Affordable Alpha Pass

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Trees proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];
            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
            }
        }
        return computedHash;
    }
}

// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}



// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
/***
 *     ██████╗ ██████╗ ███╗   ██╗████████╗███████╗██╗  ██╗████████╗
 *    ██╔════╝██╔═══██╗████╗  ██║╚══██╔══╝██╔════╝╚██╗██╔╝╚══██╔══╝
 *    ██║     ██║   ██║██╔██╗ ██║   ██║   █████╗   ╚███╔╝    ██║   
 *    ██║     ██║   ██║██║╚██╗██║   ██║   ██╔══╝   ██╔██╗    ██║   
 *    ╚██████╗╚██████╔╝██║ ╚████║   ██║   ███████╗██╔╝ ██╗   ██║   
 *     ╚═════╝ ╚═════╝ ╚═╝  ╚═══╝   ╚═╝   ╚══════╝╚═╝  ╚═╝   ╚═╝   
 * Re-write of @openzeppelin/contracts/utils/Context.sol
 * 
 *
 * Upgraded stock contract with _msgValue() and _txOrigin() 
 */

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)


pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _msgValue() internal view virtual returns (uint) {
        return msg.value;
    }

    function _txOrigin() internal view virtual returns (address) {
        return tx.origin;
    }
}

// Creator: Chiru Labs

pragma solidity ^0.8.4;

error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintedQueryForZeroAddress();
error BurnedQueryForZeroAddress();
error AuxQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerIndexOutOfBounds();
error OwnerQueryForNonexistentToken();
error TokenIndexOutOfBounds();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error URIQueryForNonexistentToken();

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
 *
 * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 *
 * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Compiler will pack this into a single 256bit word.
    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Keeps track of the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
    }

    // Compiler will pack this into a single 256bit word.
    struct AddressData {
        // Realistically, 2**64-1 is more than enough.
        uint64 balance;
        // Keeps track of mint count with minimal overhead for tokenomics.
        uint64 numberMinted;
        // Keeps track of burn count with minimal overhead for tokenomics.
        uint64 numberBurned;
        // For miscellaneous variable(s) pertaining to the address
        // (e.g. number of whitelist mint slots used).
        // If there are multiple variables, please pack them into a uint64.
        uint64 aux;
    }

    // The tokenId of the next token to be minted.
    uint256 internal _currentIndex;

    // The number of tokens burned.
    uint256 internal _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
    mapping(uint256 => TokenOwnership) internal _ownerships;

    // Mapping owner address to address data
    mapping(address => AddressData) private _addressData;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    /**
     * To change the starting tokenId, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     * @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
     */
    function totalSupply() public view returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than _currentIndex - _startTokenId() times
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view returns (uint256) {
        // Counter underflow is impossible as _currentIndex does not decrement,
        // and it is initialized to _startTokenId()
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return uint256(_addressData[owner].balance);
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        if (owner == address(0)) revert MintedQueryForZeroAddress();
        return uint256(_addressData[owner].numberMinted);
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        if (owner == address(0)) revert BurnedQueryForZeroAddress();
        return uint256(_addressData[owner].numberBurned);
    }

    /**
     * Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        if (owner == address(0)) revert AuxQueryForZeroAddress();
        return _addressData[owner].aux;
    }

    /**
     * Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal {
        if (owner == address(0)) revert AuxQueryForZeroAddress();
        _addressData[owner].aux = aux;
    }

    /**
     * Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around in the collection over time.
     */
    function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
        uint256 curr = tokenId;

        unchecked {
            if (_startTokenId() <= curr && curr < _currentIndex) {
                TokenOwnership memory ownership = _ownerships[curr];
                if (!ownership.burned) {
                    if (ownership.addr != address(0)) {
                        return ownership;
                    }
                    // Invariant:
                    // There will always be an ownership that has an address and is not burned
                    // before an ownership that does not have an address and is not burned.
                    // Hence, curr will not underflow.
                    while (true) {
                        curr--;
                        ownership = _ownerships[curr];
                        if (ownership.addr != address(0)) {
                            return ownership;
                        }
                    }
                }
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view override returns (address) {
        return ownershipOf(tokenId).addr;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public override {
        address owner = ERC721A.ownerOf(tokenId);
        if (to == owner) revert ApprovalToCurrentOwner();

        if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
            revert ApprovalCallerNotOwnerNorApproved();
        }

        _approve(to, tokenId, owner);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public override {
        if (operator == _msgSender()) revert ApproveToCaller();

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        _transfer(from, to, tokenId);
        if (to.isContract() && !_checkContractOnERC721Received(from, to, tokenId, _data)) {
            revert TransferToNonERC721ReceiverImplementer();
        }
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        return _startTokenId() <= tokenId && tokenId < _currentIndex &&
            !_ownerships[tokenId].burned;
    }

    function _safeMint(address to, uint256 quantity) internal {
        _safeMint(to, quantity, '');
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal {
        _mint(to, quantity, _data, true);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _mint(
        address to,
        uint256 quantity,
        bytes memory _data,
        bool safe
    ) internal {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
        // updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
        unchecked {
            _addressData[to].balance += uint64(quantity);
            _addressData[to].numberMinted += uint64(quantity);

            _ownerships[startTokenId].addr = to;
            _ownerships[startTokenId].startTimestamp = uint64(block.timestamp);

            uint256 updatedIndex = startTokenId;
            uint256 end = updatedIndex + quantity;

            if (safe && to.isContract()) {
                do {
                    emit Transfer(address(0), to, updatedIndex);
                    if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (updatedIndex != end);
                // Reentrancy protection
                if (_currentIndex != startTokenId) revert();
            } else {
                do {
                    emit Transfer(address(0), to, updatedIndex++);
                } while (updatedIndex != end);
            }
            _currentIndex = updatedIndex;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) private {
        TokenOwnership memory prevOwnership = ownershipOf(tokenId);

        bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
            isApprovedForAll(prevOwnership.addr, _msgSender()) ||
            getApproved(tokenId) == _msgSender());

        if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
        if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, prevOwnership.addr);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
        unchecked {
            _addressData[from].balance -= 1;
            _addressData[to].balance += 1;

            _ownerships[tokenId].addr = to;
            _ownerships[tokenId].startTimestamp = uint64(block.timestamp);

            // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            if (_ownerships[nextTokenId].addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId < _currentIndex) {
                    _ownerships[nextTokenId].addr = prevOwnership.addr;
                    _ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        TokenOwnership memory prevOwnership = ownershipOf(tokenId);

        _beforeTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, prevOwnership.addr);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
        unchecked {
            _addressData[prevOwnership.addr].balance -= 1;
            _addressData[prevOwnership.addr].numberBurned += 1;

            // Keep track of who burned the token, and the timestamp of burning.
            _ownerships[tokenId].addr = prevOwnership.addr;
            _ownerships[tokenId].startTimestamp = uint64(block.timestamp);
            _ownerships[tokenId].burned = true;

            // If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            if (_ownerships[nextTokenId].addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId < _currentIndex) {
                    _ownerships[nextTokenId].addr = prevOwnership.addr;
                    _ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(prevOwnership.addr, address(0), tokenId);
        _afterTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        address owner
    ) private {
        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
            return retval == IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
     * minting.
     * And also called after one token has been burned.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}
}
/***
 *    ██████╗  █████╗ ██╗   ██╗███╗   ███╗███████╗███╗   ██╗████████╗
 *    ██╔══██╗██╔══██╗╚██╗ ██╔╝████╗ ████║██╔════╝████╗  ██║╚══██╔══╝
 *    ██████╔╝███████║ ╚████╔╝ ██╔████╔██║█████╗  ██╔██╗ ██║   ██║
 *    ██╔═══╝ ██╔══██║  ╚██╔╝  ██║╚██╔╝██║██╔══╝  ██║╚██╗██║   ██║
 *    ██║     ██║  ██║   ██║   ██║ ╚═╝ ██║███████╗██║ ╚████║   ██║
 *    ╚═╝     ╚═╝  ╚═╝   ╚═╝   ╚═╝     ╚═╝╚══════╝╚═╝  ╚═══╝   ╚═╝
 *
 *    ███████╗██████╗ ██╗     ██╗████████╗████████╗███████╗██████╗
 *    ██╔════╝██╔══██╗██║     ██║╚══██╔══╝╚══██╔══╝██╔════╝██╔══██╗
 *    ███████╗██████╔╝██║     ██║   ██║      ██║   █████╗  ██████╔╝
 *    ╚════██║██╔═══╝ ██║     ██║   ██║      ██║   ██╔══╝  ██╔══██╗
 *    ███████║██║     ███████╗██║   ██║      ██║   ███████╗██║  ██║
 *    ╚══════╝╚═╝     ╚══════╝╚═╝   ╚═╝      ╚═╝   ╚══════╝╚═╝  ╚═╝
 * Re-write of @openzeppelin/contracts/finance/PaymentSplitter.sol
 *
 *
 * Edits the release functionality to force release to all addresses added
 * as payees.
 */



pragma solidity ^0.8.0;



error ZeroBalance();
error AddressAlreadyAssigned();
error InvalidShares();
error SharesToZeroAddress();

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 */

abstract contract PaymentSplitter is Context {
    using Counters for Counters.Counter;
    Counters.Counter private _numPayees;

    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;
    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     *
     *  receive() external payable virtual {
     *    emit PaymentReceived(_msgSender(), msg.value);
     *  }
     *
     *  // Fallback function is called when msg.data is not empty
     *  // Added to PaymentSplitter.sol
     *  fallback() external payable {
     *    emit PaymentReceived(_msgSender(), msg.value);
     *  }
     *
     * receive() and fallback() to be handled at final contract
     */

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Releases contract balance to the addresses that are owed funds.
     */
    function _release() internal {
        if (address(this).balance == 0) revert ZeroBalance();
        for (uint256 i = 0; i < _numPayees.current(); i++) {
            address account = payee(i);
            uint256 totalReceived = address(this).balance + _totalReleased;
            uint256 payment = (totalReceived * _shares[account]) /
                _totalShares -
                _released[account];
            _released[account] = _released[account] + payment;
            _totalReleased = _totalReleased + payment;
            Address.sendValue(payable(account), payment);
            emit PaymentReleased(account, payment);
        }
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares to assign the payee.
     */
    function _addPayee(address account, uint256 shares_) internal {
        if (account == address(0)) revert SharesToZeroAddress();
        if (shares_ <= 0) revert InvalidShares();
        if (_shares[account] != 0) revert AddressAlreadyAssigned();
        _numPayees.increment();
        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }
}
/***
 *    ███████╗██╗██████╗       ██████╗  █████╗  █████╗  ██╗
 *    ██╔════╝██║██╔══██╗      ╚════██╗██╔══██╗██╔══██╗███║
 *    █████╗  ██║██████╔╝█████╗ █████╔╝╚██████║╚█████╔╝╚██║
 *    ██╔══╝  ██║██╔═══╝ ╚════╝██╔═══╝  ╚═══██║██╔══██╗ ██║
 *    ███████╗██║██║           ███████╗ █████╔╝╚█████╔╝ ██║
 *    ╚══════╝╚═╝╚═╝           ╚══════╝ ╚════╝  ╚════╝  ╚═╝                                                        
 * Zach Burks, James Morgan, Blaine Malone, James Seibel,
 * "EIP-2981: NFT Royalty Standard,"
 * Ethereum Improvement Proposals, no. 2981, September 2020. [Online serial].
 * Available: https://eips.ethereum.org/EIPS/eip-2981.
 *
 */



pragma solidity >=0.8.0 <0.9.0;

///
/// @dev Interface for the NFT Royalty Standard
///

interface IERC2981 is IERC165 {

  // @notice Called with the sale price to determine how much royalty
  //  is owed and to whom.
  // @param _tokenId - the NFT asset queried for royalty information
  // @param _salePrice - the sale price of the NFT asset specified by _tokenId
  // @return receiver - address of who should be sent the royalty payment
  // @return royaltyAmount - the royalty payment amount for _salePrice
  function royaltyInfo(uint256 _tokenId, uint256 _salePrice) external view returns (address receiver, uint256 royaltyAmount);

}
/***
 *    ███████╗██████╗  ██████╗██████╗  █████╗  █████╗  ██╗                            
 *    ██╔════╝██╔══██╗██╔════╝╚════██╗██╔══██╗██╔══██╗███║                            
 *    █████╗  ██████╔╝██║      █████╔╝╚██████║╚█████╔╝╚██║                            
 *    ██╔══╝  ██╔══██╗██║     ██╔═══╝  ╚═══██║██╔══██╗ ██║                            
 *    ███████╗██║  ██║╚██████╗███████╗ █████╔╝╚█████╔╝ ██║                            
 *    ╚══════╝╚═╝  ╚═╝ ╚═════╝╚══════╝ ╚════╝  ╚════╝  ╚═╝                            
 *                                                                                    
 *     ██████╗ ██████╗ ██╗     ██╗     ███████╗ ██████╗████████╗██╗ ██████╗ ███╗   ██╗
 *    ██╔════╝██╔═══██╗██║     ██║     ██╔════╝██╔════╝╚══██╔══╝██║██╔═══██╗████╗  ██║
 *    ██║     ██║   ██║██║     ██║     █████╗  ██║        ██║   ██║██║   ██║██╔██╗ ██║
 *    ██║     ██║   ██║██║     ██║     ██╔══╝  ██║        ██║   ██║██║   ██║██║╚██╗██║
 *    ╚██████╗╚██████╔╝███████╗███████╗███████╗╚██████╗   ██║   ██║╚██████╔╝██║ ╚████║
 *     ╚═════╝ ╚═════╝ ╚══════╝╚══════╝╚══════╝ ╚═════╝   ╚═╝   ╚═╝ ╚═════╝ ╚═╝  ╚═══╝
 * 
 * 
 *
 * Designed to allow setting a global royalty address along with specified basis points. 
 */



pragma solidity >=0.8.0 <0.9.0;


abstract contract ERC2981Collection is IERC2981 {

  address private royaltyAddress;
  uint256 private royaltyPercent;

  function _setRoyalties(address _receiver, uint256 _percentage) internal {
    royaltyAddress = _receiver;
    royaltyPercent = _percentage;
  }

  // Override for royaltyInfo(uint256, uint256)
  function royaltyInfo(
    uint256 _tokenId,
    uint256 _salePrice
  ) external view override(IERC2981) returns (
    address receiver,
    uint256 royaltyAmount
  ) {
    receiver = royaltyAddress;

    // This sets percentages by price * percentage / 100
    royaltyAmount = _salePrice * royaltyPercent / 100;
  }
}
/***
 *     ██████╗ ██╗    ██╗███╗   ██╗ █████╗ ██████╗ ██╗     ███████╗
 *    ██╔═══██╗██║    ██║████╗  ██║██╔══██╗██╔══██╗██║     ██╔════╝
 *    ██║   ██║██║ █╗ ██║██╔██╗ ██║███████║██████╔╝██║     █████╗  
 *    ██║   ██║██║███╗██║██║╚██╗██║██╔══██║██╔══██╗██║     ██╔══╝  
 *    ╚██████╔╝╚███╔███╔╝██║ ╚████║██║  ██║██████╔╝███████╗███████╗
 *     ╚═════╝  ╚══╝╚══╝ ╚═╝  ╚═══╝╚═╝  ╚═╝╚═════╝ ╚══════╝╚══════╝
 * Re-write of @openzeppelin/contracts/access/Ownable.sol
 * 
 *
 * Upgraded to push/pull and decline compared to original contract
 */


// OpenZeppelin Contracts v4.4.1
// Rewritten for onlyOwner modifier

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (a owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the Owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwner}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the Owner.
 */

abstract contract Ownable is Context {

    address private _Owner;
    address private _newOwner;

    event OwnerTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial Owner.
     */
    constructor() {
        _transferOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current Owner.
     */
    function owner() public view virtual returns (address) {
        return _Owner;
    }

    /**
     * @dev Throws if called by any account other than the Owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Owner: caller is not the Owner");
        _;
    }

    /**
     * @dev Leaves the contract without Owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current Owner.
     *
     * NOTE: Renouncing Ownership will leave the contract without an Owner,
     * thereby removing any functionality that is only available to the Owner.
     */
    function renounceOwner() public virtual onlyOwner {
        _transferOwner(address(0));
    }

    /**
     * @dev Transfers Owner of the contract to a new account (`newOwner`).
     * Can only be called by the current Owner. Now push/pull.
     */
    function transferOwner(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Owner: new Owner is the zero address");
        _newOwner = newOwner;
    }

    /**
     * @dev Accepts Transfer Owner of the contract to a new account (`newOwner`).
     * Can only be called by the new Owner. Pull Accepted.
     */
    function acceptOwner() public virtual {
        require(_newOwner == _msgSender(), "New Owner: new Owner is the only caller");
        _transferOwner(_newOwner);
    }

    /**
     * @dev Declines Transfer Owner of the contract to a new account (`newOwner`).
     * Can only be called by the new Owner. Pull Declined.
     */
    function declineOwner() public virtual {
        require(_newOwner == _msgSender(), "New Owner: new Owner is the only caller");
        _newOwner = address(0);
    }

    /**
     * @dev Transfers Owner of the contract to a new account (`newOwner`).
     * Can only be called by the current Owner. Now push only. Orginal V1 style
     */
    function pushOwner(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Owner: new Owner is the zero address");
        _transferOwner(newOwner);
    }

    /**
     * @dev Transfers Owner of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwner(address newOwner) internal virtual {
        address oldOwner = _Owner;
        _Owner = newOwner;
        emit OwnerTransferred(oldOwner, newOwner);
    }
}
/***
 *    ░█████╗░░█████╗░███╗░░██╗██████╗░██╗░░░██╗  ░█████╗░██████╗░███████╗░█████╗░████████╗░█████╗░██████╗░
 *    ██╔══██╗██╔══██╗████╗░██║██╔══██╗╚██╗░██╔╝  ██╔══██╗██╔══██╗██╔════╝██╔══██╗╚══██╔══╝██╔══██╗██╔══██╗
 *    ██║░░╚═╝███████║██╔██╗██║██║░░██║░╚████╔╝░  ██║░░╚═╝██████╔╝█████╗░░███████║░░░██║░░░██║░░██║██████╔╝
 *    ██║░░██╗██╔══██║██║╚████║██║░░██║░░╚██╔╝░░  ██║░░██╗██╔══██╗██╔══╝░░██╔══██║░░░██║░░░██║░░██║██╔══██╗
 *    ╚█████╔╝██║░░██║██║░╚███║██████╔╝░░░██║░░░  ╚█████╔╝██║░░██║███████╗██║░░██║░░░██║░░░╚█████╔╝██║░░██║
 *    ░╚════╝░╚═╝░░╚═╝╚═╝░░╚══╝╚═════╝░░░░╚═╝░░░  ░╚════╝░╚═╝░░╚═╝╚══════╝╚═╝░░╚═╝░░░╚═╝░░░░╚════╝░╚═╝░░╚═╝
 *
 *
 *
 *
 *  “Growing up, I slowly had this process of realizing that all the things around me that people had told me
 *  were just the natural way things were, the way things always would be, they weren’t natural at all.
 *  They were things that could be changed, and they were things that, more importantly, were wrong and should change,
 *  and once I realized that, there was really no going back.”
 *
 *    ― Aaron Swartz (1986-2013)
 *
 *
 * Version: VARIANT_BASE_NOTPROV_NOTAIRDROP_ERC721A_NOTENUMERABLE_CONTEXTV2
 *          v2.0
 *
 * Purpose: ERC-721 template for no-code users.
 *          Placeholder for pre-reveal information.
 *          Guaranteed mint royalties with PaymentSplitter.
 *          EIP-2981 compliant secondary sale royalty information.
 *          Whitelist functionality. Caps whitelist users and invalidates whitelist users after mint.
 *          Deployable to ETH, AVAX, BNB, MATIC, FANTOM chains.
 *
 */



pragma solidity >=0.8.4 <0.9.0;



error MintingNotActive();
error MintingActive();
error WouldExceedMintSize();
error ExceedsMaxTransactionMints();
error NonExistentToken();
error WhitelistNotRequired();
error WhitelistRequired();
error NotWhitelisted();
error NotEnoughWhitelistSlots();
error ExceedsMaxWhitelistMints();
error WrongPayment();
error InvalidMintSize();

contract CandyCreatorV1A is
    ERC721A,
    ERC2981Collection,
    PaymentSplitter,
    Ownable
{
    // @notice basic state variables
    string private base;
    bool private mintingActive;
    bool private lockedPayees;
    uint256 private maxPublicMints;
    uint256 private mintPrice;
    uint256 private mintSize;
    string private placeholderURI;

    // @notice Whitelist functionality
    bool private whitelistActive;
    bytes32 public whitelistMerkleRoot;
    uint64 private maxWhitelistMints;

    event UpdatedMintPrice(uint256 _old, uint256 _new);
    event UpdatedMintSize(uint256 _old, uint256 _new);
    event UpdatedMaxWhitelistMints(uint256 _old, uint256 _new);
    event UpdatedMaxPublicMints(uint256 _old, uint256 _new);
    event UpdatedMintStatus(bool _old, bool _new);
    event UpdatedRoyalties(address newRoyaltyAddress, uint256 newPercentage);
    event UpdatedWhitelistStatus(bool _old, bool _new);
    event UpdatedPresaleEnd(uint256 _old, uint256 _new);
    event PayeesLocked(bool _status);
    event UpdatedWhitelist(bytes32 _old, bytes32 _new);

    // @notice Contract constructor requires as much information
    // about the contract as possible to avoid unnecessary function calls
    // on the contract post-deployment.
    constructor(
        string memory name,
        string memory symbol,
        string memory _placeholderURI,
        uint256 _mintPrice,
        uint256 _mintSize,
        address _candyWallet,
        bool _multi,
        address[] memory splitAddresses,
        uint256[] memory splitShares,
        bytes32 _whitelistMerkleRoot
    ) ERC721A(name, symbol) {
        placeholderURI = _placeholderURI;
        maxWhitelistMints = 2;
        maxPublicMints = 2;
        mintPrice = _mintPrice;
        mintSize = _mintSize;
        
        if (_whitelistMerkleRoot != 0) {
            whitelistMerkleRoot = _whitelistMerkleRoot;
            enableWhitelist();
        }
        
        addPayee(_candyWallet, 500);
        if (!_multi) {
            addPayee(_msgSender(), 9500);
            lockPayees();
        } else {
            for (uint256 i = 0; i < splitAddresses.length; i++) {
                addPayee(splitAddresses[i], splitShares[i]);
            }
            lockPayees();
        }
    }

    /***
     *    ███╗   ███╗██╗███╗   ██╗████████╗
     *    ████╗ ████║██║████╗  ██║╚══██╔══╝
     *    ██╔████╔██║██║██╔██╗ ██║   ██║
     *    ██║╚██╔╝██║██║██║╚██╗██║   ██║
     *    ██║ ╚═╝ ██║██║██║ ╚████║   ██║
     *    ╚═╝     ╚═╝╚═╝╚═╝  ╚═══╝   ╚═╝
     */

    // @notice this is the mint function, mint Fees in ERC20,
    //  requires amount * mintPrice to be sent by caller
    // @param uint amount - number of tokens minted
    function whitelistMint(bytes32[] calldata merkleProof, uint64 amount)
        external
        payable
    {
        // @notice using Checks-Effects-Interactions
        if (!mintingActive) revert MintingNotActive();
        if (!whitelistActive) revert WhitelistNotRequired();
        if (_msgValue() != mintPrice * amount) revert WrongPayment();
        if (totalSupply() + amount > mintSize) revert WouldExceedMintSize();
        if (amount > maxWhitelistMints) revert ExceedsMaxWhitelistMints();
        if (
            !MerkleProof.verify(
                merkleProof,
                whitelistMerkleRoot,
                keccak256(abi.encodePacked(_msgSender()))
            )
        ) revert NotWhitelisted();
        uint64 numWhitelistMinted = _getAux(_msgSender()) + amount;
        if (numWhitelistMinted > maxWhitelistMints)
            revert NotEnoughWhitelistSlots();
        _safeMint(_msgSender(), amount);
        _setAux(_msgSender(), numWhitelistMinted);
    }

    // @notice this is the mint function, mint Fees in ERC20,
    //  requires amount * mintPrice to be sent by caller
    // @param uint amount - number of tokens minted
    function publicMint(uint256 amount) external payable {
        if (whitelistActive) revert WhitelistRequired();
        if (!mintingActive) revert MintingNotActive();
        if (_msgValue() != mintPrice * amount) revert WrongPayment();
        if (totalSupply() + amount > mintSize) revert WouldExceedMintSize();
        if (amount > maxPublicMints) revert ExceedsMaxTransactionMints();
        _safeMint(_msgSender(), amount);
    }

    /***
     *    ██████╗░░█████╗░██╗░░░██╗███╗░░░███╗███████╗███╗░░██╗████████╗
     *    ██╔══██╗██╔══██╗╚██╗░██╔╝████╗░████║██╔════╝████╗░██║╚══██╔══╝
     *    ██████╔╝███████║░╚████╔╝░██╔████╔██║█████╗░░██╔██╗██║░░░██║░░░
     *    ██╔═══╝░██╔══██║░░╚██╔╝░░██║╚██╔╝██║██╔══╝░░██║╚████║░░░██║░░░
     *    ██║░░░░░██║░░██║░░░██║░░░██║░╚═╝░██║███████╗██║░╚███║░░░██║░░░
     *    ╚═╝░░░░░╚═╝░░╚═╝░░░╚═╝░░░╚═╝░░░░░╚═╝╚══════╝╚═╝░░╚══╝░░░╚═╝░░░
     * This section pertains to mint fees, royalties, and fund release.
     */

    // Function to receive ether, msg.data must be empty
    receive() external payable {
        // From PaymentSplitter.sol
        emit PaymentReceived(_msgSender(), _msgValue());
    }

    // Function to receive ether, msg.data is not empty
    fallback() external payable {
        // From PaymentSplitter.sol
        emit PaymentReceived(_msgSender(), _msgValue());
    }

    // @notice will release funds from the contract to the addresses
    // owed funds as passed to constructor
    function release() external onlyOwner {
        _release();
    }

    // @notice this will use internal functions to set EIP 2981
    //  found in IERC2981.sol and used by ERC2981Collections.sol
    // @param address _royaltyAddress - Address for all royalties to go to
    // @param uint256 _percentage - Precentage in whole number of comission
    //  of secondary sales
    function setRoyaltyInfo(address _royaltyAddress, uint256 _percentage)
        public
        onlyOwner
    {
        _setRoyalties(_royaltyAddress, _percentage);
        emit UpdatedRoyalties(_royaltyAddress, _percentage);
    }

    // @notice this will set the fees required to mint using
    //  publicMint(), must enter in wei. So 1 ETH = 10**18.
    // @param uint256 _newFee - fee you set, if ETH 10**18, if
    //  an ERC20 use token's decimals in calculation
    function setMintPrice(uint256 _newFee) public onlyOwner {
        uint256 oldFee = mintPrice;
        mintPrice = _newFee;
        emit UpdatedMintPrice(oldFee, mintPrice);
    }

    // @notice will add an address to PaymentSplitter by owner role
    // @param address newAddy - address to recieve payments
    // @param uint newShares - number of shares they recieve
    function addPayee(address newAddy, uint256 newShares) private {
        require(!lockedPayees, "Can not set, payees locked");
        _addPayee(newAddy, newShares);
    }

    // @notice Will lock the ability to add further payees on PaymentSplitter.sol
    function lockPayees() private {
        require(!lockedPayees, "Can not set, payees locked");
        lockedPayees = true;
        emit PayeesLocked(lockedPayees);
    }

    /***
     *
     *    ░█████╗░██████╗░███╗░░░███╗██╗███╗░░██╗
     *    ██╔══██╗██╔══██╗████╗░████║██║████╗░██║
     *    ███████║██║░░██║██╔████╔██║██║██╔██╗██║
     *    ██╔══██║██║░░██║██║╚██╔╝██║██║██║╚████║
     *    ██║░░██║██████╔╝██║░╚═╝░██║██║██║░╚███║
     *    ╚═╝░░╚═╝╚═════╝░╚═╝░░░░░╚═╝╚═╝╚═╝░░╚══╝
     * This section pertains to to basic contract administration tasks.
     */

    // @notice this will enable publicMint()
    function enableMinting() external onlyOwner {
        if (mintingActive) revert MintingActive();
        bool old = mintingActive;
        mintingActive = true;
        emit UpdatedMintStatus(old, mintingActive);
    }

    // @notice this will disable publicMint()
    function disableMinting() external onlyOwner {
        if (!mintingActive) revert MintingNotActive();
        bool old = mintingActive;
        mintingActive = false;
        emit UpdatedMintStatus(old, mintingActive);
    }

    // @notice this will enable whitelist or "if" in publicMint()
    function enableWhitelist() public onlyOwner {
        if (whitelistActive) revert WhitelistRequired();
        bool old = whitelistActive;
        whitelistActive = true;
        emit UpdatedWhitelistStatus(old, whitelistActive);
    }

    // @notice this will disable whitelist or "else" in publicMint()
    function disableWhitelist() external onlyOwner {
        if (!whitelistActive) revert WhitelistNotRequired();
        bool old = whitelistActive;
        whitelistActive = false;
        emit UpdatedWhitelistStatus(old, whitelistActive);
    }

    // @notice this will set a new Merkle root used to verify whitelist membership
    // together with a proof submitted to the mint function
    // @param bytes32 _merkleRoot - generated merkleRoot hash
    function setWhitelistMerkleRoot(bytes32 _merkleRoot) public onlyOwner {
        bytes32 old = whitelistMerkleRoot;
        whitelistMerkleRoot = _merkleRoot;
        emit UpdatedWhitelist(old, whitelistMerkleRoot);
    }

    // @notice this will set the maximum number of tokens a whitelisted user can mint.
    // @param uint256 _amount - max amount of tokens
    function setMaxWhitelistMints(uint64 _amount) public onlyOwner {
        uint256 oldAmount = maxWhitelistMints;
        maxWhitelistMints = _amount;
        emit UpdatedMaxWhitelistMints(oldAmount, maxWhitelistMints);
    }

    // @notice this will set the maximum number of tokens a single address can mint at a time
    // during the public mint period. Keep in mind that user will be able to transfer their tokens
    // to a different address, and continue minting this amount of tokens on each transaction.
    // If you wish to prevent this, use the whitelist.
    // @param uint256 _amount - max amount of tokens
    function setMaxPublicMints(uint256 _amount) public onlyOwner {
        uint256 oldAmount = maxPublicMints;
        maxPublicMints = _amount;
        emit UpdatedMaxPublicMints(oldAmount, maxWhitelistMints);
    }

    // @notice this updates the base URI for the token metadata
    // it does not emit an event so that it can be set invisibly to purchasers
    // and avoid token sniping
    // @param string _ - max amount of tokens
    function setBaseURI(string memory baseURI) public onlyOwner {
        base = baseURI;
    }

    // @notice will set mint size by owner role
    // @param uint256 _amount - set number to mint
    function setMintSize(uint256 _amount) public onlyOwner {
        if (_amount < totalSupply()) revert InvalidMintSize();
        uint256 old = mintSize;
        mintSize = _amount;
        emit UpdatedMintSize(old, mintSize);
    }

    /***
     *    ██████╗░██╗░░░██╗██████╗░██╗░░░░░██╗░█████╗░  ██╗░░░██╗██╗███████╗░██╗░░░░░░░██╗░██████╗
     *    ██╔══██╗██║░░░██║██╔══██╗██║░░░░░██║██╔══██╗  ██║░░░██║██║██╔════╝░██║░░██╗░░██║██╔════╝
     *    ██████╔╝██║░░░██║██████╦╝██║░░░░░██║██║░░╚═╝  ╚██╗░██╔╝██║█████╗░░░╚██╗████╗██╔╝╚█████╗░
     *    ██╔═══╝░██║░░░██║██╔══██╗██║░░░░░██║██║░░██╗  ░╚████╔╝░██║██╔══╝░░░░████╔═████║░░╚═══██╗
     *    ██║░░░░░╚██████╔╝██████╦╝███████╗██║╚█████╔╝  ░░╚██╔╝░░██║███████╗░░╚██╔╝░╚██╔╝░██████╔╝
     *    ╚═╝░░░░░░╚═════╝░╚═════╝░╚══════╝╚═╝░╚════╝░  ░░░╚═╝░░░╚═╝╚══════╝░░░╚═╝░░░╚═╝░░╚═════╝░
     */
    // @notice will return whether minting is enabled
    function mintStatus() external view returns (bool) {
        return mintingActive;
    }

    // @notice will return whitelist status of Minter
    function whitelistStatus() external view returns (bool) {
        return whitelistActive;
    }

    // @notice will return minting fees
    function mintingFee() external view returns (uint256) {
        return mintPrice;
    }

    // @notice will return whitelist status of Minter
    function whitelistMaxMints() external view returns (uint256) {
        return maxWhitelistMints;
    }

    // @notice will return maximum tokens that are allowed to be minted during a single transaction
    // during the whitelist period
    function publicMaxMints() external view returns (uint256) {
        return maxPublicMints;
    }

    // @notice this is a public getter for ETH balance on contract
    function getBalance() external view returns (uint256) {
        return address(this).balance;
    }

    // @notice will return the planned size of the collection
    function collectionSize() external view returns (uint256) {
        return mintSize;
    }

    /***
     *    ░█████╗░██╗░░░██╗███████╗██████╗░██████╗░██╗██████╗░███████╗
     *    ██╔══██╗██║░░░██║██╔════╝██╔══██╗██╔══██╗██║██╔══██╗██╔════╝
     *    ██║░░██║╚██╗░██╔╝█████╗░░██████╔╝██████╔╝██║██║░░██║█████╗░░
     *    ██║░░██║░╚████╔╝░██╔══╝░░██╔══██╗██╔══██╗██║██║░░██║██╔══╝░░
     *    ╚█████╔╝░░╚██╔╝░░███████╗██║░░██║██║░░██║██║██████╔╝███████╗
     *    ░╚════╝░░░░╚═╝░░░╚══════╝╚═╝░░╚═╝╚═╝░░╚═╝╚═╝╚═════╝░╚══════╝
     */

    // @notice Solidity required override for _baseURI(), if you wish to
    //  be able to set from API -> IPFS or vice versa using setBaseURI(string)
    function _baseURI() internal view override returns (string memory) {
        return base;
    }

    // @notice Override for ERC721A _startTokenId to change from default 0 -> 1
    function _startTokenId() internal pure override returns (uint256) {
        return 1;
    }

    // @notice Override for ERC721A tokenURI
    function tokenURI(uint256 tokenId)
        public
        view
        virtual
        override
        returns (string memory)
    {
        if (!_exists(tokenId)) revert NonExistentToken();
        string memory baseURI = _baseURI();
        return
            bytes(baseURI).length > 0
                ? string(
                    abi.encodePacked(
                        baseURI,
                        "/",
                        Strings.toString(tokenId),
                        ".json"
                    )
                )
                : placeholderURI;
    }

    // @notice solidity required override for supportsInterface(bytes4)
    // @param bytes4 interfaceId - bytes4 id per interface or contract
    // calculated by ERC165 standards automatically
    function supportsInterface(bytes4 interfaceId)
        public
        view
        override(ERC721A, IERC165)
        returns (bool)
    {
        return (interfaceId == type(ERC2981Collection).interfaceId ||
            interfaceId == type(PaymentSplitter).interfaceId ||
            interfaceId == type(Ownable).interfaceId ||
            super.supportsInterface(interfaceId));
    }
}

{
  "compilationTarget": {
    "CandyCreatorV1A.sol": "CandyCreatorV1A"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}