// Sources flattened with hardhat v2.1.1 https://hardhat.org

// File @openzeppelin/contracts/math/Math.sol@v3.4.1

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}


// File @openzeppelin/contracts/utils/ReentrancyGuard.sol@v3.4.1

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}


// File @openzeppelin/contracts/utils/Address.sol@v3.4.1

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v3.4.1

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/math/SafeMath.sol@v3.4.1

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// File @openzeppelin/contracts/token/ERC20/SafeERC20.sol@v3.4.1

pragma solidity >=0.6.0 <0.8.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File contracts/libraries/FixedPointMath.sol

pragma solidity ^0.6.12;

library FixedPointMath {
  uint256 public constant DECIMALS = 18;
  uint256 public constant SCALAR = 10**DECIMALS;

  struct uq192x64 {
    uint256 x;
  }

  function fromU256(uint256 value) internal pure returns (uq192x64 memory) {
    uint256 x;
    require(value == 0 || (x = value * SCALAR) / SCALAR == value);
    return uq192x64(x);
  }

  function maximumValue() internal pure returns (uq192x64 memory) {
    return uq192x64(uint256(-1));
  }

  function add(uq192x64 memory self, uq192x64 memory value) internal pure returns (uq192x64 memory) {
    uint256 x;
    require((x = self.x + value.x) >= self.x);
    return uq192x64(x);
  }

  function add(uq192x64 memory self, uint256 value) internal pure returns (uq192x64 memory) {
    return add(self, fromU256(value));
  }

  function sub(uq192x64 memory self, uq192x64 memory value) internal pure returns (uq192x64 memory) {
    uint256 x;
    require((x = self.x - value.x) <= self.x);
    return uq192x64(x);
  }

  function sub(uq192x64 memory self, uint256 value) internal pure returns (uq192x64 memory) {
    return sub(self, fromU256(value));
  }

  function mul(uq192x64 memory self, uint256 value) internal pure returns (uq192x64 memory) {
    uint256 x;
    require(value == 0 || (x = self.x * value) / value == self.x);
    return uq192x64(x);
  }

  function div(uq192x64 memory self, uint256 value) internal pure returns (uq192x64 memory) {
    require(value != 0);
    return uq192x64(self.x / value);
  }

  function cmp(uq192x64 memory self, uq192x64 memory value) internal pure returns (int256) {
    if (self.x < value.x) {
      return -1;
    }

    if (self.x > value.x) {
      return 1;
    }

    return 0;
  }

  function decode(uq192x64 memory self) internal pure returns (uint256) {
    return self.x / SCALAR;
  }
}


// File contracts/interfaces/IDetailedERC20.sol

pragma solidity ^0.6.12;

interface IDetailedERC20 is IERC20 {
  function name() external returns (string memory);
  function symbol() external returns (string memory);
  function decimals() external returns (uint8);
}


// File hardhat/console.sol@v2.1.1

pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
	}

	function logUint(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
	}

	function log(uint p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
	}

	function log(uint p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
	}

	function log(uint p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
	}

	function log(string memory p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
	}

	function log(uint p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
	}

	function log(uint p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
	}

	function log(uint p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
	}

	function log(uint p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
	}

	function log(uint p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
	}

	function log(uint p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
	}

	function log(uint p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
	}

	function log(uint p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
	}

	function log(uint p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
	}

	function log(uint p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
	}

	function log(uint p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
	}

	function log(bool p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
	}

	function log(bool p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
	}

	function log(bool p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
	}

	function log(address p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
	}

	function log(address p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
	}

	function log(address p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}


// File contracts/libraries/alchemist/CDP.sol

pragma solidity ^0.6.12;





/// @title CDP
///
/// @dev A library which provides the CDP data struct and associated functions.
library CDP {
  using CDP for Data;
  using FixedPointMath for FixedPointMath.uq192x64;
  using SafeERC20 for IDetailedERC20;
  using SafeMath for uint256;

  struct Context {
    FixedPointMath.uq192x64 collateralizationLimit;
    FixedPointMath.uq192x64 accumulatedYieldWeight;
  }

  struct Data {
    uint256 totalDeposited;
    uint256 totalDebt;
    uint256 totalCredit;
    uint256 lastDeposit;
    FixedPointMath.uq192x64 lastAccumulatedYieldWeight;
  }

  function update(Data storage _self, Context storage _ctx) internal {
    uint256 _earnedYield = _self.getEarnedYield(_ctx);
    if (_earnedYield > _self.totalDebt) {
      uint256 _currentTotalDebt = _self.totalDebt;
      _self.totalDebt = 0;
      _self.totalCredit = _earnedYield.sub(_currentTotalDebt);
    } else {
      _self.totalDebt = _self.totalDebt.sub(_earnedYield);
    }
    _self.lastAccumulatedYieldWeight = _ctx.accumulatedYieldWeight;
  }

  /// @dev Assures that the CDP is healthy.
  ///
  /// This function will revert if the CDP is unhealthy.
  function checkHealth(Data storage _self, Context storage _ctx, string memory _msg) internal view {
    require(_self.isHealthy(_ctx), _msg);
  }

  /// @dev Gets if the CDP is considered healthy.
  ///
  /// A CDP is healthy if its collateralization ratio is greater than the global collateralization limit.
  ///
  /// @return if the CDP is healthy.
  function isHealthy(Data storage _self, Context storage _ctx) internal view returns (bool) {
    return _ctx.collateralizationLimit.cmp(_self.getCollateralizationRatio(_ctx)) <= 0;
  }

  function getUpdatedTotalDebt(Data storage _self, Context storage _ctx) internal view returns (uint256) {
    uint256 _unclaimedYield = _self.getEarnedYield(_ctx);
    if (_unclaimedYield == 0) {
      return _self.totalDebt;
    }

    uint256 _currentTotalDebt = _self.totalDebt;
    if (_unclaimedYield >= _currentTotalDebt) {
      return 0;
    }

    return _currentTotalDebt - _unclaimedYield;
  }

  function getUpdatedTotalCredit(Data storage _self, Context storage _ctx) internal view returns (uint256) {
    uint256 _unclaimedYield = _self.getEarnedYield(_ctx);
    if (_unclaimedYield == 0) {
      return _self.totalCredit;
    }

    uint256 _currentTotalDebt = _self.totalDebt;
    if (_unclaimedYield <= _currentTotalDebt) {
      return 0;
    }

    return _self.totalCredit + (_unclaimedYield - _currentTotalDebt);
  }

  /// @dev Gets the amount of yield that a CDP has earned since the last time it was updated.
  ///
  /// @param _self the CDP to query.
  /// @param _ctx  the CDP context.
  ///
  /// @return the amount of earned yield.
  function getEarnedYield(Data storage _self, Context storage _ctx) internal view returns (uint256) {
    FixedPointMath.uq192x64 memory _currentAccumulatedYieldWeight = _ctx.accumulatedYieldWeight;
    FixedPointMath.uq192x64 memory _lastAccumulatedYieldWeight = _self.lastAccumulatedYieldWeight;

    if (_currentAccumulatedYieldWeight.cmp(_lastAccumulatedYieldWeight) == 0) {
      return 0;
    }

    return _currentAccumulatedYieldWeight
      .sub(_lastAccumulatedYieldWeight)
      .mul(_self.totalDeposited)
      .decode();
  }

  /// @dev Gets a CDPs collateralization ratio.
  ///
  /// The collateralization ratio is defined as the ratio of collateral to debt. If the CDP has zero debt then this
  /// will return the maximum value of a fixed point integer.
  ///
  /// This function will use the updated total debt so an update before calling this function is not required.
  ///
  /// @param _self the CDP to query.
  ///
  /// @return a fixed point integer representing the collateralization ratio.
  function getCollateralizationRatio(Data storage _self, Context storage _ctx)
    internal view
    returns (FixedPointMath.uq192x64 memory)
  {
    uint256 _totalDebt = _self.getUpdatedTotalDebt(_ctx);
    if (_totalDebt == 0) {
      return FixedPointMath.maximumValue();
    }
    return FixedPointMath.fromU256(_self.totalDeposited).div(_totalDebt);
  }
}


// File contracts/interfaces/ITransmuter.sol

pragma solidity ^0.6.12;

interface ITransmuter  {
  function distribute (address origin, uint256 amount) external;
}


// File contracts/interfaces/IMintableERC20.sol

pragma solidity ^0.6.12;

interface IMintableERC20 is IDetailedERC20{
  function mint(address _recipient, uint256 _amount) external;
  function burnFrom(address account, uint256 amount) external;
  function lowerHasMinted(uint256 amount)external;
}


// File contracts/interfaces/IChainlink.sol

pragma solidity ^0.6.12;

interface IChainlink {
  function latestAnswer() external view returns (int256);
}


// File contracts/interfaces/IVaultAdapter.sol

pragma solidity ^0.6.12;

/// Interface for all Vault Adapter implementations.
interface IVaultAdapter {

  /// @dev Gets the token that the adapter accepts.
  function token() external view returns (IDetailedERC20);

  /// @dev The total value of the assets deposited into the vault.
  function totalValue() external view returns (uint256);

  /// @dev Deposits funds into the vault.
  ///
  /// @param _amount  the amount of funds to deposit.
  function deposit(uint256 _amount) external;

  /// @dev Attempts to withdraw funds from the wrapped vault.
  ///
  /// The amount withdrawn to the recipient may be less than the amount requested.
  ///
  /// @param _recipient the recipient of the funds.
  /// @param _amount    the amount of funds to withdraw.
  function withdraw(address _recipient, uint256 _amount) external;
}


// File contracts/libraries/alchemist/Vault.sol

pragma solidity ^0.6.12;

//import "hardhat/console.sol";






/// @title Pool
///
/// @dev A library which provides the Vault data struct and associated functions.
library Vault {
  using Vault for Data;
  using Vault for List;
  using SafeERC20 for IDetailedERC20;
  using SafeMath for uint256;

  struct Data {
    IVaultAdapter adapter;
    uint256 totalDeposited;
  }

  struct List {
    Data[] elements;
  }

  /// @dev Gets the total amount of assets deposited in the vault.
  ///
  /// @return the total assets.
  function totalValue(Data storage _self) internal view returns (uint256) {
    return _self.adapter.totalValue();
  }

  /// @dev Gets the token that the vault accepts.
  ///
  /// @return the accepted token.
  function token(Data storage _self) internal view returns (IDetailedERC20) {
    return IDetailedERC20(_self.adapter.token());
  }

  /// @dev Deposits funds from the caller into the vault.
  ///
  /// @param _amount the amount of funds to deposit.
  function deposit(Data storage _self, uint256 _amount) internal returns (uint256) {
    // Push the token that the vault accepts onto the stack to save gas.
    IDetailedERC20 _token = _self.token();

    _token.safeTransfer(address(_self.adapter), _amount);
    _self.adapter.deposit(_amount);
    _self.totalDeposited = _self.totalDeposited.add(_amount);

    return _amount;
  }

  /// @dev Deposits the entire token balance of the caller into the vault.
  function depositAll(Data storage _self) internal returns (uint256) {
    IDetailedERC20 _token = _self.token();
    return _self.deposit(_token.balanceOf(address(this)));
  }

  /// @dev Withdraw deposited funds from the vault.
  ///
  /// @param _recipient the account to withdraw the tokens to.
  /// @param _amount    the amount of tokens to withdraw.
  function withdraw(Data storage _self, address _recipient, uint256 _amount) internal returns (uint256, uint256) {
    (uint256 _withdrawnAmount, uint256 _decreasedValue) = _self.directWithdraw(_recipient, _amount);
    _self.totalDeposited = _self.totalDeposited.sub(_decreasedValue);
    return (_withdrawnAmount, _decreasedValue);
  }

  /// @dev Directly withdraw deposited funds from the vault.
  ///
  /// @param _recipient the account to withdraw the tokens to.
  /// @param _amount    the amount of tokens to withdraw.
  function directWithdraw(Data storage _self, address _recipient, uint256 _amount) internal returns (uint256, uint256) {
    IDetailedERC20 _token = _self.token();

    uint256 _startingBalance = _token.balanceOf(_recipient);
    uint256 _startingTotalValue = _self.totalValue();

    _self.adapter.withdraw(_recipient, _amount);

    uint256 _endingBalance = _token.balanceOf(_recipient);
    uint256 _withdrawnAmount = _endingBalance.sub(_startingBalance);

    uint256 _endingTotalValue = _self.totalValue();
    uint256 _decreasedValue = _startingTotalValue.sub(_endingTotalValue);

    return (_withdrawnAmount, _decreasedValue);
  }

  /// @dev Withdraw all the deposited funds from the vault.
  ///
  /// @param _recipient the account to withdraw the tokens to.
  function withdrawAll(Data storage _self, address _recipient) internal returns (uint256, uint256) {
    return _self.withdraw(_recipient, _self.totalDeposited);
  }

  /// @dev Harvests yield from the vault.
  ///
  /// @param _recipient the account to withdraw the harvested yield to.
  function harvest(Data storage _self, address _recipient) internal returns (uint256, uint256) {
    if (_self.totalValue() <= _self.totalDeposited) {
      return (0, 0);
    }
    uint256 _withdrawAmount = _self.totalValue().sub(_self.totalDeposited);
    return _self.directWithdraw(_recipient, _withdrawAmount);
  }

  /// @dev Adds a element to the list.
  ///
  /// @param _element the element to add.
  function push(List storage _self, Data memory _element) internal {
    _self.elements.push(_element);
  }

  /// @dev Gets a element from the list.
  ///
  /// @param _index the index in the list.
  ///
  /// @return the element at the specified index.
  function get(List storage _self, uint256 _index) internal view returns (Data storage) {
    return _self.elements[_index];
  }

  /// @dev Gets the last element in the list.
  ///
  /// This function will revert if there are no elements in the list.
  ///
  /// @return the last element in the list.
  function last(List storage _self) internal view returns (Data storage) {
    return _self.elements[_self.lastIndex()];
  }

  /// @dev Gets the index of the last element in the list.
  ///
  /// This function will revert if there are no elements in the list.
  ///
  /// @return the index of the last element.
  function lastIndex(List storage _self) internal view returns (uint256) {
    uint256 _length = _self.length();
    return _length.sub(1, "Vault.List: empty");
  }

  /// @dev Gets the number of elements in the list.
  ///
  /// @return the number of elements.
  function length(List storage _self) internal view returns (uint256) {
    return _self.elements.length;
  }
}


// File contracts/Alchemist.sol

pragma solidity ^0.6.12;
pragma experimental ABIEncoderV2;

//import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";











// ERC20,removing ERC20 from the alchemist
//    ___    __        __                _               ___                              __         _
//   / _ |  / / ____  / /  ___   __ _   (_) __ __       / _ \  ____ ___   ___ ___   ___  / /_  ___  (_)
//  / __ | / / / __/ / _ \/ -_) /  ' \ / /  \ \ /      / ___/ / __// -_) (_-</ -_) / _ \/ __/ (_-< _
// /_/ |_|/_/  \__/ /_//_/\__/ /_/_/_//_/  /_\_\      /_/    /_/   \__/ /___/\__/ /_//_/\__/ /___/(_)
//
//      ___       __        ______  __    __   _______ .___  ___.  __       _______..___________.
//     /   \     |  |      /      ||  |  |  | |   ____||   \/   | |  |     /       ||           |
//    /  ^  \    |  |     |  ,----'|  |__|  | |  |__   |  \  /  | |  |    |   (----``---|  |----`
//   /  /_\  \   |  |     |  |     |   __   | |   __|  |  |\/|  | |  |     \   \        |  |
//  /  _____  \  |  `----.|  `----.|  |  |  | |  |____ |  |  |  | |  | .----)   |       |  |
// /__/     \__\ |_______| \______||__|  |__| |_______||__|  |__| |__| |_______/        |__|

contract Alchemist is  ReentrancyGuard {
  using CDP for CDP.Data;
  using FixedPointMath for FixedPointMath.uq192x64;
  using Vault for Vault.Data;
  using Vault for Vault.List;
  using SafeERC20 for IMintableERC20;
  using SafeMath for uint256;
  using Address for address;

  address public constant ZERO_ADDRESS = address(0);

  /// @dev Resolution for all fixed point numeric parameters which represent percents. The resolution allows for a
  /// granularity of 0.01% increments.
  uint256 public constant PERCENT_RESOLUTION = 10000;

  /// @dev The minimum value that the collateralization limit can be set to by the governance. This is a safety rail
  /// to prevent the collateralization from being set to a value which breaks the system.
  ///
  /// This value is equal to 100%.
  ///
  /// IMPORTANT: This constant is a raw FixedPointMath.uq192x64 value and assumes a resolution of 64 bits. If the
  ///            resolution for the FixedPointMath library changes this constant must change as well.
  uint256 public constant MINIMUM_COLLATERALIZATION_LIMIT = 1000000000000000000;

  /// @dev The maximum value that the collateralization limit can be set to by the governance. This is a safety rail
  /// to prevent the collateralization from being set to a value which breaks the system.
  ///
  /// This value is equal to 400%.
  ///
  /// IMPORTANT: This constant is a raw FixedPointMath.uq192x64 value and assumes a resolution of 64 bits. If the
  ///            resolution for the FixedPointMath library changes this constant must change as well.
  uint256 public constant MAXIMUM_COLLATERALIZATION_LIMIT = 4000000000000000000;

  event GovernanceUpdated(
    address governance
  );

  event PendingGovernanceUpdated(
    address pendingGovernance
  );

  event SentinelUpdated(
    address sentinel
  );

  event TransmuterUpdated(
    address transmuter
  );

  event RewardsUpdated(
    address treasury
  );

  event HarvestFeeUpdated(
    uint256 fee
  );

  event CollateralizationLimitUpdated(
    uint256 limit
  );

  event EmergencyExitUpdated(
    bool status
  );

  event ActiveVaultUpdated(
    IVaultAdapter indexed adapter
  );

  event FundsHarvested(
    uint256 withdrawnAmount,
    uint256 decreasedValue
  );

  event FundsRecalled(
    uint256 indexed vaultId,
    uint256 withdrawnAmount,
    uint256 decreasedValue
  );

  event FundsFlushed(
    uint256 amount
  );

  event TokensDeposited(
    address indexed account,
    uint256 amount
  );

  event TokensWithdrawn(
    address indexed account,
    uint256 requestedAmount,
    uint256 withdrawnAmount,
    uint256 decreasedValue
  );

  event TokensRepaid(
    address indexed account,
    uint256 parentAmount,
    uint256 childAmount
  );

  event TokensLiquidated(
    address indexed account,
    uint256 requestedAmount,
    uint256 withdrawnAmount,
    uint256 decreasedValue
  );

  /// @dev The token that this contract is using as the parent asset.
  IMintableERC20 public token;

   /// @dev The token that this contract is using as the child asset.
  IMintableERC20 public xtoken;

  /// @dev The address of the account which currently has administrative capabilities over this contract.
  address public governance;

  /// @dev The address of the pending governance.
  address public pendingGovernance;

  /// @dev The address of the account which can initiate an emergency withdraw of funds in a vault.
  address public sentinel;

  /// @dev The address of the contract which will transmute synthetic tokens back into native tokens.
  address public transmuter;

  /// @dev The address of the contract which will receive fees.
  address public rewards;

  /// @dev The percent of each profitable harvest that will go to the rewards contract.
  uint256 public harvestFee;

  /// @dev The total amount the native token deposited into the system that is owned by external users.
  uint256 public totalDeposited;

  /// @dev when movemetns are bigger than this number flush is activated.
  uint256 public flushActivator;

  /// @dev A flag indicating if the contract has been initialized yet.
  bool public initialized;

  /// @dev A flag indicating if deposits and flushes should be halted and if all parties should be able to recall
  /// from the active vault.
  bool public emergencyExit;

  /// @dev The context shared between the CDPs.
  CDP.Context private _ctx;

  /// @dev A mapping of all of the user CDPs. If a user wishes to have multiple CDPs they will have to either
  /// create a new address or set up a proxy contract that interfaces with this contract.
  mapping(address => CDP.Data) private _cdps;

  /// @dev A list of all of the vaults. The last element of the list is the vault that is currently being used for
  /// deposits and withdraws. Vaults before the last element are considered inactive and are expected to be cleared.
  Vault.List private _vaults;

  /// @dev The address of the link oracle.
  address public _linkGasOracle;

  /// @dev The minimum returned amount needed to be on peg according to the oracle.
  uint256 public pegMinimum;

  constructor(
    IMintableERC20 _token,
    IMintableERC20 _xtoken,
    address _governance,
    address _sentinel
  )
    public
    /*ERC20(
      string(abi.encodePacked("Alchemic ", _token.name())),
      string(abi.encodePacked("al", _token.symbol()))
    )*/
  {
    require(_governance != ZERO_ADDRESS, "Alchemist: governance address cannot be 0x0.");
    require(_sentinel != ZERO_ADDRESS, "Alchemist: sentinel address cannot be 0x0.");

    token = _token;
    xtoken = _xtoken;
    governance = _governance;
    sentinel = _sentinel;
    flushActivator = 100000 ether;// change for non 18 digit tokens

    //_setupDecimals(_token.decimals());
    uint256 COLL_LIMIT = MINIMUM_COLLATERALIZATION_LIMIT.mul(2);
    _ctx.collateralizationLimit = FixedPointMath.uq192x64(COLL_LIMIT);
    _ctx.accumulatedYieldWeight = FixedPointMath.uq192x64(0);
  }

  /// @dev Sets the pending governance.
  ///
  /// This function reverts if the new pending governance is the zero address or the caller is not the current
  /// governance. This is to prevent the contract governance being set to the zero address which would deadlock
  /// privileged contract functionality.
  ///
  /// @param _pendingGovernance the new pending governance.
  function setPendingGovernance(address _pendingGovernance) external onlyGov {
    require(_pendingGovernance != ZERO_ADDRESS, "Alchemist: governance address cannot be 0x0.");

    pendingGovernance = _pendingGovernance;

    emit PendingGovernanceUpdated(_pendingGovernance);
  }

  /// @dev Accepts the role as governance.
  ///
  /// This function reverts if the caller is not the new pending governance.
  function acceptGovernance() external  {
    require(msg.sender == pendingGovernance,"sender is not pendingGovernance");
    address _pendingGovernance = pendingGovernance;
    governance = _pendingGovernance;

    emit GovernanceUpdated(_pendingGovernance);
  }

  function setSentinel(address _sentinel) external onlyGov {

    require(_sentinel != ZERO_ADDRESS, "Alchemist: sentinel address cannot be 0x0.");

    sentinel = _sentinel;

    emit SentinelUpdated(_sentinel);
  }

  /// @dev Sets the transmuter.
  ///
  /// This function reverts if the new transmuter is the zero address or the caller is not the current governance.
  ///
  /// @param _transmuter the new transmuter.
  function setTransmuter(address _transmuter) external onlyGov {

    // Check that the transmuter address is not the zero address. Setting the transmuter to the zero address would break
    // transfers to the address because of `safeTransfer` checks.
    require(_transmuter != ZERO_ADDRESS, "Alchemist: transmuter address cannot be 0x0.");

    transmuter = _transmuter;

    emit TransmuterUpdated(_transmuter);
  }
  /// @dev Sets the flushActivator.
  ///
  /// @param _flushActivator the new flushActivator.
  function setFlushActivator(uint256 _flushActivator) external onlyGov {
    flushActivator = _flushActivator;

  }

  /// @dev Sets the rewards contract.
  ///
  /// This function reverts if the new rewards contract is the zero address or the caller is not the current governance.
  ///
  /// @param _rewards the new rewards contract.
  function setRewards(address _rewards) external onlyGov {

    // Check that the rewards address is not the zero address. Setting the rewards to the zero address would break
    // transfers to the address because of `safeTransfer` checks.
    require(_rewards != ZERO_ADDRESS, "Alchemist: rewards address cannot be 0x0.");

    rewards = _rewards;

    emit RewardsUpdated(_rewards);
  }

  /// @dev Sets the harvest fee.
  ///
  /// This function reverts if the caller is not the current governance.
  ///
  /// @param _harvestFee the new harvest fee.
  function setHarvestFee(uint256 _harvestFee) external onlyGov {

    // Check that the harvest fee is within the acceptable range. Setting the harvest fee greater than 100% could
    // potentially break internal logic when calculating the harvest fee.
    require(_harvestFee <= PERCENT_RESOLUTION, "Alchemist: harvest fee above maximum.");

    harvestFee = _harvestFee;

    emit HarvestFeeUpdated(_harvestFee);
  }

  /// @dev Sets the collateralization limit.
  ///
  /// This function reverts if the caller is not the current governance or if the collateralization limit is outside
  /// of the accepted bounds.
  ///
  /// @param _limit the new collateralization limit.
  function setCollateralizationLimit(uint256 _limit) external onlyGov {

    require(_limit >= MINIMUM_COLLATERALIZATION_LIMIT, "Alchemist: collateralization limit below minimum.");
    require(_limit <= MAXIMUM_COLLATERALIZATION_LIMIT, "Alchemist: collateralization limit above maximum.");

    _ctx.collateralizationLimit = FixedPointMath.uq192x64(_limit);

    emit CollateralizationLimitUpdated(_limit);
  }
  /// @dev Set oracle.
  function setOracleAddress(address Oracle, uint256 peg) external onlyGov {
    _linkGasOracle = Oracle;
    pegMinimum = peg;
  }
  /// @dev Sets if the contract should enter emergency exit mode.
  ///
  /// @param _emergencyExit if the contract should enter emergency exit mode.
  function setEmergencyExit(bool _emergencyExit) external {
    require(msg.sender == governance || msg.sender == sentinel, "");

    emergencyExit = _emergencyExit;

    emit EmergencyExitUpdated(_emergencyExit);
  }

  /// @dev Gets the collateralization limit.
  ///
  /// The collateralization limit is the minimum ratio of collateral to debt that is allowed by the system.
  ///
  /// @return the collateralization limit.
  function collateralizationLimit() external view returns (FixedPointMath.uq192x64 memory) {
    return _ctx.collateralizationLimit;
  }

  /// @dev Initializes the contract.
  ///
  /// This function checks that the transmuter and rewards have been set and sets up the active vault.
  ///
  /// @param _adapter the vault adapter of the active vault.
  function initialize(IVaultAdapter _adapter) external onlyGov {

    require(!initialized, "Alchemist: already initialized");

    require(transmuter != ZERO_ADDRESS, "Alchemist: cannot initialize transmuter address to 0x0");
    require(rewards != ZERO_ADDRESS, "Alchemist: cannot initialize rewards address to 0x0");

    _updateActiveVault(_adapter);

    initialized = true;
  }

  /// @dev Migrates the system to a new vault.
  ///
  /// This function reverts if the vault adapter is the zero address, if the token that the vault adapter accepts
  /// is not the token that this contract defines as the parent asset, or if the contract has not yet been initialized.
  ///
  /// @param _adapter the adapter for the vault the system will migrate to.
  function migrate(IVaultAdapter _adapter) external expectInitialized onlyGov {

    _updateActiveVault(_adapter);
  }

  /// @dev Harvests yield from a vault.
  ///
  /// @param _vaultId the identifier of the vault to harvest from.
  ///
  /// @return the amount of funds that were harvested from the vault.
  function harvest(uint256 _vaultId) external expectInitialized returns (uint256, uint256) {

    Vault.Data storage _vault = _vaults.get(_vaultId);

    (uint256 _harvestedAmount, uint256 _decreasedValue) = _vault.harvest(address(this));

    if (_harvestedAmount > 0) {
      uint256 _feeAmount = _harvestedAmount.mul(harvestFee).div(PERCENT_RESOLUTION);
      uint256 _distributeAmount = _harvestedAmount.sub(_feeAmount);

      FixedPointMath.uq192x64 memory _weight = FixedPointMath.fromU256(_distributeAmount).div(totalDeposited);
      _ctx.accumulatedYieldWeight = _ctx.accumulatedYieldWeight.add(_weight);

      if (_feeAmount > 0) {
        token.safeTransfer(rewards, _feeAmount);
      }

      if (_distributeAmount > 0) {
        _distributeToTransmuter(_distributeAmount);

        // token.safeTransfer(transmuter, _distributeAmount); previous version call
      }
    }

    emit FundsHarvested(_harvestedAmount, _decreasedValue);

    return (_harvestedAmount, _decreasedValue);
  }

  /// @dev Recalls an amount of deposited funds from a vault to this contract.
  ///
  /// @param _vaultId the identifier of the recall funds from.
  ///
  /// @return the amount of funds that were recalled from the vault to this contract and the decreased vault value.
  function recall(uint256 _vaultId, uint256 _amount) external nonReentrant expectInitialized returns (uint256, uint256) {

    return _recallFunds(_vaultId, _amount);
  }

  /// @dev Recalls all the deposited funds from a vault to this contract.
  ///
  /// @param _vaultId the identifier of the recall funds from.
  ///
  /// @return the amount of funds that were recalled from the vault to this contract and the decreased vault value.
  function recallAll(uint256 _vaultId) external nonReentrant expectInitialized returns (uint256, uint256) {
    Vault.Data storage _vault = _vaults.get(_vaultId);
    return _recallFunds(_vaultId, _vault.totalDeposited);
  }

  /// @dev Flushes buffered tokens to the active vault.
  ///
  /// This function reverts if an emergency exit is active. This is in place to prevent the potential loss of
  /// additional funds.
  ///
  /// @return the amount of tokens flushed to the active vault.
  function flush() external nonReentrant expectInitialized returns (uint256) {

    // Prevent flushing to the active vault when an emergency exit is enabled to prevent potential loss of funds if
    // the active vault is poisoned for any reason.
    require(!emergencyExit, "emergency pause enabled");

    return flushActiveVault();
  }

  /// @dev Internal function to flush buffered tokens to the active vault.
  ///
  /// This function reverts if an emergency exit is active. This is in place to prevent the potential loss of
  /// additional funds.
  ///
  /// @return the amount of tokens flushed to the active vault.
  function flushActiveVault() internal returns (uint256) {

    Vault.Data storage _activeVault = _vaults.last();
    uint256 _depositedAmount = _activeVault.depositAll();

    emit FundsFlushed(_depositedAmount);

    return _depositedAmount;
  }

  /// @dev Deposits collateral into a CDP.
  ///
  /// This function reverts if an emergency exit is active. This is in place to prevent the potential loss of
  /// additional funds.
  ///
  /// @param _amount the amount of collateral to deposit.
  function deposit(uint256 _amount) external nonReentrant noContractAllowed expectInitialized {

    require(!emergencyExit, "emergency pause enabled");

    CDP.Data storage _cdp = _cdps[msg.sender];
    _cdp.update(_ctx);

    token.safeTransferFrom(msg.sender, address(this), _amount);
    if(_amount >= flushActivator) {
      flushActiveVault();
    }
    totalDeposited = totalDeposited.add(_amount);

    _cdp.totalDeposited = _cdp.totalDeposited.add(_amount);
    _cdp.lastDeposit = block.number;

    emit TokensDeposited(msg.sender, _amount);
  }

  /// @dev Attempts to withdraw part of a CDP's collateral.
  ///
  /// This function reverts if a deposit into the CDP was made in the same block. This is to prevent flash loan attacks
  /// on other internal or external systems.
  ///
  /// @param _amount the amount of collateral to withdraw.
  function withdraw(uint256 _amount) external nonReentrant noContractAllowed expectInitialized returns (uint256, uint256) {

    CDP.Data storage _cdp = _cdps[msg.sender];
    require(block.number > _cdp.lastDeposit, "");

    _cdp.update(_ctx);

    (uint256 _withdrawnAmount, uint256 _decreasedValue) = _withdrawFundsTo(msg.sender, _amount);

    _cdp.totalDeposited = _cdp.totalDeposited.sub(_decreasedValue, "Exceeds withdrawable amount");
    _cdp.checkHealth(_ctx, "Action blocked: unhealthy collateralization ratio");
    if(_amount >= flushActivator) {
      flushActiveVault();
    }
    emit TokensWithdrawn(msg.sender, _amount, _withdrawnAmount, _decreasedValue);

    return (_withdrawnAmount, _decreasedValue);
  }

  /// @dev Repays debt with the native and or synthetic token.
  ///
  /// An approval is required to transfer native tokens to the transmuter.
  function repay(uint256 _parentAmount, uint256 _childAmount) external nonReentrant noContractAllowed onLinkCheck expectInitialized {

    CDP.Data storage _cdp = _cdps[msg.sender];
    _cdp.update(_ctx);

    if (_parentAmount > 0) {
      token.safeTransferFrom(msg.sender, address(this), _parentAmount);
      _distributeToTransmuter(_parentAmount);
    }

    if (_childAmount > 0) {
      xtoken.burnFrom(msg.sender, _childAmount);
      //lower debt cause burn
      xtoken.lowerHasMinted(_childAmount);
    }

    uint256 _totalAmount = _parentAmount.add(_childAmount);
    _cdp.totalDebt = _cdp.totalDebt.sub(_totalAmount, "");

    emit TokensRepaid(msg.sender, _parentAmount, _childAmount);
  }

  /// @dev Attempts to liquidate part of a CDP's collateral to pay back its debt.
  ///
  /// @param _amount the amount of collateral to attempt to liquidate.
  function liquidate(uint256 _amount) external nonReentrant noContractAllowed onLinkCheck expectInitialized returns (uint256, uint256) {
    CDP.Data storage _cdp = _cdps[msg.sender];
    _cdp.update(_ctx);

    // don't attempt to liquidate more than is possible
    if(_amount > _cdp.totalDebt){
      _amount = _cdp.totalDebt;
    }
    (uint256 _withdrawnAmount, uint256 _decreasedValue) = _withdrawFundsTo(address(this), _amount);
    //changed to new transmuter compatibillity
    _distributeToTransmuter(_withdrawnAmount);

    _cdp.totalDeposited = _cdp.totalDeposited.sub(_decreasedValue, "");
    _cdp.totalDebt = _cdp.totalDebt.sub(_withdrawnAmount, "");
    emit TokensLiquidated(msg.sender, _amount, _withdrawnAmount, _decreasedValue);

    return (_withdrawnAmount, _decreasedValue);
  }

  /// @dev Mints synthetic tokens by either claiming credit or increasing the debt.
  ///
  /// Claiming credit will take priority over increasing the debt.
  ///
  /// This function reverts if the debt is increased and the CDP health check fails.
  ///
  /// @param _amount the amount of alchemic tokens to borrow.
  function mint(uint256 _amount) external nonReentrant noContractAllowed onLinkCheck expectInitialized {

    CDP.Data storage _cdp = _cdps[msg.sender];
    _cdp.update(_ctx);

    uint256 _totalCredit = _cdp.totalCredit;

    if (_totalCredit < _amount) {
      uint256 _remainingAmount = _amount.sub(_totalCredit);
      _cdp.totalDebt = _cdp.totalDebt.add(_remainingAmount);
      _cdp.totalCredit = 0;

      _cdp.checkHealth(_ctx, "Alchemist: Loan-to-value ratio breached");
    } else {
      _cdp.totalCredit = _totalCredit.sub(_amount);
    }

    xtoken.mint(msg.sender, _amount);
    if(_amount >= flushActivator) {
      flushActiveVault();
    }
  }

  /// @dev Gets the number of vaults in the vault list.
  ///
  /// @return the vault count.
  function vaultCount() external view returns (uint256) {
    return _vaults.length();
  }

  /// @dev Get the adapter of a vault.
  ///
  /// @param _vaultId the identifier of the vault.
  ///
  /// @return the vault adapter.
  function getVaultAdapter(uint256 _vaultId) external view returns (IVaultAdapter) {
    Vault.Data storage _vault = _vaults.get(_vaultId);
    return _vault.adapter;
  }

  /// @dev Get the total amount of the parent asset that has been deposited into a vault.
  ///
  /// @param _vaultId the identifier of the vault.
  ///
  /// @return the total amount of deposited tokens.
  function getVaultTotalDeposited(uint256 _vaultId) external view returns (uint256) {
    Vault.Data storage _vault = _vaults.get(_vaultId);
    return _vault.totalDeposited;
  }

  /// @dev Get the total amount of collateral deposited into a CDP.
  ///
  /// @param _account the user account of the CDP to query.
  ///
  /// @return the deposited amount of tokens.
  function getCdpTotalDeposited(address _account) external view returns (uint256) {
    CDP.Data storage _cdp = _cdps[_account];
    return _cdp.totalDeposited;
  }

  /// @dev Get the total amount of alchemic tokens borrowed from a CDP.
  ///
  /// @param _account the user account of the CDP to query.
  ///
  /// @return the borrowed amount of tokens.
  function getCdpTotalDebt(address _account) external view returns (uint256) {
    CDP.Data storage _cdp = _cdps[_account];
    return _cdp.getUpdatedTotalDebt(_ctx);
  }

  /// @dev Get the total amount of credit that a CDP has.
  ///
  /// @param _account the user account of the CDP to query.
  ///
  /// @return the amount of credit.
  function getCdpTotalCredit(address _account) external view returns (uint256) {
    CDP.Data storage _cdp = _cdps[_account];
    return _cdp.getUpdatedTotalCredit(_ctx);
  }

  /// @dev Gets the last recorded block of when a user made a deposit into their CDP.
  ///
  /// @param _account the user account of the CDP to query.
  ///
  /// @return the block number of the last deposit.
  function getCdpLastDeposit(address _account) external view returns (uint256) {
    CDP.Data storage _cdp = _cdps[_account];
    return _cdp.lastDeposit;
  }
  /// @dev sends tokens to the transmuter
  ///
  /// benefit of great nation of transmuter
  function _distributeToTransmuter(uint256 amount) internal {
        token.approve(transmuter,amount);
        ITransmuter(transmuter).distribute(address(this),amount);
        // lower debt cause of 'burn'
        xtoken.lowerHasMinted(amount);
  }
  /// @dev Checks that parent token is on peg.
  ///
  /// This is used over a modifier limit of pegged interactions.
  modifier onLinkCheck() {
    if(pegMinimum > 0 ){
      uint256 oracleAnswer = uint256(IChainlink(_linkGasOracle).latestAnswer());
      require(oracleAnswer > pegMinimum, "off peg limitation");
    }
    _;
  }
  /// @dev Checks that caller is not a eoa.
  ///
  /// This is used to prevent contracts from interacting.
  modifier noContractAllowed() {
    require(!address(msg.sender).isContract() && msg.sender == tx.origin, "Sorry we do not accept contract!");
    _;
  }
  /// @dev Checks that the contract is in an initialized state.
  ///
  /// This is used over a modifier to reduce the size of the contract
  modifier expectInitialized() {
    require(initialized, "Alchemist: not initialized.");
    _;
  }

  /// @dev Checks that the current message sender or caller is a specific address.
  ///
  /// @param _expectedCaller the expected caller.
  function _expectCaller(address _expectedCaller) internal {
    require(msg.sender == _expectedCaller, "");
  }

  /// @dev Checks that the current message sender or caller is the governance address.
  ///
  ///
  modifier onlyGov() {
    require(msg.sender == governance, "Alchemist: only governance.");
    _;
  }
  /// @dev Updates the active vault.
  ///
  /// This function reverts if the vault adapter is the zero address, if the token that the vault adapter accepts
  /// is not the token that this contract defines as the parent asset, or if the contract has not yet been initialized.
  ///
  /// @param _adapter the adapter for the new active vault.
  function _updateActiveVault(IVaultAdapter _adapter) internal {
    require(_adapter != IVaultAdapter(ZERO_ADDRESS), "Alchemist: active vault address cannot be 0x0.");
    require(_adapter.token() == token, "Alchemist: token mismatch.");

    _vaults.push(Vault.Data({
      adapter: _adapter,
      totalDeposited: 0
    }));

    emit ActiveVaultUpdated(_adapter);
  }

  /// @dev Recalls an amount of funds from a vault to this contract.
  ///
  /// @param _vaultId the identifier of the recall funds from.
  /// @param _amount  the amount of funds to recall from the vault.
  ///
  /// @return the amount of funds that were recalled from the vault to this contract and the decreased vault value.
  function _recallFunds(uint256 _vaultId, uint256 _amount) internal returns (uint256, uint256) {
    require(emergencyExit || msg.sender == governance || _vaultId != _vaults.lastIndex(), "Alchemist: not an emergency, not governance, and user does not have permission to recall funds from active vault");

    Vault.Data storage _vault = _vaults.get(_vaultId);
    (uint256 _withdrawnAmount, uint256 _decreasedValue) = _vault.withdraw(address(this), _amount);

    emit FundsRecalled(_vaultId, _withdrawnAmount, _decreasedValue);

    return (_withdrawnAmount, _decreasedValue);
  }

  /// @dev Attempts to withdraw funds from the active vault to the recipient.
  ///
  /// Funds will be first withdrawn from this contracts balance and then from the active vault. This function
  /// is different from `recallFunds` in that it reduces the total amount of deposited tokens by the decreased
  /// value of the vault.
  ///
  /// @param _recipient the account to withdraw the funds to.
  /// @param _amount    the amount of funds to withdraw.
  function _withdrawFundsTo(address _recipient, uint256 _amount) internal returns (uint256, uint256) {
    // Pull the funds from the buffer.
    uint256 _bufferedAmount = Math.min(_amount, token.balanceOf(address(this)));

    if (_recipient != address(this)) {
      token.safeTransfer(_recipient, _bufferedAmount);
    }

    uint256 _totalWithdrawn = _bufferedAmount;
    uint256 _totalDecreasedValue = _bufferedAmount;

    uint256 _remainingAmount = _amount.sub(_bufferedAmount);

    // Pull the remaining funds from the active vault.
    if (_remainingAmount > 0) {
      Vault.Data storage _activeVault = _vaults.last();
      (uint256 _withdrawAmount, uint256 _decreasedValue) = _activeVault.withdraw(
        _recipient,
        _remainingAmount
      );

      _totalWithdrawn = _totalWithdrawn.add(_withdrawAmount);
      _totalDecreasedValue = _totalDecreasedValue.add(_decreasedValue);
    }

    totalDeposited = totalDeposited.sub(_totalDecreasedValue);

    return (_totalWithdrawn, _totalDecreasedValue);
  }
}