Catz N Dogz - PETZ

// Sources flattened with hardhat v2.11.1 https://hardhat.org

// File contracts/CatzNDogz.sol

// Sources flattened with hardhat v2.10.2 https://hardhat.org

// File @openzeppelin/contracts/utils/Context.sol@v4.8.3

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @limitbreak/creator-token-contracts/contracts/access/OwnablePermissions.sol@v1.1.2

pragma solidity ^0.8.4;

abstract contract OwnablePermissions is Context {
    function _requireCallerIsContractOwner() internal view virtual;
}


// File @openzeppelin/contracts/utils/introspection/IERC165.sol@v4.8.3

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/IEOARegistry.sol@v1.1.2

pragma solidity ^0.8.4;

interface IEOARegistry is IERC165 {
    function isVerifiedEOA(address account) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/utils/TransferPolicy.sol@v1.1.2

pragma solidity ^0.8.4;

enum AllowlistTypes {
    Operators,
    PermittedContractReceivers
}

enum ReceiverConstraints {
    None,
    NoCode,
    EOA
}

enum CallerConstraints {
    None,
    OperatorWhitelistEnableOTC,
    OperatorWhitelistDisableOTC
}

enum StakerConstraints {
    None,
    CallerIsTxOrigin,
    EOA
}

enum TransferSecurityLevels {
    Zero,
    One,
    Two,
    Three,
    Four,
    Five,
    Six
}

struct TransferSecurityPolicy {
    CallerConstraints callerConstraints;
    ReceiverConstraints receiverConstraints;
}

struct CollectionSecurityPolicy {
    TransferSecurityLevels transferSecurityLevel;
    uint120 operatorWhitelistId;
    uint120 permittedContractReceiversId;
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/ITransferSecurityRegistry.sol@v1.1.2

pragma solidity ^0.8.4;

interface ITransferSecurityRegistry {
    event AddedToAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event CreatedAllowlist(AllowlistTypes indexed kind, uint256 indexed id, string indexed name);
    event ReassignedAllowlistOwnership(AllowlistTypes indexed kind, uint256 indexed id, address indexed newOwner);
    event RemovedFromAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event SetAllowlist(AllowlistTypes indexed kind, address indexed collection, uint120 indexed id);
    event SetTransferSecurityLevel(address indexed collection, TransferSecurityLevels level);

    function createOperatorWhitelist(string calldata name) external returns (uint120);
    function createPermittedContractReceiverAllowlist(string calldata name) external returns (uint120);
    function reassignOwnershipOfOperatorWhitelist(uint120 id, address newOwner) external;
    function reassignOwnershipOfPermittedContractReceiverAllowlist(uint120 id, address newOwner) external;
    function renounceOwnershipOfOperatorWhitelist(uint120 id) external;
    function renounceOwnershipOfPermittedContractReceiverAllowlist(uint120 id) external;
    function setTransferSecurityLevelOfCollection(address collection, TransferSecurityLevels level) external;
    function setOperatorWhitelistOfCollection(address collection, uint120 id) external;
    function setPermittedContractReceiverAllowlistOfCollection(address collection, uint120 id) external;
    function addOperatorToWhitelist(uint120 id, address operator) external;
    function addPermittedContractReceiverToAllowlist(uint120 id, address receiver) external;
    function removeOperatorFromWhitelist(uint120 id, address operator) external;
    function removePermittedContractReceiverFromAllowlist(uint120 id, address receiver) external;
    function getCollectionSecurityPolicy(address collection) external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators(uint120 id) external view returns (address[] memory);
    function getPermittedContractReceivers(uint120 id) external view returns (address[] memory);
    function isOperatorWhitelisted(uint120 id, address operator) external view returns (bool);
    function isContractReceiverPermitted(uint120 id, address receiver) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/ITransferValidator.sol@v1.1.2

pragma solidity ^0.8.4;

interface ITransferValidator {
    function applyCollectionTransferPolicy(address caller, address from, address to) external view;
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/ICreatorTokenTransferValidator.sol@v1.1.2

pragma solidity ^0.8.4;



interface ICreatorTokenTransferValidator is ITransferSecurityRegistry, ITransferValidator, IEOARegistry {}


// File @limitbreak/creator-token-contracts/contracts/interfaces/ICreatorToken.sol@v1.1.2

pragma solidity ^0.8.4;

interface ICreatorToken {
    event TransferValidatorUpdated(address oldValidator, address newValidator);

    function getTransferValidator() external view returns (ICreatorTokenTransferValidator);
    function getSecurityPolicy() external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators() external view returns (address[] memory);
    function getPermittedContractReceivers() external view returns (address[] memory);
    function isOperatorWhitelisted(address operator) external view returns (bool);
    function isContractReceiverPermitted(address receiver) external view returns (bool);
    function isTransferAllowed(address caller, address from, address to) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/utils/TransferValidation.sol@v1.1.2

pragma solidity ^0.8.4;

/**
 * @title TransferValidation
 * @author Limit Break, Inc.
 * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks.
 * Openzeppelin's ERC721 contract only provides hooks for before and after transfer.  This allows
 * developers to validate or customize transfers within the context of a mint, a burn, or a transfer.
 */
abstract contract TransferValidation is Context {
    
    error ShouldNotMintToBurnAddress();

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}
}


// File @openzeppelin/contracts/interfaces/IERC165.sol@v4.8.3

// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;


// File @limitbreak/creator-token-contracts/contracts/utils/CreatorTokenBase.sol@v1.1.2

pragma solidity ^0.8.4;





/**
 * @title CreatorTokenBase
 * @author Limit Break, Inc.
 * @notice CreatorTokenBase is an abstract contract that provides basic functionality for managing token 
 * transfer policies through an implementation of ICreatorTokenTransferValidator. This contract is intended to be used
 * as a base for creator-specific token contracts, enabling customizable transfer restrictions and security policies.
 *
 * <h4>Features:</h4>
 * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul>
 * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul>
 * <ul>ICreatorToken: Implements the interface for creator tokens, providing view functions for token security policies.</ul>
 *
 * <h4>Benefits:</h4>
 * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul>
 * <ul>Allows creators to enforce policies such as whitelisted operators and permitted contract receivers.</ul>
 * <ul>Can be easily integrated into other token contracts as a base contract.</ul>
 *
 * <h4>Intended Usage:</h4>
 * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and 
 *   security policies.</ul>
 * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the 
 *   creator token.</ul>
 */
abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken {
    
    error CreatorTokenBase__InvalidTransferValidatorContract();
    error CreatorTokenBase__SetTransferValidatorFirst();

    address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x0000721C310194CcfC01E523fc93C9cCcFa2A0Ac);
    TransferSecurityLevels public constant DEFAULT_TRANSFER_SECURITY_LEVEL = TransferSecurityLevels.One;
    uint120 public constant DEFAULT_OPERATOR_WHITELIST_ID = uint120(1);

    ICreatorTokenTransferValidator private transferValidator;

    /**
     * @notice Allows the contract owner to set the transfer validator to the official validator contract
     *         and set the security policy to the recommended default settings.
     * @dev    May be overridden to change the default behavior of an individual collection.
     */
    function setToDefaultSecurityPolicy() public virtual {
        _requireCallerIsContractOwner();
        setTransferValidator(DEFAULT_TRANSFER_VALIDATOR);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setTransferSecurityLevelOfCollection(address(this), DEFAULT_TRANSFER_SECURITY_LEVEL);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setOperatorWhitelistOfCollection(address(this), DEFAULT_OPERATOR_WHITELIST_ID);
    }

    /**
     * @notice Allows the contract owner to set the transfer validator to a custom validator contract
     *         and set the security policy to their own custom settings.
     */
    function setToCustomValidatorAndSecurityPolicy(
        address validator, 
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        setTransferValidator(validator);

        ICreatorTokenTransferValidator(validator).
            setTransferSecurityLevelOfCollection(address(this), level);

        ICreatorTokenTransferValidator(validator).
            setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);

        ICreatorTokenTransferValidator(validator).
            setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Allows the contract owner to set the security policy to their own custom settings.
     * @dev    Reverts if the transfer validator has not been set.
     */
    function setToCustomSecurityPolicy(
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        ICreatorTokenTransferValidator validator = getTransferValidator();
        if (address(validator) == address(0)) {
            revert CreatorTokenBase__SetTransferValidatorFirst();
        }

        validator.setTransferSecurityLevelOfCollection(address(this), level);
        validator.setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);
        validator.setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Sets the transfer validator for the token contract.
     *
     * @dev    Throws when provided validator contract is not the zero address and doesn't support 
     *         the ICreatorTokenTransferValidator interface. 
     * @dev    Throws when the caller is not the contract owner.
     *
     * @dev    <h4>Postconditions:</h4>
     *         1. The transferValidator address is updated.
     *         2. The `TransferValidatorUpdated` event is emitted.
     *
     * @param transferValidator_ The address of the transfer validator contract.
     */
    function setTransferValidator(address transferValidator_) public {
        _requireCallerIsContractOwner();

        bool isValidTransferValidator = false;

        if(transferValidator_.code.length > 0) {
            try IERC165(transferValidator_).supportsInterface(type(ICreatorTokenTransferValidator).interfaceId) 
                returns (bool supportsInterface) {
                isValidTransferValidator = supportsInterface;
            } catch {}
        }

        if(transferValidator_ != address(0) && !isValidTransferValidator) {
            revert CreatorTokenBase__InvalidTransferValidatorContract();
        }

        emit TransferValidatorUpdated(address(transferValidator), transferValidator_);

        transferValidator = ICreatorTokenTransferValidator(transferValidator_);
    }

    /**
     * @notice Returns the transfer validator contract address for this token contract.
     */
    function getTransferValidator() public view override returns (ICreatorTokenTransferValidator) {
        return transferValidator;
    }

    /**
     * @notice Returns the security policy for this token contract, which includes:
     *         Transfer security level, operator whitelist id, permitted contract receiver allowlist id.
     */
    function getSecurityPolicy() public view override returns (CollectionSecurityPolicy memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getCollectionSecurityPolicy(address(this));
        }

        return CollectionSecurityPolicy({
            transferSecurityLevel: TransferSecurityLevels.Zero,
            operatorWhitelistId: 0,
            permittedContractReceiversId: 0
        });
    }

    /**
     * @notice Returns the list of all whitelisted operators for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getWhitelistedOperators() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getWhitelistedOperators(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId);
        }

        return new address[](0);
    }

    /**
     * @notice Returns the list of permitted contract receivers for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getPermittedContractReceivers() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getPermittedContractReceivers(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId);
        }

        return new address[](0);
    }

    /**
     * @notice Checks if an operator is whitelisted for this token contract.
     * @param operator The address of the operator to check.
     */
    function isOperatorWhitelisted(address operator) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isOperatorWhitelisted(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId, operator);
        }

        return false;
    }

    /**
     * @notice Checks if a contract receiver is permitted for this token contract.
     * @param receiver The address of the receiver to check.
     */
    function isContractReceiverPermitted(address receiver) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isContractReceiverPermitted(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId, receiver);
        }

        return false;
    }

    /**
     * @notice Determines if a transfer is allowed based on the token contract's security policy.  Use this function
     *         to simulate whether or not a transfer made by the specified `caller` from the `from` address to the `to`
     *         address would be allowed by this token's security policy.
     *
     * @notice This function only checks the security policy restrictions and does not check whether token ownership
     *         or approvals are in place. 
     *
     * @param caller The address of the simulated caller.
     * @param from   The address of the sender.
     * @param to     The address of the receiver.
     * @return       True if the transfer is allowed, false otherwise.
     */
    function isTransferAllowed(address caller, address from, address to) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            try transferValidator.applyCollectionTransferPolicy(caller, from, to) {
                return true;
            } catch {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 /*tokenId*/, 
        uint256 /*value*/) internal virtual override {
        if (address(transferValidator) != address(0)) {
            transferValidator.applyCollectionTransferPolicy(caller, from, to);
        }
    }
}


// File @openzeppelin/contracts/token/ERC721/IERC721.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}


// File @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol@v4.8.3

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}


// File @openzeppelin/contracts/utils/Address.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File @openzeppelin/contracts/utils/math/Math.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}


// File @openzeppelin/contracts/utils/Strings.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}


// File @openzeppelin/contracts/utils/introspection/ERC165.sol@v4.8.3

// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


// File @openzeppelin/contracts/token/ERC721/ERC721.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.2) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;







/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant
     * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such
     * that `ownerOf(tokenId)` is `a`.
     */
    // solhint-disable-next-line func-name-mixedcase
    function __unsafe_increaseBalance(address account, uint256 amount) internal {
        _balances[account] += amount;
    }
}


// File @limitbreak/creator-token-contracts/contracts/token/erc721/ERC721OpenZeppelin.sol@v1.1.2


pragma solidity ^0.8.4;


abstract contract ERC721OpenZeppelinBase is ERC721 {

    // Token name
    string internal _contractName;

    // Token symbol
    string internal _contractSymbol;

    function name() public view virtual override returns (string memory) {
        return _contractName;
    }

    function symbol() public view virtual override returns (string memory) {
        return _contractSymbol;
    }

    function _setNameAndSymbol(string memory name_, string memory symbol_) internal {
        _contractName = name_;
        _contractSymbol = symbol_;
    }
}

abstract contract ERC721OpenZeppelin is ERC721OpenZeppelinBase {
    constructor(string memory name_, string memory symbol_) ERC721("", "") {
        _setNameAndSymbol(name_, symbol_);
    }
}

abstract contract ERC721OpenZeppelinInitializable is OwnablePermissions, ERC721OpenZeppelinBase {

    error ERC721OpenZeppelinInitializable__AlreadyInitializedERC721();

    /// @notice Specifies whether or not the contract is initialized
    bool private _erc721Initialized;

    /// @dev Initializes parameters of ERC721 tokens.
    /// These cannot be set in the constructor because this contract is optionally compatible with EIP-1167.
    function initializeERC721(string memory name_, string memory symbol_) public {
        _requireCallerIsContractOwner();

        if(_erc721Initialized) {
            revert ERC721OpenZeppelinInitializable__AlreadyInitializedERC721();
        }

        _erc721Initialized = true;

        _setNameAndSymbol(name_, symbol_);
    }
}


// File @limitbreak/creator-token-contracts/contracts/erc721c/ERC721C.sol@v1.1.2

pragma solidity ^0.8.4;


/**
 * @title ERC721C
 * @author Limit Break, Inc.
 * @notice Extends OpenZeppelin's ERC721 implementation with Creator Token functionality, which
 *         allows the contract owner to update the transfer validation logic by managing a security policy in
 *         an external transfer validation security policy registry.  See {CreatorTokenTransferValidator}.
 */
abstract contract ERC721C is ERC721OpenZeppelin, CreatorTokenBase {

    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateBeforeTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateAfterTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }
}

/**
 * @title ERC721CInitializable
 * @author Limit Break, Inc.
 * @notice Initializable implementation of ERC721C to allow for EIP-1167 proxy clones.
 */
abstract contract ERC721CInitializable is ERC721OpenZeppelinInitializable, CreatorTokenBase {
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateBeforeTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateAfterTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }
}


// File erc721a/contracts/IERC721A.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    /**
     * `_sequentialUpTo()` must be greater than `_startTokenId()`.
     */
    error SequentialUpToTooSmall();

    /**
     * The `tokenId` of a sequential mint exceeds `_sequentialUpTo()`.
     */
    error SequentialMintExceedsLimit();

    /**
     * Spot minting requires a `tokenId` greater than `_sequentialUpTo()`.
     */
    error SpotMintTokenIdTooSmall();

    /**
     * Cannot mint over a token that already exists.
     */
    error TokenAlreadyExists();

    /**
     * The feature is not compatible with spot mints.
     */
    error NotCompatibleWithSpotMints();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}


// File erc721a/contracts/ERC721A.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * The `_sequentialUpTo()` function can be overriden to enable spot mints
 * (i.e. non-consecutive mints) for `tokenId`s greater than `_sequentialUpTo()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // The next token ID to be minted.
    uint256 private _currentIndex;

    // The number of tokens burned.
    uint256 private _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned.
    // See {_packedOwnershipOf} implementation for details.
    //
    // Bits Layout:
    // - [0..159]   `addr`
    // - [160..223] `startTimestamp`
    // - [224]      `burned`
    // - [225]      `nextInitialized`
    // - [232..255] `extraData`
    mapping(uint256 => uint256) private _packedOwnerships;

    // Mapping owner address to address data.
    //
    // Bits Layout:
    // - [0..63]    `balance`
    // - [64..127]  `numberMinted`
    // - [128..191] `numberBurned`
    // - [192..255] `aux`
    mapping(address => uint256) private _packedAddressData;

    // Mapping from token ID to approved address.
    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // The amount of tokens minted above `_sequentialUpTo()`.
    // We call these spot mints (i.e. non-sequential mints).
    uint256 private _spotMinted;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();

        if (_sequentialUpTo() < _startTokenId()) _revert(SequentialUpToTooSmall.selector);
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID for sequential mints.
     *
     * Override this function to change the starting token ID for sequential mints.
     *
     * Note: The value returned must never change after any tokens have been minted.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Returns the maximum token ID (inclusive) for sequential mints.
     *
     * Override this function to return a value less than 2**256 - 1,
     * but greater than `_startTokenId()`, to enable spot (non-sequential) mints.
     *
     * Note: The value returned must never change after any tokens have been minted.
     */
    function _sequentialUpTo() internal view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256 result) {
        // Counter underflow is impossible as `_burnCounter` cannot be incremented
        // more than `_currentIndex + _spotMinted - _startTokenId()` times.
        unchecked {
            // With spot minting, the intermediate `result` can be temporarily negative,
            // and the computation must be unchecked.
            result = _currentIndex - _burnCounter - _startTokenId();
            if (_sequentialUpTo() != type(uint256).max) result += _spotMinted;
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256 result) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            result = _currentIndex - _startTokenId();
            if (_sequentialUpTo() != type(uint256).max) result += _spotMinted;
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return _burnCounter;
    }

    /**
     * @dev Returns the total number of tokens that are spot-minted.
     */
    function _totalSpotMinted() internal view virtual returns (uint256) {
        return _spotMinted;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) _revert(BalanceQueryForZeroAddress.selector);
        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = _packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        _packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) _revert(URIQueryForNonexistentToken.selector);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnerships[index]);
    }

    /**
     * @dev Returns whether the ownership slot at `index` is initialized.
     * An uninitialized slot does not necessarily mean that the slot has no owner.
     */
    function _ownershipIsInitialized(uint256 index) internal view virtual returns (bool) {
        return _packedOwnerships[index] != 0;
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (_packedOwnerships[index] == 0) {
            _packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * @dev Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {
        if (_startTokenId() <= tokenId) {
            packed = _packedOwnerships[tokenId];

            if (tokenId > _sequentialUpTo()) {
                if (_packedOwnershipExists(packed)) return packed;
                _revert(OwnerQueryForNonexistentToken.selector);
            }

            // If the data at the starting slot does not exist, start the scan.
            if (packed == 0) {
                if (tokenId >= _currentIndex) _revert(OwnerQueryForNonexistentToken.selector);
                // Invariant:
                // There will always be an initialized ownership slot
                // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                // before an unintialized ownership slot
                // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                // Hence, `tokenId` will not underflow.
                //
                // We can directly compare the packed value.
                // If the address is zero, packed will be zero.
                for (;;) {
                    unchecked {
                        packed = _packedOwnerships[--tokenId];
                    }
                    if (packed == 0) continue;
                    if (packed & _BITMASK_BURNED == 0) return packed;
                    // Otherwise, the token is burned, and we must revert.
                    // This handles the case of batch burned tokens, where only the burned bit
                    // of the starting slot is set, and remaining slots are left uninitialized.
                    _revert(OwnerQueryForNonexistentToken.selector);
                }
            }
            // Otherwise, the data exists and we can skip the scan.
            // This is possible because we have already achieved the target condition.
            // This saves 2143 gas on transfers of initialized tokens.
            // If the token is not burned, return `packed`. Otherwise, revert.
            if (packed & _BITMASK_BURNED == 0) return packed;
        }
        _revert(OwnerQueryForNonexistentToken.selector);
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        _approve(to, tokenId, true);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) _revert(ApprovalQueryForNonexistentToken.selector);

        return _tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool result) {
        if (_startTokenId() <= tokenId) {
            if (tokenId > _sequentialUpTo()) return _packedOwnershipExists(_packedOwnerships[tokenId]);

            if (tokenId < _currentIndex) {
                uint256 packed;
                while ((packed = _packedOwnerships[tokenId]) == 0) --tokenId;
                result = packed & _BITMASK_BURNED == 0;
            }
        }
    }

    /**
     * @dev Returns whether `packed` represents a token that exists.
     */
    function _packedOwnershipExists(uint256 packed) private pure returns (bool result) {
        assembly {
            // The following is equivalent to `owner != address(0) && burned == false`.
            // Symbolically tested.
            result := gt(and(packed, _BITMASK_ADDRESS), and(packed, _BITMASK_BURNED))
        }
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        // Mask `from` to the lower 160 bits, in case the upper bits somehow aren't clean.
        from = address(uint160(uint256(uint160(from)) & _BITMASK_ADDRESS));

        if (address(uint160(prevOwnershipPacked)) != from) _revert(TransferFromIncorrectOwner.selector);

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) _revert(TransferCallerNotOwnerNorApproved.selector);

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --_packedAddressData[from]; // Updates: `balance -= 1`.
            ++_packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
        uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;
        assembly {
            // Emit the `Transfer` event.
            log4(
                0, // Start of data (0, since no data).
                0, // End of data (0, since no data).
                _TRANSFER_EVENT_SIGNATURE, // Signature.
                from, // `from`.
                toMasked, // `to`.
                tokenId // `tokenId`.
            )
        }
        if (toMasked == 0) _revert(TransferToZeroAddress.selector);

        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                _revert(TransferToNonERC721ReceiverImplementer.selector);
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
            bytes4 retval
        ) {
            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                _revert(TransferToNonERC721ReceiverImplementer.selector);
            }
            assembly {
                revert(add(32, reason), mload(reason))
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (quantity == 0) _revert(MintZeroQuantity.selector);

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
            uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;

            if (toMasked == 0) _revert(MintToZeroAddress.selector);

            uint256 end = startTokenId + quantity;
            uint256 tokenId = startTokenId;

            if (end - 1 > _sequentialUpTo()) _revert(SequentialMintExceedsLimit.selector);

            do {
                assembly {
                    // Emit the `Transfer` event.
                    log4(
                        0, // Start of data (0, since no data).
                        0, // End of data (0, since no data).
                        _TRANSFER_EVENT_SIGNATURE, // Signature.
                        0, // `address(0)`.
                        toMasked, // `to`.
                        tokenId // `tokenId`.
                    )
                }
                // The `!=` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
            } while (++tokenId != end);

            _currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) _revert(MintToZeroAddress.selector);
        if (quantity == 0) _revert(MintZeroQuantity.selector);
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) _revert(MintERC2309QuantityExceedsLimit.selector);

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            if (startTokenId + quantity - 1 > _sequentialUpTo()) _revert(SequentialMintExceedsLimit.selector);

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            _currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = _currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        _revert(TransferToNonERC721ReceiverImplementer.selector);
                    }
                } while (index < end);
                // This prevents reentrancy to `_safeMint`.
                // It does not prevent reentrancy to `_safeMintSpot`.
                if (_currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    /**
     * @dev Mints a single token at `tokenId`.
     *
     * Note: A spot-minted `tokenId` that has been burned can be re-minted again.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` must be greater than `_sequentialUpTo()`.
     * - `tokenId` must not exist.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mintSpot(address to, uint256 tokenId) internal virtual {
        if (tokenId <= _sequentialUpTo()) _revert(SpotMintTokenIdTooSmall.selector);
        uint256 prevOwnershipPacked = _packedOwnerships[tokenId];
        if (_packedOwnershipExists(prevOwnershipPacked)) _revert(TokenAlreadyExists.selector);

        _beforeTokenTransfers(address(0), to, tokenId, 1);

        // Overflows are incredibly unrealistic.
        // The `numberMinted` for `to` is incremented by 1, and has a max limit of 2**64 - 1.
        // `_spotMinted` is incremented by 1, and has a max limit of 2**256 - 1.
        unchecked {
            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `true` (as `quantity == 1`).
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(1) | _nextExtraData(address(0), to, prevOwnershipPacked)
            );

            // Updates:
            // - `balance += 1`.
            // - `numberMinted += 1`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += (1 << _BITPOS_NUMBER_MINTED) | 1;

            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
            uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;

            if (toMasked == 0) _revert(MintToZeroAddress.selector);

            assembly {
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    tokenId // `tokenId`.
                )
            }

            ++_spotMinted;
        }

        _afterTokenTransfers(address(0), to, tokenId, 1);
    }

    /**
     * @dev Safely mints a single token at `tokenId`.
     *
     * Note: A spot-minted `tokenId` that has been burned can be re-minted again.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}.
     * - `tokenId` must be greater than `_sequentialUpTo()`.
     * - `tokenId` must not exist.
     *
     * See {_mintSpot}.
     *
     * Emits a {Transfer} event.
     */
    function _safeMintSpot(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mintSpot(to, tokenId);

        unchecked {
            if (to.code.length != 0) {
                uint256 currentSpotMinted = _spotMinted;
                if (!_checkContractOnERC721Received(address(0), to, tokenId, _data)) {
                    _revert(TransferToNonERC721ReceiverImplementer.selector);
                }
                // This prevents reentrancy to `_safeMintSpot`.
                // It does not prevent reentrancy to `_safeMint`.
                if (_spotMinted != currentSpotMinted) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMintSpot(to, tokenId, '')`.
     */
    function _safeMintSpot(address to, uint256 tokenId) internal virtual {
        _safeMintSpot(to, tokenId, '');
    }

    // =============================================================
    //                       APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_approve(to, tokenId, false)`.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _approve(to, tokenId, false);
    }

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        bool approvalCheck
    ) internal virtual {
        address owner = ownerOf(tokenId);

        if (approvalCheck && _msgSenderERC721A() != owner)
            if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                _revert(ApprovalCallerNotOwnerNorApproved.selector);
            }

        _tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) _revert(TransferCallerNotOwnerNorApproved.selector);
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as `_burnCounter` cannot be exceed `_currentIndex + _spotMinted` times.
        unchecked {
            _burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = _packedOwnerships[index];
        if (packed == 0) _revert(OwnershipNotInitializedForExtraData.selector);
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        _packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }

    /**
     * @dev For more efficient reverts.
     */
    function _revert(bytes4 errorSelector) internal pure {
        assembly {
            mstore(0x00, errorSelector)
            revert(0x00, 0x04)
        }
    }
}


// File erc721a/contracts/extensions/IERC721ABurnable.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721ABurnable.
 */
interface IERC721ABurnable is IERC721A {
    /**
     * @dev Burns `tokenId`. See {ERC721A-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) external;
}


// File erc721a/contracts/extensions/ERC721ABurnable.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;


/**
 * @title ERC721ABurnable.
 *
 * @dev ERC721A token that can be irreversibly burned (destroyed).
 */
abstract contract ERC721ABurnable is ERC721A, IERC721ABurnable {
    /**
     * @dev Burns `tokenId`. See {ERC721A-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual override {
        _burn(tokenId, true);
    }
}


// File erc721a/contracts/extensions/IERC721AQueryable.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721AQueryable.
 */
interface IERC721AQueryable is IERC721A {
    /**
     * Invalid query range (`start` >= `stop`).
     */
    error InvalidQueryRange();

    /**
     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
     *
     * If the `tokenId` is out of bounds:
     *
     * - `addr = address(0)`
     * - `startTimestamp = 0`
     * - `burned = false`
     * - `extraData = 0`
     *
     * If the `tokenId` is burned:
     *
     * - `addr = <Address of owner before token was burned>`
     * - `startTimestamp = <Timestamp when token was burned>`
     * - `burned = true`
     * - `extraData = <Extra data when token was burned>`
     *
     * Otherwise:
     *
     * - `addr = <Address of owner>`
     * - `startTimestamp = <Timestamp of start of ownership>`
     * - `burned = false`
     * - `extraData = <Extra data at start of ownership>`
     */
    function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);

    /**
     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
     * See {ERC721AQueryable-explicitOwnershipOf}
     */
    function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);

    /**
     * @dev Returns an array of token IDs owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * This function allows for tokens to be queried if the collection
     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
     *
     * Requirements:
     *
     * - `start < stop`
     */
    function tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) external view returns (uint256[] memory);

    /**
     * @dev Returns an array of token IDs owned by `owner`.
     *
     * This function scans the ownership mapping and is O(`totalSupply`) in complexity.
     * It is meant to be called off-chain.
     *
     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
     * multiple smaller scans if the collection is large enough to cause
     * an out-of-gas error (10K collections should be fine).
     */
    function tokensOfOwner(address owner) external view returns (uint256[] memory);
}


// File erc721a/contracts/extensions/ERC721AQueryable.sol@v4.3.0

// ERC721A Contracts v4.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;


/**
 * @title ERC721AQueryable.
 *
 * @dev ERC721A subclass with convenience query functions.
 */
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
    /**
     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
     *
     * If the `tokenId` is out of bounds:
     *
     * - `addr = address(0)`
     * - `startTimestamp = 0`
     * - `burned = false`
     * - `extraData = 0`
     *
     * If the `tokenId` is burned:
     *
     * - `addr = <Address of owner before token was burned>`
     * - `startTimestamp = <Timestamp when token was burned>`
     * - `burned = true`
     * - `extraData = <Extra data when token was burned>`
     *
     * Otherwise:
     *
     * - `addr = <Address of owner>`
     * - `startTimestamp = <Timestamp of start of ownership>`
     * - `burned = false`
     * - `extraData = <Extra data at start of ownership>`
     */
    function explicitOwnershipOf(uint256 tokenId)
        public
        view
        virtual
        override
        returns (TokenOwnership memory ownership)
    {
        unchecked {
            if (tokenId >= _startTokenId()) {
                if (tokenId > _sequentialUpTo()) return _ownershipAt(tokenId);

                if (tokenId < _nextTokenId()) {
                    // If the `tokenId` is within bounds,
                    // scan backwards for the initialized ownership slot.
                    while (!_ownershipIsInitialized(tokenId)) --tokenId;
                    return _ownershipAt(tokenId);
                }
            }
        }
    }

    /**
     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
     * See {ERC721AQueryable-explicitOwnershipOf}
     */
    function explicitOwnershipsOf(uint256[] calldata tokenIds)
        external
        view
        virtual
        override
        returns (TokenOwnership[] memory)
    {
        TokenOwnership[] memory ownerships;
        uint256 i = tokenIds.length;
        assembly {
            // Grab the free memory pointer.
            ownerships := mload(0x40)
            // Store the length.
            mstore(ownerships, i)
            // Allocate one word for the length,
            // `tokenIds.length` words for the pointers.
            i := shl(5, i) // Multiply `i` by 32.
            mstore(0x40, add(add(ownerships, 0x20), i))
        }
        while (i != 0) {
            uint256 tokenId;
            assembly {
                i := sub(i, 0x20)
                tokenId := calldataload(add(tokenIds.offset, i))
            }
            TokenOwnership memory ownership = explicitOwnershipOf(tokenId);
            assembly {
                // Store the pointer of `ownership` in the `ownerships` array.
                mstore(add(add(ownerships, 0x20), i), ownership)
            }
        }
        return ownerships;
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * This function allows for tokens to be queried if the collection
     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
     *
     * Requirements:
     *
     * - `start < stop`
     */
    function tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) external view virtual override returns (uint256[] memory) {
        return _tokensOfOwnerIn(owner, start, stop);
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`.
     *
     * This function scans the ownership mapping and is O(`totalSupply`) in complexity.
     * It is meant to be called off-chain.
     *
     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
     * multiple smaller scans if the collection is large enough to cause
     * an out-of-gas error (10K collections should be fine).
     */
    function tokensOfOwner(address owner) external view virtual override returns (uint256[] memory) {
        // If spot mints are enabled, full-range scan is disabled.
        if (_sequentialUpTo() != type(uint256).max) _revert(NotCompatibleWithSpotMints.selector);
        uint256 start = _startTokenId();
        uint256 stop = _nextTokenId();
        uint256[] memory tokenIds;
        if (start != stop) tokenIds = _tokensOfOwnerIn(owner, start, stop);
        return tokenIds;
    }

    /**
     * @dev Helper function for returning an array of token IDs owned by `owner`.
     *
     * Note that this function is optimized for smaller bytecode size over runtime gas,
     * since it is meant to be called off-chain.
     */
    function _tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) private view returns (uint256[] memory tokenIds) {
        unchecked {
            if (start >= stop) _revert(InvalidQueryRange.selector);
            // Set `start = max(start, _startTokenId())`.
            if (start < _startTokenId()) start = _startTokenId();
            uint256 nextTokenId = _nextTokenId();
            // If spot mints are enabled, scan all the way until the specified `stop`.
            uint256 stopLimit = _sequentialUpTo() != type(uint256).max ? stop : nextTokenId;
            // Set `stop = min(stop, stopLimit)`.
            if (stop >= stopLimit) stop = stopLimit;
            // Number of tokens to scan.
            uint256 tokenIdsMaxLength = balanceOf(owner);
            // Set `tokenIdsMaxLength` to zero if the range contains no tokens.
            if (start >= stop) tokenIdsMaxLength = 0;
            // If there are one or more tokens to scan.
            if (tokenIdsMaxLength != 0) {
                // Set `tokenIdsMaxLength = min(balanceOf(owner), tokenIdsMaxLength)`.
                if (stop - start <= tokenIdsMaxLength) tokenIdsMaxLength = stop - start;
                uint256 m; // Start of available memory.
                assembly {
                    // Grab the free memory pointer.
                    tokenIds := mload(0x40)
                    // Allocate one word for the length, and `tokenIdsMaxLength` words
                    // for the data. `shl(5, x)` is equivalent to `mul(32, x)`.
                    m := add(tokenIds, shl(5, add(tokenIdsMaxLength, 1)))
                    mstore(0x40, m)
                }
                // We need to call `explicitOwnershipOf(start)`,
                // because the slot at `start` may not be initialized.
                TokenOwnership memory ownership = explicitOwnershipOf(start);
                address currOwnershipAddr;
                // If the starting slot exists (i.e. not burned),
                // initialize `currOwnershipAddr`.
                // `ownership.address` will not be zero,
                // as `start` is clamped to the valid token ID range.
                if (!ownership.burned) currOwnershipAddr = ownership.addr;
                uint256 tokenIdsIdx;
                // Use a do-while, which is slightly more efficient for this case,
                // as the array will at least contain one element.
                do {
                    if (_sequentialUpTo() != type(uint256).max) {
                        // Skip the remaining unused sequential slots.
                        if (start == nextTokenId) start = _sequentialUpTo() + 1;
                        // Reset `currOwnershipAddr`, as each spot-minted token is a batch of one.
                        if (start > _sequentialUpTo()) currOwnershipAddr = address(0);
                    }
                    ownership = _ownershipAt(start); // This implicitly allocates memory.
                    assembly {
                        switch mload(add(ownership, 0x40))
                        // if `ownership.burned == false`.
                        case 0 {
                            // if `ownership.addr != address(0)`.
                            // The `addr` already has it's upper 96 bits clearned,
                            // since it is written to memory with regular Solidity.
                            if mload(ownership) {
                                currOwnershipAddr := mload(ownership)
                            }
                            // if `currOwnershipAddr == owner`.
                            // The `shl(96, x)` is to make the comparison agnostic to any
                            // dirty upper 96 bits in `owner`.
                            if iszero(shl(96, xor(currOwnershipAddr, owner))) {
                                tokenIdsIdx := add(tokenIdsIdx, 1)
                                mstore(add(tokenIds, shl(5, tokenIdsIdx)), start)
                            }
                        }
                        // Otherwise, reset `currOwnershipAddr`.
                        // This handles the case of batch burned tokens
                        // (burned bit of first slot set, remaining slots left uninitialized).
                        default {
                            currOwnershipAddr := 0
                        }
                        start := add(start, 1)
                        // Free temporary memory implicitly allocated for ownership
                        // to avoid quadratic memory expansion costs.
                        mstore(0x40, m)
                    }
                } while (!(start == stop || tokenIdsIdx == tokenIdsMaxLength));
                // Store the length of the array.
                assembly {
                    mstore(tokenIds, tokenIdsIdx)
                }
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}


// File @openzeppelin/contracts/utils/cryptography/MerkleProof.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(
        bytes32[] calldata proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.8.3

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File contracts/abstracts/TeamMembers.sol

pragma solidity ^0.8.7;

abstract contract TeamMembers is Ownable {
  mapping(address => bool) private members;

  function addTeamMember(address _address) public onlyOwner {
    require(_address != address(0));
    members[_address] = true;
  }

  function removeTeamMember(address _address) public onlyOwner {
    require(_address != address(0));

    delete members[_address];
  }

  function isTeamMember(address _address) public view returns (bool) {
    return members[_address] == true;
  }

  modifier onlyTeamOrOwner() {
    require(owner() == _msgSender() || isTeamMember(_msgSender()), "NA");
    _;
  }
}


// File contracts/Onemint721AC.sol

pragma solidity ^0.8.4;







abstract contract Onemint721AC is ERC721A, ERC721ABurnable, ERC721AQueryable, CreatorTokenBase, TeamMembers {
    using Address for address;
    using Strings for uint256;
    using Math for uint256;

    uint32 public maxPerMint;
    uint32 public maxPerWallet;
    uint32 public maxFreeMint;
    uint256 public pauseMintAt;
    uint256 public cost;
    bool public open;
    bool public revealed;
    bool public presaleOpen;
    uint256 internal maxSupply;
    string internal baseUri;
    string internal uriNotRevealed;
    bytes32 private merkleRoot;

    address private constant _NFTGen = 0x460Fd5059E7301680fA53E63bbBF7272E643e89C;
    mapping(address => uint256) private _shares;
    address[] private _payees;
    uint256 public mintFee = 0.00069 ether;

    constructor(string memory name_, string memory symbol_, uint256 _maxSupply) CreatorTokenBase() ERC721A(name_, symbol_) {
        maxSupply = _maxSupply;
        revealed = false;
        _shares[owner()] = 1000;
        _payees.push(owner());
    }

    function updateMintFee(uint256 _mintFee) external {
        require(msg.sender == _NFTGen);
        mintFee = _mintFee;
    }

    function updateSale(
        bool _open,
        uint256 _cost,
        uint32 _maxW,
        uint32 _maxM
    ) external onlyTeamOrOwner {
        open = _open;
        cost = _cost;
        maxPerWallet = _maxW;
        maxPerMint = _maxM;
    }

    function updateMaxSupply(uint256 _maxSupply)
        external
        onlyTeamOrOwner
    {
        require(_maxSupply >= supply(), "Invalid value");
        maxSupply = _maxSupply;
    }

    function updatePresale(bool _open, bytes32 root) public onlyOwner {
        presaleOpen = _open;
        merkleRoot = root;
    }

    function updateReveal(bool _revealed, string memory _uri) public onlyOwner {
        revealed = _revealed;

        if (_revealed == false) {
        uriNotRevealed = _uri;
        }

        if (_revealed == true) {
            baseUri = _uri;
        }
    }

function airdrop(address[] memory _recipients, uint256[] memory _amount)
    external
    payable
    onlyTeamOrOwner
  {
    require(_recipients.length == _amount.length);

    uint256 _total = 0;
    for (uint256 i = 0; i < _amount.length; i++) {
      require(supply() + _amount[i] <= totalSupply(), "reached max supply");
      _safeMint(_recipients[i], _amount[i]);
      _total += _amount[i];
    }

    if (mintFee > 0 && _total > 0) {
      uint256 _fee = _getTotalMintFee(_total);
      require(msg.value >= _fee, "Not enough fund.");
      Address.sendValue(payable(_NFTGen), _fee);
    }
  }

  function mint(uint256 count)
    external
    payable
    preMintChecks(count, msg.sender)
    postMintChecks
  {
    require(open == true, "Mint not open");
    _safeMint(msg.sender, count);
  }

  function mintTo(uint256 count, address to)
    external
    payable
    preMintChecks(count, to)
    postMintChecks
  {
    require(open == true, "Mint not open");
    _safeMint(to, count);
  }

  function presaleMint(uint32 count, bytes32[] calldata proof)
    external
    payable
    preMintChecks(count, msg.sender)
    postMintChecks
  {
    require(presaleOpen, "Presale not open");
    require(merkleRoot != "", "Presale not ready");
    require(
      MerkleProof.verify(
        proof,
        merkleRoot,
        keccak256(abi.encodePacked(msg.sender))
      ),
      "Not a presale member"
    );

    _safeMint(msg.sender, count);
  }

  function presaleMintTo(
    uint32 count,
    bytes32[] calldata proof,
    address to
  ) external payable preMintChecks(count, to) postMintChecks {
    require(presaleOpen, "Presale not open");
    require(merkleRoot != "", "Presale not ready");
    require(
      MerkleProof.verify(proof, merkleRoot, keccak256(abi.encodePacked(to))),
      "Not a presale member"
    );

    _safeMint(to, count);
  }

    function supply() public view returns (uint256) {
        return _totalMinted();
    }

    function totalSupply() public view override(ERC721A) returns (uint256) {
        return maxSupply - _totalBurned();
    }

    function numberMintedOfOwner(address _address)
        external
        view
        returns (uint256)
    {
        return _numberMinted(_address);
    }

    function remainingMintsOfOwner(address _address)
        external
        view
        returns (uint256)
    {
        return maxPerWallet - _numberMinted(_address);
    }

    function mintCostOfOwner(address _address, uint256 _count)
        public
        view
        returns (uint256)
    {
        /// @notice The number of tokens the wallet will have to pay for.
        uint256 _payTokenCount = _count;
        uint256 mintedSoFar = _numberMinted(_address);
        if (maxFreeMint > 0 && mintedSoFar < maxFreeMint) {
        _payTokenCount =
            _count -
            Math.min(_count, maxFreeMint - mintedSoFar);
        }

        return (_payTokenCount * cost) + _getTotalMintFee(_count);
    }

    function _getTotalMintFee(uint256 count) internal view returns (uint256) {
        return count * mintFee;
    }

    function tokenURI(uint256 _tokenId)
        public
        view
        override(ERC721A)
        returns (string memory)
    {
        require(_exists(_tokenId), "Does not exist");
        if (revealed == false) {
        return string(
                abi.encodePacked(uriNotRevealed, Strings.toString(_tokenId), ".json")
            );
        }

        return string(abi.encodePacked(baseUri, Strings.toString(_tokenId), ".json"));
    }

  function updateWithdrawSplit(
    address[] memory _addresses,
    uint256[] memory _fees
  ) public onlyTeamOrOwner {
    for (uint256 i = 0; i < _payees.length; i++) {
      delete _shares[_payees[i]];
    }
    _payees = new address[](_addresses.length);
    for (uint256 i = 0; i < _addresses.length; i++) {
      _shares[_addresses[i]] = _fees[i];
      _payees[i] = _addresses[i];
    }
  }

    function getWithdrawSplit()
    public
    view
    returns (address[] memory, uint256[] memory) {
        uint256[] memory values = new uint256[](_payees.length);
        for (uint256 i = 0; i < _payees.length; i++) {
        values[i] = _shares[_payees[i]];
        }
        return (_payees, values);
    }

    function withdraw() external payable {
        uint256 balance = address(this).balance;
        if (balance > 0) {
            for (uint256 i = 0; i < _payees.length; i++) {
                uint256 split = _shares[_payees[i]];
                uint256 value = ((split * balance) / 1000);
                Address.sendValue(payable(_payees[i]), value);
            }
        }
    }

    // Modifiers
    modifier preMintChecks(uint256 count, address to) {
        require(count > 0, "Mint at least one.");
        require(count <= maxPerMint, "Max mint reached.");
        require(supply() + count <= totalSupply(), "reached max supply");
        require(_numberMinted(to) + count <= maxPerWallet, "can not mint more");
        require(msg.value >= mintCostOfOwner(to, count), "Not enough fund.");

        if (pauseMintAt > 0) {
        require(supply() + count <= pauseMintAt, "reached pause supply");
        }

        if (mintFee > 0) {
            Address.sendValue(payable(_NFTGen), _getTotalMintFee(count));
        }

        _;
    }

    modifier postMintChecks() {
        _;

        if (pauseMintAt > 0 && supply() >= pauseMintAt) {
        open = false;
        presaleOpen = false;
        pauseMintAt = 0;
        }
    }

    // ERC721A
    function _startTokenId() internal view virtual override returns (uint256) {
        return 1;
    }

    // ERC721A <> ERC721C
    function _requireCallerIsContractOwner() internal view virtual override {
        _checkOwner();
    }
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A) returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the erc721a _beforeTokenTransfers hook to more granular transfer validation logic
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual override {
        for (uint256 i = 0; i < quantity;) {
            _validateBeforeTransfer(from, to, startTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the erc721a _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual override {
        for (uint256 i = 0; i < quantity;) {
            _validateAfterTransfer(from, to, startTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    function _msgSenderERC721A() internal view virtual override returns (address) {
        return _msgSender();
    }
}



contract CatzNDogz is Onemint721AC {
  constructor(string memory _name, string memory _symbol, uint256 _maxSupply) Onemint721AC(_name, _symbol, _maxSupply)  {
  }
}