// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/Governor.sol)

pragma solidity ^0.8.0;

import "../utils/cryptography/ECDSA.sol";
import "../utils/cryptography/draft-EIP712.sol";
import "../utils/introspection/ERC165.sol";
import "../utils/math/SafeCast.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";
import "../utils/Timers.sol";
import "./IGovernor.sol";

/**
 * @dev Core of the governance system, designed to be extended though various modules.
 *
 * This contract is abstract and requires several function to be implemented in various modules:
 *
 * - A counting module must implement {quorum}, {_quorumReached}, {_voteSucceeded} and {_countVote}
 * - A voting module must implement {getVotes}
 * - Additionanly, the {votingPeriod} must also be implemented
 *
 * _Available since v4.3._
 */
abstract contract Governor is Context, ERC165, EIP712, IGovernor {
    using SafeCast for uint256;
    using Timers for Timers.BlockNumber;

    bytes32 public constant BALLOT_TYPEHASH = keccak256("Ballot(uint256 proposalId,uint8 support)");

    struct ProposalCore {
        Timers.BlockNumber voteStart;
        Timers.BlockNumber voteEnd;
        bool executed;
        bool canceled;
    }

    string private _name;

    mapping(uint256 => ProposalCore) private _proposals;

    /**
     * @dev Restrict access of functions to the governance executor, which may be the Governor itself or a timelock
     * contract, as specified by {_executor}. This generally means that function with this modifier must be voted on and
     * executed through the governance protocol.
     */
    modifier onlyGovernance() {
        require(_msgSender() == _executor(), "Governor: onlyGovernance");
        _;
    }

    /**
     * @dev Sets the value for {name} and {version}
     */
    constructor(string memory name_) EIP712(name_, version()) {
        _name = name_;
    }

    /**
     * @dev Function to receive ETH that will be handled by the governor (disabled if executor is a third party contract)
     */
    receive() external payable virtual {
        require(_executor() == address(this));
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return interfaceId == type(IGovernor).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IGovernor-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IGovernor-version}.
     */
    function version() public view virtual override returns (string memory) {
        return "1";
    }

    /**
     * @dev See {IGovernor-hashProposal}.
     *
     * The proposal id is produced by hashing the RLC encoded `targets` array, the `values` array, the `calldatas` array
     * and the descriptionHash (bytes32 which itself is the keccak256 hash of the description string). This proposal id
     * can be produced from the proposal data which is part of the {ProposalCreated} event. It can even be computed in
     * advance, before the proposal is submitted.
     *
     * Note that the chainId and the governor address are not part of the proposal id computation. Consequently, the
     * same proposal (with same operation and same description) will have the same id if submitted on multiple governors
     * accross multiple networks. This also means that in order to execute the same operation twice (on the same
     * governor) the proposer will have to change the description in order to avoid proposal id conflicts.
     */
    function hashProposal(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public pure virtual override returns (uint256) {
        return uint256(keccak256(abi.encode(targets, values, calldatas, descriptionHash)));
    }

    /**
     * @dev See {IGovernor-state}.
     */
    function state(uint256 proposalId) public view virtual override returns (ProposalState) {
        ProposalCore storage proposal = _proposals[proposalId];

        if (proposal.executed) {
            return ProposalState.Executed;
        }

        if (proposal.canceled) {
            return ProposalState.Canceled;
        }

        uint256 snapshot = proposalSnapshot(proposalId);

        if (snapshot == 0) {
            revert("Governor: unknown proposal id");
        }

        if (snapshot >= block.number) {
            return ProposalState.Pending;
        }

        uint256 deadline = proposalDeadline(proposalId);

        if (deadline >= block.number) {
            return ProposalState.Active;
        }

        if (_quorumReached(proposalId) && _voteSucceeded(proposalId)) {
            return ProposalState.Succeeded;
        } else {
            return ProposalState.Defeated;
        }
    }

    /**
     * @dev See {IGovernor-proposalSnapshot}.
     */
    function proposalSnapshot(uint256 proposalId) public view virtual override returns (uint256) {
        return _proposals[proposalId].voteStart.getDeadline();
    }

    /**
     * @dev See {IGovernor-proposalDeadline}.
     */
    function proposalDeadline(uint256 proposalId) public view virtual override returns (uint256) {
        return _proposals[proposalId].voteEnd.getDeadline();
    }

    /**
     * @dev Part of the Governor Bravo's interface: _"The number of votes required in order for a voter to become a proposer"_.
     */
    function proposalThreshold() public view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Amount of votes already cast passes the threshold limit.
     */
    function _quorumReached(uint256 proposalId) internal view virtual returns (bool);

    /**
     * @dev Is the proposal successful or not.
     */
    function _voteSucceeded(uint256 proposalId) internal view virtual returns (bool);

    /**
     * @dev Register a vote with a given support and voting weight.
     *
     * Note: Support is generic and can represent various things depending on the voting system used.
     */
    function _countVote(
        uint256 proposalId,
        address account,
        uint8 support,
        uint256 weight
    ) internal virtual;

    /**
     * @dev See {IGovernor-propose}.
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) public virtual override returns (uint256) {
        require(
            getVotes(msg.sender, block.number - 1) >= proposalThreshold(),
            "GovernorCompatibilityBravo: proposer votes below proposal threshold"
        );

        uint256 proposalId = hashProposal(targets, values, calldatas, keccak256(bytes(description)));

        require(targets.length == values.length, "Governor: invalid proposal length");
        require(targets.length == calldatas.length, "Governor: invalid proposal length");
        require(targets.length > 0, "Governor: empty proposal");

        ProposalCore storage proposal = _proposals[proposalId];
        require(proposal.voteStart.isUnset(), "Governor: proposal already exists");

        uint64 snapshot = block.number.toUint64() + votingDelay().toUint64();
        uint64 deadline = snapshot + votingPeriod().toUint64();

        proposal.voteStart.setDeadline(snapshot);
        proposal.voteEnd.setDeadline(deadline);

        emit ProposalCreated(
            proposalId,
            _msgSender(),
            targets,
            values,
            new string[](targets.length),
            calldatas,
            snapshot,
            deadline,
            description
        );

        return proposalId;
    }

    /**
     * @dev See {IGovernor-execute}.
     */
    function execute(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public payable virtual override returns (uint256) {
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);

        ProposalState status = state(proposalId);
        require(
            status == ProposalState.Succeeded || status == ProposalState.Queued,
            "Governor: proposal not successful"
        );
        _proposals[proposalId].executed = true;

        emit ProposalExecuted(proposalId);

        _execute(proposalId, targets, values, calldatas, descriptionHash);

        return proposalId;
    }

    /**
     * @dev Internal execution mechanism. Can be overriden to implement different execution mechanism
     */
    function _execute(
        uint256, /* proposalId */
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 /*descriptionHash*/
    ) internal virtual {
        string memory errorMessage = "Governor: call reverted without message";
        for (uint256 i = 0; i < targets.length; ++i) {
            (bool success, bytes memory returndata) = targets[i].call{value: values[i]}(calldatas[i]);
            Address.verifyCallResult(success, returndata, errorMessage);
        }
    }

    /**
     * @dev Internal cancel mechanism: locks up the proposal timer, preventing it from being re-submitted. Marks it as
     * canceled to allow distinguishing it from executed proposals.
     *
     * Emits a {IGovernor-ProposalCanceled} event.
     */
    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual returns (uint256) {
        uint256 proposalId = hashProposal(targets, values, calldatas, descriptionHash);
        ProposalState status = state(proposalId);

        require(
            status != ProposalState.Canceled && status != ProposalState.Expired && status != ProposalState.Executed,
            "Governor: proposal not active"
        );
        _proposals[proposalId].canceled = true;

        emit ProposalCanceled(proposalId);

        return proposalId;
    }

    /**
     * @dev See {IGovernor-castVote}.
     */
    function castVote(uint256 proposalId, uint8 support) public virtual override returns (uint256) {
        address voter = _msgSender();
        return _castVote(proposalId, voter, support, "");
    }

    /**
     * @dev See {IGovernor-castVoteWithReason}.
     */
    function castVoteWithReason(
        uint256 proposalId,
        uint8 support,
        string calldata reason
    ) public virtual override returns (uint256) {
        address voter = _msgSender();
        return _castVote(proposalId, voter, support, reason);
    }

    /**
     * @dev See {IGovernor-castVoteBySig}.
     */
    function castVoteBySig(
        uint256 proposalId,
        uint8 support,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override returns (uint256) {
        address voter = ECDSA.recover(
            _hashTypedDataV4(keccak256(abi.encode(BALLOT_TYPEHASH, proposalId, support))),
            v,
            r,
            s
        );
        return _castVote(proposalId, voter, support, "");
    }

    /**
     * @dev Internal vote casting mechanism: Check that the vote is pending, that it has not been cast yet, retrieve
     * voting weight using {IGovernor-getVotes} and call the {_countVote} internal function.
     *
     * Emits a {IGovernor-VoteCast} event.
     */
    function _castVote(
        uint256 proposalId,
        address account,
        uint8 support,
        string memory reason
    ) internal virtual returns (uint256) {
        ProposalCore storage proposal = _proposals[proposalId];
        require(state(proposalId) == ProposalState.Active, "Governor: vote not currently active");

        uint256 weight = getVotes(account, proposal.voteStart.getDeadline());
        _countVote(proposalId, account, support, weight);

        emit VoteCast(account, proposalId, support, weight, reason);

        return weight;
    }

    /**
     * @dev Relays a transaction or function call to an arbitrary target. In cases where the governance executor
     * is some contract other than the governor itself, like when using a timelock, this function can be invoked
     * in a governance proposal to recover tokens or Ether that was sent to the governor contract by mistake.
     * Note that if the executor is simply the governor itself, use of `relay` is redundant.
     */
    function relay(
        address target,
        uint256 value,
        bytes calldata data
    ) external virtual onlyGovernance {
        Address.functionCallWithValue(target, data, value);
    }

    /**
     * @dev Address through which the governor executes action. Will be overloaded by module that execute actions
     * through another contract such as a timelock.
     */
    function _executor() internal view virtual returns (address) {
        return address(this);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (governance/extensions/GovernorCountingSimple.sol)

pragma solidity ^0.8.0;

import "../Governor.sol";

/**
 * @dev Extension of {Governor} for simple, 3 options, vote counting.
 *
 * _Available since v4.3._
 */
abstract contract GovernorCountingSimple is Governor {
    /**
     * @dev Supported vote types. Matches Governor Bravo ordering.
     */
    enum VoteType {
        Against,
        For,
        Abstain
    }

    struct ProposalVote {
        uint256 againstVotes;
        uint256 forVotes;
        uint256 abstainVotes;
        mapping(address => bool) hasVoted;
    }

    mapping(uint256 => ProposalVote) private _proposalVotes;

    /**
     * @dev See {IGovernor-COUNTING_MODE}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function COUNTING_MODE() public pure virtual override returns (string memory) {
        return "support=bravo&quorum=for,abstain";
    }

    /**
     * @dev See {IGovernor-hasVoted}.
     */
    function hasVoted(uint256 proposalId, address account) public view virtual override returns (bool) {
        return _proposalVotes[proposalId].hasVoted[account];
    }

    /**
     * @dev Accessor to the internal vote counts.
     */
    function proposalVotes(uint256 proposalId)
        public
        view
        virtual
        returns (
            uint256 againstVotes,
            uint256 forVotes,
            uint256 abstainVotes
        )
    {
        ProposalVote storage proposalvote = _proposalVotes[proposalId];
        return (proposalvote.againstVotes, proposalvote.forVotes, proposalvote.abstainVotes);
    }

    /**
     * @dev See {Governor-_quorumReached}.
     */
    function _quorumReached(uint256 proposalId) internal view virtual override returns (bool) {
        ProposalVote storage proposalvote = _proposalVotes[proposalId];

        return quorum(proposalSnapshot(proposalId)) <= proposalvote.forVotes + proposalvote.abstainVotes;
    }

    /**
     * @dev See {Governor-_voteSucceeded}. In this module, the forVotes must be strictly over the againstVotes.
     */
    function _voteSucceeded(uint256 proposalId) internal view virtual override returns (bool) {
        ProposalVote storage proposalvote = _proposalVotes[proposalId];

        return proposalvote.forVotes > proposalvote.againstVotes;
    }

    /**
     * @dev See {Governor-_countVote}. In this module, the support follows the `VoteType` enum (from Governor Bravo).
     */
    function _countVote(
        uint256 proposalId,
        address account,
        uint8 support,
        uint256 weight
    ) internal virtual override {
        ProposalVote storage proposalvote = _proposalVotes[proposalId];

        require(!proposalvote.hasVoted[account], "GovernorVotingSimple: vote already cast");
        proposalvote.hasVoted[account] = true;

        if (support == uint8(VoteType.Against)) {
            proposalvote.againstVotes += weight;
        } else if (support == uint8(VoteType.For)) {
            proposalvote.forVotes += weight;
        } else if (support == uint8(VoteType.Abstain)) {
            proposalvote.abstainVotes += weight;
        } else {
            revert("GovernorVotingSimple: invalid value for enum VoteType");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (governance/extensions/GovernorSettings.sol)

pragma solidity ^0.8.0;

import "../Governor.sol";

/**
 * @dev Extension of {Governor} for settings updatable through governance.
 *
 * _Available since v4.4._
 */
abstract contract GovernorSettings is Governor {
    uint256 private _votingDelay;
    uint256 private _votingPeriod;
    uint256 private _proposalThreshold;

    event VotingDelaySet(uint256 oldVotingDelay, uint256 newVotingDelay);
    event VotingPeriodSet(uint256 oldVotingPeriod, uint256 newVotingPeriod);
    event ProposalThresholdSet(uint256 oldProposalThreshold, uint256 newProposalThreshold);

    /**
     * @dev Initialize the governance parameters.
     */
    constructor(
        uint256 initialVotingDelay,
        uint256 initialVotingPeriod,
        uint256 initialProposalThreshold
    ) {
        _setVotingDelay(initialVotingDelay);
        _setVotingPeriod(initialVotingPeriod);
        _setProposalThreshold(initialProposalThreshold);
    }

    /**
     * @dev See {IGovernor-votingDelay}.
     */
    function votingDelay() public view virtual override returns (uint256) {
        return _votingDelay;
    }

    /**
     * @dev See {IGovernor-votingPeriod}.
     */
    function votingPeriod() public view virtual override returns (uint256) {
        return _votingPeriod;
    }

    /**
     * @dev See {Governor-proposalThreshold}.
     */
    function proposalThreshold() public view virtual override returns (uint256) {
        return _proposalThreshold;
    }

    /**
     * @dev Update the voting delay. This operation can only be performed through a governance proposal.
     *
     * Emits a {VotingDelaySet} event.
     */
    function setVotingDelay(uint256 newVotingDelay) public virtual onlyGovernance {
        _setVotingDelay(newVotingDelay);
    }

    /**
     * @dev Update the voting period. This operation can only be performed through a governance proposal.
     *
     * Emits a {VotingPeriodSet} event.
     */
    function setVotingPeriod(uint256 newVotingPeriod) public virtual onlyGovernance {
        _setVotingPeriod(newVotingPeriod);
    }

    /**
     * @dev Update the proposal threshold. This operation can only be performed through a governance proposal.
     *
     * Emits a {ProposalThresholdSet} event.
     */
    function setProposalThreshold(uint256 newProposalThreshold) public virtual onlyGovernance {
        _setProposalThreshold(newProposalThreshold);
    }

    /**
     * @dev Internal setter for the voting delay.
     *
     * Emits a {VotingDelaySet} event.
     */
    function _setVotingDelay(uint256 newVotingDelay) internal virtual {
        emit VotingDelaySet(_votingDelay, newVotingDelay);
        _votingDelay = newVotingDelay;
    }

    /**
     * @dev Internal setter for the voting period.
     *
     * Emits a {VotingPeriodSet} event.
     */
    function _setVotingPeriod(uint256 newVotingPeriod) internal virtual {
        // voting period must be at least one block long
        require(newVotingPeriod > 0, "GovernorSettings: voting period too low");
        emit VotingPeriodSet(_votingPeriod, newVotingPeriod);
        _votingPeriod = newVotingPeriod;
    }

    /**
     * @dev Internal setter for the proposal threshold.
     *
     * Emits a {ProposalThresholdSet} event.
     */
    function _setProposalThreshold(uint256 newProposalThreshold) internal virtual {
        emit ProposalThresholdSet(_proposalThreshold, newProposalThreshold);
        _proposalThreshold = newProposalThreshold;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/extensions/GovernorVotes.sol)

pragma solidity ^0.8.0;

import "../Governor.sol";
import "../utils/IVotes.sol";

/**
 * @dev Extension of {Governor} for voting weight extraction from an {ERC20Votes} token, or since v4.5 an {ERC721Votes} token.
 *
 * _Available since v4.3._
 */
abstract contract GovernorVotes is Governor {
    IVotes public immutable token;

    constructor(IVotes tokenAddress) {
        token = tokenAddress;
    }

    /**
     * Read the voting weight from the token's built in snapshot mechanism (see {IGovernor-getVotes}).
     */
    function getVotes(address account, uint256 blockNumber) public view virtual override returns (uint256) {
        return token.getPastVotes(account, blockNumber);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/extensions/GovernorVotesQuorumFraction.sol)

pragma solidity ^0.8.0;

import "./GovernorVotes.sol";

/**
 * @dev Extension of {Governor} for voting weight extraction from an {ERC20Votes} token and a quorum expressed as a
 * fraction of the total supply.
 *
 * _Available since v4.3._
 */
abstract contract GovernorVotesQuorumFraction is GovernorVotes {
    uint256 private _quorumNumerator;

    event QuorumNumeratorUpdated(uint256 oldQuorumNumerator, uint256 newQuorumNumerator);

    /**
     * @dev Initialize quorum as a fraction of the token's total supply.
     *
     * The fraction is specified as `numerator / denominator`. By default the denominator is 100, so quorum is
     * specified as a percent: a numerator of 10 corresponds to quorum being 10% of total supply. The denominator can be
     * customized by overriding {quorumDenominator}.
     */
    constructor(uint256 quorumNumeratorValue) {
        _updateQuorumNumerator(quorumNumeratorValue);
    }

    /**
     * @dev Returns the current quorum numerator. See {quorumDenominator}.
     */
    function quorumNumerator() public view virtual returns (uint256) {
        return _quorumNumerator;
    }

    /**
     * @dev Returns the quorum denominator. Defaults to 100, but may be overridden.
     */
    function quorumDenominator() public view virtual returns (uint256) {
        return 100;
    }

    /**
     * @dev Returns the quorum for a block number, in terms of number of votes: `supply * numerator / denominator`.
     */
    function quorum(uint256 blockNumber) public view virtual override returns (uint256) {
        return (token.getPastTotalSupply(blockNumber) * quorumNumerator()) / quorumDenominator();
    }

    /**
     * @dev Changes the quorum numerator.
     *
     * Emits a {QuorumNumeratorUpdated} event.
     *
     * Requirements:
     *
     * - Must be called through a governance proposal.
     * - New numerator must be smaller or equal to the denominator.
     */
    function updateQuorumNumerator(uint256 newQuorumNumerator) external virtual onlyGovernance {
        _updateQuorumNumerator(newQuorumNumerator);
    }

    /**
     * @dev Changes the quorum numerator.
     *
     * Emits a {QuorumNumeratorUpdated} event.
     *
     * Requirements:
     *
     * - New numerator must be smaller or equal to the denominator.
     */
    function _updateQuorumNumerator(uint256 newQuorumNumerator) internal virtual {
        require(
            newQuorumNumerator <= quorumDenominator(),
            "GovernorVotesQuorumFraction: quorumNumerator over quorumDenominator"
        );

        uint256 oldQuorumNumerator = _quorumNumerator;
        _quorumNumerator = newQuorumNumerator;

        emit QuorumNumeratorUpdated(oldQuorumNumerator, newQuorumNumerator);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/IGovernor.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/ERC165.sol";

/**
 * @dev Interface of the {Governor} core.
 *
 * _Available since v4.3._
 */
abstract contract IGovernor is IERC165 {
    enum ProposalState {
        Pending,
        Active,
        Canceled,
        Defeated,
        Succeeded,
        Queued,
        Expired,
        Executed
    }

    /**
     * @dev Emitted when a proposal is created.
     */
    event ProposalCreated(
        uint256 proposalId,
        address proposer,
        address[] targets,
        uint256[] values,
        string[] signatures,
        bytes[] calldatas,
        uint256 startBlock,
        uint256 endBlock,
        string description
    );

    /**
     * @dev Emitted when a proposal is canceled.
     */
    event ProposalCanceled(uint256 proposalId);

    /**
     * @dev Emitted when a proposal is executed.
     */
    event ProposalExecuted(uint256 proposalId);

    /**
     * @dev Emitted when a vote is cast.
     *
     * Note: `support` values should be seen as buckets. There interpretation depends on the voting module used.
     */
    event VoteCast(address indexed voter, uint256 proposalId, uint8 support, uint256 weight, string reason);

    /**
     * @notice module:core
     * @dev Name of the governor instance (used in building the ERC712 domain separator).
     */
    function name() public view virtual returns (string memory);

    /**
     * @notice module:core
     * @dev Version of the governor instance (used in building the ERC712 domain separator). Default: "1"
     */
    function version() public view virtual returns (string memory);

    /**
     * @notice module:voting
     * @dev A description of the possible `support` values for {castVote} and the way these votes are counted, meant to
     * be consumed by UIs to show correct vote options and interpret the results. The string is a URL-encoded sequence of
     * key-value pairs that each describe one aspect, for example `support=bravo&quorum=for,abstain`.
     *
     * There are 2 standard keys: `support` and `quorum`.
     *
     * - `support=bravo` refers to the vote options 0 = Against, 1 = For, 2 = Abstain, as in `GovernorBravo`.
     * - `quorum=bravo` means that only For votes are counted towards quorum.
     * - `quorum=for,abstain` means that both For and Abstain votes are counted towards quorum.
     *
     * NOTE: The string can be decoded by the standard
     * https://developer.mozilla.org/en-US/docs/Web/API/URLSearchParams[`URLSearchParams`]
     * JavaScript class.
     */
    // solhint-disable-next-line func-name-mixedcase
    function COUNTING_MODE() public pure virtual returns (string memory);

    /**
     * @notice module:core
     * @dev Hashing function used to (re)build the proposal id from the proposal details..
     */
    function hashProposal(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata calldatas,
        bytes32 descriptionHash
    ) public pure virtual returns (uint256);

    /**
     * @notice module:core
     * @dev Current state of a proposal, following Compound's convention
     */
    function state(uint256 proposalId) public view virtual returns (ProposalState);

    /**
     * @notice module:core
     * @dev Block number used to retrieve user's votes and quorum. As per Compound's Comp and OpenZeppelin's
     * ERC20Votes, the snapshot is performed at the end of this block. Hence, voting for this proposal starts at the
     * beginning of the following block.
     */
    function proposalSnapshot(uint256 proposalId) public view virtual returns (uint256);

    /**
     * @notice module:core
     * @dev Block number at which votes close. Votes close at the end of this block, so it is possible to cast a vote
     * during this block.
     */
    function proposalDeadline(uint256 proposalId) public view virtual returns (uint256);

    /**
     * @notice module:user-config
     * @dev Delay, in number of block, between the proposal is created and the vote starts. This can be increassed to
     * leave time for users to buy voting power, of delegate it, before the voting of a proposal starts.
     */
    function votingDelay() public view virtual returns (uint256);

    /**
     * @notice module:user-config
     * @dev Delay, in number of blocks, between the vote start and vote ends.
     *
     * NOTE: The {votingDelay} can delay the start of the vote. This must be considered when setting the voting
     * duration compared to the voting delay.
     */
    function votingPeriod() public view virtual returns (uint256);

    /**
     * @notice module:user-config
     * @dev Minimum number of cast voted required for a proposal to be successful.
     *
     * Note: The `blockNumber` parameter corresponds to the snaphot used for counting vote. This allows to scale the
     * quroum depending on values such as the totalSupply of a token at this block (see {ERC20Votes}).
     */
    function quorum(uint256 blockNumber) public view virtual returns (uint256);

    /**
     * @notice module:reputation
     * @dev Voting power of an `account` at a specific `blockNumber`.
     *
     * Note: this can be implemented in a number of ways, for example by reading the delegated balance from one (or
     * multiple), {ERC20Votes} tokens.
     */
    function getVotes(address account, uint256 blockNumber) public view virtual returns (uint256);

    /**
     * @notice module:voting
     * @dev Returns weither `account` has cast a vote on `proposalId`.
     */
    function hasVoted(uint256 proposalId, address account) public view virtual returns (bool);

    /**
     * @dev Create a new proposal. Vote start {IGovernor-votingDelay} blocks after the proposal is created and ends
     * {IGovernor-votingPeriod} blocks after the voting starts.
     *
     * Emits a {ProposalCreated} event.
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) public virtual returns (uint256 proposalId);

    /**
     * @dev Execute a successful proposal. This requires the quorum to be reached, the vote to be successful, and the
     * deadline to be reached.
     *
     * Emits a {ProposalExecuted} event.
     *
     * Note: some module can modify the requirements for execution, for example by adding an additional timelock.
     */
    function execute(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) public payable virtual returns (uint256 proposalId);

    /**
     * @dev Cast a vote
     *
     * Emits a {VoteCast} event.
     */
    function castVote(uint256 proposalId, uint8 support) public virtual returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason
     *
     * Emits a {VoteCast} event.
     */
    function castVoteWithReason(
        uint256 proposalId,
        uint8 support,
        string calldata reason
    ) public virtual returns (uint256 balance);

    /**
     * @dev Cast a vote using the user cryptographic signature.
     *
     * Emits a {VoteCast} event.
     */
    function castVoteBySig(
        uint256 proposalId,
        uint8 support,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual returns (uint256 balance);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)
pragma solidity ^0.8.0;

/**
 * @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.
 *
 * _Available since v4.5._
 */
interface IVotes {
    /**
     * @dev Emitted when an account changes their delegate.
     */
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /**
     * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.
     */
    event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);

    /**
     * @dev Returns the current amount of votes that `account` has.
     */
    function getVotes(address account) external view returns (uint256);

    /**
     * @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).
     */
    function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);

    /**
     * @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).
     *
     * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
     * Votes that have not been delegated are still part of total supply, even though they would not participate in a
     * vote.
     */
    function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);

    /**
     * @dev Returns the delegate that `account` has chosen.
     */
    function delegates(address account) external view returns (address);

    /**
     * @dev Delegates votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) external;

    /**
     * @dev Delegates votes from signer to `delegatee`.
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/governance/Governor.sol";
import "@openzeppelin/contracts/governance/extensions/GovernorSettings.sol";
import "@openzeppelin/contracts/governance/extensions/GovernorCountingSimple.sol";
import "@openzeppelin/contracts/governance/extensions/GovernorVotes.sol";
import "@openzeppelin/contracts/governance/extensions/GovernorVotesQuorumFraction.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";

/// @custom:security-contact dennison@dennisonbertram.com
contract PridePunkGovernor is
    Governor,
    GovernorSettings,
    GovernorCountingSimple,
    GovernorVotes,
    GovernorVotesQuorumFraction,
    IERC721Receiver
{
    constructor(IVotes _token)
        Governor("Pride Punk Governor")
        GovernorSettings(
            1, /* 1 block */
            273, /* 1 hour */
            1
        )
        GovernorVotes(_token)
        GovernorVotesQuorumFraction(4)
    {}

    // Enable reciving ERC721s
    function onERC721Received(
        address,
        address,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC721Received.selector;
    }

    // The following functions are overrides required by Solidity.

    function votingDelay() public view override(IGovernor, GovernorSettings) returns (uint256) {
        return super.votingDelay();
    }

    function votingPeriod() public view override(IGovernor, GovernorSettings) returns (uint256) {
        return super.votingPeriod();
    }

    function quorum(uint256 blockNumber)
        public
        view
        override(IGovernor, GovernorVotesQuorumFraction)
        returns (uint256)
    {
        return super.quorum(blockNumber);
    }

    function getVotes(address account, uint256 blockNumber)
        public
        view
        override(IGovernor, GovernorVotes)
        returns (uint256)
    {
        return super.getVotes(account, blockNumber);
    }

    function proposalThreshold() public view override(Governor, GovernorSettings) returns (uint256) {
        return super.proposalThreshold();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Timers.sol)

pragma solidity ^0.8.0;

/**
 * @dev Tooling for timepoints, timers and delays
 */
library Timers {
    struct Timestamp {
        uint64 _deadline;
    }

    function getDeadline(Timestamp memory timer) internal pure returns (uint64) {
        return timer._deadline;
    }

    function setDeadline(Timestamp storage timer, uint64 timestamp) internal {
        timer._deadline = timestamp;
    }

    function reset(Timestamp storage timer) internal {
        timer._deadline = 0;
    }

    function isUnset(Timestamp memory timer) internal pure returns (bool) {
        return timer._deadline == 0;
    }

    function isStarted(Timestamp memory timer) internal pure returns (bool) {
        return timer._deadline > 0;
    }

    function isPending(Timestamp memory timer) internal view returns (bool) {
        return timer._deadline > block.timestamp;
    }

    function isExpired(Timestamp memory timer) internal view returns (bool) {
        return isStarted(timer) && timer._deadline <= block.timestamp;
    }

    struct BlockNumber {
        uint64 _deadline;
    }

    function getDeadline(BlockNumber memory timer) internal pure returns (uint64) {
        return timer._deadline;
    }

    function setDeadline(BlockNumber storage timer, uint64 timestamp) internal {
        timer._deadline = timestamp;
    }

    function reset(BlockNumber storage timer) internal {
        timer._deadline = 0;
    }

    function isUnset(BlockNumber memory timer) internal pure returns (bool) {
        return timer._deadline == 0;
    }

    function isStarted(BlockNumber memory timer) internal pure returns (bool) {
        return timer._deadline > 0;
    }

    function isPending(BlockNumber memory timer) internal view returns (bool) {
        return timer._deadline > block.number;
    }

    function isExpired(BlockNumber memory timer) internal view returns (bool) {
        return isStarted(timer) && timer._deadline <= block.number;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}

{
  "compilationTarget": {
    "contracts/PridePunkGovernor.sol": "PridePunkGovernor"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 800
  },
  "remappings": []
}