Ordinal Edgehogs

// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// (((((('########:'########:::'######:::'########:'##::::'##::'#######:::'######::::'######::(((((
// (((((( ##.....:: ##.... ##:'##... ##:: ##.....:: ##:::: ##:'##.... ##:'##... ##::'##... ##:(((((
// (((((( ##::::::: ##:::: ##: ##:::..::: ##::::::: ##:::: ##: ##:::: ##: ##:::..::: ##:::..::(((((
// (((((( ######::: ##:::: ##: ##::'####: ######::: #########: ##:::: ##: ##::'####:. ######::(((((
// (((((( ##...:::: ##:::: ##: ##::: ##:: ##...:::: ##.... ##: ##:::: ##: ##::: ##:::..... ##:(((((
// (((((( ##::::::: ##:::: ##: ##::: ##:: ##::::::: ##:::: ##: ##:::: ##: ##::: ##::'##::: ##:(((((
// (((((( ########: ########::. ######::: ########: ##:::: ##:. #######::. ######:::. ######::(((((
// ((((((........::........::::......::::........::..:::::..:::.......:::ORDINALS::::......:::(((((
// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// SPDX-License-Identifier: MIT

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
  /**
   * @dev Returns true if this contract implements the interface defined by
   * `interfaceId`. See the corresponding
   * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
   * to learn more about how these ids are created.
   *
   * This function call must use less than 30 000 gas.
   */
  function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(bytes4 interfaceId)
    public
    view
    virtual
    override
    returns (bool)
  {
    return interfaceId == type(IERC165).interfaceId;
  }
}

// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
  /**
   * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
   */
  event Transfer(
    address indexed from,
    address indexed to,
    uint256 indexed tokenId
  );

  /**
   * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
   */
  event Approval(
    address indexed owner,
    address indexed approved,
    uint256 indexed tokenId
  );

  /**
   * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
   */
  event ApprovalForAll(
    address indexed owner,
    address indexed operator,
    bool approved
  );

  /**
   * @dev Returns the number of tokens in ``owner``'s account.
   */
  function balanceOf(address owner) external view returns (uint256 balance);

  /**
   * @dev Returns the owner of the `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function ownerOf(uint256 tokenId) external view returns (address owner);

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
   * are aware of the ERC721 protocol to prevent tokens from being forever locked.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) external;

  /**
   * @dev Transfers `tokenId` token from `from` to `to`.
   *
   * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) external;

  /**
   * @dev Gives permission to `to` to transfer `tokenId` token to another account.
   * The approval is cleared when the token is transferred.
   *
   * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
   *
   * Requirements:
   *
   * - The caller must own the token or be an approved operator.
   * - `tokenId` must exist.
   *
   * Emits an {Approval} event.
   */
  function approve(address to, uint256 tokenId) external;

  /**
   * @dev Returns the account approved for `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function getApproved(uint256 tokenId)
    external
    view
    returns (address operator);

  /**
   * @dev Approve or remove `operator` as an operator for the caller.
   * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
   *
   * Requirements:
   *
   * - The `operator` cannot be the caller.
   *
   * Emits an {ApprovalForAll} event.
   */
  function setApprovalForAll(address operator, bool _approved) external;

  /**
   * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
   *
   * See {setApprovalForAll}
   */
  function isApprovedForAll(address owner, address operator)
    external
    view
    returns (bool);

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes calldata data
  ) external;
}
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    constructor() {
        _transferOwnership(_msgSender());
    }

    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    function owner() public view virtual returns (address) {
        return _owner;
    }

    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }


    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


pragma solidity ^0.8.0;

library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    function toString(uint256 value) internal pure returns (string memory) {

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}



pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}


pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // The next token ID to be minted.
    uint256 private _currentIndex;

    // The number of tokens burned.
    uint256 private _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned.
    // See {_packedOwnershipOf} implementation for details.
    //
    // Bits Layout:
    // - [0..159]   `addr`
    // - [160..223] `startTimestamp`
    // - [224]      `burned`
    // - [225]      `nextInitialized`
    // - [232..255] `extraData`
    mapping(uint256 => uint256) private _packedOwnerships;

    // Mapping owner address to address data.
    //
    // Bits Layout:
    // - [0..63]    `balance`
    // - [64..127]  `numberMinted`
    // - [128..191] `numberBurned`
    // - [192..255] `aux`
    mapping(address => uint256) private _packedAddressData;

    // Mapping from token ID to approved address.
    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than `_currentIndex - _startTokenId()` times.
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return _burnCounter;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = _packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        _packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnerships[index]);
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (_packedOwnerships[index] == 0) {
            _packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {
        if (_startTokenId() <= tokenId) {
            packed = _packedOwnerships[tokenId];
            // If not burned.
            if (packed & _BITMASK_BURNED == 0) {
                // If the data at the starting slot does not exist, start the scan.
                if (packed == 0) {
                    if (tokenId >= _currentIndex) revert OwnerQueryForNonexistentToken();
                    // Invariant:
                    // There will always be an initialized ownership slot
                    // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                    // before an unintialized ownership slot
                    // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                    // Hence, `tokenId` will not underflow.
                    //
                    // We can directly compare the packed value.
                    // If the address is zero, packed will be zero.
                    for (;;) {
                        unchecked {
                            packed = _packedOwnerships[--tokenId];
                        }
                        if (packed == 0) continue;
                        return packed;
                    }
                }
                // Otherwise, the data exists and is not burned. We can skip the scan.
                // This is possible because we have already achieved the target condition.
                // This saves 2143 gas on transfers of initialized tokens.
                return packed;
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        _approve(to, tokenId, true);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return
            _startTokenId() <= tokenId &&
            tokenId < _currentIndex && // If within bounds,
            _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();

        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --_packedAddressData[from]; // Updates: `balance -= 1`.
            ++_packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                revert TransferToNonERC721ReceiverImplementer();
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
            bytes4 retval
        ) {
            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            uint256 toMasked;
            uint256 end = startTokenId + quantity;

            // Use assembly to loop and emit the `Transfer` event for gas savings.
            // The duplicated `log4` removes an extra check and reduces stack juggling.
            // The assembly, together with the surrounding Solidity code, have been
            // delicately arranged to nudge the compiler into producing optimized opcodes.
            assembly {
                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
                toMasked := and(to, _BITMASK_ADDRESS)
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    startTokenId // `tokenId`.
                )

                // The `iszero(eq(,))` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
                // The compiler will optimize the `iszero` away for performance.
                for {
                    let tokenId := add(startTokenId, 1)
                } iszero(eq(tokenId, end)) {
                    tokenId := add(tokenId, 1)
                } {
                    // Emit the `Transfer` event. Similar to above.
                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
                }
            }
            if (toMasked == 0) revert MintToZeroAddress();

            _currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            _currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = _currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (index < end);
                // Reentrancy protection.
                if (_currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    // =============================================================
    //                       APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_approve(to, tokenId, false)`.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _approve(to, tokenId, false);
    }

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        bool approvalCheck
    ) internal virtual {
        address owner = ownerOf(tokenId);

        if (approvalCheck)
            if (_msgSenderERC721A() != owner)
                if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                    revert ApprovalCallerNotOwnerNorApproved();
                }

        _tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = _packedOwnerships[index];
        if (packed == 0) revert OwnershipNotInitializedForExtraData();
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        _packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 */
library MerkleProof {
  /**
   * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
   * defined by `root`. For this, a `proof` must be provided, containing
   * sibling hashes on the branch from the leaf to the root of the tree. Each
   * pair of leaves and each pair of pre-images are assumed to be sorted.
   */
  function verify(
    bytes32[] memory proof,
    bytes32 root,
    bytes32 leaf
  ) internal pure returns (bool) {
    return processProof(proof, leaf) == root;
  }

  /**
   * @dev Calldata version of {verify}
   *
   * _Available since v4.7._
   */
  function verifyCalldata(
    bytes32[] calldata proof,
    bytes32 root,
    bytes32 leaf
  ) internal pure returns (bool) {
    return processProofCalldata(proof, leaf) == root;
  }

  /**
   * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
   * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
   * hash matches the root of the tree. When processing the proof, the pairs
   * of leafs & pre-images are assumed to be sorted.
   *
   * _Available since v4.4._
   */
  function processProof(bytes32[] memory proof, bytes32 leaf)
    internal
    pure
    returns (bytes32)
  {
    bytes32 computedHash = leaf;
    for (uint256 i = 0; i < proof.length; i++) {
      computedHash = _hashPair(computedHash, proof[i]);
    }
    return computedHash;
  }

  /**
   * @dev Calldata version of {processProof}
   *
   * _Available since v4.7._
   */
  function processProofCalldata(bytes32[] calldata proof, bytes32 leaf)
    internal
    pure
    returns (bytes32)
  {
    bytes32 computedHash = leaf;
    for (uint256 i = 0; i < proof.length; i++) {
      computedHash = _hashPair(computedHash, proof[i]);
    }
    return computedHash;
  }

  /**
   * @dev Returns true if the `leaves` can be proved to be a part of a Merkle tree defined by
   * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
   *
   * _Available since v4.7._
   */
  function multiProofVerify(
    bytes32[] memory proof,
    bool[] memory proofFlags,
    bytes32 root,
    bytes32[] memory leaves
  ) internal pure returns (bool) {
    return processMultiProof(proof, proofFlags, leaves) == root;
  }

  /**
   * @dev Calldata version of {multiProofVerify}
   *
   * _Available since v4.7._
   */
  function multiProofVerifyCalldata(
    bytes32[] calldata proof,
    bool[] calldata proofFlags,
    bytes32 root,
    bytes32[] memory leaves
  ) internal pure returns (bool) {
    return processMultiProofCalldata(proof, proofFlags, leaves) == root;
  }

  /**
   * @dev Returns the root of a tree reconstructed from `leaves` and the sibling nodes in `proof`,
   * consuming from one or the other at each step according to the instructions given by
   * `proofFlags`.
   *
   * _Available since v4.7._
   */
  function processMultiProof(
    bytes32[] memory proof,
    bool[] memory proofFlags,
    bytes32[] memory leaves
  ) internal pure returns (bytes32 merkleRoot) {
    // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
    // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
    // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
    // the merkle tree.
    uint256 leavesLen = leaves.length;
    uint256 totalHashes = proofFlags.length;

    // Check proof validity.
    require(
      leavesLen + proof.length - 1 == totalHashes,
      "MerkleProof: invalid multiproof"
    );

    // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
    // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
    bytes32[] memory hashes = new bytes32[](totalHashes);
    uint256 leafPos = 0;
    uint256 hashPos = 0;
    uint256 proofPos = 0;
    // At each step, we compute the next hash using two values:
    // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
    //   get the next hash.
    // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
    //   `proof` array.
    for (uint256 i = 0; i < totalHashes; i++) {
      bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
      bytes32 b = proofFlags[i]
        ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++]
        : proof[proofPos++];
      hashes[i] = _hashPair(a, b);
    }

    if (totalHashes > 0) {
      return hashes[totalHashes - 1];
    } else if (leavesLen > 0) {
      return leaves[0];
    } else {
      return proof[0];
    }
  }

  /**
   * @dev Calldata version of {processMultiProof}
   *
   * _Available since v4.7._
   */
  function processMultiProofCalldata(
    bytes32[] calldata proof,
    bool[] calldata proofFlags,
    bytes32[] memory leaves
  ) internal pure returns (bytes32 merkleRoot) {
    // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
    // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
    // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
    // the merkle tree.
    uint256 leavesLen = leaves.length;
    uint256 totalHashes = proofFlags.length;

    // Check proof validity.
    require(
      leavesLen + proof.length - 1 == totalHashes,
      "MerkleProof: invalid multiproof"
    );

    // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
    // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
    bytes32[] memory hashes = new bytes32[](totalHashes);
    uint256 leafPos = 0;
    uint256 hashPos = 0;
    uint256 proofPos = 0;
    // At each step, we compute the next hash using two values:
    // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
    //   get the next hash.
    // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
    //   `proof` array.
    for (uint256 i = 0; i < totalHashes; i++) {
      bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
      bytes32 b = proofFlags[i]
        ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++]
        : proof[proofPos++];
      hashes[i] = _hashPair(a, b);
    }

    if (totalHashes > 0) {
      return hashes[totalHashes - 1];
    } else if (leavesLen > 0) {
      return leaves[0];
    } else {
      return proof[0];
    }
  }

  function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
    return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
  }

  function _efficientHash(bytes32 a, bytes32 b)
    private
    pure
    returns (bytes32 value)
  {
    /// @solidity memory-safe-assembly
    assembly {
      mstore(0x00, a)
      mstore(0x20, b)
      value := keccak256(0x00, 0x40)
    }
  }
}



/////////////////////////////////////////
/////🦔INTERFACES🦔/////////////////////
////////////////////////////////////////

pragma solidity ^0.8.19;
interface InterfaceDescriptor {
        function tokenURI(uint256 _tokenId, uint256 _tokenSeed) external view returns (string memory);
    }

// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// (((((('########:'########:::'######:::'########:'##::::'##::'#######:::'######::::'######::(((((
// (((((( ##.....:: ##.... ##:'##... ##:: ##.....:: ##:::: ##:'##.... ##:'##... ##::'##... ##:(((((
// (((((( ##::::::: ##:::: ##: ##:::..::: ##::::::: ##:::: ##: ##:::: ##: ##:::..::: ##:::..::(((((
// (((((( ######::: ##:::: ##: ##::'####: ######::: #########: ##:::: ##: ##::'####:. ######::(((((
// (((((( ##...:::: ##:::: ##: ##::: ##:: ##...:::: ##.... ##: ##:::: ##: ##::: ##:::..... ##:(((((
// (((((( ##::::::: ##:::: ##: ##::: ##:: ##::::::: ##:::: ##: ##:::: ##: ##::: ##::'##::: ##:(((((
// (((((( ########: ########::. ######::: ########: ##:::: ##:. #######::. ######:::. ######::(((((
// ((((((........::........::::......::::........::..:::::..:::.......:::ORDINALS::::......:::(((((
// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((
// (((((((((((((((((((((((((((((((((%%%(((%%%(((%%%(((%%%%%%(((((((((((((((((((((((((((((((((((((((
// (((((((((((((((((((((((((((((((((@@@(((@@@(((@@@(((@@@@@@(((((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((((((((@@@(((@@@&&&@@@&&&@@@%%%@@@%%%%%%@@@((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((((((((@@@@@@&&&%%%&&&%%%%%%###%%%###%%%###@@@(((((((((((((((((((((((((((((((((
// (((((((((((((((((((((@@@&&&%%%######%%%%%%######%%%###%%%###%%%@@@((((((((((((((((((((((((((((((
// ((((((((((((((((((@@@&&&&&&&&&%%%###%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@@@(((((((((((((((((((((((((((
// ((((((((((((######&&&&&&%%%&&&%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@@@#########((((((((((((((((((
// ((((((((((((@@@@@@&&&&&&###@@@@@@@@@###%%%%%%%%%%%%%%%%%%%%%%%%%%%@@@@@@@@@@@@((((((((((((((((((
// (((((((((((((((@@@&&&%%%###@@@******%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@@@******&@@((((((((((((((((((
// (((((((((((((((@@@&&&%%%###%%%@@@***%%%///,,,,,,,,,%%%%%%*,,,,,,,,///***&@@(((((((((((((((((((((
// (((((((((@@@@@@&&&&&&&&&%%%%%%%%%@@@(//,,,,,,,,,,,,,,,,,,,,,,,,//////###@@@(((((((((((((((((((((
// ((((((((((((@@@&&&%%%%%%%%%%%%%%%@@@(//,,,,,,@@@   ,,,,,,,,,///@@@   ###@@@(((((((((((((((((((((
// ((((((((((((@@@&&&%%%%%%%%%%%%%%%@@@(//,,,,,,@@@   ,,,,,,,,,///@@@   ###@@@(((((((((((((((((((((
// (((((((((@@@@@@%%%&&&%%%%%%%%%%%%@@@(//,,,,,,@@@@@@*,,,,,,,,,,,@@@@@@###@@@(((((((((((((((((((((
// ((((((((((((@@@&&&&&&%%%###%%%%%%@@@(//////////////,,,,,,,,,,,,//////&@@((((((((((((((((((((((((
// (((((((((@@@&&&%%%&&&%%%%%%%%%@@@###//////,,,,,,,,,,,,,,,,,,@@@@@@(//&@@((((((((((((((((((((((((
// (((((((((@@@&&&&&&&&&%%%###@@@#########@@@(///////////,,,@@@@@@@@@@@@(((((((((((((((((((((((((((
// (((((((((@@@&&&%%%&&&&&&###@@@###//////###@@@@@@@@@@@@@@@@@@@@@@@@((((((((((((((((((((((((((((((
// (((((((((@@@&&&%%%&&&&&&###@@@###//////###@@@@@@@@@@@@@@@@@@@@@@@@((((((((((((((((((((((((((((((
// (((((((((@@@&&&%%%######@@@###///////////////###############@@@(((((((((((((((((((((((((((((((((
// ((((((@@@&&&&&&%%%&&&###@@@###/////////,,,,,,,,,,,,//////###@@@(((((((((((((((((((((((((((((((((
// (((((((((@@@&&&%%%&&&@@@###/////////,,,,,,,,,,,,,,,,,,//////&@@@@@((((((((((((((((((((((((((((((
// ((((((@@@&&&&&&%%%###@@@###/////////,,,,,,,,,,,,,,,,,,,,,///&@@(//&@@(((((((((((((((((((((((((((
// (((((((((@@@&&&%%%###@@@######@@@(//,,,,,,,,,,,,,,,,,,,,,///&@@(//&@@(((((((((((((((((((((((((((
// (((((((((@@@&&&%%%###@@@######@@@(//,,,,,,,,,,,,,,,,,,,,,///&@@(//&@@(((((((((((((((((((((((((((
// (((((((((@@@&&&&&&&&&@@@###///@@@(//,,,,,,,,,,,,,,,,,,,,,///&@@(//&@@(((((((((((((((((((((((((((
// ((((((@@@&&&&&&&&&###@@@###///@@@(//,,,,,,,,,,,,,,,,,,//////&@@(//&@@(((((((((((((((((((((((((((
// (((((((((@@@&&&&&&%%%###@@@@@@(////////,,,,,,,,,,,,,,,//////&@@@@@((((((((((((((((((((((((((((((
// ((((((((((((@@@&&&%%%%%%@@@###////////////,,,,,,,,,/////////&@@(((((((((((((((((((((((((((((((((
// (((((((((((((((@@@######@@@###///////////////////////////&@@((((((((((((((((((((((((((((((((((((
// (((((((((((((((@@@######@@@###///////////////////////////&@@((((((((((((((((((((((((((((((((((((
// ((((((((((((((((((@@@@@@@@@###///@@@@@@@@@@@@@@@###///&@@(((((((((((((by((@spiridono((((((((((((
// ((((((((((((((((((((((((@@@###///@@@(((((((((@@@###///&@@(((((((((((((((((((((((((((((((((((((((


pragma solidity ^0.8.19;
contract OrdinalEdgehogs is Ownable, ERC721A {
    using Strings for uint256;

    bool public isPublicMintEnabled = false;
    bool public isWLmintEnabled = false;
    uint public maxSupply = 2222;
    uint public costPublic = 0.025 ether;
    uint public costWL = 0.01 ether;
    uint public maxMintPublic = 10; //per wallet
    uint public maxMintWL = 1; //per wallet
    uint public maxRerolls = 1; // per wallet

    //diverts tokenURI calls to external contract
    InterfaceDescriptor public descriptor;

    bytes32 public _merkleRoot;

    mapping(address => uint256) public mintedByAddressWL;
    mapping(address => uint256) public mintedByAddressPublic;
    mapping(address => uint256) public rerollsMade;

    //save seed for traits for each token
    mapping(uint256 => uint256) public tokenSeed;

    address t = 0x392D50fCFDd5b36E6DdDB22bcB84AA80B8105890; 

    constructor() ERC721A("Ordinal Edgehogs", unicode"⚉") {}

    ///////////////////////////
    //////🦔 MINTING 🦔///////
    ///////////////////////////

    //public mint
    function mint(uint _quantity) external payable {
        require(isPublicMintEnabled, "Not yet");
        require(tx.origin == msg.sender, "No contracts");
        require(totalSupply() + _quantity <= maxSupply, "Would exceed maximum supply");
        require(mintedByAddressPublic[msg.sender] + _quantity <= maxMintPublic, "Would exceed mint limit");
        require(msg.value == costPublic * _quantity, "Ether sent is incorrect");

        uint256 supply = totalSupply();
        for (uint256 i = 1; i <= _quantity; i++) {
        tokenSeed[supply + i] = uint256(
            keccak256(abi.encodePacked(block.timestamp, msg.sender, supply + i))
        );
        }
        mintedByAddressPublic[msg.sender] += _quantity;
        _safeMint(msg.sender, _quantity);
    }

    //WL mint
    function mintWL(uint _quantity, bytes32[] calldata _merkleProof) external payable {
        require(isWLmintEnabled, "Not yet");
        require(tx.origin == msg.sender, "No contracts");
        require(isWhitelisted(msg.sender, _merkleProof), "Not whitelisted");
        require(totalSupply() + _quantity <= maxSupply, "Would exceed maximum supply");
        require(mintedByAddressWL[msg.sender] + _quantity <= maxMintWL, "Would exceed mint limit");
        require(msg.value == costWL * _quantity, "Ether sent is incorrect");

        uint256 supply = totalSupply();
        for (uint256 i = 1; i <= _quantity; i++) {
        tokenSeed[supply + i] = uint256(
            keccak256(abi.encodePacked(block.timestamp, msg.sender, supply + i))
        );
        }
        mintedByAddressWL[msg.sender] += _quantity;
        _safeMint(msg.sender, _quantity);
    }

    //rerolls an edgehog, once per wallet, only until mint out
    function reroll(uint256 _tokenId) external {
        require(totalSupply() < maxSupply, "Reroll inactive");
        require(rerollsMade[msg.sender] < maxRerolls, "No rerolls left");
        require(msg.sender == ownerOf(_tokenId), "You don't own the token or the token does not exist");

        rerollsMade[msg.sender]++;
        tokenSeed[_tokenId] = uint256(
            keccak256(abi.encodePacked(block.timestamp, msg.sender, _tokenId + 1))
        );
        
    }

    //airdrop
    function airdrop(uint256 _quantity, address _recipient) external onlyOwner {
        require(totalSupply() + _quantity <= maxSupply, "Too many");

        uint256 supply = totalSupply();
        for (uint256 i = 1; i <= _quantity; i++) {
        tokenSeed[supply + i] = uint256(
            keccak256(abi.encodePacked(block.timestamp, msg.sender, supply + i))
        );
        }
        _safeMint(_recipient, _quantity);
    }

    ///////////////////////////
    //////🦔 GETTERS 🦔///////
    ///////////////////////////

    // checks if wallet is whitelisted
    function isWhitelisted(address _wallet, bytes32[] calldata _merkleProof)
        public
        view
        returns (bool)
    {
        bytes32 leaf = keccak256(abi.encodePacked(_wallet));
        return MerkleProof.verify(_merkleProof, _merkleRoot, leaf);
    }

    //returns token URI based on revealed status
    function tokenURI(uint256 _tokenId) public view override returns (string memory)
    {
        require(_exists(_tokenId), "URI query for nonexistent token");
        uint256 _tokenSeed = tokenSeed[_tokenId];
        return descriptor.tokenURI(_tokenId, _tokenSeed);
    }

    //returns start token id
    function _startTokenId() internal view virtual override returns (uint256) {
        return 1;
    }

    //returns ids of tokens owned by address
    function tokensOfOwner(address _address) public virtual view returns (uint256[] memory) {
        uint256 _balance = balanceOf(_address);
        uint256[] memory _tokens = new uint256[] (_balance);
        uint256 _index;
        uint256 _loopThrough = totalSupply();
        for (uint256 i = 0; i < _loopThrough; i++) {
            bool _exists = _exists(i);
            if (_exists) {
                if (ownerOf(i) == _address) { _tokens[_index] = i; _index++; }
            }
            else if (!_exists && _tokens[_balance - 1] == 0) { _loopThrough++; }
        }
        return _tokens;
    }

    ///////////////////////////
    //////🦔 SETTERS 🦔///////
    ///////////////////////////

    //set attributes libraries
    function setDescriptor(address _descriptor) external onlyOwner {
        descriptor = InterfaceDescriptor(_descriptor);
    }

    //sets Merkle Root for WL minting
    function setWhitelistRoot(bytes32 merkleRoot) public onlyOwner {
        _merkleRoot = merkleRoot;
    }

    //flips public sale status
    function setPublicMintEnabled() public onlyOwner {
        isPublicMintEnabled = !isPublicMintEnabled;
        isWLmintEnabled = !isPublicMintEnabled;
    }

    //flips WL sale status
    function setWLmintEnabled() public onlyOwner {
        isWLmintEnabled = !isWLmintEnabled;
        isPublicMintEnabled = !isWLmintEnabled;
    }

    //pauses both WL and Public sale
    function setPaused() public onlyOwner {
        isWLmintEnabled = false;
        isPublicMintEnabled = false;
    }

    //sets public cost
    function setCost(uint256 _newCost) external onlyOwner {
        costPublic = _newCost;
    }

    //sets WL cost
    function setCostWL(uint256 _newCostWL) external onlyOwner {
        costWL = _newCostWL;
    }

    //sets maximum mints per transaction for public mint
    function setMaxMintPublic(uint256 _newMaxMintPublic) external onlyOwner {
        maxMintPublic = _newMaxMintPublic;
    }

    //sets maximum mints per wallet for WL mint
    function setMaxMintWL(uint256 _newMaxMintWL) external onlyOwner {
        maxMintWL = _newMaxMintWL;
    }

    //sets maximum rerolls per wallet
    function setMaxRerolls(uint256 _newMaxRerolls) external onlyOwner {
        maxRerolls = _newMaxRerolls;
    }

    ///////////////////////////
    //////🦔 ADMIN 🦔/////////
    ///////////////////////////

    //withdraw funds
    function withdraw() public payable onlyOwner {
      uint256 _share = address(this).balance / 100;
      require(payable(t).send(_share * 100));
    }

//                 \ / \/ \/ / ,
//               \ /  \/ \/  \/  / ,
//             \ \ \/ \/ \/ \ \/ \/ /
//           .\  \/  \/ \/ \/  \/ / / /
//          '  / / \/  \/ \/ \/  \/ \ \/ \
//       .'     ) \/ \/ \/ \/  \/  \/ \ / \
//      /   o    ) \/ \/ \/ \/ \/ \/ \// /
//    o'_ ',__ .'   ,.,.,.,.,.,.,.,'- '%
//             // \\          // \\        gm
//            ''  ''         ''  ''
}

{
  "compilationTarget": {
    "contracts/NFTContract.sol": "OrdinalEdgehogs"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}