// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

contract Governable {
    address public gov;

    constructor() public {
        gov = msg.sender;
    }

    modifier onlyGov() {
        require(msg.sender == gov, "Governable: forbidden");
        _;
    }

    function setGov(address _gov) external onlyGov {
        gov = _gov;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IRewardDistributor {
    function rewardToken() external view returns (address);
    function tokensPerInterval() external view returns (uint256);
    function pendingRewards() external view returns (uint256);
    function distribute() external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IRewardTracker {
    function depositBalances(address _account, address _depositToken) external returns (uint256);
    function stakedAmounts(address _account) external returns (uint256);
    function updateRewards() external;
    function stake(address _depositToken, uint256 _amount) external;
    function stakeForAccount(address _fundingAccount, address _account, address _depositToken, uint256 _amount) external;
    function unstake(address _depositToken, uint256 _amount) external;
    function unstakeForAccount(address _account, address _depositToken, uint256 _amount, address _receiver) external;
    function tokensPerInterval() external view returns (uint256);
    function claim(address _receiver) external returns (uint256);
    function claimForAccount(address _account, address _receiver) external returns (uint256);
    function claimable(address _account) external view returns (uint256);
    function averageStakedAmounts(address _account) external view returns (uint256);
    function cumulativeRewards(address _account) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "../libraries/math/SafeMath.sol";
import "../libraries/token/IERC20.sol";
import "../libraries/token/SafeERC20.sol";
import "../libraries/utils/ReentrancyGuard.sol";

import "./interfaces/IRewardDistributor.sol";
import "./interfaces/IRewardTracker.sol";
import "../access/Governable.sol";

contract RewardTracker is IERC20, ReentrancyGuard, IRewardTracker, Governable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    uint256 public constant BASIS_POINTS_DIVISOR = 10000;
    uint256 public constant PRECISION = 1e30;

    uint8 public constant decimals = 18;

    bool public isInitialized;

    string public name;
    string public symbol;

    address public distributor;
    mapping (address => bool) public isDepositToken;
    mapping (address => mapping (address => uint256)) public override depositBalances;

    uint256 public override totalSupply;
    mapping (address => uint256) public balances;
    mapping (address => mapping (address => uint256)) public allowances;

    uint256 public cumulativeRewardPerToken;
    mapping (address => uint256) public override stakedAmounts;
    mapping (address => uint256) public claimableReward;
    mapping (address => uint256) public previousCumulatedRewardPerToken;
    mapping (address => uint256) public override cumulativeRewards;
    mapping (address => uint256) public override averageStakedAmounts;

    bool public inPrivateTransferMode;
    bool public inPrivateStakingMode;
    bool public inPrivateClaimingMode;
    mapping (address => bool) public isHandler;

    event Claim(address receiver, uint256 amount);

    constructor(string memory _name, string memory _symbol) public {
        name = _name;
        symbol = _symbol;
    }

    function initialize(
        address[] memory _depositTokens,
        address _distributor
    ) external onlyGov {
        require(!isInitialized, "RewardTracker: already initialized");
        isInitialized = true;

        for (uint256 i = 0; i < _depositTokens.length; i++) {
            address depositToken = _depositTokens[i];
            isDepositToken[depositToken] = true;
        }

        distributor = _distributor;
    }

    function setDepositToken(address _depositToken, bool _isDepositToken) external onlyGov {
        isDepositToken[_depositToken] = _isDepositToken;
    }

    function setInPrivateTransferMode(bool _inPrivateTransferMode) external onlyGov {
        inPrivateTransferMode = _inPrivateTransferMode;
    }

    function setInPrivateStakingMode(bool _inPrivateStakingMode) external onlyGov {
        inPrivateStakingMode = _inPrivateStakingMode;
    }

    function setInPrivateClaimingMode(bool _inPrivateClaimingMode) external onlyGov {
        inPrivateClaimingMode = _inPrivateClaimingMode;
    }

    function setHandler(address _handler, bool _isActive) external onlyGov {
        isHandler[_handler] = _isActive;
    }

    // to help users who accidentally send their tokens to this contract
    function withdrawToken(address _token, address _account, uint256 _amount) external onlyGov {
        require(!isDepositToken[_token], "RewardTracker: _token cannot be a depositToken");
        IERC20(_token).safeTransfer(_account, _amount);
    }

    function balanceOf(address _account) external view override returns (uint256) {
        return balances[_account];
    }

    function stake(address _depositToken, uint256 _amount) external override nonReentrant {
        if (inPrivateStakingMode) { revert("RewardTracker: action not enabled"); }
        _stake(msg.sender, msg.sender, _depositToken, _amount);
    }

    function stakeForAccount(address _fundingAccount, address _account, address _depositToken, uint256 _amount) external override nonReentrant {
        _validateHandler();
        _stake(_fundingAccount, _account, _depositToken, _amount);
    }

    function unstake(address _depositToken, uint256 _amount) external override nonReentrant {
        if (inPrivateStakingMode) { revert("RewardTracker: action not enabled"); }
        _unstake(msg.sender, _depositToken, _amount, msg.sender);
    }

    function unstakeForAccount(address _account, address _depositToken, uint256 _amount, address _receiver) external override nonReentrant {
        _validateHandler();
        _unstake(_account, _depositToken, _amount, _receiver);
    }

    function transfer(address _recipient, uint256 _amount) external override returns (bool) {
        _transfer(msg.sender, _recipient, _amount);
        return true;
    }

    function allowance(address _owner, address _spender) external view override returns (uint256) {
        return allowances[_owner][_spender];
    }

    function approve(address _spender, uint256 _amount) external override returns (bool) {
        _approve(msg.sender, _spender, _amount);
        return true;
    }

    function transferFrom(address _sender, address _recipient, uint256 _amount) external override returns (bool) {
        if (isHandler[msg.sender]) {
            _transfer(_sender, _recipient, _amount);
            return true;
        }

        uint256 nextAllowance = allowances[_sender][msg.sender].sub(_amount, "RewardTracker: transfer amount exceeds allowance");
        _approve(_sender, msg.sender, nextAllowance);
        _transfer(_sender, _recipient, _amount);
        return true;
    }

    function tokensPerInterval() external override view returns (uint256) {
        return IRewardDistributor(distributor).tokensPerInterval();
    }

    function updateRewards() external override nonReentrant {
        _updateRewards(address(0));
    }

    function claim(address _receiver) external override nonReentrant returns (uint256) {
        if (inPrivateClaimingMode) { revert("RewardTracker: action not enabled"); }
        return _claim(msg.sender, _receiver);
    }

    function claimForAccount(address _account, address _receiver) external override nonReentrant returns (uint256) {
        _validateHandler();
        return _claim(_account, _receiver);
    }

    function claimable(address _account) public override view returns (uint256) {
        uint256 stakedAmount = stakedAmounts[_account];
        if (stakedAmount == 0) {
            return claimableReward[_account];
        }
        uint256 supply = totalSupply;
        uint256 pendingRewards = IRewardDistributor(distributor).pendingRewards().mul(PRECISION);
        uint256 nextCumulativeRewardPerToken = cumulativeRewardPerToken.add(pendingRewards.div(supply));
        return claimableReward[_account].add(
            stakedAmount.mul(nextCumulativeRewardPerToken.sub(previousCumulatedRewardPerToken[_account])).div(PRECISION));
    }

    function rewardToken() public view returns (address) {
        return IRewardDistributor(distributor).rewardToken();
    }

    function _claim(address _account, address _receiver) private returns (uint256) {
        _updateRewards(_account);

        uint256 tokenAmount = claimableReward[_account];
        claimableReward[_account] = 0;

        if (tokenAmount > 0) {
            IERC20(rewardToken()).safeTransfer(_receiver, tokenAmount);
            emit Claim(_account, tokenAmount);
        }

        return tokenAmount;
    }

    function _mint(address _account, uint256 _amount) internal {
        require(_account != address(0), "RewardTracker: mint to the zero address");

        totalSupply = totalSupply.add(_amount);
        balances[_account] = balances[_account].add(_amount);

        emit Transfer(address(0), _account, _amount);
    }

    function _burn(address _account, uint256 _amount) internal {
        require(_account != address(0), "RewardTracker: burn from the zero address");

        balances[_account] = balances[_account].sub(_amount, "RewardTracker: burn amount exceeds balance");
        totalSupply = totalSupply.sub(_amount);

        emit Transfer(_account, address(0), _amount);
    }

    function _transfer(address _sender, address _recipient, uint256 _amount) private {
        require(_sender != address(0), "RewardTracker: transfer from the zero address");
        require(_recipient != address(0), "RewardTracker: transfer to the zero address");

        if (inPrivateTransferMode) { _validateHandler(); }

        balances[_sender] = balances[_sender].sub(_amount, "RewardTracker: transfer amount exceeds balance");
        balances[_recipient] = balances[_recipient].add(_amount);

        emit Transfer(_sender, _recipient,_amount);
    }

    function _approve(address _owner, address _spender, uint256 _amount) private {
        require(_owner != address(0), "RewardTracker: approve from the zero address");
        require(_spender != address(0), "RewardTracker: approve to the zero address");

        allowances[_owner][_spender] = _amount;

        emit Approval(_owner, _spender, _amount);
    }

    function _validateHandler() private view {
        require(isHandler[msg.sender], "RewardTracker: forbidden");
    }

    function _stake(address _fundingAccount, address _account, address _depositToken, uint256 _amount) private {
        require(_amount > 0, "RewardTracker: invalid _amount");
        require(isDepositToken[_depositToken], "RewardTracker: invalid _depositToken");

        IERC20(_depositToken).safeTransferFrom(_fundingAccount, address(this), _amount);

        _updateRewards(_account);

        stakedAmounts[_account] = stakedAmounts[_account].add(_amount);
        depositBalances[_account][_depositToken] = depositBalances[_account][_depositToken].add(_amount);

        _mint(_account, _amount);
    }

    function _unstake(address _account, address _depositToken, uint256 _amount, address _receiver) private {
        require(_amount > 0, "RewardTracker: invalid _amount");
        require(isDepositToken[_depositToken], "RewardTracker: invalid _depositToken");

        _updateRewards(_account);

        uint256 stakedAmount = stakedAmounts[_account];
        require(stakedAmounts[_account] >= _amount, "RewardTracker: _amount exceeds stakedAmount");

        stakedAmounts[_account] = stakedAmount.sub(_amount);

        uint256 depositBalance = depositBalances[_account][_depositToken];
        require(depositBalance >= _amount, "RewardTracker: _amount exceeds depositBalance");
        depositBalances[_account][_depositToken] = depositBalance.sub(_amount);

        _burn(_account, _amount);
        IERC20(_depositToken).safeTransfer(_receiver, _amount);
    }

    function _updateRewards(address _account) private {
        uint256 blockReward = IRewardDistributor(distributor).distribute();

        uint256 supply = totalSupply;
        uint256 _cumulativeRewardPerToken = cumulativeRewardPerToken;
        if (supply > 0 && blockReward > 0) {
            _cumulativeRewardPerToken = _cumulativeRewardPerToken.add(blockReward.mul(PRECISION).div(supply));
            cumulativeRewardPerToken = _cumulativeRewardPerToken;
        }

        // cumulativeRewardPerToken can only increase
        // so if cumulativeRewardPerToken is zero, it means there are no rewards yet
        if (_cumulativeRewardPerToken == 0) {
            return;
        }

        if (_account != address(0)) {
            uint256 stakedAmount = stakedAmounts[_account];
            uint256 accountReward = stakedAmount.mul(_cumulativeRewardPerToken.sub(previousCumulatedRewardPerToken[_account])).div(PRECISION);
            uint256 _claimableReward = claimableReward[_account].add(accountReward);

            claimableReward[_account] = _claimableReward;
            previousCumulatedRewardPerToken[_account] = _cumulativeRewardPerToken;

            if (_claimableReward > 0 && stakedAmounts[_account] > 0) {
                uint256 nextCumulativeReward = cumulativeRewards[_account].add(accountReward);

                averageStakedAmounts[_account] = averageStakedAmounts[_account].mul(cumulativeRewards[_account]).div(nextCumulativeReward)
                    .add(stakedAmount.mul(accountReward).div(nextCumulativeReward));

                cumulativeRewards[_account] = nextCumulativeReward;
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "./IERC20.sol";
import "../math/SafeMath.sol";
import "../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "contracts/staking/RewardTracker.sol": "RewardTracker"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1
  },
  "remappings": []
}