// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

pragma solidity 0.8.25;

import {L2OpUSDCDeploy} from 'contracts/L2OpUSDCDeploy.sol';
import {ICreate2Deployer} from 'interfaces/external/ICreate2Deployer.sol';
import {ICrossDomainMessenger} from 'interfaces/external/ICrossDomainMessenger.sol';
import {IOptimismPortal} from 'interfaces/external/IOptimismPortal.sol';

/**
 * @title CrossChainDeployments
 * @notice Library containing logic needed on the L1 Factory to properly deploy contracts on the L2.
 * @dev Logic splitted here to reduce code size on the L1 Factory contract.
 */
library CrossChainDeployments {
  /// @notice RLP encoding deployer length prefix for calculating the address of a contract deployed through `CREATE`
  bytes1 internal constant _LEN = bytes1(0x94);

  /// @notice The status of if the transaction is a contract creation
  bool internal constant _IS_CONTRACT_CREATION = false;

  /// @notice The msg.value sent with the transaction
  uint256 internal constant _VALUE = 0;

  /**
   * @notice Deploys the L2 factory contract through the L1 messenger
   * @param _args The initialization arguments for the L2 factory
   * @param _salt The salt to be used to deploy the L2 factory
   * @param _messenger The address of the L1 messenger
   * @param _create2Deployer The address of the L2 create2 deployer
   * @param _minGasLimit The minimum gas limit that the message can be executed with
   * @return _l2Deploy The address of the L2 factory
   */
  function deployL2Factory(
    bytes memory _args,
    bytes32 _salt,
    address _messenger,
    address _create2Deployer,
    uint32 _minGasLimit
  ) external returns (address _l2Deploy) {
    bytes memory _l2DeployInitCode = bytes.concat(type(L2OpUSDCDeploy).creationCode, _args);
    _l2Deploy = precalculateCreate2Address(_salt, keccak256(_l2DeployInitCode), _create2Deployer);

    bytes memory _l2DeploymentsTx = abi.encodeCall(ICreate2Deployer.deploy, (_VALUE, _salt, _l2DeployInitCode));

    address _portal;

    // Some messengers are still using the legacy `portal` function so we need to handle this case
    try ICrossDomainMessenger(_messenger).portal() returns (address _p) {
      _portal = _p;
    } catch {
      _portal = ICrossDomainMessenger(_messenger).PORTAL();
    }

    IOptimismPortal(_portal).depositTransaction(
      _create2Deployer, _VALUE, _minGasLimit, _IS_CONTRACT_CREATION, _l2DeploymentsTx
    );
  }

  /**
   * @notice Precalculate and address to be deployed using the `CREATE2` opcode
   * @param _salt The 32-byte random value used to create the contract address.
   * @param _initCodeHash The 32-byte bytecode digest of the contract creation bytecode.
   * @param _deployer The 20-byte _deployer address.
   * @return _precalculatedAddress The 20-byte address where a contract will be stored.
   */
  function precalculateCreate2Address(
    bytes32 _salt,
    bytes32 _initCodeHash,
    address _deployer
  ) internal pure returns (address _precalculatedAddress) {
    assembly ("memory-safe") {
      let _ptr := mload(0x40)
      mstore(add(_ptr, 0x40), _initCodeHash)
      mstore(add(_ptr, 0x20), _salt)
      mstore(_ptr, _deployer)
      let _start := add(_ptr, 0x0b)
      mstore8(_start, 0xff)
      _precalculatedAddress := and(keccak256(_start, 85), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
    }
  }

  /**
   * @notice Precalculates the address of a contract that will be deployed thorugh `CREATE` opcode
   * @param _deployer The deployer address
   * @param _nonce The next nonce of the deployer address
   * @return _precalculatedAddress The address where the contract will be stored
   * @dev Only works for nonces between 1 and (2 ** 64 - 2), which is enough for this use case
   */
  function precalculateCreateAddress(
    address _deployer,
    uint256 _nonce
  ) internal pure returns (address _precalculatedAddress) {
    bytes memory _data;

    // A one-byte integer in the [0x00, 0x7f] range uses its own value as a length prefix, there is no
    // additional "0x80 + length" prefix that precedes it.

    if (_nonce <= 0x7f) {
      _data = abi.encodePacked(bytes1(0xd6), _LEN, _deployer, uint8(_nonce));
    }
    // In the case of `_nonce > 0x7f` and `_nonce <= type(uint8).max`, we have the following encoding scheme
    // (the same calculation can be carried over for higher _nonce bytes):
    // 0xda = 0xc0 (short RLP prefix) + 0x1a (= the bytes length of: 0x94 + address + 0x84 + _nonce, in hex),
    // 0x94 = 0x80 + 0x14 (= the bytes length of an address, 20 bytes, in hex),
    // 0x84 = 0x80 + 0x04 (= the bytes length of the _nonce, 4 bytes, in hex).
    else if (_nonce <= type(uint8).max) {
      _data = abi.encodePacked(bytes1(0xd7), _LEN, _deployer, bytes1(0x81), uint8(_nonce));
    } else if (_nonce <= type(uint16).max) {
      _data = abi.encodePacked(bytes1(0xd8), _LEN, _deployer, bytes1(0x82), uint16(_nonce));
    } else if (_nonce <= type(uint24).max) {
      _data = abi.encodePacked(bytes1(0xd9), _LEN, _deployer, bytes1(0x83), uint24(_nonce));
    } else if (_nonce <= type(uint32).max) {
      _data = abi.encodePacked(bytes1(0xda), _LEN, _deployer, bytes1(0x84), uint32(_nonce));
    } else if (_nonce <= type(uint40).max) {
      _data = abi.encodePacked(bytes1(0xdb), _LEN, _deployer, bytes1(0x85), uint40(_nonce));
    } else if (_nonce <= type(uint48).max) {
      _data = abi.encodePacked(bytes1(0xdc), _LEN, _deployer, bytes1(0x86), uint48(_nonce));
    } else if (_nonce <= type(uint56).max) {
      _data = abi.encodePacked(bytes1(0xdd), _LEN, _deployer, bytes1(0x87), uint56(_nonce));
    } else {
      _data = abi.encodePacked(bytes1(0xde), _LEN, _deployer, bytes1(0x88), uint64(_nonce));
    }

    _precalculatedAddress = address(uint160(uint256(keccak256(_data))));
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;

        string _name;
        string _version;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }

    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;

        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");

        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }

    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }

    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Proxy.sol)

pragma solidity ^0.8.20;

import {Proxy} from "../Proxy.sol";
import {ERC1967Utils} from "./ERC1967Utils.sol";

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `implementation`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `implementation`. This will typically be an
     * encoded function call, and allows initializing the storage of the proxy like a Solidity constructor.
     *
     * Requirements:
     *
     * - If `data` is empty, `msg.value` must be zero.
     */
    constructor(address implementation, bytes memory _data) payable {
        ERC1967Utils.upgradeToAndCall(implementation, _data);
    }

    /**
     * @dev Returns the current implementation address.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _implementation() internal view virtual override returns (address) {
        return ERC1967Utils.getImplementation();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.20;

import {IBeacon} from "../beacon/IBeacon.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 */
library ERC1967Utils {
    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.
    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);

        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {Ownable} from '@openzeppelin/contracts/access/Ownable.sol';
import {IUSDC} from 'interfaces/external/IUSDC.sol';

/**
 * @title FallbackProxyAdmin
 * @notice Middleware contract for the L2 Adapter to interact with the USDC proxy.
 * @dev The admin can't call the fallback function of the USDC proxy, meaning it can't interact with the functions
 * such as mint and burn between others. Because of this, the FallbackProxyAdmin contract is used as a middleware,
 * being controlled by the L2OpUSDCBridgeAdapter contract and allowing to call the admin functions through it while
 * also being able to call the fallback function of the USDC proxy.
 */
contract FallbackProxyAdmin is Ownable {
  /// @notice USDC address
  address public immutable USDC;

  /**
   * @notice Construct the FallbackProxyAdmin contract
   * @param _usdc USDC address
   */
  constructor(address _usdc) Ownable(msg.sender) {
    USDC = _usdc;
  }

  /**
   * @notice Changes the admin of the USDC proxy
   * @param _newAdmin Address to transfer proxy administration to
   * @dev Owner should always be the L2 Adapter
   * @dev USDC admin cant interact proxy with implementation so we use this contract as the middleman
   */
  function changeAdmin(address _newAdmin) external onlyOwner {
    IUSDC(USDC).changeAdmin(_newAdmin);
  }

  /**
   * @notice Function to upgrade the usdc proxy to a new implementation
   * @param _newImplementation Address of the new implementation
   */
  function upgradeTo(address _newImplementation) external onlyOwner {
    IUSDC(USDC).upgradeTo(_newImplementation);
  }

  /**
   * @notice Upgrades the USDC proxy to a new implementation and calls a function on the new implementation
   * @param _newImplementation Address of the new implementation
   * @param _data Data to call on the new implementation
   */
  function upgradeToAndCall(address _newImplementation, bytes calldata _data) external onlyOwner {
    IUSDC(USDC).upgradeToAndCall(_newImplementation, _data);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface ICreate2Deployer {
  /**
   * @notice Deploys a contract using the CREATE2 opcode
   * @param _value The value to send with the deployment
   * @param _salt The salt value to use for the deployment
   * @param _code The init code to deploy
   */
  function deploy(uint256 _value, bytes32 _salt, bytes memory _code) external;
}

pragma solidity 0.8.25;

interface ICrossDomainMessenger {
  /**
   * @notice Sends a message to some target address on the other chain. Note that if the call
   *         always reverts, then the message will be unrelayable, and any ETH sent will be
   *         permanently locked. The same will occur if the target on the other chain is
   *         considered unsafe (see the _isUnsafeTarget() function).
   * @param _target      Target contract or wallet address.
   * @param _message     Message to trigger the target address with.
   * @param _minGasLimit Minimum gas limit that the message can be executed with.
   */
  function sendMessage(address _target, bytes calldata _message, uint32 _minGasLimit) external;

  /**
   * @notice Retrieves the address of the contract or wallet that initiated the currently
   *         executing message on the other chain. Will throw an error if there is no message
   *         currently being executed. Allows the recipient of a call to see who triggered it.
   * @return _sender Address of the sender of the currently executing message on the other chain.
   */
  function xDomainMessageSender() external view returns (address _sender);

  /**
   * @notice Returns the address of the portal.
   * @return _portal Address of the portal.
   */
  function portal() external view returns (address _portal);

  /**
   * @notice Returns the address of the portal.
   * @dev This is a legacy function that is used for any legacy messengers.
   * @return _portal Address of the portal.
   */
  // solhint-disable-next-line func-name-mixedcase
  function PORTAL() external view returns (address _portal);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IL1OpUSDCBridgeAdapter {
  /*///////////////////////////////////////////////////////////////
                            EVENTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Emitted when the burn amount is set
   * @param _burnAmount The amount to be burned
   */
  event BurnAmountSet(uint256 _burnAmount);

  /**
   * @notice Emitted when the migration process is complete
   * @param _burnedAmount The amount of USDC tokens that were burned
   */
  event MigrationComplete(uint256 _burnedAmount);

  /*///////////////////////////////////////////////////////////////
                            LOGIC
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Initiates the process to migrate the bridged USDC to native USDC
   * @param _roleCaller The address that will be allowed to transfer the usdc roles
   * @param _burnCaller The address that will be allowed to call this contract to burn the USDC tokens
   * @param _minGasLimitReceiveOnL2 Minimum gas limit that the message can be executed with on L2
   * @param _minGasLimitSetBurnAmount Minimum gas limit that the message can be executed with to set the burn amount
   */
  function migrateToNative(
    address _roleCaller,
    address _burnCaller,
    uint32 _minGasLimitReceiveOnL2,
    uint32 _minGasLimitSetBurnAmount
  ) external;

  /**
   * @notice Sets the amount of USDC tokens that will be burned when the burnLockedUSDC function is called
   * @param _amount The amount of USDC tokens that will be burned
   * @dev Only callable by a whitelisted messenger during its migration process
   */
  function setBurnAmount(uint256 _amount) external;

  /**
   * @notice Burns the USDC tokens locked in the contract
   * @dev The amount is determined by the burnAmount variable, which is set in the setBurnAmount function
   */
  function burnLockedUSDC() external;

  /**
   * @notice Send a message to the linked adapter to call receiveStopMessaging() and stop outgoing messages.
   * @dev Only callable by the owner of the adapter
   * @dev Setting isMessagingDisabled to true is an irreversible operation
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function stopMessaging(uint32 _minGasLimit) external;

  /**
   * @notice Resume messaging on the messenger
   * @dev Only callable by the owner
   * @dev Can't resume deprecated messengers
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function resumeMessaging(uint32 _minGasLimit) external;

  /**
   * @notice Receives a message from L2 if the adapter is deprecated and a user is withdrawing locked funds
   * @dev If the _spender is still locked, the user will be forced to replay this message
   * @param _spender The user that initially provided the tokens
   * @param _amount The amount of tokens to withdraw
   */
  function receiveWithdrawLockedFundsPostMigration(address _spender, uint256 _amount) external;

  /*///////////////////////////////////////////////////////////////
                            VARIABLES
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Fetches the amount of USDC tokens that will be burned when the burnLockedUSDC function is called
   * @return _burnAmount The amount of USDC tokens that will be burned
   */
  function burnAmount() external view returns (uint256 _burnAmount);

  /**
   * @notice Fetches the address of the burn caller
   * @return _burnCaller The address of the burn caller
   */
  function burnCaller() external view returns (address _burnCaller);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {IUSDC} from './external/IUSDC.sol';

// solhint-disable func-name-mixedcase
interface IL1OpUSDCFactory {
  /**
   * @notice The struct to hold the deployments data to deploy the L2 Factory, L2 adapter, and the L2 USDC contracts
   * @param l2AdapterOwner The address of the owner of the L2 adapter
   * @param usdcImplAddr The address of the USDC implementation on L2 to connect the proxy to
   * @param minGasLimitDeploy The minimum gas limit for deploying the L2 Deploy, L2 adapter, and L2 USDC proxy
   * @param usdcInitTxs The initialization transactions to be executed on the USDC contract. The `initialize()` first
   * init tx must not be included since it is defined in the L2 factory contract
   */
  struct L2Deployments {
    address l2AdapterOwner;
    address usdcImplAddr;
    uint32 minGasLimitDeploy;
    bytes[] usdcInitTxs;
  }

  /*///////////////////////////////////////////////////////////////
                            EVENTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Emitted when the `L1OpUSDCBridgeAdapter` is deployed
   * @param _l1Adapter The address of the L1 adapter
   * @param _l2Deploy The address of the L2 deployer contract
   * @param _l2Adapter The address of the L2 adapter
   */
  event ProtocolDeployed(address _l1Adapter, address _l2Deploy, address _l2Adapter);

  /*///////////////////////////////////////////////////////////////
                            ERRORS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Thrown when the `initialize()` tx is provided as the first init tx for the USDC contract
   */
  error IL1OpUSDCFactory_NoInitializeTx();

  /*///////////////////////////////////////////////////////////////
                            LOGIC
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Deploys the L1 Adapter, and sends the deployment txs for the L2 factory, L2 adapter and the L2 USDC through
   * the L1 messenger
   * @param _l1Messenger The address of the L1 messenger for the L2 Op chain
   * @param _l1AdapterOwner The address of the owner of the L1 adapter
   * @param _chainName The name of the L2 Op chain
   * @param _l2Deployments The deployments data for the L2 adapter, and the L2 USDC contracts
   * @return _l1Adapter The address of the L1 adapter
   * @return _l2Deploy The address of the L2 deployer contract
   * @return _l2Adapter The address of the L2 adapter
   * @dev It can fail on L2 due to a gas miscalculation, but in that case the tx can be replayed. It only deploys 1 L2
   * factory per L2 deployments, to make sure the nonce is being tracked correctly while precalculating addresses
   * @dev The implementation of the USDC contract needs to be deployed on L2 before this is called
   * Then set the `usdcImplAddr` in the L2Deployments struct to the address of the deployed USDC implementation contract
   *
   * @dev IMPORTANT!!!!
   * The _l2Deployments.usdcInitTxs must be manually entered to correctly initialize the USDC contract on L2.
   * If a function is not included in the init txs, it could lead to potential attack vectors.
   * We currently hardcode the `initialize()` function in the L2 factory contract, to correctly configure the setup
   * You must provide the following init txs:
   * - initalizeV2
   * - initilizeV2_1
   * - initializeV2_2
   *
   * It is also important to note that circle may add more init functions in future implementations
   * This is up to the deployer to check and be sure all init transactions are included
   */
  function deploy(
    address _l1Messenger,
    address _l1AdapterOwner,
    string calldata _chainName,
    L2Deployments calldata _l2Deployments
  ) external returns (address _l1Adapter, address _l2Deploy, address _l2Adapter);

  /*///////////////////////////////////////////////////////////////
                            VARIABLES
  ///////////////////////////////////////////////////////////////*/

  /**
   * @return _l2Create2Deployer The address of the `create2Deployer` contract on L2
   */
  function L2_CREATE2_DEPLOYER() external view returns (address _l2Create2Deployer);

  /**
   * @return _usdc The address of USDC on L1
   */
  function USDC() external view returns (IUSDC _usdc);

  /**
   * @return _name The name of the USDC token
   * @dev If the 3rd party team wants to update the name, it can be done on the `initialize2()` 2nd init tx
   */
  function USDC_NAME() external view returns (string memory _name);

  /**
   * @return _symbol The symbol of the USDC token
   */
  function USDC_SYMBOL() external view returns (string memory _symbol);

  /**
   * @return _deploymentsSaltCounter The counter for the deployments salt to be used on the L2 factory deployment
   */
  function deploymentsSaltCounter() external view returns (uint256 _deploymentsSaltCounter);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {FallbackProxyAdmin} from 'contracts/utils/FallbackProxyAdmin.sol';

interface IL2OpUSDCBridgeAdapter {
  /*///////////////////////////////////////////////////////////////
                            EVENTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Emitted when the owner message is sent
   * @param _functionSignature The signature of the function sent
   */
  event USDCFunctionSent(bytes4 _functionSignature);

  /**
   * @notice Emitted when a `receiveMessage` call message is replayed after the adapter was deprecated
   * @param _spender The address that provided the tokens
   * @param _amount The amount of USDC sent back to L1
   */
  event ReplayedFundsSentBackToL1(address _spender, uint256 _amount);

  /**
   * @notice Emitted when the locked funds are sent back to L1
   * @param _spender The address that provided the tokens
   * @param _amountSent The amount of tokens that were withdrawn
   */
  event LockedFundsSentBackToL1(address indexed _spender, uint256 _amountSent);

  /*///////////////////////////////////////////////////////////////
                            LOGIC
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Initiates the process to migrate the bridged USDC to native USDC
   * @dev Full migration can't finish until L1 receives the message for setting the burn amount
   * @param _roleCaller The address that will be allowed to transfer the USDC roles
   * @param _setBurnAmountMinGasLimit Minimum gas limit that the setBurnAmount message can be executed on L1
   */
  function receiveMigrateToNative(address _roleCaller, uint32 _setBurnAmountMinGasLimit) external;

  /**
   * @notice Transfer the USDC roles to the new owner
   * @param _owner The address to transfer ownership to
   * @dev Can only be called by the role caller set in the migration process
   */
  function transferUSDCRoles(address _owner) external;

  /**
   * @notice Receive the stop messaging message from the linked adapter and stop outgoing messages
   */
  function receiveStopMessaging() external;

  /**
   * @notice Resume messaging after it was stopped
   */
  function receiveResumeMessaging() external;

  /**
   * @notice Call with arbitrary calldata on USDC contract.
   * @dev can't execute the following list of transactions:
   *  • transferOwnership (0xf2fde38b)
   *  • changeAdmin (0x8f283970)
   * @dev UpgradeTo and UpgradeToAndCall go through the fallback admin
   * @param _data The calldata to execute on the USDC contract
   */
  function callUsdcTransaction(bytes calldata _data) external;

  /*///////////////////////////////////////////////////////////////
                            VARIABLES
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Fetches the address of the role caller
   * @return _roleCaller The address of the role caller
   */
  function roleCaller() external view returns (address _roleCaller);

  /**
   * @return _fallbackProxyAdmin The address of the fallback proxy admin
   * @dev The admin can't call the fallback function of the USDC proxy, meaning it can't interact with the functions
   * such as mint and burn between others. Because of this, the FallbackProxyAdmin contract is used as a middleware,
   * being controlled by the L2OpUSDCBridgeAdapter contract and allowing to call the admin functions through it while
   * also being able to call the fallback function of the USDC proxy.
   * @dev Declared with immutable notation even though it is not defined on the constructor because it is set on the
   * `initialize` function which replicates the behavior of the constructor.
   */
  // solhint-disable-next-line func-name-mixedcase
  function FALLBACK_PROXY_ADMIN() external view returns (FallbackProxyAdmin _fallbackProxyAdmin);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IL2OpUSDCDeploy {
  /*///////////////////////////////////////////////////////////////
                            STRUCTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice The struct to hold the USDC data for the name, symbol, currency, and decimals when initializing
   * @param tokenName The name of the USDC token
   * @param tokenSymbol The symbol of the USDC token
   * @param tokenCurrency The currency that the USDC token represents
   * @param tokenDecimals The number of decimals that the USDC token uses
   */
  struct USDCInitializeData {
    string tokenName;
    string tokenSymbol;
    string tokenCurrency;
    uint8 tokenDecimals;
  }

  /*///////////////////////////////////////////////////////////////
                            EVENTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Emitted when the USDC implementation is deployed
   * @param _l2UsdcImplementation The address of the L2 USDC implementation
   */
  event USDCImplementationDeployed(address _l2UsdcImplementation);

  /**
   * @notice Emitted when the USDC proxy is deployed
   * @param _l2UsdcProxy The address of the L2 USDC proxy
   */
  event USDCProxyDeployed(address _l2UsdcProxy);

  /**
   * @notice Emitted when the L2 adapter is deployed
   * @param _l2Adapter The address of the L2 adapter
   */
  event L2AdapterDeployed(address _l2Adapter);

  /*///////////////////////////////////////////////////////////////
                            ERRORS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Thrown when a contract deployment fails
   */
  error IL2OpUSDCDeploy_DeploymentFailed();

  /**
   * @notice Thrown when an USDC initialization tx failed
   * @param _txIndex The index of the failed initialization tx
   */
  error IL2OpUSDCDeploy_InitializationFailed(uint256 _txIndex);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IOpUSDCBridgeAdapter {
  /*///////////////////////////////////////////////////////////////
                            ENUMS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice The status of an L1 Messenger
   * @param Active The messenger is active
   * @param Paused The messenger is paused
   * @param Upgrading The messenger is upgrading
   * @param Deprecated The messenger is deprecated
   */
  enum Status {
    Active,
    Paused,
    Upgrading,
    Deprecated
  }

  /*///////////////////////////////////////////////////////////////
                          STRUCTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice The struct to hold the data for a bridge message with signature
   * @param to The target address on the destination chain
   * @param amount The amount of tokens to send
   * @param deadline The deadline for the message to be executed
   * @param nonce The nonce of the user
   * @param minGasLimit The minimum gas limit for the message to be executed
   */
  struct BridgeMessage {
    address to;
    uint256 amount;
    uint256 deadline;
    uint256 nonce;
    uint32 minGasLimit;
  }

  /*///////////////////////////////////////////////////////////////
                            EVENTS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Emitted when messaging is stopped
   * @param _messenger The address of the messenger contract that was stopped
   */
  event MessagingStopped(address _messenger);

  /**
   * @notice Emitted when a message is sent to the linked adapter
   * @param _user The user that sent the message
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _messenger The address of the messenger contract that was sent through
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  event MessageSent(
    address indexed _user, address indexed _to, uint256 _amount, address indexed _messenger, uint32 _minGasLimit
  );

  /**
   * @notice Emitted when a message as received
   * @param _spender The address that provided the tokens
   * @param _user The user that received the message
   * @param _amount The amount of tokens received
   * @param _messenger The address of the messenger contract that was received through
   */
  event MessageReceived(address indexed _spender, address indexed _user, uint256 _amount, address indexed _messenger);

  /**
   * @notice Emitted when messaging is resumed
   * @param _messenger The address of the messenger that was resumed
   */
  event MessagingResumed(address _messenger);

  /**
   * @notice Emitted when the adapter is migrating usdc to native
   * @param _messenger The address of the messenger contract that is doing the migration
   * @param _caller The address that will be allowed to call the permissioned function on the given chain
   * @dev On L1 _caller can call burnLockedUSDC
   * @dev On L2 _caller can call transferUSDCRoles
   */
  event MigratingToNative(address _messenger, address _caller);

  /**
   * @notice Emitted when a message fails
   * @param _spender The address that provided the tokens
   * @param _user The user that the message failed for
   * @param _amount The amount of tokens that were added to the blacklisted funds
   * @param _messenger The address of the messenger that the message failed for
   */
  event MessageFailed(address indexed _spender, address indexed _user, uint256 _amount, address indexed _messenger);

  /**
   * @notice Emitted when the any previously locked funds are withdrawn outside of the traditional bridging flows
   * @param _user The user that the funds were withdrawn for
   * @param _amountWithdrawn The amount of tokens that were withdrawn
   */
  event LockedFundsWithdrawn(address indexed _user, uint256 _amountWithdrawn);

  /**
   * @notice Emitted when a nonce is canceled
   * @param _caller The caller
   * @param _nonce The nonce that was canceled
   */
  event NonceCanceled(address _caller, uint256 _nonce);

  /*///////////////////////////////////////////////////////////////
                            ERRORS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Error when burnLockedUSDC is called before a burn amount is set
   */
  error IOpUSDCBridgeAdapter_BurnAmountNotSet();

  /**
   * @notice Error when the caller is not the roleCaller
   */
  error IOpUSDCBridgeAdapter_InvalidCaller();

  /**
   * @notice Error when address is not valid
   */
  error IOpUSDCBridgeAdapter_InvalidAddress();

  /**
   * @notice Error when the owner transaction is invalid
   */
  error IOpUSDCBridgeAdapter_InvalidTransaction();

  /**
   * @notice Error when signature is not valid
   */
  error IOpUSDCBridgeAdapter_ForbiddenTransaction();

  /**
   * @notice Error when messaging is disabled
   */
  error IOpUSDCBridgeAdapter_MessagingDisabled();

  /**
   * @notice Error when messaging is enabled
   */
  error IOpUSDCBridgeAdapter_MessagingEnabled();

  /**
   * @notice Error when the caller is not the linked adapter
   */
  error IOpUSDCBridgeAdapter_InvalidSender();

  /**
   * @notice Error when the nonce is already used for the given signature
   */
  error IOpUSDCBridgeAdapter_InvalidNonce();

  /**
   * @notice Error when the signature is invalid
   */
  error IOpUSDCBridgeAdapter_InvalidSignature();

  /**
   * @notice Error when the deadline has passed
   */
  error IOpUSDCBridgeAdapter_MessageExpired();

  /**
   * @notice Error when the contract is not in the upgrading state
   */
  error IOpUSDCBridgeAdapter_NotUpgrading();

  /**
   * @notice Error when the address is blacklisted
   */
  error IOpUSDCBridgeAdapter_BlacklistedAddress();

  /**
   *  @notice Error when bridgedUSDC has not been migrated yet to native USDC
   */
  error IOpUSDCBridgeAdapter_NotMigrated();

  /*///////////////////////////////////////////////////////////////
                            LOGIC
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Initialize the contract
   * @param _owner The owner of the contract
   * @dev This function needs only used during the deployment of the proxy contract, and it is disabled for the
   * implementation contract
   */
  function initialize(address _owner) external;

  /**
   * @notice Send tokens to another chain through the linked adapter
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(address _to, uint256 _amount, uint32 _minGasLimit) external;

  /**
   * @notice Send signer tokens to another chain through the linked adapter
   * @param _signer The address of the user sending the message
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _signature The signature of the user
   * @param _nonce The nonce of the user
   * @param _deadline The deadline for the message to be executed
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(
    address _signer,
    address _to,
    uint256 _amount,
    bytes calldata _signature,
    uint256 _nonce,
    uint256 _deadline,
    uint32 _minGasLimit
  ) external;

  /**
   * @notice Receive the message from the other chain and mint or transfer tokens to the user
   * @dev This function should only be called when receiving a message to mint or transfer tokens
   * @param _user The user to mint or transfer the tokens for
   * @param _spender The address that provided the tokens
   * @param _amount The amount of tokens to transfer or mint
   */
  function receiveMessage(address _user, address _spender, uint256 _amount) external;

  /**
   * @notice Withdraws the locked funds from the contract if they get unlocked
   * @param _spender The address that provided the tokens
   * @param _user The user to withdraw the funds for
   */
  function withdrawLockedFunds(address _spender, address _user) external;

  /**
   * @notice Cancels a signature by setting the nonce as used
   * @param _nonce The nonce of the signature to cancel
   */
  function cancelSignature(uint256 _nonce) external;

  /*///////////////////////////////////////////////////////////////
                            VARIABLES
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Fetches address of the USDC token
   * @return _usdc Address of the USDC token
   */
  // solhint-disable-next-line func-name-mixedcase
  function USDC() external view returns (address _usdc);

  /**
   * @notice Fetches address of the linked adapter on L2 to send messages to and receive from
   * @return _linkedAdapter Address of the linked adapter
   */
  // solhint-disable-next-line func-name-mixedcase
  function LINKED_ADAPTER() external view returns (address _linkedAdapter);

  /**
   * @notice Fetches address of the CrossDomainMessenger to send messages to L1 <-> L2
   * @return _messenger Address of the messenger
   */
  // solhint-disable-next-line func-name-mixedcase
  function MESSENGER() external view returns (address _messenger);

  /**
   * @notice Fetches the status of the messenger
   * @return _status The status of the messenger
   */
  function messengerStatus() external view returns (Status _status);

  /**
   * @notice Returns the nonce of a given user to avoid replay attacks
   * @param _user The user to check for
   * @param _nonce The nonce to check for
   * @return _used If the nonce has been used
   */
  function userNonces(address _user, uint256 _nonce) external view returns (bool _used);

  /**
   * @notice Returns the amount of funds locked that got locked for a specific user
   * @param _spender The address that provided the tokens
   * @param _user The user to check for
   * @return _lockedAmount The amount of funds locked from locked messages
   */
  function lockedFundsDetails(address _spender, address _user) external view returns (uint256 _lockedAmount);
}

pragma solidity 0.8.25;

interface IOptimismPortal {
  /**
   * @notice Accepts deposits of ETH and data, and emits a TransactionDeposited event for use in
   *         deriving deposit transactions. Note that if a deposit is made by a contract, its
   *         address will be aliased when retrieved using `tx.origin` or `msg.sender`. Consider
   *         using the CrossDomainMessenger contracts for a simpler developer experience.
   * @param _to         Target address on L2.
   * @param _value      ETH value to send to the recipient.
   * @param _gasLimit   Amount of L2 gas to purchase by burning gas on L1.
   * @param _isCreation Whether or not the transaction is a contract creation.
   * @param _data       Data to trigger the recipient with.
   */
  function depositTransaction(
    address _to,
    uint256 _value,
    uint64 _gasLimit,
    bool _isCreation,
    bytes memory _data
  ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';

interface IUSDC is IERC20 {
  /**
   * @notice Mints USDC tokens
   * @param _to Address to mint tokens to
   * @param _amount Amount of tokens to mint
   */
  function mint(address _to, uint256 _amount) external;

  /**
   * @notice allows a minter to burn some of its own tokens
   * Validates that caller is a minter and that sender is not blacklisted
   * amount is less than or equal to the minter's account balance
   * @param _amount uint256 the amount of tokens to be burned
   */
  function burn(uint256 _amount) external;

  /**
   * @notice Transfers USDC ownership  to another address
   * @param _newOwner Address to transfer ownership to
   */
  function transferOwnership(address _newOwner) external;

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external;

  /**
   * @notice Initializes the fiat token contract.
   * @param _tokenName       The name of the fiat token.
   * @param _tokenSymbol     The symbol of the fiat token.
   * @param _tokenCurrency   The fiat currency that the token represents.
   * @param _tokenDecimals   The number of decimals that the token uses.
   * @param _newMasterMinter The masterMinter address for the fiat token.
   * @param _newPauser       The pauser address for the fiat token.
   * @param _newBlacklister  The blacklister address for the fiat token.
   * @param _newOwner        The owner of the fiat token.
   */
  function initialize(
    string memory _tokenName,
    string memory _tokenSymbol,
    string memory _tokenCurrency,
    uint8 _tokenDecimals,
    address _newMasterMinter,
    address _newPauser,
    address _newBlacklister,
    address _newOwner
  ) external;

  /**
   * @notice Initialize v2
   * @param _newName   New token name
   */
  // solhint-disable-next-line func-name-mixedcase
  function initializeV2(string calldata _newName) external;

  /**
   * @notice Initialize v2.1
   * @param _lostAndFound  The address to which the locked funds are sent
   */
  // solhint-disable-next-line func-name-mixedcase
  function initializeV2_1(address _lostAndFound) external;

  /**
   * @notice Initialize v2.2
   * @param _accountsToBlacklist   A list of accounts to migrate from the old blacklist
   * @param _newSymbol             New token symbol
   * data structure to the new blacklist data structure.
   */
  // solhint-disable-next-line func-name-mixedcase
  function initializeV2_2(address[] calldata _accountsToBlacklist, string calldata _newSymbol) external;

  /**
   * @dev Function to add/update a new minter
   * @param _minter The address of the minter
   * @param _minterAllowedAmount The minting amount allowed for the minter
   * @return _result True if the operation was successful.
   */
  function configureMinter(address _minter, uint256 _minterAllowedAmount) external returns (bool _result);

  /**
   * @notice Removes a minter.
   * @param _minter The address of the minter to remove.
   * @return _result True if the operation was successful.
   */
  function removeMinter(address _minter) external returns (bool _result);

  /**
   * @notice Updates the master minter address.
   * @param _newMasterMinter The address of the new master minter.
   */
  function updateMasterMinter(address _newMasterMinter) external;

  /**
   * @notice Adds account to blacklist
   * @param _account The address to blacklist
   */
  function blacklist(address _account) external;

  /**
   * @notice Removes account from blacklist.
   * @param _account The address to remove from the blacklist.
   */
  function unBlacklist(address _account) external;

  /**
   * @notice Function to upgrade the usdc proxy to a new implementation
   * @param _newImplementation Address of the new implementation
   */
  function upgradeTo(address _newImplementation) external;

  /**
   * @notice Upgrades the USDC proxy to a new implementation and calls a function on the new implementation
   * @param _newImplementation Address of the new implementation
   * @param _data Data to call on the new implementation
   */
  function upgradeToAndCall(address _newImplementation, bytes calldata _data) external;

  /**
   * @notice Returns the current implementation address
   * @return _implementation Address of the current implementation
   */
  function implementation() external view returns (address _implementation);

  /**
   * @notice Returns the current master minter address
   * @return _masterMinter Address of the current master minter
   */
  function masterMinter() external view returns (address _masterMinter);

  /**
   * @notice Returns the current owner address
   * @return _owner Address of the current owner
   */
  function owner() external view returns (address _owner);

  /**
   * @return _currency The currency of the token
   */
  function currency() external view returns (string memory _currency);

  /**
   * @return _decimals The decimals of the token
   */
  function decimals() external view returns (uint8 _decimals);

  /**
   * @return _name The name of the token
   */
  function name() external view returns (string memory _name);

  /**
   * @return _symbol The symbol of the token
   */
  function symbol() external view returns (string memory _symbol);

  /**
   * @notice Checks if an account is a minter.
   * @param _account The address to check.
   * @return _isMinter True if the account is a minter, false if the account is not a minter.
   */
  function isMinter(address _account) external view returns (bool _isMinter);

  /**
   * @notice Returns the allowance of a minter
   * @param _minter The address of the minter
   * @return _allowance The minting amount allowed for the minter
   */
  function minterAllowance(address _minter) external view returns (uint256 _allowance);

  /**
   * @notice Returns the address of the current pauser
   * @return _pauser Address of the current pauser
   */
  function pauser() external view returns (address _pauser);

  /**
   * @notice Returns the address of the current blacklister
   * @return _blacklister Address of the current blacklister
   */
  function blacklister() external view returns (address _blacklister);

  /**
   * @notice Checks if account is blacklisted
   * @param _account The address to check
   * @return _result True if the account is blacklisted, false if not
   */
  function isBlacklisted(address _account) external view returns (bool _result);

  /**
   * @notice Returns the address of the current admin
   * @return _admin Address of the current admin
   */
  function admin() external view returns (address _admin);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {SafeERC20} from '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {OpUSDCBridgeAdapter} from 'contracts/universal/OpUSDCBridgeAdapter.sol';
import {IL1OpUSDCBridgeAdapter} from 'interfaces/IL1OpUSDCBridgeAdapter.sol';
import {IL2OpUSDCBridgeAdapter} from 'interfaces/IL2OpUSDCBridgeAdapter.sol';
import {IOpUSDCBridgeAdapter} from 'interfaces/IOpUSDCBridgeAdapter.sol';
import {ICrossDomainMessenger} from 'interfaces/external/ICrossDomainMessenger.sol';
import {IUSDC} from 'interfaces/external/IUSDC.sol';

/**
 * @title L1OpUSDCBridgeAdapter
 * @notice L1OpUSDCBridgeAdapter is a contract that bridges Bridged USDC from L1 to L2 and and receives it from L2.
 * It is also in charge of pausing and resuming messaging between the L1 and L2 adapters, and properly initiating the
 * migration process to the for bridged USDC to native.
 */
contract L1OpUSDCBridgeAdapter is IL1OpUSDCBridgeAdapter, OpUSDCBridgeAdapter {
  using SafeERC20 for IUSDC;

  /// @inheritdoc IL1OpUSDCBridgeAdapter
  uint256 public burnAmount;

  /// @inheritdoc IL1OpUSDCBridgeAdapter
  address public burnCaller;

  /// @notice Reserve 50 more storage slots to be safe on future upgrades
  uint256[50] private __gap;

  /**
   * @notice Construct the OpUSDCBridgeAdapter contract
   * @param _usdc The address of the USDC Contract to be used by the adapter
   * @param _messenger The address of the L1 messenger
   * @param _linkedAdapter The address of the linked adapter
   * @dev The constructor is only used to initialize the OpUSDCBridgeAdapter immutable variables
   */
  constructor(
    address _usdc,
    address _messenger,
    address _linkedAdapter
  ) OpUSDCBridgeAdapter(_usdc, _messenger, _linkedAdapter) {}

  /**
   * @notice Sets the owner of the contract
   * @param _owner The address of the owner
   * @dev This function needs only used during the deployment of the proxy contract, and it is disabled for the
   * implementation contract
   */
  function initialize(address _owner) external virtual override initializer {
    __Ownable_init(_owner);
    string memory _name = 'OpUSDCBridgeAdapter';
    string memory _version = '1.0.0';
    __EIP712_init(_name, _version);
  }

  /*///////////////////////////////////////////////////////////////
                              MIGRATION
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Initiates the process to migrate the bridged USDC to native USDC
   * @param _roleCaller The address that will be allowed to transfer the usdc roles
   * @param _burnCaller The address that will be allowed to call this contract to burn the USDC tokens
   * @param _minGasLimitReceiveOnL2 Minimum gas limit that the message can be executed with on L2
   * @param _minGasLimitSetBurnAmount Minimum gas limit that the message can be executed with to set the burn amount
   * @dev Migrating to native is irreversible and will deprecate these adapters
   */
  function migrateToNative(
    address _roleCaller,
    address _burnCaller,
    uint32 _minGasLimitReceiveOnL2,
    uint32 _minGasLimitSetBurnAmount
  ) external onlyOwner {
    // Leave this flow open to resend upgrading flow in case message fails on L2
    // Circle's USDC implementation of `transferOwnership` reverts on address(0)
    if (_roleCaller == address(0) || _burnCaller == address(0)) revert IOpUSDCBridgeAdapter_InvalidAddress();

    // Ensure messaging is enabled
    if (messengerStatus != Status.Active && messengerStatus != Status.Upgrading) {
      revert IOpUSDCBridgeAdapter_MessagingDisabled();
    }

    burnCaller = _burnCaller;
    messengerStatus = Status.Upgrading;

    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER,
      abi.encodeCall(IL2OpUSDCBridgeAdapter.receiveMigrateToNative, (_roleCaller, _minGasLimitSetBurnAmount)),
      _minGasLimitReceiveOnL2
    );

    emit MigratingToNative(MESSENGER, _burnCaller);
  }

  /**
   * @notice Sets the amount of USDC tokens that will be burned when the burnLockedUSDC function is called
   * @param _amount The amount of USDC tokens that will be burned
   * @dev Only callable by a whitelisted messenger during its migration process
   */
  function setBurnAmount(uint256 _amount) external onlyLinkedAdapter {
    if (messengerStatus != Status.Upgrading) revert IOpUSDCBridgeAdapter_NotUpgrading();

    burnAmount = _amount;
    messengerStatus = Status.Deprecated;

    emit BurnAmountSet(_amount);
  }

  /**
   * @notice Burns the USDC tokens locked in the contract
   * @dev The amount is determined by the burnAmount variable, which is set in the setBurnAmount function
   */
  function burnLockedUSDC() external {
    if (msg.sender != burnCaller) revert IOpUSDCBridgeAdapter_InvalidSender();

    // If the adapter is not deprecated the burn amount has not been set
    if (messengerStatus != Status.Deprecated) revert IOpUSDCBridgeAdapter_BurnAmountNotSet();

    // NOTE: This is a very edge case and will only happen if the chain operator adds a second minter on L2
    // So now this adapter doesnt have the full backing supply locked in this contract
    // in case the bridged usdc token has other minters and the supply sent is greater then what we have
    // We need to burn the full amount stored in this contract
    // This could also cause in-flight messages to fail because of the multiple supply sources
    uint256 _burnAmount = burnAmount;
    uint256 _balanceOf = IUSDC(USDC).balanceOf(address(this));
    _burnAmount = _burnAmount > _balanceOf ? _balanceOf : _burnAmount;

    // Burn the USDC tokens
    if (_burnAmount != 0) {
      IUSDC(USDC).burn(_burnAmount);
    }

    // Set the burn amount to 0
    burnAmount = 0;
    burnCaller = address(0);
    emit MigrationComplete(_burnAmount);
  }

  /*///////////////////////////////////////////////////////////////
                          ADMIN CONTROL
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Send a message to the linked adapter to call receiveStopMessaging() and stop outgoing messages.
   * @dev Only callable by the owner of the adapter
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function stopMessaging(uint32 _minGasLimit) external onlyOwner {
    // Ensure messaging is enabled
    // If its paused we still leave this function open to be called in case the message fails on L2
    if (messengerStatus != Status.Active && messengerStatus != Status.Paused) {
      revert IOpUSDCBridgeAdapter_MessagingDisabled();
    }

    messengerStatus = Status.Paused;

    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER, abi.encodeCall(IL2OpUSDCBridgeAdapter.receiveStopMessaging, ()), _minGasLimit
    );

    emit MessagingStopped(MESSENGER);
  }

  /**
   * @notice Resume messaging on the messenger
   * @dev Only callable by the owner
   * @dev Can't resume deprecated or upgrading messengers
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function resumeMessaging(uint32 _minGasLimit) external onlyOwner {
    // Ensure messaging is disabled
    // If its active we still leave this function open to be called in case the message fails on L2
    if (messengerStatus != Status.Paused && messengerStatus != Status.Active) {
      revert IOpUSDCBridgeAdapter_MessagingEnabled();
    }

    messengerStatus = Status.Active;

    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER, abi.encodeCall(IL2OpUSDCBridgeAdapter.receiveResumeMessaging, ()), _minGasLimit
    );

    emit MessagingResumed(MESSENGER);
  }

  /*///////////////////////////////////////////////////////////////
                             MESSAGING
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Send tokens to another chain through the linked adapter
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(address _to, uint256 _amount, uint32 _minGasLimit) external override {
    if (_to == address(0)) revert IOpUSDCBridgeAdapter_InvalidAddress();

    // Ensure the address is not blacklisted
    if (IUSDC(USDC).isBlacklisted(_to)) revert IOpUSDCBridgeAdapter_BlacklistedAddress();

    // Ensure messaging is enabled
    if (messengerStatus != Status.Active) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    _sendMessage(msg.sender, _to, _amount, _minGasLimit);
  }

  /**
   * @notice Send signer tokens to another chain through the linked adapter
   * @param _signer The address of the user sending the message
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _signature The signature of the user
   * @param _nonce The nonce of the user
   * @param _deadline The deadline for the message to be executed
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(
    address _signer,
    address _to,
    uint256 _amount,
    bytes calldata _signature,
    uint256 _nonce,
    uint256 _deadline,
    uint32 _minGasLimit
  ) external override {
    if (_to == address(0)) revert IOpUSDCBridgeAdapter_InvalidAddress();

    // Ensure the address is not blacklisted
    if (IUSDC(USDC).isBlacklisted(_to)) revert IOpUSDCBridgeAdapter_BlacklistedAddress();

    // Ensure messaging is enabled
    if (messengerStatus != Status.Active) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    // Ensure the nonce has not already been used
    if (userNonces[_signer][_nonce]) revert IOpUSDCBridgeAdapter_InvalidNonce();

    // Ensure the deadline has not passed
    if (block.timestamp > _deadline) revert IOpUSDCBridgeAdapter_MessageExpired();

    BridgeMessage memory _message =
      BridgeMessage({to: _to, amount: _amount, deadline: _deadline, nonce: _nonce, minGasLimit: _minGasLimit});

    _checkSignature(_signer, _hashMessageStruct(_message), _signature);

    // Mark the nonce as used
    userNonces[_signer][_nonce] = true;

    _sendMessage(_signer, _to, _amount, _minGasLimit);
  }

  /**
   * @notice Receive the message from the other chain and transfer tokens to the user
   * @dev This function should only be called when receiving a message to transfer tokens
   * @dev If the transfer fails the funds might be recovered by calling withdrawLockedFunds
   * @param _user The user to transfer the tokens to
   * @param _spender The address that provided the tokens
   * @param _amount The amount of tokens to transfer
   */
  function receiveMessage(address _user, address _spender, uint256 _amount) external override onlyLinkedAdapter {
    // Transfer the tokens to the user
    try this.attemptTransfer(_user, _amount) {
      emit MessageReceived(_spender, _user, _amount, MESSENGER);
    } catch {
      // If the transfer fails, the user could be locked for multiple reasons such as blacklist or usdc being paused
      lockedFundsDetails[_spender][_user] += _amount;
      emit MessageFailed(_spender, _user, _amount, MESSENGER);
    }
  }

  /**
   * @notice Receives a message from L2 if the adapter is deprecated and a user is withdrawing locked funds
   * @dev If the _spender is still locked, the user will be forced to replay this message
   * @param _spender The user that initially provided the tokens
   * @param _amount The amount of tokens to withdraw
   */
  function receiveWithdrawLockedFundsPostMigration(address _spender, uint256 _amount) external onlyLinkedAdapter {
    if (messengerStatus != Status.Deprecated) revert IOpUSDCBridgeAdapter_NotMigrated();

    // If the spender is still locked, the user will be forced to replay this message
    IUSDC(USDC).safeTransfer(_spender, _amount);

    emit LockedFundsWithdrawn(_spender, _amount);
  }

  /**
   * @notice Withdraws the locked funds from the contract in case they get unlocked
   * @param _spender The address that provided the tokens
   * @param _user The user to withdraw the funds for
   */
  function withdrawLockedFunds(address _spender, address _user) external override {
    uint256 _amount = lockedFundsDetails[_spender][_user];
    lockedFundsDetails[_spender][_user] = 0;

    // The check for if the user is locked happens in USDC's contract
    IUSDC(USDC).safeTransfer(_user, _amount);

    emit LockedFundsWithdrawn(_user, _amount);
  }

  /**
   * @notice Attempts to transfer the tokens to the user
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @dev This function should only be called when receiving a message
   * And is a workaround for the fact that try/catch
   * Only works on external calls and SafeERC20 is an internal library
   */
  function attemptTransfer(address _to, uint256 _amount) external {
    if (msg.sender != address(this)) revert IOpUSDCBridgeAdapter_InvalidSender();
    IUSDC(USDC).safeTransfer(_to, _amount);
  }

  /*///////////////////////////////////////////////////////////////
                        INTERNAL FUNCTIONS
  ///////////////////////////////////////////////////////////////*/
  /**
   * @notice Send the message to the linked adapter
   * @param _from address that originated the message
   * @param _to target address on the destination chain
   * @param _amount amount of tokens to be bridged
   * @param _minGasLimit minimum gas limit for the other chain to execute the message
   */
  function _sendMessage(address _from, address _to, uint256 _amount, uint32 _minGasLimit) internal {
    // Transfer the tokens to the contract
    IUSDC(USDC).safeTransferFrom(_from, address(this), _amount);

    // Send the message to the linked adapter
    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER, abi.encodeCall(IOpUSDCBridgeAdapter.receiveMessage, (_to, _from, _amount)), _minGasLimit
    );

    emit MessageSent(_from, _to, _amount, MESSENGER, _minGasLimit);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {ERC1967Proxy} from '@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol';
import {L1OpUSDCBridgeAdapter} from 'contracts/L1OpUSDCBridgeAdapter.sol';
import {IL1OpUSDCFactory} from 'interfaces/IL1OpUSDCFactory.sol';
import {IL2OpUSDCDeploy} from 'interfaces/IL2OpUSDCDeploy.sol';
import {IUSDC} from 'interfaces/external/IUSDC.sol';
import {CrossChainDeployments} from 'libraries/CrossChainDeployments.sol';
import {OpUSDCBridgeAdapter} from 'src/contracts/universal/OpUSDCBridgeAdapter.sol';

/**
 * @title L1OpUSDCFactory
 * @notice Factory contract to deploy and setup the `L1OpUSDCBridgeAdapter` contract on L1, and
 * triggers the deployment of the L2 factory, L2 adapter, and L2 USDC contracts.
 * @dev The salt is always different for each deployed instance of this contract on the L1 Factory, and the L2 contracts
 * are deployed with `CREATE` to guarantee that the addresses are unique among all the L2s, so we avoid a scenario where
 * L2 contracts have the same address on different L2s when triggered by different owners.
 */
contract L1OpUSDCFactory is IL1OpUSDCFactory {
  /// @inheritdoc IL1OpUSDCFactory
  address public constant L2_CREATE2_DEPLOYER = 0x13b0D85CcB8bf860b6b79AF3029fCA081AE9beF2;

  /// @inheritdoc IL1OpUSDCFactory
  string public constant USDC_NAME = 'Bridged USDC';

  /// @inheritdoc IL1OpUSDCFactory
  string public constant USDC_SYMBOL = 'USDC.e';

  /// @notice The selector of the `initialize(string,string,string,uint8,address,address,address,address)` function.
  /// @dev Used to check the first init tx doesn't match it since it is already defined in the L2 factory contract
  bytes4 internal constant _INITIALIZE_SELECTOR = 0x3357162b;

  /// @notice The L2 Adapter proxy is the third of the L2 deployments so at that moment the nonce is 3
  uint256 internal constant _L2_ADAPTER_DEPLOYMENT_NONCE = 3;

  /// @inheritdoc IL1OpUSDCFactory
  IUSDC public immutable USDC;

  /// @inheritdoc IL1OpUSDCFactory
  uint256 public deploymentsSaltCounter;

  /**
   * @notice Constructs the L1 factory contract
   * @param _usdc The address of the USDC contract
   */
  constructor(address _usdc) {
    USDC = IUSDC(_usdc);
  }

  /**
   * @notice Deploys the L1 Adapter, and sends the deployment txs for the L2 factory, L2 adapter and the L2 USDC through
   * the L1 messenger
   * @param _l1Messenger The address of the L1 messenger for the L2 Op chain
   * @param _l1AdapterOwner The address of the owner of the L1 adapter
   * @param _chainName The name of the L2 Op chain
   * @param _l2Deployments The deployments data for the L2 adapter, and the L2 USDC contracts
   * @return _l1Adapter The address of the L1 adapter
   * @return _l2Deploy The address of the L2 deployer contract
   * @return _l2Adapter The address of the L2 adapter
   * @dev It can fail on L2 due to a gas miscalculation, but in that case the tx can be replayed. It only deploys 1 L2
   * factory per L2 deployments, to make sure the nonce is being tracked correctly while precalculating addresses
   * @dev The implementation of the USDC contract needs to be deployed on L2 before this is called
   * Then set the `usdcImplAddr` in the L2Deployments struct to the address of the deployed USDC implementation contract
   *
   * @dev IMPORTANT!!!!
   * The _l2Deployments.usdcInitTxs must be manually entered to correctly initialize the USDC contract on L2.
   * If a function is not included in the init txs, it could lead to potential attack vectors.
   * We currently hardcode the `initialize()` function in the L2 factory contract, to correctly configure the setup
   * You must provide the following init txs:
   * - initalizeV2
   * - initilizeV2_1
   * - initializeV2_2
   *
   * It is also important to note that circle may add more init functions in future implementations
   * This is up to the deployer to check and be sure all init transactions are included
   */
  function deploy(
    address _l1Messenger,
    address _l1AdapterOwner,
    string calldata _chainName,
    L2Deployments calldata _l2Deployments
  ) external returns (address _l1Adapter, address _l2Deploy, address _l2Adapter) {
    // Checks that the first init tx selector is not equal to the `initialize()` function since  we manually
    // Construct this function on the L2 factory contract
    if (bytes4(_l2Deployments.usdcInitTxs[0]) == _INITIALIZE_SELECTOR) revert IL1OpUSDCFactory_NoInitializeTx();

    // Update the salt counter so the L2 factory is deployed with a different salt to a different address and get it
    uint256 _currentNonce = deploymentsSaltCounter += 2;

    // Precalculate the l1 adapter proxy address
    _l1Adapter = CrossChainDeployments.precalculateCreateAddress(address(this), _currentNonce);

    // Get the L1 USDC naming and decimals to ensure they are the same on the L2, guaranteeing the same standard
    IL2OpUSDCDeploy.USDCInitializeData memory _usdcInitializeData = IL2OpUSDCDeploy.USDCInitializeData(
      string.concat(USDC_NAME, ' ', '(', _chainName, ')'), USDC_SYMBOL, USDC.currency(), USDC.decimals()
    );
    // Use the nonce as salt to ensure always a different salt since the nonce is always increasing
    bytes32 _salt = bytes32(_currentNonce);
    // Get the L2 factory init code and precalculate its address
    bytes memory _l2DeployCArgs = abi.encode(
      _l1Adapter,
      _l2Deployments.l2AdapterOwner,
      _l2Deployments.usdcImplAddr,
      _usdcInitializeData,
      _l2Deployments.usdcInitTxs
    );

    // Send the L2 factory deployment tx
    _l2Deploy = CrossChainDeployments.deployL2Factory(
      _l2DeployCArgs, _salt, _l1Messenger, L2_CREATE2_DEPLOYER, _l2Deployments.minGasLimitDeploy
    );

    // Precalculate the L2 adapter address
    _l2Adapter = CrossChainDeployments.precalculateCreateAddress(_l2Deploy, _L2_ADAPTER_DEPLOYMENT_NONCE);

    // Deploy L1 Adapter implementation and proxy, initializing it with the owner
    address _l1AdapterImpl = address(new L1OpUSDCBridgeAdapter(address(USDC), _l1Messenger, _l2Adapter));
    new ERC1967Proxy(_l1AdapterImpl, abi.encodeCall(OpUSDCBridgeAdapter.initialize, _l1AdapterOwner));

    emit ProtocolDeployed(_l1Adapter, _l2Deploy, _l2Adapter);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {SafeERC20} from '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {OpUSDCBridgeAdapter} from 'contracts/universal/OpUSDCBridgeAdapter.sol';
import {FallbackProxyAdmin} from 'contracts/utils/FallbackProxyAdmin.sol';
import {IL1OpUSDCBridgeAdapter} from 'interfaces/IL1OpUSDCBridgeAdapter.sol';
import {IL2OpUSDCBridgeAdapter} from 'interfaces/IL2OpUSDCBridgeAdapter.sol';
import {IOpUSDCBridgeAdapter} from 'interfaces/IOpUSDCBridgeAdapter.sol';
import {ICrossDomainMessenger} from 'interfaces/external/ICrossDomainMessenger.sol';
import {IUSDC} from 'interfaces/external/IUSDC.sol';

/**
 * @title L2OpUSDCBridgeAdapter
 * @notice L2OpUSDCBridgeAdapter is a contract that bridges Bridged USDC from L2 to L1 and and receives the it from L1.
 * It finalizes the migration process of bridged USDC to native USDC on L2 after being triggered by the L1 adapter, and
 * sends the amount to be burned back to the L1 adapter to finish the migration process.
 * @dev The owner of this contract is capable of calling any USDC function, except the ownership or admin ones.
 */
contract L2OpUSDCBridgeAdapter is IL2OpUSDCBridgeAdapter, OpUSDCBridgeAdapter {
  using SafeERC20 for IUSDC;

  ///@notice `transferOwnership(address)` USDC function selector
  bytes4 internal constant _TRANSFER_OWNERSHIP_SELECTOR = 0xf2fde38b;
  ///@notice `changeAdmin(address)` USDC function selector
  bytes4 internal constant _CHANGE_ADMIN_SELECTOR = 0x8f283970;
  ///@notice `upgradeTo(address)` USDC function selector
  bytes4 internal constant _UPGRADE_TO_SELECTOR = 0x3659cfe6;
  ///@notice `upgradeToAndCall(address,bytes)` USDC function selector
  bytes4 internal constant _UPGRADE_TO_AND_CALL_SELECTOR = 0x4f1ef286;
  ///@notice `updateMasterMinter(address)` USDC function selector
  bytes4 internal constant _UPDATE_MASTER_MINTER_SELECTOR = 0xaa20e1e4;

  /// @inheritdoc IL2OpUSDCBridgeAdapter
  // solhint-disable-next-line var-name-mixedcase
  FallbackProxyAdmin public FALLBACK_PROXY_ADMIN;

  /// @inheritdoc IL2OpUSDCBridgeAdapter
  address public roleCaller;

  /// @notice Reserve 50 more storage slots to be safe on future upgrades
  uint256[50] private __gap;

  /**
   * @notice Construct the OpUSDCBridgeAdapter contract
   * @param _usdc The address of the USDC Contract to be used by the adapter
   * @param _messenger The address of the messenger contract
   * @param _linkedAdapter The address of the linked adapter
   * @dev The constructor is only used to initialize the OpUSDCBridgeAdapter immutable variables
   */
  /* solhint-disable no-unused-vars */
  constructor(
    address _usdc,
    address _messenger,
    address _linkedAdapter
  ) OpUSDCBridgeAdapter(_usdc, _messenger, _linkedAdapter) {}
  /* solhint-enable no-unused-vars */

  /**
   * @notice Sets the owner of the contract
   * @param _owner The address of the owner
   * @dev This function needs only used during the deployment of the proxy contract, and it is disabled for the
   * implementation contract
   */
  function initialize(address _owner) external virtual override initializer {
    __Ownable_init(_owner);
    string memory _name = 'OpUSDCBridgeAdapter';
    string memory _version = '1.0.0';
    __EIP712_init(_name, _version);
    FALLBACK_PROXY_ADMIN = new FallbackProxyAdmin(USDC);
  }

  /*///////////////////////////////////////////////////////////////
                              MIGRATION
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Initiates the process to migrate the bridged USDC to native USDC
   * @dev Full migration can't finish until L1 receives the message for setting the burn amount
   * @param _roleCaller The address that will be allowed to transfer the USDC roles
   * @param _setBurnAmountMinGasLimit Minimum gas limit that the setBurnAmount message can be executed on L1
   */
  function receiveMigrateToNative(address _roleCaller, uint32 _setBurnAmountMinGasLimit) external onlyLinkedAdapter {
    messengerStatus = Status.Deprecated;
    roleCaller = _roleCaller;

    uint256 _burnAmount = IUSDC(USDC).totalSupply();

    // Remove the L2 Adapter as a minter
    IUSDC(USDC).removeMinter(address(this));

    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER, abi.encodeCall(IL1OpUSDCBridgeAdapter.setBurnAmount, (_burnAmount)), _setBurnAmountMinGasLimit
    );

    emit MigratingToNative(MESSENGER, _roleCaller);
  }

  /**
   * @notice Transfers the USDC roles to the new owner
   * @param _owner The address to transfer ownership to
   * @dev Can only be called by the role caller set in the migration process
   */
  function transferUSDCRoles(address _owner) external {
    if (msg.sender != roleCaller) revert IOpUSDCBridgeAdapter_InvalidCaller();

    // Transfer ownership of the USDC contract to circle
    IUSDC(USDC).transferOwnership(_owner);

    // Transfer proxy admin ownership to the caller
    FALLBACK_PROXY_ADMIN.changeAdmin(msg.sender);
  }

  /*///////////////////////////////////////////////////////////////
                          MESSAGING CONTROL
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Receive the stop messaging message from the linked adapter and stop outgoing messages
   */
  function receiveStopMessaging() external onlyLinkedAdapter {
    if (messengerStatus == Status.Deprecated) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    messengerStatus = Status.Paused;

    emit MessagingStopped(MESSENGER);
  }

  /**
   * @notice Resume messaging after it was stopped
   */
  function receiveResumeMessaging() external onlyLinkedAdapter {
    if (messengerStatus == Status.Deprecated) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    messengerStatus = Status.Active;

    emit MessagingResumed(MESSENGER);
  }

  /*///////////////////////////////////////////////////////////////
                             MESSAGING
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Send tokens to another chain through the linked adapter
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(address _to, uint256 _amount, uint32 _minGasLimit) external override {
    if (_to == address(0)) revert IOpUSDCBridgeAdapter_InvalidAddress();
    // Ensure the address is not blacklisted
    if (IUSDC(USDC).isBlacklisted(_to)) revert IOpUSDCBridgeAdapter_BlacklistedAddress();

    // Ensure messaging is enabled
    if (messengerStatus != Status.Active) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    _sendMessage(msg.sender, _to, _amount, _minGasLimit);
  }

  /**
   * @notice Send signer tokens to another chain through the linked adapter
   * @param _signer The address of the user sending the message
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _signature The signature of the user
   * @param _nonce The nonce of the user
   * @param _deadline The deadline for the message to be executed
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(
    address _signer,
    address _to,
    uint256 _amount,
    bytes calldata _signature,
    uint256 _nonce,
    uint256 _deadline,
    uint32 _minGasLimit
  ) external override {
    if (_to == address(0)) revert IOpUSDCBridgeAdapter_InvalidAddress();
    // Ensure the address is not blacklisted
    if (IUSDC(USDC).isBlacklisted(_to)) revert IOpUSDCBridgeAdapter_BlacklistedAddress();

    // Ensure messaging is enabled
    if (messengerStatus != Status.Active) revert IOpUSDCBridgeAdapter_MessagingDisabled();

    // Ensure the nonce has not already been used
    if (userNonces[_signer][_nonce]) revert IOpUSDCBridgeAdapter_InvalidNonce();

    // Ensure the deadline has not passed
    if (block.timestamp > _deadline) revert IOpUSDCBridgeAdapter_MessageExpired();

    BridgeMessage memory _message =
      BridgeMessage({to: _to, amount: _amount, deadline: _deadline, nonce: _nonce, minGasLimit: _minGasLimit});

    _checkSignature(_signer, _hashMessageStruct(_message), _signature);

    // Mark the nonce as used
    userNonces[_signer][_nonce] = true;

    _sendMessage(_signer, _to, _amount, _minGasLimit);
  }

  /**
   * @notice Receive the message from the other chain and mint the bridged representation for the user
   * @dev This function should only be called when receiving a message to mint the bridged representation
   * @dev If the mint fails the funds might be recovered by calling withdrawLockedFunds
   * @param _user The user to mint the bridged representation for
   * @param _spender The address that provided the tokens
   * @param _amount The amount of tokens to mint
   */
  function receiveMessage(address _user, address _spender, uint256 _amount) external override onlyLinkedAdapter {
    if (messengerStatus == Status.Deprecated) {
      uint32 _minGasLimit = 150_000;
      // Return the funds to the spender in case the target on L2 is a contract that can´t handle the funds on L1
      ICrossDomainMessenger(MESSENGER).sendMessage(
        LINKED_ADAPTER, abi.encodeCall(IOpUSDCBridgeAdapter.receiveMessage, (_spender, _spender, _amount)), _minGasLimit
      );

      emit ReplayedFundsSentBackToL1(_spender, _amount);
    } else {
      // Mint the tokens to the user
      try IUSDC(USDC).mint(_user, _amount) {
        emit MessageReceived(_spender, _user, _amount, MESSENGER);
      } catch {
        // If the mint fails, the user could be locked for multiple reasons such as blacklist or usdc being paused
        lockedFundsDetails[_spender][_user] += _amount;
        emit MessageFailed(_spender, _user, _amount, MESSENGER);
      }
    }
  }

  /**
   * @notice Mints the locked funds from the contract in case they get unlocked
   * @dev Returns the funds to the spender through a message to L1 if the contract is deprecated
   * @param _spender The address that provided the tokens
   * @param _user The user to withdraw the funds for
   */
  function withdrawLockedFunds(address _spender, address _user) external override {
    uint256 _amount = lockedFundsDetails[_spender][_user];
    lockedFundsDetails[_spender][_user] = 0;

    if (messengerStatus != Status.Deprecated) {
      // The check for if the user is blacklisted happens in USDC's contract
      IUSDC(USDC).mint(_user, _amount);
      emit LockedFundsWithdrawn(_user, _amount);
    } else {
      uint32 _minGasLimit = 150_000;
      // Send the message to the linked adapter
      ICrossDomainMessenger(MESSENGER).sendMessage(
        LINKED_ADAPTER,
        abi.encodeCall(IL1OpUSDCBridgeAdapter.receiveWithdrawLockedFundsPostMigration, (_spender, _amount)),
        _minGasLimit
      );
      emit LockedFundsSentBackToL1(_spender, _amount);
    }
  }

  /*///////////////////////////////////////////////////////////////
                        BRIDGED USDC FUNCTIONS
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Call with abitrary calldata on USDC contract.
   * @dev can't execute the following list of transactions:
   *  • transferOwnership (0xf2fde38b)
   *  • changeAdmin (0x8f283970)
   * @dev UpgradeTo and UpgradeToAndCall go through the fallback admin
   * @param _data The calldata to execute on the USDC contract
   */
  function callUsdcTransaction(bytes calldata _data) external onlyOwner {
    bytes4 _selector = bytes4(_data);
    bool _success;

    if (
      _selector == _TRANSFER_OWNERSHIP_SELECTOR || _selector == _CHANGE_ADMIN_SELECTOR
        || _selector == _UPDATE_MASTER_MINTER_SELECTOR
    ) {
      revert IOpUSDCBridgeAdapter_ForbiddenTransaction();
    } else if (_selector == _UPGRADE_TO_SELECTOR || _selector == _UPGRADE_TO_AND_CALL_SELECTOR) {
      (_success,) = address(FALLBACK_PROXY_ADMIN).call(_data);
    } else {
      (_success,) = USDC.call(_data);
    }

    if (!_success) {
      revert IOpUSDCBridgeAdapter_InvalidTransaction();
    }

    emit USDCFunctionSent(_selector);
  }

  /*///////////////////////////////////////////////////////////////
                        INTERNAL FUNCTIONS
  ///////////////////////////////////////////////////////////////*/
  /**
   * @notice Send the message to the linked adapter
   * @param _from address that originated the message
   * @param _to target address on the destination chain
   * @param _amount amount of tokens to be bridged
   * @param _minGasLimit minimum gas limit for the other chain to execute the message
   */
  function _sendMessage(address _from, address _to, uint256 _amount, uint32 _minGasLimit) internal {
    IUSDC(USDC).safeTransferFrom(_from, address(this), _amount);

    // Burn the tokens
    IUSDC(USDC).burn(_amount);

    // Send the message to the linked adapter
    ICrossDomainMessenger(MESSENGER).sendMessage(
      LINKED_ADAPTER, abi.encodeCall(IOpUSDCBridgeAdapter.receiveMessage, (_to, _from, _amount)), _minGasLimit
    );

    emit MessageSent(_from, _to, _amount, MESSENGER, _minGasLimit);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {ERC1967Proxy} from '@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol';
import {L2OpUSDCBridgeAdapter} from 'contracts/L2OpUSDCBridgeAdapter.sol';
import {USDC_PROXY_CREATION_CODE} from 'contracts/utils/USDCProxyCreationCode.sol';
import {IL2OpUSDCDeploy} from 'interfaces/IL2OpUSDCDeploy.sol';
import {IUSDC} from 'interfaces/external/IUSDC.sol';
import {OpUSDCBridgeAdapter} from 'src/contracts/universal/OpUSDCBridgeAdapter.sol';

/**
 * @title L2OpUSDCDeploy
 * @notice Deployer contract for deploying the L2 USDC implementation, proxy, and `L2OpUSDCBridgeAdapter` contract,
 * all at once on the `deploy` function.
 * @dev The salt is always different for each deployed instance of this contract on the L1 Factory, and the L2 contracts
 * are deployed with `CREATE` to guarantee that the addresses are unique among all the L2s, so we avoid a scenario where
 * L2 contracts have the same address on different L2s when triggered by different owners.
 */
contract L2OpUSDCDeploy is IL2OpUSDCDeploy {
  address internal constant _L2_MESSENGER = 0x4200000000000000000000000000000000000007;

  /**
   * @notice Deploys the USDC implementation, proxy, and L2 adapter contracts all at once, and then initializes the USDC
   * @param _l1Adapter The address of the L1 adapter contract
   * @param _l2AdapterOwner The address of the L2 adapter owner
   * @param _usdcImplAddr The address of the USDC implementation on L2 to connect the proxy to
   * @param _usdcInitializeData The USDC name, symbol, currency, and decimals used on the first `initialize()` call
   * @param _usdcInitTxs The initialization transactions for the USDC proxy and implementation contracts
   * @dev The USDC proxy owner needs to be set on the first init tx, and will be set to the L2 adapter address
   * @dev Using `CREATE` to guarantee that the addresses are unique among all the L2s
   */
  constructor(
    address _l1Adapter,
    address _l2AdapterOwner,
    address _usdcImplAddr,
    USDCInitializeData memory _usdcInitializeData,
    bytes[] memory _usdcInitTxs
  ) {
    // Deploy USDC proxy
    bytes memory _usdcProxyCArgs = abi.encode(_usdcImplAddr);
    bytes memory _usdcProxyInitCode = bytes.concat(USDC_PROXY_CREATION_CODE, _usdcProxyCArgs);

    // 1st nonce
    address _usdcProxy = _deployCreate(_usdcProxyInitCode);
    emit USDCProxyDeployed(_usdcProxy);

    // Deploy L2 Adapter implementation and proxy, initializing it with the owner
    // 2nd nonce
    address _l2AdapterImpl = address(new L2OpUSDCBridgeAdapter(_usdcProxy, _L2_MESSENGER, _l1Adapter));

    // 3rd nonce
    address _l2Adapter =
      address(new ERC1967Proxy(_l2AdapterImpl, abi.encodeCall(OpUSDCBridgeAdapter.initialize, _l2AdapterOwner)));
    emit L2AdapterDeployed(_l2Adapter);

    // Deploy the FallbackProxyAdmin internally in the L2 Adapter to keep it unique
    address _fallbackProxyAdmin = address(L2OpUSDCBridgeAdapter(_l2Adapter).FALLBACK_PROXY_ADMIN());
    // Change the USDC admin so the init txs can be executed over the proxy from this contract
    IUSDC(_usdcProxy).changeAdmin(_fallbackProxyAdmin);

    // Execute the USDC initialization transactions over the USDC proxy
    _executeInitTxs(_usdcProxy, _usdcInitializeData, _l2Adapter, _usdcInitTxs);
  }

  /**
   * @notice Executes the initialization transactions for a target contract
   * @param _usdc The address of the contract to execute the transactions on
   * @param _usdcInitializeData The USDC name, symbol, currency, and decimals used on the first `initialize()` call
   * @param _l2Adapter The address of the L2 adapter
   * @param _initTxs The initialization transactions to execute
   * @dev The first `initialize()` call is defined here to ensure it is properly done, granting the right permissions
   * to the L2 adapter contract. The L2 factory is set as master minter first so it can configure the l2 adapter as
   * unlimited minter and then the master minter is updated again to the l2 adapter
   */
  function _executeInitTxs(
    address _usdc,
    USDCInitializeData memory _usdcInitializeData,
    address _l2Adapter,
    bytes[] memory _initTxs
  ) internal {
    // Initialize the USDC contract
    IUSDC(_usdc).initialize(
      _usdcInitializeData.tokenName,
      _usdcInitializeData.tokenSymbol,
      _usdcInitializeData.tokenCurrency,
      _usdcInitializeData.tokenDecimals,
      address(this),
      _l2Adapter,
      _l2Adapter,
      address(this)
    );

    // Add l2 adapter as unlimited minter
    IUSDC(_usdc).configureMinter(_l2Adapter, type(uint256).max);
    // Set l2 adapter as new master minter
    IUSDC(_usdc).updateMasterMinter(_l2Adapter);
    // Transfer USDC ownership to the L2 adapter
    IUSDC(_usdc).transferOwnership(_l2Adapter);

    // Execute the input init txs, use `_i+1` as revert argument since the first tx is already executed on the contract
    for (uint256 _i; _i < _initTxs.length; _i++) {
      (bool _success,) = _usdc.call(_initTxs[_i]);
      if (!_success) {
        revert IL2OpUSDCDeploy_InitializationFailed(_i + 1);
      }
    }
  }

  /**
   * @notice Deploys a new contract via calling the `CREATE` opcode
   * @param _initCode The creation bytecode.
   * @return _newContract The 20-byte address where the contract was deployed.
   */
  function _deployCreate(bytes memory _initCode) internal returns (address _newContract) {
    assembly ("memory-safe") {
      _newContract := create(0x0, add(_initCode, 0x20), mload(_initCode))
    }
    if (_newContract == address(0) || _newContract.code.length == 0) {
      revert IL2OpUSDCDeploy_DeploymentFailed();
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

import {OwnableUpgradeable} from '@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol';
import {UUPSUpgradeable} from '@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol';
import {EIP712Upgradeable} from '@openzeppelin/contracts-upgradeable/utils/cryptography/EIP712Upgradeable.sol';
import {MessageHashUtils} from '@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol';
import {SignatureChecker} from '@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol';
import {IOpUSDCBridgeAdapter} from 'interfaces/IOpUSDCBridgeAdapter.sol';
import {ICrossDomainMessenger} from 'interfaces/external/ICrossDomainMessenger.sol';

abstract contract OpUSDCBridgeAdapter is UUPSUpgradeable, OwnableUpgradeable, EIP712Upgradeable, IOpUSDCBridgeAdapter {
  using MessageHashUtils for bytes32;
  using SignatureChecker for address;

  /// @notice The typehash for the bridge message
  bytes32 public constant BRIDGE_MESSAGE_TYPEHASH =
    keccak256('BridgeMessage(address to,uint256 amount,uint256 deadline,uint256 nonce,uint32 minGasLimit)');

  /// @inheritdoc IOpUSDCBridgeAdapter
  address public immutable USDC;

  /// @inheritdoc IOpUSDCBridgeAdapter
  address public immutable LINKED_ADAPTER;

  /// @inheritdoc IOpUSDCBridgeAdapter
  address public immutable MESSENGER;

  /// @inheritdoc IOpUSDCBridgeAdapter
  Status public messengerStatus;

  /// @inheritdoc IOpUSDCBridgeAdapter
  mapping(address _user => mapping(uint256 _nonce => bool _used)) public userNonces;

  /// @inheritdoc IOpUSDCBridgeAdapter
  mapping(address _spender => mapping(address _user => uint256 _lockedAmount)) public lockedFundsDetails;

  /// @notice Reserve 50 storage slots to be safe on future upgrades
  uint256[50] private __gap;

  /**
   * @notice Modifier to check if the sender is the linked adapter through the messenger
   */
  modifier onlyLinkedAdapter() {
    if (msg.sender != MESSENGER || ICrossDomainMessenger(MESSENGER).xDomainMessageSender() != LINKED_ADAPTER) {
      revert IOpUSDCBridgeAdapter_InvalidSender();
    }
    _;
  }

  /**
   * @notice Construct the OpUSDCBridgeAdapter contract
   * @param _usdc The address of the USDC Contract to be used by the adapter
   * @param _messenger The address of the messenger contract
   * @param _linkedAdapter The address of the linked adapter
   */
  // solhint-disable-next-line no-unused-vars
  constructor(address _usdc, address _messenger, address _linkedAdapter) {
    USDC = _usdc;
    MESSENGER = _messenger;
    LINKED_ADAPTER = _linkedAdapter;
    _disableInitializers();
  }

  /**
   * @notice Initialize the contract
   * @param _owner The owner of the contract
   */
  function initialize(address _owner) external virtual initializer {}

  /*///////////////////////////////////////////////////////////////
                             MESSAGING
  ///////////////////////////////////////////////////////////////*/

  /**
   * @notice Send tokens to another chain through the linked adapter
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(address _to, uint256 _amount, uint32 _minGasLimit) external virtual;

  /**
   * @notice Send signer tokens to another chain through the linked adapter
   * @param _signer The address of the user sending the message
   * @param _to The target address on the destination chain
   * @param _amount The amount of tokens to send
   * @param _signature The signature of the user
   * @param _nonce The nonce of the user
   * @param _deadline The deadline for the message to be executed
   * @param _minGasLimit Minimum gas limit that the message can be executed with
   */
  function sendMessage(
    address _signer,
    address _to,
    uint256 _amount,
    bytes calldata _signature,
    uint256 _nonce,
    uint256 _deadline,
    uint32 _minGasLimit
  ) external virtual;

  /**
   * @notice Receive the message from the other chain and mint or transfer tokens to the user
   * @dev This function should only be called when receiving a message to mint or transfer tokens
   * @param _user The user to mint or transfer the tokens for
   * @param _spender The address that provided the tokens
   * @param _amount The amount of tokens to transfer or mint
   */
  function receiveMessage(address _user, address _spender, uint256 _amount) external virtual;

  /**
   * @notice Withdraws the locked funds from the contract if they get unlocked
   * @param _spender The address that provided the tokens
   * @param _user The user to withdraw the funds for
   */
  function withdrawLockedFunds(address _spender, address _user) external virtual;

  /**
   * @notice Cancels a signature by setting the nonce as used
   * @param _nonce The nonce of the signature to cancel
   */
  function cancelSignature(uint256 _nonce) external {
    userNonces[msg.sender][_nonce] = true;

    emit NonceCanceled(msg.sender, _nonce);
  }

  /**
   * @notice Checks the caller is the owner to authorize the upgrade
   */
  function _authorizeUpgrade(address) internal virtual override onlyOwner {}

  /**
   * @notice Check the signature of a message
   * @param _signer the address that signed the message
   * @param _messageHash the hash of the message that was signed
   * @param _signature the signature of the message
   */
  function _checkSignature(address _signer, bytes32 _messageHash, bytes memory _signature) internal view {
    // Uses the EIP712Upgradeable typed data hash
    _messageHash = _hashTypedDataV4(_messageHash);

    if (!_signer.isValidSignatureNow(_messageHash, _signature)) revert IOpUSDCBridgeAdapter_InvalidSignature();
  }

  /**
   * @notice Hashes the bridge message struct
   * @param _message The bridge message struct to hash
   * @return _hash The hash of the bridge message struct
   */
  function _hashMessageStruct(BridgeMessage memory _message) internal pure returns (bytes32 _hash) {
    _hash = keccak256(
      abi.encode(
        BRIDGE_MESSAGE_TYPEHASH, _message.to, _message.amount, _message.deadline, _message.nonce, _message.minGasLimit
      )
    );
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/Proxy.sol)

pragma solidity ^0.8.20;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback
     * function and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/SignatureChecker.sol)

pragma solidity ^0.8.20;

import {ECDSA} from "./ECDSA.sol";
import {IERC1271} from "../../interfaces/IERC1271.sol";

/**
 * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like
 * Argent and Safe Wallet (previously Gnosis Safe).
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {
        (address recovered, ECDSA.RecoverError error, ) = ECDSA.tryRecover(hash, signature);
        return
            (error == ECDSA.RecoverError.NoError && recovered == signer) ||
            isValidERC1271SignatureNow(signer, hash, signature);
    }

    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 hash,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeCall(IERC1271.isValidSignature, (hash, signature))
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) == bytes32(IERC1271.isValidSignature.selector));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

// Native USDC proxy contract bytecode on mainnet:
// https://optimistic.etherscan.io/token/0x0b2c639c533813f4aa9d7837caf62653d097ff85#code
bytes constant USDC_PROXY_CREATION_CODE =
// solhint-disable-next-line max-line-length
  hex'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';

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/UUPSUpgradeable.sol)

pragma solidity ^0.8.20;

import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol";
import {Initializable} from "./Initializable.sol";

/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);

    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";

    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();

    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);

    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }

    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }

    function __UUPSUpgradeable_init() internal onlyInitializing {
    }

    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967Utils.IMPLEMENTATION_SLOT;
    }

    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }

    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC1967-compliant implementation pointing to self.
     * See {_onlyProxy}.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967Utils.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

{
  "compilationTarget": {
    "src/contracts/L1OpUSDCFactory.sol": "L1OpUSDCFactory"
  },
  "evmVersion": "paris",
  "libraries": {
    "src/libraries/CrossChainDeployments.sol:CrossChainDeployments": "0xf208a8fe1ef2b31b0e408c7399a5d696cadb0be9"
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":contracts/=src/contracts/",
    ":ds-test/=node_modules/ds-test/src/",
    ":forge-std/=node_modules/forge-std/src/",
    ":halmos-cheatcodes/=node_modules/halmos-cheatcodes/src/",
    ":interfaces/=src/interfaces/",
    ":libraries/=src/libraries/",
    ":solhint/=node_modules/solhint/"
  ],
  "viaIR": true
}