// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IAdminControl.sol";

abstract contract AdminControl is Ownable, IAdminControl, ERC165 {
    using EnumerableSet for EnumerableSet.AddressSet;

    // Track registered admins
    EnumerableSet.AddressSet private _admins;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IAdminControl).interfaceId
            || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Only allows approved admins to call the specified function
     */
    modifier adminRequired() {
        require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
        _;
    }   

    /**
     * @dev See {IAdminControl-getAdmins}.
     */
    function getAdmins() external view override returns (address[] memory admins) {
        admins = new address[](_admins.length());
        for (uint i = 0; i < _admins.length(); i++) {
            admins[i] = _admins.at(i);
        }
        return admins;
    }

    /**
     * @dev See {IAdminControl-approveAdmin}.
     */
    function approveAdmin(address admin) external override onlyOwner {
        if (!_admins.contains(admin)) {
            emit AdminApproved(admin, msg.sender);
            _admins.add(admin);
        }
    }

    /**
     * @dev See {IAdminControl-revokeAdmin}.
     */
    function revokeAdmin(address admin) external override onlyOwner {
        if (_admins.contains(admin)) {
            emit AdminRevoked(admin, msg.sender);
            _admins.remove(admin);
        }
    }

    /**
     * @dev See {IAdminControl-isAdmin}.
     */
    function isAdmin(address admin) public override view returns (bool) {
        return (owner() == admin || _admins.contains(admin));
    }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";

import "../extensions/ICreatorExtensionTokenURI.sol";
import "../extensions/ICreatorExtensionRoyalties.sol";

import "./ICreatorCore.sol";

/**
 * @dev Core creator implementation
 */
abstract contract CreatorCore is ReentrancyGuard, ICreatorCore, ERC165 {
    using Strings for uint256;
    using EnumerableSet for EnumerableSet.AddressSet;
    using AddressUpgradeable for address;

    uint256 internal _tokenCount = 0;

    // Base approve transfers address location
    address internal _approveTransferBase;

    // Track registered extensions data
    EnumerableSet.AddressSet internal _extensions;
    EnumerableSet.AddressSet internal _blacklistedExtensions;

    // The baseURI for a given extension
    mapping (address => string) private _extensionBaseURI;
    mapping (address => bool) private _extensionBaseURIIdentical;

    // The prefix for any tokens with a uri configured
    mapping (address => string) private _extensionURIPrefix;

    // Mapping for individual token URIs
    mapping (uint256 => string) internal _tokenURIs;

    // Royalty configurations
    struct RoyaltyConfig {
        address payable receiver;
        uint16 bps;
    }
    mapping (address => RoyaltyConfig[]) internal _extensionRoyalty;
    mapping (uint256 => RoyaltyConfig[]) internal _tokenRoyalty;

    bytes4 private constant _CREATOR_CORE_V1 = 0x28f10a21;

    /**
     * External interface identifiers for royalties
     */

    /**
     *  @dev CreatorCore
     *
     *  bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
     *
     *  => 0xbb3bafd6 = 0xbb3bafd6
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_CREATORCORE = 0xbb3bafd6;

    /**
     *  @dev Rarible: RoyaltiesV1
     *
     *  bytes4(keccak256('getFeeRecipients(uint256)')) == 0xb9c4d9fb
     *  bytes4(keccak256('getFeeBps(uint256)')) == 0x0ebd4c7f
     *
     *  => 0xb9c4d9fb ^ 0x0ebd4c7f = 0xb7799584
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_RARIBLE = 0xb7799584;

    /**
     *  @dev Foundation
     *
     *  bytes4(keccak256('getFees(uint256)')) == 0xd5a06d4c
     *
     *  => 0xd5a06d4c = 0xd5a06d4c
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_FOUNDATION = 0xd5a06d4c;

    /**
     *  @dev EIP-2981
     *
     * bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
     *
     * => 0x2a55205a = 0x2a55205a
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_EIP2981 = 0x2a55205a;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(ICreatorCore).interfaceId || interfaceId == _CREATOR_CORE_V1 || super.supportsInterface(interfaceId)
            || interfaceId == _INTERFACE_ID_ROYALTIES_CREATORCORE || interfaceId == _INTERFACE_ID_ROYALTIES_RARIBLE
            || interfaceId == _INTERFACE_ID_ROYALTIES_FOUNDATION || interfaceId == _INTERFACE_ID_ROYALTIES_EIP2981;
    }

    /**
     * @dev Only allows registered extensions to call the specified function
     */
    function requireExtension() internal view {
        require(_extensions.contains(msg.sender), "Must be registered extension");
    }

    /**
     * @dev Only allows non-blacklisted extensions
     */
    function requireNonBlacklist(address extension) internal view {
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
    }   

    /**
     * @dev See {ICreatorCore-getExtensions}.
     */
    function getExtensions() external view override returns (address[] memory extensions) {
        extensions = new address[](_extensions.length());
        for (uint i; i < _extensions.length();) {
            extensions[i] = _extensions.at(i);
            unchecked { ++i; }
        }
        return extensions;
    }

    /**
     * @dev Register an extension
     */
    function _registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) internal virtual {
        require(extension != address(this) && extension.isContract(), "Invalid");
        emit ExtensionRegistered(extension, msg.sender);
        _extensionBaseURI[extension] = baseURI;
        _extensionBaseURIIdentical[extension] = baseURIIdentical;
        _extensions.add(extension);
        _setApproveTransferExtension(extension, true);
    }

    /**
     * @dev See {ICreatorCore-setApproveTransferExtension}.
     */
    function setApproveTransferExtension(bool enabled) external override {
        requireExtension();
        _setApproveTransferExtension(msg.sender, enabled);
    }

    /**
     * @dev Set whether or not tokens minted by the extension defers transfer approvals to the extension
     */
    function _setApproveTransferExtension(address extension, bool enabled) internal virtual;

    /**
     * @dev Unregister an extension
     */
    function _unregisterExtension(address extension) internal {
        emit ExtensionUnregistered(extension, msg.sender);
        _extensions.remove(extension);
    }

    /**
     * @dev Blacklist an extension
     */
    function _blacklistExtension(address extension) internal {
       require(extension != address(0) && extension != address(this), "Cannot blacklist yourself");
       if (_extensions.contains(extension)) {
           emit ExtensionUnregistered(extension, msg.sender);
           _extensions.remove(extension);
       }
       if (!_blacklistedExtensions.contains(extension)) {
           emit ExtensionBlacklisted(extension, msg.sender);
           _blacklistedExtensions.add(extension);
       }
    }

    /**
     * @dev Set base token uri for an extension
     */
    function _setBaseTokenURIExtension(string calldata uri, bool identical) internal {
        _extensionBaseURI[msg.sender] = uri;
        _extensionBaseURIIdentical[msg.sender] = identical;
    }

    /**
     * @dev Set token uri prefix for an extension
     */
    function _setTokenURIPrefixExtension(string calldata prefix) internal {
        _extensionURIPrefix[msg.sender] = prefix;
    }

    /**
     * @dev Set token uri for a token of an extension
     */
    function _setTokenURIExtension(uint256 tokenId, string calldata uri) internal {
        require(_tokenExtension(tokenId) == msg.sender, "Invalid token");
        _tokenURIs[tokenId] = uri;
    }

    /**
     * @dev Set base token uri for tokens with no extension
     */
    function _setBaseTokenURI(string calldata uri) internal {
        _extensionBaseURI[address(0)] = uri;
    }

    /**
     * @dev Set token uri prefix for tokens with no extension
     */
    function _setTokenURIPrefix(string calldata prefix) internal {
        _extensionURIPrefix[address(0)] = prefix;
    }


    /**
     * @dev Set token uri for a token with no extension
     */
    function _setTokenURI(uint256 tokenId, string calldata uri) internal {
        require(tokenId > 0 && tokenId <= _tokenCount && _tokenExtension(tokenId) == address(0), "Invalid token");
        _tokenURIs[tokenId] = uri;
    }

    /**
     * @dev Retrieve a token's URI
     */
    function _tokenURI(uint256 tokenId) internal view returns (string memory) {
        require(tokenId > 0 && tokenId <= _tokenCount, "Invalid token");

        address extension = _tokenExtension(tokenId);
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");

        if (bytes(_tokenURIs[tokenId]).length != 0) {
            if (bytes(_extensionURIPrefix[extension]).length != 0) {
                return string(abi.encodePacked(_extensionURIPrefix[extension], _tokenURIs[tokenId]));
            }
            return _tokenURIs[tokenId];
        }

        if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionTokenURI).interfaceId)) {
            return ICreatorExtensionTokenURI(extension).tokenURI(address(this), tokenId);
        }

        if (!_extensionBaseURIIdentical[extension]) {
            return string(abi.encodePacked(_extensionBaseURI[extension], tokenId.toString()));
        } else {
            return _extensionBaseURI[extension];
        }
    }

    /**
     * Helper to get royalties for a token
     */
    function _getRoyalties(uint256 tokenId) view internal returns (address payable[] memory receivers, uint256[] memory bps) {

        // Get token level royalties
        RoyaltyConfig[] memory royalties = _tokenRoyalty[tokenId];
        if (royalties.length == 0) {
            // Get extension specific royalties
            address extension = _tokenExtension(tokenId);
            if (extension != address(0)) {
                if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionRoyalties).interfaceId)) {
                    (receivers, bps) = ICreatorExtensionRoyalties(extension).getRoyalties(address(this), tokenId);
                    // Extension override exists, just return that
                    if (receivers.length > 0) return (receivers, bps);
                }
                royalties = _extensionRoyalty[extension];
            }
        }
        if (royalties.length == 0) {
            // Get the default royalty
            royalties = _extensionRoyalty[address(0)];
        }
        
        if (royalties.length > 0) {
            receivers = new address payable[](royalties.length);
            bps = new uint256[](royalties.length);
            for (uint i; i < royalties.length;) {
                receivers[i] = royalties[i].receiver;
                bps[i] = royalties[i].bps;
                unchecked { ++i; }
            }
        }
    }

    /**
     * Helper to get royalty receivers for a token
     */
    function _getRoyaltyReceivers(uint256 tokenId) view internal returns (address payable[] memory recievers) {
        (recievers, ) = _getRoyalties(tokenId);
    }

    /**
     * Helper to get royalty basis points for a token
     */
    function _getRoyaltyBPS(uint256 tokenId) view internal returns (uint256[] memory bps) {
        (, bps) = _getRoyalties(tokenId);
    }

    function _getRoyaltyInfo(uint256 tokenId, uint256 value) view internal returns (address receiver, uint256 amount){
        (address payable[] memory receivers, uint256[] memory bps) = _getRoyalties(tokenId);
        require(receivers.length <= 1, "More than 1 royalty receiver");
        
        if (receivers.length == 0) {
            return (address(this), 0);
        }
        return (receivers[0], bps[0]*value/10000);
    }

    /**
     * Set royalties for a token
     */
    function _setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
       _checkRoyalties(receivers, basisPoints);
        delete _tokenRoyalty[tokenId];
        _setRoyalties(receivers, basisPoints, _tokenRoyalty[tokenId]);
        emit RoyaltiesUpdated(tokenId, receivers, basisPoints);
    }

    /**
     * Set royalties for all tokens of an extension
     */
    function _setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
        _checkRoyalties(receivers, basisPoints);
        delete _extensionRoyalty[extension];
        _setRoyalties(receivers, basisPoints, _extensionRoyalty[extension]);
        if (extension == address(0)) {
            emit DefaultRoyaltiesUpdated(receivers, basisPoints);
        } else {
            emit ExtensionRoyaltiesUpdated(extension, receivers, basisPoints);
        }
    }

    /**
     * Helper function to check that royalties provided are valid
     */
    function _checkRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) private pure {
        require(receivers.length == basisPoints.length, "Invalid input");
        uint256 totalBasisPoints;
        for (uint i; i < basisPoints.length;) {
            totalBasisPoints += basisPoints[i];
            unchecked { ++i; }
        }
        require(totalBasisPoints < 10000, "Invalid total royalties");
    }

    /**
     * Helper function to set royalties
     */
    function _setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints, RoyaltyConfig[] storage royalties) private {
        for (uint i; i < basisPoints.length;) {
            royalties.push(
                RoyaltyConfig(
                    {
                        receiver: receivers[i],
                        bps: uint16(basisPoints[i])
                    }
                )
            );
            unchecked { ++i; }
        }
    }

    /**
     * @dev Set the base contract's approve transfer contract location
     */
    function _setApproveTransferBase(address extension) internal {
        _approveTransferBase = extension;
        emit ApproveTransferUpdated(extension);
    }

    /**
     * @dev See {ICreatorCore-getApproveTransfer}.
     */
    function getApproveTransfer() external view override returns (address) {
        return _approveTransferBase;
    }

    /**
     * @dev Get the extension for the given token
     */
    function _tokenExtension(uint256 tokenId) internal virtual view returns(address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// solhint-disable reason-string
pragma solidity ^0.8.0;

import "@manifoldxyz/creator-core-solidity/contracts/core/IERC1155CreatorCore.sol";
import "@manifoldxyz/creator-core-solidity/contracts/extensions/ICreatorExtensionTokenURI.sol";

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

import "./LazyPayableClaim.sol";
import "./IERC1155LazyPayableClaim.sol";

/**
 * @title Lazy Payable Claim
 * @author manifold.xyz
 * @notice Lazy claim with optional whitelist ERC1155 tokens
 */
contract ERC1155LazyPayableClaim is IERC165, IERC1155LazyPayableClaim, ICreatorExtensionTokenURI, LazyPayableClaim {
    using Strings for uint256;

    // stores mapping from contractAddress/instanceId to the claim it represents
    // { contractAddress => { instanceId => Claim } }
    mapping(address => mapping(uint256 => Claim)) private _claims;

    // { contractAddress => { tokenId => { instanceId } }
    mapping(address => mapping(uint256 => uint256)) private _claimTokenIds;

    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, AdminControl) returns (bool) {
        return interfaceId == type(IERC1155LazyPayableClaim).interfaceId ||
            interfaceId == type(ILazyPayableClaim).interfaceId ||
            interfaceId == type(ICreatorExtensionTokenURI).interfaceId ||
            interfaceId == type(IAdminControl).interfaceId ||
            interfaceId == type(IERC165).interfaceId;
    }

    constructor(address initialOwner, address delegationRegistry) LazyPayableClaim(initialOwner, delegationRegistry) {}

    /**
     * See {IERC1155LazyClaim-initializeClaim}.
     */
    function initializeClaim(
        address creatorContractAddress,
        uint256 instanceId,
        ClaimParameters calldata claimParameters
    ) external override creatorAdminRequired(creatorContractAddress) {
        // Revert if claim at instanceId already exists
        require(_claims[creatorContractAddress][instanceId].storageProtocol == StorageProtocol.INVALID, "Claim already initialized");

        // Sanity checks
        require(claimParameters.storageProtocol != StorageProtocol.INVALID, "Cannot initialize with invalid storage protocol");
        require(claimParameters.endDate == 0 || claimParameters.startDate < claimParameters.endDate, "Cannot have startDate greater than or equal to endDate");
        require(claimParameters.merkleRoot == "" || claimParameters.walletMax == 0, "Cannot provide both walletMax and merkleRoot");

        address[] memory receivers = new address[](1);
        receivers[0] = msg.sender;
        string[] memory uris = new string[](1);
        uint256[] memory amounts = new uint256[](1);
        uint256[] memory newTokenIds = IERC1155CreatorCore(creatorContractAddress).mintExtensionNew(receivers, amounts, uris);

         // Create the claim
        _claims[creatorContractAddress][instanceId] = Claim({
            total: 0,
            totalMax: claimParameters.totalMax,
            walletMax: claimParameters.walletMax,
            startDate: claimParameters.startDate,
            endDate: claimParameters.endDate,
            storageProtocol: claimParameters.storageProtocol,
            merkleRoot: claimParameters.merkleRoot,
            location: claimParameters.location,
            tokenId: newTokenIds[0],
            cost: claimParameters.cost,
            paymentReceiver: claimParameters.paymentReceiver,
            erc20: claimParameters.erc20,
            signingAddress: claimParameters.signingAddress
        });
        _claimTokenIds[creatorContractAddress][newTokenIds[0]] = instanceId;
        
        emit ClaimInitialized(creatorContractAddress, instanceId, msg.sender);
    }

    /**
     * See {IERC1155LazyClaim-updateClaim}.
     */
    function updateClaim(
        address creatorContractAddress,
        uint256 instanceId,
        ClaimParameters memory claimParameters
    ) external override creatorAdminRequired(creatorContractAddress) {
        Claim memory claim = _claims[creatorContractAddress][instanceId];
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        require(claimParameters.storageProtocol != StorageProtocol.INVALID, "Cannot set invalid storage protocol");
        require(claimParameters.endDate == 0 || claimParameters.startDate < claimParameters.endDate, "Cannot have startDate greater than or equal to endDate");
        require(claimParameters.erc20 == claim.erc20, "Cannot change payment token");
        if (claimParameters.totalMax != 0 && claim.total > claimParameters.totalMax) {
            claimParameters.totalMax = claim.total;
        }

        // Overwrite the existing claim
        _claims[creatorContractAddress][instanceId] = Claim({
            total: claim.total,
            totalMax: claimParameters.totalMax,
            walletMax: claimParameters.walletMax,
            startDate: claimParameters.startDate,
            endDate: claimParameters.endDate,
            storageProtocol: claimParameters.storageProtocol,
            merkleRoot: claimParameters.merkleRoot,
            location: claimParameters.location,
            tokenId: claim.tokenId,
            cost: claimParameters.cost,
            paymentReceiver: claimParameters.paymentReceiver,
            erc20: claimParameters.erc20,
            signingAddress: claimParameters.signingAddress
        });
        emit ClaimUpdated(creatorContractAddress, instanceId);
    }

    /**
     * See {IERC1155LazyClaim-updateTokenURIParams}.
     */
    function updateTokenURIParams(
        address creatorContractAddress, uint256 instanceId,
        StorageProtocol storageProtocol,
        string calldata location
    ) external override creatorAdminRequired(creatorContractAddress) {
        Claim storage claim = _claims[creatorContractAddress][instanceId];
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
        require(storageProtocol != StorageProtocol.INVALID, "Cannot set invalid storage protocol");

        claim.storageProtocol = storageProtocol;
        claim.location = location;
        emit ClaimUpdated(creatorContractAddress, instanceId);
    }

    /**
     * See {IERC1155LazyClaim-extendTokenURI}.
     */
    function extendTokenURI(
        address creatorContractAddress, uint256 instanceId,
        string calldata locationChunk
    ) external override creatorAdminRequired(creatorContractAddress) {
        Claim storage claim = _claims[creatorContractAddress][instanceId];
        require(claim.storageProtocol == StorageProtocol.NONE, "Invalid storage protocol");
        claim.location = string(abi.encodePacked(claim.location, locationChunk));
    }

    /**
     * See {IERC1155LazyClaim-getClaim}.
     */
    function getClaim(address creatorContractAddress, uint256 instanceId) public override view returns(Claim memory claim) {
        return _getClaim(creatorContractAddress, instanceId);
    }

    /**
     * See {IERC1155LazyClaim-getClaimForToken}.
     */
    function getClaimForToken(address creatorContractAddress, uint256 tokenId) external override view returns(uint256 instanceId, Claim memory claim) {
        instanceId = _claimTokenIds[creatorContractAddress][tokenId];
        claim = _getClaim(creatorContractAddress, instanceId);
    }

    function _getClaim(address creatorContractAddress, uint256 instanceId) private view returns(Claim storage claim) {
        claim = _claims[creatorContractAddress][instanceId];
        require(claim.storageProtocol != StorageProtocol.INVALID, "Claim not initialized");
    }

    /**
     * See {ILazyPayableClaim-checkMintIndex}.
     */
    function checkMintIndex(address creatorContractAddress, uint256 instanceId, uint32 mintIndex) external override view returns(bool) {
        Claim memory claim = getClaim(creatorContractAddress, instanceId);
        return _checkMintIndex(creatorContractAddress, instanceId, claim.merkleRoot, mintIndex);
    }

    /**
     * See {ILazyPayableClaim-checkMintIndices}.
     */
    function checkMintIndices(address creatorContractAddress, uint256 instanceId, uint32[] calldata mintIndices) external override view returns(bool[] memory minted) {
        Claim memory claim = getClaim(creatorContractAddress, instanceId);
        uint256 mintIndicesLength = mintIndices.length;
        minted = new bool[](mintIndices.length);
        for (uint256 i; i < mintIndicesLength;) {
            minted[i] = _checkMintIndex(creatorContractAddress, instanceId, claim.merkleRoot, mintIndices[i]);
            unchecked{ ++i; }
        }
    }

    /**
     * See {ILazyPayableClaim-getTotalMints}.
     */
    function getTotalMints(address minter, address creatorContractAddress, uint256 instanceId) external override view returns(uint32) {
        Claim memory claim = getClaim(creatorContractAddress, instanceId);
        return _getTotalMints(claim.walletMax, minter, creatorContractAddress, instanceId);
    }

    /**
     * See {ILazyPayableClaim-mint}.
     */
    function mint(address creatorContractAddress, uint256 instanceId, uint32 mintIndex, bytes32[] calldata merkleProof, address mintFor) external payable override {
        Claim storage claim = _getClaim(creatorContractAddress, instanceId);

        if (claim.signingAddress != address(0)) revert MustUseSignatureMinting();
        // Check totalMax
        require(++claim.total <= claim.totalMax || claim.totalMax == 0, "Maximum tokens already minted for this claim");

        // Validate mint
        _validateMint(creatorContractAddress, instanceId, claim.startDate, claim.endDate, claim.walletMax, claim.merkleRoot, mintIndex, merkleProof, mintFor);

        // Transfer funds
        _transferFunds(claim.erc20, claim.cost, claim.paymentReceiver, 1, claim.merkleRoot != "", true);

        // Do mint
        address[] memory recipients = new address[](1);
        recipients[0] = msg.sender;
        uint256[] memory amounts = new uint256[](1);
        amounts[0] = 1;
        _mintClaim(creatorContractAddress, claim, recipients, amounts);

        emit ClaimMint(creatorContractAddress, instanceId);
    }

    /**
     * See {ILazyPayableClaim-mintBatch}.
     */
    function mintBatch(address creatorContractAddress, uint256 instanceId, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) external payable override {
        Claim storage claim = _getClaim(creatorContractAddress, instanceId);

        if (claim.signingAddress != address(0)) revert MustUseSignatureMinting();
        // Check totalMax
        claim.total += mintCount;
        if ((claim.totalMax != 0 && claim.total > claim.totalMax)) revert TooManyRequested();

        // Validate mint
        _validateMint(creatorContractAddress, instanceId, claim.startDate, claim.endDate, claim.walletMax, claim.merkleRoot, mintCount, mintIndices, merkleProofs, mintFor);

        // Transfer funds
        _transferFunds(claim.erc20, claim.cost, claim.paymentReceiver, mintCount, claim.merkleRoot != "", true);

        // Do mint
        address[] memory recipients = new address[](1);
        recipients[0] = msg.sender;
        uint256[] memory amounts = new uint256[](1);
        amounts[0] = mintCount;
        _mintClaim(creatorContractAddress, claim, recipients, amounts);

        emit ClaimMintBatch(creatorContractAddress, instanceId, mintCount);
    }

    /**
     * See {ILazyPayableClaim-mintProxy}.
     */
    function mintProxy(address creatorContractAddress, uint256 instanceId, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) external payable override {
        Claim storage claim = _getClaim(creatorContractAddress, instanceId);

        if (claim.signingAddress != address(0)) revert MustUseSignatureMinting();
        // Check totalMax
        claim.total += mintCount;
        if ((claim.totalMax != 0 && claim.total > claim.totalMax)) revert TooManyRequested();

        // Validate mint
        _validateMintProxy(creatorContractAddress, instanceId, claim.startDate, claim.endDate, claim.walletMax, claim.merkleRoot, mintCount, mintIndices, merkleProofs, mintFor);

        // Transfer funds
        _transferFunds(claim.erc20, claim.cost, claim.paymentReceiver, mintCount, claim.merkleRoot != "", false);

        // Do mint
        address[] memory recipients = new address[](1);
        recipients[0] = mintFor;
        uint256[] memory amounts = new uint256[](1);
        amounts[0] = mintCount;
        _mintClaim(creatorContractAddress, claim, recipients, amounts);

        emit ClaimMintProxy(creatorContractAddress, instanceId, mintCount, msg.sender, mintFor);
    }

    /**
     * See {ILazyPayableClaim-mintSignature}.
     */
    function mintSignature(address creatorContractAddress, uint256 instanceId, uint16 mintCount, bytes calldata signature, bytes32 message, bytes32 nonce, address mintFor, uint256 expiration) external payable override {
        address creatorContractAddress = creatorContractAddress;
        uint16 mintCount = mintCount;
        Claim storage claim = _getClaim(creatorContractAddress, instanceId);

        // Check totalMax
        claim.total += mintCount;
        if ((claim.totalMax != 0 && claim.total > claim.totalMax)) revert TooManyRequested();
        // Validate mint
        _validateMintSignature(claim.startDate, claim.endDate, signature, claim.signingAddress);
        _checkSignatureAndUpdate(creatorContractAddress, instanceId, signature, message, nonce, claim.signingAddress, mintFor, expiration, mintCount);

        // Transfer funds
        _transferFunds(claim.erc20, claim.cost, claim.paymentReceiver, mintCount, claim.merkleRoot != "", false);

        // Do mint
        address[] memory recipients = new address[](1);
        recipients[0] = mintFor;
        uint256[] memory amounts = new uint256[](1);
        amounts[0] = mintCount;
        _mintClaim(creatorContractAddress, claim, recipients, amounts);

        emit ClaimMintSignature(creatorContractAddress, instanceId, mintCount, msg.sender, mintFor, nonce);
    }

    /**
     * See {IERC1155LazyPayableClaim-airdrop}.
     */
    function airdrop(address creatorContractAddress, uint256 instanceId, address[] calldata recipients,
        uint256[] calldata amounts) external override creatorAdminRequired(creatorContractAddress) {
        require(recipients.length == amounts.length, "Unequal number of recipients and amounts provided");

        // Fetch the claim
        Claim storage claim = _claims[creatorContractAddress][instanceId];

        uint256 totalAmount;
        for (uint256 i; i < amounts.length;) {
            totalAmount += amounts[i];
            unchecked{ ++i; }
        }
        if (totalAmount > MAX_UINT_32) revert TooManyRequested();
        claim.total += uint32(totalAmount);
        if (claim.totalMax != 0 && claim.total > claim.totalMax) {
            claim.totalMax = claim.total;
        }

        // Airdrop the tokens
        _mintClaim(creatorContractAddress, claim, recipients, amounts);
    }

    /**
     * Mint a claim
     */
    function _mintClaim(address creatorContractAddress, Claim storage claim, address[] memory recipients, uint256[] memory amounts) private {
        uint256[] memory tokenIds = new uint256[](1);
        tokenIds[0] = claim.tokenId;
        IERC1155CreatorCore(creatorContractAddress).mintExtensionExisting(recipients, tokenIds, amounts);
    }

    /**
     * See {ICreatorExtensionTokenURI-tokenURI}.
     */
    function tokenURI(address creatorContractAddress, uint256 tokenId) external override view returns(string memory uri) {
        uint224 tokenClaim = uint224(_claimTokenIds[creatorContractAddress][tokenId]);
        require(tokenClaim > 0, "Token does not exist");
        Claim memory claim = _claims[creatorContractAddress][tokenClaim];

        string memory prefix = "";
        if (claim.storageProtocol == StorageProtocol.ARWEAVE) {
            prefix = ARWEAVE_PREFIX;
        } else if (claim.storageProtocol == StorageProtocol.IPFS) {
            prefix = IPFS_PREFIX;
        }
        uri = string(abi.encodePacked(prefix, claim.location));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/introspection/ERC165Checker.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface.
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            supportsERC165InterfaceUnchecked(account, type(IERC165).interfaceId) &&
            !supportsERC165InterfaceUnchecked(account, _INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && supportsERC165InterfaceUnchecked(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(
        address account,
        bytes4[] memory interfaceIds
    ) internal view returns (bool[] memory) {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = supportsERC165InterfaceUnchecked(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!supportsERC165InterfaceUnchecked(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     *
     * Some precompiled contracts will falsely indicate support for a given interface, so caution
     * should be exercised when using this function.
     *
     * Interface identification is specified in ERC-165.
     */
    function supportsERC165InterfaceUnchecked(address account, bytes4 interfaceId) internal view returns (bool) {
        // prepare call
        bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);

        // perform static call
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly {
            success := staticcall(30000, account, add(encodedParams, 0x20), mload(encodedParams), 0x00, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0x00)
        }

        return success && returnSize >= 0x20 && returnValue > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Interface for admin control
 */
interface IAdminControl is IERC165 {

    event AdminApproved(address indexed account, address indexed sender);
    event AdminRevoked(address indexed account, address indexed sender);

    /**
     * @dev gets address of all admins
     */
    function getAdmins() external view returns (address[] memory);

    /**
     * @dev add an admin.  Can only be called by contract owner.
     */
    function approveAdmin(address admin) external;

    /**
     * @dev remove an admin.  Can only be called by contract owner.
     */
    function revokeAdmin(address admin) external;

    /**
     * @dev checks whether or not given address is an admin
     * Returns True if they are
     */
    function isAdmin(address admin) external view returns (bool);

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Core creator interface
 */
interface ICreatorCore is IERC165 {

    event ExtensionRegistered(address indexed extension, address indexed sender);
    event ExtensionUnregistered(address indexed extension, address indexed sender);
    event ExtensionBlacklisted(address indexed extension, address indexed sender);
    event MintPermissionsUpdated(address indexed extension, address indexed permissions, address indexed sender);
    event RoyaltiesUpdated(uint256 indexed tokenId, address payable[] receivers, uint256[] basisPoints);
    event DefaultRoyaltiesUpdated(address payable[] receivers, uint256[] basisPoints);
    event ApproveTransferUpdated(address extension);
    event ExtensionRoyaltiesUpdated(address indexed extension, address payable[] receivers, uint256[] basisPoints);
    event ExtensionApproveTransferUpdated(address indexed extension, bool enabled);

    /**
     * @dev gets address of all extensions
     */
    function getExtensions() external view returns (address[] memory);

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI) external;

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external;

    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * Returns True if removed, False if already removed.
     */
    function unregisterExtension(address extension) external;

    /**
     * @dev blacklist an extension.  Can only be called by contract owner or admin.
     * This function will destroy all ability to reference the metadata of any tokens created
     * by the specified extension. It will also unregister the extension if needed.
     * Returns True if removed, False if already removed.
     */
    function blacklistExtension(address extension) external;

    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     */
    function setBaseTokenURIExtension(string calldata uri) external;

    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURIExtension(string calldata uri, bool identical) external;

    /**
     * @dev set the common prefix of an extension.  Can only be called by extension.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefixExtension(string calldata prefix) external;

    /**
     * @dev set the tokenURI of a token extension.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256 tokenId, string calldata uri) external;

    /**
     * @dev set the tokenURI of a token extension for multiple tokens.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256[] memory tokenId, string[] calldata uri) external;

    /**
     * @dev set the baseTokenURI for tokens with no extension.  Can only be called by owner/admin.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURI(string calldata uri) external;

    /**
     * @dev set the common prefix for tokens with no extension.  Can only be called by owner/admin.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefix(string calldata prefix) external;

    /**
     * @dev set the tokenURI of a token with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256 tokenId, string calldata uri) external;

    /**
     * @dev set the tokenURI of multiple tokens with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external;

    /**
     * @dev set a permissions contract for an extension.  Used to control minting.
     */
    function setMintPermissions(address extension, address permissions) external;

    /**
     * @dev Configure so transfers of tokens created by the caller (must be extension) gets approval
     * from the extension before transferring
     */
    function setApproveTransferExtension(bool enabled) external;

    /**
     * @dev get the extension of a given token
     */
    function tokenExtension(uint256 tokenId) external view returns (address);

    /**
     * @dev Set default royalties
     */
    function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Set royalties of a token
     */
    function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Set royalties of an extension
     */
    function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external;

    /**
     * @dev Get royalites of a token.  Returns list of receivers and basisPoints
     */
    function getRoyalties(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    
    // Royalty support for various other standards
    function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory);
    function getFeeBps(uint256 tokenId) external view returns (uint[] memory);
    function getFees(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    function royaltyInfo(uint256 tokenId, uint256 value) external view returns (address, uint256);

    /**
     * @dev Set the default approve transfer contract location.
     */
    function setApproveTransfer(address extension) external; 

    /**
     * @dev Get the default approve transfer contract location.
     */
    function getApproveTransfer() external view returns (address);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Implement this if you want your extension to have overloadable royalties
 */
interface ICreatorExtensionRoyalties is IERC165 {

    /**
     * Get the royalties for a given creator/tokenId
     */
    function getRoyalties(address creator, uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/**
 * @dev Implement this if you want your extension to have overloadable URI's
 */
interface ICreatorExtensionTokenURI is IERC165 {

    /**
     * Get the uri for a given creator/tokenId
     */
    function tokenURI(address creator, uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: CC0-1.0
pragma solidity ^0.8.9;

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 * from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(address vault, address delegate, address contract_, bool value);

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(address vault, address delegate, address contract_, uint256 tokenId, bool value);

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(address delegate, address contract_, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(address delegate, address contract_, uint256 tokenId, bool value) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(address delegate) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(address vault) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(address vault, address contract_) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(address vault, address contract_, uint256 tokenId)
        external
        view
        returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(address vault)
        external
        view
        returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(address vault) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(address delegate, address vault) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(address delegate, address vault, address contract_)
        external
        view
        returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(address delegate, address vault, address contract_, uint256 tokenId)
        external
        view
        returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "./CreatorCore.sol";

/**
 * @dev Core ERC1155 creator interface
 */
interface IERC1155CreatorCore is ICreatorCore {

    /**
     * @dev mint a token with no extension. Can only be called by an admin.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintBaseNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintBaseNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);

    /**
     * @dev batch mint existing token with no extension. Can only be called by an admin.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintBaseExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintBaseExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev mint a token from an extension. Can only be called by a registered extension.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintExtensionNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintExtensionNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);

    /**
     * @dev batch mint existing token from extension. Can only be called by a registered extension.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintExtensionExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev burn tokens. Can only be called by token owner or approved address.
     * On burn, calls back to the registered extension's onBurn method
     */
    function burn(address account, uint256[] calldata tokenIds, uint256[] calldata amounts) external;

    /**
     * @dev Total amount of tokens in with a given tokenId.
     */
    function totalSupply(uint256 tokenId) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

import "./ILazyPayableClaim.sol";

/**
 * Lazy Claim interface
 */
interface IERC1155LazyPayableClaim is ILazyPayableClaim {

    struct ClaimParameters {
        uint32 totalMax;
        uint32 walletMax;
        uint48 startDate;
        uint48 endDate;
        StorageProtocol storageProtocol;
        bytes32 merkleRoot;
        string location;
        uint256 cost;
        address payable paymentReceiver;
        address erc20;
        address signingAddress;
    }

    struct Claim {
        uint32 total;
        uint32 totalMax;
        uint32 walletMax;
        uint48 startDate;
        uint48 endDate;
        StorageProtocol storageProtocol;
        bytes32 merkleRoot;
        string location;
        uint256 tokenId;
        uint256 cost;
        address payable paymentReceiver;
        address erc20;
        address signingAddress;
    }

    /**
     * @notice initialize a new claim, emit initialize event
     * @param creatorContractAddress    the creator contract the claim will mint tokens for
     * @param instanceId                the claim instanceId for the creator contract
     * @param claimParameters           the parameters which will affect the minting behavior of the claim
     */
    function initializeClaim(address creatorContractAddress, uint256 instanceId, ClaimParameters calldata claimParameters) external;

    /**
     * @notice update an existing claim at instanceId
     * @param creatorContractAddress    the creator contract corresponding to the claim
     * @param instanceId                the claim instanceId for the creator contract
     * @param claimParameters           the parameters which will affect the minting behavior of the claim
     */
    function updateClaim(address creatorContractAddress, uint256 instanceId, ClaimParameters calldata claimParameters) external;

    /**
     * @notice update tokenURI parameters for an existing claim at instanceId
     * @param creatorContractAddress    the creator contract corresponding to the claim
     * @param instanceId                the claim instanceId for the creator contract
     * @param storageProtocol           the new storage protocol
     * @param location                  the new location
     */
    function updateTokenURIParams(address creatorContractAddress, uint256 instanceId, StorageProtocol storageProtocol, string calldata location) external;

    /**
     * @notice extend tokenURI parameters for an existing claim at instanceId.  Must have NONE StorageProtocol
     * @param creatorContractAddress    the creator contract corresponding to the claim
     * @param instanceId                the claim instanceId for the creator contract
     * @param locationChunk             the additional location chunk
     */
    function extendTokenURI(address creatorContractAddress, uint256 instanceId, string calldata locationChunk) external;

    /**
     * @notice get a claim corresponding to a creator contract and instanceId
     * @param creatorContractAddress    the address of the creator contract
     * @param instanceId                the claim instanceId for the creator contract
     * @return                          the claim object
     */
    function getClaim(address creatorContractAddress, uint256 instanceId) external view returns(Claim memory);

    /**
     * @notice get a claim corresponding to a token
     * @param creatorContractAddress    the address of the creator contract
     * @param tokenId                   the tokenId of the claim
     * @return                          the claim instanceId and claim object
     */
    function getClaimForToken(address creatorContractAddress, uint256 tokenId) external view returns(uint256, Claim memory);

    /**
     * @notice allow admin to airdrop arbitrary tokens 
     * @param creatorContractAddress    the creator contract the claim will mint tokens for
     * @param instanceId                the claim instanceId for the creator contract
     * @param recipients                addresses to airdrop to
     * @param amounts                   number of tokens to airdrop to each address in addresses
     */
    function airdrop(address creatorContractAddress, uint256 instanceId, address[] calldata recipients, uint256[] calldata amounts) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

/**
 * Lazy Payable Claim interface
 */
interface ILazyPayableClaim {
    enum StorageProtocol { INVALID, NONE, ARWEAVE, IPFS }
    
    event ClaimInitialized(address indexed creatorContract, uint256 indexed instanceId, address initializer);
    event ClaimUpdated(address indexed creatorContract, uint256 indexed instanceId);
    event ClaimMint(address indexed creatorContract, uint256 indexed instanceId);
    event ClaimMintBatch(address indexed creatorContract, uint256 indexed instanceId, uint16 mintCount);
    event ClaimMintProxy(address indexed creatorContract, uint256 indexed instanceId, uint16 mintCount, address proxy, address mintFor);
    event ClaimMintSignature(address indexed creatorContract, uint256 indexed instanceId, uint16 mintCount, address proxy, address mintFor, bytes32 nonce);

    /**
     * @notice Withdraw funds
     */
    function withdraw(address payable receiver, uint256 amount) external;

    /**
     * @notice Set the Manifold Membership address
     */
    function setMembershipAddress(address membershipAddress) external;

    /**
     * @notice check if a mint index has been consumed or not (only for merkle claims)
     *
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintIndex                 the mint claim instance
     * @return                          whether or not the mint index was consumed
     */
    function checkMintIndex(address creatorContractAddress, uint256 instanceId, uint32 mintIndex) external view returns(bool);

    /**
     * @notice check if multiple mint indices has been consumed or not (only for merkle claims)
     *
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintIndices               the mint claim instance
     * @return                          whether or not the mint index was consumed
     */
    function checkMintIndices(address creatorContractAddress, uint256 instanceId, uint32[] calldata mintIndices) external view returns(bool[] memory);

    /**
     * @notice get mints made for a wallet (only for non-merkle claims with walletMax)
     *
     * @param minter                    the address of the minting address
     * @param creatorContractAddress    the address of the creator contract for the claim
     * @param instanceId                the claim instance for the creator contract
     * @return                          how many mints the minter has made
     */
    function getTotalMints(address minter, address creatorContractAddress, uint256 instanceId) external view returns(uint32);

    /**
     * @notice allow a wallet to lazily claim a token according to parameters
     * @param creatorContractAddress    the creator contract address
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintIndex                 the mint index (only needed for merkle claims)
     * @param merkleProof               if the claim has a merkleRoot, verifying merkleProof ensures that address + minterValue was used to construct it  (only needed for merkle claims)
     * @param mintFor                   mintFor must be the msg.sender or a delegate wallet address (in the case of merkle based mints)
     */
    function mint(address creatorContractAddress, uint256 instanceId, uint32 mintIndex, bytes32[] calldata merkleProof, address mintFor) external payable;

    /**
     * @notice allow a wallet to lazily claim a token according to parameters
     * @param creatorContractAddress    the creator contract address
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintCount                 the number of claims to mint
     * @param mintIndices               the mint index (only needed for merkle claims)
     * @param merkleProofs              if the claim has a merkleRoot, verifying merkleProof ensures that address + minterValue was used to construct it  (only needed for merkle claims)
     * @param mintFor                   mintFor must be the msg.sender or a delegate wallet address (in the case of merkle based mints)
     */
    function mintBatch(address creatorContractAddress, uint256 instanceId, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) external payable;

    /**
     * @notice allow a proxy to mint a token for another address
     * @param creatorContractAddress    the creator contract address
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintCount                 the number of claims to mint
     * @param mintIndices               the mint index (only needed for merkle claims)
     * @param merkleProofs              if the claim has a merkleRoot, verifying merkleProof ensures that address + minterValue was used to construct it  (only needed for merkle claims)
     * @param mintFor                   the address to mint for
     */
    function mintProxy(address creatorContractAddress, uint256 instanceId, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) external payable;

    /**
     * @notice allowlist minting based on signatures
     * @param creatorContractAddress    the creator contract address
     * @param instanceId                the claim instanceId for the creator contract
     * @param mintCount                 the number of claims to mint
     * @param signature                 if the claim has a signerAddress, verifying signatures were signed by it
     * @param message                   the message that was signed
     * @param nonce                     the nonce that was signed
     * @param mintFor                   the address to mint for
     */
    function mintSignature(address creatorContractAddress, uint256 instanceId, uint16 mintCount, bytes calldata signature, bytes32 message, bytes32 nonce, address mintFor, uint256 expiration) external payable;

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @author: manifold.xyz

/**
 * Manifold Membership interface
 */
interface IManifoldMembership {
   function isActiveMember(address sender) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// solhint-disable reason-string
pragma solidity ^0.8.0;

import "@manifoldxyz/libraries-solidity/contracts/access/AdminControl.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import ".././libraries/delegation-registry/IDelegationRegistry.sol";
import ".././libraries/manifold-membership/IManifoldMembership.sol";

import "./ILazyPayableClaim.sol";

error InvalidInput();
error ClaimInactive();
error TooManyRequested();
error MustUseSignatureMinting();
error FailedToTransfer();
error InvalidSignature();
error ExpiredSignature();

/**
 * @title Lazy Payable Claim
 * @author manifold.xyz
 * @notice Lazy payable claim with optional whitelist ERC721 tokens
 */
abstract contract LazyPayableClaim is ILazyPayableClaim, AdminControl {
    using EnumerableSet for EnumerableSet.AddressSet;
    using ECDSA for bytes32;

    string internal constant ARWEAVE_PREFIX = "https://arweave.net/";
    string internal constant IPFS_PREFIX = "ipfs://";

    uint256 internal constant MINT_INDEX_BITMASK = 0xFF;
    // solhint-disable-next-line
    address public immutable DELEGATION_REGISTRY;

    uint256 public constant MINT_FEE = 500000000000000;
    uint256 public constant MINT_FEE_MERKLE = 690000000000000;
    address public MEMBERSHIP_ADDRESS;

    uint256 internal constant MAX_UINT_24 = 0xffffff;
    uint256 internal constant MAX_UINT_32 = 0xffffffff;
    uint256 internal constant MAX_UINT_56 = 0xffffffffffffff;
    uint256 internal constant MAX_UINT_256 = 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    address private constant ADDRESS_ZERO = 0x0000000000000000000000000000000000000000;

    // ONLY USED FOR NON-MERKLE MINTS: stores the number of tokens minted per wallet per claim, in order to limit maximum
    // { contractAddress => { instanceId => { walletAddress => walletMints } } }
    mapping(address => mapping(uint256 => mapping(address => uint256))) internal _mintsPerWallet;

    // ONLY USED FOR MERKLE MINTS: stores mapping from claim to indices minted
    // { contractAddress => {instanceId => { instanceIdOffset => index } } }
    mapping(address => mapping(uint256 => mapping(uint256 => uint256))) internal _claimMintIndices;

    // { creatorContractAddress => { instanceId => nonce => t/f  } }
    mapping(address => mapping(uint256 => mapping(bytes32 => bool))) internal _usedMessages;

    /**
     * @notice This extension is shared, not single-creator. So we must ensure
     * that a claim's initializer is an admin on the creator contract
     * @param creatorContractAddress    the address of the creator contract to check the admin against
     */
    modifier creatorAdminRequired(address creatorContractAddress) {
        AdminControl creatorCoreContract = AdminControl(creatorContractAddress);
        require(creatorCoreContract.isAdmin(msg.sender), "Wallet is not an administrator for contract");
        _;
    }

    constructor(address initialOwner, address delegationRegistry) {
        _transferOwnership(initialOwner);
        DELEGATION_REGISTRY = delegationRegistry;
    }

    /**
     * See {ILazyPayableClaim-withdraw}.
     */
    function withdraw(address payable receiver, uint256 amount) external override adminRequired {
        (bool sent, ) = receiver.call{value: amount}("");
        if (!sent) revert FailedToTransfer();
    }

    /**
     * See {ILazyPayableClaim-setMembershipAddress}.
     */
    function setMembershipAddress(address membershipAddress) external override adminRequired {
        MEMBERSHIP_ADDRESS = membershipAddress;
    }

    function _transferFunds(address erc20, uint256 cost, address payable recipient, uint16 mintCount, bool merkle, bool allowMembership) internal {
        uint256 payableCost;
        if (erc20 != ADDRESS_ZERO) {
            require(IERC20(erc20).transferFrom(msg.sender, recipient, cost*mintCount), "Insufficient funds");
        } else {
            payableCost = cost;
        }

        /**
         * Add mint fee if:
         * 1. Not allowing memberships OR
         * 2. No membership address set OR
         * 3. Not an active member
        */
        if (MEMBERSHIP_ADDRESS == ADDRESS_ZERO || !allowMembership || !IManifoldMembership(MEMBERSHIP_ADDRESS).isActiveMember(msg.sender)) {
            payableCost += merkle ? MINT_FEE_MERKLE : MINT_FEE; 
        }
        if (mintCount > 1) {
            payableCost *= mintCount;
            cost *= mintCount;
        }

        // Check price
        require(msg.value >= payableCost, "Invalid amount");
        if (erc20 == ADDRESS_ZERO && cost != 0) {
            // solhint-disable-next-line
            (bool sent, ) = recipient.call{value: cost}("");
            if (!sent) revert FailedToTransfer();
        }
    }

    function _checkMintIndex(address creatorContractAddress, uint256 instanceId, bytes32 merkleRoot, uint32 mintIndex) internal view returns (bool) {
        uint256 claimMintIndex = mintIndex >> 8;
        require(merkleRoot != "", "Can only check merkle claims");
        uint256 claimMintTracking = _claimMintIndices[creatorContractAddress][instanceId][claimMintIndex];
        uint256 mintBitmask = 1 << (mintIndex & MINT_INDEX_BITMASK);
        return mintBitmask & claimMintTracking != 0;
    }

    function _validateMint(address creatorContractAddress, uint256 instanceId, uint48 startDate, uint48 endDate, uint32 walletMax, bytes32 merkleRoot, uint32 mintIndex, bytes32[] calldata merkleProof, address mintFor) internal {
        // Check timestamps
        if ((startDate > block.timestamp) || (endDate > 0 && endDate < block.timestamp)) revert ClaimInactive();
        
        if (merkleRoot != "") {
            // Merkle mint
            _checkMerkleAndUpdate(msg.sender, creatorContractAddress, instanceId, merkleRoot, mintIndex, merkleProof, mintFor);
        } else {
            if (mintFor != msg.sender) revert InvalidInput();
            // Non-merkle mint
            if (walletMax != 0) {
                if (++_mintsPerWallet[creatorContractAddress][instanceId][msg.sender] > walletMax) revert TooManyRequested();
            }
        }
    }

    function _validateMint(address creatorContractAddress, uint256 instanceId, uint48 startDate, uint48 endDate, uint32 walletMax, bytes32 merkleRoot, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) internal {
        // Check timestamps
        if ((startDate > block.timestamp) || (endDate > 0 && endDate < block.timestamp)) revert ClaimInactive();
        
        if (merkleRoot != "") {
            if (!(mintCount == mintIndices.length && mintCount == merkleProofs.length)) revert InvalidInput();
            // Merkle mint
            for (uint256 i; i < mintCount;) {
                _checkMerkleAndUpdate(msg.sender, creatorContractAddress, instanceId, merkleRoot, mintIndices[i], merkleProofs[i], mintFor);
                unchecked { ++i; }
            }
        } else {
            if (mintFor != msg.sender) revert InvalidInput();
            // Non-merkle mint
            if (walletMax != 0) {
                _mintsPerWallet[creatorContractAddress][instanceId][mintFor] += mintCount;
                if (_mintsPerWallet[creatorContractAddress][instanceId][mintFor] > walletMax) revert TooManyRequested();
            }
        }
    }

    function _validateMintProxy(address creatorContractAddress, uint256 instanceId, uint48 startDate, uint48 endDate, uint32 walletMax, bytes32 merkleRoot, uint16 mintCount, uint32[] calldata mintIndices, bytes32[][] calldata merkleProofs, address mintFor) internal {
        // Check timestamps
        if ((startDate > block.timestamp) || (endDate > 0 && endDate < block.timestamp)) revert ClaimInactive();
        
        if (merkleRoot != "") {
            if (!(mintCount == mintIndices.length && mintCount == merkleProofs.length)) revert InvalidInput();
            // Merkle mint
            for (uint256 i; i < mintCount;) {
                // Proxy mints treat the mintFor as the transaction sender
                _checkMerkleAndUpdate(mintFor, creatorContractAddress, instanceId, merkleRoot, mintIndices[i], merkleProofs[i], mintFor);
                unchecked { ++i; }
            }
        } else {
            // Non-merkle mint
            if (walletMax != 0) {
                _mintsPerWallet[creatorContractAddress][instanceId][mintFor] += mintCount;
                if (_mintsPerWallet[creatorContractAddress][instanceId][mintFor] > walletMax) revert TooManyRequested();
            }
        }
    }

    function _validateMintSignature(uint48 startDate, uint48 endDate, bytes calldata signature, address signingAddress) internal view {
        if (signingAddress == address(0)) revert MustUseSignatureMinting();
        if (signature.length <= 0) revert InvalidInput();
        // Check timestamps
        if ((startDate > block.timestamp) || (endDate > 0 && endDate < block.timestamp)) revert ClaimInactive();
    }

    function _checkMerkleAndUpdate(address sender, address creatorContractAddress, uint256 instanceId, bytes32 merkleRoot, uint32 mintIndex, bytes32[] memory merkleProof, address mintFor) private {
        // Merkle mint
        bytes32 leaf;
        if (mintFor == sender) {
            leaf = keccak256(abi.encodePacked(sender, mintIndex));
        } else {
            // Direct verification failed, try delegate verification
            IDelegationRegistry dr = IDelegationRegistry(DELEGATION_REGISTRY);
            require(dr.checkDelegateForContract(sender, mintFor, address(this)), "Invalid delegate");
            leaf = keccak256(abi.encodePacked(mintFor, mintIndex));
        }
        require(MerkleProof.verify(merkleProof, merkleRoot, leaf), "Could not verify merkle proof");

        // Check if mintIndex has been minted
        uint256 claimMintIndex = mintIndex >> 8;
        uint256 claimMintTracking = _claimMintIndices[creatorContractAddress][instanceId][claimMintIndex];
        uint256 mintBitmask = 1 << (mintIndex & MINT_INDEX_BITMASK);
        require(mintBitmask & claimMintTracking == 0, "Already minted");
        _claimMintIndices[creatorContractAddress][instanceId][claimMintIndex] = claimMintTracking | mintBitmask;
    }

    function _checkSignatureAndUpdate(address creatorContractAddress, uint256 instanceId, bytes calldata signature, bytes32 message, bytes32 nonce, address signingAddress, address mintFor, uint256 expiration, uint16 mintCount) internal {
        // Verify valid message based on input variables
        bytes32 expectedMessage = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", creatorContractAddress, instanceId, nonce, mintFor, expiration, mintCount));
        // Verify nonce usage/re-use
        require(!_usedMessages[creatorContractAddress][instanceId][nonce], "Cannot replay transaction");
        address signer = message.recover(signature);
        if (message != expectedMessage || signer != signingAddress) revert InvalidSignature();
        if (block.timestamp > expiration)  revert ExpiredSignature();
        _usedMessages[creatorContractAddress][instanceId][nonce] = true;
    }

    function _getTotalMints(uint32 walletMax, address minter, address creatorContractAddress, uint256 instanceId) internal view returns(uint32) {
        require(walletMax != 0, "Can only retrieve for non-merkle claims with walletMax");
        return uint32(_mintsPerWallet[creatorContractAddress][instanceId][minter]);
    }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.2) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proofLen - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            require(proofPos == proofLen, "MerkleProof: invalid multiproof");
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proofLen - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            require(proofPos == proofLen, "MerkleProof: invalid multiproof");
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

{
  "compilationTarget": {
    "contracts/lazyclaim/ERC1155LazyPayableClaim.sol": "ERC1155LazyPayableClaim"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": [
    ":@ensdomains/=node_modules/@ensdomains/",
    ":@manifoldxyz/=node_modules/@manifoldxyz/",
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":create2-helpers/=lib/create2-helpers/src/",
    ":create2-scripts/=lib/create2-helpers/script/",
    ":eth-gas-reporter/=node_modules/eth-gas-reporter/",
    ":forge-std/=lib/forge-std/src/",
    ":hardhat/=node_modules/hardhat/",
    ":murky/=lib/murky/src/",
    ":operator-filter-registry/=node_modules/operator-filter-registry/",
    ":truffle/=node_modules/truffle/",
    "lib/murky:forge-std/=lib/murky/lib/forge-std/src/",
    "lib/murky:openzeppelin-contracts/=lib/murky/lib/openzeppelin-contracts/",
    "lib/operator-filter-registry:openzeppelin-contracts-upgradeable/=lib/operator-filter-registry/lib/openzeppelin-contracts-upgradeable/contracts/",
    "lib/operator-filter-registry:openzeppelin-contracts/=lib/operator-filter-registry/lib/openzeppelin-contracts/contracts/"
  ]
}