// Sources flattened with hardhat v2.8.3 https://hardhat.org

// File @openzeppelin/contracts/utils/Context.sol@v4.5.0

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.5.0

// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @rari-capital/solmate/src/tokens/ERC20.sol@v6.2.0

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*///////////////////////////////////////////////////////////////
                                  EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*///////////////////////////////////////////////////////////////
                             METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*///////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*///////////////////////////////////////////////////////////////
                             EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*///////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*///////////////////////////////////////////////////////////////
                              ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*///////////////////////////////////////////////////////////////
                              EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*///////////////////////////////////////////////////////////////
                       INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}


// File @rari-capital/solmate/src/utils/SafeTransferLib.sol@v6.2.0

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    event Debug(bool one, bool two, uint256 retsize);

    /*///////////////////////////////////////////////////////////////
                            ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*///////////////////////////////////////////////////////////////
                           ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
            mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}


// File @rari-capital/solmate/src/utils/FixedPointMathLib.sol@v6.2.0

/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
    /*///////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.

    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }

    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }

    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }

    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }

    /*///////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)

            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }

            // Divide z by the denominator.
            z := div(z, denominator)
        }
    }

    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)

            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }

            // First, divide z - 1 by the denominator and add 1.
            // We allow z - 1 to underflow if z is 0, because we multiply the
            // end result by 0 if z is zero, ensuring we return 0 if z is zero.
            z := mul(iszero(iszero(z)), add(div(sub(z, 1), denominator), 1))
        }
    }

    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }

                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)

                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }

                    // Store x squared.
                    let xx := mul(x, x)

                    // Round to the nearest number.
                    let xxRound := add(xx, half)

                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }

                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)

                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)

                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }

                        // Round to the nearest number.
                        let zxRound := add(zx, half)

                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }

                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }

    /*///////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/

    function sqrt(uint256 x) internal pure returns (uint256 z) {
        assembly {
            // Start off with z at 1.
            z := 1

            // Used below to help find a nearby power of 2.
            let y := x

            // Find the lowest power of 2 that is at least sqrt(x).
            if iszero(lt(y, 0x100000000000000000000000000000000)) {
                y := shr(128, y) // Like dividing by 2 ** 128.
                z := shl(64, z) // Like multiplying by 2 ** 64.
            }
            if iszero(lt(y, 0x10000000000000000)) {
                y := shr(64, y) // Like dividing by 2 ** 64.
                z := shl(32, z) // Like multiplying by 2 ** 32.
            }
            if iszero(lt(y, 0x100000000)) {
                y := shr(32, y) // Like dividing by 2 ** 32.
                z := shl(16, z) // Like multiplying by 2 ** 16.
            }
            if iszero(lt(y, 0x10000)) {
                y := shr(16, y) // Like dividing by 2 ** 16.
                z := shl(8, z) // Like multiplying by 2 ** 8.
            }
            if iszero(lt(y, 0x100)) {
                y := shr(8, y) // Like dividing by 2 ** 8.
                z := shl(4, z) // Like multiplying by 2 ** 4.
            }
            if iszero(lt(y, 0x10)) {
                y := shr(4, y) // Like dividing by 2 ** 4.
                z := shl(2, z) // Like multiplying by 2 ** 2.
            }
            if iszero(lt(y, 0x8)) {
                // Equivalent to 2 ** z.
                z := shl(1, z)
            }

            // Shifting right by 1 is like dividing by 2.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))

            // Compute a rounded down version of z.
            let zRoundDown := div(x, z)

            // If zRoundDown is smaller, use it.
            if lt(zRoundDown, z) {
                z := zRoundDown
            }
        }
    }
}


// File @rari-capital/solmate/src/mixins/ERC4626.sol@v6.2.0



/// @notice Minimal ERC4626 tokenized Vault implementation.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/mixins/ERC4626.sol)
abstract contract ERC4626 is ERC20 {
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    /*///////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Deposit(address indexed caller, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed caller,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /*///////////////////////////////////////////////////////////////
                               IMMUTABLES
    //////////////////////////////////////////////////////////////*/

    ERC20 public immutable asset;

    constructor(
        ERC20 _asset,
        string memory _name,
        string memory _symbol
    ) ERC20(_name, _symbol, _asset.decimals()) {
        asset = _asset;
    }

    /*///////////////////////////////////////////////////////////////
                        DEPOSIT/WITHDRAWAL LOGIC
    //////////////////////////////////////////////////////////////*/

    function deposit(uint256 assets, address receiver) public virtual returns (uint256 shares) {
        // Check for rounding error since we round down in previewDeposit.
        require((shares = previewDeposit(assets)) != 0, "ZERO_SHARES");

        // Need to transfer before minting or ERC777s could reenter.
        asset.safeTransferFrom(msg.sender, address(this), assets);

        _mint(receiver, shares);

        emit Deposit(msg.sender, receiver, assets, shares);

        afterDeposit(assets, shares);
    }

    function mint(uint256 shares, address receiver) public virtual returns (uint256 assets) {
        assets = previewMint(shares); // No need to check for rounding error, previewMint rounds up.

        // Need to transfer before minting or ERC777s could reenter.
        asset.safeTransferFrom(msg.sender, address(this), assets);

        _mint(receiver, shares);

        emit Deposit(msg.sender, receiver, assets, shares);

        afterDeposit(assets, shares);
    }

    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) public virtual returns (uint256 shares) {
        shares = previewWithdraw(assets); // No need to check for rounding error, previewWithdraw rounds up.

        if (msg.sender != owner) {
            uint256 allowed = allowance[owner][msg.sender]; // Saves gas for limited approvals.

            if (allowed != type(uint256).max) allowance[owner][msg.sender] = allowed - shares;
        }

        beforeWithdraw(assets, shares);

        _burn(owner, shares);

        emit Withdraw(msg.sender, receiver, owner, assets, shares);

        asset.safeTransfer(receiver, assets);
    }

    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) public virtual returns (uint256 assets) {
        if (msg.sender != owner) {
            uint256 allowed = allowance[owner][msg.sender]; // Saves gas for limited approvals.

            if (allowed != type(uint256).max) allowance[owner][msg.sender] = allowed - shares;
        }

        // Check for rounding error since we round down in previewRedeem.
        require((assets = previewRedeem(shares)) != 0, "ZERO_ASSETS");

        beforeWithdraw(assets, shares);

        _burn(owner, shares);

        emit Withdraw(msg.sender, receiver, owner, assets, shares);

        asset.safeTransfer(receiver, assets);
    }

    /*///////////////////////////////////////////////////////////////
                           ACCOUNTING LOGIC
    //////////////////////////////////////////////////////////////*/

    function totalAssets() public view virtual returns (uint256);

    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        uint256 supply = totalSupply; // Saves an extra SLOAD if totalSupply is non-zero.

        return supply == 0 ? assets : assets.mulDivDown(supply, totalAssets());
    }

    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        uint256 supply = totalSupply; // Saves an extra SLOAD if totalSupply is non-zero.

        return supply == 0 ? shares : shares.mulDivDown(totalAssets(), supply);
    }

    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return convertToShares(assets);
    }

    function previewMint(uint256 shares) public view virtual returns (uint256) {
        uint256 supply = totalSupply; // Saves an extra SLOAD if totalSupply is non-zero.

        return supply == 0 ? shares : shares.mulDivUp(totalAssets(), supply);
    }

    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        uint256 supply = totalSupply; // Saves an extra SLOAD if totalSupply is non-zero.

        return supply == 0 ? assets : assets.mulDivUp(supply, totalAssets());
    }

    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return convertToAssets(shares);
    }

    /*///////////////////////////////////////////////////////////////
                     DEPOSIT/WITHDRAWAL LIMIT LOGIC
    //////////////////////////////////////////////////////////////*/

    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return convertToAssets(balanceOf[owner]);
    }

    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf[owner];
    }

    /*///////////////////////////////////////////////////////////////
                         INTERNAL HOOKS LOGIC
    //////////////////////////////////////////////////////////////*/

    function beforeWithdraw(uint256 assets, uint256 shares) internal virtual {}

    function afterDeposit(uint256 assets, uint256 shares) internal virtual {}
}


// File contracts/vault/UnionPirexStaking.sol



// https://docs.synthetix.io/contracts/source/contracts/StakingRewards/
// https://github.com/Synthetixio/synthetix/blob/v2.66.0/contracts/StakingRewards.sol
/**
  Modifications
    - Pin pragma to 0.8.12
    - Remove IStakingRewards, RewardsDistributionRecipient, and Pausable
    - Add and inherit from Ownable
    - Add `RewardsDistributionRecipient` logic to contract
    - Add `vault` state variable and `onlyVault` modifier
    - Add `onlyVault` modifier to `stake` method
    - Change `rewardsDuration` to 14 days
    - Update contract to support only the vault as a user
    - Remove SafeMath since pragma 0.8.0 has those checks built-in
    - Replace OpenZeppelin ERC20, ReentrancyGuard, and SafeERC20 with Solmate v6 (audited)
    - Consolidate `rewardsToken` and `stakingToken` since they're the same
    - Remove `onlyVault` modifier from getReward
    - Remove ReentrancyGuard as it is no longer needed
    - Add `totalSupplyWithRewards` method to save gas as _totalSupply + rewards are accessed by vault
    - Updated `notifyRewardsAmount`
        - Remove the method parameter and compute the reward amount inside the function
        - Remove the conditional logic since we will always distribute the rewards balance
        - Remove overflow check since the caller cannot pass in the reward amount
*/
contract UnionPirexStaking is Ownable {
    using SafeTransferLib for ERC20;

    /* ========== STATE VARIABLES ========== */

    address public immutable vault;
    ERC20 public immutable token;

    uint256 public constant rewardsDuration = 14 days;

    address public distributor;
    uint256 public periodFinish;
    uint256 public rewardRate;
    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;
    uint256 public userRewardPerTokenPaid;
    uint256 public rewards;

    uint256 internal _totalSupply;

    /* ========== CONSTRUCTOR ========== */

    constructor(
        address _token,
        address _distributor,
        address _vault
    ) {
        token = ERC20(_token);
        distributor = _distributor;
        vault = _vault;
    }

    /* ========== VIEWS ========== */

    function totalSupply() external view returns (uint256) {
        return _totalSupply;
    }

    function totalSupplyWithRewards() external view returns (uint256, uint256) {
        uint256 t = _totalSupply;

        return (
            t,
            ((t * (rewardPerToken() - userRewardPerTokenPaid)) / 1e18) + rewards
        );
    }

    function lastTimeRewardApplicable() public view returns (uint256) {
        return block.timestamp < periodFinish ? block.timestamp : periodFinish;
    }

    function rewardPerToken() public view returns (uint256) {
        if (_totalSupply == 0) {
            return rewardPerTokenStored;
        }

        return
            rewardPerTokenStored +
            ((((lastTimeRewardApplicable() - lastUpdateTime) * rewardRate) *
                1e18) / _totalSupply);
    }

    function earned() public view returns (uint256) {
        return
            ((_totalSupply * (rewardPerToken() - userRewardPerTokenPaid)) /
                1e18) + rewards;
    }

    function getRewardForDuration() external view returns (uint256) {
        return rewardRate * rewardsDuration;
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function stake(uint256 amount) external onlyVault updateReward(vault) {
        require(amount > 0, "Cannot stake 0");
        _totalSupply += amount;
        token.safeTransferFrom(vault, address(this), amount);
        emit Staked(amount);
    }

    function withdraw(uint256 amount) external onlyVault updateReward(vault) {
        require(amount > 0, "Cannot withdraw 0");
        _totalSupply -= amount;
        token.safeTransfer(vault, amount);
        emit Withdrawn(amount);
    }

    function getReward() external updateReward(vault) {
        uint256 reward = rewards;

        if (reward > 0) {
            rewards = 0;
            token.safeTransfer(vault, reward);
            emit RewardPaid(reward);
        }
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    function notifyRewardAmount()
        external
        onlyDistributor
        updateReward(address(0))
    {
        // Rewards transferred directly to this contract are not added to _totalSupply
        // To get the rewards w/o relying on a potentially incorrect passed in arg,
        // we can use the difference between the token balance and _totalSupply.
        // Additionally, to avoid re-distributing rewards, deduct the output of `earned`
        uint256 rewardBalance = token.balanceOf(address(this)) -
            _totalSupply -
            earned();

        rewardRate = rewardBalance / rewardsDuration;
        require(rewardRate != 0, "No rewards");

        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp + rewardsDuration;

        emit RewardAdded(rewardBalance);
    }

    // Added to support recovering LP Rewards from other systems such as BAL to be distributed to holders
    function recoverERC20(address tokenAddress, uint256 tokenAmount)
        external
        onlyOwner
    {
        require(
            tokenAddress != address(token),
            "Cannot withdraw the staking token"
        );
        ERC20(tokenAddress).safeTransfer(owner(), tokenAmount);
        emit Recovered(tokenAddress, tokenAmount);
    }

    function setDistributor(address _distributor) external onlyOwner {
        require(_distributor != address(0));
        distributor = _distributor;
    }

    /* ========== MODIFIERS ========== */

    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        if (account != address(0)) {
            rewards = earned();
            userRewardPerTokenPaid = rewardPerTokenStored;
        }
        _;
    }

    /* ========== EVENTS ========== */

    event RewardAdded(uint256 reward);
    event Staked(uint256 amount);
    event Withdrawn(uint256 amount);
    event RewardPaid(uint256 reward);
    event Recovered(address token, uint256 amount);

    modifier onlyDistributor() {
        require((msg.sender == distributor), "Distributor only");
        _;
    }

    modifier onlyVault() {
        require((msg.sender == vault), "Vault only");
        _;
    }
}


// File contracts/vault/UnionPirexVault.sol


// SPDX-License-Identifier: MIT
pragma solidity 0.8.12;



contract UnionPirexVault is Ownable, ERC4626 {
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    UnionPirexStaking public strategy;

    uint256 public constant MAX_WITHDRAWAL_PENALTY = 500;
    uint256 public constant MAX_PLATFORM_FEE = 2000;
    uint256 public constant FEE_DENOMINATOR = 10000;

    uint256 public withdrawalPenalty = 300;
    uint256 public platformFee = 1000;
    address public platform;

    event Harvest(address indexed caller, uint256 value);
    event WithdrawalPenaltyUpdated(uint256 penalty);
    event PlatformFeeUpdated(uint256 fee);
    event PlatformUpdated(address indexed _platform);
    event StrategySet(address indexed _strategy);

    error ZeroAddress();
    error ExceedsMax();
    error AlreadySet();

    constructor(address pxCvx) ERC4626(ERC20(pxCvx), "Union Pirex", "uCVX") {}

    /**
        @notice Set the withdrawal penalty
        @param  penalty  uint256  Withdrawal penalty
     */
    function setWithdrawalPenalty(uint256 penalty) external onlyOwner {
        if (penalty > MAX_WITHDRAWAL_PENALTY) revert ExceedsMax();

        withdrawalPenalty = penalty;

        emit WithdrawalPenaltyUpdated(penalty);
    }

    /**
        @notice Set the platform fee
        @param  fee  uint256  Platform fee
     */
    function setPlatformFee(uint256 fee) external onlyOwner {
        if (fee > MAX_PLATFORM_FEE) revert ExceedsMax();

        platformFee = fee;

        emit PlatformFeeUpdated(fee);
    }

    /**
        @notice Set the platform
        @param  _platform  address  Platform
     */
    function setPlatform(address _platform) external onlyOwner {
        if (_platform == address(0)) revert ZeroAddress();

        platform = _platform;

        emit PlatformUpdated(_platform);
    }

    /**
        @notice Set the strategy
        @param  _strategy  address  Strategy
     */
    function setStrategy(address _strategy) external onlyOwner {
        if (_strategy == address(0)) revert ZeroAddress();
        if (address(strategy) != address(0)) revert AlreadySet();

        // Set new strategy contract and approve max allowance
        strategy = UnionPirexStaking(_strategy);

        asset.safeApprove(_strategy, type(uint256).max);

        emit StrategySet(_strategy);
    }

    /**
        @notice Get the pxCVX custodied by the UnionPirex contracts
        @return uint256  Assets
     */
    function totalAssets() public view override returns (uint256) {
        // Vault assets + rewards should always be stored in strategy until withdrawal-time
        (uint256 _totalSupply, uint256 rewards) = strategy
            .totalSupplyWithRewards();

        // Deduct the exact reward amount staked (after fees are deducted when calling `harvest`)
        return
            _totalSupply +
            (
                rewards == 0
                    ? 0
                    : (rewards - ((rewards * platformFee) / FEE_DENOMINATOR))
            );
    }

    /**
        @notice Withdraw assets from the staking contract to prepare for transfer to user
        @param  assets  uint256  Assets
     */
    function beforeWithdraw(uint256 assets, uint256) internal override {
        // Harvest rewards in the event where there is not enough staked assets to cover the withdrawal
        if (assets > strategy.totalSupply()) harvest();

        strategy.withdraw(assets);
    }

    /**
        @notice Stake assets so that rewards can be properly distributed
        @param  assets  uint256  Assets
     */
    function afterDeposit(uint256 assets, uint256) internal override {
        strategy.stake(assets);
    }

    /**
        @notice Preview the amount of assets a user would receive from redeeming shares
        @param  shares  uint256  Shares
        @return uint256  Assets
     */
    function previewRedeem(uint256 shares)
        public
        view
        override
        returns (uint256)
    {
        // Calculate assets based on a user's % ownership of vault shares
        uint256 assets = convertToAssets(shares);

        uint256 _totalSupply = totalSupply;

        // Calculate a penalty - zero if user is the last to withdraw
        uint256 penalty = (_totalSupply == 0 || _totalSupply - shares == 0)
            ? 0
            : assets.mulDivDown(withdrawalPenalty, FEE_DENOMINATOR);

        // Redeemable amount is the post-penalty amount
        return assets - penalty;
    }

    /**
        @notice Preview the amount of shares a user would need to redeem the specified asset amount
        @notice This modified version takes into consideration the withdrawal fee
        @param  assets  uint256  Assets
        @return uint256  Shares
     */
    function previewWithdraw(uint256 assets)
        public
        view
        override
        returns (uint256)
    {
        // Calculate shares based on the specified assets' proportion of the pool
        uint256 shares = convertToShares(assets);

        // Save 1 SLOAD
        uint256 _totalSupply = totalSupply;

        // Factor in additional shares to fulfill withdrawal if user is not the last to withdraw
        return
            (_totalSupply == 0 || _totalSupply - shares == 0)
                ? shares
                : (shares * FEE_DENOMINATOR) /
                    (FEE_DENOMINATOR - withdrawalPenalty);
    }

    /**
        @notice Harvest rewards
     */
    function harvest() public {
        // Claim rewards
        strategy.getReward();

        // Since we don't normally store pxCVX within the vault, a non-zero balance equals rewards
        uint256 rewards = asset.balanceOf(address(this));

        emit Harvest(msg.sender, rewards);

        if (rewards != 0) {
            // Fee for platform
            uint256 feeAmount = (rewards * platformFee) / FEE_DENOMINATOR;

            // Deduct fee from reward balance
            rewards -= feeAmount;

            // Claimed rewards should be in pxCVX
            asset.safeTransfer(platform, feeAmount);

            // Stake rewards sans fee
            strategy.stake(rewards);
        }
    }
}

{
  "compilationTarget": {
    "UnionPirexVault.sol": "UnionPirexVault"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 179
  },
  "remappings": []
}