// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {IDefaultCollateralMigrator} from "../interfaces/IDefaultCollateralMigrator.sol";
import {IDefaultCollateral} from "../interfaces/defaultCollateral/IDefaultCollateral.sol";

import {IVault} from "@symbioticfi/core/src/interfaces/vault/IVault.sol";

import {SafeERC20, IERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

contract DefaultCollateralMigrator is IDefaultCollateralMigrator {
    using SafeERC20 for IERC20;

    /**
     * @inheritdoc IDefaultCollateralMigrator
     */
    function migrate(
        address collateral,
        address vault,
        address onBehalfOf,
        uint256 amount
    ) external returns (uint256, uint256) {
        IERC20(collateral).transferFrom(msg.sender, address(this), amount);
        IDefaultCollateral(collateral).withdraw(address(this), amount);

        address asset = IDefaultCollateral(collateral).asset();
        amount = IERC20(asset).balanceOf(address(this));
        if (IERC20(asset).allowance(address(this), vault) < amount) {
            IERC20(asset).forceApprove(vault, type(uint256).max);
        }
        return IVault(vault).deposit(onBehalfOf, amount);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IDefaultCollateral is IERC20 {
    /**
     * @notice Get the collateral's underlying asset.
     * @return asset address of the underlying asset
     */
    function asset() external view returns (address);

    /**
     * @notice Get a maximum possible collateral total supply.
     * @return maximum collateral total supply
     */
    function limit() external view returns (uint256);

    /**
     * @notice Get an address of the limit increaser.
     * @return address of the limit increaser
     */
    function limitIncreaser() external view returns (address);

    /**
     * @notice Deposit a given amount of the underlying asset, and mint the collateral to a particular recipient.
     * @param recipient address of the collateral's recipient
     * @param amount amount of the underlying asset
     * @return amount of the collateral minted
     */
    function deposit(address recipient, uint256 amount) external returns (uint256);

    /**
     * @notice Deposit a given amount of the underlying asset using a permit functionality, and mint the collateral to a particular recipient.
     * @param recipient address of the collateral's recipient
     * @param amount amount of the underlying asset
     * @param deadline timestamp of the signature's deadline
     * @param v v component of the signature
     * @param r r component of the signature
     * @param s s component of the signature
     * @return amount of the collateral minted
     */
    function deposit(
        address recipient,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256);

    /**
     * @notice Withdraw a given amount of the underlying asset, and transfer it to a particular recipient.
     * @param recipient address of the underlying asset's recipient
     * @param amount amount of the underlying asset
     */
    function withdraw(address recipient, uint256 amount) external;

    /**
     * @notice Increase a limit of maximum collateral total supply.
     * @param amount amount to increase the limit by
     * @dev Called only by limitIncreaser.
     */
    function increaseLimit(
        uint256 amount
    ) external;

    /**
     * @notice Set a new limit increaser.
     * @param limitIncreaser address of the new limit increaser
     * @dev Called only by limitIncreaser.
     */
    function setLimitIncreaser(
        address limitIncreaser
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IDefaultCollateralMigrator {
    /**
     * @notice Unwrap a particular default collateral and deposit its underlying asset to a given vault.
     * @param collateral address of the default collateral to unwrap
     * @param vault address of the vault to deposit the collateral's underlying asset
     * @param onBehalfOf address of the account to deposit the underlying asset on behalf of
     * @param amount amount of the default collateral to unwrap and deposit
     * @return depositedAmount real amount of the collateral deposited
     * @return mintedShares amount of the active shares minted
     */
    function migrate(
        address collateral,
        address vault,
        address onBehalfOf,
        uint256 amount
    ) external returns (uint256 depositedAmount, uint256 mintedShares);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IMigratableEntity {
    error AlreadyInitialized();
    error NotFactory();
    error NotInitialized();

    /**
     * @notice Get the factory's address.
     * @return address of the factory
     */
    function FACTORY() external view returns (address);

    /**
     * @notice Get the entity's version.
     * @return version of the entity
     * @dev Starts from 1.
     */
    function version() external view returns (uint64);

    /**
     * @notice Initialize this entity contract by using a given data and setting a particular version and owner.
     * @param initialVersion initial version of the entity
     * @param owner initial owner of the entity
     * @param data some data to use
     */
    function initialize(uint64 initialVersion, address owner, bytes calldata data) external;

    /**
     * @notice Migrate this entity to a particular newer version using a given data.
     * @param newVersion new version of the entity
     * @param data some data to use
     */
    function migrate(uint64 newVersion, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IMigratableEntity} from "../common/IMigratableEntity.sol";
import {IVaultStorage} from "./IVaultStorage.sol";

interface IVault is IMigratableEntity, IVaultStorage {
    error AlreadyClaimed();
    error AlreadySet();
    error DelegatorAlreadyInitialized();
    error DepositLimitReached();
    error InsufficientClaim();
    error InsufficientDeposit();
    error InsufficientRedemption();
    error InsufficientWithdrawal();
    error InvalidAccount();
    error InvalidCaptureEpoch();
    error InvalidClaimer();
    error InvalidCollateral();
    error InvalidDelegator();
    error InvalidEpoch();
    error InvalidEpochDuration();
    error InvalidLengthEpochs();
    error InvalidOnBehalfOf();
    error InvalidRecipient();
    error InvalidSlasher();
    error MissingRoles();
    error NotDelegator();
    error NotSlasher();
    error NotWhitelistedDepositor();
    error SlasherAlreadyInitialized();
    error TooMuchRedeem();
    error TooMuchWithdraw();

    /**
     * @notice Initial parameters needed for a vault deployment.
     * @param collateral vault's underlying collateral
     * @param burner vault's burner to issue debt to (e.g., 0xdEaD or some unwrapper contract)
     * @param epochDuration duration of the vault epoch (it determines sync points for withdrawals)
     * @param depositWhitelist if enabling deposit whitelist
     * @param isDepositLimit if enabling deposit limit
     * @param depositLimit deposit limit (maximum amount of the collateral that can be in the vault simultaneously)
     * @param defaultAdminRoleHolder address of the initial DEFAULT_ADMIN_ROLE holder
     * @param depositWhitelistSetRoleHolder address of the initial DEPOSIT_WHITELIST_SET_ROLE holder
     * @param depositorWhitelistRoleHolder address of the initial DEPOSITOR_WHITELIST_ROLE holder
     * @param isDepositLimitSetRoleHolder address of the initial IS_DEPOSIT_LIMIT_SET_ROLE holder
     * @param depositLimitSetRoleHolder address of the initial DEPOSIT_LIMIT_SET_ROLE holder
     */
    struct InitParams {
        address collateral;
        address burner;
        uint48 epochDuration;
        bool depositWhitelist;
        bool isDepositLimit;
        uint256 depositLimit;
        address defaultAdminRoleHolder;
        address depositWhitelistSetRoleHolder;
        address depositorWhitelistRoleHolder;
        address isDepositLimitSetRoleHolder;
        address depositLimitSetRoleHolder;
    }

    /**
     * @notice Hints for an active balance.
     * @param activeSharesOfHint hint for the active shares of checkpoint
     * @param activeStakeHint hint for the active stake checkpoint
     * @param activeSharesHint hint for the active shares checkpoint
     */
    struct ActiveBalanceOfHints {
        bytes activeSharesOfHint;
        bytes activeStakeHint;
        bytes activeSharesHint;
    }

    /**
     * @notice Emitted when a deposit is made.
     * @param depositor account that made the deposit
     * @param onBehalfOf account the deposit was made on behalf of
     * @param amount amount of the collateral deposited
     * @param shares amount of the active shares minted
     */
    event Deposit(address indexed depositor, address indexed onBehalfOf, uint256 amount, uint256 shares);

    /**
     * @notice Emitted when a withdrawal is made.
     * @param withdrawer account that made the withdrawal
     * @param claimer account that needs to claim the withdrawal
     * @param amount amount of the collateral withdrawn
     * @param burnedShares amount of the active shares burned
     * @param mintedShares amount of the epoch withdrawal shares minted
     */
    event Withdraw(
        address indexed withdrawer, address indexed claimer, uint256 amount, uint256 burnedShares, uint256 mintedShares
    );

    /**
     * @notice Emitted when a claim is made.
     * @param claimer account that claimed
     * @param recipient account that received the collateral
     * @param epoch epoch the collateral was claimed for
     * @param amount amount of the collateral claimed
     */
    event Claim(address indexed claimer, address indexed recipient, uint256 epoch, uint256 amount);

    /**
     * @notice Emitted when a batch claim is made.
     * @param claimer account that claimed
     * @param recipient account that received the collateral
     * @param epochs epochs the collateral was claimed for
     * @param amount amount of the collateral claimed
     */
    event ClaimBatch(address indexed claimer, address indexed recipient, uint256[] epochs, uint256 amount);

    /**
     * @notice Emitted when a slash happens.
     * @param amount amount of the collateral to slash
     * @param captureTimestamp time point when the stake was captured
     * @param slashedAmount real amount of the collateral slashed
     */
    event OnSlash(uint256 amount, uint48 captureTimestamp, uint256 slashedAmount);

    /**
     * @notice Emitted when a deposit whitelist status is enabled/disabled.
     * @param status if enabled deposit whitelist
     */
    event SetDepositWhitelist(bool status);

    /**
     * @notice Emitted when a depositor whitelist status is set.
     * @param account account for which the whitelist status is set
     * @param status if whitelisted the account
     */
    event SetDepositorWhitelistStatus(address indexed account, bool status);

    /**
     * @notice Emitted when a deposit limit status is enabled/disabled.
     * @param status if enabled deposit limit
     */
    event SetIsDepositLimit(bool status);

    /**
     * @notice Emitted when a deposit limit is set.
     * @param limit deposit limit (maximum amount of the collateral that can be in the vault simultaneously)
     */
    event SetDepositLimit(uint256 limit);

    /**
     * @notice Emitted when a delegator is set.
     * @param delegator vault's delegator to delegate the stake to networks and operators
     * @dev Can be set only once.
     */
    event SetDelegator(address indexed delegator);

    /**
     * @notice Emitted when a slasher is set.
     * @param slasher vault's slasher to provide a slashing mechanism to networks
     * @dev Can be set only once.
     */
    event SetSlasher(address indexed slasher);

    /**
     * @notice Check if the vault is fully initialized (a delegator and a slasher are set).
     * @return if the vault is fully initialized
     */
    function isInitialized() external view returns (bool);

    /**
     * @notice Get a total amount of the collateral that can be slashed.
     * @return total amount of the slashable collateral
     */
    function totalStake() external view returns (uint256);

    /**
     * @notice Get an active balance for a particular account at a given timestamp using hints.
     * @param account account to get the active balance for
     * @param timestamp time point to get the active balance for the account at
     * @param hints hints for checkpoints' indexes
     * @return active balance for the account at the timestamp
     */
    function activeBalanceOfAt(
        address account,
        uint48 timestamp,
        bytes calldata hints
    ) external view returns (uint256);

    /**
     * @notice Get an active balance for a particular account.
     * @param account account to get the active balance for
     * @return active balance for the account
     */
    function activeBalanceOf(
        address account
    ) external view returns (uint256);

    /**
     * @notice Get withdrawals for a particular account at a given epoch (zero if claimed).
     * @param epoch epoch to get the withdrawals for the account at
     * @param account account to get the withdrawals for
     * @return withdrawals for the account at the epoch
     */
    function withdrawalsOf(uint256 epoch, address account) external view returns (uint256);

    /**
     * @notice Get a total amount of the collateral that can be slashed for a given account.
     * @param account account to get the slashable collateral for
     * @return total amount of the account's slashable collateral
     */
    function slashableBalanceOf(
        address account
    ) external view returns (uint256);

    /**
     * @notice Deposit collateral into the vault.
     * @param onBehalfOf account the deposit is made on behalf of
     * @param amount amount of the collateral to deposit
     * @return depositedAmount real amount of the collateral deposited
     * @return mintedShares amount of the active shares minted
     */
    function deposit(
        address onBehalfOf,
        uint256 amount
    ) external returns (uint256 depositedAmount, uint256 mintedShares);

    /**
     * @notice Withdraw collateral from the vault (it will be claimable after the next epoch).
     * @param claimer account that needs to claim the withdrawal
     * @param amount amount of the collateral to withdraw
     * @return burnedShares amount of the active shares burned
     * @return mintedShares amount of the epoch withdrawal shares minted
     */
    function withdraw(address claimer, uint256 amount) external returns (uint256 burnedShares, uint256 mintedShares);

    /**
     * @notice Redeem collateral from the vault (it will be claimable after the next epoch).
     * @param claimer account that needs to claim the withdrawal
     * @param shares amount of the active shares to redeem
     * @return withdrawnAssets amount of the collateral withdrawn
     * @return mintedShares amount of the epoch withdrawal shares minted
     */
    function redeem(address claimer, uint256 shares) external returns (uint256 withdrawnAssets, uint256 mintedShares);

    /**
     * @notice Claim collateral from the vault.
     * @param recipient account that receives the collateral
     * @param epoch epoch to claim the collateral for
     * @return amount amount of the collateral claimed
     */
    function claim(address recipient, uint256 epoch) external returns (uint256 amount);

    /**
     * @notice Claim collateral from the vault for multiple epochs.
     * @param recipient account that receives the collateral
     * @param epochs epochs to claim the collateral for
     * @return amount amount of the collateral claimed
     */
    function claimBatch(address recipient, uint256[] calldata epochs) external returns (uint256 amount);

    /**
     * @notice Slash callback for burning collateral.
     * @param amount amount to slash
     * @param captureTimestamp time point when the stake was captured
     * @return slashedAmount real amount of the collateral slashed
     * @dev Only the slasher can call this function.
     */
    function onSlash(uint256 amount, uint48 captureTimestamp) external returns (uint256 slashedAmount);

    /**
     * @notice Enable/disable deposit whitelist.
     * @param status if enabling deposit whitelist
     * @dev Only a DEPOSIT_WHITELIST_SET_ROLE holder can call this function.
     */
    function setDepositWhitelist(
        bool status
    ) external;

    /**
     * @notice Set a depositor whitelist status.
     * @param account account for which the whitelist status is set
     * @param status if whitelisting the account
     * @dev Only a DEPOSITOR_WHITELIST_ROLE holder can call this function.
     */
    function setDepositorWhitelistStatus(address account, bool status) external;

    /**
     * @notice Enable/disable deposit limit.
     * @param status if enabling deposit limit
     * @dev Only a IS_DEPOSIT_LIMIT_SET_ROLE holder can call this function.
     */
    function setIsDepositLimit(
        bool status
    ) external;

    /**
     * @notice Set a deposit limit.
     * @param limit deposit limit (maximum amount of the collateral that can be in the vault simultaneously)
     * @dev Only a DEPOSIT_LIMIT_SET_ROLE holder can call this function.
     */
    function setDepositLimit(
        uint256 limit
    ) external;

    /**
     * @notice Set a delegator.
     * @param delegator vault's delegator to delegate the stake to networks and operators
     * @dev Can be set only once.
     */
    function setDelegator(
        address delegator
    ) external;

    /**
     * @notice Set a slasher.
     * @param slasher vault's slasher to provide a slashing mechanism to networks
     * @dev Can be set only once.
     */
    function setSlasher(
        address slasher
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IVaultStorage {
    error InvalidTimestamp();
    error NoPreviousEpoch();

    /**
     * @notice Get a deposit whitelist enabler/disabler's role.
     * @return identifier of the whitelist enabler/disabler role
     */
    function DEPOSIT_WHITELIST_SET_ROLE() external view returns (bytes32);

    /**
     * @notice Get a depositor whitelist status setter's role.
     * @return identifier of the depositor whitelist status setter role
     */
    function DEPOSITOR_WHITELIST_ROLE() external view returns (bytes32);

    /**
     * @notice Get a deposit limit enabler/disabler's role.
     * @return identifier of the deposit limit enabler/disabler role
     */
    function IS_DEPOSIT_LIMIT_SET_ROLE() external view returns (bytes32);

    /**
     * @notice Get a deposit limit setter's role.
     * @return identifier of the deposit limit setter role
     */
    function DEPOSIT_LIMIT_SET_ROLE() external view returns (bytes32);

    /**
     * @notice Get the delegator factory's address.
     * @return address of the delegator factory
     */
    function DELEGATOR_FACTORY() external view returns (address);

    /**
     * @notice Get the slasher factory's address.
     * @return address of the slasher factory
     */
    function SLASHER_FACTORY() external view returns (address);

    /**
     * @notice Get a vault collateral.
     * @return address of the underlying collateral
     */
    function collateral() external view returns (address);

    /**
     * @notice Get a burner to issue debt to (e.g., 0xdEaD or some unwrapper contract).
     * @return address of the burner
     */
    function burner() external view returns (address);

    /**
     * @notice Get a delegator (it delegates the vault's stake to networks and operators).
     * @return address of the delegator
     */
    function delegator() external view returns (address);

    /**
     * @notice Get if the delegator is initialized.
     * @return if the delegator is initialized
     */
    function isDelegatorInitialized() external view returns (bool);

    /**
     * @notice Get a slasher (it provides networks a slashing mechanism).
     * @return address of the slasher
     */
    function slasher() external view returns (address);

    /**
     * @notice Get if the slasher is initialized.
     * @return if the slasher is initialized
     */
    function isSlasherInitialized() external view returns (bool);

    /**
     * @notice Get a time point of the epoch duration set.
     * @return time point of the epoch duration set
     */
    function epochDurationInit() external view returns (uint48);

    /**
     * @notice Get a duration of the vault epoch.
     * @return duration of the epoch
     */
    function epochDuration() external view returns (uint48);

    /**
     * @notice Get an epoch at a given timestamp.
     * @param timestamp time point to get the epoch at
     * @return epoch at the timestamp
     * @dev Reverts if the timestamp is less than the start of the epoch 0.
     */
    function epochAt(
        uint48 timestamp
    ) external view returns (uint256);

    /**
     * @notice Get a current vault epoch.
     * @return current epoch
     */
    function currentEpoch() external view returns (uint256);

    /**
     * @notice Get a start of the current vault epoch.
     * @return start of the current epoch
     */
    function currentEpochStart() external view returns (uint48);

    /**
     * @notice Get a start of the previous vault epoch.
     * @return start of the previous epoch
     * @dev Reverts if the current epoch is 0.
     */
    function previousEpochStart() external view returns (uint48);

    /**
     * @notice Get a start of the next vault epoch.
     * @return start of the next epoch
     */
    function nextEpochStart() external view returns (uint48);

    /**
     * @notice Get if the deposit whitelist is enabled.
     * @return if the deposit whitelist is enabled
     */
    function depositWhitelist() external view returns (bool);

    /**
     * @notice Get if a given account is whitelisted as a depositor.
     * @param account address to check
     * @return if the account is whitelisted as a depositor
     */
    function isDepositorWhitelisted(
        address account
    ) external view returns (bool);

    /**
     * @notice Get if the deposit limit is set.
     * @return if the deposit limit is set
     */
    function isDepositLimit() external view returns (bool);

    /**
     * @notice Get a deposit limit (maximum amount of the active stake that can be in the vault simultaneously).
     * @return deposit limit
     */
    function depositLimit() external view returns (uint256);

    /**
     * @notice Get a total number of active shares in the vault at a given timestamp using a hint.
     * @param timestamp time point to get the total number of active shares at
     * @param hint hint for the checkpoint index
     * @return total number of active shares at the timestamp
     */
    function activeSharesAt(uint48 timestamp, bytes memory hint) external view returns (uint256);

    /**
     * @notice Get a total number of active shares in the vault.
     * @return total number of active shares
     */
    function activeShares() external view returns (uint256);

    /**
     * @notice Get a total amount of active stake in the vault at a given timestamp using a hint.
     * @param timestamp time point to get the total active stake at
     * @param hint hint for the checkpoint index
     * @return total amount of active stake at the timestamp
     */
    function activeStakeAt(uint48 timestamp, bytes memory hint) external view returns (uint256);

    /**
     * @notice Get a total amount of active stake in the vault.
     * @return total amount of active stake
     */
    function activeStake() external view returns (uint256);

    /**
     * @notice Get a total number of active shares for a particular account at a given timestamp using a hint.
     * @param account account to get the number of active shares for
     * @param timestamp time point to get the number of active shares for the account at
     * @param hint hint for the checkpoint index
     * @return number of active shares for the account at the timestamp
     */
    function activeSharesOfAt(address account, uint48 timestamp, bytes memory hint) external view returns (uint256);

    /**
     * @notice Get a number of active shares for a particular account.
     * @param account account to get the number of active shares for
     * @return number of active shares for the account
     */
    function activeSharesOf(
        address account
    ) external view returns (uint256);

    /**
     * @notice Get a total amount of the withdrawals at a given epoch.
     * @param epoch epoch to get the total amount of the withdrawals at
     * @return total amount of the withdrawals at the epoch
     */
    function withdrawals(
        uint256 epoch
    ) external view returns (uint256);

    /**
     * @notice Get a total number of withdrawal shares at a given epoch.
     * @param epoch epoch to get the total number of withdrawal shares at
     * @return total number of withdrawal shares at the epoch
     */
    function withdrawalShares(
        uint256 epoch
    ) external view returns (uint256);

    /**
     * @notice Get a number of withdrawal shares for a particular account at a given epoch (zero if claimed).
     * @param epoch epoch to get the number of withdrawal shares for the account at
     * @param account account to get the number of withdrawal shares for
     * @return number of withdrawal shares for the account at the epoch
     */
    function withdrawalSharesOf(uint256 epoch, address account) external view returns (uint256);

    /**
     * @notice Get if the withdrawals are claimed for a particular account at a given epoch.
     * @param epoch epoch to check the withdrawals for the account at
     * @param account account to check the withdrawals for
     * @return if the withdrawals are claimed for the account at the epoch
     */
    function isWithdrawalsClaimed(uint256 epoch, address account) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

{
  "compilationTarget": {
    "src/contracts/DefaultCollateralMigrator.sol": "DefaultCollateralMigrator"
  },
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@openzeppelin/contracts-upgradeable/=lib/core/lib/openzeppelin-contracts-upgradeable/contracts/",
    ":@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    ":@symbioticfi/collateral/=lib/collateral/",
    ":@symbioticfi/core/=lib/core/",
    ":collateral/=lib/collateral/",
    ":core/=lib/core/",
    ":ds-test/=lib/openzeppelin-contracts/lib/forge-std/lib/ds-test/src/",
    ":erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    ":forge-gas-snapshot/=lib/collateral/lib/permit2/lib/forge-gas-snapshot/src/",
    ":forge-std/=lib/forge-std/src/",
    ":openzeppelin-contracts-upgradeable/=lib/core/lib/openzeppelin-contracts-upgradeable/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/",
    ":permit2/=lib/collateral/lib/permit2/",
    ":solmate/=lib/collateral/lib/permit2/lib/solmate/"
  ],
  "viaIR": true
}