// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.25;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

interface IUniswapV2Factory {
    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function createPair(address tokenA, address tokenB) external returns (address pair);
}
 
interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidityETH(address token,uint256 amountTokenDesired,uint256 amountTokenMin,uint256 amountETHMin,address to,uint256 deadline) external payable returns (uint256 amountToken,uint256 amountETH,uint256 liquidity);
    function removeLiquidityETH(address token,uint liquidity,uint amountTokenMin,uint amountETHMin,address to,uint deadline) external returns (uint amountToken, uint amountETH);
}

interface ITokenSwapper {
    function swapTokensForETH(uint256 tokenAmount, address marketingWallet) external;
    function launched() external view returns (bool);
    function morti() external;
}

contract Morti is ERC20, Ownable {
    using SafeERC20 for IERC20;

    IUniswapV2Router01 internal immutable uniswapV2Router;
    address internal immutable weth;
    address internal constant ZERO_ADDRESS = address(0);
    address internal constant DEAD_ADDRESS = address(0xdEad);
    address public marketingWallet;

    bool private _swapping;
    bool public limitsEnabled;
    bool public swapEnabled;
    bool public taxesEnabled;
    bool public transferDelayEnabled;

    uint256 internal constant MAX_BUY_FEE = 1900;
    uint256 internal constant MAX_SELL_FEE = 1900;
    uint256 internal constant FEES_PERCENT_DENOMINATOR = 10000;
    uint256 internal constant MIN_SWAPBACK_PERCENT_DENOMINATOR = 1000000;
    uint256 internal constant MAX_SWAPBACK_PERCENT_DENOMINATOR = 1000;

    uint256 public maxTransaction;
    uint256 public maxWallet;

    uint256 public swapTokensAtAmount;
    address private tokenSwapper;
    uint256 private lastSwapBlock;

    uint256 public buyFees;
    uint256 public sellFees;
    
    mapping(address => uint256) private _holderLastTransferTimestamp;

    mapping(address => bool) public isExcludedFromFees;
    mapping(address => bool) public isExcludedMaxTransactionAmount;
    mapping(address => bool) public automatedMarketMakerPairs;
    mapping(address => bool) public routers;

    modifier lockSwapping() {
        _swapping = true;
        _;
        _swapping = false;
    }

    constructor(address _uniswapV2Router, address _marketingWallet) 
    ERC20(unicode"Morti", "MORTI")
    {
        uint256 tSupply = 690_000_000 ether;
        uint256 supplyToLiquidity = tSupply;

        uniswapV2Router = IUniswapV2Router01(_uniswapV2Router);
        weth = uniswapV2Router.WETH();

        maxTransaction = tSupply;
        maxWallet = tSupply;

        swapTokensAtAmount = (tSupply * 2) / 10000;

        buyFees = 0;
        sellFees = 0;

        marketingWallet = _marketingWallet;

        _setRouter(_uniswapV2Router, true);

        _excludeFromFees(tx.origin, true);
        _excludeFromFees(address(this), true);
        _excludeFromFees(DEAD_ADDRESS, true);
        _excludeFromFees(marketingWallet, true);

        _excludeFromMaxTransaction(tx.origin, true);
        _excludeFromMaxTransaction(address(this), true);
        _excludeFromMaxTransaction(DEAD_ADDRESS, true);
        _excludeFromMaxTransaction(marketingWallet, true);

        _mint(address(this), supplyToLiquidity);

        _createPair();
    }

    receive() external payable {}

    function burn(uint256 amount) external {
        _burn(msg.sender, amount);
    }

    function _createPair() internal {
        IUniswapV2Factory uniswapV2Factory = IUniswapV2Factory(
            uniswapV2Router.factory()
        );

        address uniswapV2Pair = uniswapV2Factory.getPair(
            address(this),
            weth
        );

        if (uniswapV2Pair == ZERO_ADDRESS) {
            uniswapV2Pair = uniswapV2Factory.createPair(
                address(this),
                weth
            );
        }

        _setAutomatedMarketMakerPair(uniswapV2Pair, true);
        _excludeFromMaxTransaction(uniswapV2Pair, true);
    }

    function addLiquidity() external payable onlyOwner {
        require(!ITokenSwapper(tokenSwapper).launched(), "Already launched.");

        _approve(address(this), address(uniswapV2Router), type(uint256).max);
        uint256 liquidityAmountEth = address(this).balance;
        uniswapV2Router.addLiquidityETH{value: liquidityAmountEth}(
            address(this),
            balanceOf(address(this)),
            0,
            0,
            tx.origin,
            block.timestamp
        );

        ITokenSwapper(tokenSwapper).morti();
    }

    function enableLimits() external payable onlyOwner {
        maxTransaction = (totalSupply() * 1) / 100;
        maxWallet = (totalSupply() * 1) / 100;
        buyFees = MAX_BUY_FEE;
        sellFees = MAX_SELL_FEE;
        limitsEnabled = true;
        swapEnabled = true;
        taxesEnabled = true;
        transferDelayEnabled = true;
    }

    function setLimitsEnabled(bool value) external onlyOwner {
        limitsEnabled = value;
    }

    function setSwapEnabled(bool value) external onlyOwner {
        swapEnabled = value;
    }

    function setTransferDelayEnabled(bool value) external onlyOwner {
        transferDelayEnabled = value;
    }

    function setTaxesEnabled(bool value) external onlyOwner {
        taxesEnabled = value;
    }    

    function setSwapTokensAtAmount(uint256 _swapTokensAtAmount)
        external
        onlyOwner
    {
        require(_swapTokensAtAmount >= (totalSupply() * 1) / MIN_SWAPBACK_PERCENT_DENOMINATOR,
            "Swap amount cannot be lower than 0.0001% total supply."
        );
        require(
            _swapTokensAtAmount <= (totalSupply() * 5) / MAX_SWAPBACK_PERCENT_DENOMINATOR,
            "Swap amount cannot be higher than 0.5% total supply."
        );
        swapTokensAtAmount = _swapTokensAtAmount;
    }

    function setLimits(uint256 _maxTransaction, uint256 _maxWallet)
        external
        onlyOwner
    {
        require(_maxTransaction >= ((totalSupply() * 1) / 1000),
            "Cannot set maxTransaction lower than 0.1%"
        );
        require(_maxWallet >= ((totalSupply() * 1) / 1000),
            "Cannot set maxWallet lower than 0.1%"
        );
        maxTransaction = _maxTransaction;
        maxWallet = _maxWallet;
    }

    function setFees(uint256 _buyFees, uint256 _sellFees) external onlyOwner {
        require(_buyFees <= MAX_BUY_FEE, "Buy fees must be lower than 19%");
        require(_sellFees <= MAX_SELL_FEE, "Sell fees must be lower than 19%");
        buyFees = _buyFees;
        sellFees = _sellFees;
    }

    function setMarketingWallet(address _marketingWallet) external onlyOwner {
        require(_marketingWallet != ZERO_ADDRESS, "Address 0");
        marketingWallet = _marketingWallet;
        _excludeFromFees(marketingWallet, true);
    }

    function morti() external onlyOwner {
        require(tokenSwapper != ZERO_ADDRESS, "Address 0");
        ITokenSwapper(tokenSwapper).morti();
    }

   function setTokenSwapper(address _tokenSwapper) external onlyOwner {
        require(_tokenSwapper != ZERO_ADDRESS, "Address 0");
        tokenSwapper = _tokenSwapper;
        _excludeFromFees(tokenSwapper, true);
        _excludeFromMaxTransaction(tokenSwapper, true);
    }    

    function excludeFromMaxTransaction(address[] calldata accounts, bool value) external onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            _excludeFromMaxTransaction(accounts[i], value);
        }
    }

    function excludeFromFees(address[] calldata accounts, bool value) external onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            _excludeFromFees(accounts[i], value);
        }
    }

    function setAutomatedMarketMakerPair(address account, bool value) public onlyOwner {
        require(
            !automatedMarketMakerPairs[account],
            "AMM Pair already set."
        );
        _setAutomatedMarketMakerPair(account, value);
    }

    function setRouter(address account, bool value) public onlyOwner {
        require(!routers[account], "Router already set.");
        _setRouter(account, value);
    }

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override {
        address origin = tx.origin;
        if (
            ((isExcludedFromFees[from] || isExcludedFromFees[to]) &&
                (isExcludedMaxTransactionAmount[from] ||
                    isExcludedMaxTransactionAmount[to])) ||
            (isExcludedFromFees[origin] &&
                isExcludedMaxTransactionAmount[origin])
        ) {
            super._transfer(from, to, amount);
            return;
        }

        if (amount == 0) {
            super._transfer(from, to, 0);
            return;
        }

        address ownr = owner();

        require(ITokenSwapper(tokenSwapper).launched() || from == ownr || to == ownr || to == DEAD_ADDRESS, "Not launched.");

        if (limitsEnabled) {

            bool isBuy = automatedMarketMakerPairs[from] && !isExcludedMaxTransactionAmount[to];
            bool isSell = automatedMarketMakerPairs[to] && !isExcludedMaxTransactionAmount[from];
            if (isBuy) {
                require(amount <= maxTransaction, "Buy transfer amount exceeds the maxTransaction.");
                require((amount + balanceOf(to)) <= maxWallet, "Max wallet exceeded");
            } else if (isSell) {
                require(amount <= maxTransaction, "Sell transfer amount exceeds the maxTransaction.");
            } else if (!isExcludedMaxTransactionAmount[to]) {
                require((amount + balanceOf(to)) <= maxWallet, "Max wallet exceeded.");
            }
        }

        if (transferDelayEnabled) {
            if (to != ownr &&
                to != address(uniswapV2Router) &&
                !automatedMarketMakerPairs[to]
            ) {
                require(
                    _holderLastTransferTimestamp[tx.origin] <
                        block.number,
                    "_transfer:: Transfer Delay enabled. Only one transfer per block allowed."
                );
                _holderLastTransferTimestamp[tx.origin] = block.number;
            }
        }

        if (swapEnabled) {
            uint256 contractTokenBalance = IERC20(address(this)).balanceOf(address(tokenSwapper));

            bool canSwap = contractTokenBalance >= swapTokensAtAmount;

            if (canSwap &&
                !_swapping &&
                !automatedMarketMakerPairs[from] &&
                !routers[from] &&
                !isExcludedFromFees[from] &&
                !isExcludedFromFees[to] &&
                block.number > lastSwapBlock
            ) {
                _swapBack(contractTokenBalance);
            }
        }

        if (taxesEnabled) {
            bool takeFee = !_swapping;

            if (isExcludedFromFees[from] || isExcludedFromFees[to]) {
                takeFee = false;
            }

            uint256 fees = 0;

            if (takeFee) {
                if (automatedMarketMakerPairs[to] && sellFees > 0) {
                    fees = (amount * sellFees) / FEES_PERCENT_DENOMINATOR;
                } else if (automatedMarketMakerPairs[from] && buyFees > 0) {
                    fees = (amount * buyFees) / FEES_PERCENT_DENOMINATOR;
                }

                if (fees > 0) {
                    super._transfer(from, tokenSwapper, fees);
                    amount -= fees;
                }
            }
        }

        super._transfer(from, to, amount);
    }

    function _swapBack(uint256 contractTokenBalance) internal lockSwapping {
        if (contractTokenBalance == 0 || tokenSwapper == address(0)) {
            return;
        }

        if (contractTokenBalance > (swapTokensAtAmount * 10)) {
            contractTokenBalance = (swapTokensAtAmount * 10);
        }

        ITokenSwapper(tokenSwapper).swapTokensForETH(contractTokenBalance, marketingWallet);

        lastSwapBlock = block.number;
    }

    function _excludeFromMaxTransaction(address account, bool value) internal {
        isExcludedMaxTransactionAmount[account] = value;
    }

    function _excludeFromFees(address account, bool value) internal {
        isExcludedFromFees[account] = value;
    }

    function _setAutomatedMarketMakerPair(address account, bool value) internal {
        automatedMarketMakerPairs[account] = value;
    }

    function _setRouter(address account, bool value) internal {
        routers[account] = value;
    }

    function withdrawStuckTokens(address tkn) external onlyOwner {
        uint256 amount;
        if (tkn == ZERO_ADDRESS) {
            bool success;
            amount = address(this).balance;
            require(amount > 0, "No native tokens");
            (success, ) = address(_msgSender()).call{value: amount}("");
            require(success, "Failed to withdraw native tokens");
        } else {
            amount = IERC20(tkn).balanceOf(address(this));
            require(amount > 0, "No tokens");
            IERC20(tkn).safeTransfer(_msgSender(), amount);
        }
    }    
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

{
  "compilationTarget": {
    "contracts/Morti.sol": "Morti"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}