// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (libraries/CommonEventsAndErrors.sol)

/// @notice A collection of common events and errors thrown within the Origami contracts
library CommonEventsAndErrors {
    error InsufficientBalance(address token, uint256 required, uint256 balance);
    error InvalidToken(address token);
    error InvalidParam();
    error InvalidAddress(address addr);
    error InvalidAmount(address token, uint256 amount);
    error ExpectedNonZero();
    error Slippage(uint256 minAmountExpected, uint256 actualAmount);
    error IsPaused();
    error UnknownExecuteError(bytes returndata);
    error InvalidAccess();
    error BreachedMaxTotalSupply(uint256 totalSupply, uint256 maxTotalSupply);

    event TokenRecovered(address indexed to, address indexed token, uint256 amount);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62-63: reserved
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';

/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;

  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;

  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;

  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;

  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);

  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);

  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);

  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

pragma solidity ^0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (interfaces/external/aave/aave-v3-periphery/IAaveV3RewardsController.sol)

interface IAaveV3RewardsController {
  /**
   * @dev Claims all rewards for a user to the desired address, on all the assets of the pool, accumulating the pending rewards
   * @param assets The list of assets to check eligible distributions before claiming rewards
   * @param to The address that will be receiving the rewards
   * @return rewardsList List of addresses of the reward tokens
   * @return claimedAmounts List that contains the claimed amount per reward, following same order as "rewardList"
   **/
  function claimAllRewards(
    address[] calldata assets,
    address to
  ) external returns (address[] memory rewardsList, uint256[] memory claimedAmounts);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (interfaces/common/borrowAndLend/IOrigamiAaveV3BorrowAndLend.sol)

import { IPool as IAavePool } from "@aave/core-v3/contracts/interfaces/IPool.sol";
import { IAToken as IAaveAToken } from "@aave/core-v3/contracts/interfaces/IAToken.sol";
import { IERC20Metadata } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";

import { IOrigamiBorrowAndLend } from "contracts/interfaces/common/borrowAndLend/IOrigamiBorrowAndLend.sol";

/**
 * @notice An Origami abstraction over a borrow/lend money market for
 * a single `supplyToken` and a single `borrowToken`.
 * This is an Aave V3 specific interface, borrowing using variable debt only
 */
interface IOrigamiAaveV3BorrowAndLend is IOrigamiBorrowAndLend {
    event ReferralCodeSet(uint16 code);
    event AavePoolSet(address indexed pool);

    /**
     * @notice Set the Aave/Spark referral code
     */
    function setReferralCode(uint16 code) external;

    /**
     * @notice Allow the use of `supplyToken` as collateral within Aave/Spark
     */
    function setUserUseReserveAsCollateral(bool useAsCollateral) external;

    /**
     * @notice Update the e-mode category for the pool
     */
    function setEModeCategory(uint8 categoryId) external;

    /**
     * @notice Update the Aave/Spark pool
     */
    function setAavePool(address pool) external;

    /**
     * @notice The Aave/Spark pool contract
     */
    function aavePool() external view returns (IAavePool);

    /**
     * @notice The Aave/Spark rebasing aToken received when supplying `supplyToken`
     */
    function aaveAToken() external view returns (IAaveAToken);

    /**
     * @notice The Aave/Spark rebasing variable debt token received when borrowing `debtToken`
     */
    function aaveDebtToken() external view returns (IERC20Metadata);

    /**
     * @notice The referral code used when supplying/borrowing in Aave/Spark
     */
    function referralCode() external view returns (uint16);

    /**
     * @notice Returns the Aave/Spark account data
     * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
     * @return totalDebtBase The total debt of the user in the base currency used by the price feed
     * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
     * @return currentLiquidationThreshold The liquidation threshold of the user
     * @return ltv The loan to value of The user
     * @return healthFactor The current health factor of the user
    */
    function debtAccountData() external view returns (
        uint256 totalCollateralBase,
        uint256 totalDebtBase,
        uint256 availableBorrowsBase,
        uint256 currentLiquidationThreshold,
        uint256 ltv,
        uint256 healthFactor
    );
    
    /**
     * @notice Elevated access can claim rewards, from a nominated rewards controller.
     * @param rewardsController The aave-v3-periphery RewardsController
     * @param assets The list of assets to check eligible distributions before claiming rewards
     * @param to The address that will be receiving the rewards
     * @return rewardsList List of addresses of the reward tokens
     * @return claimedAmounts List that contains the claimed amount per reward, following same order as "rewardList"
     */
    function claimAllRewards(
        address rewardsController,
        address[] calldata assets,
        address to
    ) external returns (
        address[] memory rewardsList, 
        uint256[] memory claimedAmounts
    );
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (interfaces/common/borrowAndLend/IOrigamiBorrowAndLend.sol)

/**
 * @notice An Origami abstraction over a borrow/lend money market for
 * a single `supplyToken` and a single `borrowToken`, for a given `positionOwner`
 */
interface IOrigamiBorrowAndLend {
    event PositionOwnerSet(address indexed account);
    event SurplusDebtReclaimed(uint256 amount, address indexed recipient);

    /**
     * @notice Set the position owner who can borrow/lend via this contract
     */
    function setPositionOwner(address account) external;

    /**
     * @notice Supply tokens as collateral
     */
    function supply(
        uint256 supplyAmount
    ) external;

    /**
     * @notice Withdraw collateral tokens to recipient
     * @dev Set `withdrawAmount` to type(uint256).max in order to withdraw the whole balance
     */
    function withdraw(
        uint256 withdrawAmount, 
        address recipient
    ) external returns (uint256 amountWithdrawn);

    /**
     * @notice Borrow tokens and send to recipient
     */
    function borrow(
        uint256 borrowAmount,
        address recipient
    ) external;

    /**
     * @notice Repay debt. 
     * @dev If `repayAmount` is set higher than the actual outstanding debt balance, it will be capped
     * to that outstanding debt balance
     * `debtRepaidAmount` return parameter will be capped to the outstanding debt balance.
     * Any surplus debtTokens (if debt fully repaid) will remain in this contract
     */
    function repay(
        uint256 repayAmount
    ) external returns (uint256 debtRepaidAmount);

    /**
     * @notice Repay debt and withdraw collateral in one step
     * @dev If `repayAmount` is set higher than the actual outstanding debt balance, it will be capped
     * to that outstanding debt balance
     * Set `withdrawAmount` to type(uint256).max in order to withdraw the whole balance
     * `debtRepaidAmount` return parameter will be capped to the outstanding debt amount.
     * Any surplus debtTokens (if debt fully repaid) will remain in this contract
     */
    function repayAndWithdraw(
        uint256 repayAmount, 
        uint256 withdrawAmount, 
        address recipient
    ) external returns (
        uint256 debtRepaidAmount,
        uint256 withdrawnAmount
    );

    /**
     * @notice Supply collateral and borrow in one step
     */
    function supplyAndBorrow(
        uint256 supplyAmount, 
        uint256 borrowAmount, 
        address recipient
    ) external;

    /**
     * @notice The approved owner of the borrow/lend position
     */
    function positionOwner() external view returns (address);

    /**
     * @notice The token supplied as collateral
     */
    function supplyToken() external view returns (address);

    /**
     * @notice The token which is borrowed
     */
    function borrowToken() external view returns (address);

    /**
     * @notice The current (manually tracked) balance of tokens supplied
     */
    function suppliedBalance() external view returns (uint256);

    /**
     * @notice The current debt balance of tokens borrowed
     */
    function debtBalance() external view returns (uint256);

    /**
     * @notice Whether a given Assets/Liabilities Ratio is safe, given the upstream
     * money market parameters
     */
    function isSafeAlRatio(uint256 alRatio) external view returns (bool);

    /**
     * @notice How many `supplyToken` are available to withdraw from collateral
     * from the entire protocol, assuming this contract has fully paid down its debt
     */
    function availableToWithdraw() external view returns (uint256);

    /**
     * @notice How much more capacity is available to supply
     */
    function availableToSupply() external view returns (
        uint256 supplyCap,
        uint256 available
    );

    /**
     * @notice How many `borrowToken` are available to borrow
     * from the entire protocol
     */
    function availableToBorrow() external view returns (uint256);
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (interfaces/common/access/IOrigamiElevatedAccess.sol)

/**
 * @notice Inherit to add Owner roles for DAO elevated access.
 */ 
interface IOrigamiElevatedAccess {
    event ExplicitAccessSet(address indexed account, bytes4 indexed fnSelector, bool indexed value);

    event NewOwnerProposed(address indexed oldOwner, address indexed oldProposedOwner, address indexed newProposedOwner);
    event NewOwnerAccepted(address indexed oldOwner, address indexed newOwner);

    struct ExplicitAccess {
        bytes4 fnSelector;
        bool allowed;
    }

    /**
     * @notice The address of the current owner.
     */ 
    function owner() external view returns (address);

    /**
     * @notice Explicit approval for an address to execute a function.
     * allowedCaller => function selector => true/false
     */
    function explicitFunctionAccess(address contractAddr, bytes4 functionSelector) external view returns (bool);

    /**
     * @notice Proposes a new Owner.
     * Can only be called by the current owner
     */
    function proposeNewOwner(address account) external;

    /**
     * @notice Caller accepts the role as new Owner.
     * Can only be called by the proposed owner
     */
    function acceptOwner() external;

    /**
     * @notice Grant `allowedCaller` the rights to call the function selectors in the access list.
     * @dev fnSelector == bytes4(keccak256("fn(argType1,argType2,...)"))
     */
    function setExplicitAccess(address allowedCaller, ExplicitAccess[] calldata access) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);

  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (common/borrowAndLend/OrigamiAaveV3BorrowAndLend.sol)

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC20Metadata } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import { WadRayMath as AaveWadRayMath} from "@aave/core-v3/contracts/protocol/libraries/math/WadRayMath.sol";
import { ReserveConfiguration as AaveReserveConfiguration } from "@aave/core-v3/contracts/protocol/libraries/configuration/ReserveConfiguration.sol";
import { DataTypes as AaveDataTypes } from "@aave/core-v3/contracts/protocol/libraries/types/DataTypes.sol";
import { IPool as IAavePool } from "@aave/core-v3/contracts/interfaces/IPool.sol";
import { IAToken as IAaveAToken } from "@aave/core-v3/contracts/interfaces/IAToken.sol";
import { IAaveV3RewardsController } from "contracts/interfaces/external/aave/aave-v3-periphery/IAaveV3RewardsController.sol";

import { IOrigamiAaveV3BorrowAndLend } from "contracts/interfaces/common/borrowAndLend/IOrigamiAaveV3BorrowAndLend.sol";
import { CommonEventsAndErrors } from "contracts/libraries/CommonEventsAndErrors.sol";
import { OrigamiElevatedAccess } from "contracts/common/access/OrigamiElevatedAccess.sol";

/**
 * @notice An Origami abstraction over a borrow/lend money market for
 * a single `supplyToken` and a single `borrowToken`.
 * This is an Aave V3 specific interface, borrowing using variable debt only
 */
contract OrigamiAaveV3BorrowAndLend is IOrigamiAaveV3BorrowAndLend, OrigamiElevatedAccess {
    using SafeERC20 for IERC20;
    using AaveReserveConfiguration for AaveDataTypes.ReserveConfigurationMap;

    /**
     * @notice The Aave/Spark pool contract
     */
    IAavePool public override aavePool;

    /**
     * @notice The token supplied as collateral
     */
    address public override immutable supplyToken;

    /**
     * @notice The token which is borrowed
     */
    address public override immutable borrowToken;

    /**
     * @notice The Aave/Spark rebasing aToken received when supplying `supplyToken`
     */
    IAaveAToken public override immutable aaveAToken;

    /**
     * @notice The Aave/Spark rebasing variable debt token received when borrowing `debtToken`
     */
    IERC20Metadata public override immutable aaveDebtToken;

    /**
     * @notice The approved owner of the borrow/lend position
     */
    address public override positionOwner;
    
    /**
     * @notice Only use the Aave/Spark variable interest, not fixed
     */
    uint256 private constant INTEREST_RATE_MODE = uint256(AaveDataTypes.InterestRateMode.VARIABLE);

    /**
     * @notice The referral code used when supplying/borrowing in Aave/Spark
     */
    uint16 public override referralCode = 0;

    /**
     * @dev The number of Aave/Spark aToken shares are tracked manually rather than relying on
     * balanceOf
     */
    uint256 private _aTokenShares;

    /**
     * @dev Factor when converting the Aave LTV (basis points) to an Origami Assets/Liabilities (1e18)
     */
    uint256 private constant LTV_TO_AL_FACTOR = 1e22;

    constructor(
        address _initialOwner,
        address _supplyToken,
        address _borrowToken,
        address _aavePool,
        uint8 _defaultEMode
    ) OrigamiElevatedAccess(_initialOwner) {
        supplyToken = _supplyToken;
        borrowToken = _borrowToken;
        
        aavePool = IAavePool(_aavePool);
        aaveAToken = IAaveAToken(aavePool.getReserveData(supplyToken).aTokenAddress);
        aaveDebtToken = IERC20Metadata(aavePool.getReserveData(_borrowToken).variableDebtTokenAddress);

        // Approve the supply and borrow to the Aave/Spark pool upfront
        IERC20(supplyToken).forceApprove(address(aavePool), type(uint256).max);
        IERC20(borrowToken).forceApprove(address(aavePool), type(uint256).max);

        // Initate e-mode on the Aave/Spark pool if required
        if (_defaultEMode != 0) {
            aavePool.setUserEMode(_defaultEMode);
        }
    }

    /**
     * @notice Set the position owner who can borrow/lend via this contract
     */
    function setPositionOwner(address account) external override onlyElevatedAccess {
        positionOwner = account;
        emit PositionOwnerSet(account);
    }

    /**
     * @notice Set the Aave/Spark referral code
     */
    function setReferralCode(uint16 code) external override onlyElevatedAccess {
        referralCode = code;
        emit ReferralCodeSet(code);
    }

    /**
     * @notice Allow the use of `supplyToken` as collateral within Aave/Spark
     */
    function setUserUseReserveAsCollateral(bool useAsCollateral) external override onlyElevatedAccess {
        aavePool.setUserUseReserveAsCollateral(supplyToken, useAsCollateral);
    }

    /**
     * @notice Update the e-mode category for the pool
     */
    function setEModeCategory(uint8 categoryId) external override onlyElevatedAccess {
        aavePool.setUserEMode(categoryId);
    }

    /**
     * @notice Update the Aave/Spark pool
     */
    function setAavePool(address pool) external override onlyElevatedAccess {
        if (pool == address(0)) revert CommonEventsAndErrors.InvalidAddress(pool);

        address oldPool = address(aavePool);
        if (pool == oldPool) revert CommonEventsAndErrors.InvalidAddress(pool);

        emit AavePoolSet(pool);
        aavePool = IAavePool(pool);

        // Reset allowance to old Aave/Spark pool
        IERC20(supplyToken).forceApprove(oldPool, 0);
        IERC20(borrowToken).forceApprove(oldPool, 0);

        // Approve the supply and borrow to the new Aave/Spark pool upfront
        IERC20(supplyToken).forceApprove(pool, type(uint256).max);
        IERC20(borrowToken).forceApprove(pool, type(uint256).max);
    }

    /**
     * @notice Elevated access can claim rewards, from a nominated rewards controller.
     * @param rewardsController The aave-v3-periphery RewardsController
     * @param assets The list of assets to check eligible distributions before claiming rewards
     * @param to The address that will be receiving the rewards
     * @return rewardsList List of addresses of the reward tokens
     * @return claimedAmounts List that contains the claimed amount per reward, following same order as "rewardList"
     */
    function claimAllRewards(
        address rewardsController,
        address[] calldata assets,
        address to
    ) external override onlyElevatedAccess returns (
        address[] memory rewardsList, 
        uint256[] memory claimedAmounts
    ) {
        // Event emitted within rewards controller.
        return IAaveV3RewardsController(rewardsController).claimAllRewards(
            assets,
            to
        );
    }

    /**
     * @notice Supply tokens as collateral
     */
    function supply(
        uint256 supplyAmount
    ) external override onlyPositionOwnerOrElevated {
        _supply(supplyAmount);
    }

    /**
     * @notice Withdraw collateral tokens to recipient
     * @dev Set `withdrawAmount` to type(uint256).max in order to withdraw the whole balance
     */
    function withdraw(
        uint256 withdrawAmount, 
        address recipient
    ) external override onlyPositionOwnerOrElevated returns (uint256 amountWithdrawn) {
        amountWithdrawn = _withdraw(withdrawAmount, recipient);
    }

    /**
     * @notice Borrow tokens and send to recipient
     */
    function borrow(
        uint256 borrowAmount, 
        address recipient
    ) external override onlyPositionOwnerOrElevated {
        _borrow(borrowAmount, recipient);
    }

    /**
     * @notice Repay debt. 
     * @dev If `repayAmount` is set higher than the actual outstanding debt balance, it will be capped
     * to that outstanding debt balance
     * `debtRepaidAmount` return parameter will be capped to the outstanding debt balance.
     * Any surplus debtTokens (if debt fully repaid) will remain in this contract
     */
    function repay(
        uint256 repayAmount
    ) external override onlyPositionOwnerOrElevated returns (uint256 debtRepaidAmount) {
        debtRepaidAmount = _repay(repayAmount);
    }

    /**
     * @notice Repay debt and withdraw collateral in one step
     * @dev If `repayAmount` is set higher than the actual outstanding debt balance, it will be capped
     * to that outstanding debt balance
     * Set `withdrawAmount` to type(uint256).max in order to withdraw the whole balance
     * `debtRepaidAmount` return parameter will be capped to the outstanding debt amount.
     * Any surplus debtTokens (if debt fully repaid) will remain in this contract
     */
    function repayAndWithdraw(
        uint256 repayAmount, 
        uint256 withdrawAmount, 
        address recipient
    ) external override onlyPositionOwnerOrElevated returns (uint256 debtRepaidAmount, uint256 withdrawnAmount) {
        debtRepaidAmount = _repay(repayAmount);
        withdrawnAmount = _withdraw(withdrawAmount, recipient);
    }

    /**
     * @notice Supply collateral and borrow in one step
     */
    function supplyAndBorrow(
        uint256 supplyAmount, 
        uint256 borrowAmount, 
        address recipient
    ) external override onlyPositionOwnerOrElevated {
        _supply(supplyAmount);
        _borrow(borrowAmount, recipient);
    }

    /**
     * @notice Recover accidental donations, or surplus aaveAToken borrowToken.
     * `aaveAToken` can only be recovered for amounts greater than the internally tracked balance of shares.
     * `borrowToken` are only expected on shutdown if there are surplus tokens after full repayment.
     * @param token Token to recover
     * @param to Recipient address
     * @param amount Amount to recover
     */
    function recoverToken(address token, address to, uint256 amount) external onlyElevatedAccess {
        emit CommonEventsAndErrors.TokenRecovered(to, token, amount);
        IERC20(token).safeTransfer(to, amount);

        if (token == address(aaveAToken)) {
            // Ensure there are still enough aToken shares to cover the internally tracked
            // balance
            uint256 _sharesAfter = aaveAToken.scaledBalanceOf(address(this));
            if (_aTokenShares > _sharesAfter) {
                revert CommonEventsAndErrors.InvalidAmount(token, amount);
            }
        }
    }
    
    /**
     * @notice The current (manually tracked) balance of tokens supplied
     */
    function suppliedBalance() public override view returns (uint256) {
        return AaveWadRayMath.rayMul(
            _aTokenShares, 
            aavePool.getReserveNormalizedIncome(supplyToken)
        );
    }

    /**
     * @notice The current debt balance of tokens borrowed
     */
    function debtBalance() public override view returns (uint256) {
        return aaveDebtToken.balanceOf(address(this));
    }

    /**
     * @notice Whether a given Assets/Liabilities Ratio is safe, given the upstream
     * money market parameters
     */
    function isSafeAlRatio(uint256 alRatio) external override view returns (bool) {
        // If in e-mode, then use the LTV from that category
        // Otherwise use the LTV from the reserve data
        uint256 _eModeId = aavePool.getUserEMode(address(this));

        // Our max LTV must be <= Aave's deposits LTV (not the liquidation LTV)
        uint256 _aaveLtv = _eModeId == 0
            ? aavePool.getConfiguration(supplyToken).getLtv()
            : aavePool.getEModeCategoryData(uint8(_eModeId)).ltv;

        // Convert the Aave LTV to A/L (with 1e18 precision) and compare
        // The A/L is considered safe if it's higher or equal to the upstream aave A/L
        unchecked {
            return alRatio >= LTV_TO_AL_FACTOR / _aaveLtv;
        }
    }

    /**
     * @notice How many `supplyToken` are available to withdraw from collateral
     * from the entire protocol, assuming this contract has fully paid down its debt
     */
    function availableToWithdraw() external override view returns (uint256) {
        return IERC20(supplyToken).balanceOf(address(aaveAToken));
    }

    /**
     * @notice How many `borrowToken` are available to borrow
     * from the entire protocol
     */
    function availableToBorrow() external override view returns (uint256 available) {
        AaveDataTypes.ReserveData memory _reserveData = aavePool.getReserveData(borrowToken);
        uint256 borrowCap = _reserveData.configuration.getBorrowCap() * (10 ** _reserveData.configuration.getDecimals());
        available = IERC20(borrowToken).balanceOf(_reserveData.aTokenAddress);

        if (borrowCap > 0 && borrowCap < available) {
            available = borrowCap;
        }
    }

    /**
     * @notice How much more capacity is available to supply
     */
    function availableToSupply() external override view returns (
        uint256 supplyCap,
        uint256 available
    ) {
        AaveDataTypes.ReserveData memory _reserveData = aavePool.getReserveData(supplyToken);

        // The supply cap needs to be scaled by decimals
        uint256 unscaledCap = _reserveData.configuration.getSupplyCap();
        if (unscaledCap == 0) return (type(uint256).max, type(uint256).max);  
        supplyCap = unscaledCap * (10 ** _reserveData.configuration.getDecimals());

        // The utilised amount is the scaledTotalSupply + any fees accrued to treasury
        // Then scaled by the normalised income.
        uint256 _utilised = AaveWadRayMath.rayMul(
            aavePool.getReserveNormalizedIncome(supplyToken),
            (
                aaveAToken.scaledTotalSupply() +
                _reserveData.accruedToTreasury
            )
        );

        unchecked {
            available = supplyCap > _utilised ? supplyCap - _utilised : 0;
        }
    }

    /**
     * @notice Returns the Aave/Spark account data
     * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
     * @return totalDebtBase The total debt of the user in the base currency used by the price feed
     * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
     * @return currentLiquidationThreshold The liquidation threshold of the user
     * @return ltv The loan to value of The user
     * @return healthFactor The current health factor of the user
    */
    function debtAccountData() external override view returns (
        uint256 totalCollateralBase,
        uint256 totalDebtBase,
        uint256 availableBorrowsBase,
        uint256 currentLiquidationThreshold,
        uint256 ltv,
        uint256 healthFactor
    ) {
        return aavePool.getUserAccountData(address(this));
    }

    function _supply(uint256 supplyAmount) internal {
        uint256 sharesBefore = aaveAToken.scaledBalanceOf(address(this));
        aavePool.supply(supplyToken, supplyAmount, address(this), referralCode);
        _aTokenShares = _aTokenShares + aaveAToken.scaledBalanceOf(address(this)) - sharesBefore;
    }

    function _withdraw(uint256 withdrawAmount, address recipient) internal returns (uint256 amountWithdrawn) {
        uint256 sharesBefore = aaveAToken.scaledBalanceOf(address(this));
        amountWithdrawn = aavePool.withdraw(supplyToken, withdrawAmount, recipient);
        _aTokenShares = _aTokenShares + aaveAToken.scaledBalanceOf(address(this)) - sharesBefore;
    }

    function _borrow(uint256 borrowAmount, address recipient) internal {
        aavePool.borrow(borrowToken, borrowAmount, INTEREST_RATE_MODE, referralCode, address(this));
        IERC20(borrowToken).safeTransfer(recipient, borrowAmount);
    }
    
    function _repay(uint256 repayAmount) internal returns (uint256 debtRepaidAmount) {
        if (debtBalance() != 0) {
            debtRepaidAmount = aavePool.repay(borrowToken, repayAmount, INTEREST_RATE_MODE, address(this));
        }
    }

    /**
     * @dev Only the positionOwner or Elevated Access is allowed to call.
     */
    modifier onlyPositionOwnerOrElevated() {
        if (msg.sender != address(positionOwner)) {
            if (!isElevatedAccess(msg.sender, msg.sig)) revert CommonEventsAndErrors.InvalidAccess();
        }
        _;
    }
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (common/access/OrigamiElevatedAccessBase.sol)

import { OrigamiElevatedAccessBase } from "contracts/common/access/OrigamiElevatedAccessBase.sol";

/**
 * @notice Inherit to add Owner roles for DAO elevated access.
 */ 
abstract contract OrigamiElevatedAccess is OrigamiElevatedAccessBase {
    constructor(address initialOwner) {
        _init(initialOwner);
    }
}

pragma solidity 0.8.19;
// SPDX-License-Identifier: AGPL-3.0-or-later
// Origami (common/access/OrigamiElevatedAccessBase.sol)

import { IOrigamiElevatedAccess } from "contracts/interfaces/common/access/IOrigamiElevatedAccess.sol";
import { CommonEventsAndErrors } from "contracts/libraries/CommonEventsAndErrors.sol";

/**
 * @notice Inherit to add Owner roles for DAO elevated access.
 */ 
abstract contract OrigamiElevatedAccessBase is IOrigamiElevatedAccess {
    /**
     * @notice The address of the current owner.
     */ 
    address public override owner;

    /**
     * @notice Explicit approval for an address to execute a function.
     * allowedCaller => function selector => true/false
     */
    mapping(address => mapping(bytes4 => bool)) public override explicitFunctionAccess;

    /// @dev Track proposed owner
    address private _proposedNewOwner;

    function _init(address initialOwner) internal {
        if (owner != address(0)) revert CommonEventsAndErrors.InvalidAccess();
        if (initialOwner == address(0)) revert CommonEventsAndErrors.InvalidAddress(address(0));
        owner = initialOwner;
    }

    /**
     * @notice Proposes a new Owner.
     * Can only be called by the current owner
     */
    function proposeNewOwner(address account) external override onlyElevatedAccess {
        if (account == address(0)) revert CommonEventsAndErrors.InvalidAddress(account);
        emit NewOwnerProposed(owner, _proposedNewOwner, account);
        _proposedNewOwner = account;
    }

    /**
     * @notice Caller accepts the role as new Owner.
     * Can only be called by the proposed owner
     */
    function acceptOwner() external override {
        if (msg.sender != _proposedNewOwner) revert CommonEventsAndErrors.InvalidAccess();

        emit NewOwnerAccepted(owner, msg.sender);
        owner = msg.sender;
        delete _proposedNewOwner;
    }

    /**
     * @notice Grant `allowedCaller` the rights to call the function selectors in the access list.
     * @dev fnSelector == bytes4(keccak256("fn(argType1,argType2,...)"))
     */
    function setExplicitAccess(address allowedCaller, ExplicitAccess[] calldata access) external override onlyElevatedAccess {
        if (allowedCaller == address(0)) revert CommonEventsAndErrors.InvalidAddress(allowedCaller);
        ExplicitAccess memory _access;
        for (uint256 i; i < access.length; ++i) {
            _access = access[i];
            emit ExplicitAccessSet(allowedCaller, _access.fnSelector, _access.allowed);
            explicitFunctionAccess[allowedCaller][_access.fnSelector] = _access.allowed;
        }
    }

    function isElevatedAccess(address caller, bytes4 fnSelector) internal view returns (bool) {
        return (
            caller == owner || 
            explicitFunctionAccess[caller][fnSelector]
        );
    }

    /**
     * @notice The owner is allowed to call, or if explicit access has been given to the caller.
     * @dev Important: Only for use when called from an *external* contract. 
     * If a function with this modifier is called internally then the `msg.sig` 
     * will still refer to the top level externally called function.
     */
    modifier onlyElevatedAccess() {
        if (!isElevatedAccess(msg.sender, msg.sig)) revert CommonEventsAndErrors.InvalidAccess();
        _;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';

/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant STABLE_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant PAUSED_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant EMODE_CATEGORY_MASK =            0xFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore

  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  uint256 internal constant EMODE_CATEGORY_START_BIT_POSITION = 168;
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;

  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_EMODE_CATEGORY = 255;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;

  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;

  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);

    self.data = (self.data & LTV_MASK) | ltv;
  }

  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & ~LTV_MASK;
  }

  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);

    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);

    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);

    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }

  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }

  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }

  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }

  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~PAUSED_MASK) != 0;
  }

  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
  }

  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~SILOED_BORROWING_MASK) != 0;
  }

  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWING_MASK) != 0;
  }

  /**
   * @notice Enables or disables stable rate borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the stable rate borrowing needs to be enabled, false otherwise
   */
  function setStableRateBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & STABLE_BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the stable rate borrowing state of the reserve
   * @param self The reserve configuration
   * @return The stable rate borrowing state
   */
  function getStableRateBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~STABLE_BORROWING_MASK) != 0;
  }

  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);

    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }

  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }

  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);

    self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);

    self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);

    self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );

    self.data =
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }

  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }

  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);

    self.data =
      (self.data & UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }

  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the eMode asset category
   * @param self The reserve configuration
   * @param category The asset category when the user selects the eMode
   */
  function setEModeCategory(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 category
  ) internal pure {
    require(category <= MAX_VALID_EMODE_CATEGORY, Errors.INVALID_EMODE_CATEGORY);

    self.data = (self.data & EMODE_CATEGORY_MASK) | (category << EMODE_CATEGORY_START_BIT_POSITION);
  }

  /**
   * @dev Gets the eMode asset category
   * @param self The reserve configuration
   * @return The eMode category for the asset
   */
  function getEModeCategory(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION;
  }

  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
  }

  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing stableRateBorrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool, bool) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~STABLE_BORROWING_MASK) != 0,
      (dataLocal & ~PAUSED_MASK) != 0
    );
  }

  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   * @return The state param representing eMode category
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION,
      (dataLocal & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION
    );
  }

  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;

  uint256 internal constant WAD_RAY_RATIO = 1e9;

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }

  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }

  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }

  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }

  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)

      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}

{
  "compilationTarget": {
    "contracts/common/borrowAndLend/OrigamiAaveV3BorrowAndLend.sol": "OrigamiAaveV3BorrowAndLend"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": []
}