/**
 * SPDX-License-Identifier: UNLICENSED
 *
 * https://www.gpussy.org/
 *
*/

pragma solidity ^0.8.24;
 
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

interface IERC20 {

    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB) external returns (address pair);
}

interface IUniswapV2Router02 {
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}

abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
}

contract Ownable is Context {
    address private _owner;
    address private _previousOwner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    function owner() public view returns (address) {
        return _owner;
    }

    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

}

contract GPUSSY is Context, IERC20, Ownable {
    using SafeMath for uint256;

    string private constant _name = "Grab em by the pussy";
    string private constant _symbol = "GPUSSY";
    uint8 private constant _decimals = 9;
    uint256 private constant MAX = ~uint256(0);
    
    uint256 private constant _tTotal = 690000000000 * 10**9;
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 private _tFeeTotal;
    uint256 private _contractTokenSwapTrigger = 69000000 * 10**9;

    mapping (address => uint256) private _rOwned;
    mapping (address => uint256) private _tOwned;
    mapping (address => mapping (address => uint256)) private _allowances;
    mapping (address => bool) private _isExcludedFromFee;
    mapping (address => bool) private _isExcludedFromMaxWallet;

    uint256 private _taxFee = 0;
    uint256 private _teamFee = 0;
    uint256 private _maxWalletSize = 6900000000 * 10**9;
    uint256 private _buyFee = 10;
    uint256 private _sellFee = 30;

    uint256 private _previousTaxFee = _taxFee;
    uint256 private _previousteamFee = _teamFee;
    address payable private _feesWallet;
    IUniswapV2Router02 private uniswapV2Router;
    address private uniswapV2Pair;
    bool private tradingOpen = false;
    bool private _noFees = false;
    bool private _limitContractSwap = true;
    bool private inSwap = false;
    mapping(address => bool) private automatedMarketMakerPairs;

    event Response(bool success);

    modifier lockTheSwap {
        inSwap = true;
        _;
        inSwap = false;
    }
        constructor () {

        _feesWallet = payable(0xB86795f70fA49B59a6461A711c32298bb55C4d3D);
        
        _rOwned[_msgSender()] = _rTotal;
        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[_feesWallet] = true;
        _isExcludedFromMaxWallet[owner()] = true;
        _isExcludedFromMaxWallet[address(this)] = true;
        _isExcludedFromMaxWallet[_feesWallet] = true;

        emit Transfer(address(0), _msgSender(), _tTotal);
    }
    
    function _transfer(address from, address to, uint256 amount) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");

        if(from != owner() && to != owner()) {

            if(to != uniswapV2Pair && !_isExcludedFromMaxWallet[to] && _maxWalletSize != 0) {
                require(balanceOf(address(to)) + amount <= _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
            }
            
            if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
                require(tradingOpen, "Trading not yet enabled.");
                _teamFee = _buyFee;
            }
            uint256 contractTokenBalance = balanceOf(address(this));

            if(!inSwap && from != uniswapV2Pair && tradingOpen) {

                _teamFee = _sellFee;

                if (automatedMarketMakerPairs[to]) {
                    if(contractTokenBalance > _contractTokenSwapTrigger) {
                        if(_limitContractSwap) {
                            contractTokenBalance = _contractTokenSwapTrigger;
                        }
                        swapBack(contractTokenBalance);
                    }
                }
            }
        }
        bool takeFee = true;

        if(_noFees || _isExcludedFromFee[from] || _isExcludedFromFee[to]) {
            takeFee = false;
        } else if(!automatedMarketMakerPairs[from] && !automatedMarketMakerPairs[to]) {
            takeFee = false;
        }
        
        _tokenTransfer(from,to,amount,takeFee);
    }

    function swapBack(uint256 contractTokenBalance) private {
        
        swapTokensForEth(contractTokenBalance);

        uint256 contractETHBalance = address(this).balance;
        if(contractETHBalance > 0) {
            sendETHToFee(address(this).balance);
        }
    }

    function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }
        
    function sendETHToFee(uint256 amount) private {
        (bool success, ) = _feesWallet.call{value: amount}("");

        emit Response(success);
    }
    
    function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
        if(!takeFee)
            removeAllFee();
        _transferStandard(sender, recipient, amount);
        if(!takeFee)
            restoreAllFee();
    }

    function _transferStandard(address sender, address recipient, uint256 tAmount) private {
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); 

        _takeTeam(tTeam);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
        (uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
        uint256 currentRate =  _getRate();
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
        return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
    }

    function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
        uint256 tFee = tAmount.mul(taxFee).div(100);
        uint256 tTeam = tAmount.mul(TeamFee).div(100);
        uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
        return (tTransferAmount, tFee, tTeam);
    }

    function _getRate() private view returns(uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns(uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        if(rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

    function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rTeam = tTeam.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
        return (rAmount, rTransferAmount, rFee);
    }

    function _takeTeam(uint256 tTeam) private {
        uint256 currentRate =  _getRate();
        uint256 rTeam = tTeam.mul(currentRate);

        _rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
    }

    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }

    function thisBalance() public view returns (uint) {
        return balanceOf(address(this));
    }

    function amountInPool() public view returns (uint) {
        return balanceOf(uniswapV2Pair);
    }

    function balanceOf(address account) public view override returns (uint256) {
        return tokenFromReflection(_rOwned[account]);
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function removeAllFee() private {
        if(_taxFee == 0 && _teamFee == 0) return;
        _previousTaxFee = _taxFee;
        _previousteamFee = _teamFee;
        _taxFee = 0;
        _teamFee = 0;
    }
    
    function restoreAllFee() private {
        _taxFee = _previousTaxFee;
        _teamFee = _previousteamFee;
    }

    function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
        require(rAmount <= _rTotal, "Amount must be less than total reflections");
        uint256 currentRate =  _getRate();
        return rAmount.div(currentRate);
    }

    function name() public pure returns (string memory) {
        return _name;
    }

    function symbol() public pure returns (string memory) {
        return _symbol;
    }

    function decimals() public pure returns (uint8) {
        return _decimals;
    }

    function totalSupply() public pure override returns (uint256) {
        return _tTotal;
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    receive() external payable {}
    
    function openTrading() external onlyOwner() {
        require(!tradingOpen,"trading is already open");
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        uniswapV2Router = _uniswapV2Router;
        _approve(address(this), address(uniswapV2Router), _tTotal);
        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
        uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
        IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
        automatedMarketMakerPairs[uniswapV2Pair] = true;
        tradingOpen = true;
    }
    
    function setContractTokenSwapTrigger(uint256 numToken) external onlyOwner {
        _contractTokenSwapTrigger = numToken * 10**9;
    }

    function setMaxWallet(uint256 amt) external onlyOwner {
        _maxWalletSize = amt * 10**9;
    }

    function setFeesInEffect(bool onoff) external onlyOwner {
        _noFees = !onoff;
    }

    function setLimitContractSwap(bool onoff) external onlyOwner {
        _limitContractSwap = onoff;
    }
    
    function setFeesWallet (address payable fee) external onlyOwner {
        _isExcludedFromFee[_feesWallet] = false;
        _feesWallet = fee;
        _isExcludedFromFee[fee] = true;
    }

    function setFees(uint256 buy, uint256 sell, uint256 redist) external onlyOwner {
        _buyFee = buy;
        _sellFee = sell;
        _taxFee = redist;
    }

    function manualswap() external onlyOwner {
        uint256 contractBalance = balanceOf(address(this));
        swapTokensForEth(contractBalance);
    }
    
    function manualsend() external onlyOwner {
        uint256 contractETHBalance = address(this).balance;
        sendETHToFee(contractETHBalance);
    }

    function setAutomatedMarketMakerPair(address pair, bool value) external onlyOwner {
        require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
        _setAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        automatedMarketMakerPairs[pair] = value;
    }

    function transferForeignToken(address _token, address _to) external onlyOwner returns (bool _sent) {
        require(_token != address(0), "_token address cannot be 0");
        require(_token != address(this), "Can't withdraw native tokens");
        uint256 _contractBalance = IERC20(_token).balanceOf(address(this));
        _sent = IERC20(_token).transfer(_to, _contractBalance);
    }
    
}

{
  "compilationTarget": {
    "GPUSSY.sol": "GPUSSY"
  },
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}