// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
/*
This is a Stacker.vc FarmToken version 1 contract. It deploys a rebase token where it rebases to be equivalent to it's underlying token. 1 stackUSDT = 1 USDT.
The underlying assets are used to farm on different smart contract and produce yield via the ever-expanding DeFi ecosystem.

NOTE: 
This is an abstract contract, and two functions need to be implemented for a valid deployment: 
_verify(address _account, uint256 _amountUnderlyingToSend) --> in order to pass any locks on sending funds/withdrawing
_getTotalUnderlying() --> to know the total amount of funds under management

THANKS! 
To Lido DAO for the inspiration in more ways than one, but especially for a lot of the code here. 
If you haven't already, stake your ETH for ETH2.0 with Lido.fi!
Also thanks for Aragon for hosting our Stacker Ventures DAO, and for more inspiration!
*/

pragma solidity ^0.6.11;

import "../openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../openzeppelin/contracts/token/ERC20/SafeERC20.sol"; // call ERC20 safely
import "../openzeppelin/contracts/math/SafeMath.sol";
import "../openzeppelin/contracts/utils/Address.sol";

abstract contract FarmTokenV1 is IERC20 {
	using SafeMath for uint256;
	using Address for address;

	// shares are how a users balance is generated. For rebase tokens, balances are always generated at runtime, while shares stay constant.
	// shares is your proportion of the total pool of invested UnderlyingToken
	// shares are like a Compound.finance cToken, while our token balances are like an Aave aToken.
	mapping(address => uint256) private shares;
	mapping(address => mapping (address => uint256)) private allowances;

	uint256 public totalShares;

	string public name;
	string public symbol;
	string public underlying;
	address public underlyingContract;

	uint8 public decimals;

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);

    constructor(string memory _name, uint8 _decimals, address _underlyingContract) public {
    	name = string(abi.encodePacked(abi.encodePacked("Stacker Ventures ", _name), " v1"));
    	symbol = string(abi.encodePacked("stack", _name));
    	underlying = _name;

    	decimals = _decimals;

    	underlyingContract = _underlyingContract;
    }

    // 1 stackToken = 1 underlying token
    function totalSupply() external override view returns (uint256){
    	return _getTotalUnderlying();
    }

    function totalUnderlying() external view returns (uint256){
    	return _getTotalUnderlying();
    }

    function balanceOf(address _account) public override view returns (uint256){
    	return getUnderlyingForShares(_sharesOf(_account));
    }

    // transfer tokens, not shares
    function transfer(address _recipient, uint256 _amount) external override returns (bool){
    	_verify(msg.sender, _amount);
    	_transfer(msg.sender, _recipient, _amount);
        return true;
    }

    function transferFrom(address _sender, address _recipient, uint256 _amount) external override returns (bool){
    	_verify(_sender, _amount);
    	uint256 _currentAllowance = allowances[_sender][msg.sender];
        require(_currentAllowance >= _amount, "FARMTOKENV1: not enough allowance");

        _transfer(_sender, _recipient, _amount);
        _approve(_sender, msg.sender, _currentAllowance.sub(_amount));
        return true;
    }

    // this checks if a transfer/transferFrom/withdraw is allowed. There are some conditions on withdraws/transfers from new deposits
    // function stub, this needs to be implemented in a contract which inherits this for a valid deployment
    // IMPLEMENT THIS
    function _verify(address _account, uint256 _amountUnderlyingToSend) internal virtual;

    // allow tokens, not shares
    function allowance(address _owner, address _spender) external override view returns (uint256){
    	return allowances[_owner][_spender];
    }

    // approve tokens, not shares
    function approve(address _spender, uint256 _amount) external override returns (bool){
    	_approve(msg.sender, _spender, _amount);
        return true;
    }

    // shares of _account
    function sharesOf(address _account) external view returns (uint256) {
    	return _sharesOf(_account);
    }

    // how many shares for _amount of underlying?
    // if there are no shares, or no underlying yet, we are initing the contract or suffered a total loss
    // either way, init this state at 1:1 shares:underlying
    function getSharesForUnderlying(uint256 _amountUnderlying) public view returns (uint256){
    	uint256 _totalUnderlying = _getTotalUnderlying();
    	if (_totalUnderlying == 0){
    		return _amountUnderlying; // this will init at 1:1 _underlying:_shares
    	}
    	uint256 _totalShares = totalShares;
    	if (_totalShares == 0){
    		return _amountUnderlying; // this will init the first shares, expected contract underlying balance == 0, or there will be a bonus (doesn't belong to anyone so ok)
    	}

    	return _amountUnderlying.mul(_totalShares).div(_totalUnderlying);
    }

    // how many underlying for _amount of shares?
    // if there are no shares, or no underlying yet, we are initing the contract or suffered a total loss
    // either way, init this state at 1:1 shares:underlying
    function getUnderlyingForShares(uint256 _amountShares) public view returns (uint256){
    	uint256 _totalShares = totalShares;
    	if (_totalShares == 0){
    		return _amountShares; // this will init at 1:1 _shares:_underlying
    	}
    	uint256 _totalUnderlying = _getTotalUnderlying();
    	if (_totalUnderlying == 0){
    		return _amountShares; // this will init at 1:1 
    	}

    	return _amountShares.mul(_totalUnderlying).div(_totalShares);

    }

    function _sharesOf(address _account) internal view returns (uint256){
    	return shares[_account];
    }

    // function stub, this needs to be implemented in a contract which inherits this for a valid deployment
    // sum the contract balance + working balance withdrawn from the contract and actively farming
    // IMPLEMENT THIS
    function _getTotalUnderlying() internal virtual view returns (uint256);

    // in underlying
    function _transfer(address _sender, address _recipient, uint256 _amount) internal {
    	uint256 _sharesToTransfer = getSharesForUnderlying(_amount);
    	_transferShares(_sender, _recipient, _sharesToTransfer);
    	emit Transfer(_sender, _recipient, _amount);
    }

    // in underlying
    function _approve(address _owner, address _spender, uint256 _amount) internal {
    	require(_owner != address(0), "FARMTOKENV1: from == 0x0");
        require(_spender != address(0), "FARMTOKENV1: to == 0x00");

        allowances[_owner][_spender] = _amount;
        emit Approval(_owner, _spender, _amount);
    }

    function _transferShares(address _sender, address _recipient,  uint256 _amountShares) internal {
    	require(_sender != address(0), "FARMTOKENV1: from == 0x00");
        require(_recipient != address(0), "FARMTOKENV1: to == 0x00");

        uint256 _currentSenderShares = shares[_sender];
        require(_amountShares <= _currentSenderShares, "FARMTOKENV1: transfer amount exceeds balance");

        shares[_sender] = _currentSenderShares.sub(_amountShares);
        shares[_recipient] = shares[_recipient].add(_amountShares);
    }

    function _mintShares(address _recipient, uint256 _amountShares) internal {
    	require(_recipient != address(0), "FARMTOKENV1: to == 0x00");

        totalShares = totalShares.add(_amountShares);
        shares[_recipient] = shares[_recipient].add(_amountShares);

        // NOTE: we're not emitting a Transfer event from the zero address here
        // If we mint shares with no underlying, we basically just diluted everyone

        // It's not possible to send events from _everyone_ to reflect each balance dilution (ie: balance going down)

        // Not compliant to ERC20 standard...
    }

    function _burnShares(address _account, uint256 _amountShares) internal {
    	require(_account != address(0), "FARMTOKENV1: burn from == 0x00");

        uint256 _accountShares = shares[_account];
        require(_amountShares <= _accountShares, "FARMTOKENV1: burn amount exceeds balance");
        totalShares = totalShares.sub(_amountShares);

        shares[_account] = _accountShares.sub(_amountShares);

        // NOTE: we're not emitting a Transfer event to the zero address here 
        // If we burn shares without burning/withdrawing the underlying
        // then it looks like a system wide credit to everyones balance

        // It's not possible to send events to _everyone_ to reflect each balance credit (ie: balance going up)

        // Not compliant to ERC20 standard...
    }
}

// SPDX-License-Identifier: MIT
/*
This is a Stacker.vc FarmTreasury version 1 contract. It deploys a rebase token where it rebases to be equivalent to it's underlying token. 1 stackUSDT = 1 USDT.
The underlying assets are used to farm on different smart contract and produce yield via the ever-expanding DeFi ecosystem.

THANKS! To Lido DAO for the inspiration in more ways than one, but especially for a lot of the code here. 
If you haven't already, stake your ETH for ETH2.0 with Lido.fi!

Also thanks for Aragon for hosting our Stacker Ventures DAO, and for more inspiration!
*/

pragma solidity ^0.6.11;

import "../openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../openzeppelin/contracts/token/ERC20/SafeERC20.sol"; // call ERC20 safely
import "../openzeppelin/contracts/math/SafeMath.sol";
import "../openzeppelin/contracts/utils/Address.sol";

import "../openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "./FarmTokenV1.sol";

contract FarmTreasuryV1 is ReentrancyGuard, FarmTokenV1 {
	using SafeERC20 for IERC20;
	using SafeMath for uint256;
	using Address for address;

	mapping(address => DepositInfo) public userDeposits;
	mapping(address => bool) public noLockWhitelist;

	struct DepositInfo {
		uint256 amountUnderlyingLocked;
		uint256 timestampDeposit;
		uint256 timestampUnlocked;
	}

	uint256 internal constant LOOP_LIMIT = 200;

	address payable public governance;
	address payable public farmBoss;

	bool public paused = false;
	bool public pausedDeposits = false;

	// fee schedule, can be changed by governance, in bips
	// performance fee is on any gains, base fee is on AUM/yearly
	uint256 public constant max = 10000;
	uint256 public performanceToTreasury = 1000;
	uint256 public performanceToFarmer = 1000;
	uint256 public baseToTreasury = 100;
	uint256 public baseToFarmer = 100;

	// limits on rebalancing from the farmer, trying to negate errant rebalances
	uint256 public rebalanceUpLimit = 100; // maximum of a 1% gain per rebalance
	uint256 public rebalanceUpWaitTime = 23 hours;
	uint256 public lastRebalanceUpTime;

	// waiting period on withdraws from time of deposit
	// locked amount linearly decreases until the time is up, so at waitPeriod/2 after deposit, you can withdraw depositAmt/2 funds.
	uint256 public waitPeriod = 1 weeks;

	// hot wallet holdings for instant withdraw, in bips
	// if the hot wallet balance expires, the users will need to wait for the next rebalance period in order to withdraw
	uint256 public hotWalletHoldings = 1000; // 10% initially

	uint256 public ACTIVELY_FARMED;

	event RebalanceHot(uint256 amountIn, uint256 amountToFarmer, uint256 timestamp);
	event ProfitDeclared(bool profit, uint256 amount, uint256 timestamp, uint256 totalAmountInPool, uint256 totalSharesInPool, uint256 performanceFeeTotal, uint256 baseFeeTotal);
	event Deposit(address depositor, uint256 amount, address referral);
	event Withdraw(address withdrawer, uint256 amount);

	constructor(string memory _nameUnderlying, uint8 _decimalsUnderlying, address _underlying) public FarmTokenV1(_nameUnderlying, _decimalsUnderlying, _underlying) {
		governance = msg.sender;
		lastRebalanceUpTime = block.timestamp;
	}

	function setGovernance(address payable _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		governance = _new;
	}

	// the "farmBoss" is a trusted smart contract that functions kind of like an EOA.
	// HOWEVER specific contract addresses need to be whitelisted in order for this contract to be allowed to interact w/ them
	// the governance has full control over the farmBoss, and other addresses can have partial control for strategy rotation/rebalancing
	function setFarmBoss(address payable _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		farmBoss = _new;
	}

	function setNoLockWhitelist(address[] calldata _accounts, bool[] calldata _noLock) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_accounts.length == _noLock.length && _accounts.length <= LOOP_LIMIT, "FARMTREASURYV1: check array lengths");

		for (uint256 i = 0; i < _accounts.length; i++){
			noLockWhitelist[_accounts[i]] = _noLock[i];
		}
	}

	function pause() external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		paused = true;
	}

	function unpause() external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		paused = false;
	}

	function pauseDeposits() external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		pausedDeposits = true;
	}

	function unpauseDeposits() external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		pausedDeposits = false;
	}

	function setFeeDistribution(uint256 _performanceToTreasury, uint256 _performanceToFarmer, uint256 _baseToTreasury, uint256 _baseToFarmer) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_performanceToTreasury.add(_performanceToFarmer) < max, "FARMTREASURYV1: too high performance");
		require(_baseToTreasury.add(_baseToFarmer) <= 500, "FARMTREASURYV1: too high base");
		
		performanceToTreasury = _performanceToTreasury;
		performanceToFarmer = _performanceToFarmer;
		baseToTreasury = _baseToTreasury;
		baseToFarmer = _baseToFarmer;
	}

	function setWaitPeriod(uint256 _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_new <= 10 weeks, "FARMTREASURYV1: too long wait");

		waitPeriod = _new;
	}

	function setHotWalletHoldings(uint256 _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_new <= max && _new >= 100, "FARMTREASURYV1: hot wallet values bad");

		hotWalletHoldings = _new;
	}

	function setRebalanceUpLimit(uint256 _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_new < max, "FARMTREASURYV1: >= max");

		rebalanceUpLimit = _new;
	}

	function setRebalanceUpWaitTime(uint256 _new) external {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		require(_new <= 1 weeks, "FARMTREASURYV1: > 1 week");

		rebalanceUpWaitTime = _new;
	}

	function deposit(uint256 _amountUnderlying, address _referral) external nonReentrant {
		require(_amountUnderlying > 0, "FARMTREASURYV1: amount == 0");
		require(!paused && !pausedDeposits, "FARMTREASURYV1: paused");

		_deposit(_amountUnderlying, _referral);

		IERC20 _underlying = IERC20(underlyingContract);
		uint256 _before = _underlying.balanceOf(address(this));
		_underlying.safeTransferFrom(msg.sender, address(this), _amountUnderlying);
		uint256 _after = _underlying.balanceOf(address(this));
		uint256 _total = _after.sub(_before);
		require(_total >= _amountUnderlying, "FARMTREASURYV1: bad transfer");
	}

	function _deposit(uint256 _amountUnderlying, address _referral) internal {
		// determine how many shares this will be
		uint256 _sharesToMint = getSharesForUnderlying(_amountUnderlying);

		_mintShares(msg.sender, _sharesToMint);
		// store some important info for this deposit, that will be checked on withdraw/transfer of tokens
		_storeDepositInfo(msg.sender, _amountUnderlying);

		// emit deposit w/ referral event... can't refer yourself
		if (_referral != msg.sender){
			emit Deposit(msg.sender, _amountUnderlying, _referral);
		}
		else {
			emit Deposit(msg.sender, _amountUnderlying, address(0));
		}

		emit Transfer(address(0), msg.sender, _amountUnderlying);
	}

	function _storeDepositInfo(address _account, uint256 _amountUnderlying) internal {

		DepositInfo memory _existingInfo = userDeposits[_account];

		// first deposit, make a new entry in the mapping, lock all funds for "waitPeriod"
		if (_existingInfo.timestampDeposit == 0){
			DepositInfo memory _info = DepositInfo(
				{
					amountUnderlyingLocked: _amountUnderlying, 
					timestampDeposit: block.timestamp, 
					timestampUnlocked: block.timestamp.add(waitPeriod)
				}
			);
			userDeposits[_account] = _info;
		}
		// not the first deposit, if there are still funds locked, then average out the waits (ie: 1 BTC locked 10 days = 2 BTC locked 5 days)
		else {
			uint256 _lockedAmt = _getLockedAmount(_account, _existingInfo.amountUnderlyingLocked, _existingInfo.timestampDeposit, _existingInfo.timestampUnlocked);
			// if there's no lock, disregard old info and make a new lock

			if (_lockedAmt == 0){
				DepositInfo memory _info = DepositInfo(
					{
						amountUnderlyingLocked: _amountUnderlying, 
						timestampDeposit: block.timestamp, 
						timestampUnlocked: block.timestamp.add(waitPeriod)
					}
				);
				userDeposits[_account] = _info;
			}
			// funds are still locked from a past deposit, average out the waittime remaining with the waittime for this new deposit
			/*
				solve this equation:

				newDepositAmt * waitPeriod + remainingAmt * existingWaitPeriod = (newDepositAmt + remainingAmt) * X waitPeriod

				therefore:

								(newDepositAmt * waitPeriod + remainingAmt * existingWaitPeriod)
				X waitPeriod =  ----------------------------------------------------------------
												(newDepositAmt + remainingAmt)

				Example: 7 BTC new deposit, with wait period of 2 weeks
						 1 BTC remaining, with remaining wait period of 1 week
						 ...
						 (7 BTC * 2 weeks + 1 BTC * 1 week) / 8 BTC = 1.875 weeks
			*/
			else {
				uint256 _lockedAmtTime = _lockedAmt.mul(_existingInfo.timestampUnlocked.sub(block.timestamp));
				uint256 _newAmtTime = _amountUnderlying.mul(waitPeriod);
				uint256 _total = _amountUnderlying.add(_lockedAmt);

				uint256 _newLockedTime = (_lockedAmtTime.add(_newAmtTime)).div(_total);

				DepositInfo memory _info = DepositInfo(
					{
						amountUnderlyingLocked: _total, 
						timestampDeposit: block.timestamp, 
						timestampUnlocked: block.timestamp.add(_newLockedTime)
					}
				);
				userDeposits[_account] = _info;
			}
		}
	}

	function getLockedAmount(address _account) public view returns (uint256) {
		DepositInfo memory _existingInfo = userDeposits[_account];
		return _getLockedAmount(_account, _existingInfo.amountUnderlyingLocked, _existingInfo.timestampDeposit, _existingInfo.timestampUnlocked);
	}

	// the locked amount linearly decreases until the timestampUnlocked time, then it's zero
	// Example: if 5 BTC contributed (2 week lock), then after 1 week there will be 2.5 BTC locked, the rest is free to transfer/withdraw
	function _getLockedAmount(address _account, uint256 _amountLocked, uint256 _timestampDeposit, uint256 _timestampUnlocked) internal view returns (uint256) {
		if (_timestampUnlocked <= block.timestamp || noLockWhitelist[_account]){
			return 0;
		}
		else {
			uint256 _remainingTime = _timestampUnlocked.sub(block.timestamp);
			uint256 _totalTime = _timestampUnlocked.sub(_timestampDeposit);

			return _amountLocked.mul(_remainingTime).div(_totalTime);
		}
	}

	function withdraw(uint256 _amountUnderlying) external nonReentrant {
		require(_amountUnderlying > 0, "FARMTREASURYV1: amount == 0");
		require(!paused, "FARMTREASURYV1: paused");

		_withdraw(_amountUnderlying);

		IERC20(underlyingContract).safeTransfer(msg.sender, _amountUnderlying);
	}

	function _withdraw(uint256 _amountUnderlying) internal {
		_verify(msg.sender, _amountUnderlying);
		// try and catch the more obvious error of hot wallet being depleted, otherwise proceed
		if (IERC20(underlyingContract).balanceOf(address(this)) < _amountUnderlying){
			revert("FARMTREASURYV1: Hot wallet balance depleted. Please try smaller withdraw or wait for rebalancing.");
		}

		uint256 _sharesToBurn = getSharesForUnderlying(_amountUnderlying);
		_burnShares(msg.sender, _sharesToBurn); // they must have >= _sharesToBurn, checked here

		emit Transfer(msg.sender, address(0), _amountUnderlying);
		emit Withdraw(msg.sender, _amountUnderlying);
	}

	// wait time verification
	function _verify(address _account, uint256 _amountUnderlyingToSend) internal override {
		DepositInfo memory _existingInfo = userDeposits[_account];

		uint256 _lockedAmt = _getLockedAmount(_account, _existingInfo.amountUnderlyingLocked, _existingInfo.timestampDeposit, _existingInfo.timestampUnlocked);
		uint256 _balance = balanceOf(_account);

		// require that any funds locked are not leaving the account in question.
		require(_balance.sub(_amountUnderlyingToSend) >= _lockedAmt, "FARMTREASURYV1: requested funds are temporarily locked");
	}

	// this means that we made a GAIN, due to standard farming gains
	// operaratable by farmBoss, this is standard operating procedure, farmers can only report gains
	function rebalanceUp(uint256 _amount, address _farmerRewards) external nonReentrant returns (bool, uint256) {
		require(msg.sender == farmBoss, "FARMTREASURYV1: !farmBoss");
		require(!paused, "FARMTREASURYV1: paused");

		// fee logic & profit recording
		// check farmer limits on rebalance wait time for earning reportings. if there is no _amount reported, we don't take any fees and skip these checks
		// we should always allow pure hot wallet rebalances, however earnings needs some checks and restrictions
		if (_amount > 0){
			require(block.timestamp.sub(lastRebalanceUpTime) >= rebalanceUpWaitTime, "FARMTREASURYV1: <rebalanceUpWaitTime");
			require(ACTIVELY_FARMED.mul(rebalanceUpLimit).div(max) >= _amount, "FARMTREASURYV1 _amount > rebalanceUpLimit");
			// farmer incurred a gain of _amount, add this to the amount being farmed
			ACTIVELY_FARMED = ACTIVELY_FARMED.add(_amount);
			uint256 _totalPerformance = _performanceFee(_amount, _farmerRewards);
			uint256 _totalAnnual = _annualFee(_farmerRewards);

			// for farmer controls, and also for the annual fee time
			// only update this if there is a reported gain, otherwise this is just a hot wallet rebalance, and we should always allow these
			lastRebalanceUpTime = block.timestamp; 

			// for off-chain APY calculations, fees assessed
			emit ProfitDeclared(true, _amount, block.timestamp, _getTotalUnderlying(), totalShares, _totalPerformance, _totalAnnual);
		}
		else {
			// for off-chain APY calculations, no fees assessed
			emit ProfitDeclared(true, _amount, block.timestamp, _getTotalUnderlying(), totalShares, 0, 0);
		}
		// end fee logic & profit recording

		// funds are in the contract and gains are accounted for, now determine if we need to further rebalance the hot wallet up, or can take funds in order to farm
		// start hot wallet and farmBoss rebalance logic
		(bool _fundsNeeded, uint256 _amountChange) = _calcHotWallet();
		_rebalanceHot(_fundsNeeded, _amountChange); // if the hot wallet rebalance fails, revert() the entire function
		// end logic

		return (_fundsNeeded, _amountChange); // in case we need them, FE simulations and such
	}

	// this means that the system took a loss, and it needs to be reflected in the next rebalance
	// only operatable by governance, (large) losses should be extremely rare by good farming practices
	// this would look like a farmed smart contract getting exploited/hacked, and us not having the necessary insurance for it
	// possible that some more aggressive IL strategies could also need this function called
	function rebalanceDown(uint256 _amount, bool _rebalanceHotWallet) external nonReentrant returns (bool, uint256) {
		require(msg.sender == governance, "FARMTREASURYV1: !governance");
		// require(!paused, "FARMTREASURYV1: paused"); <-- governance can only call this anyways, leave this commented out

		ACTIVELY_FARMED = ACTIVELY_FARMED.sub(_amount);

		if (_rebalanceHotWallet){
			(bool _fundsNeeded, uint256 _amountChange) = _calcHotWallet();
			_rebalanceHot(_fundsNeeded, _amountChange); // if the hot wallet rebalance fails, revert() the entire function

			return (_fundsNeeded, _amountChange); // in case we need them, FE simulations and such
		}

		// for off-chain APY calculations, no fees assessed
		emit ProfitDeclared(false, _amount, block.timestamp, _getTotalUnderlying(), totalShares, 0, 0);

		return (false, 0);
	}

	function _performanceFee(uint256 _amount, address _farmerRewards) internal returns (uint256){

		uint256 _existingShares = totalShares;
		uint256 _balance = _getTotalUnderlying();

		uint256 _performanceToFarmerUnderlying = _amount.mul(performanceToFarmer).div(max);
		uint256 _performanceToTreasuryUnderlying = _amount.mul(performanceToTreasury).div(max);
		uint256 _performanceTotalUnderlying = _performanceToFarmerUnderlying.add(_performanceToTreasuryUnderlying);

		if (_performanceTotalUnderlying == 0){
			return 0;
		}

		uint256 _sharesToMint = _underlyingFeeToShares(_performanceTotalUnderlying, _balance, _existingShares);

		uint256 _sharesToFarmer = _sharesToMint.mul(_performanceToFarmerUnderlying).div(_performanceTotalUnderlying); // by the same ratio
		uint256 _sharesToTreasury = _sharesToMint.sub(_sharesToFarmer);

		_mintShares(_farmerRewards, _sharesToFarmer);
		_mintShares(governance, _sharesToTreasury);

		uint256 _underlyingFarmer = getUnderlyingForShares(_sharesToFarmer);
		uint256 _underlyingTreasury = getUnderlyingForShares(_sharesToTreasury);

		// do two mint events, in underlying, not shares
		emit Transfer(address(0), _farmerRewards, _underlyingFarmer);
		emit Transfer(address(0), governance, _underlyingTreasury);

		return _underlyingFarmer.add(_underlyingTreasury);
	}

	// we are taking baseToTreasury + baseToFarmer each year, every time this is called, look when we took fee last, and linearize the fee to now();
	function _annualFee(address _farmerRewards) internal returns (uint256) {
		uint256 _lastAnnualFeeTime = lastRebalanceUpTime;
		if (_lastAnnualFeeTime >= block.timestamp){
			return 0;
		}

		uint256 _elapsedTime = block.timestamp.sub(_lastAnnualFeeTime);
		uint256 _existingShares = totalShares;
		uint256 _balance = _getTotalUnderlying();

		uint256 _annualPossibleUnderlying = _balance.mul(_elapsedTime).div(365 days);
		uint256 _annualToFarmerUnderlying = _annualPossibleUnderlying.mul(baseToFarmer).div(max);
		uint256 _annualToTreasuryUnderlying = _annualPossibleUnderlying.mul(baseToFarmer).div(max);
		uint256 _annualTotalUnderlying = _annualToFarmerUnderlying.add(_annualToTreasuryUnderlying);

		if (_annualTotalUnderlying == 0){
			return 0;
		}

		uint256 _sharesToMint = _underlyingFeeToShares(_annualTotalUnderlying, _balance, _existingShares);

		uint256 _sharesToFarmer = _sharesToMint.mul(_annualToFarmerUnderlying).div(_annualTotalUnderlying); // by the same ratio
		uint256 _sharesToTreasury = _sharesToMint.sub(_sharesToFarmer);

		_mintShares(_farmerRewards, _sharesToFarmer);
		_mintShares(governance, _sharesToTreasury);

		uint256 _underlyingFarmer = getUnderlyingForShares(_sharesToFarmer);
		uint256 _underlyingTreasury = getUnderlyingForShares(_sharesToTreasury);

		// do two mint events, in underlying, not shares
		emit Transfer(address(0), _farmerRewards, _underlyingFarmer);
		emit Transfer(address(0), governance, _underlyingTreasury);

		return _underlyingFarmer.add(_underlyingTreasury);
	}

	function _underlyingFeeToShares(uint256 _totalFeeUnderlying, uint256 _balance, uint256 _existingShares) pure internal returns (uint256 _sharesToMint){
		// to mint the required amount of fee shares, solve:
		/* 
			ratio:

			    	currentShares 			  newShares		
			-------------------------- : --------------------, where newShares = (currentShares + mintShares)
			(totalUnderlying - feeAmt) 		totalUnderlying

			solved:
			---> (currentShares / (totalUnderlying - feeAmt) * totalUnderlying) - currentShares = mintShares, where newBalanceLessFee = (totalUnderlying - feeAmt)
		*/
		return _existingShares
				.mul(_balance)
				.div(_balance.sub(_totalFeeUnderlying))
				.sub(_existingShares);
	}

	function _calcHotWallet() internal view returns (bool _fundsNeeded, uint256 _amountChange) {
		uint256 _balanceHere = IERC20(underlyingContract).balanceOf(address(this));
		uint256 _balanceFarmed = ACTIVELY_FARMED;

		uint256 _totalAmount = _balanceHere.add(_balanceFarmed);
		uint256 _hotAmount = _totalAmount.mul(hotWalletHoldings).div(max);

		// we have too much in hot wallet, send to farmBoss
		if (_balanceHere >= _hotAmount){
			return (false, _balanceHere.sub(_hotAmount));
		}
		// we have too little in hot wallet, pull from farmBoss
		if (_balanceHere < _hotAmount){
			return (true, _hotAmount.sub(_balanceHere));
		}
	}

	// usually paired with _calcHotWallet()
	function _rebalanceHot(bool _fundsNeeded, uint256 _amountChange) internal {
		if (_fundsNeeded){
			uint256 _before = IERC20(underlyingContract).balanceOf(address(this));
			IERC20(underlyingContract).safeTransferFrom(farmBoss, address(this), _amountChange);
			uint256 _after = IERC20(underlyingContract).balanceOf(address(this));
			uint256 _total = _after.sub(_before);

			require(_total >= _amountChange, "FARMTREASURYV1: bad rebalance, hot wallet needs funds!");

			// we took funds from the farmBoss to refill the hot wallet, reflect this in ACTIVELY_FARMED
			ACTIVELY_FARMED = ACTIVELY_FARMED.sub(_amountChange);

			emit RebalanceHot(_amountChange, 0, block.timestamp);
		}
		else {
			require(farmBoss != address(0), "FARMTREASURYV1: !FarmBoss"); // don't burn funds

			IERC20(underlyingContract).safeTransfer(farmBoss, _amountChange); // _calcHotWallet() guarantees we have funds here to send

			// we sent more funds for the farmer to farm, reflect this
			ACTIVELY_FARMED = ACTIVELY_FARMED.add(_amountChange);

			emit RebalanceHot(0, _amountChange, block.timestamp);
		}
	}

	function _getTotalUnderlying() internal override view returns (uint256) {
		uint256 _balanceHere = IERC20(underlyingContract).balanceOf(address(this));
		uint256 _balanceFarmed = ACTIVELY_FARMED;

		return _balanceHere.add(_balanceFarmed);
	}

	function rescue(address _token, uint256 _amount) external nonReentrant {
        require(msg.sender == governance, "FARMTREASURYV1: !governance");

        if (_token != address(0)){
            IERC20(_token).safeTransfer(governance, _amount);
        }
        else { // if _tokenContract is 0x0, then escape ETH
            governance.transfer(_amount);
        }
    }
}

// SPDX-License-Identifier: MIT
/*
	Inherits FarmTreasuryV1, but allows for direct ETH deposits & withdraws
*/

pragma solidity ^0.6.11;

import "../openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../openzeppelin/contracts/token/ERC20/SafeERC20.sol"; // call ERC20 safely
import "../openzeppelin/contracts/math/SafeMath.sol";
import "../openzeppelin/contracts/utils/Address.sol";

import "../openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "./FarmTreasuryV1.sol";
import "../Interfaces/IWETH.sol";

contract FarmTreasuryV1_ETH is ReentrancyGuard, FarmTreasuryV1 {
	using SafeERC20 for IERC20;
	using SafeMath for uint256;
	using Address for address;

	constructor(string memory _nameUnderlying, uint8 _decimalsUnderlying, address _underlying) public FarmTreasuryV1(_nameUnderlying, _decimalsUnderlying, _underlying){
	}

	receive() payable external {
		// ie: not getting sent back WETH from an unwrapping
		if(msg.sender != underlyingContract){
			depositETH(address(0));
		}
	}

	function depositETH(address _referral) public payable nonReentrant {
		require(msg.value > 0, "FARMTREASURYV1: msg.value == 0");
		require(!paused && !pausedDeposits, "FARMTREASURYV1: paused");

		_deposit(msg.value, _referral);

		IWETH(underlyingContract).deposit{value: msg.value}();
	}

	function withdrawETH(uint256 _amountUnderlying) external nonReentrant {
		require(_amountUnderlying > 0, "FARMTREASURYV1: amount == 0");
		require(!paused, "FARMTREASURYV1: paused");

		_withdraw(_amountUnderlying);

		IWETH(underlyingContract).withdraw(_amountUnderlying);
		msg.sender.transfer(_amountUnderlying);
	}
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.11;

interface IWETH {	
	function deposit() payable external;
	function withdraw(uint256 wad) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "Treasury/FarmTreasuryV1_ETH.sol": "FarmTreasuryV1_ETH"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}