// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

interface I$LOBE is IERC20, IERC20Metadata {
    function mint(address to, uint256 amount) external;
}

interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

contract NoBrainerStaking is Ownable, IERC721Receiver, ReentrancyGuard {
    using SafeMath for uint256;

    I$LOBE public rewardsTokenContract;  // interface for $LOBE contract
    IERC721 public stakeNFTContract;     // interface for NoBrainer

    uint256 public startTimestamp;   // staking start timestamp
    mapping(address=>uint256) public lastUpdateTimestamp;    // last update timestamp for an address

    uint256 public rate = 100 ether;  // staking reward rate per day   100 * 10 ** 18   

    mapping(address=>uint256) public NFTbalanceForAddress;   // NoBrainer balance for an address
    mapping(address=>uint256) private claimableForAddress;   // accumulated claimable balance before lastUpdateTmestap for an address

    mapping(uint256=>address) public NFTtokenOwnerForId;     //  NoBrainer owner address for tokenId already staked
    mapping(address=>uint256[]) public NFTtokenIdsStakedForAddress;   // get list of staked tokenId list for an address

    uint256 public totalNFTstaked;                           // total NoBrainer staked
    uint256 public totalRewardClaimed;                       // total reward claimed  (mint from $LOBE)
    mapping(address=>uint256) public totalRewardClaimedForAddress;        // total reward claimed for an address (mint from $LOBE)

    // modifier for check if staking is started
    modifier hasStarted() {
        require(startTimestamp != 0, "NftStaking: staking not started");
        _;
    }

    modifier hasNotStarted() {
        require(startTimestamp == 0, "NftStaking: staking has started");
        _;
    }

    event Started();
    event NftStaked(address staker, uint256 tokenId);
    event NftUnstaked(address staker, uint256 tokenId);
    event RewardsClaimed(address staker, uint256 amount);

    constructor (address nftContract, address rewardContract) {
        stakeNFTContract = IERC721(nftContract);
        rewardsTokenContract = I$LOBE(rewardContract);
    }

    // start staking
    function start() public onlyOwner hasNotStarted {
        startTimestamp = block.timestamp;
        emit Started();
    }

    // in case for update Nobrainer or $LOBE address
    function updateContractAddress(address nftContract, address rewardContract) public onlyOwner {
        stakeNFTContract = IERC721(nftContract);
        rewardsTokenContract = I$LOBE(rewardContract);
    }

    // update staking reward rate
    function updateRate (uint256 _rate) public onlyOwner {
        rate = _rate;
    }

    // important!!!    in case NoBrainer recieved to staking contract for stake,  user must send it as safetransferfrom to call this function.
    function onERC721Received(
        address ,
        address from,
        uint256 tokenId,
        bytes calldata 
    ) external override returns (bytes4){
        _stakeNFT(tokenId, from);
        return bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"));
    }

    // get total claimable amount, updates everytime calling this function
    function getClaimableAmount(address account) public view returns (uint256) {
        return claimableForAddress[account] + ((block.timestamp - lastUpdateTimestamp[account]).mul(NFTbalanceForAddress[account]).mul(rate).div(1 days));
    }

    // list NFT ids staked by address

    function listNFTStaked(address addr) public view returns (uint256 [] memory) {
        return NFTtokenIdsStakedForAddress[addr];
    }

    // stake NFT
    function _stakeNFT(uint256 id, address from) internal hasStarted {
        require(address(stakeNFTContract) == msg.sender, "NftStaking: not correct NFT staked!");
        claimableForAddress[from] = getClaimableAmount(from);
        NFTbalanceForAddress[from] = NFTbalanceForAddress[from].add(1);
        totalNFTstaked = totalNFTstaked.add(1);
        lastUpdateTimestamp[from] = block.timestamp;
        NFTtokenOwnerForId[id] = from;
        NFTtokenIdsStakedForAddress[from].push(id);
        emit NftStaked(from, id);
    }

    // list NFT by address

    function listNFT(address addr) public view returns (uint256 [] memory) {
        uint256 tokenCount = stakeNFTContract.balanceOf(addr);
        uint256[] memory tokensId;
        if (tokenCount == 0) {
            return new uint256[](0);
    	}
    	else {
    		tokensId = new uint256[](tokenCount);
            for(uint256 i = 0; i < tokenCount; i++){
                tokensId[i] = stakeNFTContract.tokenOfOwnerByIndex(addr, i);
            }            
    	}
        return tokensId;
    }

    // batch stake NFT
    function batchStakeNFT() external hasStarted {        
        uint256[] memory tokensId = listNFT(msg.sender);        
        for (uint256 i=0; i < tokensId.length; i ++){
            stakeNFTContract.safeTransferFrom(msg.sender, address(this), tokensId[i]);
        }
    }

    // unstake NFT, transfer back nft to original owner
    function unstakeNft(uint256 id) public hasStarted {        
        require(NFTtokenOwnerForId[id] == msg.sender, "NftStaking: token not staked or incorrect token owner!");
        NFTtokenOwnerForId[id] = address(0);
        claimableForAddress[msg.sender] = getClaimableAmount(msg.sender);        
        NFTbalanceForAddress[msg.sender] = NFTbalanceForAddress[msg.sender].sub(1);
        totalNFTstaked = totalNFTstaked.sub(1);
        lastUpdateTimestamp[msg.sender] = block.timestamp;
        for (uint i = 0; i < NFTtokenIdsStakedForAddress[msg.sender].length; i ++){
            if (NFTtokenIdsStakedForAddress[msg.sender][i] == id){
                NFTtokenIdsStakedForAddress[msg.sender][i] = NFTtokenIdsStakedForAddress[msg.sender][NFTtokenIdsStakedForAddress[msg.sender].length - 1];
                break;
            }
        }
        NFTtokenIdsStakedForAddress[msg.sender].pop();
        try stakeNFTContract.safeTransferFrom(address(this), msg.sender, id)  {} catch {            
            stakeNFTContract.transferFrom(address(this), msg.sender, id);
        }
        emit NftUnstaked(msg.sender, id);
    }

    // batch unstake all NFT for msg.sender
    function unstakeAllNFTForAddress() external hasStarted {
        require(NFTtokenIdsStakedForAddress[msg.sender].length > 0, "NftStaing: Caller doesn't have any staked token!");
        uint256 count = NFTtokenIdsStakedForAddress[msg.sender].length;
        for(uint i = 0; i < count; i ++){
            unstakeNft(NFTtokenIdsStakedForAddress[msg.sender][0]);
        }
    }

    // claim reward for stake holers
    function claimReward() external hasStarted {
        uint256 claimAmount = getClaimableAmount(msg.sender);
        require(claimAmount > 0, "NftStaking: no claimable balance!");
        claimableForAddress[msg.sender] = 0;
        lastUpdateTimestamp[msg.sender] = block.timestamp;
        rewardsTokenContract.mint(msg.sender, claimAmount);
        totalRewardClaimed = totalRewardClaimed.add(claimAmount);
        totalRewardClaimedForAddress[msg.sender] = totalRewardClaimedForAddress[msg.sender].add(claimAmount);
        emit RewardsClaimed(msg.sender, claimAmount);
    }
}

{
  "compilationTarget": {
    "NoBrainerStaking.sol": "NoBrainerStaking"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}