns the downcasted int96 from int256, reverting on
   * overflow (when the input is less than smallest int96 or
   * greater than largest int96).
   *
   * Counterpart to Solidity's `int96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toInt96(int256 value) internal pure returns (int96 downcasted) {
    downcasted = int96(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(96, value);
    }
  }

  /**
   * @dev Returns the downcasted int88 from int256, reverting on
   * overflow (when the input is less than smallest int88 or
   * greater than largest int88).
   *
   * Counterpart to Solidity's `int88` operator.
   *
   * Requirements:
   *
   * - input must fit into 88 bits
   */
  function toInt88(int256 value) internal pure returns (int88 downcasted) {
    downcasted = int88(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(88, value);
    }
  }

  /**
   * @dev Returns the downcasted int80 from int256, reverting on
   * overflow (when the input is less than smallest int80 or
   * greater than largest int80).
   *
   * Counterpart to Solidity's `int80` operator.
   *
   * Requirements:
   *
   * - input must fit into 80 bits
   */
  function toInt80(int256 value) internal pure returns (int80 downcasted) {
    downcasted = int80(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(80, value);
    }
  }

  /**
   * @dev Returns the downcasted int72 from int256, reverting on
   * overflow (when the input is less than smallest int72 or
   * greater than largest int72).
   *
   * Counterpart to Solidity's `int72` operator.
   *
   * Requirements:
   *
   * - input must fit into 72 bits
   */
  function toInt72(int256 value) internal pure returns (int72 downcasted) {
    downcasted = int72(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(72, value);
    }
  }

  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toInt64(int256 value) internal pure returns (int64 downcasted) {
    downcasted = int64(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(64, value);
    }
  }

  /**
   * @dev Returns the downcasted int56 from int256, reverting on
   * overflow (when the input is less than smallest int56 or
   * greater than largest int56).
   *
   * Counterpart to Solidity's `int56` operator.
   *
   * Requirements:
   *
   * - input must fit into 56 bits
   */
  function toInt56(int256 value) internal pure returns (int56 downcasted) {
    downcasted = int56(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(56, value);
    }
  }

  /**
   * @dev Returns the downcasted int48 from int256, reverting on
   * overflow (when the input is less than smallest int48 or
   * greater than largest int48).
   *
   * Counterpart to Solidity's `int48` operator.
   *
   * Requirements:
   *
   * - input must fit into 48 bits
   */
  function toInt48(int256 value) internal pure returns (int48 downcasted) {
    downcasted = int48(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(48, value);
    }
  }

  /**
   * @dev Returns the downcasted int40 from int256, reverting on
   * overflow (when the input is less than smallest int40 or
   * greater than largest int40).
   *
   * Counterpart to Solidity's `int40` operator.
   *
   * Requirements:
   *
   * - input must fit into 40 bits
   */
  function toInt40(int256 value) internal pure returns (int40 downcasted) {
    downcasted = int40(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(40, value);
    }
  }

  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toInt32(int256 value) internal pure returns (int32 downcasted) {
    downcasted = int32(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(32, value);
    }
  }

  /**
   * @dev Returns the downcasted int24 from int256, reverting on
   * overflow (when the input is less than smallest int24 or
   * greater than largest int24).
   *
   * Counterpart to Solidity's `int24` operator.
   *
   * Requirements:
   *
   * - input must fit into 24 bits
   */
  function toInt24(int256 value) internal pure returns (int24 downcasted) {
    downcasted = int24(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(24, value);
    }
  }

  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toInt16(int256 value) internal pure returns (int16 downcasted) {
    downcasted = int16(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(16, value);
    }
  }

  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits
   */
  function toInt8(int256 value) internal pure returns (int8 downcasted) {
    downcasted = int8(value);
    if (downcasted != value) {
      revert SafeCastOverflowedIntDowncast(8, value);
    }
  }

  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    if (value > uint256(type(int256).max)) {
      revert SafeCastOverflowedUintToInt(value);
    }
    return int256(value);
  }
}