pragma solidity ^0.8.11;
// 📱 Telegram: https://t.me/MemeForceOfficial
// 🌐 Twitter: https://twitter.com/MemeForce_LP
//
//███╗░░░███╗███████╗███╗░░░███╗███████╗░░░░░░███████╗░█████╗░██████╗░░█████╗░███████╗
//████╗░████║██╔════╝████╗░████║██╔════╝░░░░░░██╔════╝██╔══██╗██╔══██╗██╔══██╗██╔════╝
//██╔████╔██║█████╗░░██╔████╔██║█████╗░░█████╗█████╗░░██║░░██║██████╔╝██║░░╚═╝█████╗░░
//██║╚██╔╝██║██╔══╝░░██║╚██╔╝██║██╔══╝░░╚════╝██╔══╝░░██║░░██║██╔══██╗██║░░██╗██╔══╝░░
//██║░╚═╝░██║███████╗██║░╚═╝░██║███████╗░░░░░░██║░░░░░╚█████╔╝██║░░██║╚█████╔╝███████╗
//╚═╝░░░░░╚═╝╚══════╝╚═╝░░░░░╚═╝╚══════╝░░░░░░╚═╝░░░░░░╚════╝░╚═╝░░╚═╝░╚════╝░╚══════╝
//                                              ████                                            
//                                            ██▒▒▒▒▓▓                                          
//                                          ██▒▒▒▒▒▒▒▒▓▓                                        
//                                        ██▒▒▒▒▒▒▒▒▒▒▒▒▓▓                                      
//                                      ██▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██                                    
//                                    ██░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░▓▓                                  
//                                    ████░░░░░░░░░░░░░░░░████                                  
//                                  ▓▓░░░░██▓▓▓▓▓▓▓▓▒▒▒▒▓▓░░░░██                                
//                                  ██░░░░░░░░░░░░░░░░░░░░░░░░██                                
//                                  ██░░░░░░░░░░░░░░░░░░░░░░░░██                                
//                                ██░░░░░░░░██████████▓▓░░░░░░░░██                              
//                                ██░░░░░░██▓▓▓▓▓▓▓▓▓▓▓▓██░░░░░░██                              
//                                ██░░░░▓▓▓▓▒▒▒▒▓▓▓▓▓▓▓▓▓▓██░░░░██                              
//                                ██░░░░██▓▓▒▒▒▒▓▓▓▓▓▓▓▓▓▓██░░░░██                              
//                                ██░░░░██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓██░░░░██                              
//                                ██░░░░██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓██░░░░██                              
//                              ██░░░░░░██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▓▓░░░░░░██                            
//                              ██░░░░░░░░██▓▓▓▓▓▓▓▓▓▓▒▒▓▓░░░░░░░░██                            
//                              ▓▓░░░░░░░░░░████████████░░░░░░░░░░██                            
//                            ▒▒██░░░░░░░░░░▒▒▓▓▒▒▒▒▒▒▒▒░░░░░░░░░░██▒▒                          
//                          ░░▓▓██░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██▓▓░░                        
//                          ██▒▒██░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██▒▒██                        
//                        ▓▓▒▒▒▒██░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██▒▒▒▒▓▓                      
//                        ██▒▒▒▒██░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██▒▒▒▒██                      
//                      ▓▓▒▒▒▒▒▒████▓▓▓▓░░░░░░░░░░░░░░░░░░░░▓▓▒▒▒▒██▒▒▒▒▒▒▓▓                    
//                      ██▒▒▒▒▒▒██▒▒▒▒▒▒████████████████████▒▒▒▒▒▒██▒▒▒▒▒▒██                    
//                    ▓▓▒▒▒▒▒▒▒▒██▒▒▒▒▒▒▓▓▓▓▓▓▓▓▒▒▒▒▒▒▓▓▓▓▒▒▒▒▒▒▒▒██▒▒▒▒▒▒▒▒▓▓                  
//                    ██▒▒▒▒▒▒▒▒██▓▓▓▓██▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓██████▒▒▒▒▒▒▒▒██                  
//                  ██▒▒▒▒▒▒▒▒▓▓▓▓▒▒▒▒▒▒████████████████████▒▒▒▒▒▒██▓▓▓▓▒▒▒▒▒▒▓▓                
//                  ██▒▒▒▒▓▓▒▒▒▒▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██▒▒▒▒▒▒▒▒▒▒▓▓                
//                ██▒▒▓▓▒▒▒▒▒▒▓▓██▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██▓▓▓▓▒▒▒▒▓▓▒▒██              
//                ██▓▓▒▒▒▒▒▒░░░░██▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██░░░░▒▒▒▒▒▒▒▒██              
//                ██▒▒▓▓░░░░░░░░████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒████████░░░░░░░░▒▒▒▒██              
//                ██▒▒░░░░░░▒▒░░██░░░░░░████▓▓██▓▓████▓▓▓▓██░░░░░░██░░▒▒░░░░░░▒▒██              
//                ██░░░░▒▒░░▒▒░░░░██████░░░░░░░░░░░░░░░░░░░░██████░░░░▒▒░░▒▒░░░░██              
//              ██░░░░░░▒▒░░▒▒░░████░░░░██▓▓██████████▓▓████░░░░████░░▒▒░░▒▒░░░░░░██            
//              ██░░▒▒░░▒▒░░████  ██████░░░░░░░░░░░░░░░░░░░░██████  ████░░▒▒░░▒▒░░██            
//              ██░░▒▒░░████      ██▓▓▓▓██████▓▓▓▓▓▓████▓▓██▓▓▓▓██      ████░░▒▒░░██            
//              ██░░▒▒██          ██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▓▓▓▓▓▓██          ██▒▒░░██            
//              ██░░██              ████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒████              ▓▓░░██            
//              ████              ▒▒▒▒▒▒████████████████▓▓▓▓▒▒░░▒▒              ████            
//                                ▒▒▒▒▒▒░░░░░░        ░░░░░░▒▒▒▒▒▒                              
//                              ▒▒▒▒▒▒▒▒░░░░░░░░    ░░░░░░░░░░▒▒▒▒▒▒                            
//                              ▒▒▒▒▒▒░░▒▒░░░░░░░░░░░░░░░░▒▒░░▒▒▒▒▒▒░░                          
//                                 ▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒                          
//                                ░░▒▒▒▒▒▒▒▒▒▒░░░░░░░░▒▒░░▒▒▒▒▒▒    ░░                          
//                                ▒▒▒▒▒▒░░▒▒▒▒▒▒▒▒░░▒▒▒▒▒▒▒▒▒▒▒▒                                
//                                        ▒▒▒▒    ▒▒▒▒▒▒                                        
//  ░░░░                                                  ░░    ░░░░                            
//  ░░                                                                                          
//  ░░░░                                                                  ░░░░░░░░░░░░  ░░░░░░  
//
//██╗░░░░░░█████╗░██╗░░░██╗███╗░░██╗░█████╗░██╗░░██╗██████╗░░█████╗░██████╗░
//██║░░░░░██╔══██╗██║░░░██║████╗░██║██╔══██╗██║░░██║██╔══██╗██╔══██╗██╔══██╗
//██║░░░░░███████║██║░░░██║██╔██╗██║██║░░╚═╝███████║██████╔╝███████║██║░░██║
//██║░░░░░██╔══██║██║░░░██║██║╚████║██║░░██╗██╔══██║██╔═══╝░██╔══██║██║░░██║
//███████╗██║░░██║╚██████╔╝██║░╚███║╚█████╔╝██║░░██║██║░░░░░██║░░██║██████╔╝
//╚══════╝╚═╝░░╚═╝░╚═════╝░╚═╝░░╚══╝░╚════╝░╚═╝░░╚═╝╚═╝░░░░░╚═╝░░╚═╝╚═════╝░
contract Shared {
    address constant public ROUTER = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
}

interface ISwapFactory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

interface ISwapPair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

interface ISwapRouter01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}


interface ISwapRouter02 is ISwapRouter01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return payable(msg.sender);
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */

contract Ownable is Context {
    address private _owner;
    address private _previousOwner;
    uint256 private _lockTime;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

     /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

interface IERC20 {

    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */

interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

/**
 * @dev Collection of functions related to the address type
 */

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
 
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

contract MemeForce is ERC20, Ownable, Shared {
    using Address for address;
    using Address for address payable;

    ISwapRouter02 public uniswapV2Router;
    address public  uniswapV2Pair;

    bool private swapping;

    address public constant BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;
    
    uint256 public swapTokensAtAmount = 200_000_000 * (10**18);
    uint256 public blacklistTimeout = 30 minutes;
    
    mapping(address => uint256) public isBlacklistedUntil;

    uint256 public liquidityFee;
    uint256 public marketingFee;
    uint256 public devFee;
    uint256 public feeDenominator;

    uint256 public maxTxAmount;
    uint256 private launchedAt;
    bool public tradingOpened;
    uint256 private antibotEndTime;
    
    
    address public marketingWalletAddress;
    address public devWalletAddress;

     // exlcude from fees and max transaction amount
    mapping (address => bool) private isExcludedFromFees;


    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping (address => bool) public automatedMarketMakerPairs;

    event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
    event ExcludeFromFees(address indexed account, bool isExcluded);
    event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);
    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
    event AccidentallySentTokenWithdrawn (address indexed token, address indexed account, uint256 amount);
    event AccidentallySentETHWithdrawn (address indexed account, uint256 amount);

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiquidity
    );

    constructor(
        uint256 _liquidityFee, 
        uint256 _marketingFee, 
        uint256 _devFee, 
        uint256 _feeDenominator, 
        address _marketingWallet, 
        address _devWallet) 
        ERC20("MemeForce", "$MF") {
        ISwapRouter02 _uniswapV2Router = ISwapRouter02(ROUTER);
         // Create a uniswap pair for this new token
        address _uniswapV2Pair = ISwapFactory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());

        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = _uniswapV2Pair;

        _setAutomatedMarketMakerPair(_uniswapV2Pair, true);

        //Set Fees and wallets
        liquidityFee = _liquidityFee;
        marketingFee = _marketingFee;
        devFee = _devFee;
        feeDenominator = _feeDenominator;
        marketingWalletAddress = _marketingWallet;
        devWalletAddress = _devWallet;

        // exclude from paying fees or having max transaction amount
        excludeFromFees(owner(), true);
        excludeFromFees(marketingWalletAddress, true);
        excludeFromFees(devWalletAddress, true);
        excludeFromFees(BURN_ADDRESS, true);
        excludeFromFees(address(this), true);

        /*
            _mint is an internal function in ERC20.sol that is only called here,
            and CANNOT be called ever again
        */
        _mint(owner(), 1_000_000_000_000 * 10**18);
        maxTxAmount = totalSupply() / 500000; // 0.2%
        antibotEndTime = launchedAt + 10;
    }

    receive() external payable {}
    

    function airdropDifferentNumberOfTokens (address airdropWallet, address[] calldata airdropRecipients, uint256[] calldata airdropAmounts) external onlyOwner {
        if (!isExcludedFromFees[airdropWallet])
        excludeFromFees(airdropWallet, true);
        require (airdropRecipients.length == airdropAmounts.length, "Length of recipient and amount arrays must be the same");
        
        // airdropWallet needs to have approved the contract address to spend at least the sum of airdropAmounts
        for (uint256 i = 0; i < airdropRecipients.length; i++)
            _transfer (airdropWallet, airdropRecipients[i], airdropAmounts[i]);
    }

    function updateUniswapV2Router(address newAddress) public onlyOwner {
        require(newAddress != address(uniswapV2Router), "MemeForce: The router already has that address");
        emit UpdateUniswapV2Router(newAddress, address(uniswapV2Router));
        uniswapV2Router = ISwapRouter02(newAddress);
        address _uniswapV2Pair = ISwapFactory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
        uniswapV2Pair = _uniswapV2Pair;
    }

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        isExcludedFromFees[account] = excluded;

        emit ExcludeFromFees(account, excluded);
    }

    function setMarketingWallet(address payable wallet) external onlyOwner{
        require(marketingWalletAddress != address(0), "MemeForce: Can't set marketing wallet to the zero address");
        marketingWalletAddress = wallet;
    }
    
    function setDevWallet(address payable wallet) external onlyOwner{
        require(devWalletAddress != address(0), "MemeForce: Can't set marketing wallet to the zero address");
        devWalletAddress = wallet;
    }
    
    function setLiquidityFee(uint256 value) external onlyOwner {
        liquidityFee = value;
    }

    function setMarketingFee(uint256 value) external onlyOwner {
        marketingFee = value;
    }
    
    function setDevFee(uint256 value) external onlyOwner {
        devFee = value;
    }
    
    function setBlacklistTimeout(uint256 value) external onlyOwner{
        blacklistTimeout = value;
    }
    
    function setMaxTxPermille(uint256 maxTxPermille) external onlyOwner {
        require (maxTxPermille > 0, "MemeForce: Can't set max Tx to 0");
        maxTxAmount = totalSupply() * maxTxPermille / 1000;
    }

    function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
        require(pair != uniswapV2Pair, "MemeForce: The PancakeSwap pair cannot be removed from automatedMarketMakerPairs");

        _setAutomatedMarketMakerPair(pair, value);
    }
    
    function blacklistAddress(address account, bool value) external onlyOwner {
        isBlacklistedUntil[account] = block.timestamp + (value ? blacklistTimeout : 0);
    }
    
    function launch() external onlyOwner {
        launchedAt = block.timestamp;
        tradingOpened = true;
    }
    
    function toggleTrading (bool _tradingOpened) external onlyOwner {
        tradingOpened = _tradingOpened;
    }


    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        require(automatedMarketMakerPairs[pair] != value, "MemeForce: Automated market maker pair is already set to that value");
        automatedMarketMakerPairs[pair] = value;

        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function excludedFromFees (address account) public view onlyOwner returns (bool) {
        return isExcludedFromFees[account];
    }
    
    // Help users who accidentally send tokens to the contract address
    function withdrawOtherTokens (address _token, address _account) external onlyOwner {
        IERC20 token = IERC20(_token);
        uint tokenBalance = token.balanceOf (address(this));
        token.transfer (_account, tokenBalance);
        emit AccidentallySentTokenWithdrawn (_token, _account, tokenBalance);
    }
    
    // Help users who accidentally send ETH to the contract address - this only removes ETH that has been manually transferred to the contract address
    // ETH that is created as part of the liquidity provision process will be sent to the PCS pair address immediately and so cannot be affected by this action
    function withdrawExcessETH (address _account) external onlyOwner {
        uint256 contractETHBalance = address(this).balance;
        
        if (contractETHBalance > 0)
            payable(_account).sendValue(contractETHBalance);
        
        emit AccidentallySentETHWithdrawn (_account, contractETHBalance);
    }

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal override {
        require (tradingOpened || isExcludedFromFees[from], "MemeForce: Trading paused");
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(isBlacklistedUntil[from] < block.timestamp && isBlacklistedUntil[to] < block.timestamp, "MemeForce: Blacklisted address");

        if(amount == 0) {
            super._transfer(from, to, 0);
            return;
        }

		uint256 contractTokenBalance = balanceOf(address(this));
		uint256 totalFees = liquidityFee + marketingFee + devFee;

        bool canSwap = contractTokenBalance >= swapTokensAtAmount && launchedAt + 10 < block.timestamp && tradingOpened;

        if( canSwap &&
            !swapping &&
            !automatedMarketMakerPairs[from] &&
            from != owner() &&
            to != owner()
        ) {
            swapping = true;

            uint256 swapTokens = contractTokenBalance * liquidityFee / totalFees;
            swapAndLiquify(swapTokens);

            uint256 marketingTokens = contractTokenBalance * marketingFee / totalFees;
            swapAndSendToFee(marketingTokens, marketingWalletAddress);
            uint256 devTokens = contractTokenBalance * devFee / totalFees;
            swapAndSendToFee(devTokens, devWalletAddress);
            

            swapping = false;
        }


        bool takeFee = !swapping;

        // if any account belongs to _isExcludedFromFee account then remove the fee
        if (isExcludedFromFees[from] || isExcludedFromFees[to])
            takeFee = false;

        if (takeFee) {
        	uint256 fees = amount * (launchedAt + 10 < block.timestamp ? totalFees : (feeDenominator - 1))/ feeDenominator;
        	
        	if (automatedMarketMakerPairs[to])
        	    fees += amount / 100;
        	
        	amount = amount - fees;
            super._transfer (from, address(this), fees);
        }

        super._transfer (from, to, amount);
    }

    function swapAndSendToFee(uint256 tokens, address feeAddress) private  {
        uint256 newBalance = swapTokensForEth(tokens);
       payable(feeAddress).sendValue (newBalance);
    }

    function swapAndLiquify(uint256 tokens) private {
       // split the contract balance into halves
        uint256 half = tokens / 2;
        uint256 otherHalf = tokens - half;

        // swap tokens for ETH
        uint256 newBalance = swapTokensForEth(half); 

        // add liquidity to uniswap
        addLiquidity(otherHalf, newBalance);

        emit SwapAndLiquify(half, newBalance, otherHalf);
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {

        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // add the liquidity
        (,uint256 ethFromLiquidity,) = uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(0),
            block.timestamp
        );
        if (ethAmount - ethFromLiquidity > 0)
            payable(marketingWalletAddress).sendValue(ethAmount - ethFromLiquidity);
    }

    function swapTokensForEth(uint256 tokenAmount) private returns (uint256) {
        uint256 initialBalance = address(this).balance;
        
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
        
        return (address(this).balance - initialBalance);
    }
}

{
  "compilationTarget": {
    "MemeForce.sol": "MemeForce"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}