Max Revive

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

interface IUniswapV2Factory {
  event PairCreated(
    address indexed token0,
    address indexed token1,
    address pair,
    uint256
  );

  function feeTo() external view returns (address);

  function feeToSetter() external view returns (address);

  function getPair(address tokenA, address tokenB)
    external
    view
    returns (address pair);

  function allPairs(uint256) external view returns (address pair);

  function allPairsLength() external view returns (uint256);

  function createPair(address tokenA, address tokenB)
    external
    returns (address pair);

  function setFeeTo(address) external;

  function setFeeToSetter(address) external;
}

interface IUniswapV2Pair {
  event Approval(address indexed owner, address indexed spender, uint256 value);
  event Transfer(address indexed from, address indexed to, uint256 value);

  function name() external pure returns (string memory);

  function symbol() external pure returns (string memory);

  function decimals() external pure returns (uint8);

  function totalSupply() external view returns (uint256);

  function balanceOf(address owner) external view returns (uint256);

  function allowance(address owner, address spender)
    external
    view
    returns (uint256);

  function approve(address spender, uint256 value) external returns (bool);

  function transfer(address to, uint256 value) external returns (bool);

  function transferFrom(
    address from,
    address to,
    uint256 value
  ) external returns (bool);

  function DOMAIN_SEPARATOR() external view returns (bytes32);

  function PERMIT_TYPEHASH() external pure returns (bytes32);

  function nonces(address owner) external view returns (uint256);

  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  event Mint(address indexed sender, uint256 amount0, uint256 amount1);
  event Burn(
    address indexed sender,
    uint256 amount0,
    uint256 amount1,
    address indexed to
  );
  event Swap(
    address indexed sender,
    uint256 amount0In,
    uint256 amount1In,
    uint256 amount0Out,
    uint256 amount1Out,
    address indexed to
  );
  event Sync(uint112 reserve0, uint112 reserve1);

  function MINIMUM_LIQUIDITY() external pure returns (uint256);

  function factory() external view returns (address);

  function token0() external view returns (address);

  function token1() external view returns (address);

  function getReserves()
    external
    view
    returns (
      uint112 reserve0,
      uint112 reserve1,
      uint32 blockTimestampLast
    );

  function price0CumulativeLast() external view returns (uint256);

  function price1CumulativeLast() external view returns (uint256);

  function kLast() external view returns (uint256);

  function mint(address to) external returns (uint256 liquidity);

  function burn(address to) external returns (uint256 amount0, uint256 amount1);

  function swap(
    uint256 amount0Out,
    uint256 amount1Out,
    address to,
    bytes calldata data
  ) external;

  function skim(address to) external;

  function sync() external;

  function initialize(address, address) external;
}

interface IUniswapV2Router01 {
  function factory() external pure returns (address);

  function WETH() external pure returns (address);

  function addLiquidity(
    address tokenA,
    address tokenB,
    uint256 amountADesired,
    uint256 amountBDesired,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  )
    external
    returns (
      uint256 amountA,
      uint256 amountB,
      uint256 liquidity
    );

  function addLiquidityETH(
    address token,
    uint256 amountTokenDesired,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  )
    external
    payable
    returns (
      uint256 amountToken,
      uint256 amountETH,
      uint256 liquidity
    );

  function removeLiquidity(
    address tokenA,
    address tokenB,
    uint256 liquidity,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountA, uint256 amountB);

  function removeLiquidityETH(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountToken, uint256 amountETH);

  function removeLiquidityWithPermit(
    address tokenA,
    address tokenB,
    uint256 liquidity,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountA, uint256 amountB);

  function removeLiquidityETHWithPermit(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountToken, uint256 amountETH);

  function swapExactTokensForTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapTokensForExactTokens(
    uint256 amountOut,
    uint256 amountInMax,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapExactETHForTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable returns (uint256[] memory amounts);

  function swapTokensForExactETH(
    uint256 amountOut,
    uint256 amountInMax,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapExactTokensForETH(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapETHForExactTokens(
    uint256 amountOut,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable returns (uint256[] memory amounts);

  function quote(
    uint256 amountA,
    uint256 reserveA,
    uint256 reserveB
  ) external pure returns (uint256 amountB);

  function getAmountOut(
    uint256 amountIn,
    uint256 reserveIn,
    uint256 reserveOut
  ) external pure returns (uint256 amountOut);

  function getAmountIn(
    uint256 amountOut,
    uint256 reserveIn,
    uint256 reserveOut
  ) external pure returns (uint256 amountIn);

  function getAmountsOut(uint256 amountIn, address[] calldata path)
    external
    view
    returns (uint256[] memory amounts);

  function getAmountsIn(uint256 amountOut, address[] calldata path)
    external
    view
    returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
  function removeLiquidityETHSupportingFeeOnTransferTokens(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountETH);

  function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountETH);

  function swapExactTokensForTokensSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;

  function swapExactETHForTokensSupportingFeeOnTransferTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable;

  function swapExactTokensForETHSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;
}

// SPDX-License-Identifier: Unlicensed
pragma solidity 0.7.6;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/math/SafeMath.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import './interface/IUniswapV2Pair.sol';
import './interface/IUniswapV2Factory.sol';
import './interface/IUniswapV2Router.sol';

contract MaxRevive is Context, IERC20, Ownable {
  using SafeMath for uint256;
  using Address for address;

  mapping(address => uint256) private _rOwned;
  mapping(address => uint256) private _tOwned;
  mapping(address => mapping(address => uint256)) private _allowances;

  mapping(address => bool) public blacklist;

  mapping(address => bool) private _isExcludedFromFee;

  mapping(address => bool) private _isExcluded;
  address[] private _excluded;

  uint256 private constant MAX = ~uint256(0);
  uint256 private _tTotal = 1000000000 * 10**9;
  uint256 private _rTotal = (MAX - (MAX % _tTotal));
  uint256 private _tFeeTotal;

  string private _name = 'Max Revive';
  string private _symbol = 'MAXR';
  uint8 private _decimals = 9;

  address public devAddress =
    address(0xEBdC249284a90B5A30e7b1c5DE2466aa79408F18);
  address public marketAddress =
    address(0x231c86C614264F02485986Fc3C69e5148DBE3028);
  address public recoveryAddress =
    address(0xa2A2E289C964dbf1203c5F475eeCE3eBEA44Ce6f);

  uint256 public devFee = 15;
  uint256 public marketFee = 40;
  uint256 public recoveryFee = 25;

  uint256 public _taxFee = 20;
  uint256 private _previousTaxFee = _taxFee;

  uint256 public _liquidityFee = 0;
  uint256 private _previousLiquidityFee = _liquidityFee;

  IUniswapV2Router02 public uniswapV2Router;
  address public uniswapV2Pair;

  bool inSwapAndLiquify;

  event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
  event SwapAndLiquifyEnabledUpdated(bool enabled);
  event SwapAndLiquify(
    uint256 tokensSwapped,
    uint256 ethReceived,
    uint256 tokensIntoLiqudity
  );

  modifier lockTheSwap() {
    inSwapAndLiquify = true;
    _;
    inSwapAndLiquify = false;
  }

  constructor() public {
    _rOwned[_msgSender()] = _rTotal;

    IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
      0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
    );
    // Create a uniswap pair for this new token
    uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(
      address(this),
      _uniswapV2Router.WETH()
    );

    // set the rest of the contract variables
    uniswapV2Router = _uniswapV2Router;

    //exclude owner and this contract from fee
    _isExcludedFromFee[owner()] = true;
    _isExcludedFromFee[address(this)] = true;

    excludeFromReward(owner());
    excludeFromReward(address(this));
    excludeFromReward(uniswapV2Pair);

    emit Transfer(address(0), _msgSender(), _tTotal);
  }

  function name() public view returns (string memory) {
    return _name;
  }

  function symbol() public view returns (string memory) {
    return _symbol;
  }

  function decimals() public view returns (uint8) {
    return _decimals;
  }

  function totalSupply() public view override returns (uint256) {
    return _tTotal;
  }

  function balanceOf(address account) public view override returns (uint256) {
    if (_isExcluded[account]) return _tOwned[account];
    return tokenFromReflection(_rOwned[account]);
  }

  function transfer(address recipient, uint256 amount)
    public
    override
    returns (bool)
  {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  function allowance(address _owner, address spender)
    public
    view
    override
    returns (uint256)
  {
    return _allowances[_owner][spender];
  }

  function approve(address spender, uint256 amount)
    public
    override
    returns (bool)
  {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(
      sender,
      _msgSender(),
      _allowances[sender][_msgSender()].sub(
        amount,
        'ERC20: transfer amount exceeds allowance'
      )
    );
    return true;
  }

  function increaseAllowance(address spender, uint256 addedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].add(addedValue)
    );
    return true;
  }

  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].sub(
        subtractedValue,
        'ERC20: decreased allowance below zero'
      )
    );
    return true;
  }

  function isExcludedFromReward(address account) public view returns (bool) {
    return _isExcluded[account];
  }

  function totalFees() public view returns (uint256) {
    return _tFeeTotal;
  }

  function deliver(uint256 tAmount) public {
    address sender = _msgSender();
    require(
      !_isExcluded[sender],
      'Excluded addresses cannot call this function'
    );
    (uint256 rAmount, , , , , ) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rTotal = _rTotal.sub(rAmount);
    _tFeeTotal = _tFeeTotal.add(tAmount);
  }

  function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
    public
    view
    returns (uint256)
  {
    require(tAmount <= _tTotal, 'Amount must be less than supply');
    if (!deductTransferFee) {
      (uint256 rAmount, , , , , ) = _getValues(tAmount);
      return rAmount;
    } else {
      (, uint256 rTransferAmount, , , , ) = _getValues(tAmount);
      return rTransferAmount;
    }
  }

  function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
    require(rAmount <= _rTotal, 'Amount must be less than total reflections');
    uint256 currentRate = _getRate();
    return rAmount.div(currentRate);
  }

  function excludeFromReward(address account) public onlyOwner {
    // require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
    require(!_isExcluded[account], 'Account is already excluded');
    if (_rOwned[account] > 0) {
      _tOwned[account] = tokenFromReflection(_rOwned[account]);
    }
    _isExcluded[account] = true;
    _excluded.push(account);
  }

  function includeInReward(address account) external onlyOwner {
    require(_isExcluded[account], 'Account is already excluded');
    for (uint256 i = 0; i < _excluded.length; i++) {
      if (_excluded[i] == account) {
        _excluded[i] = _excluded[_excluded.length - 1];
        _tOwned[account] = 0;
        _isExcluded[account] = false;
        _excluded.pop();
        break;
      }
    }
  }

  function _transferBothExcluded(
    address sender,
    address recipient,
    uint256 tAmount
  ) private {
    (
      uint256 rAmount,
      uint256 rTransferAmount,
      uint256 rFee,
      uint256 tTransferAmount,
      uint256 tFee,
      uint256 tLiquidity
    ) = _getValues(tAmount);
    _tOwned[sender] = _tOwned[sender].sub(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
    _takeLiquidity(tLiquidity);
    _reflectFee(rFee, tFee);
    emit Transfer(sender, recipient, tTransferAmount);
  }

  function excludeFromFee(address account) public onlyOwner {
    _isExcludedFromFee[account] = true;
  }

  function includeInFee(address account) public onlyOwner {
    _isExcludedFromFee[account] = false;
  }

  function setDevAddress(address account) external onlyOwner {
    devAddress = account;
  }

  function setMarketAddress(address account) external onlyOwner {
    marketAddress = account;
  }

  function setRecoveryAddress(address account) external onlyOwner {
    recoveryAddress = account;
  }

  function setDevFeePercent(uint256 fee) external onlyOwner {
    devFee = fee;
  }

  function setMarketFeePercent(uint256 fee) external onlyOwner {
    marketFee = fee;
  }

  function setRecoveryFeePercent(uint256 fee) external onlyOwner {
    recoveryFee = fee;
  }

  function setTaxFeePercent(uint256 taxFee) external onlyOwner {
    _taxFee = taxFee;
  }

  function updateBlacklist(address account, bool res) external onlyOwner {
    blacklist[account] = res;
  }

  //to recieve ETH from uniswapV2Router when swaping
  receive() external payable {}

  function _reflectFee(uint256 rFee, uint256 tFee) private {
    _rTotal = _rTotal.sub(rFee);
    _tFeeTotal = _tFeeTotal.add(tFee);
  }

  function _getValues(uint256 tAmount)
    private
    view
    returns (
      uint256,
      uint256,
      uint256,
      uint256,
      uint256,
      uint256
    )
  {
    (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(
      tAmount
    );
    (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
      tAmount,
      tFee,
      tLiquidity,
      _getRate()
    );
    return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
  }

  function _getTValues(uint256 tAmount)
    private
    view
    returns (
      uint256,
      uint256,
      uint256
    )
  {
    uint256 tFee = calculateTaxFee(tAmount);
    uint256 tLiquidity = calculateLiquidityFee(tAmount);
    uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
    return (tTransferAmount, tFee, tLiquidity);
  }

  function _getRValues(
    uint256 tAmount,
    uint256 tFee,
    uint256 tLiquidity,
    uint256 currentRate
  )
    private
    pure
    returns (
      uint256,
      uint256,
      uint256
    )
  {
    uint256 rAmount = tAmount.mul(currentRate);
    uint256 rFee = tFee.mul(currentRate);
    uint256 rLiquidity = tLiquidity.mul(currentRate);
    uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
    return (rAmount, rTransferAmount, rFee);
  }

  function _getRate() private view returns (uint256) {
    (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
    return rSupply.div(tSupply);
  }

  function _getCurrentSupply() private view returns (uint256, uint256) {
    uint256 rSupply = _rTotal;
    uint256 tSupply = _tTotal;
    for (uint256 i = 0; i < _excluded.length; i++) {
      if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply)
        return (_rTotal, _tTotal);
      rSupply = rSupply.sub(_rOwned[_excluded[i]]);
      tSupply = tSupply.sub(_tOwned[_excluded[i]]);
    }
    if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
    return (rSupply, tSupply);
  }

  function _takeLiquidity(uint256 tLiquidity) private {
    uint256 currentRate = _getRate();
    uint256 rLiquidity = tLiquidity.mul(currentRate);
    _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
    if (_isExcluded[address(this)])
      _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
  }

  function calculateTaxFee(uint256 _amount) private view returns (uint256) {
    return _amount.mul(_taxFee).div(10**3);
  }

  function calculateLiquidityFee(uint256 _amount)
    private
    view
    returns (uint256)
  {
    return _amount.mul(_liquidityFee).div(10**3);
  }

  function removeAllFee() private {
    if (_taxFee == 0 && _liquidityFee == 0) return;

    _previousTaxFee = _taxFee;
    _previousLiquidityFee = _liquidityFee;

    _taxFee = 0;
    _liquidityFee = 0;
  }

  function restoreAllFee() private {
    _taxFee = _previousTaxFee;
    _liquidityFee = _previousLiquidityFee;
  }

  function isExcludedFromFee(address account) public view returns (bool) {
    return _isExcludedFromFee[account];
  }

  function _approve(
    address _owner,
    address spender,
    uint256 amount
  ) private {
    require(_owner != address(0), 'ERC20: approve from the zero address');
    require(spender != address(0), 'ERC20: approve to the zero address');

    _allowances[_owner][spender] = amount;
    emit Approval(_owner, spender, amount);
  }

  function _transfer(
    address from,
    address to,
    uint256 amount
  ) private {
    require(from != address(0), 'ERC20: transfer from the zero address');
    require(to != address(0), 'ERC20: transfer to the zero address');
    require(amount > 0, 'Transfer amount must be greater than zero');
    require(!blacklist[from], 'Sender blacklisted');
    require(!blacklist[to], 'Recipient blacklisted');

    uint256 contractTokenBalance = balanceOf(address(this));

    if (
      contractTokenBalance > 0 &&
      !inSwapAndLiquify &&
      from != address(uniswapV2Router) &&
      to == uniswapV2Pair &&
      !isExcludedFromFee(from)
    ) {
      swapAndDistribute(contractTokenBalance);
    }

    if (
      !inSwapAndLiquify &&
      (from == uniswapV2Pair || to == uniswapV2Pair) &&
      !isExcludedFromFee(from) &&
      !isExcludedFromFee(to)
    ) {
      uint256 totalFee = devFee.add(marketFee).add(recoveryFee);
      uint256 feeAmount = amount.mul(totalFee).div(10**3);
      uint256 remainingAmount = amount.sub(feeAmount);
      if (totalFee > 0) {
        _tokenTransfer(from, address(this), feeAmount, false);
      }
      _tokenTransfer(from, to, remainingAmount, true);
    } else {
      _tokenTransfer(from, to, amount, false);
    }
  }

  function swapAndDistribute(uint256 tokenAmount) private lockTheSwap {
    swapTokensForEth(tokenAmount);

    uint256 amountETH = address(this).balance;
    uint256 totalFee = devFee.add(marketFee).add(recoveryFee);
    if (totalFee > 0) {
      uint256 marketAmount = amountETH.mul(marketFee).div(totalFee);
      uint256 recoveryAmount = amountETH.mul(recoveryFee).div(totalFee);
      uint256 devAmount = amountETH.sub(marketAmount).sub(recoveryAmount);

      payable(marketAddress).call{value: marketAmount}('');
      payable(recoveryAddress).call{value: recoveryAmount}('');
      payable(devAddress).call{value: devAmount}('');
    }
  }

  function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
    // split the contract balance into halves
    uint256 half = contractTokenBalance.div(2);
    uint256 otherHalf = contractTokenBalance.sub(half);

    // capture the contract's current ETH balance.
    // this is so that we can capture exactly the amount of ETH that the
    // swap creates, and not make the liquidity event include any ETH that
    // has been manually sent to the contract
    uint256 initialBalance = address(this).balance;

    // swap tokens for ETH
    swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered

    // how much ETH did we just swap into?
    uint256 newBalance = address(this).balance.sub(initialBalance);

    // add liquidity to uniswap
    addLiquidity(otherHalf, newBalance);

    emit SwapAndLiquify(half, newBalance, otherHalf);
  }

  function swapTokensForEth(uint256 tokenAmount) private {
    // generate the uniswap pair path of token -> weth
    address[] memory path = new address[](2);
    path[0] = address(this);
    path[1] = uniswapV2Router.WETH();

    _approve(address(this), address(uniswapV2Router), tokenAmount);

    // make the swap
    uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
      tokenAmount,
      0, // accept any amount of ETH
      path,
      address(this),
      block.timestamp
    );
  }

  function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
    // approve token transfer to cover all possible scenarios
    _approve(address(this), address(uniswapV2Router), tokenAmount);

    // add the liquidity
    uniswapV2Router.addLiquidityETH{value: ethAmount}(
      address(this),
      tokenAmount,
      0, // slippage is unavoidable
      0, // slippage is unavoidable
      owner(),
      block.timestamp
    );
  }

  //this method is responsible for taking all fee, if takeFee is true
  function _tokenTransfer(
    address sender,
    address recipient,
    uint256 amount,
    bool takeFee
  ) private {
    if (!takeFee) removeAllFee();

    if (_isExcluded[sender] && !_isExcluded[recipient]) {
      _transferFromExcluded(sender, recipient, amount);
    } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
      _transferToExcluded(sender, recipient, amount);
    } else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
      _transferStandard(sender, recipient, amount);
    } else if (_isExcluded[sender] && _isExcluded[recipient]) {
      _transferBothExcluded(sender, recipient, amount);
    } else {
      _transferStandard(sender, recipient, amount);
    }

    if (!takeFee) restoreAllFee();
  }

  function _transferStandard(
    address sender,
    address recipient,
    uint256 tAmount
  ) private {
    (
      uint256 rAmount,
      uint256 rTransferAmount,
      uint256 rFee,
      uint256 tTransferAmount,
      uint256 tFee,
      uint256 tLiquidity
    ) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
    _takeLiquidity(tLiquidity);
    _reflectFee(rFee, tFee);
    emit Transfer(sender, recipient, tTransferAmount);
  }

  function _transferToExcluded(
    address sender,
    address recipient,
    uint256 tAmount
  ) private {
    (
      uint256 rAmount,
      uint256 rTransferAmount,
      uint256 rFee,
      uint256 tTransferAmount,
      uint256 tFee,
      uint256 tLiquidity
    ) = _getValues(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
    _takeLiquidity(tLiquidity);
    _reflectFee(rFee, tFee);
    emit Transfer(sender, recipient, tTransferAmount);
  }

  function _transferFromExcluded(
    address sender,
    address recipient,
    uint256 tAmount
  ) private {
    (
      uint256 rAmount,
      uint256 rTransferAmount,
      uint256 rFee,
      uint256 tTransferAmount,
      uint256 tFee,
      uint256 tLiquidity
    ) = _getValues(tAmount);
    _tOwned[sender] = _tOwned[sender].sub(tAmount);
    _rOwned[sender] = _rOwned[sender].sub(rAmount);
    _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
    _takeLiquidity(tLiquidity);
    _reflectFee(rFee, tFee);
    emit Transfer(sender, recipient, tTransferAmount);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "contracts/MaxRevive.sol": "MaxRevive"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}