// SPDX-License-Identifier: Unlicensed

pragma solidity ^0.8.13;

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: weiValue}(
            data
        );
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

interface IERC20 {
    function totalSupply() external view returns (uint256);

    function balanceOf(address account) external view returns (uint256);

    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    function approve(address spender, uint256 amount) external returns (bool);

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );

    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);

    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);

    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);

    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);

    function getAmountsOut(uint256 amountIn, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);

    function getAmountsIn(uint256 amountOut, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);

    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

interface IUniswapV2Pair {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    event Transfer(address indexed from, address indexed to, uint256 value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint256);

    function balanceOf(address owner) external view returns (uint256);

    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    function approve(address spender, uint256 value) external returns (bool);

    function transfer(address to, uint256 value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint256);

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(
        address indexed sender,
        uint256 amount0,
        uint256 amount1,
        address indexed to
    );
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint256);

    function factory() external view returns (address);

    function token0() external view returns (address);

    function token1() external view returns (address);

    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );

    function price0CumulativeLast() external view returns (uint256);

    function price1CumulativeLast() external view returns (uint256);

    function kLast() external view returns (uint256);

    function mint(address to) external returns (uint256 liquidity);

    function burn(address to)
        external
        returns (uint256 amount0, uint256 amount1);

    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        address to,
        bytes calldata data
    ) external;

    function skim(address to) external;

    function sync() external;

    function initialize(address, address) external;
}

contract DexterAI is Context, IERC20, Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using Address for address;

    struct Fees {
        uint256 reflectFee;
        uint256 liquidityFee;
        uint256 burnFee;
        uint256 donateFee;
       
    }

    IUniswapV2Router02 public immutable uniswapV2Router;
    // Pancake V2 Router 0x10ED43C718714eb63d5aA57B78B54704E256024E
    // Uniswap V2 Router 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
    // Quickswap V2 Router 0xa5E0829CaCEd8fFDD4De3c43696c57F7D7A678ff

    mapping(address => uint256) private _rOwned;
    mapping(address => uint256) private _tOwned;
    mapping(address => mapping(address => uint256)) private _allowances;
    mapping(address => bool) private _isExcludedFromFee;
    mapping(address => bool) private _isExcluded;
    
    address[] private _excluded;

    address private constant deadWallet =
        0x000000000000000000000000000000000000dEaD;
    address public donateWallet;
    
    

    uint256 private constant MAX = ~uint256(0);
    uint256 private constant _tTotal = 2 * 10**11 * 10**18; //200 billion
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 private _tFeeTotal;
    

    string private constant _name = "Dexter AI";
    string private constant _symbol = "DXAI";
    uint8 private constant _decimals = 18;

    uint256 private _reflectionFee = 5;
    uint256 private _liquidityTax = 2;
    uint256 private _burningFee = 3;
    uint256 private _donateTax = 5;
    

    event SwapAndLiquify(uint256, uint256, uint256, uint256);

    event ExcludeAccount(address);
    event IncludeAccount(address);
    event ChangeFees(uint256);
    event ExcludeFromFee(address);
    event IncludeInFee(address);
    event EmergencyWithdraw(uint256);
    

    constructor(
        address _router,
        address _donateWallet
        
    ) {
        uniswapV2Router = IUniswapV2Router02(_router);
        donateWallet = _donateWallet;
       
        _rOwned[owner()] = _rTotal;
        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[_router] = true;

        emit Transfer(address(0), owner(), _tTotal);
    }

    function name() external pure returns (string memory) {
        return _name;
    }

    function symbol() external pure returns (string memory) {
        return _symbol;
    }

    function decimals() external pure returns (uint8) {
        return _decimals;
    }

    function totalSupply() external pure override returns (uint256) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint256) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint256 amount)
        external
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender)
        external
        view
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount)
        external
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue)
        external
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue)
        external
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    function isExcluded(address account) external view returns (bool) {
        return _isExcluded[account];
    }

    function totalFees() external view returns (uint256) {
        return _tFeeTotal;
    }

    function reflect(uint256 tAmount) external {
        address sender = _msgSender();
        require(
            !_isExcluded[sender],
            "Excluded addresses cannot call this function"
        );
        (uint256 rAmount, , , , ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rTotal = _rTotal.sub(rAmount);
        _tFeeTotal = _tFeeTotal.add(tAmount);
    }

    function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
        external
        view
        returns (uint256)
    {
        require(tAmount <= _tTotal, "Amount must be less than supply");
        if (!deductTransferFee) {
            (uint256 rAmount, , , , ) = _getValues(tAmount);
            return rAmount;
        } else {
            (, uint256 rTransferAmount, , , ) = _getValues(tAmount);
            return rTransferAmount;
        }
    }

    function tokenFromReflection(uint256 rAmount)
        public
        view
        returns (uint256)
    {
        require(
            rAmount <= _rTotal,
            "Amount must be less than total reflections"
        );
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }

    function excludeAccount(address account) external onlyOwner {
        require(!_isExcluded[account], "Account is already excluded");
        if (_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
        emit ExcludeAccount(account);
    }

    function includeAccount(address account) external onlyOwner {
        require(_isExcluded[account], "Account is not excluded");
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
        emit IncludeAccount(account);
    }

    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) private {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        uint256 currentReflectionFee = _reflectionFee;
        uint256 currentLiquidityFee = _liquidityTax;
        uint256 currentBurnFee = _burningFee;
        uint256 currentDonateFee = _donateTax;
        

        

        
        if (_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]) {
            _reflectionFee = 0;
            _liquidityTax = 0;
            _burningFee = 0;
            _donateTax = 0;
            
        }

        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(sender, recipient, amount);
        } else {
            _transferStandard(sender, recipient, amount);
        }

        if (_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]) {
            _reflectionFee = currentReflectionFee;
            _liquidityTax = currentLiquidityFee;
            _burningFee = currentBurnFee;
            _donateTax = currentDonateFee;
            
        }
    }

    function _transferStandard(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            Fees memory rFees,
            uint256 tTransferAmount,
            Fees memory tFees
        ) = _getValues(tAmount);
        
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFees.reflectFee, tFees.reflectFee);
        _liquidityFee(rFees.liquidityFee, tFees.liquidityFee);
        _burnFee(rFees.burnFee, tFees.burnFee);
        _donateFee(rFees.donateFee, tFees.donateFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferToExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            Fees memory rFees,
            uint256 tTransferAmount,
            Fees memory tFees
        ) = _getValues(tAmount);
        
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFees.reflectFee, tFees.reflectFee);
        _liquidityFee(rFees.liquidityFee, tFees.liquidityFee);
        _burnFee(rFees.burnFee, tFees.burnFee);
        _donateFee(rFees.donateFee, tFees.donateFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferFromExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            Fees memory rFees,
            uint256 tTransferAmount,
            Fees memory tFees
        ) = _getValues(tAmount);
        
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFees.reflectFee, tFees.reflectFee);
        _liquidityFee(rFees.liquidityFee, tFees.liquidityFee);
        _burnFee(rFees.burnFee, tFees.burnFee);
        _donateFee(rFees.donateFee, tFees.donateFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferBothExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            Fees memory rFees,
            uint256 tTransferAmount,
            Fees memory tFees
        ) = _getValues(tAmount);
        
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFees.reflectFee, tFees.reflectFee);
        _liquidityFee(rFees.liquidityFee, tFees.liquidityFee);
        _burnFee(rFees.burnFee, tFees.burnFee);
        _donateFee(rFees.donateFee, tFees.donateFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _reflectFee(uint256 rReflectFee, uint256 tReflectFee) private {
        _rTotal = _rTotal.sub(rReflectFee);
        _tFeeTotal = _tFeeTotal.add(tReflectFee);
    }

    function _liquidityFee(uint256 rLiquidityFee, uint256 tLiquidityFee)
        private
    {
        _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidityFee);
        if (_isExcluded[address(this)])
            _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidityFee);
    }

    function _burnFee(uint256 rBurnFee, uint256 tBurnFee) private {
        _rOwned[address(this)] = _rOwned[address(this)].add(rBurnFee);
        if (_isExcluded[address(this)])
            _tOwned[address(this)] = _tOwned[address(this)].add(tBurnFee);
    }

    function _donateFee(uint256 rDonateFee, uint256 tDonateFee) private {
        _rOwned[address(this)] = _rOwned[address(this)].add(rDonateFee);
        if (_isExcluded[address(this)])
            _tOwned[address(this)] = _tOwned[address(this)].add(tDonateFee);
    }

   

    function _getValues(uint256 tAmount)
        private
        view
        returns (
            uint256,
            uint256,
            Fees memory,
            uint256,
            Fees memory
        )
    {
        (uint256 tTransferAmount, Fees memory tFees) = _getTValues(tAmount);
        uint256 currentRate = _getRate();
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            Fees memory rFees
        ) = _getRValues(tAmount, tFees, currentRate);
        return (rAmount, rTransferAmount, rFees, tTransferAmount, tFees);
    }

    function _getTValues(uint256 tAmount)
        private
        view
        returns (uint256, Fees memory)
    {
        Fees memory tFees;
        tFees.reflectFee = tAmount.mul(_reflectionFee).div(100);
        tFees.liquidityFee = tAmount.mul(_liquidityTax).div(100);
        tFees.burnFee = tAmount.mul(_burningFee).div(100);
        tFees.donateFee = tAmount.mul(_donateTax).div(100);
    
        uint256 tTransferAmount = tAmount
            .sub(tFees.reflectFee)
            .sub(tFees.liquidityFee)
            .sub(tFees.burnFee)
            .sub(tFees.donateFee);
           
        return (tTransferAmount, tFees);
    }

    function _getRValues(
        uint256 tAmount,
        Fees memory tFees,
        uint256 currentRate
    )
        private
        pure
        returns (
            uint256,
            uint256,
            Fees memory
        )
    {
        Fees memory rFees;
        uint256 rAmount = tAmount.mul(currentRate);
        rFees.reflectFee = tFees.reflectFee.mul(currentRate);
        rFees.liquidityFee = tFees.liquidityFee.mul(currentRate);
        rFees.burnFee = tFees.burnFee.mul(currentRate);
        rFees.donateFee = tFees.donateFee.mul(currentRate);
        
        uint256 rTransferAmount = rAmount
            .sub(rFees.reflectFee)
            .sub(rFees.liquidityFee)
            .sub(rFees.burnFee)
            .sub(rFees.donateFee);
            
        return (rAmount, rTransferAmount, rFees);
    }

    function _getRate() private view returns (uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns (uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (
                _rOwned[_excluded[i]] > rSupply ||
                _tOwned[_excluded[i]] > tSupply
            ) return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

    function reflectionFee() external view returns (uint256) {
        return _reflectionFee;
    }

    function changeFees(
        uint256 _newReflectionFee,
        uint256 _newLiquidityFee,
        uint256 _newBurnFee,
        uint256 _newDonateFee
        
    ) external onlyOwner returns (bool) {
        uint256 totalFee = _newReflectionFee
            .add(_newLiquidityFee)
            .add(_newBurnFee)
            .add(_newDonateFee);
        require(totalFee <= 15, "max fee limit exceeded");
        _reflectionFee = _newReflectionFee;
        _liquidityTax = _newLiquidityFee;
        _burningFee = _newBurnFee;
        _donateTax = _newDonateFee;
        
        emit ChangeFees(totalFee);
        return true;
    }

    function liquidityFee() public view returns (uint256) {
        return _liquidityTax;
    }

    function burningFee() public view returns (uint256) {
        return _burningFee;
    }

    function donateFee() public view returns (uint256) {
        return _donateTax;
    }

    

    function excludeFromFee(address account) external onlyOwner returns (bool) {
        require(account != address(0), "ERC20: account is the zero address");
        _isExcludedFromFee[account] = true;
        emit ExcludeFromFee(account);
        return true;
    }

    function includeInFee(address account) external onlyOwner returns (bool) {
        require(account != address(0), "ERC20: account is the zero address");
        _isExcludedFromFee[account] = false;
        emit IncludeInFee(account);
        return true;
    }

    function swapAndLiquify() external nonReentrant onlyOwner returns (bool) {
        uint256 balanceInContract = balanceOf(address(this));
        uint256 half = balanceInContract.div(2);
        uint256 otherHalf = balanceInContract.sub(half);
        uint256 initialBalance = address(this).balance;
        uint256 lf = liquidityFee();
        uint256 bf = burningFee();
        uint256 tf = donateFee();
       

        uint256 denominator = lf + bf + tf;

        uint256 liquidityAmount = half.mul(lf).div(denominator);
        uint256 burnAmount = half.mul(bf).div(denominator);
        uint256 donateAmount = half.mul(tf).div(denominator);
       
        emit SwapAndLiquify(
            half,
            liquidityAmount,
            burnAmount,
            donateAmount
            
        );
        swapTokensForEth(liquidityAmount);

        uint256 newBalance = address(this).balance.sub(initialBalance);

        addLiquidity(otherHalf, newBalance);

        if (donateAmount > 0) {
            _sendDonation(donateAmount);
        }

        if (burnAmount > 0) {
            _burn(burnAmount);
        }


        return true;
    }

    function calculateLiquidity() external view returns (uint256) {
        uint256 balanceInContract = balanceOf(address(this));
        uint256 lf = liquidityFee();
        uint256 bf = burningFee();
        uint256 tf = donateFee();

        uint256 denominator = lf + bf + tf;

        return balanceInContract.mul(lf).div(denominator);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // add the liquidity
        uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            owner(),
            block.timestamp
        );
    }

    function _burn(uint256 burnAmount) internal {
        _transfer(address(this), deadWallet, burnAmount);
        emit Transfer(address(this), deadWallet, burnAmount);
    }

    function _sendDonation(uint256 donateAmount) internal {
        _transfer(address(this), donateWallet, donateAmount);
        emit Transfer(address(this), donateWallet, donateAmount);
    }

    

    function setDonateWallet(address _newAddress) external onlyOwner {
        donateWallet = _newAddress;
    }

    

    //Use this function to withdraw stuck ETH
    function emergencyWithdraw() external nonReentrant onlyOwner {
        uint256 ethBalance = address(this).balance;
        (bool success, ) = payable(owner()).call{value: ethBalance}("");
        require(success, "Transfer failed!");

        emit EmergencyWithdraw(ethBalance);



    }

    receive() external payable {}
}

{
  "compilationTarget": {
    "DexterAI.sol": "DexterAI"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}