Skull Dungeon: Graveyard

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import "../contracts/SkullDungeon.sol";

//
// ██████╗░░█████╗░░█████╗░███╗░░░███╗░██████╗██╗░░██╗██╗░░░██╗██╗░░░░░██╗░░░░░
// ██╔══██╗██╔══██╗██╔══██╗████╗░████║██╔════╝██║░██╔╝██║░░░██║██║░░░░░██║░░░░░
// ██║░░██║██║░░██║██║░░██║██╔████╔██║╚█████╗░█████═╝░██║░░░██║██║░░░░░██║░░░░░
// ██║░░██║██║░░██║██║░░██║██║╚██╔╝██║░╚═══██╗██╔═██╗░██║░░░██║██║░░░░░██║░░░░░
// ██████╔╝╚█████╔╝╚█████╔╝██║░╚═╝░██║██████╔╝██║░╚██╗╚██████╔╝███████╗███████╗
// ╚═════╝░░╚════╝░░╚════╝░╚═╝░░░░░╚═╝╚═════╝░╚═╝░░╚═╝░╚═════╝░╚══════╝╚══════╝
//
// ██████╗░██╗░░░██╗███╗░░██╗░██████╗░███████╗░█████╗░███╗░░██╗
// ██╔══██╗██║░░░██║████╗░██║██╔════╝░██╔════╝██╔══██╗████╗░██║
// ██║░░██║██║░░░██║██╔██╗██║██║░░██╗░█████╗░░██║░░██║██╔██╗██║
// ██║░░██║██║░░░██║██║╚████║██║░░╚██╗██╔══╝░░██║░░██║██║╚████║
// ██████╔╝╚██████╔╝██║░╚███║╚██████╔╝███████╗╚█████╔╝██║░╚███║
// ╚═════╝░░╚═════╝░╚═╝░░╚══╝░╚═════╝░╚══════╝░╚════╝░╚═╝░░╚══╝
//

contract DoomskullDungeon is SkullDungeon {
    /// ============ Immutable storage ============
    ///
    uint256 public constant DOOMSKULL_MAX_SUPPLY = 666;

    uint256 public constant DOOMSKULL_START_ID = 10000;

    string internal DOOMSKULL_PROVENANCE_HASH;

    /// ============ Mutable storage ============
    ///
    bool public doomskullBreedingActive;
    uint256 public doomskullTokenCounter;

    bool public doomskullMetadataFinalised;
    string internal _doomskullPlaceholderURI;
    mapping(uint256 => string) internal _doomskullCIDs;

    mapping(address => bool) internal _authorised;
    address[] public authorisedLog;

    /// ============ Modifiers ============
    ///
    modifier onlyAuthorised() {
        require(_authorised[_msgSender()], "The sender is not authorised");
        _;
    }

    constructor(
        address signer,
        string memory baseURI,
        address vrfCoordinator,
        address linkToken,
        bytes32 keyHash,
        uint256 linkFee
    ) SkullDungeon(signer, baseURI, vrfCoordinator, linkToken, keyHash, linkFee) {
        require(MAX_SUPPLY <= DOOMSKULL_START_ID);
        doomskullBreedingActive = false;
        doomskullTokenCounter = 0;

        doomskullMetadataFinalised = false;
        _doomskullPlaceholderURI = baseURI;
    }

    function breed(uint256 tokenId) external onlyAuthorised nonReentrant returns (uint256) {
        require(doomskullBreedingActive, "Doomskull breeding not active");
        require(doomskullTokenCounter < DOOMSKULL_MAX_SUPPLY, "Doomskull max supply exceeded");
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
        require(ownerOf(tokenId) == _msgSender(), "Not the owner");

        uint256 newTokenID = DOOMSKULL_START_ID + doomskullTokenCounter;
        _burn(tokenId);
        _safeMint(_msgSender(), newTokenID);
        doomskullTokenCounter++;
        return newTokenID;
    }

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        if (tokenId < DOOMSKULL_START_ID) {
            return super.tokenURI(tokenId);
        }
        if (bytes(_doomskullCIDs[tokenId]).length > 0) {
            return string(abi.encodePacked("ipfs://", _doomskullCIDs[tokenId]));
        }
        return _doomskullPlaceholderURI;
    }

    function doomskullProvenanceHash() public view returns (string memory) {
        require(
            bytes(DOOMSKULL_PROVENANCE_HASH).length != 0,
            "Doomskull provenance hash is not set"
        );
        return DOOMSKULL_PROVENANCE_HASH;
    }

    /// ============ ADMIN functions ============

    function setDoomskullBreedingActive(bool active) public onlyOwner {
        doomskullBreedingActive = active;
    }

    function finaliseDoomskullMetadata() public onlyOwner {
        require(!doomskullMetadataFinalised, "Doomskull metadata already finalised");
        doomskullMetadataFinalised = true;
    }

    function setDoomskullPlaceholderURI(string memory placeholderURI) public onlyOwner {
        _doomskullPlaceholderURI = placeholderURI;
    }

    function setDoomskullCID(uint256 tokenId, string memory tokenCID) public onlyOwner {
        require(!doomskullMetadataFinalised, "Doomskull metadata already finalised");
        _doomskullCIDs[tokenId] = tokenCID;
    }

    function setDoomskullCIDs(uint256[] memory tokenIds, string[] memory tokenCIDs)
        public
        onlyOwner
    {
        require(!doomskullMetadataFinalised, "Doomskull metadata already finalised");
        require(tokenIds.length == tokenCIDs.length, "Arrays of different sizes");
        require(tokenIds.length <= 100, "Max 100 token IDs");
        for (uint256 i = 0; i < tokenIds.length; i++) {
            _doomskullCIDs[tokenIds[i]] = tokenCIDs[i];
        }
    }

    function setDoomskullProvenanceHash(string memory _provenanceHash) public onlyOwner {
        require(
            bytes(DOOMSKULL_PROVENANCE_HASH).length == 0,
            "Doomskull provenance hash is already set"
        );
        DOOMSKULL_PROVENANCE_HASH = _provenanceHash;
    }

    function authorise(address toAuth) public onlyOwner {
        _authorised[toAuth] = true;
        authorisedLog.push(toAuth);
    }

    function unauthorise(address toUnauth) public onlyOwner {
        _authorised[toUnauth] = false;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface LinkTokenInterface {
  function allowance(address owner, address spender) external view returns (uint256 remaining);

  function approve(address spender, uint256 value) external returns (bool success);

  function balanceOf(address owner) external view returns (uint256 balance);

  function decimals() external view returns (uint8 decimalPlaces);

  function decreaseApproval(address spender, uint256 addedValue) external returns (bool success);

  function increaseApproval(address spender, uint256 subtractedValue) external;

  function name() external view returns (string memory tokenName);

  function symbol() external view returns (string memory tokenSymbol);

  function totalSupply() external view returns (uint256 totalTokensIssued);

  function transfer(address to, uint256 value) external returns (bool success);

  function transferAndCall(
    address to,
    uint256 value,
    bytes calldata data
  ) external returns (bool success);

  function transferFrom(
    address from,
    address to,
    uint256 value
  ) external returns (bool success);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@chainlink/contracts/src/v0.8/VRFConsumerBase.sol";

//
// ░██████╗██╗░░██╗██╗░░░██╗██╗░░░░░██╗░░░░░
// ██╔════╝██║░██╔╝██║░░░██║██║░░░░░██║░░░░░
// ╚█████╗░█████═╝░██║░░░██║██║░░░░░██║░░░░░
// ░╚═══██╗██╔═██╗░██║░░░██║██║░░░░░██║░░░░░
// ██████╔╝██║░╚██╗╚██████╔╝███████╗███████╗
// ╚═════╝░╚═╝░░╚═╝░╚═════╝░╚══════╝╚══════╝
//
// ██████╗░██╗░░░██╗███╗░░██╗░██████╗░███████╗░█████╗░███╗░░██╗
// ██╔══██╗██║░░░██║████╗░██║██╔════╝░██╔════╝██╔══██╗████╗░██║
// ██║░░██║██║░░░██║██╔██╗██║██║░░██╗░█████╗░░██║░░██║██╔██╗██║
// ██║░░██║██║░░░██║██║╚████║██║░░╚██╗██╔══╝░░██║░░██║██║╚████║
// ██████╔╝╚██████╔╝██║░╚███║╚██████╔╝███████╗╚█████╔╝██║░╚███║
// ╚═════╝░░╚═════╝░╚═╝░░╚══╝░╚═════╝░╚══════╝░╚════╝░╚═╝░░╚══╝
//

contract SkullDungeon is ERC721, Pausable, Ownable, ReentrancyGuard, VRFConsumerBase {
    using Strings for uint256;
    using ECDSA for bytes32;

    /// ============ Structs / Enums ============
    ///
    enum SaleState {
        NotStarted,
        WhitelistOnly,
        Regular
    }

    /// ============ Immutable storage ============
    ///
    uint256 public constant MAX_SUPPLY = 3777;

    uint256 public constant RESERVED_SUPPLY = 66;

    uint256 public constant WHITELIST_TIER1 = 1;

    uint256 public constant WHITELIST_TIER2 = 2;

    bytes32 internal immutable LINK_KEY_HASH;

    uint256 internal immutable LINK_FEE;

    uint256 internal TOKEN_OFFSET;

    string internal PROVENANCE_HASH;

    /// ============ Mutable storage ============
    ///
    address public signerAddress;

    string internal metadataBaseURI;
    bool public metadataRevealed;
    bool public metadataFinalised;

    SaleState public saleState;

    uint256 public regularPrice;
    uint256 public whitelistPrice;

    uint256 public regularMaxPerTransaction;
    uint256 public whitelistTier1MaxPerWallet;
    uint256 public whitelistTier2MaxPerWallet;

    mapping(address => uint256) private _whitelistMintedPerAddress;

    uint256 public tokenCounter;

    /// ============ Events ============
    ///
    event MetadataBaseURIUpdated(string oldBaseURI, string newBaseURI);

    constructor(
        address signer,
        string memory baseURI,
        address vrfCoordinator,
        address linkToken,
        bytes32 keyHash,
        uint256 linkFee
    ) ERC721("Skull Dungeon", "SXD") VRFConsumerBase(vrfCoordinator, linkToken) {
        LINK_KEY_HASH = keyHash;
        LINK_FEE = linkFee;

        signerAddress = signer;
        metadataBaseURI = baseURI;
        metadataRevealed = false;
        metadataFinalised = false;

        saleState = SaleState.NotStarted;

        regularPrice = 0.079 ether;
        whitelistPrice = 0.069 ether;

        regularMaxPerTransaction = 2;
        whitelistTier1MaxPerWallet = 3;
        whitelistTier2MaxPerWallet = 2;

        tokenCounter = 0;

        ownerMint(RESERVED_SUPPLY);
    }

    function mint(uint256 numTokens) public payable nonReentrant {
        require(saleState == SaleState.Regular, "Regular sale not active");
        require(
            numTokens > 0 && numTokens <= regularMaxPerTransaction,
            "Incorrect number of tokens requested"
        );
        require(tokenCounter + numTokens <= MAX_SUPPLY, "Max supply exceeded");
        require(numTokens * regularPrice == msg.value, "Incorrect ETH sent");

        for (uint256 i = 0; i < numTokens; i++) {
            _safeMint(_msgSender(), tokenCounter);
            tokenCounter++;
        }
    }

    function whitelistMint(
        uint256 numTokens,
        uint256 tier,
        bytes calldata signature
    ) public payable nonReentrant {
        require(saleState == SaleState.WhitelistOnly, "Whitelist sale not active");
        require(numTokens > 0, "Incorrect number of tokens requested");
        require(tokenCounter + numTokens <= MAX_SUPPLY, "Max supply exceeded");
        require(numTokens * whitelistPrice == msg.value, "Incorrect ETH sent");

        require(_validateSignature(signature, tier, _msgSender()), "Wallet not whitelisted");
        uint256 maxPerWallet = whitelistMaxPerWallet(tier);
        require(
            _whitelistMintedPerAddress[_msgSender()] + numTokens <= maxPerWallet,
            "Max tokens per wallet exceeded"
        );
        _whitelistMintedPerAddress[_msgSender()] += numTokens;

        for (uint256 i = 0; i < numTokens; i++) {
            _safeMint(_msgSender(), tokenCounter);
            tokenCounter++;
        }
    }

    function whitelistMaxPerWallet(uint256 tier) public view returns (uint256) {
        require(tier == WHITELIST_TIER1 || tier == WHITELIST_TIER2, "Unknown whitelist tier");
        return tier == WHITELIST_TIER1 ? whitelistTier1MaxPerWallet : whitelistTier2MaxPerWallet;
    }

    function isWhitelisted(
        bytes calldata signature,
        uint256 tier,
        address caller
    ) public view returns (bool) {
        return _validateSignature(signature, tier, caller);
    }

    function _validateSignature(
        bytes calldata signature,
        uint256 tier,
        address caller
    ) internal view returns (bool) {
        bytes32 dataHash = keccak256(abi.encodePacked(tier, caller));
        bytes32 message = ECDSA.toEthSignedMessageHash(dataHash);

        address receivedAddress = ECDSA.recover(message, signature);
        return (receivedAddress != address(0) && receivedAddress == signerAddress);
    }

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        if (!metadataRevealed) return metadataBaseURI;
        return string(abi.encodePacked(metadataBaseURI, tokenId.toString()));
    }

    function tokenOffset() public view returns (uint256) {
        require(TOKEN_OFFSET != 0, "Offset is not set");
        return TOKEN_OFFSET;
    }

    function provenanceHash() public view returns (string memory) {
        require(bytes(PROVENANCE_HASH).length != 0, "Provenance hash is not set");
        return PROVENANCE_HASH;
    }

    /// ============ ADMIN functions ============

    function ownerMint(uint256 numTokens) public onlyOwner {
        require(numTokens > 0, "Incorrect number of tokens requested");
        require(tokenCounter + numTokens <= MAX_SUPPLY, "Max supply exceeded");

        for (uint256 i = 0; i < numTokens; i++) {
            _safeMint(_msgSender(), tokenCounter);
            tokenCounter++;
        }
    }

    function setSignerAddress(address signer) public onlyOwner {
        require(signer != address(0), "Signer address cannot be 0");
        signerAddress = signer;
    }

    function startRegularSale() public onlyOwner {
        require(saleState != SaleState.Regular, "Regular sale already active");
        saleState = SaleState.Regular;
    }

    function startWhitelistSale() public onlyOwner {
        require(saleState != SaleState.WhitelistOnly, "Whitelist sale already active");
        saleState = SaleState.WhitelistOnly;
    }

    function setRegularPrice(uint256 price) public onlyOwner {
        regularPrice = price;
    }

    function setWhitelistPrice(uint256 price) public onlyOwner {
        whitelistPrice = price;
    }

    function setRegularMaxPerTransaction(uint256 limit) public onlyOwner {
        regularMaxPerTransaction = limit;
    }

    function setWhitelistTier1MaxPerWallet(uint256 limit) public onlyOwner {
        whitelistTier1MaxPerWallet = limit;
    }

    function setWhitelistTier2MaxPerWallet(uint256 limit) public onlyOwner {
        whitelistTier2MaxPerWallet = limit;
    }

    function setTokenOffset() public onlyOwner {
        require(TOKEN_OFFSET == 0, "Offset is already set");
        require(LINK.balanceOf(address(this)) >= LINK_FEE, "Not enough LINK");
        provenanceHash();

        requestRandomness(LINK_KEY_HASH, LINK_FEE);
    }

    function fulfillRandomness(bytes32, uint256 randomness) internal override {
        TOKEN_OFFSET = randomness % (MAX_SUPPLY - RESERVED_SUPPLY);
    }

    function setProvenanceHash(string memory _provenanceHash) public onlyOwner {
        require(bytes(PROVENANCE_HASH).length == 0, "Provenance hash is already set");
        PROVENANCE_HASH = _provenanceHash;
    }

    function pause() public onlyOwner {
        _pause();
    }

    function unpause() public onlyOwner {
        _unpause();
    }

    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal override whenNotPaused {
        super._beforeTokenTransfer(from, to, tokenId);
    }

    function revealMetadata() public onlyOwner {
        require(!metadataRevealed, "Metadata already revealed");
        metadataRevealed = true;
    }

    function finaliseMetadata() public onlyOwner {
        require(metadataRevealed, "Metadata not revealed");
        require(!metadataFinalised, "Metadata already finalised");
        metadataFinalised = true;
    }

    function setBaseURI(string memory baseURI) public onlyOwner {
        require(!metadataFinalised, "Metadata already finalised");
        string memory oldBaseURI = metadataBaseURI;
        metadataBaseURI = baseURI;
        emit MetadataBaseURIUpdated(oldBaseURI, baseURI);
    }

    function withdraw() external onlyOwner {
        uint256 balance = address(this).balance;
        Address.sendValue(payable(_msgSender()), balance);
    }

    function withdrawLINK(uint256 amount) external onlyOwner {
        LINK.transfer(_msgSender(), amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "./interfaces/LinkTokenInterface.sol";

import "./VRFRequestIDBase.sol";

/** ****************************************************************************
 * @notice Interface for contracts using VRF randomness
 * *****************************************************************************
 * @dev PURPOSE
 *
 * @dev Reggie the Random Oracle (not his real job) wants to provide randomness
 * @dev to Vera the verifier in such a way that Vera can be sure he's not
 * @dev making his output up to suit himself. Reggie provides Vera a public key
 * @dev to which he knows the secret key. Each time Vera provides a seed to
 * @dev Reggie, he gives back a value which is computed completely
 * @dev deterministically from the seed and the secret key.
 *
 * @dev Reggie provides a proof by which Vera can verify that the output was
 * @dev correctly computed once Reggie tells it to her, but without that proof,
 * @dev the output is indistinguishable to her from a uniform random sample
 * @dev from the output space.
 *
 * @dev The purpose of this contract is to make it easy for unrelated contracts
 * @dev to talk to Vera the verifier about the work Reggie is doing, to provide
 * @dev simple access to a verifiable source of randomness.
 * *****************************************************************************
 * @dev USAGE
 *
 * @dev Calling contracts must inherit from VRFConsumerBase, and can
 * @dev initialize VRFConsumerBase's attributes in their constructor as
 * @dev shown:
 *
 * @dev   contract VRFConsumer {
 * @dev     constructor(<other arguments>, address _vrfCoordinator, address _link)
 * @dev       VRFConsumerBase(_vrfCoordinator, _link) public {
 * @dev         <initialization with other arguments goes here>
 * @dev       }
 * @dev   }
 *
 * @dev The oracle will have given you an ID for the VRF keypair they have
 * @dev committed to (let's call it keyHash), and have told you the minimum LINK
 * @dev price for VRF service. Make sure your contract has sufficient LINK, and
 * @dev call requestRandomness(keyHash, fee, seed), where seed is the input you
 * @dev want to generate randomness from.
 *
 * @dev Once the VRFCoordinator has received and validated the oracle's response
 * @dev to your request, it will call your contract's fulfillRandomness method.
 *
 * @dev The randomness argument to fulfillRandomness is the actual random value
 * @dev generated from your seed.
 *
 * @dev The requestId argument is generated from the keyHash and the seed by
 * @dev makeRequestId(keyHash, seed). If your contract could have concurrent
 * @dev requests open, you can use the requestId to track which seed is
 * @dev associated with which randomness. See VRFRequestIDBase.sol for more
 * @dev details. (See "SECURITY CONSIDERATIONS" for principles to keep in mind,
 * @dev if your contract could have multiple requests in flight simultaneously.)
 *
 * @dev Colliding `requestId`s are cryptographically impossible as long as seeds
 * @dev differ. (Which is critical to making unpredictable randomness! See the
 * @dev next section.)
 *
 * *****************************************************************************
 * @dev SECURITY CONSIDERATIONS
 *
 * @dev A method with the ability to call your fulfillRandomness method directly
 * @dev could spoof a VRF response with any random value, so it's critical that
 * @dev it cannot be directly called by anything other than this base contract
 * @dev (specifically, by the VRFConsumerBase.rawFulfillRandomness method).
 *
 * @dev For your users to trust that your contract's random behavior is free
 * @dev from malicious interference, it's best if you can write it so that all
 * @dev behaviors implied by a VRF response are executed *during* your
 * @dev fulfillRandomness method. If your contract must store the response (or
 * @dev anything derived from it) and use it later, you must ensure that any
 * @dev user-significant behavior which depends on that stored value cannot be
 * @dev manipulated by a subsequent VRF request.
 *
 * @dev Similarly, both miners and the VRF oracle itself have some influence
 * @dev over the order in which VRF responses appear on the blockchain, so if
 * @dev your contract could have multiple VRF requests in flight simultaneously,
 * @dev you must ensure that the order in which the VRF responses arrive cannot
 * @dev be used to manipulate your contract's user-significant behavior.
 *
 * @dev Since the ultimate input to the VRF is mixed with the block hash of the
 * @dev block in which the request is made, user-provided seeds have no impact
 * @dev on its economic security properties. They are only included for API
 * @dev compatability with previous versions of this contract.
 *
 * @dev Since the block hash of the block which contains the requestRandomness
 * @dev call is mixed into the input to the VRF *last*, a sufficiently powerful
 * @dev miner could, in principle, fork the blockchain to evict the block
 * @dev containing the request, forcing the request to be included in a
 * @dev different block with a different hash, and therefore a different input
 * @dev to the VRF. However, such an attack would incur a substantial economic
 * @dev cost. This cost scales with the number of blocks the VRF oracle waits
 * @dev until it calls responds to a request.
 */
abstract contract VRFConsumerBase is VRFRequestIDBase {
  /**
   * @notice fulfillRandomness handles the VRF response. Your contract must
   * @notice implement it. See "SECURITY CONSIDERATIONS" above for important
   * @notice principles to keep in mind when implementing your fulfillRandomness
   * @notice method.
   *
   * @dev VRFConsumerBase expects its subcontracts to have a method with this
   * @dev signature, and will call it once it has verified the proof
   * @dev associated with the randomness. (It is triggered via a call to
   * @dev rawFulfillRandomness, below.)
   *
   * @param requestId The Id initially returned by requestRandomness
   * @param randomness the VRF output
   */
  function fulfillRandomness(bytes32 requestId, uint256 randomness) internal virtual;

  /**
   * @dev In order to keep backwards compatibility we have kept the user
   * seed field around. We remove the use of it because given that the blockhash
   * enters later, it overrides whatever randomness the used seed provides.
   * Given that it adds no security, and can easily lead to misunderstandings,
   * we have removed it from usage and can now provide a simpler API.
   */
  uint256 private constant USER_SEED_PLACEHOLDER = 0;

  /**
   * @notice requestRandomness initiates a request for VRF output given _seed
   *
   * @dev The fulfillRandomness method receives the output, once it's provided
   * @dev by the Oracle, and verified by the vrfCoordinator.
   *
   * @dev The _keyHash must already be registered with the VRFCoordinator, and
   * @dev the _fee must exceed the fee specified during registration of the
   * @dev _keyHash.
   *
   * @dev The _seed parameter is vestigial, and is kept only for API
   * @dev compatibility with older versions. It can't *hurt* to mix in some of
   * @dev your own randomness, here, but it's not necessary because the VRF
   * @dev oracle will mix the hash of the block containing your request into the
   * @dev VRF seed it ultimately uses.
   *
   * @param _keyHash ID of public key against which randomness is generated
   * @param _fee The amount of LINK to send with the request
   *
   * @return requestId unique ID for this request
   *
   * @dev The returned requestId can be used to distinguish responses to
   * @dev concurrent requests. It is passed as the first argument to
   * @dev fulfillRandomness.
   */
  function requestRandomness(bytes32 _keyHash, uint256 _fee) internal returns (bytes32 requestId) {
    LINK.transferAndCall(vrfCoordinator, _fee, abi.encode(_keyHash, USER_SEED_PLACEHOLDER));
    // This is the seed passed to VRFCoordinator. The oracle will mix this with
    // the hash of the block containing this request to obtain the seed/input
    // which is finally passed to the VRF cryptographic machinery.
    uint256 vRFSeed = makeVRFInputSeed(_keyHash, USER_SEED_PLACEHOLDER, address(this), nonces[_keyHash]);
    // nonces[_keyHash] must stay in sync with
    // VRFCoordinator.nonces[_keyHash][this], which was incremented by the above
    // successful LINK.transferAndCall (in VRFCoordinator.randomnessRequest).
    // This provides protection against the user repeating their input seed,
    // which would result in a predictable/duplicate output, if multiple such
    // requests appeared in the same block.
    nonces[_keyHash] = nonces[_keyHash] + 1;
    return makeRequestId(_keyHash, vRFSeed);
  }

  LinkTokenInterface internal immutable LINK;
  address private immutable vrfCoordinator;

  // Nonces for each VRF key from which randomness has been requested.
  //
  // Must stay in sync with VRFCoordinator[_keyHash][this]
  mapping(bytes32 => uint256) /* keyHash */ /* nonce */
    private nonces;

  /**
   * @param _vrfCoordinator address of VRFCoordinator contract
   * @param _link address of LINK token contract
   *
   * @dev https://docs.chain.link/docs/link-token-contracts
   */
  constructor(address _vrfCoordinator, address _link) {
    vrfCoordinator = _vrfCoordinator;
    LINK = LinkTokenInterface(_link);
  }

  // rawFulfillRandomness is called by VRFCoordinator when it receives a valid VRF
  // proof. rawFulfillRandomness then calls fulfillRandomness, after validating
  // the origin of the call
  function rawFulfillRandomness(bytes32 requestId, uint256 randomness) external {
    require(msg.sender == vrfCoordinator, "Only VRFCoordinator can fulfill");
    fulfillRandomness(requestId, randomness);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

contract VRFRequestIDBase {
  /**
   * @notice returns the seed which is actually input to the VRF coordinator
   *
   * @dev To prevent repetition of VRF output due to repetition of the
   * @dev user-supplied seed, that seed is combined in a hash with the
   * @dev user-specific nonce, and the address of the consuming contract. The
   * @dev risk of repetition is mostly mitigated by inclusion of a blockhash in
   * @dev the final seed, but the nonce does protect against repetition in
   * @dev requests which are included in a single block.
   *
   * @param _userSeed VRF seed input provided by user
   * @param _requester Address of the requesting contract
   * @param _nonce User-specific nonce at the time of the request
   */
  function makeVRFInputSeed(
    bytes32 _keyHash,
    uint256 _userSeed,
    address _requester,
    uint256 _nonce
  ) internal pure returns (uint256) {
    return uint256(keccak256(abi.encode(_keyHash, _userSeed, _requester, _nonce)));
  }

  /**
   * @notice Returns the id for this request
   * @param _keyHash The serviceAgreement ID to be used for this request
   * @param _vRFInputSeed The seed to be passed directly to the VRF
   * @return The id for this request
   *
   * @dev Note that _vRFInputSeed is not the seed passed by the consuming
   * @dev contract, but the one generated by makeVRFInputSeed
   */
  function makeRequestId(bytes32 _keyHash, uint256 _vRFInputSeed) internal pure returns (bytes32) {
    return keccak256(abi.encodePacked(_keyHash, _vRFInputSeed));
  }
}

{
  "compilationTarget": {
    "contracts/DoomskullDungeon.sol": "DoomskullDungeon"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": []
}