// SPDX-License-Identifier: MIT OR Apache-2.0
// Sources flattened with hardhat v2.16.1 https://hardhat.org
// File @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Internal function that returns the initialized version. Returns `_initialized`
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Internal function that returns the initialized version. Returns `_initializing`
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// File @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// File @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// File @openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// File @openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[45] private __gap;
}
// File @openzeppelin/contracts-upgradeable/utils/introspection/IERC165Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/IERC721Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/extensions/IERC721MetadataUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/IERC721ReceiverUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721ReceiverUpgradeable {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal onlyInitializing {
}
function __ERC165_init_unchained() internal onlyInitializing {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// File @openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library MathUpgradeable {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// File @openzeppelin/contracts-upgradeable/utils/StringsUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library StringsUpgradeable {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = MathUpgradeable.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, MathUpgradeable.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {
using AddressUpgradeable for address;
using StringsUpgradeable for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC721_init_unchained(name_, symbol_);
}
function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
return
interfaceId == type(IERC721Upgradeable).interfaceId ||
interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _ownerOf(tokenId);
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721Upgradeable.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721Upgradeable.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, 1);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721Upgradeable.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = ERC721Upgradeable.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721Upgradeable.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, 1);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(ERC721Upgradeable.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
* - When `from` is zero, the tokens will be minted for `to`.
* - When `to` is zero, ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256, /* firstTokenId */
uint256 batchSize
) internal virtual {
if (batchSize > 1) {
if (from != address(0)) {
_balances[from] -= batchSize;
}
if (to != address(0)) {
_balances[to] += batchSize;
}
}
}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[44] private __gap;
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/extensions/IERC721EnumerableUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721EnumerableUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721EnumerableUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721EnumerableUpgradeable is Initializable, ERC721Upgradeable, IERC721EnumerableUpgradeable {
function __ERC721Enumerable_init() internal onlyInitializing {
}
function __ERC721Enumerable_init_unchained() internal onlyInitializing {
}
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165Upgradeable, ERC721Upgradeable) returns (bool) {
return interfaceId == type(IERC721EnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Upgradeable.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721EnumerableUpgradeable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual override {
super._beforeTokenTransfer(from, to, firstTokenId, batchSize);
if (batchSize > 1) {
// Will only trigger during construction. Batch transferring (minting) is not available afterwards.
revert("ERC721Enumerable: consecutive transfers not supported");
}
uint256 tokenId = firstTokenId;
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721Upgradeable.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721Upgradeable.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[46] private __gap;
}
// File @openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721URIStorageUpgradeable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/extensions/ERC721URIStorage.sol)
pragma solidity ^0.8.0;
/**
* @dev ERC721 token with storage based token URI management.
*/
abstract contract ERC721URIStorageUpgradeable is Initializable, ERC721Upgradeable {
function __ERC721URIStorage_init() internal onlyInitializing {
}
function __ERC721URIStorage_init_unchained() internal onlyInitializing {
}
using StringsUpgradeable for uint256;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
return super.tokenURI(tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev See {ERC721-_burn}. This override additionally checks to see if a
* token-specific URI was set for the token, and if so, it deletes the token URI from
* the storage mapping.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// File @openzeppelin/contracts/access/IAccessControl.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// File @openzeppelin/contracts/utils/Context.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/utils/introspection/ERC165.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/utils/math/Math.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// File @openzeppelin/contracts/utils/Strings.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File @openzeppelin/contracts/access/AccessControl.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `_msgSender()` is missing `role`.
* Overriding this function changes the behavior of the {onlyRole} modifier.
*
* Format of the revert message is described in {_checkRole}.
*
* _Available since v4.6._
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(account),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleGranted} event.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleRevoked} event.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*
* May emit a {RoleRevoked} event.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* May emit a {RoleGranted} event.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleGranted} event.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleRevoked} event.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/crosschain/errors.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (crosschain/errors.sol)
pragma solidity ^0.8.4;
error NotCrossChainCall();
error InvalidCrossChainSender(address actual, address expected);
// File @openzeppelin/contracts/crosschain/CrossChainEnabled.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (crosschain/CrossChainEnabled.sol)
pragma solidity ^0.8.4;
/**
* @dev Provides information for building cross-chain aware contracts. This
* abstract contract provides accessors and modifiers to control the execution
* flow when receiving cross-chain messages.
*
* Actual implementations of cross-chain aware contracts, which are based on
* this abstraction, will have to inherit from a bridge-specific
* specialization. Such specializations are provided under
* `crosschain/<chain>/CrossChainEnabled<chain>.sol`.
*
* _Available since v4.6._
*/
abstract contract CrossChainEnabled {
/**
* @dev Throws if the current function call is not the result of a
* cross-chain execution.
*/
modifier onlyCrossChain() {
if (!_isCrossChain()) revert NotCrossChainCall();
_;
}
/**
* @dev Throws if the current function call is not the result of a
* cross-chain execution initiated by `account`.
*/
modifier onlyCrossChainSender(address expected) {
address actual = _crossChainSender();
if (expected != actual) revert InvalidCrossChainSender(actual, expected);
_;
}
/**
* @dev Returns whether the current function call is the result of a
* cross-chain message.
*/
function _isCrossChain() internal view virtual returns (bool);
/**
* @dev Returns the address of the sender of the cross-chain message that
* triggered the current function call.
*
* IMPORTANT: Should revert with `NotCrossChainCall` if the current function
* call is not the result of a cross-chain message.
*/
function _crossChainSender() internal view virtual returns (address);
}
// File @openzeppelin/contracts/crosschain/optimism/LibOptimism.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (crosschain/optimism/LibOptimism.sol)
pragma solidity ^0.8.4;
/**
* @dev Primitives for cross-chain aware contracts for https://www.optimism.io/[Optimism].
* See the https://community.optimism.io/docs/developers/bridge/messaging/#accessing-msg-sender[documentation]
* for the functionality used here.
*/
library LibOptimism {
/**
* @dev Returns whether the current function call is the result of a
* cross-chain message relayed by `messenger`.
*/
function isCrossChain(address messenger) internal view returns (bool) {
return msg.sender == messenger;
}
/**
* @dev Returns the address of the sender that triggered the current
* cross-chain message through `messenger`.
*
* NOTE: {isCrossChain} should be checked before trying to recover the
* sender, as it will revert with `NotCrossChainCall` if the current
* function call is not the result of a cross-chain message.
*/
function crossChainSender(address messenger) internal view returns (address) {
if (!isCrossChain(messenger)) revert NotCrossChainCall();
return ICrossDomainMessenger(messenger).xDomainMessageSender();
}
}
// File @openzeppelin/contracts/crosschain/optimism/CrossChainEnabledOptimism.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (crosschain/optimism/CrossChainEnabledOptimism.sol)
pragma solidity ^0.8.4;
/**
* @dev https://www.optimism.io/[Optimism] specialization or the
* {CrossChainEnabled} abstraction.
*
* The messenger (`CrossDomainMessenger`) contract is provided and maintained by
* the optimism team. You can find the address of this contract on mainnet and
* kovan in the https://github.com/ethereum-optimism/optimism/tree/develop/packages/contracts/deployments[deployments section of Optimism monorepo].
*
* _Available since v4.6._
*/
abstract contract CrossChainEnabledOptimism is CrossChainEnabled {
/// @custom:oz-upgrades-unsafe-allow state-variable-immutable
address private immutable _messenger;
/// @custom:oz-upgrades-unsafe-allow constructor
constructor(address messenger) {
_messenger = messenger;
}
/**
* @dev see {CrossChainEnabled-_isCrossChain}
*/
function _isCrossChain() internal view virtual override returns (bool) {
return LibOptimism.isCrossChain(_messenger);
}
/**
* @dev see {CrossChainEnabled-_crossChainSender}
*/
function _crossChainSender() internal view virtual override onlyCrossChain returns (address) {
return LibOptimism.crossChainSender(_messenger);
}
}
// File @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/utils/Address.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File @openzeppelin/contracts/governance/TimelockController.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (governance/TimelockController.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which acts as a timelocked controller. When set as the
* owner of an `Ownable` smart contract, it enforces a timelock on all
* `onlyOwner` maintenance operations. This gives time for users of the
* controlled contract to exit before a potentially dangerous maintenance
* operation is applied.
*
* By default, this contract is self administered, meaning administration tasks
* have to go through the timelock process. The proposer (resp executor) role
* is in charge of proposing (resp executing) operations. A common use case is
* to position this {TimelockController} as the owner of a smart contract, with
* a multisig or a DAO as the sole proposer.
*
* _Available since v3.3._
*/
contract TimelockController is AccessControl, IERC721Receiver, IERC1155Receiver {
bytes32 public constant TIMELOCK_ADMIN_ROLE = keccak256("TIMELOCK_ADMIN_ROLE");
bytes32 public constant PROPOSER_ROLE = keccak256("PROPOSER_ROLE");
bytes32 public constant EXECUTOR_ROLE = keccak256("EXECUTOR_ROLE");
bytes32 public constant CANCELLER_ROLE = keccak256("CANCELLER_ROLE");
uint256 internal constant _DONE_TIMESTAMP = uint256(1);
mapping(bytes32 => uint256) private _timestamps;
uint256 private _minDelay;
/**
* @dev Emitted when a call is scheduled as part of operation `id`.
*/
event CallScheduled(
bytes32 indexed id,
uint256 indexed index,
address target,
uint256 value,
bytes data,
bytes32 predecessor,
uint256 delay
);
/**
* @dev Emitted when a call is performed as part of operation `id`.
*/
event CallExecuted(bytes32 indexed id, uint256 indexed index, address target, uint256 value, bytes data);
/**
* @dev Emitted when operation `id` is cancelled.
*/
event Cancelled(bytes32 indexed id);
/**
* @dev Emitted when the minimum delay for future operations is modified.
*/
event MinDelayChange(uint256 oldDuration, uint256 newDuration);
/**
* @dev Initializes the contract with the following parameters:
*
* - `minDelay`: initial minimum delay for operations
* - `proposers`: accounts to be granted proposer and canceller roles
* - `executors`: accounts to be granted executor role
* - `admin`: optional account to be granted admin role; disable with zero address
*
* IMPORTANT: The optional admin can aid with initial configuration of roles after deployment
* without being subject to delay, but this role should be subsequently renounced in favor of
* administration through timelocked proposals. Previous versions of this contract would assign
* this admin to the deployer automatically and should be renounced as well.
*/
constructor(
uint256 minDelay,
address[] memory proposers,
address[] memory executors,
address admin
) {
_setRoleAdmin(TIMELOCK_ADMIN_ROLE, TIMELOCK_ADMIN_ROLE);
_setRoleAdmin(PROPOSER_ROLE, TIMELOCK_ADMIN_ROLE);
_setRoleAdmin(EXECUTOR_ROLE, TIMELOCK_ADMIN_ROLE);
_setRoleAdmin(CANCELLER_ROLE, TIMELOCK_ADMIN_ROLE);
// self administration
_setupRole(TIMELOCK_ADMIN_ROLE, address(this));
// optional admin
if (admin != address(0)) {
_setupRole(TIMELOCK_ADMIN_ROLE, admin);
}
// register proposers and cancellers
for (uint256 i = 0; i < proposers.length; ++i) {
_setupRole(PROPOSER_ROLE, proposers[i]);
_setupRole(CANCELLER_ROLE, proposers[i]);
}
// register executors
for (uint256 i = 0; i < executors.length; ++i) {
_setupRole(EXECUTOR_ROLE, executors[i]);
}
_minDelay = minDelay;
emit MinDelayChange(0, minDelay);
}
/**
* @dev Modifier to make a function callable only by a certain role. In
* addition to checking the sender's role, `address(0)` 's role is also
* considered. Granting a role to `address(0)` is equivalent to enabling
* this role for everyone.
*/
modifier onlyRoleOrOpenRole(bytes32 role) {
if (!hasRole(role, address(0))) {
_checkRole(role, _msgSender());
}
_;
}
/**
* @dev Contract might receive/hold ETH as part of the maintenance process.
*/
receive() external payable {}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, AccessControl) returns (bool) {
return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns whether an id correspond to a registered operation. This
* includes both Pending, Ready and Done operations.
*/
function isOperation(bytes32 id) public view virtual returns (bool registered) {
return getTimestamp(id) > 0;
}
/**
* @dev Returns whether an operation is pending or not.
*/
function isOperationPending(bytes32 id) public view virtual returns (bool pending) {
return getTimestamp(id) > _DONE_TIMESTAMP;
}
/**
* @dev Returns whether an operation is ready or not.
*/
function isOperationReady(bytes32 id) public view virtual returns (bool ready) {
uint256 timestamp = getTimestamp(id);
return timestamp > _DONE_TIMESTAMP && timestamp <= block.timestamp;
}
/**
* @dev Returns whether an operation is done or not.
*/
function isOperationDone(bytes32 id) public view virtual returns (bool done) {
return getTimestamp(id) == _DONE_TIMESTAMP;
}
/**
* @dev Returns the timestamp at with an operation becomes ready (0 for
* unset operations, 1 for done operations).
*/
function getTimestamp(bytes32 id) public view virtual returns (uint256 timestamp) {
return _timestamps[id];
}
/**
* @dev Returns the minimum delay for an operation to become valid.
*
* This value can be changed by executing an operation that calls `updateDelay`.
*/
function getMinDelay() public view virtual returns (uint256 duration) {
return _minDelay;
}
/**
* @dev Returns the identifier of an operation containing a single
* transaction.
*/
function hashOperation(
address target,
uint256 value,
bytes calldata data,
bytes32 predecessor,
bytes32 salt
) public pure virtual returns (bytes32 hash) {
return keccak256(abi.encode(target, value, data, predecessor, salt));
}
/**
* @dev Returns the identifier of an operation containing a batch of
* transactions.
*/
function hashOperationBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt
) public pure virtual returns (bytes32 hash) {
return keccak256(abi.encode(targets, values, payloads, predecessor, salt));
}
/**
* @dev Schedule an operation containing a single transaction.
*
* Emits a {CallScheduled} event.
*
* Requirements:
*
* - the caller must have the 'proposer' role.
*/
function schedule(
address target,
uint256 value,
bytes calldata data,
bytes32 predecessor,
bytes32 salt,
uint256 delay
) public virtual onlyRole(PROPOSER_ROLE) {
bytes32 id = hashOperation(target, value, data, predecessor, salt);
_schedule(id, delay);
emit CallScheduled(id, 0, target, value, data, predecessor, delay);
}
/**
* @dev Schedule an operation containing a batch of transactions.
*
* Emits one {CallScheduled} event per transaction in the batch.
*
* Requirements:
*
* - the caller must have the 'proposer' role.
*/
function scheduleBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt,
uint256 delay
) public virtual onlyRole(PROPOSER_ROLE) {
require(targets.length == values.length, "TimelockController: length mismatch");
require(targets.length == payloads.length, "TimelockController: length mismatch");
bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
_schedule(id, delay);
for (uint256 i = 0; i < targets.length; ++i) {
emit CallScheduled(id, i, targets[i], values[i], payloads[i], predecessor, delay);
}
}
/**
* @dev Schedule an operation that is to becomes valid after a given delay.
*/
function _schedule(bytes32 id, uint256 delay) private {
require(!isOperation(id), "TimelockController: operation already scheduled");
require(delay >= getMinDelay(), "TimelockController: insufficient delay");
_timestamps[id] = block.timestamp + delay;
}
/**
* @dev Cancel an operation.
*
* Requirements:
*
* - the caller must have the 'canceller' role.
*/
function cancel(bytes32 id) public virtual onlyRole(CANCELLER_ROLE) {
require(isOperationPending(id), "TimelockController: operation cannot be cancelled");
delete _timestamps[id];
emit Cancelled(id);
}
/**
* @dev Execute an (ready) operation containing a single transaction.
*
* Emits a {CallExecuted} event.
*
* Requirements:
*
* - the caller must have the 'executor' role.
*/
// This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
// thus any modifications to the operation during reentrancy should be caught.
// slither-disable-next-line reentrancy-eth
function execute(
address target,
uint256 value,
bytes calldata payload,
bytes32 predecessor,
bytes32 salt
) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
bytes32 id = hashOperation(target, value, payload, predecessor, salt);
_beforeCall(id, predecessor);
_execute(target, value, payload);
emit CallExecuted(id, 0, target, value, payload);
_afterCall(id);
}
/**
* @dev Execute an (ready) operation containing a batch of transactions.
*
* Emits one {CallExecuted} event per transaction in the batch.
*
* Requirements:
*
* - the caller must have the 'executor' role.
*/
function executeBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt
) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
require(targets.length == values.length, "TimelockController: length mismatch");
require(targets.length == payloads.length, "TimelockController: length mismatch");
bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
_beforeCall(id, predecessor);
for (uint256 i = 0; i < targets.length; ++i) {
address target = targets[i];
uint256 value = values[i];
bytes calldata payload = payloads[i];
_execute(target, value, payload);
emit CallExecuted(id, i, target, value, payload);
}
_afterCall(id);
}
/**
* @dev Execute an operation's call.
*/
function _execute(
address target,
uint256 value,
bytes calldata data
) internal virtual {
(bool success, ) = target.call{value: value}(data);
require(success, "TimelockController: underlying transaction reverted");
}
/**
* @dev Checks before execution of an operation's calls.
*/
function _beforeCall(bytes32 id, bytes32 predecessor) private view {
require(isOperationReady(id), "TimelockController: operation is not ready");
require(predecessor == bytes32(0) || isOperationDone(predecessor), "TimelockController: missing dependency");
}
/**
* @dev Checks after execution of an operation's calls.
*/
function _afterCall(bytes32 id) private {
require(isOperationReady(id), "TimelockController: operation is not ready");
_timestamps[id] = _DONE_TIMESTAMP;
}
/**
* @dev Changes the minimum timelock duration for future operations.
*
* Emits a {MinDelayChange} event.
*
* Requirements:
*
* - the caller must be the timelock itself. This can only be achieved by scheduling and later executing
* an operation where the timelock is the target and the data is the ABI-encoded call to this function.
*/
function updateDelay(uint256 newDelay) external virtual {
require(msg.sender == address(this), "TimelockController: caller must be timelock");
emit MinDelayChange(_minDelay, newDelay);
_minDelay = newDelay;
}
/**
* @dev See {IERC721Receiver-onERC721Received}.
*/
function onERC721Received(
address,
address,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC721Received.selector;
}
/**
* @dev See {IERC1155Receiver-onERC1155Received}.
*/
function onERC1155Received(
address,
address,
uint256,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155Received.selector;
}
/**
* @dev See {IERC1155Receiver-onERC1155BatchReceived}.
*/
function onERC1155BatchReceived(
address,
address,
uint256[] memory,
uint256[] memory,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155BatchReceived.selector;
}
}
// File @openzeppelin/contracts/interfaces/draft-IERC1822.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
* @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
* proxy whose upgrades are fully controlled by the current implementation.
*/
interface IERC1822Proxiable {
/**
* @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
* address.
*
* IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
* bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
* function revert if invoked through a proxy.
*/
function proxiableUUID() external view returns (bytes32);
}
// File @openzeppelin/contracts/proxy/beacon/IBeacon.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
* @dev This is the interface that {BeaconProxy} expects of its beacon.
*/
interface IBeacon {
/**
* @dev Must return an address that can be used as a delegate call target.
*
* {BeaconProxy} will check that this address is a contract.
*/
function implementation() external view returns (address);
}
// File @openzeppelin/contracts/utils/StorageSlot.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
}
// File @openzeppelin/contracts/proxy/ERC1967/ERC1967Upgrade.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
/**
* @dev This abstract contract provides getters and event emitting update functions for
* https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
*
* _Available since v4.1._
*
* @custom:oz-upgrades-unsafe-allow delegatecall
*/
abstract contract ERC1967Upgrade {
// This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Emitted when the implementation is upgraded.
*/
event Upgraded(address indexed implementation);
/**
* @dev Returns the current implementation address.
*/
function _getImplementation() internal view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
/**
* @dev Stores a new address in the EIP1967 implementation slot.
*/
function _setImplementation(address newImplementation) private {
require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
}
/**
* @dev Perform implementation upgrade
*
* Emits an {Upgraded} event.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Perform implementation upgrade with additional setup call.
*
* Emits an {Upgraded} event.
*/
function _upgradeToAndCall(
address newImplementation,
bytes memory data,
bool forceCall
) internal {
_upgradeTo(newImplementation);
if (data.length > 0 || forceCall) {
Address.functionDelegateCall(newImplementation, data);
}
}
/**
* @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
*
* Emits an {Upgraded} event.
*/
function _upgradeToAndCallUUPS(
address newImplementation,
bytes memory data,
bool forceCall
) internal {
// Upgrades from old implementations will perform a rollback test. This test requires the new
// implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
// this special case will break upgrade paths from old UUPS implementation to new ones.
if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
_setImplementation(newImplementation);
} else {
try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
} catch {
revert("ERC1967Upgrade: new implementation is not UUPS");
}
_upgradeToAndCall(newImplementation, data, forceCall);
}
}
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Emitted when the admin account has changed.
*/
event AdminChanged(address previousAdmin, address newAdmin);
/**
* @dev Returns the current admin.
*/
function _getAdmin() internal view returns (address) {
return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
}
/**
* @dev Stores a new address in the EIP1967 admin slot.
*/
function _setAdmin(address newAdmin) private {
require(newAdmin != address(0), "ERC1967: new admin is the zero address");
StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*/
function _changeAdmin(address newAdmin) internal {
emit AdminChanged(_getAdmin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
* This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
*/
bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
/**
* @dev Emitted when the beacon is upgraded.
*/
event BeaconUpgraded(address indexed beacon);
/**
* @dev Returns the current beacon.
*/
function _getBeacon() internal view returns (address) {
return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
}
/**
* @dev Stores a new beacon in the EIP1967 beacon slot.
*/
function _setBeacon(address newBeacon) private {
require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
require(
Address.isContract(IBeacon(newBeacon).implementation()),
"ERC1967: beacon implementation is not a contract"
);
StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
}
/**
* @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
* not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
*
* Emits a {BeaconUpgraded} event.
*/
function _upgradeBeaconToAndCall(
address newBeacon,
bytes memory data,
bool forceCall
) internal {
_setBeacon(newBeacon);
emit BeaconUpgraded(newBeacon);
if (data.length > 0 || forceCall) {
Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
}
}
}
// File @openzeppelin/contracts/proxy/Proxy.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// File @openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
* implementation address that can be changed. This address is stored in storage in the location specified by
* https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
* implementation behind the proxy.
*/
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
/**
* @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
*
* If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
* function call, and allows initializing the storage of the proxy like a Solidity constructor.
*/
constructor(address _logic, bytes memory _data) payable {
_upgradeToAndCall(_logic, _data, false);
}
/**
* @dev Returns the current implementation address.
*/
function _implementation() internal view virtual override returns (address impl) {
return ERC1967Upgrade._getImplementation();
}
}
// File @openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This contract implements a proxy that is upgradeable by an admin.
*
* To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
* clashing], which can potentially be used in an attack, this contract uses the
* https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
* things that go hand in hand:
*
* 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
* that call matches one of the admin functions exposed by the proxy itself.
* 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
* implementation. If the admin tries to call a function on the implementation it will fail with an error that says
* "admin cannot fallback to proxy target".
*
* These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
* the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
* to sudden errors when trying to call a function from the proxy implementation.
*
* Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
* you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
*/
contract TransparentUpgradeableProxy is ERC1967Proxy {
/**
* @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
* optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
*/
constructor(
address _logic,
address admin_,
bytes memory _data
) payable ERC1967Proxy(_logic, _data) {
_changeAdmin(admin_);
}
/**
* @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
*/
modifier ifAdmin() {
if (msg.sender == _getAdmin()) {
_;
} else {
_fallback();
}
}
/**
* @dev Returns the current admin.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
*/
function admin() external ifAdmin returns (address admin_) {
admin_ = _getAdmin();
}
/**
* @dev Returns the current implementation.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
*/
function implementation() external ifAdmin returns (address implementation_) {
implementation_ = _implementation();
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
*/
function changeAdmin(address newAdmin) external virtual ifAdmin {
_changeAdmin(newAdmin);
}
/**
* @dev Upgrade the implementation of the proxy.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeToAndCall(newImplementation, bytes(""), false);
}
/**
* @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
* by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
* proxied contract.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
_upgradeToAndCall(newImplementation, data, true);
}
/**
* @dev Returns the current admin.
*/
function _admin() internal view virtual returns (address) {
return _getAdmin();
}
/**
* @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
*/
function _beforeFallback() internal virtual override {
require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
super._beforeFallback();
}
}
// File @openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/ProxyAdmin.sol)
pragma solidity ^0.8.0;
/**
* @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
* explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
*/
contract ProxyAdmin is Ownable {
/**
* @dev Returns the current implementation of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("implementation()")) == 0x5c60da1b
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Returns the current admin of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("admin()")) == 0xf851a440
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Changes the admin of `proxy` to `newAdmin`.
*
* Requirements:
*
* - This contract must be the current admin of `proxy`.
*/
function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
proxy.changeAdmin(newAdmin);
}
/**
* @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
proxy.upgradeTo(implementation);
}
/**
* @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
* {TransparentUpgradeableProxy-upgradeToAndCall}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgradeAndCall(
TransparentUpgradeableProxy proxy,
address implementation,
bytes memory data
) public payable virtual onlyOwner {
proxy.upgradeToAndCall{value: msg.value}(implementation, data);
}
}
// File @openzeppelin/contracts/security/Pausable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File @openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File @openzeppelin/contracts/token/ERC721/IERC721.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol@v4.8.0
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/token/ERC721/ERC721.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _ownerOf(tokenId);
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, 1);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = ERC721.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, 1);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
* - When `from` is zero, the tokens will be minted for `to`.
* - When `to` is zero, ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256, /* firstTokenId */
uint256 batchSize
) internal virtual {
if (batchSize > 1) {
if (from != address(0)) {
_balances[from] -= batchSize;
}
if (to != address(0)) {
_balances[to] += batchSize;
}
}
}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
}
// File @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual override {
super._beforeTokenTransfer(from, to, firstTokenId, batchSize);
if (batchSize > 1) {
// Will only trigger during construction. Batch transferring (minting) is not available afterwards.
revert("ERC721Enumerable: consecutive transfers not supported");
}
uint256 tokenId = firstTokenId;
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File @openzeppelin/contracts/utils/cryptography/ECDSA.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// File @openzeppelin/contracts/utils/structs/EnumerableSet.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// File @openzeppelin/contracts/utils/structs/EnumerableMap.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableMap.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableMap.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* The following map types are supported:
*
* - `uint256 -> address` (`UintToAddressMap`) since v3.0.0
* - `address -> uint256` (`AddressToUintMap`) since v4.6.0
* - `bytes32 -> bytes32` (`Bytes32ToBytes32Map`) since v4.6.0
* - `uint256 -> uint256` (`UintToUintMap`) since v4.7.0
* - `bytes32 -> uint256` (`Bytes32ToUintMap`) since v4.7.0
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableMap, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableMap.
* ====
*/
library EnumerableMap {
using EnumerableSet for EnumerableSet.Bytes32Set;
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct Bytes32ToBytes32Map {
// Storage of keys
EnumerableSet.Bytes32Set _keys;
mapping(bytes32 => bytes32) _values;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
Bytes32ToBytes32Map storage map,
bytes32 key,
bytes32 value
) internal returns (bool) {
map._values[key] = value;
return map._keys.add(key);
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToBytes32Map storage map, bytes32 key) internal returns (bool) {
delete map._values[key];
return map._keys.remove(key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool) {
return map._keys.contains(key);
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function length(Bytes32ToBytes32Map storage map) internal view returns (uint256) {
return map._keys.length();
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToBytes32Map storage map, uint256 index) internal view returns (bytes32, bytes32) {
bytes32 key = map._keys.at(index);
return (key, map._values[key]);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool, bytes32) {
bytes32 value = map._values[key];
if (value == bytes32(0)) {
return (contains(map, key), bytes32(0));
} else {
return (true, value);
}
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), "EnumerableMap: nonexistent key");
return value;
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToBytes32Map storage map,
bytes32 key,
string memory errorMessage
) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), errorMessage);
return value;
}
// UintToUintMap
struct UintToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
UintToUintMap storage map,
uint256 key,
uint256 value
) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToUintMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToUintMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToUintMap storage map, uint256 index) internal view returns (uint256, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToUintMap storage map, uint256 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToUintMap storage map, uint256 key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key)));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
UintToUintMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key), errorMessage));
}
// UintToAddressMap
struct UintToAddressMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
UintToAddressMap storage map,
uint256 key,
address value
) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
UintToAddressMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key), errorMessage))));
}
// AddressToUintMap
struct AddressToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
AddressToUintMap storage map,
address key,
uint256 value
) internal returns (bool) {
return set(map._inner, bytes32(uint256(uint160(key))), bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(AddressToUintMap storage map, address key) internal returns (bool) {
return remove(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(AddressToUintMap storage map, address key) internal view returns (bool) {
return contains(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(AddressToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressToUintMap storage map, uint256 index) internal view returns (address, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (address(uint160(uint256(key))), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(AddressToUintMap storage map, address key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(uint256(uint160(key))));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(AddressToUintMap storage map, address key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
AddressToUintMap storage map,
address key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key))), errorMessage));
}
// Bytes32ToUintMap
struct Bytes32ToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
Bytes32ToUintMap storage map,
bytes32 key,
uint256 value
) internal returns (bool) {
return set(map._inner, key, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToUintMap storage map, bytes32 key) internal returns (bool) {
return remove(map._inner, key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool) {
return contains(map._inner, key);
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(Bytes32ToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToUintMap storage map, uint256 index) internal view returns (bytes32, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (key, uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, key);
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToUintMap storage map, bytes32 key) internal view returns (uint256) {
return uint256(get(map._inner, key));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToUintMap storage map,
bytes32 key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, key, errorMessage));
}
}
// File contracts/interfaces/hooks/IPostDispatchHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
interface IPostDispatchHook {
enum Types {
UNUSED,
ROUTING,
AGGREGATION,
MERKLE_TREE,
INTERCHAIN_GAS_PAYMASTER,
FALLBACK_ROUTING,
ID_AUTH_ISM,
PAUSABLE,
PROTOCOL_FEE
}
/**
* @notice Returns an enum that represents the type of hook
*/
function hookType() external view returns (uint8);
/**
* @notice Returns whether the hook supports metadata
* @param metadata metadata
* @return Whether the hook supports metadata
*/
function supportsMetadata(bytes calldata metadata)
external
view
returns (bool);
/**
* @notice Post action after a message is dispatched via the Mailbox
* @param metadata The metadata required for the hook
* @param message The message passed from the Mailbox.dispatch() call
*/
function postDispatch(bytes calldata metadata, bytes calldata message)
external
payable;
/**
* @notice Compute the payment required by the postDispatch call
* @param metadata The metadata required for the hook
* @param message The message passed from the Mailbox.dispatch() call
* @return Quoted payment for the postDispatch call
*/
function quoteDispatch(bytes calldata metadata, bytes calldata message)
external
view
returns (uint256);
}
// File contracts/interfaces/IInterchainSecurityModule.sol
pragma solidity >=0.6.11;
interface IInterchainSecurityModule {
enum Types {
UNUSED,
ROUTING,
AGGREGATION,
LEGACY_MULTISIG,
MERKLE_ROOT_MULTISIG,
MESSAGE_ID_MULTISIG,
NULL, // used with relayer carrying no metadata
CCIP_READ
}
/**
* @notice Returns an enum that represents the type of security model
* encoded by this ISM.
* @dev Relayers infer how to fetch and format metadata.
*/
function moduleType() external view returns (uint8);
/**
* @notice Defines a security model responsible for verifying interchain
* messages based on the provided metadata.
* @param _metadata Off-chain metadata provided by a relayer, specific to
* the security model encoded by the module (e.g. validator signatures)
* @param _message Hyperlane encoded interchain message
* @return True if the message was verified
*/
function verify(bytes calldata _metadata, bytes calldata _message)
external
returns (bool);
}
interface ISpecifiesInterchainSecurityModule {
function interchainSecurityModule()
external
view
returns (IInterchainSecurityModule);
}
// File contracts/interfaces/IMailbox.sol
pragma solidity >=0.8.0;
interface IMailbox {
// ============ Events ============
/**
* @notice Emitted when a new message is dispatched via Hyperlane
* @param sender The address that dispatched the message
* @param destination The destination domain of the message
* @param recipient The message recipient address on `destination`
* @param message Raw bytes of message
*/
event Dispatch(
address indexed sender,
uint32 indexed destination,
bytes32 indexed recipient,
bytes message
);
/**
* @notice Emitted when a new message is dispatched via Hyperlane
* @param messageId The unique message identifier
*/
event DispatchId(bytes32 indexed messageId);
/**
* @notice Emitted when a Hyperlane message is processed
* @param messageId The unique message identifier
*/
event ProcessId(bytes32 indexed messageId);
/**
* @notice Emitted when a Hyperlane message is delivered
* @param origin The origin domain of the message
* @param sender The message sender address on `origin`
* @param recipient The address that handled the message
*/
event Process(
uint32 indexed origin,
bytes32 indexed sender,
address indexed recipient
);
function localDomain() external view returns (uint32);
function delivered(bytes32 messageId) external view returns (bool);
function defaultIsm() external view returns (IInterchainSecurityModule);
function defaultHook() external view returns (IPostDispatchHook);
function latestDispatchedId() external view returns (bytes32);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) external view returns (uint256 fee);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata body,
bytes calldata defaultHookMetadata
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata defaultHookMetadata
) external view returns (uint256 fee);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata body,
bytes calldata customHookMetadata,
IPostDispatchHook customHook
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata customHookMetadata,
IPostDispatchHook customHook
) external view returns (uint256 fee);
function process(bytes calldata metadata, bytes calldata message)
external
payable;
function recipientIsm(address recipient)
external
view
returns (IInterchainSecurityModule module);
}
// File contracts/libs/TypeCasts.sol
pragma solidity >=0.6.11;
library TypeCasts {
// alignment preserving cast
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
// alignment preserving cast
function bytes32ToAddress(bytes32 _buf) internal pure returns (address) {
return address(uint160(uint256(_buf)));
}
}
// File contracts/libs/Message.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane Message Library
* @notice Library for formatted messages used by Mailbox
**/
library Message {
using TypeCasts for bytes32;
uint256 private constant VERSION_OFFSET = 0;
uint256 private constant NONCE_OFFSET = 1;
uint256 private constant ORIGIN_OFFSET = 5;
uint256 private constant SENDER_OFFSET = 9;
uint256 private constant DESTINATION_OFFSET = 41;
uint256 private constant RECIPIENT_OFFSET = 45;
uint256 private constant BODY_OFFSET = 77;
/**
* @notice Returns formatted (packed) Hyperlane message with provided fields
* @dev This function should only be used in memory message construction.
* @param _version The version of the origin and destination Mailboxes
* @param _nonce A nonce to uniquely identify the message on its origin chain
* @param _originDomain Domain of origin chain
* @param _sender Address of sender as bytes32
* @param _destinationDomain Domain of destination chain
* @param _recipient Address of recipient on destination chain as bytes32
* @param _messageBody Raw bytes of message body
* @return Formatted message
*/
function formatMessage(
uint8 _version,
uint32 _nonce,
uint32 _originDomain,
bytes32 _sender,
uint32 _destinationDomain,
bytes32 _recipient,
bytes calldata _messageBody
) internal pure returns (bytes memory) {
return
abi.encodePacked(
_version,
_nonce,
_originDomain,
_sender,
_destinationDomain,
_recipient,
_messageBody
);
}
/**
* @notice Returns the message ID.
* @param _message ABI encoded Hyperlane message.
* @return ID of `_message`
*/
function id(bytes memory _message) internal pure returns (bytes32) {
return keccak256(_message);
}
/**
* @notice Returns the message version.
* @param _message ABI encoded Hyperlane message.
* @return Version of `_message`
*/
function version(bytes calldata _message) internal pure returns (uint8) {
return uint8(bytes1(_message[VERSION_OFFSET:NONCE_OFFSET]));
}
/**
* @notice Returns the message nonce.
* @param _message ABI encoded Hyperlane message.
* @return Nonce of `_message`
*/
function nonce(bytes calldata _message) internal pure returns (uint32) {
return uint32(bytes4(_message[NONCE_OFFSET:ORIGIN_OFFSET]));
}
/**
* @notice Returns the message origin domain.
* @param _message ABI encoded Hyperlane message.
* @return Origin domain of `_message`
*/
function origin(bytes calldata _message) internal pure returns (uint32) {
return uint32(bytes4(_message[ORIGIN_OFFSET:SENDER_OFFSET]));
}
/**
* @notice Returns the message sender as bytes32.
* @param _message ABI encoded Hyperlane message.
* @return Sender of `_message` as bytes32
*/
function sender(bytes calldata _message) internal pure returns (bytes32) {
return bytes32(_message[SENDER_OFFSET:DESTINATION_OFFSET]);
}
/**
* @notice Returns the message sender as address.
* @param _message ABI encoded Hyperlane message.
* @return Sender of `_message` as address
*/
function senderAddress(bytes calldata _message)
internal
pure
returns (address)
{
return sender(_message).bytes32ToAddress();
}
/**
* @notice Returns the message destination domain.
* @param _message ABI encoded Hyperlane message.
* @return Destination domain of `_message`
*/
function destination(bytes calldata _message)
internal
pure
returns (uint32)
{
return uint32(bytes4(_message[DESTINATION_OFFSET:RECIPIENT_OFFSET]));
}
/**
* @notice Returns the message recipient as bytes32.
* @param _message ABI encoded Hyperlane message.
* @return Recipient of `_message` as bytes32
*/
function recipient(bytes calldata _message)
internal
pure
returns (bytes32)
{
return bytes32(_message[RECIPIENT_OFFSET:BODY_OFFSET]);
}
/**
* @notice Returns the message recipient as address.
* @param _message ABI encoded Hyperlane message.
* @return Recipient of `_message` as address
*/
function recipientAddress(bytes calldata _message)
internal
pure
returns (address)
{
return recipient(_message).bytes32ToAddress();
}
/**
* @notice Returns the message body.
* @param _message ABI encoded Hyperlane message.
* @return Body of `_message`
*/
function body(bytes calldata _message)
internal
pure
returns (bytes calldata)
{
return bytes(_message[BODY_OFFSET:]);
}
}
// File contracts/client/MailboxClient.sol
pragma solidity >=0.6.11;
// ============ Internal Imports ============
// ============ External Imports ============
abstract contract MailboxClient is OwnableUpgradeable {
using Message for bytes;
IMailbox public immutable mailbox;
uint32 public immutable localDomain;
IPostDispatchHook public hook;
IInterchainSecurityModule public interchainSecurityModule;
// ============ Modifiers ============
modifier onlyContract(address _contract) {
require(
Address.isContract(_contract),
"MailboxClient: invalid mailbox"
);
_;
}
modifier onlyContractOrNull(address _contract) {
require(
Address.isContract(_contract) || _contract == address(0),
"MailboxClient: invalid contract setting"
);
_;
}
/**
* @notice Only accept messages from an Hyperlane Mailbox contract
*/
modifier onlyMailbox() {
require(
msg.sender == address(mailbox),
"MailboxClient: sender not mailbox"
);
_;
}
constructor(address _mailbox) onlyContract(_mailbox) {
mailbox = IMailbox(_mailbox);
localDomain = mailbox.localDomain();
_transferOwnership(msg.sender);
}
/**
* @notice Sets the address of the application's custom hook.
* @param _hook The address of the hook contract.
*/
function setHook(address _hook) public onlyContractOrNull(_hook) onlyOwner {
hook = IPostDispatchHook(_hook);
}
/**
* @notice Sets the address of the application's custom interchain security module.
* @param _module The address of the interchain security module contract.
*/
function setInterchainSecurityModule(address _module)
public
onlyContractOrNull(_module)
onlyOwner
{
interchainSecurityModule = IInterchainSecurityModule(_module);
}
// ======== Initializer =========
function _MailboxClient_initialize(
address _hook,
address _interchainSecurityModule,
address _owner
) internal onlyInitializing {
__Ownable_init();
setHook(_hook);
setInterchainSecurityModule(_interchainSecurityModule);
_transferOwnership(_owner);
}
function _isLatestDispatched(bytes32 id) internal view returns (bool) {
return mailbox.latestDispatchedId() == id;
}
function _metadata(
uint32 /*_destinationDomain*/
) internal view virtual returns (bytes memory) {
return "";
}
function _dispatch(
uint32 _destinationDomain,
bytes32 _recipient,
bytes memory _messageBody
) internal virtual returns (bytes32) {
return
_dispatch(_destinationDomain, _recipient, msg.value, _messageBody);
}
function _dispatch(
uint32 _destinationDomain,
bytes32 _recipient,
uint256 _value,
bytes memory _messageBody
) internal virtual returns (bytes32) {
return
mailbox.dispatch{value: _value}(
_destinationDomain,
_recipient,
_messageBody,
_metadata(_destinationDomain),
hook
);
}
function _quoteDispatch(
uint32 _destinationDomain,
bytes32 _recipient,
bytes memory _messageBody
) internal view virtual returns (uint256) {
return
mailbox.quoteDispatch(
_destinationDomain,
_recipient,
_messageBody,
_metadata(_destinationDomain),
hook
);
}
}
// File contracts/hooks/libs/StandardHookMetadata.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
/**
* Format of metadata:
*
* [0:1] variant
* [2:33] msg.value
* [34:65] Gas limit for message (IGP)
* [66:85] Refund address for message (IGP)
* [86:] Custom metadata
*/
library StandardHookMetadata {
uint8 private constant VARIANT_OFFSET = 0;
uint8 private constant MSG_VALUE_OFFSET = 2;
uint8 private constant GAS_LIMIT_OFFSET = 34;
uint8 private constant REFUND_ADDRESS_OFFSET = 66;
uint256 private constant MIN_METADATA_LENGTH = 86;
uint16 public constant VARIANT = 1;
/**
* @notice Returns the variant of the metadata.
* @param _metadata ABI encoded global hook metadata.
* @return variant of the metadata as uint8.
*/
function variant(bytes calldata _metadata) internal pure returns (uint16) {
if (_metadata.length < VARIANT_OFFSET + 2) return 0;
return uint16(bytes2(_metadata[VARIANT_OFFSET:VARIANT_OFFSET + 2]));
}
/**
* @notice Returns the specified value for the message.
* @param _metadata ABI encoded global hook metadata.
* @param _default Default fallback value.
* @return Value for the message as uint256.
*/
function msgValue(bytes calldata _metadata, uint256 _default)
internal
pure
returns (uint256)
{
if (_metadata.length < MSG_VALUE_OFFSET + 32) return _default;
return
uint256(bytes32(_metadata[MSG_VALUE_OFFSET:MSG_VALUE_OFFSET + 32]));
}
/**
* @notice Returns the specified gas limit for the message.
* @param _metadata ABI encoded global hook metadata.
* @param _default Default fallback gas limit.
* @return Gas limit for the message as uint256.
*/
function gasLimit(bytes calldata _metadata, uint256 _default)
internal
pure
returns (uint256)
{
if (_metadata.length < GAS_LIMIT_OFFSET + 32) return _default;
return
uint256(bytes32(_metadata[GAS_LIMIT_OFFSET:GAS_LIMIT_OFFSET + 32]));
}
/**
* @notice Returns the specified refund address for the message.
* @param _metadata ABI encoded global hook metadata.
* @param _default Default fallback refund address.
* @return Refund address for the message as address.
*/
function refundAddress(bytes calldata _metadata, address _default)
internal
pure
returns (address)
{
if (_metadata.length < REFUND_ADDRESS_OFFSET + 20) return _default;
return
address(
bytes20(
_metadata[REFUND_ADDRESS_OFFSET:REFUND_ADDRESS_OFFSET + 20]
)
);
}
/**
* @notice Returns the specified refund address for the message.
* @param _metadata ABI encoded global hook metadata.
* @return Refund address for the message as address.
*/
function getCustomMetadata(bytes calldata _metadata)
internal
pure
returns (bytes calldata)
{
if (_metadata.length < MIN_METADATA_LENGTH) return _metadata[0:0];
return _metadata[MIN_METADATA_LENGTH:];
}
/**
* @notice Formats the specified gas limit and refund address into global hook metadata.
* @param _msgValue msg.value for the message.
* @param _gasLimit Gas limit for the message.
* @param _refundAddress Refund address for the message.
* @param _customMetadata Additional metadata to include in the global hook metadata.
* @return ABI encoded global hook metadata.
*/
function formatMetadata(
uint256 _msgValue,
uint256 _gasLimit,
address _refundAddress,
bytes memory _customMetadata
) internal pure returns (bytes memory) {
return
abi.encodePacked(
VARIANT,
_msgValue,
_gasLimit,
_refundAddress,
_customMetadata
);
}
/**
* @notice Formats the specified gas limit and refund address into global hook metadata.
* @param _msgValue msg.value for the message.
* @return ABI encoded global hook metadata.
*/
function formatMetadata(uint256 _msgValue)
internal
view
returns (bytes memory)
{
return formatMetadata(_msgValue, uint256(0), msg.sender, "");
}
/**
* @notice Formats the specified gas limit and refund address into global hook metadata.
* @param _gasLimit Gas limit for the message.
* @param _refundAddress Refund address for the message.
* @return ABI encoded global hook metadata.
*/
function formatMetadata(uint256 _gasLimit, address _refundAddress)
internal
pure
returns (bytes memory)
{
return formatMetadata(uint256(0), _gasLimit, _refundAddress, "");
}
}
// File contracts/interfaces/IMessageRecipient.sol
pragma solidity >=0.6.11;
interface IMessageRecipient {
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) external payable;
}
// File contracts/libs/EnumerableMapExtended.sol
pragma solidity >=0.6.11;
// ============ External Imports ============
// extends EnumerableMap with uint256 => bytes32 type
// modelled after https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v4.8.0/contracts/utils/structs/EnumerableMap.sol
library EnumerableMapExtended {
using EnumerableMap for EnumerableMap.Bytes32ToBytes32Map;
using EnumerableSet for EnumerableSet.Bytes32Set;
struct UintToBytes32Map {
EnumerableMap.Bytes32ToBytes32Map _inner;
}
// ============ Library Functions ============
function keys(UintToBytes32Map storage map)
internal
view
returns (uint256[] memory _keys)
{
uint256 _length = map._inner.length();
_keys = new uint256[](_length);
for (uint256 i = 0; i < _length; i++) {
_keys[i] = uint256(map._inner._keys.at(i));
}
}
function uint32Keys(UintToBytes32Map storage map)
internal
view
returns (uint32[] memory _keys)
{
uint256[] memory uint256keys = keys(map);
_keys = new uint32[](uint256keys.length);
for (uint256 i = 0; i < uint256keys.length; i++) {
_keys[i] = uint32(uint256keys[i]);
}
}
function set(
UintToBytes32Map storage map,
uint256 key,
bytes32 value
) internal {
map._inner.set(bytes32(key), value);
}
function get(UintToBytes32Map storage map, uint256 key)
internal
view
returns (bytes32)
{
return map._inner.get(bytes32(key));
}
function tryGet(UintToBytes32Map storage map, uint256 key)
internal
view
returns (bool, bytes32)
{
return map._inner.tryGet(bytes32(key));
}
function remove(UintToBytes32Map storage map, uint256 key)
internal
returns (bool)
{
return map._inner.remove(bytes32(key));
}
function contains(UintToBytes32Map storage map, uint256 key)
internal
view
returns (bool)
{
return map._inner.contains(bytes32(key));
}
function length(UintToBytes32Map storage map)
internal
view
returns (uint256)
{
return map._inner.length();
}
function at(UintToBytes32Map storage map, uint256 index)
internal
view
returns (uint256, bytes32)
{
(bytes32 key, bytes32 value) = map._inner.at(index);
return (uint256(key), value);
}
}
// File contracts/client/Router.sol
pragma solidity >=0.6.11;
// ============ Internal Imports ============
// ============ External Imports ============
abstract contract Router is MailboxClient, IMessageRecipient {
using EnumerableMapExtended for EnumerableMapExtended.UintToBytes32Map;
using Strings for uint32;
// ============ Mutable Storage ============
EnumerableMapExtended.UintToBytes32Map internal _routers;
uint256[48] private __GAP; // gap for upgrade safety
constructor(address _mailbox) MailboxClient(_mailbox) {}
// ============ External functions ============
function domains() external view returns (uint32[] memory) {
return _routers.uint32Keys();
}
/**
* @notice Returns the address of the Router contract for the given domain
* @param _domain The remote domain ID.
* @dev Returns 0 address if no router is enrolled for the given domain
* @return router The address of the Router contract for the given domain
*/
function routers(uint32 _domain) public view virtual returns (bytes32) {
(, bytes32 _router) = _routers.tryGet(_domain);
return _router;
}
/**
* @notice Unregister the domain
* @param _domain The domain of the remote Application Router
*/
function unenrollRemoteRouter(uint32 _domain) external virtual onlyOwner {
_unenrollRemoteRouter(_domain);
}
/**
* @notice Register the address of a Router contract for the same Application on a remote chain
* @param _domain The domain of the remote Application Router
* @param _router The address of the remote Application Router
*/
function enrollRemoteRouter(uint32 _domain, bytes32 _router)
external
virtual
onlyOwner
{
_enrollRemoteRouter(_domain, _router);
}
/**
* @notice Batch version of `enrollRemoteRouter`
* @param _domains The domains of the remote Application Routers
* @param _addresses The addresses of the remote Application Routers
*/
function enrollRemoteRouters(
uint32[] calldata _domains,
bytes32[] calldata _addresses
) external virtual onlyOwner {
require(_domains.length == _addresses.length, "!length");
uint256 length = _domains.length;
for (uint256 i = 0; i < length; i += 1) {
_enrollRemoteRouter(_domains[i], _addresses[i]);
}
}
/**
* @notice Batch version of `unenrollRemoteRouter`
* @param _domains The domains of the remote Application Routers
*/
function unenrollRemoteRouters(uint32[] calldata _domains)
external
virtual
onlyOwner
{
uint256 length = _domains.length;
for (uint256 i = 0; i < length; i += 1) {
_unenrollRemoteRouter(_domains[i]);
}
}
/**
* @notice Handles an incoming message
* @param _origin The origin domain
* @param _sender The sender address
* @param _message The message
*/
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) external payable virtual override onlyMailbox {
bytes32 _router = _mustHaveRemoteRouter(_origin);
require(_router == _sender, "Enrolled router does not match sender");
_handle(_origin, _sender, _message);
}
// ============ Virtual functions ============
function _handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) internal virtual;
// ============ Internal functions ============
/**
* @notice Set the router for a given domain
* @param _domain The domain
* @param _address The new router
*/
function _enrollRemoteRouter(uint32 _domain, bytes32 _address)
internal
virtual
{
_routers.set(_domain, _address);
}
/**
* @notice Remove the router for a given domain
* @param _domain The domain
*/
function _unenrollRemoteRouter(uint32 _domain) internal virtual {
require(_routers.remove(_domain), _domainNotFoundError(_domain));
}
/**
* @notice Return true if the given domain / router is the address of a remote Application Router
* @param _domain The domain of the potential remote Application Router
* @param _address The address of the potential remote Application Router
*/
function _isRemoteRouter(uint32 _domain, bytes32 _address)
internal
view
returns (bool)
{
return routers(_domain) == _address;
}
/**
* @notice Assert that the given domain has a Application Router registered and return its address
* @param _domain The domain of the chain for which to get the Application Router
* @return _router The address of the remote Application Router on _domain
*/
function _mustHaveRemoteRouter(uint32 _domain)
internal
view
returns (bytes32)
{
(bool contained, bytes32 _router) = _routers.tryGet(_domain);
require(contained, _domainNotFoundError(_domain));
return _router;
}
function _domainNotFoundError(uint32 _domain)
internal
pure
returns (string memory)
{
return
string.concat(
"No router enrolled for domain: ",
_domain.toString()
);
}
function _dispatch(uint32 _destinationDomain, bytes memory _messageBody)
internal
virtual
returns (bytes32)
{
return _dispatch(_destinationDomain, msg.value, _messageBody);
}
function _dispatch(
uint32 _destinationDomain,
uint256 _value,
bytes memory _messageBody
) internal virtual returns (bytes32) {
bytes32 _router = _mustHaveRemoteRouter(_destinationDomain);
return
super._dispatch(_destinationDomain, _router, _value, _messageBody);
}
function _quoteDispatch(
uint32 _destinationDomain,
bytes memory _messageBody
) internal view virtual returns (uint256) {
bytes32 _router = _mustHaveRemoteRouter(_destinationDomain);
return super._quoteDispatch(_destinationDomain, _router, _messageBody);
}
}
// File contracts/client/GasRouter.sol
pragma solidity >=0.6.11;
abstract contract GasRouter is Router {
// ============ Mutable Storage ============
mapping(uint32 => uint256) public destinationGas;
struct GasRouterConfig {
uint32 domain;
uint256 gas;
}
constructor(address _mailbox) Router(_mailbox) {}
/**
* @notice Sets the gas amount dispatched for each configured domain.
* @param gasConfigs The array of GasRouterConfig structs
*/
function setDestinationGas(GasRouterConfig[] calldata gasConfigs)
external
onlyOwner
{
for (uint256 i = 0; i < gasConfigs.length; i += 1) {
_setDestinationGas(gasConfigs[i].domain, gasConfigs[i].gas);
}
}
/**
* @notice Sets the gas amount dispatched for each configured domain.
* @param domain The destination domain ID
* @param gas The gas limit
*/
function setDestinationGas(uint32 domain, uint256 gas) external onlyOwner {
_setDestinationGas(domain, gas);
}
/**
* @notice Returns the gas payment required to dispatch a message to the given domain's router.
* @param _destinationDomain The domain of the router.
* @return _gasPayment Payment computed by the registered InterchainGasPaymaster.
*/
function quoteGasPayment(uint32 _destinationDomain)
external
view
returns (uint256 _gasPayment)
{
return _quoteDispatch(_destinationDomain, "");
}
function _refundAddress(uint32) internal view virtual returns (address) {
return msg.sender;
}
function _metadata(uint32 _destination)
internal
view
virtual
override
returns (bytes memory)
{
return
StandardHookMetadata.formatMetadata(
destinationGas[_destination],
_refundAddress(_destination)
);
}
function _setDestinationGas(uint32 domain, uint256 gas) internal {
destinationGas[domain] = gas;
}
}
// File contracts/hooks/libs/AbstractPostDispatchHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
/**
* @title AbstractPostDispatch
* @notice Abstract post dispatch hook supporting the current global hook metadata variant.
*/
abstract contract AbstractPostDispatchHook is IPostDispatchHook {
using StandardHookMetadata for bytes;
// ============ External functions ============
/// @inheritdoc IPostDispatchHook
function supportsMetadata(bytes calldata metadata)
public
pure
virtual
override
returns (bool)
{
return
metadata.length == 0 ||
metadata.variant() == StandardHookMetadata.VARIANT;
}
/// @inheritdoc IPostDispatchHook
function postDispatch(bytes calldata metadata, bytes calldata message)
external
payable
override
{
require(
supportsMetadata(metadata),
"AbstractPostDispatchHook: invalid metadata variant"
);
_postDispatch(metadata, message);
}
/// @inheritdoc IPostDispatchHook
function quoteDispatch(bytes calldata metadata, bytes calldata message)
public
view
override
returns (uint256)
{
require(
supportsMetadata(metadata),
"AbstractPostDispatchHook: invalid metadata variant"
);
return _quoteDispatch(metadata, message);
}
// ============ Internal functions ============
/**
* @notice Post dispatch hook implementation.
* @param metadata The metadata of the message being dispatched.
* @param message The message being dispatched.
*/
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
virtual;
/**
* @notice Quote dispatch hook implementation.
* @param metadata The metadata of the message being dispatched.
* @param message The message being dispatched.
* @return The quote for the dispatch.
*/
function _quoteDispatch(bytes calldata metadata, bytes calldata message)
internal
view
virtual
returns (uint256);
}
// File contracts/libs/LibBit.sol
pragma solidity >=0.8.0;
/// @notice Library for bit shifting and masking
library LibBit {
function setBit(uint256 _value, uint256 _index)
internal
pure
returns (uint256)
{
return _value | (1 << _index);
}
function clearBit(uint256 _value, uint256 _index)
internal
pure
returns (uint256)
{
return _value & ~(1 << _index);
}
function isBitSet(uint256 _value, uint256 _index)
internal
pure
returns (bool)
{
return (_value >> _index) & 1 == 1;
}
}
// File contracts/isms/hook/AbstractMessageIdAuthorizedIsm.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title AbstractMessageIdAuthorizedIsm
* @notice Uses external verfication options to verify interchain messages which need a authorized caller
*/
abstract contract AbstractMessageIdAuthorizedIsm is
IInterchainSecurityModule,
Initializable
{
using Address for address payable;
using LibBit for uint256;
using Message for bytes;
// ============ Public Storage ============
/// @notice Maps messageId to whether or not the message has been verified
/// first bit is boolean for verification
/// rest of bits is the amount to send to the recipient
/// @dev bc of the bit packing, we can only send up to 2^255 wei
/// @dev the first bit is reserved for verification and the rest 255 bits are for the msg.value
mapping(bytes32 => uint256) public verifiedMessages;
/// @notice Index of verification bit in verifiedMessages
uint256 public constant VERIFIED_MASK_INDEX = 255;
/// @notice address for the authorized hook
bytes32 public authorizedHook;
// ============ Events ============
/// @notice Emitted when a message is received from the external bridge
event ReceivedMessage(bytes32 indexed messageId);
// ============ Initializer ============
function setAuthorizedHook(bytes32 _hook) external initializer {
require(
_hook != bytes32(0),
"AbstractMessageIdAuthorizedIsm: invalid authorized hook"
);
authorizedHook = _hook;
}
// ============ External Functions ============
/**
* @notice Verify a message was received by ISM.
* @param message Message to verify.
*/
function verify(
bytes calldata,
/*_metadata*/
bytes calldata message
) external returns (bool) {
bytes32 messageId = message.id();
// check for the first bit (used for verification)
bool verified = verifiedMessages[messageId].isBitSet(
VERIFIED_MASK_INDEX
);
// rest 255 bits contains the msg.value passed from the hook
if (verified) {
uint256 _msgValue = verifiedMessages[messageId].clearBit(
VERIFIED_MASK_INDEX
);
if (_msgValue > 0) {
verifiedMessages[messageId] -= _msgValue;
payable(message.recipientAddress()).sendValue(_msgValue);
}
}
return verified;
}
/**
* @notice Receive a message from the AbstractMessageIdAuthHook
* @dev Only callable by the authorized hook.
* @param messageId Hyperlane Id of the message.
*/
function verifyMessageId(bytes32 messageId) external payable virtual {
require(
_isAuthorized(),
"AbstractMessageIdAuthorizedIsm: sender is not the hook"
);
require(
msg.value < 2**VERIFIED_MASK_INDEX,
"AbstractMessageIdAuthorizedIsm: msg.value must be less than 2^255"
);
verifiedMessages[messageId] = msg.value.setBit(VERIFIED_MASK_INDEX);
emit ReceivedMessage(messageId);
}
function _isAuthorized() internal view virtual returns (bool);
}
// File contracts/hooks/libs/AbstractMessageIdAuthHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
/**
* @title AbstractMessageIdAuthHook
* @notice Message hook to inform an Abstract Message ID ISM of messages published through
* a third-party bridge.
*/
abstract contract AbstractMessageIdAuthHook is
AbstractPostDispatchHook,
MailboxClient
{
using StandardHookMetadata for bytes;
using Message for bytes;
// ============ Constants ============
// left-padded address for ISM to verify messages
bytes32 public immutable ism;
// Domain of chain on which the ISM is deployed
uint32 public immutable destinationDomain;
// ============ Constructor ============
constructor(
address _mailbox,
uint32 _destinationDomain,
bytes32 _ism
) MailboxClient(_mailbox) {
require(_ism != bytes32(0), "AbstractMessageIdAuthHook: invalid ISM");
require(
_destinationDomain != 0,
"AbstractMessageIdAuthHook: invalid destination domain"
);
ism = _ism;
destinationDomain = _destinationDomain;
}
/// @inheritdoc IPostDispatchHook
function hookType() external pure returns (uint8) {
return uint8(IPostDispatchHook.Types.ID_AUTH_ISM);
}
// ============ Internal functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
{
bytes32 id = message.id();
require(
_isLatestDispatched(id),
"AbstractMessageIdAuthHook: message not latest dispatched"
);
require(
message.destination() == destinationDomain,
"AbstractMessageIdAuthHook: invalid destination domain"
);
bytes memory payload = abi.encodeCall(
AbstractMessageIdAuthorizedIsm.verifyMessageId,
id
);
_sendMessageId(metadata, payload);
}
/**
* @notice Send a message to the ISM.
* @param metadata The metadata for the hook caller
* @param payload The payload for call to the ISM
*/
function _sendMessageId(bytes calldata metadata, bytes memory payload)
internal
virtual;
}
// File contracts/interfaces/hooks/IMessageDispatcher.sol
pragma solidity >=0.8.0;
/**
* @title ERC-5164: Cross-Chain Execution Standard
* @dev See https://eips.ethereum.org/EIPS/eip-5164
*/
interface IMessageDispatcher {
/**
* @notice Emitted when a message has successfully been dispatched to the executor chain.
* @param messageId ID uniquely identifying the message
* @param from Address that dispatched the message
* @param toChainId ID of the chain receiving the message
* @param to Address that will receive the message
* @param data Data that was dispatched
*/
event MessageDispatched(
bytes32 indexed messageId,
address indexed from,
uint256 indexed toChainId,
address to,
bytes data
);
function dispatchMessage(
uint256 toChainId,
address to,
bytes calldata data
) external returns (bytes32);
}
// File contracts/hooks/aggregation/ERC5164Hook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title 5164MessageHook
* @notice Message hook to inform the 5164 ISM of messages published through
* any of the 5164 adapters.
*/
contract ERC5164Hook is AbstractMessageIdAuthHook {
IMessageDispatcher public immutable dispatcher;
constructor(
address _mailbox,
uint32 _destinationDomain,
bytes32 _ism,
address _dispatcher
) AbstractMessageIdAuthHook(_mailbox, _destinationDomain, _ism) {
require(
Address.isContract(_dispatcher),
"ERC5164Hook: invalid dispatcher"
);
dispatcher = IMessageDispatcher(_dispatcher);
}
// ============ Internal Functions ============
function _quoteDispatch(bytes calldata, bytes calldata)
internal
pure
override
returns (uint256)
{
return 0; // EIP-5164 doesn't enforce a gas abstraction
}
function _sendMessageId(
bytes calldata,
/* metadata */
bytes memory payload
) internal override {
require(msg.value == 0, "ERC5164Hook: no value allowed");
dispatcher.dispatchMessage(
destinationDomain,
TypeCasts.bytes32ToAddress(ism),
payload
);
}
}
// File contracts/libs/MetaProxy.sol
pragma solidity >=0.7.6;
/// @dev Adapted from https://eips.ethereum.org/EIPS/eip-3448
library MetaProxy {
bytes32 private constant PREFIX =
hex"600b380380600b3d393df3363d3d373d3d3d3d60368038038091363936013d73";
bytes13 private constant SUFFIX = hex"5af43d3d93803e603457fd5bf3";
function bytecode(address _implementation, bytes memory _metadata)
internal
pure
returns (bytes memory)
{
return
abi.encodePacked(
PREFIX,
bytes20(_implementation),
SUFFIX,
_metadata,
_metadata.length
);
}
function metadata() internal pure returns (bytes memory) {
bytes memory data;
assembly {
let posOfMetadataSize := sub(calldatasize(), 32)
let size := calldataload(posOfMetadataSize)
let dataPtr := sub(posOfMetadataSize, size)
data := mload(64)
// increment free memory pointer by metadata size + 32 bytes (length)
mstore(64, add(data, add(size, 32)))
mstore(data, size)
let memPtr := add(data, 32)
calldatacopy(memPtr, dataPtr, size)
}
return data;
}
}
// File contracts/hooks/aggregation/StaticAggregationHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
contract StaticAggregationHook is AbstractPostDispatchHook {
using StandardHookMetadata for bytes;
// ============ External functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.AGGREGATION);
}
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
{
address[] memory _hooks = hooks(message);
uint256 count = _hooks.length;
for (uint256 i = 0; i < count; i++) {
uint256 quote = IPostDispatchHook(_hooks[i]).quoteDispatch(
metadata,
message
);
IPostDispatchHook(_hooks[i]).postDispatch{value: quote}(
metadata,
message
);
}
}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(bytes calldata metadata, bytes calldata message)
internal
view
override
returns (uint256)
{
address[] memory _hooks = hooks(message);
uint256 count = _hooks.length;
uint256 total = 0;
for (uint256 i = 0; i < count; i++) {
total += IPostDispatchHook(_hooks[i]).quoteDispatch(
metadata,
message
);
}
return total;
}
function hooks(bytes calldata) public pure returns (address[] memory) {
return abi.decode(MetaProxy.metadata(), (address[]));
}
}
// File @openzeppelin/contracts/utils/Create2.sol@v4.8.0
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Create2.sol)
pragma solidity ^0.8.0;
/**
* @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.
* `CREATE2` can be used to compute in advance the address where a smart
* contract will be deployed, which allows for interesting new mechanisms known
* as 'counterfactual interactions'.
*
* See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more
* information.
*/
library Create2 {
/**
* @dev Deploys a contract using `CREATE2`. The address where the contract
* will be deployed can be known in advance via {computeAddress}.
*
* The bytecode for a contract can be obtained from Solidity with
* `type(contractName).creationCode`.
*
* Requirements:
*
* - `bytecode` must not be empty.
* - `salt` must have not been used for `bytecode` already.
* - the factory must have a balance of at least `amount`.
* - if `amount` is non-zero, `bytecode` must have a `payable` constructor.
*/
function deploy(
uint256 amount,
bytes32 salt,
bytes memory bytecode
) internal returns (address addr) {
require(address(this).balance >= amount, "Create2: insufficient balance");
require(bytecode.length != 0, "Create2: bytecode length is zero");
/// @solidity memory-safe-assembly
assembly {
addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)
}
require(addr != address(0), "Create2: Failed on deploy");
}
/**
* @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the
* `bytecodeHash` or `salt` will result in a new destination address.
*/
function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {
return computeAddress(salt, bytecodeHash, address(this));
}
/**
* @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at
* `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.
*/
function computeAddress(
bytes32 salt,
bytes32 bytecodeHash,
address deployer
) internal pure returns (address addr) {
/// @solidity memory-safe-assembly
assembly {
let ptr := mload(0x40) // Get free memory pointer
// | | ↓ ptr ... ↓ ptr + 0x0B (start) ... ↓ ptr + 0x20 ... ↓ ptr + 0x40 ... |
// |-------------------|---------------------------------------------------------------------------|
// | bytecodeHash | CCCCCCCCCCCCC...CC |
// | salt | BBBBBBBBBBBBB...BB |
// | deployer | 000000...0000AAAAAAAAAAAAAAAAAAA...AA |
// | 0xFF | FF |
// |-------------------|---------------------------------------------------------------------------|
// | memory | 000000...00FFAAAAAAAAAAAAAAAAAAA...AABBBBBBBBBBBBB...BBCCCCCCCCCCCCC...CC |
// | keccak(start, 85) | ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑ |
mstore(add(ptr, 0x40), bytecodeHash)
mstore(add(ptr, 0x20), salt)
mstore(ptr, deployer) // Right-aligned with 12 preceding garbage bytes
let start := add(ptr, 0x0b) // The hashed data starts at the final garbage byte which we will set to 0xff
mstore8(start, 0xff)
addr := keccak256(start, 85)
}
}
}
// File contracts/libs/StaticAddressSetFactory.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
// ============ Internal Imports ============
abstract contract StaticThresholdAddressSetFactory {
// ============ Immutables ============
address public immutable implementation;
// ============ Constructor ============
constructor() {
implementation = _deployImplementation();
}
function _deployImplementation() internal virtual returns (address);
/**
* @notice Deploys a StaticThresholdAddressSet contract address for the given
* values
* @dev Consider sorting addresses to ensure contract reuse
* @param _values An array of addresses
* @param _threshold The threshold value to use
* @return set The contract address representing this StaticThresholdAddressSet
*/
function deploy(address[] calldata _values, uint8 _threshold)
public
returns (address)
{
(bytes32 _salt, bytes memory _bytecode) = _saltAndBytecode(
_values,
_threshold
);
address _set = _getAddress(_salt, _bytecode);
if (!Address.isContract(_set)) {
_set = Create2.deploy(0, _salt, _bytecode);
}
return _set;
}
/**
* @notice Returns the StaticThresholdAddressSet contract address for the given
* values
* @dev Consider sorting addresses to ensure contract reuse
* @param _values An array of addresses
* @param _threshold The threshold value to use
* @return set The contract address representing this StaticThresholdAddressSet
*/
function getAddress(address[] calldata _values, uint8 _threshold)
external
view
returns (address)
{
(bytes32 _salt, bytes memory _bytecode) = _saltAndBytecode(
_values,
_threshold
);
return _getAddress(_salt, _bytecode);
}
/**
* @notice Returns the StaticThresholdAddressSet contract address for the given
* values
* @param _salt The salt used in Create2
* @param _bytecode The metaproxy bytecode used in Create2
* @return set The contract address representing this StaticThresholdAddressSet
*/
function _getAddress(bytes32 _salt, bytes memory _bytecode)
internal
view
returns (address)
{
bytes32 _bytecodeHash = keccak256(_bytecode);
return Create2.computeAddress(_salt, _bytecodeHash);
}
/**
* @notice Returns the create2 salt and bytecode for the given values
* @param _values An array of addresses
* @param _threshold The threshold value to use
* @return _salt The salt used in Create2
* @return _bytecode The metaproxy bytecode used in Create2
*/
function _saltAndBytecode(address[] calldata _values, uint8 _threshold)
internal
view
returns (bytes32, bytes memory)
{
bytes memory _metadata = abi.encode(_values, _threshold);
bytes memory _bytecode = MetaProxy.bytecode(implementation, _metadata);
bytes32 _salt = keccak256(_metadata);
return (_salt, _bytecode);
}
}
abstract contract StaticAddressSetFactory is StaticThresholdAddressSetFactory {
/**
* @notice Deploys a StaticAddressSet contract address for the given
* values
* @dev Consider sorting addresses to ensure contract reuse
* @param _values An array of addresses
* @return set The contract address representing this StaticAddressSet
*/
function deploy(address[] calldata _values) external returns (address) {
return super.deploy(_values, uint8(_values.length));
}
/**
* @notice Returns the StaticAddressSet contract address for the given
* values
* @dev Consider sorting addresses to ensure contract reuse
* @param _values An array of addresses
* @return set The contract address representing this StaticAddressSet
*/
function getAddress(address[] calldata _values)
external
view
returns (address)
{
(bytes32 _salt, bytes memory _bytecode) = _saltAndBytecode(
_values,
uint8(_values.length)
);
return super._getAddress(_salt, _bytecode);
}
}
// File contracts/hooks/aggregation/StaticAggregationHookFactory.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
contract StaticAggregationHookFactory is StaticAddressSetFactory {
function _deployImplementation()
internal
virtual
override
returns (address)
{
return address(new StaticAggregationHook());
}
}
// File contracts/interfaces/IGasOracle.sol
pragma solidity >=0.8.0;
interface IGasOracle {
struct RemoteGasData {
// The exchange rate of the remote native token quoted in the local native token.
// Scaled with 10 decimals, i.e. 1e10 is "one".
uint128 tokenExchangeRate;
uint128 gasPrice;
}
function getExchangeRateAndGasPrice(uint32 _destinationDomain)
external
view
returns (uint128 tokenExchangeRate, uint128 gasPrice);
}
// File contracts/interfaces/IInterchainGasPaymaster.sol
pragma solidity >=0.6.11;
/**
* @title IInterchainGasPaymaster
* @notice Manages payments on a source chain to cover gas costs of relaying
* messages to destination chains.
*/
interface IInterchainGasPaymaster {
/**
* @notice Emitted when a payment is made for a message's gas costs.
* @param messageId The ID of the message to pay for.
* @param destinationDomain The domain of the destination chain.
* @param gasAmount The amount of destination gas paid for.
* @param payment The amount of native tokens paid.
*/
event GasPayment(
bytes32 indexed messageId,
uint32 indexed destinationDomain,
uint256 gasAmount,
uint256 payment
);
function payForGas(
bytes32 _messageId,
uint32 _destinationDomain,
uint256 _gasAmount,
address _refundAddress
) external payable;
function quoteGasPayment(uint32 _destinationDomain, uint256 _gasAmount)
external
view
returns (uint256);
}
// File contracts/libs/Indexed.sol
pragma solidity >=0.8.0;
contract Indexed {
uint256 public immutable deployedBlock;
constructor() {
deployedBlock = block.number;
}
}
// File contracts/hooks/igp/InterchainGasPaymaster.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title InterchainGasPaymaster
* @notice Manages payments on a source chain to cover gas costs of relaying
* messages to destination chains and includes the gas overhead per destination
* @dev The intended use of this contract is to store overhead gas amounts for destination
* domains, e.g. Mailbox and ISM gas usage, such that users of this IGP are only required
* to specify the gas amount used by their own applications.
*/
contract InterchainGasPaymaster is
IInterchainGasPaymaster,
AbstractPostDispatchHook,
IGasOracle,
Indexed,
OwnableUpgradeable
{
using Address for address payable;
using Message for bytes;
using StandardHookMetadata for bytes;
// ============ Constants ============
/// @notice The scale of gas oracle token exchange rates.
uint256 internal constant TOKEN_EXCHANGE_RATE_SCALE = 1e10;
/// @notice default for user call if metadata not provided
uint256 internal immutable DEFAULT_GAS_USAGE = 50_000;
// ============ Public Storage ============
/// @notice Destination domain => gas oracle and overhead gas amount.
mapping(uint32 => DomainGasConfig) public destinationGasConfigs;
/// @notice The benficiary that can receive native tokens paid into this contract.
address public beneficiary;
// ============ Events ============
/**
* @notice Emitted when the gas oracle for a remote domain is set.
* @param remoteDomain The remote domain.
* @param gasOracle The gas oracle.
* @param gasOverhead The destination gas overhead.
*/
event DestinationGasConfigSet(
uint32 remoteDomain,
address gasOracle,
uint96 gasOverhead
);
/**
* @notice Emitted when the beneficiary is set.
* @param beneficiary The new beneficiary.
*/
event BeneficiarySet(address beneficiary);
struct DomainGasConfig {
IGasOracle gasOracle;
uint96 gasOverhead;
}
struct GasParam {
uint32 remoteDomain;
DomainGasConfig config;
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.INTERCHAIN_GAS_PAYMASTER);
}
/**
* @param _owner The owner of the contract.
* @param _beneficiary The beneficiary.
*/
function initialize(address _owner, address _beneficiary)
public
initializer
{
__Ownable_init();
_transferOwnership(_owner);
_setBeneficiary(_beneficiary);
}
/**
* @notice Transfers the entire native token balance to the beneficiary.
* @dev The beneficiary must be able to receive native tokens.
*/
function claim() external {
// Transfer the entire balance to the beneficiary.
(bool success, ) = beneficiary.call{value: address(this).balance}("");
require(success, "IGP: claim failed");
}
/**
* @notice Sets the gas oracles for remote domains specified in the config array.
* @param _configs An array of configs including the remote domain and gas oracles to set.
*/
function setDestinationGasConfigs(GasParam[] calldata _configs)
external
onlyOwner
{
uint256 _len = _configs.length;
for (uint256 i = 0; i < _len; i++) {
_setDestinationGasConfig(
_configs[i].remoteDomain,
_configs[i].config.gasOracle,
_configs[i].config.gasOverhead
);
}
}
/**
* @notice Sets the beneficiary.
* @param _beneficiary The new beneficiary.
*/
function setBeneficiary(address _beneficiary) external onlyOwner {
_setBeneficiary(_beneficiary);
}
// ============ Public Functions ============
/**
* @notice Deposits msg.value as a payment for the relaying of a message
* to its destination chain.
* @dev Overpayment will result in a refund of native tokens to the _refundAddress.
* Callers should be aware that this may present reentrancy issues.
* @param _messageId The ID of the message to pay for.
* @param _destinationDomain The domain of the message's destination chain.
* @param _gasLimit The amount of destination gas to pay for.
* @param _refundAddress The address to refund any overpayment to.
*/
function payForGas(
bytes32 _messageId,
uint32 _destinationDomain,
uint256 _gasLimit,
address _refundAddress
) public payable override {
uint256 _requiredPayment = quoteGasPayment(
_destinationDomain,
_gasLimit
);
require(
msg.value >= _requiredPayment,
"IGP: insufficient interchain gas payment"
);
uint256 _overpayment = msg.value - _requiredPayment;
if (_overpayment > 0) {
require(_refundAddress != address(0), "no refund address");
payable(_refundAddress).sendValue(_overpayment);
}
emit GasPayment(
_messageId,
_destinationDomain,
_gasLimit,
_requiredPayment
);
}
/**
* @notice Quotes the amount of native tokens to pay for interchain gas.
* @param _destinationDomain The domain of the message's destination chain.
* @param _gasLimit The amount of destination gas to pay for.
* @return The amount of native tokens required to pay for interchain gas.
*/
function quoteGasPayment(uint32 _destinationDomain, uint256 _gasLimit)
public
view
virtual
override
returns (uint256)
{
// Get the gas data for the destination domain.
(
uint128 _tokenExchangeRate,
uint128 _gasPrice
) = getExchangeRateAndGasPrice(_destinationDomain);
// The total cost quoted in destination chain's native token.
uint256 _destinationGasCost = _gasLimit * uint256(_gasPrice);
// Convert to the local native token.
return
(_destinationGasCost * _tokenExchangeRate) /
TOKEN_EXCHANGE_RATE_SCALE;
}
/**
* @notice Gets the token exchange rate and gas price from the configured gas oracle
* for a given destination domain.
* @param _destinationDomain The destination domain.
* @return tokenExchangeRate The exchange rate of the remote native token quoted in the local native token.
* @return gasPrice The gas price on the remote chain.
*/
function getExchangeRateAndGasPrice(uint32 _destinationDomain)
public
view
override
returns (uint128 tokenExchangeRate, uint128 gasPrice)
{
IGasOracle _gasOracle = destinationGasConfigs[_destinationDomain]
.gasOracle;
require(
address(_gasOracle) != address(0),
string.concat(
"Configured IGP doesn't support domain ",
Strings.toString(_destinationDomain)
)
);
return _gasOracle.getExchangeRateAndGasPrice(_destinationDomain);
}
/**
* @notice Returns the stored destinationGasOverhead added to the _gasLimit.
* @dev If there is no stored destinationGasOverhead, 0 is used. This is useful in the case
* the ISM deployer wants to subsidize the overhead gas cost. Then, can specify the gas oracle
* they want to use with the destination domain, but set the overhead to 0.
* @param _destinationDomain The domain of the message's destination chain.
* @param _gasLimit The amount of destination gas to pay for. This is only for application gas usage as
* the gas usage for the mailbox and the ISM is already accounted in the DomainGasConfig.gasOverhead
*/
function destinationGasLimit(uint32 _destinationDomain, uint256 _gasLimit)
public
view
returns (uint256)
{
return
uint256(destinationGasConfigs[_destinationDomain].gasOverhead) +
_gasLimit;
}
// ============ Internal Functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
{
payForGas(
message.id(),
message.destination(),
destinationGasLimit(
message.destination(),
metadata.gasLimit(DEFAULT_GAS_USAGE)
),
metadata.refundAddress(message.senderAddress())
);
}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(bytes calldata metadata, bytes calldata message)
internal
view
override
returns (uint256)
{
return
quoteGasPayment(
message.destination(),
destinationGasLimit(
message.destination(),
metadata.gasLimit(DEFAULT_GAS_USAGE)
)
);
}
/**
* @notice Sets the beneficiary.
* @param _beneficiary The new beneficiary.
*/
function _setBeneficiary(address _beneficiary) internal {
beneficiary = _beneficiary;
emit BeneficiarySet(_beneficiary);
}
/**
* @notice Sets the gas oracle and destination gas overhead for a remote domain.
* @param _remoteDomain The remote domain.
* @param _gasOracle The gas oracle.
* @param _gasOverhead The destination gas overhead.
*/
function _setDestinationGasConfig(
uint32 _remoteDomain,
IGasOracle _gasOracle,
uint96 _gasOverhead
) internal {
destinationGasConfigs[_remoteDomain] = DomainGasConfig(
_gasOracle,
_gasOverhead
);
emit DestinationGasConfigSet(
_remoteDomain,
address(_gasOracle),
_gasOverhead
);
}
}
// File contracts/hooks/igp/StorageGasOracle.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @notice A gas oracle that uses data stored within the contract.
* @dev This contract is intended to be owned by an address that will
* update the stored remote gas data.
*/
contract StorageGasOracle is IGasOracle, Ownable {
// ============ Public Storage ============
/// @notice Keyed by remote domain, gas data on that remote domain.
mapping(uint32 => IGasOracle.RemoteGasData) public remoteGasData;
// ============ Events ============
/**
* @notice Emitted when an entry in `remoteGasData` is set.
* @param remoteDomain The remote domain in which the gas data was set for.
* @param tokenExchangeRate The exchange rate of the remote native token quoted in the local native token.
* @param gasPrice The gas price on the remote chain.
*/
event RemoteGasDataSet(
uint32 indexed remoteDomain,
uint128 tokenExchangeRate,
uint128 gasPrice
);
struct RemoteGasDataConfig {
uint32 remoteDomain;
uint128 tokenExchangeRate;
uint128 gasPrice;
}
// ============ External Functions ============
/**
* @notice Returns the stored `remoteGasData` for the `_destinationDomain`.
* @param _destinationDomain The destination domain.
* @return tokenExchangeRate The exchange rate of the remote native token quoted in the local native token.
* @return gasPrice The gas price on the remote chain.
*/
function getExchangeRateAndGasPrice(uint32 _destinationDomain)
external
view
override
returns (uint128 tokenExchangeRate, uint128 gasPrice)
{
// Intentionally allow unset / zero values
IGasOracle.RemoteGasData memory _data = remoteGasData[
_destinationDomain
];
return (_data.tokenExchangeRate, _data.gasPrice);
}
/**
* @notice Sets the remote gas data for many remotes at a time.
* @param _configs The configs to use when setting the remote gas data.
*/
function setRemoteGasDataConfigs(RemoteGasDataConfig[] calldata _configs)
external
onlyOwner
{
uint256 _len = _configs.length;
for (uint256 i = 0; i < _len; i++) {
_setRemoteGasData(_configs[i]);
}
}
/**
* @notice Sets the remote gas data using the values in `_config`.
* @param _config The config to use when setting the remote gas data.
*/
function setRemoteGasData(RemoteGasDataConfig calldata _config)
external
onlyOwner
{
_setRemoteGasData(_config);
}
// ============ Internal functions ============
/**
* @notice Sets the remote gas data using the values in `_config`.
* @param _config The config to use when setting the remote gas data.
*/
function _setRemoteGasData(RemoteGasDataConfig calldata _config) internal {
remoteGasData[_config.remoteDomain] = IGasOracle.RemoteGasData({
tokenExchangeRate: _config.tokenExchangeRate,
gasPrice: _config.gasPrice
});
emit RemoteGasDataSet(
_config.remoteDomain,
_config.tokenExchangeRate,
_config.gasPrice
);
}
}
// File contracts/libs/Merkle.sol
pragma solidity >=0.6.11;
// work based on eth2 deposit contract, which is used under CC0-1.0
/**
* @title MerkleLib
* @author Celo Labs Inc.
* @notice An incremental merkle tree modeled on the eth2 deposit contract.
**/
library MerkleLib {
uint256 internal constant TREE_DEPTH = 32;
uint256 internal constant MAX_LEAVES = 2**TREE_DEPTH - 1;
/**
* @notice Struct representing incremental merkle tree. Contains current
* branch and the number of inserted leaves in the tree.
**/
struct Tree {
bytes32[TREE_DEPTH] branch;
uint256 count;
}
/**
* @notice Inserts `_node` into merkle tree
* @dev Reverts if tree is full
* @param _node Element to insert into tree
**/
function insert(Tree storage _tree, bytes32 _node) internal {
require(_tree.count < MAX_LEAVES, "merkle tree full");
_tree.count += 1;
uint256 size = _tree.count;
for (uint256 i = 0; i < TREE_DEPTH; i++) {
if ((size & 1) == 1) {
_tree.branch[i] = _node;
return;
}
_node = keccak256(abi.encodePacked(_tree.branch[i], _node));
size /= 2;
}
// As the loop should always end prematurely with the `return` statement,
// this code should be unreachable. We assert `false` just to be safe.
assert(false);
}
/**
* @notice Calculates and returns`_tree`'s current root given array of zero
* hashes
* @param _zeroes Array of zero hashes
* @return _current Calculated root of `_tree`
**/
function rootWithCtx(Tree storage _tree, bytes32[TREE_DEPTH] memory _zeroes)
internal
view
returns (bytes32 _current)
{
uint256 _index = _tree.count;
for (uint256 i = 0; i < TREE_DEPTH; i++) {
uint256 _ithBit = (_index >> i) & 0x01;
bytes32 _next = _tree.branch[i];
if (_ithBit == 1) {
_current = keccak256(abi.encodePacked(_next, _current));
} else {
_current = keccak256(abi.encodePacked(_current, _zeroes[i]));
}
}
}
/// @notice Calculates and returns`_tree`'s current root
function root(Tree storage _tree) internal view returns (bytes32) {
return rootWithCtx(_tree, zeroHashes());
}
/// @notice Returns array of TREE_DEPTH zero hashes
/// @return _zeroes Array of TREE_DEPTH zero hashes
function zeroHashes()
internal
pure
returns (bytes32[TREE_DEPTH] memory _zeroes)
{
_zeroes[0] = Z_0;
_zeroes[1] = Z_1;
_zeroes[2] = Z_2;
_zeroes[3] = Z_3;
_zeroes[4] = Z_4;
_zeroes[5] = Z_5;
_zeroes[6] = Z_6;
_zeroes[7] = Z_7;
_zeroes[8] = Z_8;
_zeroes[9] = Z_9;
_zeroes[10] = Z_10;
_zeroes[11] = Z_11;
_zeroes[12] = Z_12;
_zeroes[13] = Z_13;
_zeroes[14] = Z_14;
_zeroes[15] = Z_15;
_zeroes[16] = Z_16;
_zeroes[17] = Z_17;
_zeroes[18] = Z_18;
_zeroes[19] = Z_19;
_zeroes[20] = Z_20;
_zeroes[21] = Z_21;
_zeroes[22] = Z_22;
_zeroes[23] = Z_23;
_zeroes[24] = Z_24;
_zeroes[25] = Z_25;
_zeroes[26] = Z_26;
_zeroes[27] = Z_27;
_zeroes[28] = Z_28;
_zeroes[29] = Z_29;
_zeroes[30] = Z_30;
_zeroes[31] = Z_31;
}
/**
* @notice Calculates and returns the merkle root for the given leaf
* `_item`, a merkle branch, and the index of `_item` in the tree.
* @param _item Merkle leaf
* @param _branch Merkle proof
* @param _index Index of `_item` in tree
* @return _current Calculated merkle root
**/
function branchRoot(
bytes32 _item,
bytes32[TREE_DEPTH] memory _branch, // cheaper than calldata indexing
uint256 _index
) internal pure returns (bytes32 _current) {
_current = _item;
for (uint256 i = 0; i < TREE_DEPTH; i++) {
uint256 _ithBit = (_index >> i) & 0x01;
// cheaper than calldata indexing _branch[i*32:(i+1)*32];
bytes32 _next = _branch[i];
if (_ithBit == 1) {
_current = keccak256(abi.encodePacked(_next, _current));
} else {
_current = keccak256(abi.encodePacked(_current, _next));
}
}
}
// keccak256 zero hashes
bytes32 internal constant Z_0 =
hex"0000000000000000000000000000000000000000000000000000000000000000";
bytes32 internal constant Z_1 =
hex"ad3228b676f7d3cd4284a5443f17f1962b36e491b30a40b2405849e597ba5fb5";
bytes32 internal constant Z_2 =
hex"b4c11951957c6f8f642c4af61cd6b24640fec6dc7fc607ee8206a99e92410d30";
bytes32 internal constant Z_3 =
hex"21ddb9a356815c3fac1026b6dec5df3124afbadb485c9ba5a3e3398a04b7ba85";
bytes32 internal constant Z_4 =
hex"e58769b32a1beaf1ea27375a44095a0d1fb664ce2dd358e7fcbfb78c26a19344";
bytes32 internal constant Z_5 =
hex"0eb01ebfc9ed27500cd4dfc979272d1f0913cc9f66540d7e8005811109e1cf2d";
bytes32 internal constant Z_6 =
hex"887c22bd8750d34016ac3c66b5ff102dacdd73f6b014e710b51e8022af9a1968";
bytes32 internal constant Z_7 =
hex"ffd70157e48063fc33c97a050f7f640233bf646cc98d9524c6b92bcf3ab56f83";
bytes32 internal constant Z_8 =
hex"9867cc5f7f196b93bae1e27e6320742445d290f2263827498b54fec539f756af";
bytes32 internal constant Z_9 =
hex"cefad4e508c098b9a7e1d8feb19955fb02ba9675585078710969d3440f5054e0";
bytes32 internal constant Z_10 =
hex"f9dc3e7fe016e050eff260334f18a5d4fe391d82092319f5964f2e2eb7c1c3a5";
bytes32 internal constant Z_11 =
hex"f8b13a49e282f609c317a833fb8d976d11517c571d1221a265d25af778ecf892";
bytes32 internal constant Z_12 =
hex"3490c6ceeb450aecdc82e28293031d10c7d73bf85e57bf041a97360aa2c5d99c";
bytes32 internal constant Z_13 =
hex"c1df82d9c4b87413eae2ef048f94b4d3554cea73d92b0f7af96e0271c691e2bb";
bytes32 internal constant Z_14 =
hex"5c67add7c6caf302256adedf7ab114da0acfe870d449a3a489f781d659e8becc";
bytes32 internal constant Z_15 =
hex"da7bce9f4e8618b6bd2f4132ce798cdc7a60e7e1460a7299e3c6342a579626d2";
bytes32 internal constant Z_16 =
hex"2733e50f526ec2fa19a22b31e8ed50f23cd1fdf94c9154ed3a7609a2f1ff981f";
bytes32 internal constant Z_17 =
hex"e1d3b5c807b281e4683cc6d6315cf95b9ade8641defcb32372f1c126e398ef7a";
bytes32 internal constant Z_18 =
hex"5a2dce0a8a7f68bb74560f8f71837c2c2ebbcbf7fffb42ae1896f13f7c7479a0";
bytes32 internal constant Z_19 =
hex"b46a28b6f55540f89444f63de0378e3d121be09e06cc9ded1c20e65876d36aa0";
bytes32 internal constant Z_20 =
hex"c65e9645644786b620e2dd2ad648ddfcbf4a7e5b1a3a4ecfe7f64667a3f0b7e2";
bytes32 internal constant Z_21 =
hex"f4418588ed35a2458cffeb39b93d26f18d2ab13bdce6aee58e7b99359ec2dfd9";
bytes32 internal constant Z_22 =
hex"5a9c16dc00d6ef18b7933a6f8dc65ccb55667138776f7dea101070dc8796e377";
bytes32 internal constant Z_23 =
hex"4df84f40ae0c8229d0d6069e5c8f39a7c299677a09d367fc7b05e3bc380ee652";
bytes32 internal constant Z_24 =
hex"cdc72595f74c7b1043d0e1ffbab734648c838dfb0527d971b602bc216c9619ef";
bytes32 internal constant Z_25 =
hex"0abf5ac974a1ed57f4050aa510dd9c74f508277b39d7973bb2dfccc5eeb0618d";
bytes32 internal constant Z_26 =
hex"b8cd74046ff337f0a7bf2c8e03e10f642c1886798d71806ab1e888d9e5ee87d0";
bytes32 internal constant Z_27 =
hex"838c5655cb21c6cb83313b5a631175dff4963772cce9108188b34ac87c81c41e";
bytes32 internal constant Z_28 =
hex"662ee4dd2dd7b2bc707961b1e646c4047669dcb6584f0d8d770daf5d7e7deb2e";
bytes32 internal constant Z_29 =
hex"388ab20e2573d171a88108e79d820e98f26c0b84aa8b2f4aa4968dbb818ea322";
bytes32 internal constant Z_30 =
hex"93237c50ba75ee485f4c22adf2f741400bdf8d6a9cc7df7ecae576221665d735";
bytes32 internal constant Z_31 =
hex"8448818bb4ae4562849e949e17ac16e0be16688e156b5cf15e098c627c0056a9";
}
// File contracts/hooks/MerkleTreeHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
contract MerkleTreeHook is AbstractPostDispatchHook, MailboxClient, Indexed {
using Message for bytes;
using MerkleLib for MerkleLib.Tree;
using StandardHookMetadata for bytes;
// An incremental merkle tree used to store outbound message IDs.
MerkleLib.Tree internal _tree;
event InsertedIntoTree(bytes32 messageId, uint32 index);
constructor(address _mailbox) MailboxClient(_mailbox) {}
// count cannot exceed 2**TREE_DEPTH, see MerkleLib.sol
function count() public view returns (uint32) {
return uint32(_tree.count);
}
function root() public view returns (bytes32) {
return _tree.root();
}
function tree() public view returns (MerkleLib.Tree memory) {
return _tree;
}
function latestCheckpoint() external view returns (bytes32, uint32) {
return (root(), count() - 1);
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.MERKLE_TREE);
}
// ============ Internal Functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(
bytes calldata,
/*metadata*/
bytes calldata message
) internal override {
require(msg.value == 0, "MerkleTreeHook: no value expected");
// ensure messages which were not dispatched are not inserted into the tree
bytes32 id = message.id();
require(_isLatestDispatched(id), "message not dispatching");
uint32 index = count();
_tree.insert(id);
emit InsertedIntoTree(id, index);
}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(
bytes calldata,
/*metadata*/
bytes calldata /*message*/
) internal pure override returns (uint256) {
return 0;
}
}
// File contracts/interfaces/optimism/ICrossDomainMessenger.sol
pragma solidity >=0.8.0;
/**
* @title ICrossDomainMessenger interface for bedrock update
* @dev eth-optimism's version uses strict 0.8.15 which we don't want to restrict to
*/
interface ICrossDomainMessenger {
/**
* Sends a cross domain message to the target messenger.
* @param _target Target contract address.
* @param _message Message to send to the target.
* @param _gasLimit Gas limit for the provided message.
*/
function sendMessage(
address _target,
bytes calldata _message,
uint32 _gasLimit
) external payable;
function relayMessage(
uint256 _nonce,
address _sender,
address _target,
uint256 _value,
uint256 _minGasLimit,
bytes calldata _message
) external payable;
/*************
* Variables *
*************/
function xDomainMessageSender() external view returns (address);
}
interface IL2CrossDomainMessenger is ICrossDomainMessenger {
function messageNonce() external view returns (uint256);
}
// File contracts/hooks/OPStackHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title OPStackHook
* @notice Message hook to inform the OPStackIsm of messages published through
* the native OPStack bridge.
* @notice This works only for L1 -> L2 messages.
*/
contract OPStackHook is AbstractMessageIdAuthHook {
using StandardHookMetadata for bytes;
// ============ Constants ============
/// @notice messenger contract specified by the rollup
ICrossDomainMessenger public immutable l1Messenger;
// Gas limit for sending messages to L2
// First 1.92e6 gas is provided by Optimism, see more here:
// https://community.optimism.io/docs/developers/bridge/messaging/#for-l1-%E2%87%92-l2-transactions
uint32 internal constant GAS_LIMIT = 1_920_000;
// ============ Constructor ============
constructor(
address _mailbox,
uint32 _destinationDomain,
bytes32 _ism,
address _l1Messenger
) AbstractMessageIdAuthHook(_mailbox, _destinationDomain, _ism) {
require(
Address.isContract(_l1Messenger),
"OPStackHook: invalid messenger"
);
l1Messenger = ICrossDomainMessenger(_l1Messenger);
}
// ============ Internal functions ============
function _quoteDispatch(bytes calldata, bytes calldata)
internal
pure
override
returns (uint256)
{
return 0; // gas subsidized by the L2
}
/// @inheritdoc AbstractMessageIdAuthHook
function _sendMessageId(bytes calldata metadata, bytes memory payload)
internal
override
{
require(
metadata.msgValue(0) < 2**255,
"OPStackHook: msgValue must be less than 2 ** 255"
);
l1Messenger.sendMessage{value: metadata.msgValue(0)}(
TypeCasts.bytes32ToAddress(ism),
payload,
GAS_LIMIT
);
}
}
// File contracts/hooks/PausableHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
contract PausableHook is AbstractPostDispatchHook, Ownable, Pausable {
using StandardHookMetadata for bytes;
// ============ External functions ============
function pause() external onlyOwner {
_pause();
}
function unpause() external onlyOwner {
_unpause();
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.PAUSABLE);
}
// ============ Internal functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
whenNotPaused
{}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(bytes calldata, bytes calldata)
internal
pure
override
returns (uint256)
{
return 0;
}
}
// File contracts/hooks/routing/DomainRoutingHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title DomainRoutingHook
* @notice Delegates to a hook based on the destination domain of the message.
*/
contract DomainRoutingHook is AbstractPostDispatchHook, MailboxClient {
using Strings for uint32;
using Message for bytes;
struct HookConfig {
uint32 destination;
address hook;
}
mapping(uint32 => IPostDispatchHook) public hooks;
constructor(address _mailbox, address _owner) MailboxClient(_mailbox) {
_transferOwnership(_owner);
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure virtual override returns (uint8) {
return uint8(IPostDispatchHook.Types.ROUTING);
}
function setHook(uint32 _destination, address _hook) public onlyOwner {
hooks[_destination] = IPostDispatchHook(_hook);
}
function setHooks(HookConfig[] calldata configs) external onlyOwner {
for (uint256 i = 0; i < configs.length; i++) {
setHook(configs[i].destination, configs[i].hook);
}
}
function supportsMetadata(bytes calldata)
public
pure
virtual
override
returns (bool)
{
// routing hook does not care about metadata shape
return true;
}
// ============ Internal Functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
virtual
override
{
_getConfiguredHook(message).postDispatch{value: msg.value}(
metadata,
message
);
}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(bytes calldata metadata, bytes calldata message)
internal
view
virtual
override
returns (uint256)
{
return _getConfiguredHook(message).quoteDispatch(metadata, message);
}
function _getConfiguredHook(bytes calldata message)
internal
view
virtual
returns (IPostDispatchHook hook)
{
hook = hooks[message.destination()];
require(
address(hook) != address(0),
string.concat(
"No hook configured for destination: ",
message.destination().toString()
)
);
}
}
// File contracts/hooks/routing/DestinationRecipientRoutingHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
contract DestinationRecipientRoutingHook is DomainRoutingHook {
using Message for bytes;
/// @notice destination => recipient =>custom hook
mapping(uint32 => mapping(bytes32 => address)) public customHooks;
constructor(address mailbox, address owner)
DomainRoutingHook(mailbox, owner)
{}
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
{
address customHookPreset = customHooks[message.destination()][
message.recipient()
];
if (customHookPreset != address(0)) {
IPostDispatchHook(customHookPreset).postDispatch{value: msg.value}(
metadata,
message
);
} else {
super._postDispatch(metadata, message);
}
}
function configCustomHook(
uint32 destinationDomain,
bytes32 recipient,
address hook
) external onlyOwner {
customHooks[destinationDomain][recipient] = hook;
}
}
// File contracts/hooks/routing/FallbackDomainRoutingHook.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
/**
* @title FallbackDomainRoutingHook
* @notice Delegates to a hook based on the destination domain of the message.
* If no hook is configured for the destination domain, delegates to a fallback hook.
*/
contract FallbackDomainRoutingHook is DomainRoutingHook {
using Message for bytes;
IPostDispatchHook public immutable fallbackHook;
constructor(
address _mailbox,
address _owner,
address _fallback
) DomainRoutingHook(_mailbox, _owner) {
fallbackHook = IPostDispatchHook(_fallback);
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.FALLBACK_ROUTING);
}
// ============ Internal Functions ============
function _getConfiguredHook(bytes calldata message)
internal
view
override
returns (IPostDispatchHook)
{
IPostDispatchHook _hook = hooks[message.destination()];
if (address(_hook) == address(0)) {
_hook = fallbackHook;
}
return _hook;
}
}
// File contracts/hooks/StaticProtocolFee.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title StaticProtocolFee
* @notice Collects a static protocol fee from the sender.
*/
contract StaticProtocolFee is AbstractPostDispatchHook, Ownable {
using StandardHookMetadata for bytes;
using Address for address payable;
using Message for bytes;
// ============ Constants ============
/// @notice The maximum protocol fee that can be set.
uint256 public immutable MAX_PROTOCOL_FEE;
// ============ Public Storage ============
/// @notice The current protocol fee.
uint256 public protocolFee;
/// @notice The beneficiary of protocol fees.
address public beneficiary;
// ============ Constructor ============
constructor(
uint256 _maxProtocolFee,
uint256 _protocolFee,
address _beneficiary,
address _owner
) {
MAX_PROTOCOL_FEE = _maxProtocolFee;
_setProtocolFee(_protocolFee);
_setBeneficiary(_beneficiary);
_transferOwnership(_owner);
}
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.PROTOCOL_FEE);
}
/**
* @notice Sets the protocol fee.
* @param _protocolFee The new protocol fee.
*/
function setProtocolFee(uint256 _protocolFee) external onlyOwner {
_setProtocolFee(_protocolFee);
}
/**
* @notice Sets the beneficiary of protocol fees.
* @param _beneficiary The new beneficiary.
*/
function setBeneficiary(address _beneficiary) external onlyOwner {
_setBeneficiary(_beneficiary);
}
/**
* @notice Collects protocol fees from the contract.
*/
function collectProtocolFees() external {
payable(beneficiary).sendValue(address(this).balance);
}
// ============ Internal Functions ============
/// @inheritdoc AbstractPostDispatchHook
function _postDispatch(bytes calldata metadata, bytes calldata message)
internal
override
{
require(
msg.value >= protocolFee,
"StaticProtocolFee: insufficient protocol fee"
);
uint256 refund = msg.value - protocolFee;
if (refund > 0) {
payable(metadata.refundAddress(message.senderAddress())).sendValue(
refund
);
}
}
/// @inheritdoc AbstractPostDispatchHook
function _quoteDispatch(bytes calldata, bytes calldata)
internal
view
override
returns (uint256)
{
return protocolFee;
}
/**
* @notice Sets the protocol fee.
* @param _protocolFee The new protocol fee.
*/
function _setProtocolFee(uint256 _protocolFee) internal {
require(
_protocolFee <= MAX_PROTOCOL_FEE,
"StaticProtocolFee: exceeds max protocol fee"
);
protocolFee = _protocolFee;
}
/**
* @notice Sets the beneficiary of protocol fees.
* @param _beneficiary The new beneficiary.
*/
function _setBeneficiary(address _beneficiary) internal {
require(
_beneficiary != address(0),
"StaticProtocolFee: invalid beneficiary"
);
beneficiary = _beneficiary;
}
}
// File contracts/interfaces/isms/IAggregationIsm.sol
pragma solidity >=0.6.11;
interface IAggregationIsm is IInterchainSecurityModule {
/**
* @notice Returns the set of modules responsible for verifying _message
* and the number of modules that must verify
* @dev Can change based on the content of _message
* @param _message Hyperlane formatted interchain message
* @return modules The array of ISM addresses
* @return threshold The number of modules needed to verify
*/
function modulesAndThreshold(bytes calldata _message)
external
view
returns (address[] memory modules, uint8 threshold);
}
// File contracts/interfaces/isms/ICcipReadIsm.sol
pragma solidity >=0.8.0;
interface ICcipReadIsm is IInterchainSecurityModule {
/// @dev https://eips.ethereum.org/EIPS/eip-3668
/// @param sender the address of the contract making the call, usually address(this)
/// @param urls the URLs to query for offchain data
/// @param callData context needed for offchain service to service request
/// @param callbackFunction function selector to call with offchain information
/// @param extraData additional passthrough information to call callbackFunction with
error OffchainLookup(
address sender,
string[] urls,
bytes callData,
bytes4 callbackFunction,
bytes extraData
);
/**
* @notice Reverts with the data needed to query information offchain
* and be submitted via the origin mailbox
* @dev See https://eips.ethereum.org/EIPS/eip-3668 for more information
* @param _message data that will help construct the offchain query
*/
function getOffchainVerifyInfo(bytes calldata _message) external view;
}
// File contracts/interfaces/isms/IMultisigIsm.sol
pragma solidity >=0.6.11;
interface IMultisigIsm is IInterchainSecurityModule {
/**
* @notice Returns the set of validators responsible for verifying _message
* and the number of signatures required
* @dev Can change based on the content of _message
* @param _message Hyperlane formatted interchain message
* @return validators The array of validator addresses
* @return threshold The number of validator signatures needed
*/
function validatorsAndThreshold(bytes calldata _message)
external
view
returns (address[] memory validators, uint8 threshold);
}
// File contracts/interfaces/isms/IRoutingIsm.sol
pragma solidity >=0.8.0;
interface IRoutingIsm is IInterchainSecurityModule {
/**
* @notice Returns the ISM responsible for verifying _message
* @dev Can change based on the content of _message
* @param _message Formatted Hyperlane message (see Message.sol).
* @return module The ISM to use to verify _message
*/
function route(bytes calldata _message)
external
view
returns (IInterchainSecurityModule);
}
// File contracts/isms/libs/AggregationIsmMetadata.sol
pragma solidity >=0.8.0;
/**
* Format of metadata:
*
* [????:????] Metadata start/end uint32 ranges, packed as uint64
* [????:????] ISM metadata, packed encoding
*/
library AggregationIsmMetadata {
uint256 private constant RANGE_SIZE = 4;
/**
* @notice Returns whether or not metadata was provided for the ISM at
* `_index`
* @dev Callers must ensure _index is less than the number of metadatas
* provided
* @param _metadata Encoded Aggregation ISM metadata
* @param _index The index of the ISM to check for metadata for
* @return Whether or not metadata was provided for the ISM at `_index`
*/
function hasMetadata(bytes calldata _metadata, uint8 _index)
internal
pure
returns (bool)
{
(uint32 _start, ) = _metadataRange(_metadata, _index);
return _start > 0;
}
/**
* @notice Returns the metadata provided for the ISM at `_index`
* @dev Callers must ensure _index is less than the number of metadatas
* provided
* @dev Callers must ensure `hasMetadata(_metadata, _index)`
* @param _metadata Encoded Aggregation ISM metadata
* @param _index The index of the ISM to return metadata for
* @return The metadata provided for the ISM at `_index`
*/
function metadataAt(bytes calldata _metadata, uint8 _index)
internal
pure
returns (bytes calldata)
{
(uint32 _start, uint32 _end) = _metadataRange(_metadata, _index);
return _metadata[_start:_end];
}
/**
* @notice Returns the range of the metadata provided for the ISM at
* `_index`, or zeroes if not provided
* @dev Callers must ensure _index is less than the number of metadatas
* provided
* @param _metadata Encoded Aggregation ISM metadata
* @param _index The index of the ISM to return metadata range for
* @return The range of the metadata provided for the ISM at `_index`, or
* zeroes if not provided
*/
function _metadataRange(bytes calldata _metadata, uint8 _index)
private
pure
returns (uint32, uint32)
{
uint256 _start = (uint32(_index) * RANGE_SIZE * 2);
uint256 _mid = _start + RANGE_SIZE;
uint256 _end = _mid + RANGE_SIZE;
return (
uint32(bytes4(_metadata[_start:_mid])),
uint32(bytes4(_metadata[_mid:_end]))
);
}
}
// File contracts/isms/aggregation/AbstractAggregationIsm.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
// ============ Internal Imports ============
/**
* @title AggregationIsm
* @notice Manages per-domain m-of-n ISM sets that are used to verify
* interchain messages.
*/
abstract contract AbstractAggregationIsm is IAggregationIsm {
// ============ Constants ============
// solhint-disable-next-line const-name-snakecase
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.AGGREGATION);
// ============ Virtual Functions ============
// ======= OVERRIDE THESE TO IMPLEMENT =======
/**
* @notice Returns the set of ISMs responsible for verifying _message
* and the number of ISMs that must verify
* @dev Can change based on the content of _message
* @param _message Hyperlane formatted interchain message
* @return modules The array of ISM addresses
* @return threshold The number of ISMs needed to verify
*/
function modulesAndThreshold(bytes calldata _message)
public
view
virtual
returns (address[] memory, uint8);
// ============ Public Functions ============
/**
* @notice Requires that m-of-n ISMs verify the provided interchain message.
* @param _metadata ABI encoded module metadata (see AggregationIsmMetadata.sol)
* @param _message Formatted Hyperlane message (see Message.sol).
*/
function verify(bytes calldata _metadata, bytes calldata _message)
public
returns (bool)
{
(address[] memory _isms, uint8 _threshold) = modulesAndThreshold(
_message
);
uint256 _count = _isms.length;
for (uint8 i = 0; i < _count; i++) {
if (!AggregationIsmMetadata.hasMetadata(_metadata, i)) continue;
IInterchainSecurityModule _ism = IInterchainSecurityModule(
_isms[i]
);
require(
_ism.verify(
AggregationIsmMetadata.metadataAt(_metadata, i),
_message
),
"!verify"
);
_threshold -= 1;
}
require(_threshold == 0, "!threshold");
return true;
}
}
// File contracts/isms/aggregation/StaticAggregationIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title StaticAggregationIsm
* @notice Manages per-domain m-of-n ISM sets that are used to verify
* interchain messages.
*/
contract StaticAggregationIsm is AbstractAggregationIsm {
// ============ Public Functions ============
/**
* @notice Returns the set of ISMs responsible for verifying _message
* and the number of ISMs that must verify
* @dev Can change based on the content of _message
* @return modules The array of ISM addresses
* @return threshold The number of ISMs needed to verify
*/
function modulesAndThreshold(bytes calldata)
public
view
virtual
override
returns (address[] memory, uint8)
{
return abi.decode(MetaProxy.metadata(), (address[], uint8));
}
}
// File contracts/isms/aggregation/StaticAggregationIsmFactory.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
contract StaticAggregationIsmFactory is StaticThresholdAddressSetFactory {
function _deployImplementation()
internal
virtual
override
returns (address)
{
return address(new StaticAggregationIsm());
}
}
// File contracts/isms/multisig/AbstractMultisigIsm.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
// ============ Internal Imports ============
/**
* @title MultisigIsm
* @notice Manages per-domain m-of-n Validator sets that are used to verify
* interchain messages.
* @dev See ./AbstractMerkleRootMultisigIsm.sol and ./AbstractMessageIdMultisigIsm.sol
* for concrete implementations of `digest` and `signatureAt`.
* @dev See ./StaticMultisigIsm.sol for concrete implementations.
*/
abstract contract AbstractMultisigIsm is IMultisigIsm {
// ============ Virtual Functions ============
// ======= OVERRIDE THESE TO IMPLEMENT =======
/**
* @notice Returns the set of validators responsible for verifying _message
* and the number of signatures required
* @dev Can change based on the content of _message
* @param _message Hyperlane formatted interchain message
* @return validators The array of validator addresses
* @return threshold The number of validator signatures needed
*/
function validatorsAndThreshold(bytes calldata _message)
public
view
virtual
returns (address[] memory, uint8);
/**
* @notice Returns the digest to be used for signature verification.
* @param _metadata ABI encoded module metadata
* @param _message Formatted Hyperlane message (see Message.sol).
* @return digest The digest to be signed by validators
*/
function digest(bytes calldata _metadata, bytes calldata _message)
internal
view
virtual
returns (bytes32);
/**
* @notice Returns the signature at a given index from the metadata.
* @param _metadata ABI encoded module metadata
* @param _index The index of the signature to return
* @return signature Packed encoding of signature (65 bytes)
*/
function signatureAt(bytes calldata _metadata, uint256 _index)
internal
pure
virtual
returns (bytes calldata);
// ============ Public Functions ============
/**
* @notice Requires that m-of-n validators verify a merkle root,
* and verifies a me∑rkle proof of `_message` against that root.
* @param _metadata ABI encoded module metadata
* @param _message Formatted Hyperlane message (see Message.sol).
*/
function verify(bytes calldata _metadata, bytes calldata _message)
public
view
returns (bool)
{
bytes32 _digest = digest(_metadata, _message);
(
address[] memory _validators,
uint8 _threshold
) = validatorsAndThreshold(_message);
require(_threshold > 0, "No MultisigISM threshold present for message");
uint256 _validatorCount = _validators.length;
uint256 _validatorIndex = 0;
// Assumes that signatures are ordered by validator
for (uint256 i = 0; i < _threshold; ++i) {
address _signer = ECDSA.recover(_digest, signatureAt(_metadata, i));
// Loop through remaining validators until we find a match
while (
_validatorIndex < _validatorCount &&
_signer != _validators[_validatorIndex]
) {
++_validatorIndex;
}
// Fail if we never found a match
require(_validatorIndex < _validatorCount, "!threshold");
++_validatorIndex;
}
return true;
}
}
// File contracts/isms/ccip-read/AbstractCcipReadIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title AbstractCcipReadIsm
* @notice An ISM that allows arbitrary payloads to be submitted and verified on chain
* @dev https://eips.ethereum.org/EIPS/eip-3668
* @dev The AbstractCcipReadIsm provided by Hyperlane is left intentially minimalist as
* the range of applications that could be supported by a CcipReadIsm are so broad. However
* there are few things to note when building a custom CcipReadIsm.
*
* 1. `getOffchainVerifyInfo` should revert with a `OffchainLookup` error, which encodes
* the data necessary to query for offchain information
* 2. For full CCIP Read specification compatibility, CcipReadIsm's should expose a function
* that in turn calls `process` on the configured Mailbox with the provided metadata and
* message. This functions selector should be provided as the `callbackFunction` payload
* for the OffchainLookup error
*/
abstract contract AbstractCcipReadIsm is ICcipReadIsm {
// ============ Constants ============
// solhint-disable-next-line const-name-snakecase
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.CCIP_READ);
}
// File contracts/isms/hook/ERC5164Ism.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title ERC5164Ism
* @notice Uses the generic eip-5164 standard to verify interchain messages.
*/
contract ERC5164Ism is AbstractMessageIdAuthorizedIsm {
// ============ Constants ============
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.NULL);
// corresponding 5164 executor address
address public immutable executor;
// ============ Constructor ============
constructor(address _executor) {
require(Address.isContract(_executor), "ERC5164Ism: invalid executor");
executor = _executor;
}
/**
* @notice Check if sender is authorized to message `verifyMessageId`.
*/
function _isAuthorized() internal view override returns (bool) {
return msg.sender == executor;
}
}
// File contracts/isms/hook/OPStackIsm.sol
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title OPStackIsm
* @notice Uses the native Optimism bridge to verify interchain messages.
*/
contract OPStackIsm is
CrossChainEnabledOptimism,
AbstractMessageIdAuthorizedIsm
{
// ============ Constants ============
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.NULL);
// ============ Constructor ============
constructor(address _l2Messenger) CrossChainEnabledOptimism(_l2Messenger) {
require(
Address.isContract(_l2Messenger),
"OPStackIsm: invalid L2Messenger"
);
}
// ============ Internal function ============
/**
* @notice Check if sender is authorized to message `verifyMessageId`.
*/
function _isAuthorized() internal view override returns (bool) {
return
_crossChainSender() == TypeCasts.bytes32ToAddress(authorizedHook);
}
}
// File contracts/isms/libs/MerkleRootMultisigIsmMetadata.sol
pragma solidity >=0.8.0;
/**
* Format of metadata:
* [ 0: 32] Origin merkle tree address
* [ 32: 36] Index of message ID in merkle tree
* [ 36: 68] Signed checkpoint message ID
* [ 68:1092] Merkle proof
* [1092:1096] Signed checkpoint index (computed from proof and index)
* [1096:????] Validator signatures (length := threshold * 65)
*/
library MerkleRootMultisigIsmMetadata {
uint8 private constant ORIGIN_MERKLE_TREE_OFFSET = 0;
uint8 private constant MESSAGE_INDEX_OFFSET = 32;
uint8 private constant MESSAGE_ID_OFFSET = 36;
uint8 private constant MERKLE_PROOF_OFFSET = 68;
uint16 private constant MERKLE_PROOF_LENGTH = 32 * 32;
uint16 private constant SIGNED_INDEX_OFFSET = 1092;
uint16 private constant SIGNATURES_OFFSET = 1096;
uint8 private constant SIGNATURE_LENGTH = 65;
/**
* @notice Returns the origin merkle tree hook of the signed checkpoint as bytes32.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Origin merkle tree hook of the signed checkpoint as bytes32
*/
function originMerkleTreeHook(bytes calldata _metadata)
internal
pure
returns (bytes32)
{
return
bytes32(
_metadata[ORIGIN_MERKLE_TREE_OFFSET:ORIGIN_MERKLE_TREE_OFFSET +
32]
);
}
/**
* @notice Returns the index of the message being proven.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Index of the target message in the merkle tree.
*/
function messageIndex(bytes calldata _metadata)
internal
pure
returns (uint32)
{
return
uint32(
bytes4(_metadata[MESSAGE_INDEX_OFFSET:MESSAGE_INDEX_OFFSET + 4])
);
}
/**
* @notice Returns the index of the signed checkpoint.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Index of the signed checkpoint
*/
function signedIndex(bytes calldata _metadata)
internal
pure
returns (uint32)
{
return
uint32(
bytes4(_metadata[SIGNED_INDEX_OFFSET:SIGNED_INDEX_OFFSET + 4])
);
}
/**
* @notice Returns the message ID of the signed checkpoint.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Message ID of the signed checkpoint
*/
function signedMessageId(bytes calldata _metadata)
internal
pure
returns (bytes32)
{
return bytes32(_metadata[MESSAGE_ID_OFFSET:MESSAGE_ID_OFFSET + 32]);
}
/**
* @notice Returns the merkle proof branch of the message.
* @dev This appears to be more gas efficient than returning a calldata
* slice and using that.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Merkle proof branch of the message.
*/
function proof(bytes calldata _metadata)
internal
pure
returns (bytes32[32] memory)
{
return
abi.decode(
_metadata[MERKLE_PROOF_OFFSET:MERKLE_PROOF_OFFSET +
MERKLE_PROOF_LENGTH],
(bytes32[32])
);
}
/**
* @notice Returns the validator ECDSA signature at `_index`.
* @dev Assumes signatures are sorted by validator
* @dev Assumes `_metadata` encodes `threshold` signatures.
* @dev Assumes `_index` is less than `threshold`
* @param _metadata ABI encoded Multisig ISM metadata.
* @param _index The index of the signature to return.
* @return The validator ECDSA signature at `_index`.
*/
function signatureAt(bytes calldata _metadata, uint256 _index)
internal
pure
returns (bytes calldata)
{
uint256 _start = SIGNATURES_OFFSET + (_index * SIGNATURE_LENGTH);
uint256 _end = _start + SIGNATURE_LENGTH;
return _metadata[_start:_end];
}
}
// File contracts/libs/CheckpointLib.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
library CheckpointLib {
/**
* @notice Returns the digest validators are expected to sign when signing checkpoints.
* @param _origin The origin domain of the checkpoint.
* @param _originmerkleTreeHook The address of the origin merkle tree hook as bytes32.
* @param _checkpointRoot The root of the checkpoint.
* @param _checkpointIndex The index of the checkpoint.
* @param _messageId The message ID of the checkpoint.
* @dev Message ID must match leaf content of checkpoint root at index.
* @return The digest of the checkpoint.
*/
function digest(
uint32 _origin,
bytes32 _originmerkleTreeHook,
bytes32 _checkpointRoot,
uint32 _checkpointIndex,
bytes32 _messageId
) internal pure returns (bytes32) {
bytes32 _domainHash = domainHash(_origin, _originmerkleTreeHook);
return
ECDSA.toEthSignedMessageHash(
keccak256(
abi.encodePacked(
_domainHash,
_checkpointRoot,
_checkpointIndex,
_messageId
)
)
);
}
/**
* @notice Returns the domain hash that validators are expected to use
* when signing checkpoints.
* @param _origin The origin domain of the checkpoint.
* @param _originmerkleTreeHook The address of the origin merkle tree as bytes32.
* @return The domain hash.
*/
function domainHash(uint32 _origin, bytes32 _originmerkleTreeHook)
internal
pure
returns (bytes32)
{
// Including the origin merkle tree address in the signature allows the slashing
// protocol to enroll multiple trees. Otherwise, a valid signature for
// tree A would be indistinguishable from a fraudulent signature for tree B.
// The slashing protocol should slash if validators sign attestations for
// anything other than a whitelisted tree.
return
keccak256(
abi.encodePacked(_origin, _originmerkleTreeHook, "HYPERLANE")
);
}
}
// File contracts/isms/multisig/AbstractMerkleRootMultisigIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title `AbstractMerkleRootMultisigIsm` — multi-sig ISM with the validators-censorship resistance guarantee.
* @notice This ISM allows using a newer signed checkpoint (say #33) to prove existence of an older message (#22) in the validators' MerkleTree.
* This guarantees censorship resistance as validators cannot hide a message
* by refusing to sign its checkpoint but later signing a checkpoint for a newer message.
* If validators decide to censor a message, they are left with only one option — to not produce checkpoints at all.
* Otherwise, the very next signed checkpoint (#33) can be used by any relayer to prove the previous message inclusion using this ISM.
* This is censorship resistance is missing in the sibling implementation `AbstractMessageIdMultisigIsm`,
* since it can only verify messages having the corresponding checkpoints.
* @dev Provides the default implementation of verifying signatures over a checkpoint and the message inclusion in that checkpoint.
* This abstract contract can be overridden for customizing the `validatorsAndThreshold()` (static or dynamic).
* @dev May be adapted in future to support batch message verification against a single root.
*/
abstract contract AbstractMerkleRootMultisigIsm is AbstractMultisigIsm {
using MerkleRootMultisigIsmMetadata for bytes;
using Message for bytes;
// ============ Constants ============
// solhint-disable-next-line const-name-snakecase
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.MERKLE_ROOT_MULTISIG);
/**
* @inheritdoc AbstractMultisigIsm
*/
function digest(bytes calldata _metadata, bytes calldata _message)
internal
pure
override
returns (bytes32)
{
require(
_metadata.messageIndex() <= _metadata.signedIndex(),
"Invalid merkle index metadata"
);
// We verify a merkle proof of (messageId, index) I to compute root J
bytes32 _signedRoot = MerkleLib.branchRoot(
_message.id(),
_metadata.proof(),
_metadata.messageIndex()
);
// We provide (messageId, index) J in metadata for digest derivation
return
CheckpointLib.digest(
_message.origin(),
_metadata.originMerkleTreeHook(),
_signedRoot,
_metadata.signedIndex(),
_metadata.signedMessageId()
);
}
/**
* @inheritdoc AbstractMultisigIsm
*/
function signatureAt(bytes calldata _metadata, uint256 _index)
internal
pure
virtual
override
returns (bytes calldata)
{
return _metadata.signatureAt(_index);
}
}
// File contracts/isms/libs/MessageIdMultisigIsmMetadata.sol
pragma solidity >=0.8.0;
/**
* Format of metadata:
* [ 0: 32] Origin merkle tree address
* [ 32: 64] Signed checkpoint root
* [ 64: 68] Signed checkpoint index
* [ 68:????] Validator signatures (length := threshold * 65)
*/
library MessageIdMultisigIsmMetadata {
uint8 private constant ORIGIN_MERKLE_TREE_OFFSET = 0;
uint8 private constant MERKLE_ROOT_OFFSET = 32;
uint8 private constant MERKLE_INDEX_OFFSET = 64;
uint8 private constant SIGNATURES_OFFSET = 68;
uint8 private constant SIGNATURE_LENGTH = 65;
/**
* @notice Returns the origin merkle tree hook of the signed checkpoint as bytes32.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Origin merkle tree hook of the signed checkpoint as bytes32
*/
function originMerkleTreeHook(bytes calldata _metadata)
internal
pure
returns (bytes32)
{
return
bytes32(
_metadata[ORIGIN_MERKLE_TREE_OFFSET:ORIGIN_MERKLE_TREE_OFFSET +
32]
);
}
/**
* @notice Returns the merkle root of the signed checkpoint.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Merkle root of the signed checkpoint
*/
function root(bytes calldata _metadata) internal pure returns (bytes32) {
return bytes32(_metadata[MERKLE_ROOT_OFFSET:MERKLE_ROOT_OFFSET + 32]);
}
/**
* @notice Returns the merkle index of the signed checkpoint.
* @param _metadata ABI encoded Multisig ISM metadata.
* @return Merkle index of the signed checkpoint
*/
function index(bytes calldata _metadata) internal pure returns (uint32) {
return
uint32(
bytes4(_metadata[MERKLE_INDEX_OFFSET:MERKLE_INDEX_OFFSET + 4])
);
}
/**
* @notice Returns the validator ECDSA signature at `_index`.
* @dev Assumes signatures are sorted by validator
* @dev Assumes `_metadata` encodes `threshold` signatures.
* @dev Assumes `_index` is less than `threshold`
* @param _metadata ABI encoded Multisig ISM metadata.
* @param _index The index of the signature to return.
* @return The validator ECDSA signature at `_index`.
*/
function signatureAt(bytes calldata _metadata, uint256 _index)
internal
pure
returns (bytes calldata)
{
uint256 _start = SIGNATURES_OFFSET + (_index * SIGNATURE_LENGTH);
uint256 _end = _start + SIGNATURE_LENGTH;
return _metadata[_start:_end];
}
}
// File contracts/isms/multisig/AbstractMessageIdMultisigIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title `AbstractMessageIdMultisigIsm` — multi-sig ISM for the censorship-friendly validators.
* @notice This ISM minimizes gas/performance overhead of the checkpoints verification by compromising on the censorship resistance.
* For censorship resistance consider using `AbstractMerkleRootMultisigIsm`.
* If the validators (`validatorsAndThreshold`) skip messages by not sign checkpoints for them,
* the relayers will not be able to aggregate a quorum of signatures sufficient to deliver these messages via this ISM.
* Integrations are free to choose the trade-off between the censorship resistance and the gas/processing overhead.
* @dev Provides the default implementation of verifying signatures over a checkpoint related to a specific message ID.
* This abstract contract can be customized to change the `validatorsAndThreshold()` (static or dynamic).
*/
abstract contract AbstractMessageIdMultisigIsm is AbstractMultisigIsm {
using Message for bytes;
using MessageIdMultisigIsmMetadata for bytes;
// ============ Constants ============
// solhint-disable-next-line const-name-snakecase
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.MESSAGE_ID_MULTISIG);
/**
* @inheritdoc AbstractMultisigIsm
*/
function digest(bytes calldata _metadata, bytes calldata _message)
internal
pure
override
returns (bytes32)
{
return
CheckpointLib.digest(
_message.origin(),
_metadata.originMerkleTreeHook(),
_metadata.root(),
_metadata.index(),
_message.id()
);
}
/**
* @inheritdoc AbstractMultisigIsm
*/
function signatureAt(bytes calldata _metadata, uint256 _index)
internal
pure
virtual
override
returns (bytes calldata)
{
return _metadata.signatureAt(_index);
}
}
// File contracts/isms/multisig/StaticMultisigIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title AbstractMetaProxyMultisigIsm
* @notice Manages per-domain m-of-n Validator set that is used
* to verify interchain messages.
*/
abstract contract AbstractMetaProxyMultisigIsm is AbstractMultisigIsm {
/**
* @inheritdoc AbstractMultisigIsm
*/
function validatorsAndThreshold(bytes calldata)
public
pure
override
returns (address[] memory, uint8)
{
return abi.decode(MetaProxy.metadata(), (address[], uint8));
}
}
// solhint-disable no-empty-blocks
/**
* @title StaticMerkleRootMultisigIsm
* @notice Manages per-domain m-of-n validator set that is used
* to verify interchain messages using a merkle root signature quorum
* and merkle proof of inclusion.
*/
contract StaticMerkleRootMultisigIsm is
AbstractMerkleRootMultisigIsm,
AbstractMetaProxyMultisigIsm
{
}
/**
* @title StaticMessageIdMultisigIsm
* @notice Manages per-domain m-of-n validator set that is used
* to verify interchain messages using a message ID signature quorum.
*/
contract StaticMessageIdMultisigIsm is
AbstractMessageIdMultisigIsm,
AbstractMetaProxyMultisigIsm
{
}
// solhint-enable no-empty-blocks
contract StaticMerkleRootMultisigIsmFactory is
StaticThresholdAddressSetFactory
{
function _deployImplementation() internal override returns (address) {
return address(new StaticMerkleRootMultisigIsm());
}
}
contract StaticMessageIdMultisigIsmFactory is StaticThresholdAddressSetFactory {
function _deployImplementation() internal override returns (address) {
return address(new StaticMessageIdMultisigIsm());
}
}
// File contracts/interfaces/IValidatorAnnounce.sol
pragma solidity >=0.6.11;
interface IValidatorAnnounce {
/// @notice Returns a list of validators that have made announcements
function getAnnouncedValidators() external view returns (address[] memory);
/**
* @notice Returns a list of all announced storage locations for `validators`
* @param _validators The list of validators to get storage locations for
* @return A list of announced storage locations
*/
function getAnnouncedStorageLocations(address[] calldata _validators)
external
view
returns (string[][] memory);
/**
* @notice Announces a validator signature storage location
* @param _storageLocation Information encoding the location of signed
* checkpoints
* @param _signature The signed validator announcement
* @return True upon success
*/
function announce(
address _validator,
string calldata _storageLocation,
bytes calldata _signature
) external returns (bool);
}
// File contracts/isms/multisig/ValidatorAnnounce.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title ValidatorAnnounce
* @notice Stores the location(s) of validator signed checkpoints
*/
contract ValidatorAnnounce is MailboxClient, IValidatorAnnounce {
// ============ Libraries ============
using EnumerableSet for EnumerableSet.AddressSet;
using TypeCasts for address;
// ============ Public Storage ============
// The set of validators that have announced
EnumerableSet.AddressSet private validators;
// Storage locations of validator signed checkpoints
mapping(address => string[]) private storageLocations;
// Mapping to prevent the same announcement from being registered
// multiple times.
mapping(bytes32 => bool) private replayProtection;
// ============ Events ============
/**
* @notice Emitted when a new validator announcement is made
* @param validator The address of the announcing validator
* @param storageLocation The storage location being announced
*/
event ValidatorAnnouncement(
address indexed validator,
string storageLocation
);
// ============ Constructor ============
constructor(address _mailbox) MailboxClient(_mailbox) {}
// ============ External Functions ============
/**
* @notice Announces a validator signature storage location
* @param _storageLocation Information encoding the location of signed
* checkpoints
* @param _signature The signed validator announcement
* @return True upon success
*/
function announce(
address _validator,
string calldata _storageLocation,
bytes calldata _signature
) external returns (bool) {
// Ensure that the same storage metadata isn't being announced
// multiple times for the same validator.
bytes32 _replayId = keccak256(
abi.encodePacked(_validator, _storageLocation)
);
require(replayProtection[_replayId] == false, "replay");
replayProtection[_replayId] = true;
// Verify that the signature matches the declared validator
bytes32 _announcementDigest = getAnnouncementDigest(_storageLocation);
address _signer = ECDSA.recover(_announcementDigest, _signature);
require(_signer == _validator, "!signature");
// Store the announcement
if (!validators.contains(_validator)) {
validators.add(_validator);
}
storageLocations[_validator].push(_storageLocation);
emit ValidatorAnnouncement(_validator, _storageLocation);
return true;
}
/**
* @notice Returns a list of all announced storage locations
* @param _validators The list of validators to get registrations for
* @return A list of registered storage metadata
*/
function getAnnouncedStorageLocations(address[] calldata _validators)
external
view
returns (string[][] memory)
{
string[][] memory _metadata = new string[][](_validators.length);
for (uint256 i = 0; i < _validators.length; i++) {
_metadata[i] = storageLocations[_validators[i]];
}
return _metadata;
}
/// @notice Returns a list of validators that have made announcements
function getAnnouncedValidators() external view returns (address[] memory) {
return validators.values();
}
/**
* @notice Returns the digest validators are expected to sign when signing announcements.
* @param _storageLocation Storage location string.
* @return The digest of the announcement.
*/
function getAnnouncementDigest(string memory _storageLocation)
public
view
returns (bytes32)
{
return
ECDSA.toEthSignedMessageHash(
keccak256(abi.encodePacked(_domainHash(), _storageLocation))
);
}
/**
* @notice Returns the domain separator used in validator announcements.
*/
function _domainHash() internal view returns (bytes32) {
return
keccak256(
abi.encodePacked(
localDomain,
address(mailbox).addressToBytes32(),
"HYPERLANE_ANNOUNCEMENT"
)
);
}
}
// File contracts/isms/NoopIsm.sol
pragma solidity >=0.8.0;
contract NoopIsm is IInterchainSecurityModule {
uint8 public constant override moduleType = uint8(Types.NULL);
function verify(bytes calldata, bytes calldata)
public
pure
override
returns (bool)
{
return true;
}
}
// File contracts/isms/PausableIsm.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
// ============ Internal Imports ============
contract PausableIsm is IInterchainSecurityModule, Ownable, Pausable {
uint8 public constant override moduleType = uint8(Types.NULL);
/**
* @inheritdoc IInterchainSecurityModule
* @dev Reverts when paused, otherwise returns `true`.
*/
function verify(bytes calldata, bytes calldata)
external
view
whenNotPaused
returns (bool)
{
return true;
}
function pause() external onlyOwner {
_pause();
}
function unpause() external onlyOwner {
_unpause();
}
}
// File contracts/isms/routing/AbstractRoutingIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title RoutingIsm
*/
abstract contract AbstractRoutingIsm is IRoutingIsm {
// ============ Constants ============
// solhint-disable-next-line const-name-snakecase
uint8 public constant moduleType =
uint8(IInterchainSecurityModule.Types.ROUTING);
// ============ Virtual Functions ============
// ======= OVERRIDE THESE TO IMPLEMENT =======
/**
* @notice Returns the ISM responsible for verifying _message
* @dev Can change based on the content of _message
* @param _message Formatted Hyperlane message (see Message.sol).
* @return module The ISM to use to verify _message
*/
function route(bytes calldata _message)
public
view
virtual
returns (IInterchainSecurityModule);
// ============ Public Functions ============
/**
* @notice Routes _metadata and _message to the correct ISM
* @param _metadata ABI encoded module metadata
* @param _message Formatted Hyperlane message (see Message.sol).
*/
function verify(bytes calldata _metadata, bytes calldata _message)
public
returns (bool)
{
return route(_message).verify(_metadata, _message);
}
}
// File contracts/isms/routing/DomainRoutingIsm.sol
pragma solidity >=0.8.0;
// ============ External Imports ============
// ============ Internal Imports ============
/**
* @title DomainRoutingIsm
*/
contract DomainRoutingIsm is AbstractRoutingIsm, OwnableUpgradeable {
using EnumerableMapExtended for EnumerableMapExtended.UintToBytes32Map;
using Message for bytes;
using TypeCasts for bytes32;
using TypeCasts for address;
using Address for address;
using Strings for uint32;
// ============ Mutable Storage ============
EnumerableMapExtended.UintToBytes32Map internal _modules;
// ============ External Functions ============
/**
* @param _owner The owner of the contract.
*/
function initialize(address _owner) public initializer {
__Ownable_init();
_transferOwnership(_owner);
}
/**
* @notice Sets the ISMs to be used for the specified origin domains
* @param _owner The owner of the contract.
* @param _domains The origin domains
* @param __modules The ISMs to use to verify messages
*/
function initialize(
address _owner,
uint32[] calldata _domains,
IInterchainSecurityModule[] calldata __modules
) public initializer {
__Ownable_init();
require(_domains.length == __modules.length, "length mismatch");
uint256 _length = _domains.length;
for (uint256 i = 0; i < _length; ++i) {
_set(_domains[i], address(__modules[i]));
}
_transferOwnership(_owner);
}
/**
* @notice Sets the ISM to be used for the specified origin domain
* @param _domain The origin domain
* @param _module The ISM to use to verify messages
*/
function set(uint32 _domain, IInterchainSecurityModule _module)
external
onlyOwner
{
_set(_domain, address(_module));
}
/**
* @notice Removes the specified origin domain
* @param _domain The origin domain
*/
function remove(uint32 _domain) external onlyOwner {
_remove(_domain);
}
function domains() external view returns (uint256[] memory) {
return _modules.keys();
}
function module(uint32 origin)
public
view
virtual
returns (IInterchainSecurityModule)
{
(bool contained, bytes32 _module) = _modules.tryGet(origin);
require(contained, _originNotFoundError(origin));
return IInterchainSecurityModule(_module.bytes32ToAddress());
}
// ============ Public Functions ============
/**
* @notice Returns the ISM responsible for verifying _message
* @dev Can change based on the content of _message
* @param _message Formatted Hyperlane message (see Message.sol).
* @return module The ISM to use to verify _message
*/
function route(bytes calldata _message)
public
view
override
returns (IInterchainSecurityModule)
{
return module(_message.origin());
}
// ============ Internal Functions ============
/**
* @notice Removes the specified origin domain's ISM
* @param _domain The origin domain
*/
function _remove(uint32 _domain) internal {
require(_modules.remove(_domain), _originNotFoundError(_domain));
}
function _originNotFoundError(uint32 _origin)
internal
pure
returns (string memory)
{
return string.concat("No ISM found for origin: ", _origin.toString());
}
/**
* @notice Sets the ISM to be used for the specified origin domain
* @param _domain The origin domain
* @param _module The ISM to use to verify messages
*/
function _set(uint32 _domain, address _module) internal {
require(_module.isContract(), "ISM must be a contract");
_modules.set(_domain, _module.addressToBytes32());
}
}
// File contracts/isms/routing/DefaultFallbackRoutingIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
// ============ External Imports ============
contract DefaultFallbackRoutingIsm is DomainRoutingIsm, MailboxClient {
using EnumerableMapExtended for EnumerableMapExtended.UintToBytes32Map;
using Address for address;
using TypeCasts for bytes32;
constructor(address _mailbox) MailboxClient(_mailbox) {}
function module(uint32 origin)
public
view
override
returns (IInterchainSecurityModule)
{
(bool contained, bytes32 _module) = _modules.tryGet(origin);
if (contained) {
return IInterchainSecurityModule(_module.bytes32ToAddress());
} else {
return mailbox.defaultIsm();
}
}
}
// File contracts/libs/MinimalProxy.sol
pragma solidity >=0.6.11;
// Library for building bytecode of minimal proxies (see https://eips.ethereum.org/EIPS/eip-1167)
library MinimalProxy {
bytes20 private constant PREFIX =
hex"3d602d80600a3d3981f3363d3d373d3d3d363d73";
bytes15 private constant SUFFIX = hex"5af43d82803e903d91602b57fd5bf3";
function create(address implementation) internal returns (address proxy) {
bytes memory _bytecode = bytecode(implementation);
assembly {
proxy := create(0, add(_bytecode, 32), mload(_bytecode))
}
}
function bytecode(address implementation)
internal
pure
returns (bytes memory)
{
return abi.encodePacked(PREFIX, bytes20(implementation), SUFFIX);
}
}
// File contracts/isms/routing/DomainRoutingIsmFactory.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
abstract contract AbstractDomainRoutingIsmFactory {
/**
* @notice Emitted when a routing module is deployed
* @param module The deployed ISM
*/
event ModuleDeployed(DomainRoutingIsm module);
// ============ External Functions ============
/**
* @notice Deploys and initializes a DomainRoutingIsm using a minimal proxy
* @param _domains The origin domains
* @param _modules The ISMs to use to verify messages
*/
function deploy(
uint32[] calldata _domains,
IInterchainSecurityModule[] calldata _modules
) external returns (DomainRoutingIsm) {
DomainRoutingIsm _ism = DomainRoutingIsm(
MinimalProxy.create(implementation())
);
emit ModuleDeployed(_ism);
_ism.initialize(msg.sender, _domains, _modules);
return _ism;
}
function implementation() public view virtual returns (address);
}
/**
* @title DomainRoutingIsmFactory
*/
contract DomainRoutingIsmFactory is AbstractDomainRoutingIsmFactory {
// ============ Immutables ============
address internal immutable _implementation;
constructor() {
_implementation = address(new DomainRoutingIsm());
}
function implementation() public view override returns (address) {
return _implementation;
}
}
/**
* @title DefaultFallbackRoutingIsmFactory
*/
contract DefaultFallbackRoutingIsmFactory is AbstractDomainRoutingIsmFactory {
// ============ Immutables ============
address internal immutable _implementation;
constructor(address mailbox) {
_implementation = address(new DefaultFallbackRoutingIsm(mailbox));
}
function implementation() public view override returns (address) {
return _implementation;
}
}
// File contracts/middleware/libs/Call.sol
pragma solidity ^0.8.13;
library CallLib {
struct StaticCall {
// supporting non EVM targets
bytes32 to;
bytes data;
}
struct Call {
// supporting non EVM targets
bytes32 to;
uint256 value;
bytes data;
}
struct StaticCallWithCallback {
StaticCall _call;
bytes callback;
}
function call(Call memory _call)
internal
returns (bytes memory returnData)
{
return
Address.functionCallWithValue(
TypeCasts.bytes32ToAddress(_call.to),
_call.data,
_call.value
);
}
function staticcall(StaticCall memory _call)
private
view
returns (bytes memory)
{
return
Address.functionStaticCall(
TypeCasts.bytes32ToAddress(_call.to),
_call.data
);
}
function staticcall(StaticCallWithCallback memory _call)
internal
view
returns (bytes memory callback)
{
return bytes.concat(_call.callback, staticcall(_call._call));
}
function multicall(Call[] memory calls) internal {
uint256 i = 0;
uint256 len = calls.length;
while (i < len) {
call(calls[i]);
unchecked {
++i;
}
}
}
function multistaticcall(StaticCallWithCallback[] memory _calls)
internal
view
returns (bytes[] memory)
{
uint256 i = 0;
uint256 len = _calls.length;
bytes[] memory callbacks = new bytes[](len);
while (i < len) {
callbacks[i] = staticcall(_calls[i]);
unchecked {
++i;
}
}
return callbacks;
}
function multicallto(address to, bytes[] memory calls) internal {
uint256 i = 0;
uint256 len = calls.length;
while (i < len) {
Address.functionCall(to, calls[i]);
unchecked {
++i;
}
}
}
function build(bytes32 to, bytes memory data)
internal
pure
returns (StaticCall memory)
{
return StaticCall(to, data);
}
function build(address to, bytes memory data)
internal
pure
returns (StaticCall memory)
{
return build(TypeCasts.addressToBytes32(to), data);
}
function build(
bytes32 to,
uint256 value,
bytes memory data
) internal pure returns (Call memory) {
return Call(to, value, data);
}
function build(
address to,
uint256 value,
bytes memory data
) internal pure returns (Call memory) {
return Call(TypeCasts.addressToBytes32(to), value, data);
}
function build(
bytes32 to,
bytes memory data,
bytes memory callback
) internal pure returns (StaticCallWithCallback memory) {
return StaticCallWithCallback(build(to, data), callback);
}
function build(
address to,
bytes memory data,
bytes memory callback
) internal pure returns (StaticCallWithCallback memory) {
return StaticCallWithCallback(build(to, data), callback);
}
}
// File contracts/middleware/libs/InterchainAccountMessage.sol
pragma solidity >=0.8.0;
/**
* Format of message:
* [ 0: 32] ICA owner
* [ 32: 64] ICA ISM
* [ 64:????] Calls, abi encoded
*/
library InterchainAccountMessage {
using TypeCasts for bytes32;
/**
* @notice Returns formatted (packed) InterchainAccountMessage
* @dev This function should only be used in memory message construction.
* @param _owner The owner of the interchain account
* @param _ism The address of the remote ISM
* @param _to The address of the contract to call
* @param _value The value to include in the call
* @param _data The calldata
* @return Formatted message body
*/
function encode(
address _owner,
bytes32 _ism,
address _to,
uint256 _value,
bytes memory _data
) internal pure returns (bytes memory) {
CallLib.Call[] memory _calls = new CallLib.Call[](1);
_calls[0] = CallLib.build(_to, _value, _data);
return abi.encode(TypeCasts.addressToBytes32(_owner), _ism, _calls);
}
/**
* @notice Returns formatted (packed) InterchainAccountMessage
* @dev This function should only be used in memory message construction.
* @param _owner The owner of the interchain account
* @param _ism The address of the remote ISM
* @param _calls The sequence of calls to make
* @return Formatted message body
*/
function encode(
bytes32 _owner,
bytes32 _ism,
CallLib.Call[] calldata _calls
) internal pure returns (bytes memory) {
return abi.encode(_owner, _ism, _calls);
}
/**
* @notice Returns formatted (packed) InterchainAccountMessage
* @dev This function should only be used in memory message construction.
* @param _owner The owner of the interchain account
* @param _ism The address of the remote ISM
* @param _calls The sequence of calls to make
* @return Formatted message body
*/
function encode(
address _owner,
bytes32 _ism,
CallLib.Call[] calldata _calls
) internal pure returns (bytes memory) {
return encode(TypeCasts.addressToBytes32(_owner), _ism, _calls);
}
/**
* @notice Parses and returns the calls from the provided message
* @param _message The interchain account message
* @return The array of calls
*/
function decode(bytes calldata _message)
internal
pure
returns (
bytes32,
bytes32,
CallLib.Call[] memory
)
{
return abi.decode(_message, (bytes32, bytes32, CallLib.Call[]));
}
/**
* @notice Parses and returns the ISM address from the provided message
* @param _message The interchain account message
* @return The ISM encoded in the message
*/
function ism(bytes calldata _message) internal pure returns (address) {
return address(bytes20(_message[44:64]));
}
}
// File contracts/isms/routing/InterchainAccountIsm.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
/**
* @title InterchainAccountIsm
*/
contract InterchainAccountIsm is AbstractRoutingIsm {
IMailbox private immutable mailbox;
// ============ Constructor ============
constructor(address _mailbox) {
mailbox = IMailbox(_mailbox);
}
// ============ Public Functions ============
/**
* @notice Returns the ISM responsible for verifying _message
* @param _message Formatted Hyperlane message (see Message.sol).
* @return module The ISM to use to verify _message
*/
function route(bytes calldata _message)
public
view
virtual
override
returns (IInterchainSecurityModule)
{
address _ism = InterchainAccountMessage.ism(Message.body(_message));
if (_ism == address(0)) {
return mailbox.defaultIsm();
} else {
return IInterchainSecurityModule(_ism);
}
}
}
// File contracts/upgrade/Versioned.sol
pragma solidity >=0.6.11;
/**
* @title Versioned
* @notice Version getter for contracts
**/
contract Versioned {
uint8 public constant VERSION = 3;
}
// File contracts/Mailbox.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
// ============ External Imports ============
contract Mailbox is IMailbox, Indexed, Versioned, OwnableUpgradeable {
// ============ Libraries ============
using Message for bytes;
using TypeCasts for bytes32;
using TypeCasts for address;
// ============ Constants ============
// Domain of chain on which the contract is deployed
uint32 public immutable localDomain;
// ============ Public Storage ============
// A monotonically increasing nonce for outbound unique message IDs.
uint32 public nonce;
// The latest dispatched message ID used for auth in post-dispatch hooks.
bytes32 public latestDispatchedId;
// The default ISM, used if the recipient fails to specify one.
IInterchainSecurityModule public defaultIsm;
// The default post dispatch hook, used for post processing of opting-in dispatches.
IPostDispatchHook public defaultHook;
// The required post dispatch hook, used for post processing of ALL dispatches.
IPostDispatchHook public requiredHook;
// Mapping of message ID to delivery context that processed the message.
struct Delivery {
address processor;
uint48 blockNumber;
}
mapping(bytes32 => Delivery) internal deliveries;
// ============ Events ============
/**
* @notice Emitted when the default ISM is updated
* @param module The new default ISM
*/
event DefaultIsmSet(address indexed module);
/**
* @notice Emitted when the default hook is updated
* @param hook The new default hook
*/
event DefaultHookSet(address indexed hook);
/**
* @notice Emitted when the required hook is updated
* @param hook The new required hook
*/
event RequiredHookSet(address indexed hook);
// ============ Constructor ============
constructor(uint32 _localDomain) {
localDomain = _localDomain;
}
// ============ Initializers ============
function initialize(
address _owner,
address _defaultIsm,
address _defaultHook,
address _requiredHook
) external initializer {
__Ownable_init();
setDefaultIsm(_defaultIsm);
setDefaultHook(_defaultHook);
setRequiredHook(_requiredHook);
transferOwnership(_owner);
}
// ============ External Functions ============
/**
* @notice Dispatches a message to the destination domain & recipient
* using the default hook and empty metadata.
* @param _destinationDomain Domain of destination chain
* @param _recipientAddress Address of recipient on destination chain as bytes32
* @param _messageBody Raw bytes content of message body
* @return The message ID inserted into the Mailbox's merkle tree
*/
function dispatch(
uint32 _destinationDomain,
bytes32 _recipientAddress,
bytes calldata _messageBody
) external payable override returns (bytes32) {
return
dispatch(
_destinationDomain,
_recipientAddress,
_messageBody,
_messageBody[0:0],
defaultHook
);
}
/**
* @notice Dispatches a message to the destination domain & recipient.
* @param destinationDomain Domain of destination chain
* @param recipientAddress Address of recipient on destination chain as bytes32
* @param messageBody Raw bytes content of message body
* @param hookMetadata Metadata used by the post dispatch hook
* @return The message ID inserted into the Mailbox's merkle tree
*/
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata hookMetadata
) external payable override returns (bytes32) {
return
dispatch(
destinationDomain,
recipientAddress,
messageBody,
hookMetadata,
defaultHook
);
}
/**
* @notice Computes quote for dipatching a message to the destination domain & recipient
* using the default hook and empty metadata.
* @param destinationDomain Domain of destination chain
* @param recipientAddress Address of recipient on destination chain as bytes32
* @param messageBody Raw bytes content of message body
* @return fee The payment required to dispatch the message
*/
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) external view returns (uint256 fee) {
return
quoteDispatch(
destinationDomain,
recipientAddress,
messageBody,
messageBody[0:0],
defaultHook
);
}
/**
* @notice Computes quote for dispatching a message to the destination domain & recipient.
* @param destinationDomain Domain of destination chain
* @param recipientAddress Address of recipient on destination chain as bytes32
* @param messageBody Raw bytes content of message body
* @param defaultHookMetadata Metadata used by the default post dispatch hook
* @return fee The payment required to dispatch the message
*/
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata defaultHookMetadata
) external view returns (uint256 fee) {
return
quoteDispatch(
destinationDomain,
recipientAddress,
messageBody,
defaultHookMetadata,
defaultHook
);
}
/**
* @notice Attempts to deliver `_message` to its recipient. Verifies
* `_message` via the recipient's ISM using the provided `_metadata`.
* @param _metadata Metadata used by the ISM to verify `_message`.
* @param _message Formatted Hyperlane message (refer to Message.sol).
*/
function process(bytes calldata _metadata, bytes calldata _message)
external
payable
override
{
/// CHECKS ///
// Check that the message was intended for this mailbox.
require(_message.version() == VERSION, "Mailbox: bad version");
require(
_message.destination() == localDomain,
"Mailbox: unexpected destination"
);
// Check that the message hasn't already been delivered.
bytes32 _id = _message.id();
require(delivered(_id) == false, "Mailbox: already delivered");
// Get the recipient's ISM.
address recipient = _message.recipientAddress();
IInterchainSecurityModule ism = recipientIsm(recipient);
/// EFFECTS ///
deliveries[_id] = Delivery({
processor: msg.sender,
blockNumber: uint48(block.number)
});
emit Process(_message.origin(), _message.sender(), recipient);
emit ProcessId(_id);
/// INTERACTIONS ///
// Verify the message via the interchain security module.
require(
ism.verify(_metadata, _message),
"Mailbox: ISM verification failed"
);
// Deliver the message to the recipient.
IMessageRecipient(recipient).handle{value: msg.value}(
_message.origin(),
_message.sender(),
_message.body()
);
}
/**
* @notice Returns the account that processed the message.
* @param _id The message ID to check.
* @return The account that processed the message.
*/
function processor(bytes32 _id) external view returns (address) {
return deliveries[_id].processor;
}
/**
* @notice Returns the account that processed the message.
* @param _id The message ID to check.
* @return The number of the block that the message was processed at.
*/
function processedAt(bytes32 _id) external view returns (uint48) {
return deliveries[_id].blockNumber;
}
// ============ Public Functions ============
/**
* @notice Dispatches a message to the destination domain & recipient.
* @param destinationDomain Domain of destination chain
* @param recipientAddress Address of recipient on destination chain as bytes32
* @param messageBody Raw bytes content of message body
* @param metadata Metadata used by the post dispatch hook
* @param hook Custom hook to use instead of the default
* @return The message ID inserted into the Mailbox's merkle tree
*/
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata metadata,
IPostDispatchHook hook
) public payable virtual returns (bytes32) {
if (address(hook) == address(0)) {
hook = defaultHook;
}
/// CHECKS ///
// Format the message into packed bytes.
bytes memory message = _buildMessage(
destinationDomain,
recipientAddress,
messageBody
);
bytes32 id = message.id();
/// EFFECTS ///
latestDispatchedId = id;
nonce += 1;
emit Dispatch(msg.sender, destinationDomain, recipientAddress, message);
emit DispatchId(id);
/// INTERACTIONS ///
uint256 requiredValue = requiredHook.quoteDispatch(metadata, message);
// if underpaying, defer to required hook's reverting behavior
if (msg.value < requiredValue) {
requiredValue = msg.value;
}
requiredHook.postDispatch{value: requiredValue}(metadata, message);
hook.postDispatch{value: msg.value - requiredValue}(metadata, message);
return id;
}
/**
* @notice Computes quote for dispatching a message to the destination domain & recipient.
* @param destinationDomain Domain of destination chain
* @param recipientAddress Address of recipient on destination chain as bytes32
* @param messageBody Raw bytes content of message body
* @param metadata Metadata used by the post dispatch hook
* @param hook Custom hook to use instead of the default
* @return fee The payment required to dispatch the message
*/
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata metadata,
IPostDispatchHook hook
) public view returns (uint256 fee) {
if (address(hook) == address(0)) {
hook = defaultHook;
}
bytes memory message = _buildMessage(
destinationDomain,
recipientAddress,
messageBody
);
return
requiredHook.quoteDispatch(metadata, message) +
hook.quoteDispatch(metadata, message);
}
/**
* @notice Returns true if the message has been processed.
* @param _id The message ID to check.
* @return True if the message has been delivered.
*/
function delivered(bytes32 _id) public view override returns (bool) {
return deliveries[_id].blockNumber > 0;
}
/**
* @notice Sets the default ISM for the Mailbox.
* @param _module The new default ISM. Must be a contract.
*/
function setDefaultIsm(address _module) public onlyOwner {
require(
Address.isContract(_module),
"Mailbox: default ISM not contract"
);
defaultIsm = IInterchainSecurityModule(_module);
emit DefaultIsmSet(_module);
}
/**
* @notice Sets the default post dispatch hook for the Mailbox.
* @param _hook The new default post dispatch hook. Must be a contract.
*/
function setDefaultHook(address _hook) public onlyOwner {
require(
Address.isContract(_hook),
"Mailbox: default hook not contract"
);
defaultHook = IPostDispatchHook(_hook);
emit DefaultHookSet(_hook);
}
/**
* @notice Sets the required post dispatch hook for the Mailbox.
* @param _hook The new default post dispatch hook. Must be a contract.
*/
function setRequiredHook(address _hook) public onlyOwner {
require(
Address.isContract(_hook),
"Mailbox: required hook not contract"
);
requiredHook = IPostDispatchHook(_hook);
emit RequiredHookSet(_hook);
}
/**
* @notice Returns the ISM to use for the recipient, defaulting to the
* default ISM if none is specified.
* @param _recipient The message recipient whose ISM should be returned.
* @return The ISM to use for `_recipient`.
*/
function recipientIsm(address _recipient)
public
view
returns (IInterchainSecurityModule)
{
// use low-level staticcall in case of revert or empty return data
(bool success, bytes memory returnData) = _recipient.staticcall(
abi.encodeCall(
ISpecifiesInterchainSecurityModule.interchainSecurityModule,
()
)
);
// check if call was successful and returned data
if (success && returnData.length != 0) {
// check if returnData is a valid address
address ism = abi.decode(returnData, (address));
// check if the ISM is a contract
if (ism != address(0)) {
return IInterchainSecurityModule(ism);
}
}
// Use the default if a valid one is not specified by the recipient.
return defaultIsm;
}
// ============ Internal Functions ============
function _buildMessage(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) internal view returns (bytes memory) {
return
Message.formatMessage(
VERSION,
nonce,
localDomain,
msg.sender.addressToBytes32(),
destinationDomain,
recipientAddress,
messageBody
);
}
}
// File contracts/middleware/libs/OwnableMulticall.sol
pragma solidity ^0.8.13;
// ============ Internal Imports ============
/*
* @title OwnableMulticall
* @dev Permits immutable owner address to execute calls with value to other contracts.
*/
contract OwnableMulticall {
address public immutable owner;
constructor(address _owner) {
owner = _owner;
}
modifier onlyOwner() {
require(msg.sender == owner, "!owner");
_;
}
function multicall(CallLib.Call[] calldata calls) external onlyOwner {
return CallLib.multicall(calls);
}
// solhint-disable-next-line no-empty-blocks
receive() external payable {}
}
// File contracts/middleware/InterchainAccountRouter.sol
pragma solidity ^0.8.13;
// ============ Internal Imports ============
// ============ External Imports ============
/*
* @title A contract that allows accounts on chain A to call contracts via a
* proxy contract on chain B.
*/
contract InterchainAccountRouter is Router {
// ============ Libraries ============
using TypeCasts for address;
using TypeCasts for bytes32;
// ============ Constants ============
address internal implementation;
bytes32 internal bytecodeHash;
// ============ Public Storage ============
mapping(uint32 => bytes32) public isms;
// ============ Upgrade Gap ============
uint256[47] private __GAP;
// ============ Events ============
/**
* @notice Emitted when a default ISM is set for a remote domain
* @param domain The remote domain
* @param ism The address of the remote ISM
*/
event RemoteIsmEnrolled(uint32 indexed domain, bytes32 ism);
/**
* @notice Emitted when an interchain call is dispatched to a remote domain
* @param destination The destination domain on which to make the call
* @param owner The local owner of the remote ICA
* @param router The address of the remote router
* @param ism The address of the remote ISM
*/
event RemoteCallDispatched(
uint32 indexed destination,
address indexed owner,
bytes32 router,
bytes32 ism
);
/**
* @notice Emitted when an interchain account contract is deployed
* @param origin The domain of the chain where the message was sent from
* @param owner The address of the account that sent the message
* @param ism The address of the local ISM
* @param account The address of the proxy account that was created
*/
event InterchainAccountCreated(
uint32 indexed origin,
bytes32 indexed owner,
address ism,
address account
);
// ============ Constructor ============
constructor(address _mailbox) Router(_mailbox) {}
// ============ Initializers ============
/**
* @notice Initializes the contract with HyperlaneConnectionClient contracts
* @param _interchainGasPaymaster Unused but required by HyperlaneConnectionClient
* @param _interchainSecurityModule The address of the local ISM contract
* @param _owner The address with owner privileges
*/
function initialize(
address _interchainGasPaymaster,
address _interchainSecurityModule,
address _owner
) external initializer {
_MailboxClient_initialize(
_interchainGasPaymaster,
_interchainSecurityModule,
_owner
);
implementation = address(new OwnableMulticall(address(this)));
// cannot be stored immutably because it is dynamically sized
bytes memory _bytecode = MinimalProxy.bytecode(implementation);
bytecodeHash = keccak256(_bytecode);
}
/**
* @notice Registers the address of remote InterchainAccountRouter
* and ISM contracts to use as a default when making interchain calls
* @param _destination The remote domain
* @param _router The address of the remote InterchainAccountRouter
* @param _ism The address of the remote ISM
*/
function enrollRemoteRouterAndIsm(
uint32 _destination,
bytes32 _router,
bytes32 _ism
) external onlyOwner {
_enrollRemoteRouterAndIsm(_destination, _router, _ism);
}
/**
* @notice Registers the address of remote InterchainAccountRouters
* and ISM contracts to use as defaults when making interchain calls
* @param _destinations The remote domains
* @param _routers The address of the remote InterchainAccountRouters
* @param _isms The address of the remote ISMs
*/
function enrollRemoteRouterAndIsms(
uint32[] calldata _destinations,
bytes32[] calldata _routers,
bytes32[] calldata _isms
) external onlyOwner {
require(
_destinations.length == _routers.length &&
_destinations.length == _isms.length,
"length mismatch"
);
for (uint256 i = 0; i < _destinations.length; i++) {
_enrollRemoteRouterAndIsm(_destinations[i], _routers[i], _isms[i]);
}
}
// ============ External Functions ============
/**
* @notice Dispatches a single remote call to be made by an owner's
* interchain account on the destination domain
* @dev Uses the default router and ISM addresses for the destination
* domain, reverting if none have been configured
* @param _destination The remote domain of the chain to make calls on
* @param _to The address of the contract to call
* @param _value The value to include in the call
* @param _data The calldata
* @return The Hyperlane message ID
*/
function callRemote(
uint32 _destination,
address _to,
uint256 _value,
bytes memory _data
) external returns (bytes32) {
bytes32 _router = routers(_destination);
bytes32 _ism = isms[_destination];
bytes memory _body = InterchainAccountMessage.encode(
msg.sender,
_ism,
_to,
_value,
_data
);
return _dispatchMessage(_destination, _router, _ism, _body);
}
/**
* @notice Dispatches a sequence of remote calls to be made by an owner's
* interchain account on the destination domain
* @dev Uses the default router and ISM addresses for the destination
* domain, reverting if none have been configured
* @dev Recommend using CallLib.build to format the interchain calls.
* @param _destination The remote domain of the chain to make calls on
* @param _calls The sequence of calls to make
* @return The Hyperlane message ID
*/
function callRemote(uint32 _destination, CallLib.Call[] calldata _calls)
external
returns (bytes32)
{
bytes32 _router = routers(_destination);
bytes32 _ism = isms[_destination];
return callRemoteWithOverrides(_destination, _router, _ism, _calls);
}
/**
* @notice Handles dispatched messages by relaying calls to the interchain account
* @param _origin The origin domain of the interchain account
* @param _sender The sender of the interchain message
* @param _message The InterchainAccountMessage containing the account
* owner, ISM, and sequence of calls to be relayed
* @dev Does not need to be onlyRemoteRouter, as this application is designed
* to receive messages from untrusted remote contracts.
*/
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) external payable override onlyMailbox {
(
bytes32 _owner,
bytes32 _ism,
CallLib.Call[] memory _calls
) = InterchainAccountMessage.decode(_message);
OwnableMulticall _interchainAccount = getDeployedInterchainAccount(
_origin,
_owner,
_sender,
_ism.bytes32ToAddress()
);
_interchainAccount.multicall(_calls);
}
/**
* @notice Returns the local address of an interchain account
* @dev This interchain account is not guaranteed to have been deployed
* @param _origin The remote origin domain of the interchain account
* @param _router The remote origin InterchainAccountRouter
* @param _owner The remote owner of the interchain account
* @param _ism The local address of the ISM
* @return The local address of the interchain account
*/
function getLocalInterchainAccount(
uint32 _origin,
address _owner,
address _router,
address _ism
) external view returns (OwnableMulticall) {
return
getLocalInterchainAccount(
_origin,
_owner.addressToBytes32(),
_router.addressToBytes32(),
_ism
);
}
/**
* @notice Returns the remote address of a locally owned interchain account
* @dev This interchain account is not guaranteed to have been deployed
* @dev This function will only work if the destination domain is
* EVM compatible
* @param _destination The remote destination domain of the interchain account
* @param _owner The local owner of the interchain account
* @return The remote address of the interchain account
*/
function getRemoteInterchainAccount(uint32 _destination, address _owner)
external
view
returns (address)
{
address _router = routers(_destination).bytes32ToAddress();
address _ism = isms[_destination].bytes32ToAddress();
return getRemoteInterchainAccount(_owner, _router, _ism);
}
// ============ Public Functions ============
/**
* @notice Returns and deploys (if not already) an interchain account
* @param _origin The remote origin domain of the interchain account
* @param _owner The remote owner of the interchain account
* @param _router The remote origin InterchainAccountRouter
* @param _ism The local address of the ISM
* @return The address of the interchain account
*/
function getDeployedInterchainAccount(
uint32 _origin,
address _owner,
address _router,
address _ism
) public returns (OwnableMulticall) {
return
getDeployedInterchainAccount(
_origin,
_owner.addressToBytes32(),
_router.addressToBytes32(),
_ism
);
}
/**
* @notice Returns and deploys (if not already) an interchain account
* @param _origin The remote origin domain of the interchain account
* @param _owner The remote owner of the interchain account
* @param _router The remote origin InterchainAccountRouter
* @param _ism The local address of the ISM
* @return The address of the interchain account
*/
function getDeployedInterchainAccount(
uint32 _origin,
bytes32 _owner,
bytes32 _router,
address _ism
) public returns (OwnableMulticall) {
bytes32 _salt = _getSalt(
_origin,
_owner,
_router,
_ism.addressToBytes32()
);
address payable _account = _getLocalInterchainAccount(_salt);
if (!Address.isContract(_account)) {
bytes memory _bytecode = MinimalProxy.bytecode(implementation);
_account = payable(Create2.deploy(0, _salt, _bytecode));
emit InterchainAccountCreated(_origin, _owner, _ism, _account);
}
return OwnableMulticall(_account);
}
/**
* @notice Returns the local address of a remotely owned interchain account
* @dev This interchain account is not guaranteed to have been deployed
* @param _origin The remote origin domain of the interchain account
* @param _owner The remote owner of the interchain account
* @param _router The remote InterchainAccountRouter
* @param _ism The local address of the ISM
* @return The local address of the interchain account
*/
function getLocalInterchainAccount(
uint32 _origin,
bytes32 _owner,
bytes32 _router,
address _ism
) public view returns (OwnableMulticall) {
return
OwnableMulticall(
_getLocalInterchainAccount(
_getSalt(_origin, _owner, _router, _ism.addressToBytes32())
)
);
}
/**
* @notice Returns the remote address of a locally owned interchain account
* @dev This interchain account is not guaranteed to have been deployed
* @dev This function will only work if the destination domain is
* EVM compatible
* @param _owner The local owner of the interchain account
* @param _router The remote InterchainAccountRouter
* @param _ism The remote address of the ISM
* @return The remote address of the interchain account
*/
function getRemoteInterchainAccount(
address _owner,
address _router,
address _ism
) public view returns (address) {
require(_router != address(0), "no router specified for destination");
// Derives the address of the first contract deployed by _router using
// the CREATE opcode.
address _implementation = address(
uint160(
uint256(
keccak256(
abi.encodePacked(
bytes1(0xd6),
bytes1(0x94),
_router,
bytes1(0x01)
)
)
)
)
);
bytes memory _proxyBytecode = MinimalProxy.bytecode(_implementation);
bytes32 _bytecodeHash = keccak256(_proxyBytecode);
bytes32 _salt = _getSalt(
localDomain,
_owner.addressToBytes32(),
address(this).addressToBytes32(),
_ism.addressToBytes32()
);
return Create2.computeAddress(_salt, _bytecodeHash, _router);
}
/**
* @notice Dispatches a sequence of remote calls to be made by an owner's
* interchain account on the destination domain
* @dev Recommend using CallLib.build to format the interchain calls
* @param _destination The remote domain of the chain to make calls on
* @param _router The remote router address
* @param _ism The remote ISM address
* @param _calls The sequence of calls to make
* @return The Hyperlane message ID
*/
function callRemoteWithOverrides(
uint32 _destination,
bytes32 _router,
bytes32 _ism,
CallLib.Call[] calldata _calls
) public returns (bytes32) {
bytes memory _body = InterchainAccountMessage.encode(
msg.sender,
_ism,
_calls
);
return _dispatchMessage(_destination, _router, _ism, _body);
}
// ============ Internal Functions ============
/**
* @dev Required for use of Router, compiler will not include this function in the bytecode
*/
function _handle(
uint32,
bytes32,
bytes calldata
) internal pure override {
assert(false);
}
/**
* @notice Overrides Router._enrollRemoteRouter to also enroll a default ISM
* @param _destination The remote domain
* @param _address The address of the remote InterchainAccountRouter
* @dev Sets the default ISM to the zero address
*/
function _enrollRemoteRouter(uint32 _destination, bytes32 _address)
internal
override
{
_enrollRemoteRouterAndIsm(_destination, _address, bytes32(0));
}
// ============ Private Functions ============
/**
* @notice Registers the address of a remote ISM contract to use as default
* @param _destination The remote domain
* @param _ism The address of the remote ISM
*/
function _enrollRemoteIsm(uint32 _destination, bytes32 _ism) private {
isms[_destination] = _ism;
emit RemoteIsmEnrolled(_destination, _ism);
}
/**
* @notice Registers the address of remote InterchainAccountRouter
* and ISM contracts to use as a default when making interchain calls
* @param _destination The remote domain
* @param _router The address of the remote InterchainAccountRouter
* @param _ism The address of the remote ISM
*/
function _enrollRemoteRouterAndIsm(
uint32 _destination,
bytes32 _router,
bytes32 _ism
) private {
require(
routers(_destination) == bytes32(0) &&
isms[_destination] == bytes32(0),
"router and ISM defaults are immutable once set"
);
Router._enrollRemoteRouter(_destination, _router);
_enrollRemoteIsm(_destination, _ism);
}
/**
* @notice Dispatches an InterchainAccountMessage to the remote router
* @param _destination The remote domain
* @param _router The address of the remote InterchainAccountRouter
* @param _ism The address of the remote ISM
* @param _body The InterchainAccountMessage body
*/
function _dispatchMessage(
uint32 _destination,
bytes32 _router,
bytes32 _ism,
bytes memory _body
) private returns (bytes32) {
require(_router != bytes32(0), "no router specified for destination");
emit RemoteCallDispatched(_destination, msg.sender, _router, _ism);
return mailbox.dispatch(_destination, _router, _body);
}
/**
* @notice Returns the salt used to deploy an interchain account
* @param _origin The remote origin domain of the interchain account
* @param _owner The remote owner of the interchain account
* @param _router The remote origin InterchainAccountRouter
* @param _ism The local address of the ISM
* @return The CREATE2 salt used for deploying the interchain account
*/
function _getSalt(
uint32 _origin,
bytes32 _owner,
bytes32 _router,
bytes32 _ism
) private pure returns (bytes32) {
return keccak256(abi.encodePacked(_origin, _owner, _router, _ism));
}
/**
* @notice Returns the address of the interchain account on the local chain
* @param _salt The CREATE2 salt used for deploying the interchain account
* @return The address of the interchain account
*/
function _getLocalInterchainAccount(bytes32 _salt)
private
view
returns (address payable)
{
return payable(Create2.computeAddress(_salt, bytecodeHash));
}
}
// File contracts/middleware/libs/InterchainQueryMessage.sol
pragma solidity ^0.8.13;
/**
* Format of message:
* [ 0: 32] Sender address
* [ 32: 64] Message type (left padded with zeroes)
* [ 64:???] Encoded call array
*/
library InterchainQueryMessage {
uint256 private constant SENDER_OFFSET = 0;
uint256 private constant TYPE_OFFSET = 32;
uint256 private constant CALLS_OFFSET = 64;
enum MessageType {
QUERY,
RESPONSE
}
/**
* @notice Parses and returns the query sender from the provided message
* @param _message The interchain query message
* @return The query sender as bytes32
*/
function sender(bytes calldata _message) internal pure returns (bytes32) {
return bytes32(_message[SENDER_OFFSET:TYPE_OFFSET]);
}
/**
* @notice Parses and returns the message type from the provided message
* @param _message The interchain query message
* @return The message type (query or response)
*/
function messageType(bytes calldata _message)
internal
pure
returns (MessageType)
{
// left padded with zeroes
return MessageType(uint8(bytes1(_message[CALLS_OFFSET - 1])));
}
/**
* @notice Returns formatted InterchainQueryMessage, type == QUERY
* @param _sender The query sender as bytes32
* @param _calls The sequence of queries to make, with the corresponding
* response callbacks
* @return Formatted message body
*/
function encode(
bytes32 _sender,
CallLib.StaticCallWithCallback[] calldata _calls
) internal pure returns (bytes memory) {
return abi.encode(_sender, MessageType.QUERY, _calls);
}
/**
* @notice Returns formatted InterchainQueryMessage, type == QUERY
* @param _sender The query sender as bytes32
* @param _to The address of the contract to query
* @param _data The calldata encoding the query
* @param _callback The calldata of the callback that will be made on the sender.
* The return value of the query will be appended.
* @return Formatted message body
*/
function encode(
bytes32 _sender,
address _to,
bytes memory _data,
bytes memory _callback
) internal pure returns (bytes memory) {
CallLib.StaticCallWithCallback[]
memory _calls = new CallLib.StaticCallWithCallback[](1);
_calls[0] = CallLib.build(_to, _data, _callback);
return abi.encode(_sender, MessageType.QUERY, _calls);
}
/**
* @notice Parses and returns the calls and callbacks from the message
* @param _message The interchain query message, type == QUERY
* @return _calls The sequence of queries to make with the corresponding
* response callbacks
*/
function callsWithCallbacks(bytes calldata _message)
internal
pure
returns (CallLib.StaticCallWithCallback[] memory _calls)
{
assert(messageType(_message) == MessageType.QUERY);
(, , _calls) = abi.decode(
_message,
(bytes32, MessageType, CallLib.StaticCallWithCallback[])
);
}
/**
* @notice Returns formatted InterchainQueryMessage, type == RESPONSE
* @param _sender The query sender as bytes32
* @param _calls The sequence of callbacks to make
* @return Formatted message body
*/
function encode(bytes32 _sender, bytes[] memory _calls)
internal
pure
returns (bytes memory)
{
return abi.encode(_sender, MessageType.RESPONSE, _calls);
}
/**
* @notice Parses and returns the callbacks from the message
* @param _message The interchain query message, type == RESPONSE
* @return _calls The sequence of callbacks to make
*/
function rawCalls(bytes calldata _message)
internal
pure
returns (bytes[] memory _calls)
{
assert(messageType(_message) == MessageType.RESPONSE);
(, , _calls) = abi.decode(_message, (bytes32, MessageType, bytes[]));
}
}
// File contracts/middleware/InterchainQueryRouter.sol
pragma solidity ^0.8.13;
// ============ Internal Imports ============
// ============ External Imports ============
/**
* @title Interchain Query Router that performs remote view calls on other chains and returns the result.
* @dev Currently does not support Sovereign Consensus (user specified Interchain Security Modules).
*/
contract InterchainQueryRouter is Router {
using TypeCasts for address;
using TypeCasts for bytes32;
using InterchainQueryMessage for bytes;
/**
* @notice Emitted when a query is dispatched to another chain.
* @param destination The domain of the chain to query.
* @param sender The address that dispatched the query.
*/
event QueryDispatched(uint32 indexed destination, address indexed sender);
/**
* @notice Emitted when a query is executed on the and callback dispatched to the origin chain.
* @param originDomain The domain of the chain that dispatched the query and receives the callback.
* @param sender The address to receive the result.
*/
event QueryExecuted(uint32 indexed originDomain, bytes32 indexed sender);
/**
* @notice Emitted when a query is resolved on the origin chain.
* @param destination The domain of the chain that was queried.
* @param sender The address that resolved the query.
*/
event QueryResolved(uint32 indexed destination, address indexed sender);
constructor(address _mailbox) Router(_mailbox) {}
/**
* @notice Initializes the Router contract with Hyperlane core contracts and the address of the interchain security module.
* @param _interchainGasPaymaster The address of the interchain gas paymaster contract.
* @param _interchainSecurityModule The address of the interchain security module contract.
* @param _owner The address with owner privileges.
*/
function initialize(
address _interchainGasPaymaster,
address _interchainSecurityModule,
address _owner
) external initializer {
_MailboxClient_initialize(
_interchainGasPaymaster,
_interchainSecurityModule,
_owner
);
}
/**
* @notice Dispatches a sequence of static calls (query) to the destination domain and set of callbacks to resolve the results on the dispatcher.
* @param _destination The domain of the chain to query.
* @param _to The address of the contract to query
* @param _data The calldata encoding the query
* @param _callback The calldata of the callback that will be made on the sender.
* The return value of the query will be appended.
* @dev Callbacks must be returned to the `msg.sender` for security reasons. Require this contract is the `msg.sender` on callbacks.
*/
function query(
uint32 _destination,
address _to,
bytes memory _data,
bytes memory _callback
) public returns (bytes32 messageId) {
emit QueryDispatched(_destination, msg.sender);
messageId = _dispatch(
_destination,
InterchainQueryMessage.encode(
msg.sender.addressToBytes32(),
_to,
_data,
_callback
)
);
}
/**
* @notice Dispatches a sequence of static calls (query) to the destination domain and set of callbacks to resolve the results on the dispatcher.
* @param _destination The domain of the chain to query.
* @param calls The sequence of static calls to dispatch and callbacks on the sender to resolve the results.
* @dev Recommend using CallLib.build to format the interchain calls.
* @dev Callbacks must be returned to the `msg.sender` for security reasons. Require this contract is the `msg.sender` on callbacks.
*/
function query(
uint32 _destination,
CallLib.StaticCallWithCallback[] calldata calls
) public returns (bytes32 messageId) {
emit QueryDispatched(_destination, msg.sender);
messageId = _dispatch(
_destination,
InterchainQueryMessage.encode(msg.sender.addressToBytes32(), calls)
);
}
/**
* @notice Handles a message from remote enrolled Interchain Query Router.
* @param _origin The domain of the chain that sent the message.
* @param _message The ABI-encoded interchain query.
*/
function _handle(
uint32 _origin,
bytes32, // router sender
bytes calldata _message
) internal override {
InterchainQueryMessage.MessageType messageType = _message.messageType();
bytes32 sender = _message.sender();
if (messageType == InterchainQueryMessage.MessageType.QUERY) {
CallLib.StaticCallWithCallback[]
memory callsWithCallback = InterchainQueryMessage
.callsWithCallbacks(_message);
bytes[] memory callbacks = CallLib.multistaticcall(
callsWithCallback
);
emit QueryExecuted(_origin, sender);
_dispatch(
_origin,
InterchainQueryMessage.encode(sender, callbacks)
);
} else if (messageType == InterchainQueryMessage.MessageType.RESPONSE) {
address senderAddress = sender.bytes32ToAddress();
bytes[] memory rawCalls = _message.rawCalls();
CallLib.multicallto(senderAddress, rawCalls);
emit QueryResolved(_origin, senderAddress);
} else {
assert(false);
}
}
}
// File contracts/middleware/liquidity-layer/interfaces/circle/ICircleMessageTransmitter.sol
pragma solidity ^0.8.13;
interface ICircleMessageTransmitter {
/**
* @notice Receive a message. Messages with a given nonce
* can only be broadcast once for a (sourceDomain, destinationDomain)
* pair. The message body of a valid message is passed to the
* specified recipient for further processing.
*
* @dev Attestation format:
* A valid attestation is the concatenated 65-byte signature(s) of exactly
* `thresholdSignature` signatures, in increasing order of attester address.
* ***If the attester addresses recovered from signatures are not in
* increasing order, signature verification will fail.***
* If incorrect number of signatures or duplicate signatures are supplied,
* signature verification will fail.
*
* Message format:
* Field Bytes Type Index
* version 4 uint32 0
* sourceDomain 4 uint32 4
* destinationDomain 4 uint32 8
* nonce 8 uint64 12
* sender 32 bytes32 20
* recipient 32 bytes32 52
* messageBody dynamic bytes 84
* @param _message Message bytes
* @param _attestation Concatenated 65-byte signature(s) of `_message`, in increasing order
* of the attester address recovered from signatures.
* @return success bool, true if successful
*/
function receiveMessage(bytes memory _message, bytes calldata _attestation)
external
returns (bool success);
function usedNonces(bytes32 _nonceId) external view returns (bool);
}
// File contracts/middleware/liquidity-layer/interfaces/circle/ITokenMessenger.sol
pragma solidity ^0.8.13;
interface ITokenMessenger {
event MessageSent(bytes message);
/**
* @notice Deposits and burns tokens from sender to be minted on destination domain.
* Emits a `DepositForBurn` event.
* @dev reverts if:
* - given burnToken is not supported
* - given destinationDomain has no TokenMessenger registered
* - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
* to this contract is less than `amount`.
* - burn() reverts. For example, if `amount` is 0.
* - MessageTransmitter returns false or reverts.
* @param _amount amount of tokens to burn
* @param _destinationDomain destination domain (ETH = 0, AVAX = 1)
* @param _mintRecipient address of mint recipient on destination domain
* @param _burnToken address of contract to burn deposited tokens, on local domain
* @return _nonce unique nonce reserved by message
*/
function depositForBurn(
uint256 _amount,
uint32 _destinationDomain,
bytes32 _mintRecipient,
address _burnToken
) external returns (uint64 _nonce);
/**
* @notice Deposits and burns tokens from sender to be minted on destination domain. The mint
* on the destination domain must be called by `_destinationCaller`.
* WARNING: if the `_destinationCaller` does not represent a valid address as bytes32, then it will not be possible
* to broadcast the message on the destination domain. This is an advanced feature, and the standard
* depositForBurn() should be preferred for use cases where a specific destination caller is not required.
* Emits a `DepositForBurn` event.
* @dev reverts if:
* - given destinationCaller is zero address
* - given burnToken is not supported
* - given destinationDomain has no TokenMessenger registered
* - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
* to this contract is less than `amount`.
* - burn() reverts. For example, if `amount` is 0.
* - MessageTransmitter returns false or reverts.
* @param _amount amount of tokens to burn
* @param _destinationDomain destination domain
* @param _mintRecipient address of mint recipient on destination domain
* @param _burnToken address of contract to burn deposited tokens, on local domain
* @param _destinationCaller caller on the destination domain, as bytes32
* @return _nonce unique nonce reserved by message
*/
function depositForBurnWithCaller(
uint256 _amount,
uint32 _destinationDomain,
bytes32 _mintRecipient,
address _burnToken,
bytes32 _destinationCaller
) external returns (uint64 _nonce);
}
// File contracts/middleware/liquidity-layer/interfaces/ILiquidityLayerAdapter.sol
pragma solidity ^0.8.13;
interface ILiquidityLayerAdapter {
function sendTokens(
uint32 _destinationDomain,
bytes32 _recipientAddress,
address _token,
uint256 _amount
) external returns (bytes memory _adapterData);
function receiveTokens(
uint32 _originDomain, // Hyperlane domain
address _recipientAddress,
uint256 _amount,
bytes calldata _adapterData // The adapter data from the message
) external returns (address, uint256);
}
// File contracts/middleware/liquidity-layer/adapters/CircleBridgeAdapter.sol
pragma solidity ^0.8.13;
contract CircleBridgeAdapter is ILiquidityLayerAdapter, Router {
using SafeERC20 for IERC20;
/// @notice The TokenMessenger contract.
ITokenMessenger public tokenMessenger;
/// @notice The Circle MessageTransmitter contract.
ICircleMessageTransmitter public circleMessageTransmitter;
/// @notice The LiquidityLayerRouter contract.
address public liquidityLayerRouter;
/// @notice Hyperlane domain => Circle domain.
/// ATM, known Circle domains are Ethereum = 0 and Avalanche = 1.
/// Note this could result in ambiguity between the Circle domain being
/// Ethereum or unknown.
mapping(uint32 => uint32) public hyperlaneDomainToCircleDomain;
/// @notice Token symbol => address of token on local chain.
mapping(string => IERC20) public tokenSymbolToAddress;
/// @notice Local chain token address => token symbol.
mapping(address => string) public tokenAddressToSymbol;
/**
* @notice Emits the nonce of the Circle message when a token is bridged.
* @param nonce The nonce of the Circle message.
*/
event BridgedToken(uint64 nonce);
/**
* @notice Emitted when the Hyperlane domain to Circle domain mapping is updated.
* @param hyperlaneDomain The Hyperlane domain.
* @param circleDomain The Circle domain.
*/
event DomainAdded(uint32 indexed hyperlaneDomain, uint32 circleDomain);
/**
* @notice Emitted when a local token and its token symbol have been added.
*/
event TokenAdded(address indexed token, string indexed symbol);
/**
* @notice Emitted when a local token and its token symbol have been removed.
*/
event TokenRemoved(address indexed token, string indexed symbol);
modifier onlyLiquidityLayerRouter() {
require(msg.sender == liquidityLayerRouter, "!liquidityLayerRouter");
_;
}
constructor(address _mailbox) Router(_mailbox) {}
/**
* @param _owner The new owner.
* @param _tokenMessenger The TokenMessenger contract.
* @param _circleMessageTransmitter The Circle MessageTransmitter contract.
* @param _liquidityLayerRouter The LiquidityLayerRouter contract.
*/
function initialize(
address _owner,
address _tokenMessenger,
address _circleMessageTransmitter,
address _liquidityLayerRouter
) external initializer {
__Ownable_init();
_transferOwnership(_owner);
tokenMessenger = ITokenMessenger(_tokenMessenger);
circleMessageTransmitter = ICircleMessageTransmitter(
_circleMessageTransmitter
);
liquidityLayerRouter = _liquidityLayerRouter;
}
function sendTokens(
uint32 _destinationDomain,
bytes32, // _recipientAddress, unused
address _token,
uint256 _amount
) external onlyLiquidityLayerRouter returns (bytes memory) {
string memory _tokenSymbol = tokenAddressToSymbol[_token];
require(
bytes(_tokenSymbol).length > 0,
"CircleBridgeAdapter: Unknown token"
);
uint32 _circleDomain = hyperlaneDomainToCircleDomain[
_destinationDomain
];
bytes32 _remoteRouter = _mustHaveRemoteRouter(_destinationDomain);
// Approve the token to Circle. We assume that the LiquidityLayerRouter
// has already transferred the token to this contract.
require(
IERC20(_token).approve(address(tokenMessenger), _amount),
"!approval"
);
uint64 _nonce = tokenMessenger.depositForBurn(
_amount,
_circleDomain,
_remoteRouter, // Mint to the remote router
_token
);
emit BridgedToken(_nonce);
return abi.encode(_nonce, _tokenSymbol);
}
// Returns the token and amount sent
function receiveTokens(
uint32 _originDomain, // Hyperlane domain
address _recipient,
uint256 _amount,
bytes calldata _adapterData // The adapter data from the message
) external onlyLiquidityLayerRouter returns (address, uint256) {
_mustHaveRemoteRouter(_originDomain);
// The origin Circle domain
uint32 _originCircleDomain = hyperlaneDomainToCircleDomain[
_originDomain
];
// Get the token symbol and nonce of the transfer from the _adapterData
(uint64 _nonce, string memory _tokenSymbol) = abi.decode(
_adapterData,
(uint64, string)
);
// Require the circle message to have been processed
bytes32 _nonceId = _circleNonceId(_originCircleDomain, _nonce);
require(
circleMessageTransmitter.usedNonces(_nonceId),
"Circle message not processed yet"
);
IERC20 _token = tokenSymbolToAddress[_tokenSymbol];
require(
address(_token) != address(0),
"CircleBridgeAdapter: Unknown token"
);
// Transfer the token out to the recipient
// Circle doesn't charge any fee, so we can safely transfer out the
// exact amount that was bridged over.
_token.safeTransfer(_recipient, _amount);
return (address(_token), _amount);
}
// This contract is only a Router to be aware of remote router addresses,
// and doesn't actually send/handle Hyperlane messages directly
function _handle(
uint32, // origin
bytes32, // sender
bytes calldata // message
) internal pure override {
revert("No messages expected");
}
function addDomain(uint32 _hyperlaneDomain, uint32 _circleDomain)
external
onlyOwner
{
hyperlaneDomainToCircleDomain[_hyperlaneDomain] = _circleDomain;
emit DomainAdded(_hyperlaneDomain, _circleDomain);
}
function addToken(address _token, string calldata _tokenSymbol)
external
onlyOwner
{
require(
_token != address(0) && bytes(_tokenSymbol).length > 0,
"Cannot add default values"
);
// Require the token and token symbol to be unset.
address _existingToken = address(tokenSymbolToAddress[_tokenSymbol]);
require(_existingToken == address(0), "token symbol already has token");
string memory _existingSymbol = tokenAddressToSymbol[_token];
require(
bytes(_existingSymbol).length == 0,
"token already has token symbol"
);
tokenAddressToSymbol[_token] = _tokenSymbol;
tokenSymbolToAddress[_tokenSymbol] = IERC20(_token);
emit TokenAdded(_token, _tokenSymbol);
}
function removeToken(address _token, string calldata _tokenSymbol)
external
onlyOwner
{
// Require the provided token and token symbols match what's in storage.
address _existingToken = address(tokenSymbolToAddress[_tokenSymbol]);
require(_existingToken == _token, "Token mismatch");
string memory _existingSymbol = tokenAddressToSymbol[_token];
require(
keccak256(bytes(_existingSymbol)) == keccak256(bytes(_tokenSymbol)),
"Token symbol mismatch"
);
// Delete them from storage.
delete tokenSymbolToAddress[_tokenSymbol];
delete tokenAddressToSymbol[_token];
emit TokenRemoved(_token, _tokenSymbol);
}
/**
* @notice Gets the Circle nonce ID by hashing _originCircleDomain and _nonce.
* @param _originCircleDomain Domain of chain where the transfer originated
* @param _nonce The unique identifier for the message from source to
destination
* @return hash of source and nonce
*/
function _circleNonceId(uint32 _originCircleDomain, uint64 _nonce)
internal
pure
returns (bytes32)
{
return keccak256(abi.encodePacked(_originCircleDomain, _nonce));
}
}
// File contracts/middleware/liquidity-layer/interfaces/portal/IPortalTokenBridge.sol
pragma solidity ^0.8.13;
// Portal's interface from their docs
interface IPortalTokenBridge {
struct Transfer {
uint8 payloadID;
uint256 amount;
bytes32 tokenAddress;
uint16 tokenChain;
bytes32 to;
uint16 toChain;
uint256 fee;
}
struct TransferWithPayload {
uint8 payloadID;
uint256 amount;
bytes32 tokenAddress;
uint16 tokenChain;
bytes32 to;
uint16 toChain;
bytes32 fromAddress;
bytes payload;
}
struct AssetMeta {
uint8 payloadID;
bytes32 tokenAddress;
uint16 tokenChain;
uint8 decimals;
bytes32 symbol;
bytes32 name;
}
struct RegisterChain {
bytes32 module;
uint8 action;
uint16 chainId;
uint16 emitterChainID;
bytes32 emitterAddress;
}
struct UpgradeContract {
bytes32 module;
uint8 action;
uint16 chainId;
bytes32 newContract;
}
struct RecoverChainId {
bytes32 module;
uint8 action;
uint256 evmChainId;
uint16 newChainId;
}
event ContractUpgraded(
address indexed oldContract,
address indexed newContract
);
function transferTokensWithPayload(
address token,
uint256 amount,
uint16 recipientChain,
bytes32 recipient,
uint32 nonce,
bytes memory payload
) external payable returns (uint64 sequence);
function completeTransferWithPayload(bytes memory encodedVm)
external
returns (bytes memory);
function parseTransferWithPayload(bytes memory encoded)
external
pure
returns (TransferWithPayload memory transfer);
function wrappedAsset(uint16 tokenChainId, bytes32 tokenAddress)
external
view
returns (address);
function isWrappedAsset(address token) external view returns (bool);
}
// File contracts/middleware/liquidity-layer/adapters/PortalAdapter.sol
pragma solidity ^0.8.13;
contract PortalAdapter is ILiquidityLayerAdapter, Router {
/// @notice The Portal TokenBridge contract.
IPortalTokenBridge public portalTokenBridge;
/// @notice The LiquidityLayerRouter contract.
address public liquidityLayerRouter;
/// @notice Hyperlane domain => Wormhole domain.
mapping(uint32 => uint16) public hyperlaneDomainToWormholeDomain;
/// @notice transferId => token address
mapping(bytes32 => address) public portalTransfersProcessed;
// We could technically use Portal's sequence number here but it doesn't
// get passed through, so we would have to parse the VAA twice
// 224 bits should be large enough and allows us to pack into a single slot
// with a Hyperlane domain
uint224 public nonce = 0;
constructor(address _mailbox) Router(_mailbox) {}
/**
* @notice Emits the nonce of the Portal message when a token is bridged.
* @param nonce The nonce of the Portal message.
* @param portalSequence The sequence of the Portal message.
* @param destination The hyperlane domain of the destination
*/
event BridgedToken(
uint256 nonce,
uint64 portalSequence,
uint32 destination
);
/**
* @notice Emitted when the Hyperlane domain to Wormhole domain mapping is updated.
* @param hyperlaneDomain The Hyperlane domain.
* @param wormholeDomain The Wormhole domain.
*/
event DomainAdded(uint32 indexed hyperlaneDomain, uint32 wormholeDomain);
modifier onlyLiquidityLayerRouter() {
require(msg.sender == liquidityLayerRouter, "!liquidityLayerRouter");
_;
}
/**
* @param _owner The new owner.
* @param _portalTokenBridge The Portal TokenBridge contract.
* @param _liquidityLayerRouter The LiquidityLayerRouter contract.
*/
function initialize(
address _owner,
address _portalTokenBridge,
address _liquidityLayerRouter
) public initializer {
// Transfer ownership of the contract to deployer
_transferOwnership(_owner);
portalTokenBridge = IPortalTokenBridge(_portalTokenBridge);
liquidityLayerRouter = _liquidityLayerRouter;
}
/**
* Sends tokens as requested by the router
* @param _destinationDomain The hyperlane domain of the destination
* @param _token The token address
* @param _amount The amount of tokens to send
*/
function sendTokens(
uint32 _destinationDomain,
bytes32, // _recipientAddress, unused
address _token,
uint256 _amount
) external onlyLiquidityLayerRouter returns (bytes memory) {
nonce = nonce + 1;
uint16 _wormholeDomain = hyperlaneDomainToWormholeDomain[
_destinationDomain
];
bytes32 _remoteRouter = _mustHaveRemoteRouter(_destinationDomain);
// Approve the token to Portal. We assume that the LiquidityLayerRouter
// has already transferred the token to this contract.
require(
IERC20(_token).approve(address(portalTokenBridge), _amount),
"!approval"
);
uint64 _portalSequence = portalTokenBridge.transferTokensWithPayload(
_token,
_amount,
_wormholeDomain,
_remoteRouter,
// Nonce for grouping Portal messages in the same tx, not relevant for us
// https://book.wormhole.com/technical/evm/coreLayer.html#emitting-a-vaa
0,
// Portal Payload used in completeTransfer
abi.encode(localDomain, nonce)
);
emit BridgedToken(nonce, _portalSequence, _destinationDomain);
return abi.encode(nonce);
}
/**
* Sends the tokens to the recipient as requested by the router
* @param _originDomain The hyperlane domain of the origin
* @param _recipient The address of the recipient
* @param _amount The amount of tokens to send
* @param _adapterData The adapter data from the origin chain, containing the nonce
*/
function receiveTokens(
uint32 _originDomain, // Hyperlane domain
address _recipient,
uint256 _amount,
bytes calldata _adapterData // The adapter data from the message
) external onlyLiquidityLayerRouter returns (address, uint256) {
// Get the nonce information from the adapterData
uint224 _nonce = abi.decode(_adapterData, (uint224));
address _tokenAddress = portalTransfersProcessed[
transferId(_originDomain, _nonce)
];
require(
_tokenAddress != address(0x0),
"Portal Transfer has not yet been completed"
);
IERC20 _token = IERC20(_tokenAddress);
// Transfer the token out to the recipient
// TODO: use safeTransfer
// Portal doesn't charge any fee, so we can safely transfer out the
// exact amount that was bridged over.
require(_token.transfer(_recipient, _amount), "!transfer out");
return (_tokenAddress, _amount);
}
/**
* Completes the Portal transfer which sends the funds to this adapter.
* The router can call receiveTokens to move those funds to the ultimate recipient.
* @param encodedVm The VAA from the Wormhole Guardians
*/
function completeTransfer(bytes memory encodedVm) public {
bytes memory _tokenBridgeTransferWithPayload = portalTokenBridge
.completeTransferWithPayload(encodedVm);
IPortalTokenBridge.TransferWithPayload
memory _transfer = portalTokenBridge.parseTransferWithPayload(
_tokenBridgeTransferWithPayload
);
(uint32 _originDomain, uint224 _nonce) = abi.decode(
_transfer.payload,
(uint32, uint224)
);
// Logic taken from here https://github.com/wormhole-foundation/wormhole/blob/dev.v2/ethereum/contracts/bridge/Bridge.sol#L503
address tokenAddress = _transfer.tokenChain ==
hyperlaneDomainToWormholeDomain[localDomain]
? TypeCasts.bytes32ToAddress(_transfer.tokenAddress)
: portalTokenBridge.wrappedAsset(
_transfer.tokenChain,
_transfer.tokenAddress
);
portalTransfersProcessed[
transferId(_originDomain, _nonce)
] = tokenAddress;
}
// This contract is only a Router to be aware of remote router addresses,
// and doesn't actually send/handle Hyperlane messages directly
function _handle(
uint32, // origin
bytes32, // sender
bytes calldata // message
) internal pure override {
revert("No messages expected");
}
function addDomain(uint32 _hyperlaneDomain, uint16 _wormholeDomain)
external
onlyOwner
{
hyperlaneDomainToWormholeDomain[_hyperlaneDomain] = _wormholeDomain;
emit DomainAdded(_hyperlaneDomain, _wormholeDomain);
}
/**
* The key that is used to track fulfilled Portal transfers
* @param _hyperlaneDomain The hyperlane of the origin
* @param _nonce The nonce of the adapter on the origin
*/
function transferId(uint32 _hyperlaneDomain, uint224 _nonce)
public
pure
returns (bytes32)
{
return bytes32(abi.encodePacked(_hyperlaneDomain, _nonce));
}
}
// File contracts/interfaces/ILiquidityLayerMessageRecipient.sol
pragma solidity ^0.8.13;
interface ILiquidityLayerMessageRecipient {
function handleWithTokens(
uint32 _origin,
bytes32 _sender,
bytes calldata _message,
address _token,
uint256 _amount
) external;
}
// File contracts/interfaces/ILiquidityLayerRouter.sol
pragma solidity >=0.6.11;
interface ILiquidityLayerRouter {
function dispatchWithTokens(
uint32 _destinationDomain,
bytes32 _recipientAddress,
address _token,
uint256 _amount,
string calldata _bridge,
bytes calldata _messageBody
) external returns (bytes32);
}
// File contracts/middleware/liquidity-layer/LiquidityLayerRouter.sol
pragma solidity ^0.8.13;
contract LiquidityLayerRouter is Router, ILiquidityLayerRouter {
using SafeERC20 for IERC20;
// Token bridge => adapter address
mapping(string => address) public liquidityLayerAdapters;
event LiquidityLayerAdapterSet(string indexed bridge, address adapter);
constructor(address _mailbox) Router(_mailbox) {}
/**
* @notice Initializes the Router contract with Hyperlane core contracts and the address of the interchain security module.
* @param _interchainGasPaymaster The address of the interchain gas paymaster contract.
* @param _interchainSecurityModule The address of the interchain security module contract.
* @param _owner The address with owner privileges.
*/
function initialize(
address _interchainGasPaymaster,
address _interchainSecurityModule,
address _owner
) external initializer {
_MailboxClient_initialize(
_interchainGasPaymaster,
_interchainSecurityModule,
_owner
);
}
function dispatchWithTokens(
uint32 _destinationDomain,
bytes32 _recipientAddress,
address _token,
uint256 _amount,
string calldata _bridge,
bytes calldata _messageBody
) external returns (bytes32) {
ILiquidityLayerAdapter _adapter = _getAdapter(_bridge);
// Transfer the tokens to the adapter
IERC20(_token).safeTransferFrom(msg.sender, address(_adapter), _amount);
// Reverts if the bridge was unsuccessful.
// Gets adapter-specific data that is encoded into the message
// ultimately sent via Hyperlane.
bytes memory _adapterData = _adapter.sendTokens(
_destinationDomain,
_recipientAddress,
_token,
_amount
);
// The user's message "wrapped" with metadata required by this middleware
bytes memory _messageWithMetadata = abi.encode(
TypeCasts.addressToBytes32(msg.sender),
_recipientAddress, // The "user" recipient
_amount, // The amount of the tokens sent over the bridge
_bridge, // The destination token bridge ID
_adapterData, // The adapter-specific data
_messageBody // The "user" message
);
// Dispatch the _messageWithMetadata to the destination's LiquidityLayerRouter.
return _dispatch(_destinationDomain, _messageWithMetadata);
}
// Handles a message from an enrolled remote LiquidityLayerRouter
function _handle(
uint32 _origin,
bytes32, // _sender, unused
bytes calldata _message
) internal override {
// Decode the message with metadata, "unwrapping" the user's message body
(
bytes32 _originalSender,
bytes32 _userRecipientAddress,
uint256 _amount,
string memory _bridge,
bytes memory _adapterData,
bytes memory _userMessageBody
) = abi.decode(
_message,
(bytes32, bytes32, uint256, string, bytes, bytes)
);
ILiquidityLayerMessageRecipient _userRecipient = ILiquidityLayerMessageRecipient(
TypeCasts.bytes32ToAddress(_userRecipientAddress)
);
// Reverts if the adapter hasn't received the bridged tokens yet
(address _token, uint256 _receivedAmount) = _getAdapter(_bridge)
.receiveTokens(
_origin,
address(_userRecipient),
_amount,
_adapterData
);
if (_userMessageBody.length > 0) {
_userRecipient.handleWithTokens(
_origin,
_originalSender,
_userMessageBody,
_token,
_receivedAmount
);
}
}
function setLiquidityLayerAdapter(string calldata _bridge, address _adapter)
external
onlyOwner
{
liquidityLayerAdapters[_bridge] = _adapter;
emit LiquidityLayerAdapterSet(_bridge, _adapter);
}
function _getAdapter(string memory _bridge)
internal
view
returns (ILiquidityLayerAdapter _adapter)
{
_adapter = ILiquidityLayerAdapter(liquidityLayerAdapters[_bridge]);
// Require the adapter to have been set
require(address(_adapter) != address(0), "No adapter found for bridge");
}
}
// File contracts/mock/MockToken.sol
pragma solidity ^0.8.13;
contract MockToken is ERC20Upgradeable {
function mint(address account, uint256 amount) external {
_mint(account, amount);
}
function burn(uint256 _amount) external {
_burn(msg.sender, _amount);
}
}
// File contracts/mock/MockCircleMessageTransmitter.sol
pragma solidity ^0.8.13;
contract MockCircleMessageTransmitter is ICircleMessageTransmitter {
mapping(bytes32 => bool) processedNonces;
MockToken token;
constructor(MockToken _token) {
token = _token;
}
function receiveMessage(bytes memory, bytes calldata)
external
pure
returns (bool success)
{
success = true;
}
function hashSourceAndNonce(uint32 _source, uint64 _nonce)
public
pure
returns (bytes32)
{
return keccak256(abi.encodePacked(_source, _nonce));
}
function process(
bytes32 _nonceId,
address _recipient,
uint256 _amount
) public {
processedNonces[_nonceId] = true;
token.mint(_recipient, _amount);
}
function usedNonces(bytes32 _nonceId) external view returns (bool) {
return processedNonces[_nonceId];
}
}
// File contracts/mock/MockCircleTokenMessenger.sol
pragma solidity ^0.8.13;
contract MockCircleTokenMessenger is ITokenMessenger {
uint64 public nextNonce = 0;
MockToken token;
constructor(MockToken _token) {
token = _token;
}
function depositForBurn(
uint256 _amount,
uint32,
bytes32,
address _burnToken
) external returns (uint64 _nonce) {
nextNonce = nextNonce + 1;
_nonce = nextNonce;
require(address(token) == _burnToken);
token.transferFrom(msg.sender, address(this), _amount);
token.burn(_amount);
}
function depositForBurnWithCaller(
uint256,
uint32,
bytes32,
address,
bytes32
) external returns (uint64 _nonce) {
nextNonce = nextNonce + 1;
_nonce = nextNonce;
}
}
// File contracts/mock/MockERC5164.sol
pragma solidity ^0.8.13;
contract MockMessageDispatcher is IMessageDispatcher {
function dispatchMessage(
uint256 toChainId,
address to,
bytes calldata data
) external returns (bytes32) {
bytes32 messageId = keccak256(abi.encodePacked(toChainId, to, data));
// simulate a successful dispatch
emit MessageDispatched(messageId, msg.sender, toChainId, to, data);
return messageId;
}
}
contract MockMessageExecutor {
event MessageIdExecuted(
uint256 indexed fromChainId,
bytes32 indexed messageId
);
}
// File contracts/test/TestIsm.sol
pragma solidity >=0.6.11;
contract TestIsm is IInterchainSecurityModule {
uint8 public moduleType = uint8(Types.NULL);
bool verifyResult = true;
function setVerify(bool _verify) public {
verifyResult = _verify;
}
function verify(bytes calldata, bytes calldata) public view returns (bool) {
return verifyResult;
}
}
// File contracts/test/TestPostDispatchHook.sol
pragma solidity >=0.8.0;
contract TestPostDispatchHook is AbstractPostDispatchHook {
// ============ Public Storage ============
// test fees for quoteDispatch
uint256 public fee = 0;
// ============ External Functions ============
/// @inheritdoc IPostDispatchHook
function hookType() external pure override returns (uint8) {
return uint8(IPostDispatchHook.Types.UNUSED);
}
function supportsMetadata(bytes calldata)
public
pure
override
returns (bool)
{
return true;
}
function setFee(uint256 _fee) external {
fee = _fee;
}
// ============ Internal functions ============
function _postDispatch(
bytes calldata,
/*metadata*/
bytes calldata /*message*/
) internal pure override {
// test - empty
}
function _quoteDispatch(
bytes calldata,
/*metadata*/
bytes calldata /*message*/
) internal view override returns (uint256) {
return fee;
}
}
// File contracts/mock/MockMailbox.sol
pragma solidity ^0.8.0;
contract MockMailbox is Mailbox {
using Message for bytes;
uint32 public inboundUnprocessedNonce = 0;
uint32 public inboundProcessedNonce = 0;
mapping(uint32 => MockMailbox) public remoteMailboxes;
mapping(uint256 => bytes) public inboundMessages;
constructor(uint32 _domain) Mailbox(_domain) {
TestIsm ism = new TestIsm();
defaultIsm = ism;
TestPostDispatchHook hook = new TestPostDispatchHook();
defaultHook = hook;
requiredHook = hook;
_transferOwnership(msg.sender);
_disableInitializers();
}
function addRemoteMailbox(uint32 _domain, MockMailbox _mailbox) external {
remoteMailboxes[_domain] = _mailbox;
}
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata metadata,
IPostDispatchHook hook
) public payable override returns (bytes32) {
bytes memory message = _buildMessage(
destinationDomain,
recipientAddress,
messageBody
);
bytes32 id = super.dispatch(
destinationDomain,
recipientAddress,
messageBody,
metadata,
hook
);
MockMailbox _destinationMailbox = remoteMailboxes[destinationDomain];
require(
address(_destinationMailbox) != address(0),
"Missing remote mailbox"
);
_destinationMailbox.addInboundMessage(message);
return id;
}
function addInboundMessage(bytes calldata message) external {
inboundMessages[inboundUnprocessedNonce] = message;
inboundUnprocessedNonce++;
}
function processNextInboundMessage() public {
bytes memory _message = inboundMessages[inboundProcessedNonce];
Mailbox(address(this)).process("", _message);
inboundProcessedNonce++;
}
}
// File contracts/test/TestInterchainGasPaymaster.sol
pragma solidity >=0.8.0;
// ============ Internal Imports ============
contract TestInterchainGasPaymaster is InterchainGasPaymaster {
uint256 public constant gasPrice = 10;
constructor() {
initialize(msg.sender, msg.sender);
}
function quoteGasPayment(uint32, uint256 gasAmount)
public
pure
override
returns (uint256)
{
return gasPrice * gasAmount;
}
}
// File contracts/mock/MockHyperlaneEnvironment.sol
pragma solidity ^0.8.13;
contract MockHyperlaneEnvironment {
uint32 originDomain;
uint32 destinationDomain;
mapping(uint32 => MockMailbox) public mailboxes;
mapping(uint32 => TestInterchainGasPaymaster) public igps;
mapping(uint32 => IInterchainSecurityModule) public isms;
constructor(uint32 _originDomain, uint32 _destinationDomain) {
originDomain = _originDomain;
destinationDomain = _destinationDomain;
MockMailbox originMailbox = new MockMailbox(_originDomain);
MockMailbox destinationMailbox = new MockMailbox(_destinationDomain);
originMailbox.addRemoteMailbox(_destinationDomain, destinationMailbox);
destinationMailbox.addRemoteMailbox(_originDomain, originMailbox);
isms[originDomain] = new TestIsm();
isms[destinationDomain] = new TestIsm();
originMailbox.setDefaultIsm(address(isms[originDomain]));
destinationMailbox.setDefaultIsm(address(isms[destinationDomain]));
igps[originDomain] = new TestInterchainGasPaymaster();
igps[destinationDomain] = new TestInterchainGasPaymaster();
originMailbox.transferOwnership(msg.sender);
destinationMailbox.transferOwnership(msg.sender);
mailboxes[_originDomain] = originMailbox;
mailboxes[_destinationDomain] = destinationMailbox;
}
function processNextPendingMessage() public {
mailboxes[destinationDomain].processNextInboundMessage();
}
function processNextPendingMessageFromDestination() public {
mailboxes[originDomain].processNextInboundMessage();
}
}
// File contracts/mock/MockPortalBridge.sol
pragma solidity ^0.8.13;
contract MockPortalBridge is IPortalTokenBridge {
uint256 nextNonce = 0;
MockToken token;
constructor(MockToken _token) {
token = _token;
}
function transferTokensWithPayload(
address,
uint256 amount,
uint16,
bytes32,
uint32,
bytes memory
) external payable returns (uint64 sequence) {
nextNonce = nextNonce + 1;
token.transferFrom(msg.sender, address(this), amount);
token.burn(amount);
return uint64(nextNonce);
}
function wrappedAsset(uint16, bytes32) external view returns (address) {
return address(token);
}
function isWrappedAsset(address) external pure returns (bool) {
return true;
}
function completeTransferWithPayload(bytes memory encodedVm)
external
returns (bytes memory)
{
(uint32 _originDomain, uint224 _nonce, uint256 _amount) = abi.decode(
encodedVm,
(uint32, uint224, uint256)
);
token.mint(msg.sender, _amount);
// Format it so that parseTransferWithPayload returns the desired payload
return
abi.encode(
TypeCasts.addressToBytes32(address(token)),
adapterData(_originDomain, _nonce, address(token))
);
}
function parseTransferWithPayload(bytes memory encoded)
external
pure
returns (TransferWithPayload memory transfer)
{
(bytes32 tokenAddress, bytes memory payload) = abi.decode(
encoded,
(bytes32, bytes)
);
transfer.payload = payload;
transfer.tokenAddress = tokenAddress;
}
function adapterData(
uint32 _originDomain,
uint224 _nonce,
address _token
) public pure returns (bytes memory) {
return
abi.encode(
_originDomain,
_nonce,
TypeCasts.addressToBytes32(_token)
);
}
function mockPortalVaa(
uint32 _originDomain,
uint224 _nonce,
uint256 _amount
) public pure returns (bytes memory) {
return abi.encode(_originDomain, _nonce, _amount);
}
}
// File contracts/test/ERC20Test.sol
pragma solidity >=0.8.0;
contract ERC20Test is ERC20 {
uint8 public immutable _decimals;
constructor(
string memory name,
string memory symbol,
uint256 totalSupply,
uint8 __decimals
) ERC20(name, symbol) {
_decimals = __decimals;
_mint(msg.sender, totalSupply);
}
function decimals() public view override returns (uint8) {
return _decimals;
}
}
// File contracts/test/ERC721Test.sol
pragma solidity >=0.8.0;
contract ERC721Test is ERC721Enumerable {
constructor(
string memory name,
string memory symbol,
uint256 _mintAmount
) ERC721(name, symbol) {
for (uint256 i = 0; i < _mintAmount; i++) {
_mint(msg.sender, i);
}
}
function _baseURI() internal pure override returns (string memory) {
return "TEST-BASE-URI";
}
}
// File contracts/test/TestRecipient.sol
pragma solidity >=0.8.0;
contract TestRecipient is
Ownable,
IMessageRecipient,
ISpecifiesInterchainSecurityModule
{
IInterchainSecurityModule public interchainSecurityModule;
bytes32 public lastSender;
bytes public lastData;
address public lastCaller;
string public lastCallMessage;
event ReceivedMessage(
uint32 indexed origin,
bytes32 indexed sender,
uint256 indexed value,
string message
);
event ReceivedCall(address indexed caller, uint256 amount, string message);
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _data
) external payable virtual override {
emit ReceivedMessage(_origin, _sender, msg.value, string(_data));
lastSender = _sender;
lastData = _data;
}
function fooBar(uint256 amount, string calldata message) external {
emit ReceivedCall(msg.sender, amount, message);
lastCaller = msg.sender;
lastCallMessage = message;
}
function setInterchainSecurityModule(address _ism) external onlyOwner {
interchainSecurityModule = IInterchainSecurityModule(_ism);
}
}
// File contracts/test/LightTestRecipient.sol
pragma solidity >=0.6.11;
contract LightTestRecipient is TestRecipient {
// solhint-disable-next-line no-empty-blocks
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _data
) external payable override {
// do nothing
}
}
// File contracts/test/TestGasRouter.sol
pragma solidity >=0.6.11;
contract TestGasRouter is GasRouter {
constructor(address _mailbox) GasRouter(_mailbox) {}
function dispatch(uint32 _destination, bytes memory _msg) external payable {
_dispatch(_destination, _msg);
}
function _handle(
uint32,
bytes32,
bytes calldata
) internal pure override {}
}
// File contracts/test/TestLiquidityLayerMessageRecipient.sol
pragma solidity ^0.8.13;
contract TestLiquidityLayerMessageRecipient is ILiquidityLayerMessageRecipient {
event HandledWithTokens(
uint32 origin,
bytes32 sender,
bytes message,
address token,
uint256 amount
);
function handleWithTokens(
uint32 _origin,
bytes32 _sender,
bytes calldata _message,
address _token,
uint256 _amount
) external {
emit HandledWithTokens(_origin, _sender, _message, _token, _amount);
}
}
// File contracts/test/TestMailbox.sol
pragma solidity >=0.8.0;
contract TestMailbox is Mailbox {
using TypeCasts for bytes32;
constructor(uint32 _localDomain) Mailbox(_localDomain) {
_transferOwnership(msg.sender);
}
function testHandle(
uint32 _origin,
bytes32 _sender,
bytes32 _recipient,
bytes calldata _body
) external {
IMessageRecipient(_recipient.bytes32ToAddress()).handle(
_origin,
_sender,
_body
);
}
function buildOutboundMessage(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata body
) external view returns (bytes memory) {
return _buildMessage(destinationDomain, recipientAddress, body);
}
function buildInboundMessage(
uint32 originDomain,
bytes32 recipientAddress,
bytes32 senderAddress,
bytes calldata body
) external view returns (bytes memory) {
return
Message.formatMessage(
VERSION,
nonce,
originDomain,
senderAddress,
localDomain,
recipientAddress,
body
);
}
function updateLatestDispatchedId(bytes32 _id) external {
latestDispatchedId = _id;
}
}
// File contracts/test/TestMerkle.sol
pragma solidity >=0.8.0;
contract TestMerkle {
using MerkleLib for MerkleLib.Tree;
MerkleLib.Tree public tree;
// solhint-disable-next-line no-empty-blocks
constructor() {}
function insert(bytes32 _node) external {
tree.insert(_node);
}
function branchRoot(
bytes32 _leaf,
bytes32[32] calldata _proof,
uint256 _index
) external pure returns (bytes32 _node) {
return MerkleLib.branchRoot(_leaf, _proof, _index);
}
/**
* @notice Returns the number of inserted leaves in the tree
*/
function count() public view returns (uint256) {
return tree.count;
}
function root() public view returns (bytes32) {
return tree.root();
}
}
// File contracts/test/TestMerkleTreeHook.sol
pragma solidity >=0.8.0;
contract TestMerkleTreeHook is MerkleTreeHook {
using MerkleLib for MerkleLib.Tree;
constructor(address _mailbox) MerkleTreeHook(_mailbox) {}
function proof() external view returns (bytes32[32] memory) {
bytes32[32] memory _zeroes = MerkleLib.zeroHashes();
uint256 _index = _tree.count - 1;
bytes32[32] memory _proof;
for (uint256 i = 0; i < 32; i++) {
uint256 _ithBit = (_index >> i) & 0x01;
if (_ithBit == 1) {
_proof[i] = _tree.branch[i];
} else {
_proof[i] = _zeroes[i];
}
}
return _proof;
}
function insert(bytes32 _id) external {
_tree.insert(_id);
}
}
// File contracts/test/TestMessage.sol
pragma solidity >=0.6.11;
contract TestMessage {
using Message for bytes;
function version(bytes calldata _message)
external
pure
returns (uint32 _version)
{
return _message.version();
}
function nonce(bytes calldata _message)
external
pure
returns (uint256 _nonce)
{
return _message.nonce();
}
function body(bytes calldata _message)
external
pure
returns (bytes calldata _body)
{
return _message.body();
}
function origin(bytes calldata _message)
external
pure
returns (uint32 _origin)
{
return _message.origin();
}
function sender(bytes calldata _message)
external
pure
returns (bytes32 _sender)
{
return _message.sender();
}
function destination(bytes calldata _message)
external
pure
returns (uint32 _destination)
{
return _message.destination();
}
function recipient(bytes calldata _message)
external
pure
returns (bytes32 _recipient)
{
return _message.recipient();
}
function recipientAddress(bytes calldata _message)
external
pure
returns (address _recipient)
{
return _message.recipientAddress();
}
function id(bytes calldata _message) external pure returns (bytes32) {
return _message.id();
}
}
// File contracts/test/TestQuery.sol
pragma solidity ^0.8.13;
contract TestQuery {
InterchainQueryRouter public router;
event Owner(uint256, address);
constructor(address _router) {
router = InterchainQueryRouter(_router);
}
/**
* @dev Fetches owner of InterchainQueryRouter on provided domain and passes along with provided secret to `this.receiveRouterOwner`
*/
function queryRouterOwner(uint32 domain, uint256 secret) external {
address target = TypeCasts.bytes32ToAddress(router.routers(domain));
CallLib.StaticCallWithCallback[]
memory calls = new CallLib.StaticCallWithCallback[](1);
calls[0] = CallLib.build(
target,
abi.encodeWithSelector(Ownable.owner.selector),
abi.encodeWithSelector(this.receiveRouterOwner.selector, secret)
);
router.query(domain, calls);
}
/**
* @dev `msg.sender` must be restricted to `this.router` to prevent any local account from spoofing query data.
*/
function receiveRouterOwner(uint256 secret, address owner) external {
require(msg.sender == address(router), "TestQuery: not from router");
emit Owner(secret, owner);
}
}
// File contracts/test/TestQuerySender.sol
pragma solidity >=0.8.0;
contract TestQuerySender {
InterchainQueryRouter queryRouter;
address public lastAddressResult;
uint256 public lastUint256Result;
bytes32 public lastBytes32Result;
event ReceivedAddressResult(address result);
event ReceivedUint256Result(uint256 result);
event ReceivedBytes32Result(bytes32 result);
function initialize(address _queryRouterAddress) external {
queryRouter = InterchainQueryRouter(_queryRouterAddress);
}
function queryAddress(
uint32 _destinationDomain,
address _target,
bytes calldata _targetData,
uint256 _gasAmount
) external payable {
queryAndPayFor(
_destinationDomain,
_target,
_targetData,
this.handleQueryAddressResult.selector,
_gasAmount
);
}
function handleQueryAddressResult(address _result) external {
emit ReceivedAddressResult(_result);
lastAddressResult = _result;
}
function queryUint256(
uint32 _destinationDomain,
address _target,
bytes calldata _targetData,
uint256 _gasAmount
) external payable {
queryAndPayFor(
_destinationDomain,
_target,
_targetData,
this.handleQueryUint256Result.selector,
_gasAmount
);
}
function handleQueryUint256Result(uint256 _result) external {
emit ReceivedUint256Result(_result);
lastUint256Result = _result;
}
function queryBytes32(
uint32 _destinationDomain,
address _target,
bytes calldata _targetData,
uint256 _gasAmount
) external payable {
queryAndPayFor(
_destinationDomain,
_target,
_targetData,
this.handleQueryBytes32Result.selector,
_gasAmount
);
}
function handleQueryBytes32Result(bytes32 _result) external {
emit ReceivedBytes32Result(_result);
lastBytes32Result = _result;
}
function queryAndPayFor(
uint32 _destinationDomain,
address _target,
bytes calldata _targetData,
bytes4 _callbackSelector,
uint256 /*_gasAmount*/
) internal {
queryRouter.query(
_destinationDomain,
_target,
_targetData,
abi.encodePacked(_callbackSelector)
);
}
}
// File contracts/test/TestRouter.sol
pragma solidity >=0.6.11;
contract TestRouter is Router {
event InitializeOverload();
constructor(address _mailbox) Router(_mailbox) {}
function initialize(address _hook, address _interchainSecurityModule)
public
initializer
{
_MailboxClient_initialize(_hook, _interchainSecurityModule, msg.sender);
}
function _handle(
uint32,
bytes32,
bytes calldata
) internal pure override {}
function isRemoteRouter(uint32 _domain, bytes32 _potentialRemoteRouter)
external
view
returns (bool)
{
return _isRemoteRouter(_domain, _potentialRemoteRouter);
}
function mustHaveRemoteRouter(uint32 _domain)
external
view
returns (bytes32)
{
return _mustHaveRemoteRouter(_domain);
}
function dispatch(uint32 _destination, bytes memory _msg) external payable {
_dispatch(_destination, _msg);
}
}
// File contracts/test/TestSendReceiver.sol
pragma solidity >=0.8.0;
contract TestSendReceiver is IMessageRecipient {
using TypeCasts for address;
uint256 public constant HANDLE_GAS_AMOUNT = 50_000;
event Handled(bytes32 blockHash);
function dispatchToSelf(
IMailbox _mailbox,
uint32 _destinationDomain,
bytes calldata _messageBody
) external payable {
bytes memory hookMetadata = StandardHookMetadata.formatMetadata(
HANDLE_GAS_AMOUNT,
msg.sender
);
// TODO: handle topping up?
_mailbox.dispatch{value: msg.value}(
_destinationDomain,
address(this).addressToBytes32(),
_messageBody,
hookMetadata
);
}
function dispatchToSelf(
IMailbox _mailbox,
uint32 _destinationDomain,
bytes calldata _messageBody,
IPostDispatchHook hook
) external payable {
bytes memory hookMetadata = StandardHookMetadata.formatMetadata(
HANDLE_GAS_AMOUNT,
msg.sender
);
// TODO: handle topping up?
_mailbox.dispatch{value: msg.value}(
_destinationDomain,
address(this).addressToBytes32(),
_messageBody,
hookMetadata,
hook
);
}
function handle(
uint32,
bytes32,
bytes calldata
) external payable override {
bytes32 blockHash = previousBlockHash();
bool isBlockHashEndIn0 = uint256(blockHash) % 16 == 0;
require(!isBlockHashEndIn0, "block hash ends in 0");
emit Handled(blockHash);
}
function previousBlockHash() internal view returns (bytes32) {
return blockhash(block.number - 1);
}
}
// File contracts/test/TestTokenRecipient.sol
pragma solidity >=0.8.0;
contract TestTokenRecipient is ILiquidityLayerMessageRecipient {
bytes32 public lastSender;
bytes public lastData;
address public lastToken;
uint256 public lastAmount;
address public lastCaller;
string public lastCallMessage;
event ReceivedMessage(
uint32 indexed origin,
bytes32 indexed sender,
string message,
address token,
uint256 amount
);
event ReceivedCall(address indexed caller, uint256 amount, string message);
function handleWithTokens(
uint32 _origin,
bytes32 _sender,
bytes calldata _data,
address _token,
uint256 _amount
) external override {
emit ReceivedMessage(_origin, _sender, string(_data), _token, _amount);
lastSender = _sender;
lastData = _data;
lastToken = _token;
lastAmount = _amount;
}
function fooBar(uint256 amount, string calldata message) external {
emit ReceivedCall(msg.sender, amount, message);
lastCaller = msg.sender;
lastCallMessage = message;
}
}
// File contracts/token/libs/TokenMessage.sol
pragma solidity >=0.8.0;
library TokenMessage {
function format(
bytes32 _recipient,
uint256 _amount,
bytes memory _metadata
) internal pure returns (bytes memory) {
return abi.encodePacked(_recipient, _amount, _metadata);
}
function recipient(bytes calldata message) internal pure returns (bytes32) {
return bytes32(message[0:32]);
}
function amount(bytes calldata message) internal pure returns (uint256) {
return uint256(bytes32(message[32:64]));
}
// alias for ERC721
function tokenId(bytes calldata message) internal pure returns (uint256) {
return amount(message);
}
function metadata(bytes calldata message)
internal
pure
returns (bytes calldata)
{
return message[64:];
}
}
// File contracts/token/libs/TokenRouter.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane Token Router that extends Router with abstract token (ERC20/ERC721) remote transfer functionality.
* @author Abacus Works
*/
abstract contract TokenRouter is GasRouter {
using TypeCasts for bytes32;
using TypeCasts for address;
using TokenMessage for bytes;
/**
* @dev Emitted on `transferRemote` when a transfer message is dispatched.
* @param destination The identifier of the destination chain.
* @param recipient The address of the recipient on the destination chain.
* @param amount The amount of tokens burnt on the origin chain.
*/
event SentTransferRemote(
uint32 indexed destination,
bytes32 indexed recipient,
uint256 amount
);
/**
* @dev Emitted on `_handle` when a transfer message is processed.
* @param origin The identifier of the origin chain.
* @param recipient The address of the recipient on the destination chain.
* @param amount The amount of tokens minted on the destination chain.
*/
event ReceivedTransferRemote(
uint32 indexed origin,
bytes32 indexed recipient,
uint256 amount
);
constructor(address _mailbox) GasRouter(_mailbox) {}
/**
* @notice Transfers `_amountOrId` token to `_recipient` on `_destination` domain.
* @dev Delegates transfer logic to `_transferFromSender` implementation.
* @dev Emits `SentTransferRemote` event on the origin chain.
* @param _destination The identifier of the destination chain.
* @param _recipient The address of the recipient on the destination chain.
* @param _amountOrId The amount or identifier of tokens to be sent to the remote recipient.
* @return messageId The identifier of the dispatched message.
*/
function transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId
) external payable virtual returns (bytes32 messageId) {
return
_transferRemote(_destination, _recipient, _amountOrId, msg.value);
}
/**
* @notice Transfers `_amountOrId` token to `_recipient` on `_destination` domain.
* @dev Delegates transfer logic to `_transferFromSender` implementation.
* @dev Emits `SentTransferRemote` event on the origin chain.
* @param _destination The identifier of the destination chain.
* @param _recipient The address of the recipient on the destination chain.
* @param _amountOrId The amount or identifier of tokens to be sent to the remote recipient.
* @param _gasPayment The amount of native token to pay for interchain gas.
* @return messageId The identifier of the dispatched message.
*/
function _transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId,
uint256 _gasPayment
) internal returns (bytes32 messageId) {
bytes memory metadata = _transferFromSender(_amountOrId);
messageId = _dispatch(
_destination,
_gasPayment,
TokenMessage.format(_recipient, _amountOrId, metadata)
);
emit SentTransferRemote(_destination, _recipient, _amountOrId);
}
/**
* @dev Should transfer `_amountOrId` of tokens from `msg.sender` to this token router.
* @dev Called by `transferRemote` before message dispatch.
* @dev Optionally returns `metadata` associated with the transfer to be passed in message.
*/
function _transferFromSender(uint256 _amountOrId)
internal
virtual
returns (bytes memory metadata);
/**
* @notice Returns the balance of `account` on this token router.
* @param account The address to query the balance of.
* @return The balance of `account`.
*/
function balanceOf(address account) external virtual returns (uint256);
/**
* @dev Mints tokens to recipient when router receives transfer message.
* @dev Emits `ReceivedTransferRemote` event on the destination chain.
* @param _origin The identifier of the origin chain.
* @param _message The encoded remote transfer message containing the recipient address and amount.
*/
function _handle(
uint32 _origin,
bytes32,
bytes calldata _message
) internal virtual override {
bytes32 recipient = _message.recipient();
uint256 amount = _message.amount();
bytes calldata metadata = _message.metadata();
_transferTo(recipient.bytes32ToAddress(), amount, metadata);
emit ReceivedTransferRemote(_origin, recipient, amount);
}
/**
* @dev Should transfer `_amountOrId` of tokens from this token router to `_recipient`.
* @dev Called by `handle` after message decoding.
* @dev Optionally handles `metadata` associated with transfer passed in message.
*/
function _transferTo(
address _recipient,
uint256 _amountOrId,
bytes calldata metadata
) internal virtual;
}
// File contracts/token/HypERC20.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC20 Token Router that extends ERC20 with remote transfer functionality.
* @author Abacus Works
* @dev Supply on each chain is not constant but the aggregate supply across all chains is.
*/
contract HypERC20 is ERC20Upgradeable, TokenRouter {
uint8 private immutable _decimals;
constructor(uint8 __decimals, address _mailbox) TokenRouter(_mailbox) {
_decimals = __decimals;
}
/**
* @notice Initializes the Hyperlane router, ERC20 metadata, and mints initial supply to deployer.
* @param _totalSupply The initial supply of the token.
* @param _name The name of the token.
* @param _symbol The symbol of the token.
*/
function initialize(
uint256 _totalSupply,
string memory _name,
string memory _symbol
) external initializer {
// Initialize ERC20 metadata
__ERC20_init(_name, _symbol);
_mint(msg.sender, _totalSupply);
}
function decimals() public view override returns (uint8) {
return _decimals;
}
function balanceOf(address _account)
public
view
virtual
override(TokenRouter, ERC20Upgradeable)
returns (uint256)
{
return ERC20Upgradeable.balanceOf(_account);
}
/**
* @dev Burns `_amount` of token from `msg.sender` balance.
* @inheritdoc TokenRouter
*/
function _transferFromSender(uint256 _amount)
internal
override
returns (bytes memory)
{
_burn(msg.sender, _amount);
return bytes(""); // no metadata
}
/**
* @dev Mints `_amount` of token to `_recipient` balance.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _amount,
bytes calldata // no metadata
) internal virtual override {
_mint(_recipient, _amount);
}
}
// File contracts/token/libs/FastTokenRouter.sol
pragma solidity >=0.8.0;
/**
* @title Common FastTokenRouter functionality for ERC20 Tokens with remote transfer support.
* @author Abacus Works
*/
abstract contract FastTokenRouter is TokenRouter {
using TypeCasts for bytes32;
using TokenMessage for bytes;
uint256 public fastTransferId;
// maps `fastTransferId` to the filler address.
mapping(bytes32 => address) filledFastTransfers;
/**
* @dev delegates transfer logic to `_transferTo`.
* @inheritdoc TokenRouter
*/
function _handle(
uint32 _origin,
bytes32,
bytes calldata _message
) internal virtual override {
bytes32 recipient = _message.recipient();
uint256 amount = _message.amount();
bytes calldata metadata = _message.metadata();
_transferTo(recipient.bytes32ToAddress(), amount, _origin, metadata);
emit ReceivedTransferRemote(_origin, recipient, amount);
}
/**
* @dev Transfers `_amount` of token to `_recipient`/`fastFiller` who provided LP.
* @dev Called by `handle` after message decoding.
*/
function _transferTo(
address _recipient,
uint256 _amount,
uint32 _origin,
bytes calldata _metadata
) internal virtual {
address _tokenRecipient = _getTokenRecipient(
_recipient,
_amount,
_origin,
_metadata
);
_fastTransferTo(_tokenRecipient, _amount);
}
/**
* @dev allows an external user to full an unfilled fast transfer order.
* @param _recipient The recepient of the wrapped token on base chain.
* @param _amount The amount of wrapped tokens that is being bridged.
* @param _fastFee The fee the bridging entity will pay.
* @param _fastTransferId Id assigned on the remote chain to uniquely identify the transfer.
*/
function fillFastTransfer(
address _recipient,
uint256 _amount,
uint256 _fastFee,
uint32 _origin,
uint256 _fastTransferId
) external virtual {
bytes32 filledFastTransfersKey = _getFastTransfersKey(
_origin,
_fastTransferId,
_amount,
_fastFee,
_recipient
);
require(
filledFastTransfers[filledFastTransfersKey] == address(0),
"request already filled"
);
filledFastTransfers[filledFastTransfersKey] = msg.sender;
_fastRecieveFrom(msg.sender, _amount - _fastFee);
_fastTransferTo(_recipient, _amount - _fastFee);
}
/**
* @dev Transfers `_amountOrId` token to `_recipient` on `_destination` domain.
* @dev Delegates transfer logic to `_fastTransferFromSender` implementation.
* @dev Emits `SentTransferRemote` event on the origin chain.
* @param _destination The identifier of the destination chain.
* @param _recipient The address of the recipient on the destination chain.
* @param _amountOrId The amount or identifier of tokens to be sent to the remote recipient.
* @return messageId The identifier of the dispatched message.
*/
function fastTransferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId,
uint256 _fastFee
) public payable virtual returns (bytes32 messageId) {
uint256 _fastTransferId = fastTransferId + 1;
fastTransferId = _fastTransferId;
bytes memory metadata = _fastTransferFromSender(
_amountOrId,
_fastFee,
_fastTransferId
);
messageId = _dispatch(
_destination,
TokenMessage.format(_recipient, _amountOrId, metadata)
);
emit SentTransferRemote(_destination, _recipient, _amountOrId);
}
/**
* @dev Burns `_amount` of token from `msg.sender` balance.
* @dev Pays `_fastFee` of tokens to LP on source chain.
* @dev Returns `fastFee` as bytes in the form of metadata.
*/
function _fastTransferFromSender(
uint256 _amount,
uint256 _fastFee,
uint256 _fastTransferId
) internal virtual returns (bytes memory) {
_fastRecieveFrom(msg.sender, _amount);
return abi.encode(_fastFee, _fastTransferId);
}
/**
* @dev returns an address that indicates who should recieve the bridged tokens.
* @dev if _fastFees was inlcuded and someone filled the order before the mailbox made the contract call, the filler gets the funds.
*/
function _getTokenRecipient(
address _recipient,
uint256 _amount,
uint32 _origin,
bytes calldata _metadata
) internal view returns (address) {
if (_metadata.length == 0) {
return _recipient;
}
// decode metadata to extract `_fastFee` and `_fastTransferId`.
(uint256 _fastFee, uint256 _fastTransferId) = abi.decode(
_metadata,
(uint256, uint256)
);
address _fillerAddress = filledFastTransfers[
_getFastTransfersKey(
_origin,
_fastTransferId,
_amount,
_fastFee,
_recipient
)
];
if (_fillerAddress != address(0)) {
return _fillerAddress;
}
return _recipient;
}
/**
* @dev generates the key for storing the filler address of fast transfers.
*/
function _getFastTransfersKey(
uint32 _origin,
uint256 _fastTransferId,
uint256 _amount,
uint256 _fastFee,
address _recipient
) internal pure returns (bytes32) {
return
keccak256(
abi.encodePacked(
_origin,
_fastTransferId,
_amount,
_fastFee,
_recipient
)
);
}
/**
* @dev Should transfer `_amount` of tokens to `_recipient`.
* @dev The implementation is delegated.
*/
function _fastTransferTo(address _recipient, uint256 _amount)
internal
virtual;
/**
* @dev Should collect `amount` of tokens from `_sender`.
* @dev The implementation is delegated.
*/
function _fastRecieveFrom(address _sender, uint256 _amount)
internal
virtual;
}
// File contracts/token/extensions/FastHypERC20.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC20 Token Router that extends ERC20 with remote transfer functionality.
* @author Abacus Works
* @dev Supply on each chain is not constant but the aggregate supply across all chains is.
*/
contract FastHypERC20 is FastTokenRouter, HypERC20 {
constructor(uint8 __decimals, address _mailbox)
HypERC20(__decimals, _mailbox)
{}
/**
* @dev delegates transfer logic to `_transferTo`.
* @inheritdoc TokenRouter
*/
function _handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) internal virtual override(FastTokenRouter, TokenRouter) {
FastTokenRouter._handle(_origin, _sender, _message);
}
/**
* @dev Mints `_amount` of tokens to `_recipient`.
* @inheritdoc FastTokenRouter
*/
function _fastTransferTo(address _recipient, uint256 _amount)
internal
override
{
_mint(_recipient, _amount);
}
/**
* @dev Burns `_amount` of tokens from `_recipient`.
* @inheritdoc FastTokenRouter
*/
function _fastRecieveFrom(address _sender, uint256 _amount)
internal
override
{
_burn(_sender, _amount);
}
function balanceOf(address _account)
public
view
virtual
override(HypERC20, TokenRouter)
returns (uint256)
{
return ERC20Upgradeable.balanceOf(_account);
}
}
// File contracts/token/HypERC20Collateral.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC20 Token Collateral that wraps an existing ERC20 with remote transfer functionality.
* @author Abacus Works
*/
contract HypERC20Collateral is TokenRouter {
using SafeERC20 for IERC20;
IERC20 public immutable wrappedToken;
/**
* @notice Constructor
* @param erc20 Address of the token to keep as collateral
*/
constructor(address erc20, address _mailbox) TokenRouter(_mailbox) {
wrappedToken = IERC20(erc20);
}
function balanceOf(address _account)
external
view
override
returns (uint256)
{
return wrappedToken.balanceOf(_account);
}
/**
* @dev Transfers `_amount` of `wrappedToken` from `msg.sender` to this contract.
* @inheritdoc TokenRouter
*/
function _transferFromSender(uint256 _amount)
internal
override
returns (bytes memory)
{
wrappedToken.safeTransferFrom(msg.sender, address(this), _amount);
return bytes(""); // no metadata
}
/**
* @dev Transfers `_amount` of `wrappedToken` from this contract to `_recipient`.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _amount,
bytes calldata // no metadata
) internal virtual override {
wrappedToken.safeTransfer(_recipient, _amount);
}
}
// File contracts/token/extensions/FastHypERC20Collateral.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC20 Token Collateral that wraps an existing ERC20 with remote transfer functionality.
* @author Abacus Works
*/
contract FastHypERC20Collateral is FastTokenRouter, HypERC20Collateral {
using SafeERC20 for IERC20;
/**
* @notice Constructor
* @param erc20 Address of the token to keep as collateral
*/
constructor(address erc20, address _mailbox)
HypERC20Collateral(erc20, _mailbox)
{}
/**
* @dev delegates transfer logic to `_transferTo`.
* @inheritdoc FastTokenRouter
*/
function _handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) internal virtual override(FastTokenRouter, TokenRouter) {
FastTokenRouter._handle(_origin, _sender, _message);
}
/**
* @dev Transfers `_amount` of `wrappedToken` to `_recipient`.
* @inheritdoc FastTokenRouter
*/
function _fastTransferTo(address _recipient, uint256 _amount)
internal
override
{
wrappedToken.safeTransfer(_recipient, _amount);
}
/**
* @dev Transfers in `_amount` of `wrappedToken` from `_recipient`.
* @inheritdoc FastTokenRouter
*/
function _fastRecieveFrom(address _sender, uint256 _amount)
internal
override
{
wrappedToken.safeTransferFrom(_sender, address(this), _amount);
}
}
// File contracts/token/HypERC721Collateral.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC721 Token Collateral that wraps an existing ERC721 with remote transfer functionality.
* @author Abacus Works
*/
contract HypERC721Collateral is TokenRouter {
IERC721 public immutable wrappedToken;
/**
* @notice Constructor
* @param erc721 Address of the token to keep as collateral
*/
constructor(address erc721, address _mailbox) TokenRouter(_mailbox) {
wrappedToken = IERC721(erc721);
}
function ownerOf(uint256 _tokenId) external view returns (address) {
return IERC721(wrappedToken).ownerOf(_tokenId);
}
/**
* @dev Returns the balance of `_account` for `wrappedToken`.
* @inheritdoc TokenRouter
*/
function balanceOf(address _account)
external
view
override
returns (uint256)
{
return IERC721(wrappedToken).balanceOf(_account);
}
/**
* @dev Transfers `_tokenId` of `wrappedToken` from `msg.sender` to this contract.
* @inheritdoc TokenRouter
*/
function _transferFromSender(uint256 _tokenId)
internal
virtual
override
returns (bytes memory)
{
// safeTransferFrom not used here because recipient is this contract
wrappedToken.transferFrom(msg.sender, address(this), _tokenId);
return bytes(""); // no metadata
}
/**
* @dev Transfers `_tokenId` of `wrappedToken` from this contract to `_recipient`.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _tokenId,
bytes calldata // no metadata
) internal override {
wrappedToken.safeTransferFrom(address(this), _recipient, _tokenId);
}
}
// File contracts/token/extensions/HypERC721URICollateral.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC721 Token Collateral that wraps an existing ERC721 with remote transfer and URI relay functionality.
* @author Abacus Works
*/
contract HypERC721URICollateral is HypERC721Collateral {
// solhint-disable-next-line no-empty-blocks
constructor(address erc721, address _mailbox)
HypERC721Collateral(erc721, _mailbox)
{}
/**
* @dev Transfers `_tokenId` of `wrappedToken` from `msg.sender` to this contract.
* @return The URI of `_tokenId` on `wrappedToken`.
* @inheritdoc HypERC721Collateral
*/
function _transferFromSender(uint256 _tokenId)
internal
override
returns (bytes memory)
{
HypERC721Collateral._transferFromSender(_tokenId);
return
bytes(
IERC721MetadataUpgradeable(address(wrappedToken)).tokenURI(
_tokenId
)
);
}
}
// File contracts/token/HypERC721.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC721 Token Router that extends ERC721 with remote transfer functionality.
* @author Abacus Works
*/
contract HypERC721 is ERC721EnumerableUpgradeable, TokenRouter {
constructor(address _mailbox) TokenRouter(_mailbox) {}
/**
* @notice Initializes the Hyperlane router, ERC721 metadata, and mints initial supply to deployer.
* @param _mintAmount The amount of NFTs to mint to `msg.sender`.
* @param _name The name of the token.
* @param _symbol The symbol of the token.
*/
function initialize(
uint256 _mintAmount,
string memory _name,
string memory _symbol
) external initializer {
address owner = msg.sender;
_transferOwnership(owner);
__ERC721_init(_name, _symbol);
for (uint256 i = 0; i < _mintAmount; i++) {
_safeMint(owner, i);
}
}
function balanceOf(address _account)
public
view
virtual
override(TokenRouter, ERC721Upgradeable, IERC721Upgradeable)
returns (uint256)
{
return ERC721Upgradeable.balanceOf(_account);
}
/**
* @dev Asserts `msg.sender` is owner and burns `_tokenId`.
* @inheritdoc TokenRouter
*/
function _transferFromSender(uint256 _tokenId)
internal
virtual
override
returns (bytes memory)
{
require(ownerOf(_tokenId) == msg.sender, "!owner");
_burn(_tokenId);
return bytes(""); // no metadata
}
/**
* @dev Mints `_tokenId` to `_recipient`.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _tokenId,
bytes calldata // no metadata
) internal virtual override {
_safeMint(_recipient, _tokenId);
}
}
// File contracts/token/extensions/HypERC721URIStorage.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane ERC721 Token that extends ERC721URIStorage with remote transfer and URI relay functionality.
* @author Abacus Works
*/
contract HypERC721URIStorage is HypERC721, ERC721URIStorageUpgradeable {
constructor(address _mailbox) HypERC721(_mailbox) {}
function balanceOf(address account)
public
view
override(HypERC721, ERC721Upgradeable)
returns (uint256)
{
return HypERC721.balanceOf(account);
}
/**
* @return _tokenURI The URI of `_tokenId`.
* @inheritdoc HypERC721
*/
function _transferFromSender(uint256 _tokenId)
internal
override
returns (bytes memory _tokenURI)
{
_tokenURI = bytes(tokenURI(_tokenId)); // requires minted
HypERC721._transferFromSender(_tokenId);
}
/**
* @dev Sets the URI for `_tokenId` to `_tokenURI`.
* @inheritdoc HypERC721
*/
function _transferTo(
address _recipient,
uint256 _tokenId,
bytes calldata _tokenURI
) internal override {
HypERC721._transferTo(_recipient, _tokenId, _tokenURI);
_setTokenURI(_tokenId, string(_tokenURI)); // requires minted
}
function tokenURI(uint256 tokenId)
public
view
override(ERC721Upgradeable, ERC721URIStorageUpgradeable)
returns (string memory)
{
return ERC721URIStorageUpgradeable.tokenURI(tokenId);
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId,
uint256 batchSize
) internal override(ERC721EnumerableUpgradeable, ERC721Upgradeable) {
ERC721EnumerableUpgradeable._beforeTokenTransfer(
from,
to,
tokenId,
batchSize
);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721EnumerableUpgradeable, ERC721Upgradeable)
returns (bool)
{
return ERC721EnumerableUpgradeable.supportsInterface(interfaceId);
}
function _burn(uint256 tokenId)
internal
override(ERC721URIStorageUpgradeable, ERC721Upgradeable)
{
ERC721URIStorageUpgradeable._burn(tokenId);
}
}
// File contracts/token/HypNative.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane Native Token Router that extends ERC20 with remote transfer functionality.
* @author Abacus Works
* @dev Supply on each chain is not constant but the aggregate supply across all chains is.
*/
contract HypNative is TokenRouter {
/**
* @dev Emitted when native tokens are donated to the contract.
* @param sender The address of the sender.
* @param amount The amount of native tokens donated.
*/
event Donation(address indexed sender, uint256 amount);
constructor(address _mailbox) TokenRouter(_mailbox) {}
/**
* @inheritdoc TokenRouter
* @dev uses (`msg.value` - `_amount`) as interchain gas payment and `msg.sender` as refund address.
*/
function transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amount
) public payable virtual override returns (bytes32 messageId) {
require(msg.value >= _amount, "Native: amount exceeds msg.value");
uint256 gasPayment = msg.value - _amount;
return _transferRemote(_destination, _recipient, _amount, gasPayment);
}
function balanceOf(address _account)
external
view
override
returns (uint256)
{
return _account.balance;
}
/**
* @inheritdoc TokenRouter
* @dev No-op because native amount is transferred in `msg.value`
* @dev Compiler will not include this in the bytecode.
*/
function _transferFromSender(uint256)
internal
pure
override
returns (bytes memory)
{
return bytes(""); // no metadata
}
/**
* @dev Sends `_amount` of native token to `_recipient` balance.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _amount,
bytes calldata // no metadata
) internal virtual override {
Address.sendValue(payable(_recipient), _amount);
}
receive() external payable {
emit Donation(msg.sender, msg.value);
}
}
// File contracts/token/extensions/HypNativeScaled.sol
pragma solidity >=0.8.0;
/**
* @title Hyperlane Native Token that scales native value by a fixed factor for consistency with other tokens.
* @dev The scale factor multiplies the `message.amount` to the local native token amount.
* Conversely, it divides the local native `msg.value` amount by `scale` to encode the `message.amount`.
* @author Abacus Works
*/
contract HypNativeScaled is HypNative {
uint256 public immutable scale;
constructor(uint256 _scale, address _mailbox) HypNative(_mailbox) {
scale = _scale;
}
/**
* @inheritdoc HypNative
* @dev Sends scaled `msg.value` (divided by `scale`) to `_recipient`.
*/
function transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amount
) public payable override returns (bytes32 messageId) {
require(msg.value >= _amount, "Native: amount exceeds msg.value");
uint256 gasPayment = msg.value - _amount;
uint256 scaledAmount = _amount / scale;
return
_transferRemote(_destination, _recipient, scaledAmount, gasPayment);
}
/**
* @dev Sends scaled `_amount` (multipled by `scale`) to `_recipient`.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _amount,
bytes calldata metadata // no metadata
) internal override {
uint256 scaledAmount = _amount * scale;
HypNative._transferTo(_recipient, scaledAmount, metadata);
}
}
// File contracts/upgrade/ProxyAdmin.sol
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/ProxyAdmin.sol)
pragma solidity ^0.8.0;
// File contracts/upgrade/TimelockController.sol
// OpenZeppelin Contracts (last updated v4.7.0) (governance/TimelockController.sol)
pragma solidity ^0.8.0;
// File contracts/upgrade/TransparentUpgradeableProxy.sol
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
// File contracts/interfaces/IRouter.sol
pragma solidity >=0.8.0;
interface IRouter {
function domains() external view returns (uint32[] memory);
function routers(uint32 _domain) external view returns (bytes32);
function enrollRemoteRouter(uint32 _domain, bytes32 _router) external;
function enrollRemoteRouters(
uint32[] calldata _domains,
bytes32[] calldata _routers
) external;
}
{
"compilationTarget": {
"MerkleTreeHook.sol": "MerkleTreeHook"
},
"evmVersion": "paris",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 999999
},
"remappings": []
}
[{"inputs":[{"internalType":"address","name":"_mailbox","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"messageId","type":"bytes32"},{"indexed":false,"internalType":"uint32","name":"index","type":"uint32"}],"name":"InsertedIntoTree","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"count","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deployedBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"hook","outputs":[{"internalType":"contract IPostDispatchHook","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"hookType","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"interchainSecurityModule","outputs":[{"internalType":"contract IInterchainSecurityModule","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"latestCheckpoint","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"},{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"localDomain","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mailbox","outputs":[{"internalType":"contract IMailbox","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes","name":"metadata","type":"bytes"},{"internalType":"bytes","name":"message","type":"bytes"}],"name":"postDispatch","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes","name":"metadata","type":"bytes"},{"internalType":"bytes","name":"message","type":"bytes"}],"name":"quoteDispatch","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"root","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_hook","type":"address"}],"name":"setHook","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_module","type":"address"}],"name":"setInterchainSecurityModule","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"metadata","type":"bytes"}],"name":"supportsMetadata","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tree","outputs":[{"components":[{"internalType":"bytes32[32]","name":"branch","type":"bytes32[32]"},{"internalType":"uint256","name":"count","type":"uint256"}],"internalType":"struct MerkleLib.Tree","name":"","type":"tuple"}],"stateMutability":"view","type":"function"}]