// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";

/**
 * @title EnumerableValues
 * @dev Library to extend the EnumerableSet library with functions to get
 * valuesAt for a range
 */
library EnumerableValues {
    using EnumerableSet for EnumerableSet.Bytes32Set;
    using EnumerableSet for EnumerableSet.AddressSet;
    using EnumerableSet for EnumerableSet.UintSet;

    /**
     * Returns an array of bytes32 values from the given set, starting at the given
     * start index and ending before the given end index.
     *
     * @param set The set to get the values from.
     * @param start The starting index.
     * @param end The ending index.
     * @return An array of bytes32 values.
     */
    function valuesAt(EnumerableSet.Bytes32Set storage set, uint256 start, uint256 end) internal view returns (bytes32[] memory) {
        uint256 max = set.length();
        if (end > max) { end = max; }

        bytes32[] memory items = new bytes32[](end - start);
        for (uint256 i = start; i < end; i++) {
            items[i - start] = set.at(i);
        }

        return items;
    }


    /**
     * Returns an array of address values from the given set, starting at the given
     * start index and ending before the given end index.
     *
     * @param set The set to get the values from.
     * @param start The starting index.
     * @param end The ending index.
     * @return An array of address values.
     */
    function valuesAt(EnumerableSet.AddressSet storage set, uint256 start, uint256 end) internal view returns (address[] memory) {
        uint256 max = set.length();
        if (end > max) { end = max; }

        address[] memory items = new address[](end - start);
        for (uint256 i = start; i < end; i++) {
            items[i - start] = set.at(i);
        }

        return items;
    }


    /**
     * Returns an array of uint256 values from the given set, starting at the given
     * start index and ending before the given end index, the item at the end index will not be returned.
     *
     * @param set The set to get the values from.
     * @param start The starting index (inclusive, item at the start index will be returned).
     * @param end The ending index (exclusive, item at the end index will not be returned).
     * @return An array of uint256 values.
     */
    function valuesAt(EnumerableSet.UintSet storage set, uint256 start, uint256 end) internal view returns (uint256[] memory) {
        if (start >= set.length()) {
            return new uint256[](0);
        }

        uint256 max = set.length();
        if (end > max) { end = max; }

        uint256[] memory items = new uint256[](end - start);
        for (uint256 i = start; i < end; i++) {
            items[i - start] = set.at(i);
        }

        return items;
    }
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

library Errors {
    // AdlUtils errors
    error InvalidSizeDeltaForAdl(uint256 sizeDeltaUsd, uint256 positionSizeInUsd);
    error AdlNotEnabled();

    // Bank errors
    error SelfTransferNotSupported(address receiver);
    error InvalidNativeTokenSender(address msgSender);

    // CallbackUtils errors
    error MaxCallbackGasLimitExceeded(uint256 callbackGasLimit, uint256 maxCallbackGasLimit);

    // Config errors
    error InvalidBaseKey(bytes32 baseKey);
    error InvalidFeeFactor(bytes32 baseKey, uint256 value);

    // Timelock errors
    error ActionAlreadySignalled();
    error ActionNotSignalled();
    error SignalTimeNotYetPassed(uint256 signalTime);
    error InvalidTimelockDelay(uint256 timelockDelay);
    error MaxTimelockDelayExceeded(uint256 timelockDelay);
    error InvalidFeeReceiver(address receiver);
    error InvalidOracleSigner(address receiver);

    // DepositStoreUtils errors
    error DepositNotFound(bytes32 key);

    // DepositUtils errors
    error EmptyDeposit();
    error EmptyDepositAmounts();

    // ExecuteDepositUtils errors
    error MinMarketTokens(uint256 received, uint256 expected);
    error EmptyDepositAmountsAfterSwap();
    error InvalidPoolValueForDeposit(int256 poolValue);
    error InvalidSwapOutputToken(address outputToken, address expectedOutputToken);

    // AdlHandler errors
    error AdlNotRequired(int256 pnlToPoolFactor, uint256 maxPnlFactorForAdl);
    error InvalidAdl(int256 nextPnlToPoolFactor, int256 pnlToPoolFactor);
    error PnlOvercorrected(int256 nextPnlToPoolFactor, uint256 minPnlFactorForAdl);

    // ExchangeUtils errors
    error RequestNotYetCancellable(uint256 requestAge, uint256 requestExpirationAge, string requestType);

    // OrderHandler errors
    error OrderNotUpdatable(uint256 orderType);
    error InvalidKeeperForFrozenOrder(address keeper);

    // FeatureUtils errors
    error DisabledFeature(bytes32 key);

    // FeeHandler errors
    error InvalidClaimFeesInput(uint256 marketsLength, uint256 tokensLength);

    // GasUtils errors
    error InsufficientExecutionFee(uint256 minExecutionFee, uint256 executionFee);
    error InsufficientWntAmountForExecutionFee(uint256 wntAmount, uint256 executionFee);
    error InsufficientExecutionGas(uint256 startingGas, uint256 minHandleErrorGas);

    // MarketFactory errors
    error MarketAlreadyExists(bytes32 salt, address existingMarketAddress);

    // MarketStoreUtils errors
    error MarketNotFound(address key);

    // MarketUtils errors
    error EmptyMarket();
    error DisabledMarket(address market);
    error MaxSwapPathLengthExceeded(uint256 swapPathLengh, uint256 maxSwapPathLength);
    error InsufficientPoolAmount(uint256 poolAmount, uint256 amount);
    error InsufficientReserve(uint256 reservedUsd, uint256 maxReservedUsd);
    error InsufficientReserveForOpenInterest(uint256 reservedUsd, uint256 maxReservedUsd);
    error UnableToGetOppositeToken(address inputToken, address market);
    error UnexpectedTokenForVirtualInventory(address token, address market);
    error EmptyMarketTokenSupply();
    error InvalidSwapMarket(address market);
    error UnableToGetCachedTokenPrice(address token, address market);
    error CollateralAlreadyClaimed(uint256 adjustedClaimableAmount, uint256 claimedAmount);
    error OpenInterestCannotBeUpdatedForSwapOnlyMarket(address market);
    error MaxOpenInterestExceeded(uint256 openInterest, uint256 maxOpenInterest);
    error MaxPoolAmountExceeded(uint256 poolAmount, uint256 maxPoolAmount);
    error UnexpectedBorrowingFactor(uint256 positionBorrowingFactor, uint256 cumulativeBorrowingFactor);
    error UnableToGetBorrowingFactorEmptyPoolUsd();
    error UnableToGetFundingFactorEmptyOpenInterest();
    error InvalidPositionMarket(address market);
    error InvalidCollateralTokenForMarket(address market, address token);
    error PnlFactorExceededForLongs(int256 pnlToPoolFactor, uint256 maxPnlFactor);
    error PnlFactorExceededForShorts(int256 pnlToPoolFactor, uint256 maxPnlFactor);
    error InvalidUiFeeFactor(uint256 uiFeeFactor, uint256 maxUiFeeFactor);
    error EmptyAddressInMarketTokenBalanceValidation(address market, address token);
    error InvalidMarketTokenBalance(address market, address token, uint256 balance, uint256 expectedMinBalance);
    error InvalidMarketTokenBalanceForCollateralAmount(address market, address token, uint256 balance, uint256 collateralAmount);
    error InvalidMarketTokenBalanceForClaimableFunding(address market, address token, uint256 balance, uint256 claimableFundingFeeAmount);
    error UnexpectedPoolValue(int256 poolValue);

    // Oracle errors
    error EmptySigner(uint256 signerIndex);
    error InvalidBlockNumber(uint256 minOracleBlockNumber, uint256 currentBlockNumber);
    error InvalidMinMaxBlockNumber(uint256 minOracleBlockNumber, uint256 maxOracleBlockNumber);
    error MaxPriceAgeExceeded(uint256 oracleTimestamp, uint256 currentTimestamp);
    error MinOracleSigners(uint256 oracleSigners, uint256 minOracleSigners);
    error MaxOracleSigners(uint256 oracleSigners, uint256 maxOracleSigners);
    error BlockNumbersNotSorted(uint256 minOracleBlockNumber, uint256 prevMinOracleBlockNumber);
    error MinPricesNotSorted(address token, uint256 price, uint256 prevPrice);
    error MaxPricesNotSorted(address token, uint256 price, uint256 prevPrice);
    error EmptyPriceFeedMultiplier(address token);
    error InvalidFeedPrice(address token, int256 price);
    error PriceFeedNotUpdated(address token, uint256 timestamp, uint256 heartbeatDuration);
    error MaxSignerIndex(uint256 signerIndex, uint256 maxSignerIndex);
    error InvalidOraclePrice(address token);
    error InvalidSignerMinMaxPrice(uint256 minPrice, uint256 maxPrice);
    error InvalidMedianMinMaxPrice(uint256 minPrice, uint256 maxPrice);
    error DuplicateTokenPrice(address token);
    error NonEmptyTokensWithPrices(uint256 tokensWithPricesLength);
    error EmptyPriceFeed(address token);
    error PriceAlreadySet(address token, uint256 minPrice, uint256 maxPrice);
    error MaxRefPriceDeviationExceeded(
        address token,
        uint256 price,
        uint256 refPrice,
        uint256 maxRefPriceDeviationFactor
    );

    // OracleModule errors
    error InvalidPrimaryPricesForSimulation(uint256 primaryTokensLength, uint256 primaryPricesLength);
    error EndOfOracleSimulation();

    // OracleUtils errors
    error EmptyCompactedPrice(uint256 index);
    error EmptyCompactedBlockNumber(uint256 index);
    error EmptyCompactedTimestamp(uint256 index);
    error InvalidSignature(address recoveredSigner, address expectedSigner);

    error EmptyPrimaryPrice(address token);

    error OracleBlockNumbersAreSmallerThanRequired(uint256[] oracleBlockNumbers, uint256 expectedBlockNumber);
    error OracleBlockNumberNotWithinRange(
        uint256[] minOracleBlockNumbers,
        uint256[] maxOracleBlockNumbers,
        uint256 blockNumber
    );

    // BaseOrderUtils errors
    error EmptyOrder();
    error UnsupportedOrderType();
    error InvalidOrderPrices(
        uint256 primaryPriceMin,
        uint256 primaryPriceMax,
        uint256 triggerPrice,
        uint256 orderType
    );
    error EmptySizeDeltaInTokens();
    error PriceImpactLargerThanOrderSize(int256 priceImpactUsd, uint256 sizeDeltaUsd);
    error NegativeExecutionPrice(int256 executionPrice, uint256 price, uint256 positionSizeInUsd, int256 priceImpactUsd, uint256 sizeDeltaUsd);
    error OrderNotFulfillableAtAcceptablePrice(uint256 price, uint256 acceptablePrice);

    // IncreaseOrderUtils errors
    error UnexpectedPositionState();

    // OrderUtils errors
    error OrderTypeCannotBeCreated(uint256 orderType);
    error OrderAlreadyFrozen();

    // OrderStoreUtils errors
    error OrderNotFound(bytes32 key);

    // SwapOrderUtils errors
    error UnexpectedMarket();

    // DecreasePositionCollateralUtils errors
    error InsufficientFundsToPayForCosts(uint256 remainingCostUsd, string step);
    error InvalidOutputToken(address tokenOut, address expectedTokenOut);

    // DecreasePositionUtils errors
    error InvalidDecreaseOrderSize(uint256 sizeDeltaUsd, uint256 positionSizeInUsd);
    error UnableToWithdrawCollateral(int256 estimatedRemainingCollateralUsd);
    error InvalidDecreasePositionSwapType(uint256 decreasePositionSwapType);
    error PositionShouldNotBeLiquidated();

    // IncreasePositionUtils errors
    error InsufficientCollateralAmount(uint256 collateralAmount, int256 collateralDeltaAmount);
    error InsufficientCollateralUsd(int256 remainingCollateralUsd);

    // PositionStoreUtils errors
    error PositionNotFound(bytes32 key);

    // PositionUtils errors
    error LiquidatablePosition(string reason);
    error EmptyPosition();
    error InvalidPositionSizeValues(uint256 sizeInUsd, uint256 sizeInTokens);
    error MinPositionSize(uint256 positionSizeInUsd, uint256 minPositionSizeUsd);

    // PositionPricingUtils errors
    error UsdDeltaExceedsLongOpenInterest(int256 usdDelta, uint256 longOpenInterest);
    error UsdDeltaExceedsShortOpenInterest(int256 usdDelta, uint256 shortOpenInterest);

    // SwapPricingUtils errors
    error UsdDeltaExceedsPoolValue(int256 usdDelta, uint256 poolUsd);

    // RoleModule errors
    error Unauthorized(address msgSender, string role);

    // RoleStore errors
    error ThereMustBeAtLeastOneRoleAdmin();
    error ThereMustBeAtLeastOneTimelockMultiSig();

    // ExchangeRouter errors
    error InvalidClaimFundingFeesInput(uint256 marketsLength, uint256 tokensLength);
    error InvalidClaimCollateralInput(uint256 marketsLength, uint256 tokensLength, uint256 timeKeysLength);
    error InvalidClaimAffiliateRewardsInput(uint256 marketsLength, uint256 tokensLength);
    error InvalidClaimUiFeesInput(uint256 marketsLength, uint256 tokensLength);

    // SwapUtils errors
    error InvalidTokenIn(address tokenIn, address market);
    error InsufficientOutputAmount(uint256 outputAmount, uint256 minOutputAmount);
    error InsufficientSwapOutputAmount(uint256 outputAmount, uint256 minOutputAmount);
    error DuplicatedMarketInSwapPath(address market);
    error SwapPriceImpactExceedsAmountIn(uint256 amountAfterFees, int256 negativeImpactAmount);

    // TokenUtils errors
    error EmptyTokenTranferGasLimit(address token);
    error TokenTransferError(address token, address receiver, uint256 amount);
    error EmptyHoldingAddress();

    // AccountUtils errors
    error EmptyAccount();
    error EmptyReceiver();

    // Array errors
    error CompactedArrayOutOfBounds(
        uint256[] compactedValues,
        uint256 index,
        uint256 slotIndex,
        string label
    );

    error ArrayOutOfBoundsUint256(
        uint256[] values,
        uint256 index,
        string label
    );

    error ArrayOutOfBoundsBytes(
        bytes[] values,
        uint256 index,
        string label
    );

    // WithdrawalStoreUtils errors
    error WithdrawalNotFound(bytes32 key);

    // WithdrawalUtils errors
    error EmptyWithdrawal();
    error EmptyWithdrawalAmount();
    error MinLongTokens(uint256 received, uint256 expected);
    error MinShortTokens(uint256 received, uint256 expected);
    error InsufficientMarketTokens(uint256 balance, uint256 expected);
    error InsufficientWntAmount(uint256 wntAmount, uint256 executionFee);
    error InvalidPoolValueForWithdrawal(int256 poolValue);

    // Uint256Mask errors
    error MaskIndexOutOfBounds(uint256 index, string label);
    error DuplicatedIndex(uint256 index, string label);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

/**
 * @title Role
 * @dev Library for role keys
 */
library Role {
    /**
     * @dev The ROLE_ADMIN role.
     */
    bytes32 public constant ROLE_ADMIN = keccak256(abi.encode("ROLE_ADMIN"));

    /**
     * @dev The TIMELOCK_ADMIN role.
     */
    bytes32 public constant TIMELOCK_ADMIN = keccak256(abi.encode("TIMELOCK_ADMIN"));

    /**
     * @dev The TIMELOCK_MULTISIG role.
     */
    bytes32 public constant TIMELOCK_MULTISIG = keccak256(abi.encode("TIMELOCK_MULTISIG"));

    /**
     * @dev The CONFIG_KEEPER role.
     */
    bytes32 public constant CONFIG_KEEPER = keccak256(abi.encode("CONFIG_KEEPER"));

    /**
     * @dev The CONTROLLER role.
     */
    bytes32 public constant CONTROLLER = keccak256(abi.encode("CONTROLLER"));

    /**
     * @dev The ROUTER_PLUGIN role.
     */
    bytes32 public constant ROUTER_PLUGIN = keccak256(abi.encode("ROUTER_PLUGIN"));

    /**
     * @dev The MARKET_KEEPER role.
     */
    bytes32 public constant MARKET_KEEPER = keccak256(abi.encode("MARKET_KEEPER"));

    /**
     * @dev The FEE_KEEPER role.
     */
    bytes32 public constant FEE_KEEPER = keccak256(abi.encode("FEE_KEEPER"));

    /**
     * @dev The ORDER_KEEPER role.
     */
    bytes32 public constant ORDER_KEEPER = keccak256(abi.encode("ORDER_KEEPER"));

    /**
     * @dev The FROZEN_ORDER_KEEPER role.
     */
    bytes32 public constant FROZEN_ORDER_KEEPER = keccak256(abi.encode("FROZEN_ORDER_KEEPER"));

    /**
     * @dev The PRICING_KEEPER role.
     */
    bytes32 public constant PRICING_KEEPER = keccak256(abi.encode("PRICING_KEEPER"));
    /**
     * @dev The LIQUIDATION_KEEPER role.
     */
    bytes32 public constant LIQUIDATION_KEEPER = keccak256(abi.encode("LIQUIDATION_KEEPER"));
    /**
     * @dev The ADL_KEEPER role.
     */
    bytes32 public constant ADL_KEEPER = keccak256(abi.encode("ADL_KEEPER"));
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

import "./RoleStore.sol";

/**
 * @title RoleModule
 * @dev Contract for role validation functions
 */
contract RoleModule {
    RoleStore public immutable roleStore;

    /**
     * @dev Constructor that initializes the role store for this contract.
     *
     * @param _roleStore The contract instance to use as the role store.
     */
    constructor(RoleStore _roleStore) {
        roleStore = _roleStore;
    }

    /**
     * @dev Only allows the contract's own address to call the function.
     */
    modifier onlySelf() {
        if (msg.sender != address(this)) {
            revert Errors.Unauthorized(msg.sender, "SELF");
        }
        _;
    }

    /**
     * @dev Only allows addresses with the TIMELOCK_MULTISIG role to call the function.
     */
    modifier onlyTimelockMultisig() {
        _validateRole(Role.TIMELOCK_MULTISIG, "TIMELOCK_MULTISIG");
        _;
    }

    /**
     * @dev Only allows addresses with the TIMELOCK_ADMIN role to call the function.
     */
    modifier onlyTimelockAdmin() {
        _validateRole(Role.TIMELOCK_ADMIN, "TIMELOCK_ADMIN");
        _;
    }

    /**
     * @dev Only allows addresses with the CONFIG_KEEPER role to call the function.
     */
    modifier onlyConfigKeeper() {
        _validateRole(Role.CONFIG_KEEPER, "CONFIG_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the CONTROLLER role to call the function.
     */
    modifier onlyController() {
        _validateRole(Role.CONTROLLER, "CONTROLLER");
        _;
    }

    /**
     * @dev Only allows addresses with the ROUTER_PLUGIN role to call the function.
     */
    modifier onlyRouterPlugin() {
        _validateRole(Role.ROUTER_PLUGIN, "ROUTER_PLUGIN");
        _;
    }

    /**
     * @dev Only allows addresses with the MARKET_KEEPER role to call the function.
     */
    modifier onlyMarketKeeper() {
        _validateRole(Role.MARKET_KEEPER, "MARKET_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the FEE_KEEPER role to call the function.
     */
    modifier onlyFeeKeeper() {
        _validateRole(Role.FEE_KEEPER, "FEE_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the ORDER_KEEPER role to call the function.
     */
    modifier onlyOrderKeeper() {
        _validateRole(Role.ORDER_KEEPER, "ORDER_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the PRICING_KEEPER role to call the function.
     */
    modifier onlyPricingKeeper() {
        _validateRole(Role.PRICING_KEEPER, "PRICING_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the LIQUIDATION_KEEPER role to call the function.
     */
    modifier onlyLiquidationKeeper() {
        _validateRole(Role.LIQUIDATION_KEEPER, "LIQUIDATION_KEEPER");
        _;
    }

    /**
     * @dev Only allows addresses with the ADL_KEEPER role to call the function.
     */
    modifier onlyAdlKeeper() {
        _validateRole(Role.ADL_KEEPER, "ADL_KEEPER");
        _;
    }

    /**
     * @dev Validates that the caller has the specified role.
     *
     * If the caller does not have the specified role, the transaction is reverted.
     *
     * @param role The key of the role to validate.
     * @param roleName The name of the role to validate.
     */
    function _validateRole(bytes32 role, string memory roleName) internal view {
        if (!roleStore.hasRole(msg.sender, role)) {
            revert Errors.Unauthorized(msg.sender, roleName);
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "../utils/EnumerableValues.sol";
import "./Role.sol";
import "../error/Errors.sol";

/**
 * @title RoleStore
 * @dev Stores roles and their members.
 */
contract RoleStore {
    using EnumerableSet for EnumerableSet.AddressSet;
    using EnumerableSet for EnumerableSet.Bytes32Set;
    using EnumerableValues for EnumerableSet.AddressSet;
    using EnumerableValues for EnumerableSet.Bytes32Set;

    EnumerableSet.Bytes32Set internal roles;
    mapping(bytes32 => EnumerableSet.AddressSet) internal roleMembers;
    // checking if an account has a role is a frequently used function
    // roleCache helps to save gas by offering a more efficient lookup
    // vs calling roleMembers[key].contains(account)
    mapping(address => mapping (bytes32 => bool)) roleCache;

    modifier onlyRoleAdmin() {
        if (!hasRole(msg.sender, Role.ROLE_ADMIN)) {
            revert Errors.Unauthorized(msg.sender, "ROLE_ADMIN");
        }
        _;
    }

    constructor() {
        _grantRole(msg.sender, Role.ROLE_ADMIN);
    }

    /**
     * @dev Grants the specified role to the given account.
     *
     * @param account The address of the account.
     * @param roleKey The key of the role to grant.
     */
    function grantRole(address account, bytes32 roleKey) external onlyRoleAdmin {
        _grantRole(account, roleKey);
    }

    /**
     * @dev Revokes the specified role from the given account.
     *
     * @param account The address of the account.
     * @param roleKey The key of the role to revoke.
     */
    function revokeRole(address account, bytes32 roleKey) external onlyRoleAdmin {
        _revokeRole(account, roleKey);
    }

    /**
     * @dev Returns true if the given account has the specified role.
     *
     * @param account The address of the account.
     * @param roleKey The key of the role.
     * @return True if the account has the role, false otherwise.
     */
    function hasRole(address account, bytes32 roleKey) public view returns (bool) {
        return roleCache[account][roleKey];
    }

    /**
     * @dev Returns the number of roles stored in the contract.
     *
     * @return The number of roles.
     */
    function getRoleCount() external view returns (uint256) {
        return roles.length();
    }

    /**
     * @dev Returns the keys of the roles stored in the contract.
     *
     * @param start The starting index of the range of roles to return.
     * @param end The ending index of the range of roles to return.
     * @return The keys of the roles.
     */
    function getRoles(uint256 start, uint256 end) external view returns (bytes32[] memory) {
        return roles.valuesAt(start, end);
    }

    /**
     * @dev Returns the number of members of the specified role.
     *
     * @param roleKey The key of the role.
     * @return The number of members of the role.
     */
    function getRoleMemberCount(bytes32 roleKey) external view returns (uint256) {
        return roleMembers[roleKey].length();
    }

    /**
     * @dev Returns the members of the specified role.
     *
     * @param roleKey The key of the role.
     * @param start the start index, the value for this index will be included.
     * @param end the end index, the value for this index will not be included.
     * @return The members of the role.
     */
    function getRoleMembers(bytes32 roleKey, uint256 start, uint256 end) external view returns (address[] memory) {
        return roleMembers[roleKey].valuesAt(start, end);
    }

    function _grantRole(address account, bytes32 roleKey) internal {
        roles.add(roleKey);
        roleMembers[roleKey].add(account);
        roleCache[account][roleKey] = true;
    }

    function _revokeRole(address account, bytes32 roleKey) internal {
        roleMembers[roleKey].remove(account);
        roleCache[account][roleKey] = false;

        if (roleMembers[roleKey].length() == 0) {
            if (roleKey == Role.ROLE_ADMIN) {
                revert Errors.ThereMustBeAtLeastOneRoleAdmin();
            }
            if (roleKey == Role.TIMELOCK_MULTISIG) {
                revert Errors.ThereMustBeAtLeastOneTimelockMultiSig();
            }
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import "../role/RoleModule.sol";

/**
 * @title Router
 * @dev Users will approve this router for token spenditures
 */
contract Router is RoleModule {
    using SafeERC20 for IERC20;

    constructor(RoleStore _roleStore) RoleModule(_roleStore) {}

    /**
     * @dev transfer the specified amount of tokens from the account to the receiver
     * @param token the token to transfer
     * @param account the account to transfer from
     * @param receiver the account to transfer to
     * @param amount the amount of tokens to transfer
     */
    function pluginTransfer(address token, address account, address receiver, uint256 amount) external onlyRouterPlugin {
        IERC20(token).safeTransferFrom(account, receiver, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "compilationTarget": {
    "contracts/router/Router.sol": "Router"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 10
  },
  "remappings": []
}