CultOfETH level 3

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// Created by DegenLabs https://degenlabs.one

pragma solidity ^0.8.15;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../mocks/ERC721A.sol";

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import { DefaultOperatorFilterer } from "../libs/DefaultOperatorFilterer.sol";

interface IParentContract {
	function sacrificeFromNextLvl(uint256[] memory tokens, address tokenOwner) external;
}

contract CultOfETHlevel is ERC721A, Ownable, DefaultOperatorFilterer, ReentrancyGuard {
	using SafeERC20 for IERC20;

	bool public enabled = false;
	address private previousLevelContract;
	address private nextLevelContract;

	string public uri;
	uint256 public sacrificeAmount;

	constructor(
		address _previousLevelContract,
		string memory _name,
		string memory _symbol,
		string memory _uri,
		uint256 _sacrificeAmount
	) ERC721A(_name, _symbol) {
		uri = _uri;
		sacrificeAmount = _sacrificeAmount;
		previousLevelContract = _previousLevelContract;
	}

	function _baseURI() internal view override returns (string memory) {
		return uri;
	}

	function totalMinted() public view returns (uint256) {
		return _totalMinted();
	}

	function sacrifice(uint256[] memory tokens) external {
		require(enabled, "PAUSED");
		require(tokens.length == sacrificeAmount, "INVALID_TOKENS_AMOUNT");

		for (uint256 i = 0; i < tokens.length; i++) {
			for (uint256 j = 0; j < tokens.length; j++) {
				if (i == j) {
					continue;
				}
				require(tokens[i] != tokens[j], "DUPLICATE");
			}
		}

		IParentContract(previousLevelContract).sacrificeFromNextLvl(tokens, msg.sender);
		_safeMint(msg.sender, 1);
	}

	function sacrificeFromNextLvl(uint256[] memory tokens, address tokenOwner) external {
		require(msg.sender == nextLevelContract, "Lvl: DENIED");
		require(tokens.length > 0, "Lvl: EMPTY");

		for (uint256 i = 0; i < tokens.length; i++) {
			require(ownerOf(tokens[i]) == tokenOwner, "Lvl: NOT_OWNER");
		}

		for (uint256 i = 0; i < tokens.length; i++) {
			_burn(tokens[i]);
		}
	}

	// ONLY OWNER SECTION

	function setPreviousLvlContract(address _previousLevelContract) external onlyOwner {
		previousLevelContract = _previousLevelContract;
	}

	function setNextLvlContract(address _nextLevelContract) external onlyOwner {
		nextLevelContract = _nextLevelContract;
	}

	function setBaseURI(string memory newBaseURI) external onlyOwner {
		uri = newBaseURI;
	}

	function start() external onlyOwner {
		enabled = true;
	}

	function pause() external onlyOwner {
		enabled = false;
	}

	function recoverERC20(address tokenAddress, uint256 tokenAmount) external onlyOwner {
		IERC20(tokenAddress).safeTransfer(msg.sender, tokenAmount);
	}

	function withdraw() public onlyOwner {
		(bool success, ) = payable(msg.sender).call{ value: address(this).balance }("");
		require(success);
	}

	// FEES

	function transferFrom(
		address from,
		address to,
		uint256 tokenId
	) public override onlyAllowedOperator(from) {
		super.transferFrom(from, to, tokenId);
	}

	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId
	) public override onlyAllowedOperator(from) {
		super.safeTransferFrom(from, to, tokenId);
	}

	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId,
		bytes memory data
	) public override onlyAllowedOperator(from) {
		super.safeTransferFrom(from, to, tokenId, data);
	}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import { OperatorFilterer } from "./OperatorFilterer.sol";

abstract contract DefaultOperatorFilterer is OperatorFilterer {
	address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);

	constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.15;

import "./IERC721A.sol";

/**
 * @dev ERC721 token receiver interface.
 */
interface ERC721A__IERC721Receiver {
	function onERC721Received(
		address operator,
		address from,
		uint256 tokenId,
		bytes calldata data
	) external returns (bytes4);
}

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
 *
 * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 *
 * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
	// Mask of an entry in packed address data.
	uint256 private constant BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

	// The bit position of `numberMinted` in packed address data.
	uint256 private constant BITPOS_NUMBER_MINTED = 64;

	// The bit position of `numberBurned` in packed address data.
	uint256 private constant BITPOS_NUMBER_BURNED = 128;

	// The bit position of `aux` in packed address data.
	uint256 private constant BITPOS_AUX = 192;

	// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
	uint256 private constant BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

	// The bit position of `startTimestamp` in packed ownership.
	uint256 private constant BITPOS_START_TIMESTAMP = 160;

	// The bit mask of the `burned` bit in packed ownership.
	uint256 private constant BITMASK_BURNED = 1 << 224;

	// The bit position of the `nextInitialized` bit in packed ownership.
	uint256 private constant BITPOS_NEXT_INITIALIZED = 225;

	// The bit mask of the `nextInitialized` bit in packed ownership.
	uint256 private constant BITMASK_NEXT_INITIALIZED = 1 << 225;

	// The tokenId of the next token to be minted.
	uint256 private _currentIndex;

	// The number of tokens burned.
	uint256 private _burnCounter;

	// Token name
	string private _name;

	// Token symbol
	string private _symbol;

	// Mapping from token ID to ownership details
	// An empty struct value does not necessarily mean the token is unowned.
	// See `_packedOwnershipOf` implementation for details.
	//
	// Bits Layout:
	// - [0..159]   `addr`
	// - [160..223] `startTimestamp`
	// - [224]      `burned`
	// - [225]      `nextInitialized`
	mapping(uint256 => uint256) private _packedOwnerships;

	// Mapping owner address to address data.
	//
	// Bits Layout:
	// - [0..63]    `balance`
	// - [64..127]  `numberMinted`
	// - [128..191] `numberBurned`
	// - [192..255] `aux`
	mapping(address => uint256) private _packedAddressData;

	// Mapping from token ID to approved address.
	mapping(uint256 => address) private _tokenApprovals;

	// Mapping from owner to operator approvals
	mapping(address => mapping(address => bool)) private _operatorApprovals;

	constructor(string memory name_, string memory symbol_) {
		_name = name_;
		_symbol = symbol_;
		_currentIndex = _startTokenId();
	}

	/**
	 * @dev Returns the starting token ID.
	 * To change the starting token ID, please override this function.
	 */
	function _startTokenId() internal view virtual returns (uint256) {
		return 0;
	}

	/**
	 * @dev Returns the next token ID to be minted.
	 */
	function _nextTokenId() internal view returns (uint256) {
		return _currentIndex;
	}

	/**
	 * @dev Returns the total number of tokens in existence.
	 * Burned tokens will reduce the count.
	 * To get the total number of tokens minted, please see `_totalMinted`.
	 */
	function totalSupply() public view override returns (uint256) {
		// Counter underflow is impossible as _burnCounter cannot be incremented
		// more than `_currentIndex - _startTokenId()` times.
		unchecked {
			return _currentIndex - _burnCounter - _startTokenId();
		}
	}

	/**
	 * @dev Returns the total amount of tokens minted in the contract.
	 */
	function _totalMinted() internal view returns (uint256) {
		// Counter underflow is impossible as _currentIndex does not decrement,
		// and it is initialized to `_startTokenId()`
		unchecked {
			return _currentIndex - _startTokenId();
		}
	}

	/**
	 * @dev Returns the total number of tokens burned.
	 */
	function _totalBurned() internal view returns (uint256) {
		return _burnCounter;
	}

	/**
	 * @dev See {IERC165-supportsInterface}.
	 */
	function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
		// The interface IDs are constants representing the first 4 bytes of the XOR of
		// all function selectors in the interface. See: https://eips.ethereum.org/EIPS/eip-165
		// e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`
		return
			interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
			interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
			interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
	}

	/**
	 * @dev See {IERC721-balanceOf}.
	 */
	function balanceOf(address owner) public view override returns (uint256) {
		if (owner == address(0)) revert BalanceQueryForZeroAddress();
		return _packedAddressData[owner] & BITMASK_ADDRESS_DATA_ENTRY;
	}

	/**
	 * Returns the number of tokens minted by `owner`.
	 */
	function _numberMinted(address owner) internal view returns (uint256) {
		return (_packedAddressData[owner] >> BITPOS_NUMBER_MINTED) & BITMASK_ADDRESS_DATA_ENTRY;
	}

	/**
	 * Returns the number of tokens burned by or on behalf of `owner`.
	 */
	function _numberBurned(address owner) internal view returns (uint256) {
		return (_packedAddressData[owner] >> BITPOS_NUMBER_BURNED) & BITMASK_ADDRESS_DATA_ENTRY;
	}

	/**
	 * Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
	 */
	function _getAux(address owner) internal view returns (uint64) {
		return uint64(_packedAddressData[owner] >> BITPOS_AUX);
	}

	/**
	 * Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
	 * If there are multiple variables, please pack them into a uint64.
	 */
	function _setAux(address owner, uint64 aux) internal {
		uint256 packed = _packedAddressData[owner];
		uint256 auxCasted;
		assembly {
			// Cast aux without masking.
			auxCasted := aux
		}
		packed = (packed & BITMASK_AUX_COMPLEMENT) | (auxCasted << BITPOS_AUX);
		_packedAddressData[owner] = packed;
	}

	/**
	 * Returns the packed ownership data of `tokenId`.
	 */
	function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
		uint256 curr = tokenId;

		unchecked {
			if (_startTokenId() <= curr)
				if (curr < _currentIndex) {
					uint256 packed = _packedOwnerships[curr];
					// If not burned.
					if (packed & BITMASK_BURNED == 0) {
						// Invariant:
						// There will always be an ownership that has an address and is not burned
						// before an ownership that does not have an address and is not burned.
						// Hence, curr will not underflow.
						//
						// We can directly compare the packed value.
						// If the address is zero, packed is zero.
						while (packed == 0) {
							packed = _packedOwnerships[--curr];
						}
						return packed;
					}
				}
		}
		revert OwnerQueryForNonexistentToken();
	}

	/**
	 * Returns the unpacked `TokenOwnership` struct from `packed`.
	 */
	function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
		ownership.addr = address(uint160(packed));
		ownership.startTimestamp = uint64(packed >> BITPOS_START_TIMESTAMP);
		ownership.burned = packed & BITMASK_BURNED != 0;
	}

	/**
	 * Returns the unpacked `TokenOwnership` struct at `index`.
	 */
	function _ownershipAt(uint256 index) internal view returns (TokenOwnership memory) {
		return _unpackedOwnership(_packedOwnerships[index]);
	}

	/**
	 * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
	 */
	function _initializeOwnershipAt(uint256 index) internal {
		if (_packedOwnerships[index] == 0) {
			_packedOwnerships[index] = _packedOwnershipOf(index);
		}
	}

	/**
	 * Gas spent here starts off proportional to the maximum mint batch size.
	 * It gradually moves to O(1) as tokens get transferred around in the collection over time.
	 */
	function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
		return _unpackedOwnership(_packedOwnershipOf(tokenId));
	}

	/**
	 * @dev See {IERC721-ownerOf}.
	 */
	function ownerOf(uint256 tokenId) public view override returns (address) {
		return address(uint160(_packedOwnershipOf(tokenId)));
	}

	/**
	 * @dev See {IERC721Metadata-name}.
	 */
	function name() public view virtual override returns (string memory) {
		return _name;
	}

	/**
	 * @dev See {IERC721Metadata-symbol}.
	 */
	function symbol() public view virtual override returns (string memory) {
		return _symbol;
	}

	/**
	 * @dev See {IERC721Metadata-tokenURI}.
	 */
	function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
		if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

		string memory baseURI = _baseURI();
		return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : "";
	}

	/**
	 * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
	 * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
	 * by default, can be overriden in child contracts.
	 */
	function _baseURI() internal view virtual returns (string memory) {
		return "";
	}

	/**
	 * @dev Casts the address to uint256 without masking.
	 */
	function _addressToUint256(address value) private pure returns (uint256 result) {
		assembly {
			result := value
		}
	}

	/**
	 * @dev Casts the boolean to uint256 without branching.
	 */
	function _boolToUint256(bool value) private pure returns (uint256 result) {
		assembly {
			result := value
		}
	}

	/**
	 * @dev See {IERC721-approve}.
	 */
	function approve(address to, uint256 tokenId) public override {
		address owner = address(uint160(_packedOwnershipOf(tokenId)));
		if (to == owner) revert ApprovalToCurrentOwner();

		if (_msgSenderERC721A() != owner)
			if (!isApprovedForAll(owner, _msgSenderERC721A())) {
				revert ApprovalCallerNotOwnerNorApproved();
			}

		_tokenApprovals[tokenId] = to;
		emit Approval(owner, to, tokenId);
	}

	/**
	 * @dev See {IERC721-getApproved}.
	 */
	function getApproved(uint256 tokenId) public view override returns (address) {
		if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

		return _tokenApprovals[tokenId];
	}

	/**
	 * @dev See {IERC721-setApprovalForAll}.
	 */
	function setApprovalForAll(address operator, bool approved) public virtual override {
		if (operator == _msgSenderERC721A()) revert ApproveToCaller();

		_operatorApprovals[_msgSenderERC721A()][operator] = approved;
		emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
	}

	/**
	 * @dev See {IERC721-isApprovedForAll}.
	 */
	function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
		return _operatorApprovals[owner][operator];
	}

	/**
	 * @dev See {IERC721-transferFrom}.
	 */
	function transferFrom(
		address from,
		address to,
		uint256 tokenId
	) public virtual override {
		_transfer(from, to, tokenId);
	}

	/**
	 * @dev See {IERC721-safeTransferFrom}.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId
	) public virtual override {
		safeTransferFrom(from, to, tokenId, "");
	}

	/**
	 * @dev See {IERC721-safeTransferFrom}.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId,
		bytes memory _data
	) public virtual override {
		_transfer(from, to, tokenId);
		if (to.code.length != 0)
			if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
				revert TransferToNonERC721ReceiverImplementer();
			}
	}

	/**
	 * @dev Returns whether `tokenId` exists.
	 *
	 * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
	 *
	 * Tokens start existing when they are minted (`_mint`),
	 */
	function _exists(uint256 tokenId) internal view returns (bool) {
		return
			_startTokenId() <= tokenId &&
			tokenId < _currentIndex && // If within bounds,
			_packedOwnerships[tokenId] & BITMASK_BURNED == 0; // and not burned.
	}

	/**
	 * @dev Equivalent to `_safeMint(to, quantity, '')`.
	 */
	function _safeMint(address to, uint256 quantity) internal {
		_safeMint(to, quantity, "");
	}

	/**
	 * @dev Safely mints `quantity` tokens and transfers them to `to`.
	 *
	 * Requirements:
	 *
	 * - If `to` refers to a smart contract, it must implement
	 *   {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
	 * - `quantity` must be greater than 0.
	 *
	 * Emits a {Transfer} event.
	 */
	function _safeMint(
		address to,
		uint256 quantity,
		bytes memory _data
	) internal {
		uint256 startTokenId = _currentIndex;
		if (to == address(0)) revert MintToZeroAddress();
		if (quantity == 0) revert MintZeroQuantity();

		_beforeTokenTransfers(address(0), to, startTokenId, quantity);

		// Overflows are incredibly unrealistic.
		// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
		// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
		unchecked {
			// Updates:
			// - `balance += quantity`.
			// - `numberMinted += quantity`.
			//
			// We can directly add to the balance and number minted.
			_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);

			// Updates:
			// - `address` to the owner.
			// - `startTimestamp` to the timestamp of minting.
			// - `burned` to `false`.
			// - `nextInitialized` to `quantity == 1`.
			_packedOwnerships[startTokenId] =
				_addressToUint256(to) |
				(block.timestamp << BITPOS_START_TIMESTAMP) |
				(_boolToUint256(quantity == 1) << BITPOS_NEXT_INITIALIZED);

			uint256 updatedIndex = startTokenId;
			uint256 end = updatedIndex + quantity;

			if (to.code.length != 0) {
				do {
					emit Transfer(address(0), to, updatedIndex);
					if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
						revert TransferToNonERC721ReceiverImplementer();
					}
				} while (updatedIndex < end);
				// Reentrancy protection
				if (_currentIndex != startTokenId) revert();
			} else {
				do {
					emit Transfer(address(0), to, updatedIndex++);
				} while (updatedIndex < end);
			}
			_currentIndex = updatedIndex;
		}
		_afterTokenTransfers(address(0), to, startTokenId, quantity);
	}

	/**
	 * @dev Mints `quantity` tokens and transfers them to `to`.
	 *
	 * Requirements:
	 *
	 * - `to` cannot be the zero address.
	 * - `quantity` must be greater than 0.
	 *
	 * Emits a {Transfer} event.
	 */
	function _mint(address to, uint256 quantity) internal {
		uint256 startTokenId = _currentIndex;
		if (to == address(0)) revert MintToZeroAddress();
		if (quantity == 0) revert MintZeroQuantity();

		_beforeTokenTransfers(address(0), to, startTokenId, quantity);

		// Overflows are incredibly unrealistic.
		// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
		// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
		unchecked {
			// Updates:
			// - `balance += quantity`.
			// - `numberMinted += quantity`.
			//
			// We can directly add to the balance and number minted.
			_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);

			// Updates:
			// - `address` to the owner.
			// - `startTimestamp` to the timestamp of minting.
			// - `burned` to `false`.
			// - `nextInitialized` to `quantity == 1`.
			_packedOwnerships[startTokenId] =
				_addressToUint256(to) |
				(block.timestamp << BITPOS_START_TIMESTAMP) |
				(_boolToUint256(quantity == 1) << BITPOS_NEXT_INITIALIZED);

			uint256 updatedIndex = startTokenId;
			uint256 end = updatedIndex + quantity;

			do {
				emit Transfer(address(0), to, updatedIndex++);
			} while (updatedIndex < end);

			_currentIndex = updatedIndex;
		}
		_afterTokenTransfers(address(0), to, startTokenId, quantity);
	}

	/**
	 * @dev Transfers `tokenId` from `from` to `to`.
	 *
	 * Requirements:
	 *
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must be owned by `from`.
	 *
	 * Emits a {Transfer} event.
	 */
	function _transfer(
		address from,
		address to,
		uint256 tokenId
	) private {
		uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

		if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

		bool isApprovedOrOwner = (_msgSenderERC721A() == from ||
			isApprovedForAll(from, _msgSenderERC721A()) ||
			getApproved(tokenId) == _msgSenderERC721A());

		if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
		if (to == address(0)) revert TransferToZeroAddress();

		_beforeTokenTransfers(from, to, tokenId, 1);

		// Clear approvals from the previous owner.
		delete _tokenApprovals[tokenId];

		// Underflow of the sender's balance is impossible because we check for
		// ownership above and the recipient's balance can't realistically overflow.
		// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
		unchecked {
			// We can directly increment and decrement the balances.
			--_packedAddressData[from]; // Updates: `balance -= 1`.
			++_packedAddressData[to]; // Updates: `balance += 1`.

			// Updates:
			// - `address` to the next owner.
			// - `startTimestamp` to the timestamp of transfering.
			// - `burned` to `false`.
			// - `nextInitialized` to `true`.
			_packedOwnerships[tokenId] =
				_addressToUint256(to) |
				(block.timestamp << BITPOS_START_TIMESTAMP) |
				BITMASK_NEXT_INITIALIZED;

			// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
			if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
				uint256 nextTokenId = tokenId + 1;
				// If the next slot's address is zero and not burned (i.e. packed value is zero).
				if (_packedOwnerships[nextTokenId] == 0) {
					// If the next slot is within bounds.
					if (nextTokenId != _currentIndex) {
						// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
						_packedOwnerships[nextTokenId] = prevOwnershipPacked;
					}
				}
			}
		}

		emit Transfer(from, to, tokenId);
		_afterTokenTransfers(from, to, tokenId, 1);
	}

	/**
	 * @dev Equivalent to `_burn(tokenId, false)`.
	 */
	function _burn(uint256 tokenId) internal virtual {
		_burn(tokenId, false);
	}

	/**
	 * @dev Destroys `tokenId`.
	 * The approval is cleared when the token is burned.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 *
	 * Emits a {Transfer} event.
	 */
	function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
		uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

		address from = address(uint160(prevOwnershipPacked));

		if (approvalCheck) {
			bool isApprovedOrOwner = (_msgSenderERC721A() == from ||
				isApprovedForAll(from, _msgSenderERC721A()) ||
				getApproved(tokenId) == _msgSenderERC721A());

			if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
		}

		_beforeTokenTransfers(from, address(0), tokenId, 1);

		// Clear approvals from the previous owner.
		delete _tokenApprovals[tokenId];

		// Underflow of the sender's balance is impossible because we check for
		// ownership above and the recipient's balance can't realistically overflow.
		// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
		unchecked {
			// Updates:
			// - `balance -= 1`.
			// - `numberBurned += 1`.
			//
			// We can directly decrement the balance, and increment the number burned.
			// This is equivalent to `packed -= 1; packed += 1 << BITPOS_NUMBER_BURNED;`.
			_packedAddressData[from] += (1 << BITPOS_NUMBER_BURNED) - 1;

			// Updates:
			// - `address` to the last owner.
			// - `startTimestamp` to the timestamp of burning.
			// - `burned` to `true`.
			// - `nextInitialized` to `true`.
			_packedOwnerships[tokenId] =
				_addressToUint256(from) |
				(block.timestamp << BITPOS_START_TIMESTAMP) |
				BITMASK_BURNED |
				BITMASK_NEXT_INITIALIZED;

			// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
			if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
				uint256 nextTokenId = tokenId + 1;
				// If the next slot's address is zero and not burned (i.e. packed value is zero).
				if (_packedOwnerships[nextTokenId] == 0) {
					// If the next slot is within bounds.
					if (nextTokenId != _currentIndex) {
						// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
						_packedOwnerships[nextTokenId] = prevOwnershipPacked;
					}
				}
			}
		}

		emit Transfer(from, address(0), tokenId);
		_afterTokenTransfers(from, address(0), tokenId, 1);

		// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
		unchecked {
			_burnCounter++;
		}
	}

	/**
	 * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
	 *
	 * @param from address representing the previous owner of the given token ID
	 * @param to target address that will receive the tokens
	 * @param tokenId uint256 ID of the token to be transferred
	 * @param _data bytes optional data to send along with the call
	 * @return bool whether the call correctly returned the expected magic value
	 */
	function _checkContractOnERC721Received(
		address from,
		address to,
		uint256 tokenId,
		bytes memory _data
	) private returns (bool) {
		try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
			bytes4 retval
		) {
			return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
		} catch (bytes memory reason) {
			if (reason.length == 0) {
				revert TransferToNonERC721ReceiverImplementer();
			} else {
				assembly {
					revert(add(32, reason), mload(reason))
				}
			}
		}
	}

	/**
	 * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
	 * And also called before burning one token.
	 *
	 * startTokenId - the first token id to be transferred
	 * quantity - the amount to be transferred
	 *
	 * Calling conditions:
	 *
	 * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
	 * transferred to `to`.
	 * - When `from` is zero, `tokenId` will be minted for `to`.
	 * - When `to` is zero, `tokenId` will be burned by `from`.
	 * - `from` and `to` are never both zero.
	 */
	function _beforeTokenTransfers(
		address from,
		address to,
		uint256 startTokenId,
		uint256 quantity
	) internal virtual {}

	/**
	 * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
	 * minting.
	 * And also called after one token has been burned.
	 *
	 * startTokenId - the first token id to be transferred
	 * quantity - the amount to be transferred
	 *
	 * Calling conditions:
	 *
	 * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
	 * transferred to `to`.
	 * - When `from` is zero, `tokenId` has been minted for `to`.
	 * - When `to` is zero, `tokenId` has been burned by `from`.
	 * - `from` and `to` are never both zero.
	 */
	function _afterTokenTransfers(
		address from,
		address to,
		uint256 startTokenId,
		uint256 quantity
	) internal virtual {}

	/**
	 * @dev Returns the message sender (defaults to `msg.sender`).
	 *
	 * If you are writing GSN compatible contracts, you need to override this function.
	 */
	function _msgSenderERC721A() internal view virtual returns (address) {
		return msg.sender;
	}

	/**
	 * @dev Converts a `uint256` to its ASCII `string` decimal representation.
	 */
	function _toString(uint256 value) internal pure returns (string memory ptr) {
		assembly {
			// The maximum value of a uint256 contains 78 digits (1 byte per digit),
			// but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged.
			// We will need 1 32-byte word to store the length,
			// and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128.
			ptr := add(mload(0x40), 128)
			// Update the free memory pointer to allocate.
			mstore(0x40, ptr)

			// Cache the end of the memory to calculate the length later.
			let end := ptr

			// We write the string from the rightmost digit to the leftmost digit.
			// The following is essentially a do-while loop that also handles the zero case.
			// Costs a bit more than early returning for the zero case,
			// but cheaper in terms of deployment and overall runtime costs.
			for {
				// Initialize and perform the first pass without check.
				let temp := value
				// Move the pointer 1 byte leftwards to point to an empty character slot.
				ptr := sub(ptr, 1)
				// Write the character to the pointer. 48 is the ASCII index of '0'.
				mstore8(ptr, add(48, mod(temp, 10)))
				temp := div(temp, 10)
			} temp {
				// Keep dividing `temp` until zero.
				temp := div(temp, 10)
			} {
				// Body of the for loop.
				ptr := sub(ptr, 1)
				mstore8(ptr, add(48, mod(temp, 10)))
			}

			let length := sub(end, ptr)
			// Move the pointer 32 bytes leftwards to make room for the length.
			ptr := sub(ptr, 32)
			// Store the length.
			mstore(ptr, length)
		}
	}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.15;

/**
 * @dev Interface of an ERC721A compliant contract.
 */
interface IERC721A {
	/**
	 * The caller must own the token or be an approved operator.
	 */
	error ApprovalCallerNotOwnerNorApproved();

	/**
	 * The token does not exist.
	 */
	error ApprovalQueryForNonexistentToken();

	/**
	 * The caller cannot approve to their own address.
	 */
	error ApproveToCaller();

	/**
	 * The caller cannot approve to the current owner.
	 */
	error ApprovalToCurrentOwner();

	/**
	 * Cannot query the balance for the zero address.
	 */
	error BalanceQueryForZeroAddress();

	/**
	 * Cannot mint to the zero address.
	 */
	error MintToZeroAddress();

	/**
	 * The quantity of tokens minted must be more than zero.
	 */
	error MintZeroQuantity();

	/**
	 * The token does not exist.
	 */
	error OwnerQueryForNonexistentToken();

	/**
	 * The caller must own the token or be an approved operator.
	 */
	error TransferCallerNotOwnerNorApproved();

	/**
	 * The token must be owned by `from`.
	 */
	error TransferFromIncorrectOwner();

	/**
	 * Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
	 */
	error TransferToNonERC721ReceiverImplementer();

	/**
	 * Cannot transfer to the zero address.
	 */
	error TransferToZeroAddress();

	/**
	 * The token does not exist.
	 */
	error URIQueryForNonexistentToken();

	struct TokenOwnership {
		// The address of the owner.
		address addr;
		// Keeps track of the start time of ownership with minimal overhead for tokenomics.
		uint64 startTimestamp;
		// Whether the token has been burned.
		bool burned;
	}

	/**
	 * @dev Returns the total amount of tokens stored by the contract.
	 *
	 * Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
	 */
	function totalSupply() external view returns (uint256);

	// ==============================
	//            IERC165
	// ==============================

	/**
	 * @dev Returns true if this contract implements the interface defined by
	 * `interfaceId`. See the corresponding
	 * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
	 * to learn more about how these ids are created.
	 *
	 * This function call must use less than 30 000 gas.
	 */
	function supportsInterface(bytes4 interfaceId) external view returns (bool);

	// ==============================
	//            IERC721
	// ==============================

	/**
	 * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
	 */
	event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

	/**
	 * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
	 */
	event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

	/**
	 * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
	 */
	event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

	/**
	 * @dev Returns the number of tokens in ``owner``'s account.
	 */
	function balanceOf(address owner) external view returns (uint256 balance);

	/**
	 * @dev Returns the owner of the `tokenId` token.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 */
	function ownerOf(uint256 tokenId) external view returns (address owner);

	/**
	 * @dev Safely transfers `tokenId` token from `from` to `to`.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must exist and be owned by `from`.
	 * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId,
		bytes calldata data
	) external;

	/**
	 * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
	 * are aware of the ERC721 protocol to prevent tokens from being forever locked.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must exist and be owned by `from`.
	 * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId
	) external;

	/**
	 * @dev Transfers `tokenId` token from `from` to `to`.
	 *
	 * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must be owned by `from`.
	 * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
	 *
	 * Emits a {Transfer} event.
	 */
	function transferFrom(
		address from,
		address to,
		uint256 tokenId
	) external;

	/**
	 * @dev Gives permission to `to` to transfer `tokenId` token to another account.
	 * The approval is cleared when the token is transferred.
	 *
	 * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
	 *
	 * Requirements:
	 *
	 * - The caller must own the token or be an approved operator.
	 * - `tokenId` must exist.
	 *
	 * Emits an {Approval} event.
	 */
	function approve(address to, uint256 tokenId) external;

	/**
	 * @dev Approve or remove `operator` as an operator for the caller.
	 * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
	 *
	 * Requirements:
	 *
	 * - The `operator` cannot be the caller.
	 *
	 * Emits an {ApprovalForAll} event.
	 */
	function setApprovalForAll(address operator, bool _approved) external;

	/**
	 * @dev Returns the account approved for `tokenId` token.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 */
	function getApproved(uint256 tokenId) external view returns (address operator);

	/**
	 * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
	 *
	 * See {setApprovalForAll}
	 */
	function isApprovedForAll(address owner, address operator) external view returns (bool);

	// ==============================
	//        IERC721Metadata
	// ==============================

	/**
	 * @dev Returns the token collection name.
	 */
	function name() external view returns (string memory);

	/**
	 * @dev Returns the token collection symbol.
	 */
	function symbol() external view returns (string memory);

	/**
	 * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
	 */
	function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
	function isOperatorAllowed(address registrant, address operator) external view returns (bool);

	function register(address registrant) external;

	function registerAndSubscribe(address registrant, address subscription) external;

	function registerAndCopyEntries(address registrant, address registrantToCopy) external;

	function unregister(address addr) external;

	function updateOperator(
		address registrant,
		address operator,
		bool filtered
	) external;

	function updateOperators(
		address registrant,
		address[] calldata operators,
		bool filtered
	) external;

	function updateCodeHash(
		address registrant,
		bytes32 codehash,
		bool filtered
	) external;

	function updateCodeHashes(
		address registrant,
		bytes32[] calldata codeHashes,
		bool filtered
	) external;

	function subscribe(address registrant, address registrantToSubscribe) external;

	function unsubscribe(address registrant, bool copyExistingEntries) external;

	function subscriptionOf(address addr) external returns (address registrant);

	function subscribers(address registrant) external returns (address[] memory);

	function subscriberAt(address registrant, uint256 index) external returns (address);

	function copyEntriesOf(address registrant, address registrantToCopy) external;

	function isOperatorFiltered(address registrant, address operator) external returns (bool);

	function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);

	function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);

	function filteredOperators(address addr) external returns (address[] memory);

	function filteredCodeHashes(address addr) external returns (bytes32[] memory);

	function filteredOperatorAt(address registrant, uint256 index) external returns (address);

	function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);

	function isRegistered(address addr) external returns (bool);

	function codeHashOf(address addr) external returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import { IOperatorFilterRegistry } from "./IOperatorFilterRegistry.sol";

abstract contract OperatorFilterer {
	error OperatorNotAllowed(address operator);

	IOperatorFilterRegistry constant operatorFilterRegistry =
		IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);

	constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
		// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
		// will not revert, but the contract will need to be registered with the registry once it is deployed in
		// order for the modifier to filter addresses.
		if (address(operatorFilterRegistry).code.length > 0) {
			if (subscribe) {
				operatorFilterRegistry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
			} else {
				if (subscriptionOrRegistrantToCopy != address(0)) {
					operatorFilterRegistry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
				} else {
					operatorFilterRegistry.register(address(this));
				}
			}
		}
	}

	modifier onlyAllowedOperator(address from) virtual {
		// Check registry code length to facilitate testing in environments without a deployed registry.
		if (address(operatorFilterRegistry).code.length > 0) {
			// Allow spending tokens from addresses with balance
			// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
			// from an EOA.
			if (from == msg.sender) {
				_;
				return;
			}
			if (
				!(operatorFilterRegistry.isOperatorAllowed(address(this), msg.sender) &&
					operatorFilterRegistry.isOperatorAllowed(address(this), from))
			) {
				revert OperatorNotAllowed(msg.sender);
			}
		}
		_;
	}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

{
  "compilationTarget": {
    "contracts/CultOfETH/CultLevel.sol": "CultOfETHlevel"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}