// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.17;

import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts/interfaces/IERC1271.sol";
import {SignatureChecker} from "../dependencies/openzeppelin/contracts/SignatureChecker.sol";
import "./base-account-abstraction/core/BaseAccount.sol";
import "./callback/TokenCallbackHandler.sol";

/**
 * Address Owned Account.
 *  this is sample minimal account.
 *  has execute, eth handling methods
 *  has a single signer that can send requests through the entryPoint.
 */
contract Account is BaseAccount, TokenCallbackHandler, IERC1271, Initializable {
    using ECDSA for bytes32;

    address public owner;

    IEntryPoint private immutable _entryPoint;

    event AccountInitialized(
        IEntryPoint indexed entryPoint,
        address indexed owner
    );

    modifier onlyOwner() {
        _onlyOwner();
        _;
    }

    /// @inheritdoc BaseAccount
    function entryPoint() public view virtual override returns (IEntryPoint) {
        return _entryPoint;
    }

    // solhint-disable-next-line no-empty-blocks
    receive() external payable {}

    constructor(IEntryPoint anEntryPoint) {
        _entryPoint = anEntryPoint;
        _disableInitializers();
    }

    function _onlyOwner() internal view {
        //directly from EOA owner, or through the account itself (which gets redirected through execute())
        require(
            msg.sender == owner || msg.sender == address(this),
            "only owner"
        );
    }

    /**
     * execute a transaction (called directly from owner, or by entryPoint)
     */
    function execute(
        address dest,
        uint256 value,
        bytes calldata func
    ) external {
        _requireFromEntryPointOrOwner();

        _call(dest, value, func);
    }

    /**
     * execute a sequence of transactions
     */
    function executeBatch(
        address[] calldata dest,
        uint256[] calldata value,
        bytes[] calldata func
    ) external {
        _requireFromEntryPointOrOwner();

        require(
            dest.length == func.length &&
                (value.length == 0 || value.length == func.length),
            "wrong array lengths"
        );
        if (value.length == 0) {
            for (uint256 i = 0; i < dest.length; i++) {
                _call(dest[i], 0, func[i]);
            }
        } else {
            for (uint256 i = 0; i < dest.length; i++) {
                _call(dest[i], value[i], func[i]);
            }
        }
    }

    /**
     * @dev The _entryPoint member is immutable, to reduce gas consumption.  To upgrade EntryPoint,
     * a new implementation of SimpleAccount must be deployed with the new EntryPoint address, then upgrading
     * the implementation by calling `upgradeTo()`
     */
    function initialize(address anOwner) public virtual initializer {
        _initialize(anOwner);
    }

    function _initialize(address anOwner) internal virtual {
        owner = anOwner;
        emit AccountInitialized(_entryPoint, owner);
    }

    // Require the function call went through EntryPoint or owner
    function _requireFromEntryPointOrOwner() internal view {
        require(
            msg.sender == address(entryPoint()) || msg.sender == owner,
            "account: not Owner or EntryPoint"
        );
    }

    /// implement template method of BaseAccount
    function _validateSignature(
        UserOperation calldata userOp,
        bytes32 userOpHash
    ) internal virtual override returns (uint256 validationData) {
        bytes32 hash = userOpHash;

        address curOwner = owner;
        if (curOwner.code.length == 0) {
            hash = userOpHash.toEthSignedMessageHash();
        }

        bool isValid = SignatureChecker.isValidSignatureNow(
            curOwner,
            hash,
            userOp.signature
        );

        if (isValid) {
            return 0;
        }

        return SIG_VALIDATION_FAILED;
    }

    function isValidSignature(
        bytes32 hash,
        bytes memory signature
    ) external view returns (bytes4) {
        bool isValid = SignatureChecker.isValidSignatureNow(
            owner,
            hash,
            signature
        );

        if (isValid) {
            return IERC1271.isValidSignature.selector;
        }

        return "";
    }

    function _call(address target, uint256 value, bytes memory data) internal {
        (bool success, bytes memory result) = target.call{value: value}(data);
        if (!success) {
            assembly {
                revert(add(result, 32), mload(result))
            }
        }
    }

    /**
     * check current account deposit in the entryPoint
     */
    function getDeposit() public view returns (uint256) {
        return entryPoint().balanceOf(address(this));
    }

    /**
     * deposit more funds for this account in the entryPoint
     */
    function addDeposit() public payable {
        entryPoint().depositTo{value: msg.value}(address(this));
    }

    /**
     * withdraw value from the account's deposit
     * @param withdrawAddress target to send to
     * @param amount to withdraw
     */
    function withdrawDepositTo(
        address payable withdrawAddress,
        uint256 amount
    ) public onlyOwner {
        entryPoint().withdrawTo(withdrawAddress, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

/* solhint-disable avoid-low-level-calls */
/* solhint-disable no-empty-blocks */

import "../interfaces/IAccount.sol";
import "../interfaces/IEntryPoint.sol";

/**
 * Basic account implementation.
 * this contract provides the basic logic for implementing the IAccount interface  - validateUserOp
 * specific account implementation should inherit it and provide the account-specific logic
 */
abstract contract BaseAccount is IAccount {
    //return value in case of signature failure, with no time-range.
    // equivalent to _packValidationData(true,0,0);
    uint256 internal constant SIG_VALIDATION_FAILED = 1;

    /**
     * Return the account nonce.
     * This method returns the next sequential nonce.
     * For a nonce of a specific key, use `entrypoint.getNonce(account, key)`
     */
    function getNonce() public view virtual returns (uint256) {
        return entryPoint().getNonce(address(this), 0);
    }

    /**
     * return the entryPoint used by this account.
     * subclass should return the current entryPoint used by this account.
     */
    function entryPoint() public view virtual returns (IEntryPoint);

    /**
     * Validate user's signature and nonce.
     * subclass doesn't need to override this method. Instead, it should override the specific internal validation methods.
     */
    function validateUserOp(
        UserOperation calldata userOp,
        bytes32 userOpHash,
        uint256 missingAccountFunds
    ) external virtual override returns (uint256 validationData) {
        _requireFromEntryPoint();
        validationData = _validateSignature(userOp, userOpHash);
        _validateNonce(userOp.nonce);
        _payPrefund(missingAccountFunds);
    }

    /**
     * ensure the request comes from the known entrypoint.
     */
    function _requireFromEntryPoint() internal view virtual {
        require(
            msg.sender == address(entryPoint()),
            "account: not from EntryPoint"
        );
    }

    /**
     * validate the signature is valid for this message.
     * @param userOp validate the userOp.signature field
     * @param userOpHash convenient field: the hash of the request, to check the signature against
     *          (also hashes the entrypoint and chain id)
     * @return validationData signature and time-range of this operation
     *      <20-byte> sigAuthorizer - 0 for valid signature, 1 to mark signature failure,
     *         otherwise, an address of an "authorizer" contract.
     *      <6-byte> validUntil - last timestamp this operation is valid. 0 for "indefinite"
     *      <6-byte> validAfter - first timestamp this operation is valid
     *      If the account doesn't use time-range, it is enough to return SIG_VALIDATION_FAILED value (1) for signature failure.
     *      Note that the validation code cannot use block.timestamp (or block.number) directly.
     */
    function _validateSignature(
        UserOperation calldata userOp,
        bytes32 userOpHash
    ) internal virtual returns (uint256 validationData);

    /**
     * Validate the nonce of the UserOperation.
     * This method may validate the nonce requirement of this account.
     * e.g.
     * To limit the nonce to use sequenced UserOps only (no "out of order" UserOps):
     *      `require(nonce < type(uint64).max)`
     * For a hypothetical account that *requires* the nonce to be out-of-order:
     *      `require(nonce & type(uint64).max == 0)`
     *
     * The actual nonce uniqueness is managed by the EntryPoint, and thus no other
     * action is needed by the account itself.
     *
     * @param nonce to validate
     *
     * solhint-disable-next-line no-empty-blocks
     */
    function _validateNonce(uint256 nonce) internal view virtual {}

    /**
     * sends to the entrypoint (msg.sender) the missing funds for this transaction.
     * subclass MAY override this method for better funds management
     * (e.g. send to the entryPoint more than the minimum required, so that in future transactions
     * it will not be required to send again)
     * @param missingAccountFunds the minimum value this method should send the entrypoint.
     *  this value MAY be zero, in case there is enough deposit, or the userOp has a paymaster.
     */
    function _payPrefund(uint256 missingAccountFunds) internal virtual {
        if (missingAccountFunds != 0) {
            (bool success, ) = payable(msg.sender).call{
                value: missingAccountFunds,
                gas: type(uint256).max
            }("");
            (success);
            //ignore failure (its EntryPoint's job to verify, not account.)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "./Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

import {UserOperation} from "../utils/UserOperation.sol";

interface IAccount {
    /**
     * Validate user's signature and nonce
     * the entryPoint will make the call to the recipient only if this validation call returns successfully.
     * signature failure should be reported by returning SIG_VALIDATION_FAILED (1).
     * This allows making a "simulation call" without a valid signature
     * Other failures (e.g. nonce mismatch, or invalid signature format) should still revert to signal failure.
     *
     * @dev Must validate caller is the entryPoint.
     *      Must validate the signature and nonce
     * @param userOp the operation that is about to be executed.
     * @param userOpHash hash of the user's request data. can be used as the basis for signature.
     * @param missingAccountFunds missing funds on the account's deposit in the entrypoint.
     *      This is the minimum amount to transfer to the sender(entryPoint) to be able to make the call.
     *      The excess is left as a deposit in the entrypoint, for future calls.
     *      can be withdrawn anytime using "entryPoint.withdrawTo()"
     *      In case there is a paymaster in the request (or the current deposit is high enough), this value will be zero.
     * @return validationData packaged ValidationData structure. use `_packValidationData` and `_unpackValidationData` to encode and decode
     *      <20-byte> sigAuthorizer - 0 for valid signature, 1 to mark signature failure,
     *         otherwise, an address of an "authorizer" contract.
     *      <6-byte> validUntil - last timestamp this operation is valid. 0 for "indefinite"
     *      <6-byte> validAfter - first timestamp this operation is valid
     *      If an account doesn't use time-range, it is enough to return SIG_VALIDATION_FAILED value (1) for signature failure.
     *      Note that the validation code cannot use block.timestamp (or block.number) directly.
     */
    function validateUserOp(
        UserOperation calldata userOp,
        bytes32 userOpHash,
        uint256 missingAccountFunds
    ) external returns (uint256 validationData);
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

import {UserOperation} from "../utils/UserOperation.sol";

/**
 * Aggregated Signatures validator.
 */
interface IAggregator {
    /**
     * validate aggregated signature.
     * revert if the aggregated signature does not match the given list of operations.
     */
    function validateSignatures(
        UserOperation[] calldata userOps,
        bytes calldata signature
    ) external view;

    /**
     * validate signature of a single userOp
     * This method is should be called by bundler after EntryPoint.simulateValidation() returns (reverts) with ValidationResultWithAggregation
     * First it validates the signature over the userOp. Then it returns data to be used when creating the handleOps.
     * @param userOp the userOperation received from the user.
     * @return sigForUserOp the value to put into the signature field of the userOp when calling handleOps.
     *    (usually empty, unless account and aggregator support some kind of "multisig"
     */
    function validateUserOpSignature(UserOperation calldata userOp)
        external
        view
        returns (bytes memory sigForUserOp);

    /**
     * aggregate multiple signatures into a single value.
     * This method is called off-chain to calculate the signature to pass with handleOps()
     * bundler MAY use optimized custom code perform this aggregation
     * @param userOps array of UserOperations to collect the signatures from.
     * @return aggregatedSignature the aggregated signature
     */
    function aggregateSignatures(UserOperation[] calldata userOps)
        external
        view
        returns (bytes memory aggregatedSignature);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 *
 * _Available since v4.1._
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC777/IERC777Recipient.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
 *
 * Accounts can be notified of {IERC777} tokens being sent to them by having a
 * contract implement this interface (contract holders can be their own
 * implementer) and registering it on the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
 *
 * See {IERC1820Registry} and {ERC1820Implementer}.
 */
interface IERC777Recipient {
    /**
     * @dev Called by an {IERC777} token contract whenever tokens are being
     * moved or created into a registered account (`to`). The type of operation
     * is conveyed by `from` being the zero address or not.
     *
     * This call occurs _after_ the token contract's state is updated, so
     * {IERC777-balanceOf}, etc., can be used to query the post-operation state.
     *
     * This function may revert to prevent the operation from being executed.
     */
    function tokensReceived(
        address operator,
        address from,
        address to,
        uint256 amount,
        bytes calldata userData,
        bytes calldata operatorData
    ) external;
}

/**
 ** Account-Abstraction (EIP-4337) singleton EntryPoint implementation.
 ** Only one instance required on each chain.
 **/
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

/* solhint-disable avoid-low-level-calls */
/* solhint-disable no-inline-assembly */
/* solhint-disable reason-string */

import {UserOperation} from "../utils/UserOperation.sol";
import "./IStakeManager.sol";
import "./IAggregator.sol";
import "./INonceManager.sol";

interface IEntryPoint is IStakeManager, INonceManager {
    /***
     * An event emitted after each successful request
     * @param userOpHash - unique identifier for the request (hash its entire content, except signature).
     * @param sender - the account that generates this request.
     * @param paymaster - if non-null, the paymaster that pays for this request.
     * @param nonce - the nonce value from the request.
     * @param success - true if the sender transaction succeeded, false if reverted.
     * @param actualGasCost - actual amount paid (by account or paymaster) for this UserOperation.
     * @param actualGasUsed - total gas used by this UserOperation (including preVerification, creation, validation and execution).
     */
    event UserOperationEvent(
        bytes32 indexed userOpHash,
        address indexed sender,
        address indexed paymaster,
        uint256 nonce,
        bool success,
        uint256 actualGasCost,
        uint256 actualGasUsed
    );

    /**
     * account "sender" was deployed.
     * @param userOpHash the userOp that deployed this account. UserOperationEvent will follow.
     * @param sender the account that is deployed
     * @param factory the factory used to deploy this account (in the initCode)
     * @param paymaster the paymaster used by this UserOp
     */
    event AccountDeployed(
        bytes32 indexed userOpHash,
        address indexed sender,
        address factory,
        address paymaster
    );

    /**
     * An event emitted if the UserOperation "callData" reverted with non-zero length
     * @param userOpHash the request unique identifier.
     * @param sender the sender of this request
     * @param nonce the nonce used in the request
     * @param revertReason - the return bytes from the (reverted) call to "callData".
     */
    event UserOperationRevertReason(
        bytes32 indexed userOpHash,
        address indexed sender,
        uint256 nonce,
        bytes revertReason
    );

    /**
     * an event emitted by handleOps(), before starting the execution loop.
     * any event emitted before this event, is part of the validation.
     */
    event BeforeExecution();

    /**
     * signature aggregator used by the following UserOperationEvents within this bundle.
     */
    event SignatureAggregatorChanged(address indexed aggregator);

    /**
     * a custom revert error of handleOps, to identify the offending op.
     *  NOTE: if simulateValidation passes successfully, there should be no reason for handleOps to fail on it.
     *  @param opIndex - index into the array of ops to the failed one (in simulateValidation, this is always zero)
     *  @param reason - revert reason
     *      The string starts with a unique code "AAmn", where "m" is "1" for factory, "2" for account and "3" for paymaster issues,
     *      so a failure can be attributed to the correct entity.
     *   Should be caught in off-chain handleOps simulation and not happen on-chain.
     *   Useful for mitigating DoS attempts against batchers or for troubleshooting of factory/account/paymaster reverts.
     */
    error FailedOp(uint256 opIndex, string reason);

    /**
     * error case when a signature aggregator fails to verify the aggregated signature it had created.
     */
    error SignatureValidationFailed(address aggregator);

    /**
     * Successful result from simulateValidation.
     * @param returnInfo gas and time-range returned values
     * @param senderInfo stake information about the sender
     * @param factoryInfo stake information about the factory (if any)
     * @param paymasterInfo stake information about the paymaster (if any)
     */
    error ValidationResult(
        ReturnInfo returnInfo,
        StakeInfo senderInfo,
        StakeInfo factoryInfo,
        StakeInfo paymasterInfo
    );

    /**
     * Successful result from simulateValidation, if the account returns a signature aggregator
     * @param returnInfo gas and time-range returned values
     * @param senderInfo stake information about the sender
     * @param factoryInfo stake information about the factory (if any)
     * @param paymasterInfo stake information about the paymaster (if any)
     * @param aggregatorInfo signature aggregation info (if the account requires signature aggregator)
     *      bundler MUST use it to verify the signature, or reject the UserOperation
     */
    error ValidationResultWithAggregation(
        ReturnInfo returnInfo,
        StakeInfo senderInfo,
        StakeInfo factoryInfo,
        StakeInfo paymasterInfo,
        AggregatorStakeInfo aggregatorInfo
    );

    /**
     * return value of getSenderAddress
     */
    error SenderAddressResult(address sender);

    /**
     * return value of simulateHandleOp
     */
    error ExecutionResult(
        uint256 preOpGas,
        uint256 paid,
        uint48 validAfter,
        uint48 validUntil,
        bool targetSuccess,
        bytes targetResult
    );

    //UserOps handled, per aggregator
    struct UserOpsPerAggregator {
        UserOperation[] userOps;
        // aggregator address
        IAggregator aggregator;
        // aggregated signature
        bytes signature;
    }

    /**
     * Execute a batch of UserOperation.
     * no signature aggregator is used.
     * if any account requires an aggregator (that is, it returned an aggregator when
     * performing simulateValidation), then handleAggregatedOps() must be used instead.
     * @param ops the operations to execute
     * @param beneficiary the address to receive the fees
     */
    function handleOps(
        UserOperation[] calldata ops,
        address payable beneficiary
    ) external;

    /**
     * Execute a batch of UserOperation with Aggregators
     * @param opsPerAggregator the operations to execute, grouped by aggregator (or address(0) for no-aggregator accounts)
     * @param beneficiary the address to receive the fees
     */
    function handleAggregatedOps(
        UserOpsPerAggregator[] calldata opsPerAggregator,
        address payable beneficiary
    ) external;

    /**
     * generate a request Id - unique identifier for this request.
     * the request ID is a hash over the content of the userOp (except the signature), the entrypoint and the chainid.
     */
    function getUserOpHash(UserOperation calldata userOp)
        external
        view
        returns (bytes32);

    /**
     * Simulate a call to account.validateUserOp and paymaster.validatePaymasterUserOp.
     * @dev this method always revert. Successful result is ValidationResult error. other errors are failures.
     * @dev The node must also verify it doesn't use banned opcodes, and that it doesn't reference storage outside the account's data.
     * @param userOp the user operation to validate.
     */
    function simulateValidation(UserOperation calldata userOp) external;

    /**
     * gas and return values during simulation
     * @param preOpGas the gas used for validation (including preValidationGas)
     * @param prefund the required prefund for this operation
     * @param sigFailed validateUserOp's (or paymaster's) signature check failed
     * @param validAfter - first timestamp this UserOp is valid (merging account and paymaster time-range)
     * @param validUntil - last timestamp this UserOp is valid (merging account and paymaster time-range)
     * @param paymasterContext returned by validatePaymasterUserOp (to be passed into postOp)
     */
    struct ReturnInfo {
        uint256 preOpGas;
        uint256 prefund;
        bool sigFailed;
        uint48 validAfter;
        uint48 validUntil;
        bytes paymasterContext;
    }

    /**
     * returned aggregated signature info.
     * the aggregator returned by the account, and its current stake.
     */
    struct AggregatorStakeInfo {
        address aggregator;
        StakeInfo stakeInfo;
    }

    /**
     * Get counterfactual sender address.
     *  Calculate the sender contract address that will be generated by the initCode and salt in the UserOperation.
     * this method always revert, and returns the address in SenderAddressResult error
     * @param initCode the constructor code to be passed into the UserOperation.
     */
    function getSenderAddress(bytes memory initCode) external;

    /**
     * simulate full execution of a UserOperation (including both validation and target execution)
     * this method will always revert with "ExecutionResult".
     * it performs full validation of the UserOperation, but ignores signature error.
     * an optional target address is called after the userop succeeds, and its value is returned
     * (before the entire call is reverted)
     * Note that in order to collect the the success/failure of the target call, it must be executed
     * with trace enabled to track the emitted events.
     * @param op the UserOperation to simulate
     * @param target if nonzero, a target address to call after userop simulation. If called, the targetSuccess and targetResult
     *        are set to the return from that call.
     * @param targetCallData callData to pass to target address
     */
    function simulateHandleOp(
        UserOperation calldata op,
        address target,
        bytes calldata targetCallData
    ) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

interface INonceManager {
    /**
     * Return the next nonce for this sender.
     * Within a given key, the nonce values are sequenced (starting with zero, and incremented by one on each userop)
     * But UserOp with different keys can come with arbitrary order.
     *
     * @param sender the account address
     * @param key the high 192 bit of the nonce
     * @return nonce a full nonce to pass for next UserOp with this sender.
     */
    function getNonce(address sender, uint192 key)
        external
        view
        returns (uint256 nonce);

    /**
     * Manually increment the nonce of the sender.
     * This method is exposed just for completeness..
     * Account does NOT need to call it, neither during validation, nor elsewhere,
     * as the EntryPoint will update the nonce regardless.
     * Possible use-case is call it with various keys to "initialize" their nonces to one, so that future
     * UserOperations will not pay extra for the first transaction with a given key.
     */
    function incrementNonce(uint192 key) external;
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.10;

/**
 * manage deposits and stakes.
 * deposit is just a balance used to pay for UserOperations (either by a paymaster or an account)
 * stake is value locked for at least "unstakeDelay" by the staked entity.
 */
interface IStakeManager {
    event Deposited(address indexed account, uint256 totalDeposit);

    event Withdrawn(
        address indexed account,
        address withdrawAddress,
        uint256 amount
    );

    /// Emitted when stake or unstake delay are modified
    event StakeLocked(
        address indexed account,
        uint256 totalStaked,
        uint256 unstakeDelaySec
    );

    /// Emitted once a stake is scheduled for withdrawal
    event StakeUnlocked(address indexed account, uint256 withdrawTime);

    event StakeWithdrawn(
        address indexed account,
        address withdrawAddress,
        uint256 amount
    );

    /**
     * @param deposit the entity's deposit
     * @param staked true if this entity is staked.
     * @param stake actual amount of ether staked for this entity.
     * @param unstakeDelaySec minimum delay to withdraw the stake.
     * @param withdrawTime - first block timestamp where 'withdrawStake' will be callable, or zero if already locked
     * @dev sizes were chosen so that (deposit,staked, stake) fit into one cell (used during handleOps)
     *    and the rest fit into a 2nd cell.
     *    112 bit allows for 10^15 eth
     *    48 bit for full timestamp
     *    32 bit allows 150 years for unstake delay
     */
    struct DepositInfo {
        uint112 deposit;
        bool staked;
        uint112 stake;
        uint32 unstakeDelaySec;
        uint48 withdrawTime;
    }

    //API struct used by getStakeInfo and simulateValidation
    struct StakeInfo {
        uint256 stake;
        uint256 unstakeDelaySec;
    }

    /// @return info - full deposit information of given account
    function getDepositInfo(address account)
        external
        view
        returns (DepositInfo memory info);

    /// @return the deposit (for gas payment) of the account
    function balanceOf(address account) external view returns (uint256);

    /**
     * add to the deposit of the given account
     */
    function depositTo(address account) external payable;

    /**
     * add to the account's stake - amount and delay
     * any pending unstake is first cancelled.
     * @param _unstakeDelaySec the new lock duration before the deposit can be withdrawn.
     */
    function addStake(uint32 _unstakeDelaySec) external payable;

    /**
     * attempt to unlock the stake.
     * the value can be withdrawn (using withdrawStake) after the unstake delay.
     */
    function unlockStake() external;

    /**
     * withdraw from the (unlocked) stake.
     * must first call unlockStake and wait for the unstakeDelay to pass
     * @param withdrawAddress the address to send withdrawn value.
     */
    function withdrawStake(address payable withdrawAddress) external;

    /**
     * withdraw from the deposit.
     * @param withdrawAddress the address to send withdrawn value.
     * @param withdrawAmount the amount to withdraw.
     */
    function withdrawTo(address payable withdrawAddress, uint256 withdrawAmount)
        external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/Address.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/SignatureChecker.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";
import "./IERC1271.sol";

/**
 * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like
 * Argent and Gnosis Safe.
 *
 * _Available since v4.1._
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {
        (address recovered, ECDSA.RecoverError error) = ECDSA.tryRecover(hash, signature);
        return
        (error == ECDSA.RecoverError.NoError && recovered == signer) ||
        isValidERC1271SignatureNow(signer, hash, signature);
    }

    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 hash,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature)
        );
        return (success &&
        result.length >= 32 &&
        abi.decode(result, (bytes32)) == bytes32(IERC1271.isValidSignature.selector));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length)
        internal
        pure
        returns (string memory)
    {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.17;

/* solhint-disable no-empty-blocks */

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777Recipient.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol";

/**
 * Token callback handler.
 *   Handles supported tokens' callbacks, allowing account receiving these tokens.
 */
contract TokenCallbackHandler is
    IERC777Recipient,
    IERC721Receiver,
    IERC1155Receiver
{
    function tokensReceived(
        address,
        address,
        address,
        uint256,
        bytes calldata,
        bytes calldata
    ) external pure override {}

    function onERC721Received(
        address,
        address,
        uint256,
        bytes calldata
    ) external pure override returns (bytes4) {
        return IERC721Receiver.onERC721Received.selector;
    }

    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes calldata
    ) external pure override returns (bytes4) {
        return IERC1155Receiver.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] calldata,
        uint256[] calldata,
        bytes calldata
    ) external pure override returns (bytes4) {
        return IERC1155Receiver.onERC1155BatchReceived.selector;
    }

    function supportsInterface(bytes4 interfaceId)
        external
        view
        virtual
        override
        returns (bool)
    {
        return
            interfaceId == type(IERC721Receiver).interfaceId ||
            interfaceId == type(IERC1155Receiver).interfaceId ||
            interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;

/**
 * User Operation struct
 * @param sender the sender account of this request.
 * @param nonce unique value the sender uses to verify it is not a replay.
 * @param initCode if set, the account contract will be created by this constructor/
 * @param callData the method call to execute on this account.
 * @param callGasLimit the gas limit passed to the callData method call.
 * @param verificationGasLimit gas used for validateUserOp and validatePaymasterUserOp.
 * @param preVerificationGas gas not calculated by the handleOps method, but added to the gas paid. Covers batch overhead.
 * @param maxFeePerGas same as EIP-1559 gas parameter.
 * @param maxPriorityFeePerGas same as EIP-1559 gas parameter.
 * @param paymasterAndData if set, this field holds the paymaster address and paymaster-specific data. the paymaster will pay for the transaction instead of the sender.
 * @param signature sender-verified signature over the entire request, the EntryPoint address and the chain ID.
 */
struct UserOperation {
    address sender;
    uint256 nonce;
    bytes initCode;
    bytes callData;
    uint256 callGasLimit;
    uint256 verificationGasLimit;
    uint256 preVerificationGas;
    uint256 maxFeePerGas;
    uint256 maxPriorityFeePerGas;
    bytes paymasterAndData;
    bytes signature;
}

{
  "compilationTarget": {
    "contracts/account-abstraction/Account.sol": "Account"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@ensdomains/=node_modules/@ensdomains/",
    ":@matterlabs/=node_modules/@matterlabs/",
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":@prb/=node_modules/@prb/",
    ":@uniswap/=node_modules/@uniswap/",
    ":base64-sol/=node_modules/base64-sol/",
    ":contracts/=contracts/",
    ":ds-test/=lib/ds-test/src/",
    ":eth-gas-reporter/=node_modules/eth-gas-reporter/",
    ":forge-std/=lib/forge-std/src/",
    ":hardhat-deploy/=node_modules/hardhat-deploy/",
    ":hardhat/=node_modules/hardhat/",
    ":pnm-contracts/=lib/pnm-contracts/"
  ]
}