// File: contracts/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.2;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: contracts/Context.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.2;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: contracts/Ownable.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.2;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: contracts/Address.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: contracts/IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.2;


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: contracts/IBrainLootbox.sol

pragma solidity 0.6.2;

interface IBrainLootbox {
  function getPrice(uint256 _id) external view returns (uint256);
  function redeem(uint256 id, address to) external;
}

// File: contracts/LockedLPFarm.sol

pragma solidity 0.6.2;





library SafeMathInt {
  function mul(int256 a, int256 b) internal pure returns (int256) {
  // Prevent overflow when multiplying INT256_MIN with -1
  // https://github.com/RequestNetwork/requestNetwork/issues/43
  require(!(a == - 2**255 && b == -1) && !(b == - 2**255 && a == -1));

  int256 c = a * b;
  require((b == 0) || (c / b == a));
  return c;
}

  function div(int256 a, int256 b) internal pure returns (int256) {
    // Prevent overflow when dividing INT256_MIN by -1
    // https://github.com/RequestNetwork/requestNetwork/issues/43
    require(!(a == - 2**255 && b == -1) && (b > 0));

    return a / b;
  }

  function sub(int256 a, int256 b) internal pure returns (int256) {
    require((b >= 0 && a - b <= a) || (b < 0 && a - b > a));

    return a - b;
  }

  function add(int256 a, int256 b) internal pure returns (int256) {
    int256 c = a + b;
    require((b >= 0 && c >= a) || (b < 0 && c < a));
    return c;
  }

  function toUint256Safe(int256 a) internal pure returns (uint256) {
    require(a >= 0);
    return uint256(a);
  }
}

library SafeMathUint {
  function toInt256Safe(uint256 a) internal pure returns (int256) {
    int256 b = int256(a);
    require(b >= 0);
    return b;
  }
}

interface IFeeDistributor {
  function processTransfer() external;
  function pendingFarmAmount() external view returns (uint256);
}

contract LockedLPFarm is Ownable {
  using SafeMath for uint256;
  using SafeMathUint for uint256;
  using SafeMathInt for int256;
  
  address public LPAddress;
  address public DistributorAddress;
  address public BrainAddress;
  address public LootboxAddress;

  constructor(address _brain, address _lp) public {
    LPAddress = _lp;
    BrainAddress = _brain;
  }

  function setLootboxAddress(address _address) public onlyOwner {
    LootboxAddress = _address;
  }

  function setDistributorAddress(address _address) public onlyOwner {
    DistributorAddress = _address;
  }

	mapping(address => uint256) private lpBalance;
	mapping(address => uint256) public lastUpdateTime;
	mapping(address => uint256) public points;

		uint256 public totalStaked;

	event Staked(address indexed user, uint256 amount);
	event Withdrawn(address indexed user, uint256 amount);

	modifier updateReward(address account) {
		if (account != address(0)) {
			points[account] = earned(account);
			lastUpdateTime[account] = block.timestamp;
      		}
		_;
	}

  function balanceOf(address account) public view returns (uint256) {
    return lpBalance[account];
  }


  function earned(address account) public view returns (uint256) {
    uint256 blockTime = block.timestamp;
    return points[account].add(blockTime.sub(lastUpdateTime[account]).mul(1e18).div(86400).mul(balanceOf(account).div(1e18)));
  }

	function stake(uint256 amount) public updateReward(_msgSender()) {
	  require(amount.add(balanceOf(_msgSender())) <= 5000000000000000000, "Cannot stake more than 5 Locked LP");
	  distributeDividends();
	  IERC20(LPAddress).transferFrom(_msgSender(), address(this), amount);
	  totalStaked = totalStaked.add(amount);
    magnifiedDividendCorrections[_msgSender()] = magnifiedDividendCorrections[_msgSender()].sub((magnifiedDividendPerShare.mul(amount)).toInt256Safe());
	  lpBalance[_msgSender()] = lpBalance[_msgSender()].add(amount);
		emit Staked(_msgSender(), amount);
	}

	function withdraw(uint256 amount) public updateReward(_msgSender()) {
		require(amount > 0, "Cannot withdraw 0");
		require(amount <= balanceOf(_msgSender()), "Cannot withdraw more than balance");
		distributeDividends();
		IERC20(LPAddress).transfer(_msgSender(), amount);
		totalStaked = totalStaked.sub(amount);
    magnifiedDividendCorrections[_msgSender()] = magnifiedDividendCorrections[_msgSender()].add((magnifiedDividendPerShare.mul(amount)).toInt256Safe());
		lpBalance[_msgSender()] = lpBalance[_msgSender()].sub(amount);
		emit Withdrawn(_msgSender(), amount);
	}

	function exit() external {
		withdraw(balanceOf(_msgSender()));
	}
    
	function redeem(uint256 _lootbox) public updateReward(_msgSender()) {
    uint256 price = IBrainLootbox(LootboxAddress).getPrice(_lootbox);
    require(price > 0, "Loot not found");
    require(points[_msgSender()] >= price, "Not enough points to redeem");
    IBrainLootbox(LootboxAddress).redeem(_lootbox, _msgSender());
    points[_msgSender()] = points[_msgSender()].sub(price);
	}
	
	// $BRAIN Dividends
	// Based off https://github.com/Roger-Wu/erc1726-dividend-paying-token
	event DividendsDistributed(uint256 amount);
	event DividendWithdrawn(address to, uint256 amount);
	
	uint256 private lastBrainBalance;

  uint256 constant public magnitude = 2**128;
  uint256 public magnifiedDividendPerShare;
  mapping(address => int256) public magnifiedDividendCorrections;
  mapping(address => uint256) public withdrawnDividends;

  function distributeDividends() public {
    if (totalStaked > 0) {
      IFeeDistributor(DistributorAddress).processTransfer();
      uint256 currentBalance = IERC20(BrainAddress).balanceOf(address(this));
      if (currentBalance > lastBrainBalance) {
        uint256 value = currentBalance.sub(lastBrainBalance);
        magnifiedDividendPerShare = magnifiedDividendPerShare.add((value.mul(magnitude)).div(totalStaked));
        lastBrainBalance = currentBalance;
        emit DividendsDistributed(value);
      }
    }
  }

  function withdrawDividend() public {
    distributeDividends();
    uint256 _withdrawableDividend = withdrawableDividendOf(_msgSender());
    if (_withdrawableDividend > 0) {
      withdrawnDividends[_msgSender()] = withdrawnDividends[_msgSender()].add(_withdrawableDividend);
      emit DividendWithdrawn(_msgSender(), _withdrawableDividend);
      IERC20(BrainAddress).transfer(_msgSender(), _withdrawableDividend);
      lastBrainBalance = lastBrainBalance.sub(_withdrawableDividend);
    }
  }

  function dividendOf(address _owner) public view returns(uint256) {
    return withdrawableDividendOf(_owner);
  }

  function PendingWithdrawableDividendOf(address _owner) public view returns (uint256) {
    uint256 value = IFeeDistributor(DistributorAddress).pendingFarmAmount();
    if (value > 0) {
      uint256 magnified = magnifiedDividendPerShare.add((value.mul(magnitude)).div(totalStaked));
      uint256 accum = magnified.mul(balanceOf(_owner)).toInt256Safe().add(magnifiedDividendCorrections[_owner]).toUint256Safe() / magnitude;
      return accum.sub(withdrawnDividends[_owner]);
    } else {
      return withdrawableDividendOf(_owner);
    }
  }

  function withdrawableDividendOf(address _owner) public view returns(uint256) {
    return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
  }

  function withdrawnDividendOf(address _owner) public view returns(uint256) {
    return withdrawnDividends[_owner];
  }

  function accumulativeDividendOf(address _owner) public view returns(uint256) {
    return magnifiedDividendPerShare.mul(balanceOf(_owner)).toInt256Safe()
      .add(magnifiedDividendCorrections[_owner]).toUint256Safe() / magnitude;
  }
    
}

{
  "compilationTarget": {
    "LockedLPFarm.sol": "LockedLPFarm"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}