// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(
address indexed operator,
address indexed from,
address indexed to,
uint256 id,
uint256 value
);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(
address indexed account,
address indexed operator,
bool approved
);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
external
view
returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator)
external
view
returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
string private _name = 'Aftrmrkt';
string private _symbol = 'Aftrmrkt';
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
function name() public view virtual returns (string memory) {
return _name;
}
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
public
view
virtual
override
returns (uint256)
{
require(
account != address(0),
"ERC1155: balance query for the zero address"
);
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(
accounts.length == ids.length,
"ERC1155: accounts and ids length mismatch"
);
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(
_msgSender() != operator,
"ERC1155: setting approval status for self"
);
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(
operator,
from,
to,
_asSingletonArray(id),
_asSingletonArray(amount),
data
);
uint256 fromBalance = _balances[id][from];
require(
fromBalance >= amount,
"ERC1155: insufficient balance for transfer"
);
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(
fromBalance >= amount,
"ERC1155: insufficient balance for transfer"
);
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(
operator,
from,
to,
ids,
amounts,
data
);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(
operator,
address(0),
account,
_asSingletonArray(id),
_asSingletonArray(amount),
data
);
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(
operator,
address(0),
account,
id,
amount,
data
);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(
operator,
address(0),
to,
ids,
amounts,
data
);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address account,
uint256 id,
uint256 amount
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(
operator,
account,
address(0),
_asSingletonArray(id),
_asSingletonArray(amount),
""
);
uint256 accountBalance = _balances[id][account];
require(
accountBalance >= amount,
"ERC1155: burn amount exceeds balance"
);
unchecked {
_balances[id][account] = accountBalance - amount;
}
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address account,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(
accountBalance >= amount,
"ERC1155: burn amount exceeds balance"
);
unchecked {
_balances[id][account] = accountBalance - amount;
}
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155Received(
operator,
from,
id,
amount,
data
)
returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155BatchReceived(
operator,
from,
ids,
amounts,
data
)
returns (bytes4 response) {
if (
response != IERC1155Receiver.onERC1155BatchReceived.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element)
private
pure
returns (uint256[] memory)
{
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value)
private
view
returns (bool)
{
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index)
private
view
returns (bytes32)
{
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value)
internal
returns (bool)
{
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value)
internal
returns (bool)
{
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value)
internal
view
returns (bool)
{
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index)
internal
view
returns (bytes32)
{
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set)
internal
view
returns (bytes32[] memory)
{
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value)
internal
returns (bool)
{
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index)
internal
view
returns (address)
{
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set)
internal
view
returns (address[] memory)
{
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index)
internal
view
returns (uint256)
{
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set)
internal
view
returns (uint256[] memory)
{
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
interface LinkTokenInterface {
function allowance(address owner, address spender)
external
view
returns (uint256 remaining);
function approve(address spender, uint256 value)
external
returns (bool success);
function balanceOf(address owner) external view returns (uint256 balance);
function decimals() external view returns (uint8 decimalPlaces);
function decreaseApproval(address spender, uint256 addedValue)
external
returns (bool success);
function increaseApproval(address spender, uint256 subtractedValue)
external;
function name() external view returns (string memory tokenName);
function symbol() external view returns (string memory tokenSymbol);
function totalSupply() external view returns (uint256 totalTokensIssued);
function transfer(address to, uint256 value)
external
returns (bool success);
function transferAndCall(
address to,
uint256 value,
bytes calldata data
) external returns (bool success);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool success);
}
contract VRFRequestIDBase {
/**
* @notice returns the seed which is actually input to the VRF coordinator
*
* @dev To prevent repetition of VRF output due to repetition of the
* @dev user-supplied seed, that seed is combined in a hash with the
* @dev user-specific nonce, and the address of the consuming contract. The
* @dev risk of repetition is mostly mitigated by inclusion of a blockhash in
* @dev the final seed, but the nonce does protect against repetition in
* @dev requests which are included in a single block.
*
* @param _userSeed VRF seed input provided by user
* @param _requester Address of the requesting contract
* @param _nonce User-specific nonce at the time of the request
*/
function makeVRFInputSeed(
bytes32 _keyHash,
uint256 _userSeed,
address _requester,
uint256 _nonce
) internal pure returns (uint256) {
return
uint256(
keccak256(abi.encode(_keyHash, _userSeed, _requester, _nonce))
);
}
/**
* @notice Returns the id for this request
* @param _keyHash The serviceAgreement ID to be used for this request
* @param _vRFInputSeed The seed to be passed directly to the VRF
* @return The id for this request
*
* @dev Note that _vRFInputSeed is not the seed passed by the consuming
* @dev contract, but the one generated by makeVRFInputSeed
*/
function makeRequestId(bytes32 _keyHash, uint256 _vRFInputSeed)
internal
pure
returns (bytes32)
{
return keccak256(abi.encodePacked(_keyHash, _vRFInputSeed));
}
}
/** ****************************************************************************
* @notice Interface for contracts using VRF randomness
* *****************************************************************************
* @dev PURPOSE
*
* @dev Reggie the Random Oracle (not his real job) wants to provide randomness
* @dev to Vera the verifier in such a way that Vera can be sure he's not
* @dev making his output up to suit himself. Reggie provides Vera a public key
* @dev to which he knows the secret key. Each time Vera provides a seed to
* @dev Reggie, he gives back a value which is computed completely
* @dev deterministically from the seed and the secret key.
*
* @dev Reggie provides a proof by which Vera can verify that the output was
* @dev correctly computed once Reggie tells it to her, but without that proof,
* @dev the output is indistinguishable to her from a uniform random sample
* @dev from the output space.
*
* @dev The purpose of this contract is to make it easy for unrelated contracts
* @dev to talk to Vera the verifier about the work Reggie is doing, to provide
* @dev simple access to a verifiable source of randomness.
* *****************************************************************************
* @dev USAGE
*
* @dev Calling contracts must inherit from VRFConsumerBase, and can
* @dev initialize VRFConsumerBase's attributes in their constructor as
* @dev shown:
*
* @dev contract VRFConsumer {
* @dev constuctor(<other arguments>, address _vrfCoordinator, address _link)
* @dev VRFConsumerBase(_vrfCoordinator, _link) public {
* @dev <initialization with other arguments goes here>
* @dev }
* @dev }
*
* @dev The oracle will have given you an ID for the VRF keypair they have
* @dev committed to (let's call it keyHash), and have told you the minimum LINK
* @dev price for VRF service. Make sure your contract has sufficient LINK, and
* @dev call requestRandomness(keyHash, fee, seed), where seed is the input you
* @dev want to generate randomness from.
*
* @dev Once the VRFCoordinator has received and validated the oracle's response
* @dev to your request, it will call your contract's fulfillRandomness method.
*
* @dev The randomness argument to fulfillRandomness is the actual random value
* @dev generated from your seed.
*
* @dev The requestId argument is generated from the keyHash and the seed by
* @dev makeRequestId(keyHash, seed). If your contract could have concurrent
* @dev requests open, you can use the requestId to track which seed is
* @dev associated with which randomness. See VRFRequestIDBase.sol for more
* @dev details. (See "SECURITY CONSIDERATIONS" for principles to keep in mind,
* @dev if your contract could have multiple requests in flight simultaneously.)
*
* @dev Colliding `requestId`s are cryptographically impossible as long as seeds
* @dev differ. (Which is critical to making unpredictable randomness! See the
* @dev next section.)
*
* *****************************************************************************
* @dev SECURITY CONSIDERATIONS
*
* @dev A method with the ability to call your fulfillRandomness method directly
* @dev could spoof a VRF response with any random value, so it's critical that
* @dev it cannot be directly called by anything other than this base contract
* @dev (specifically, by the VRFConsumerBase.rawFulfillRandomness method).
*
* @dev For your users to trust that your contract's random behavior is free
* @dev from malicious interference, it's best if you can write it so that all
* @dev behaviors implied by a VRF response are executed *during* your
* @dev fulfillRandomness method. If your contract must store the response (or
* @dev anything derived from it) and use it later, you must ensure that any
* @dev user-significant behavior which depends on that stored value cannot be
* @dev manipulated by a subsequent VRF request.
*
* @dev Similarly, both miners and the VRF oracle itself have some influence
* @dev over the order in which VRF responses appear on the blockchain, so if
* @dev your contract could have multiple VRF requests in flight simultaneously,
* @dev you must ensure that the order in which the VRF responses arrive cannot
* @dev be used to manipulate your contract's user-significant behavior.
*
* @dev Since the ultimate input to the VRF is mixed with the block hash of the
* @dev block in which the request is made, user-provided seeds have no impact
* @dev on its economic security properties. They are only included for API
* @dev compatability with previous versions of this contract.
*
* @dev Since the block hash of the block which contains the requestRandomness
* @dev call is mixed into the input to the VRF *last*, a sufficiently powerful
* @dev miner could, in principle, fork the blockchain to evict the block
* @dev containing the request, forcing the request to be included in a
* @dev different block with a different hash, and therefore a different input
* @dev to the VRF. However, such an attack would incur a substantial economic
* @dev cost. This cost scales with the number of blocks the VRF oracle waits
* @dev until it calls responds to a request.
*/
abstract contract VRFConsumerBase is VRFRequestIDBase {
/**
* @notice fulfillRandomness handles the VRF response. Your contract must
* @notice implement it. See "SECURITY CONSIDERATIONS" above for important
* @notice principles to keep in mind when implementing your fulfillRandomness
* @notice method.
*
* @dev VRFConsumerBase expects its subcontracts to have a method with this
* @dev signature, and will call it once it has verified the proof
* @dev associated with the randomness. (It is triggered via a call to
* @dev rawFulfillRandomness, below.)
*
* @param requestId The Id initially returned by requestRandomness
* @param randomness the VRF output
*/
function fulfillRandomness(bytes32 requestId, uint256 randomness)
internal
virtual;
/**
* @dev In order to keep backwards compatibility we have kept the user
* seed field around. We remove the use of it because given that the blockhash
* enters later, it overrides whatever randomness the used seed provides.
* Given that it adds no security, and can easily lead to misunderstandings,
* we have removed it from usage and can now provide a simpler API.
*/
uint256 private constant USER_SEED_PLACEHOLDER = 0;
/**
* @notice requestRandomness initiates a request for VRF output given _seed
*
* @dev The fulfillRandomness method receives the output, once it's provided
* @dev by the Oracle, and verified by the vrfCoordinator.
*
* @dev The _keyHash must already be registered with the VRFCoordinator, and
* @dev the _fee must exceed the fee specified during registration of the
* @dev _keyHash.
*
* @dev The _seed parameter is vestigial, and is kept only for API
* @dev compatibility with older versions. It can't *hurt* to mix in some of
* @dev your own randomness, here, but it's not necessary because the VRF
* @dev oracle will mix the hash of the block containing your request into the
* @dev VRF seed it ultimately uses.
*
* @param _keyHash ID of public key against which randomness is generated
* @param _fee The amount of LINK to send with the request
*
* @return requestId unique ID for this request
*
* @dev The returned requestId can be used to distinguish responses to
* @dev concurrent requests. It is passed as the first argument to
* @dev fulfillRandomness.
*/
function requestRandomness(bytes32 _keyHash, uint256 _fee)
internal
returns (bytes32 requestId)
{
LINK.transferAndCall(
vrfCoordinator,
_fee,
abi.encode(_keyHash, USER_SEED_PLACEHOLDER)
);
// This is the seed passed to VRFCoordinator. The oracle will mix this with
// the hash of the block containing this request to obtain the seed/input
// which is finally passed to the VRF cryptographic machinery.
uint256 vRFSeed = makeVRFInputSeed(
_keyHash,
USER_SEED_PLACEHOLDER,
address(this),
nonces[_keyHash]
);
// nonces[_keyHash] must stay in sync with
// VRFCoordinator.nonces[_keyHash][this], which was incremented by the above
// successful LINK.transferAndCall (in VRFCoordinator.randomnessRequest).
// This provides protection against the user repeating their input seed,
// which would result in a predictable/duplicate output, if multiple such
// requests appeared in the same block.
nonces[_keyHash] = nonces[_keyHash] + 1;
return makeRequestId(_keyHash, vRFSeed);
}
LinkTokenInterface internal immutable LINK;
address private immutable vrfCoordinator;
// Nonces for each VRF key from which randomness has been requested.
//
// Must stay in sync with VRFCoordinator[_keyHash][this]
mapping(bytes32 => uint256) /* keyHash */ /* nonce */
private nonces;
/**
* @param _vrfCoordinator address of VRFCoordinator contract
* @param _link address of LINK token contract
*
* @dev https://docs.chain.link/docs/link-token-contracts
*/
constructor(address _vrfCoordinator, address _link) {
vrfCoordinator = _vrfCoordinator;
LINK = LinkTokenInterface(_link);
}
// rawFulfillRandomness is called by VRFCoordinator when it receives a valid VRF
// proof. rawFulfillRandomness then calls fulfillRandomness, after validating
// the origin of the call
function rawFulfillRandomness(bytes32 requestId, uint256 randomness)
external
{
require(
msg.sender == vrfCoordinator,
"Only VRFCoordinator can fulfill"
);
fulfillRandomness(requestId, randomness);
}
}
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
// Check if the computed hash (root) is equal to the provided root
return computedHash == root;
}
}
contract Aftrmrkt is ERC1155, Ownable, VRFConsumerBase {
using SafeMath for uint256;
using Strings for uint256;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableSet for EnumerableSet.AddressSet;
bytes32 public merkleRoot;
bool public mainSale = false;
bool public preSale = false;
bool public paused = false;
bool public breedingMinted = false;
bool public reservedMinted = false;
// Chainlink variables ----------
bytes32 internal keyHash = 0xAA77729D3466CA35AE8D28B3BBAC7CC36A5031EFDC430821C02BC31A238AF445;
address VRFCoordinator = 0xf0d54349aDdcf704F77AE15b96510dEA15cb7952;
address LinkToken = 0x514910771AF9Ca656af840dff83E8264EcF986CA;
uint256 public fee = 2 ether;
uint256 public minPerTxn = 10;
uint256 public supplyLimit = 19150;
//Pack Limit
uint256 public PremiumPack = 337;
uint256 public FreshPack = 2375;
uint256 public StarterPack = 4914;
//Premium Pack Limit
uint256 public PPEliteCardLimit = 337;
uint256 public PPRareCardLimit = 337;
uint256 public PPFreshCardLimit = 337;
uint256 public PPCommonCardLimit = 674;
//Fresh Pack Limit
uint256 public FPRareCardLimit = 829;
uint256 public FPFreshCardLimit = 4650;
uint256 public FPCommonCardLimit = 1646;
//Starter Pack Limit
uint256 public SPFreshCardLimit = 449;
uint256 public SPCommonCardLimit = 9379;
//Pack Fees Pre-Sale
uint256 public PremiumPackFeePreSale = 0.4 ether;
uint256 public FreshPackFeePreSale = 0.12 ether;
uint256 public StarterPackFeePreSale = 0.046 ether;
//Pack Fees Public
uint256 public PremiumPackFee = 0.41 ether;
uint256 public FreshPackFee = 0.13 ether;
uint256 public StarterPackFee = 0.055 ether;
//Total Cards Per Pack
uint256 public freshPackCards = 7125;
uint256 public basePackCards = 9828;
uint256 public premiumPackCards = 1685;
uint256 public randomResult;
string public baseURI;
enum Pack {
PREMIUM,
FRESH,
BASE
}
address[] public addressList = [
0xE1D1f06282266B72E7aD3374F4E68386da17CD89,
0xc300605c136A6995A27E34391cAB9344e881F589,
0x7972174DA20702D2cbAabfBB8897Ae4185a82B9A
];
uint256[] public shareList = [87,10,3];
mapping(uint256 => uint256) public totalSupply;
mapping(bytes32 => Pack) requestToPack;
mapping(bytes32 => address) requestTouser;
mapping(uint256 => uint256) public supplyOf;
EnumerableSet.UintSet elite;
EnumerableSet.UintSet rare;
EnumerableSet.UintSet fresh;
EnumerableSet.UintSet common;
constructor() ERC1155("https://gateway.pinata.cloud/ipfs/Qmev1bGgMSaP9J8eLKuApuZeqTYen7sJjoqf2KeXvbrBnx/") VRFConsumerBase(VRFCoordinator, LinkToken) {
{
elite.add(4);
supplyOf[4] = 50;
elite.add(10);
supplyOf[10] = 50;
elite.add(12);
supplyOf[12] = 50;
elite.add(19);
supplyOf[19] = 50;
elite.add(23);
supplyOf[23] = 50;
elite.add(26);
supplyOf[26] = 50;
elite.add(29);
supplyOf[29] = 50;
}
{
rare.add(2);
supplyOf[2] = 150;
rare.add(5);
supplyOf[5] = 150;
rare.add(8);
supplyOf[8] = 150;
rare.add(13);
supplyOf[13] = 150;
rare.add(14);
supplyOf[14] = 150;
rare.add(21);
supplyOf[21] = 150;
rare.add(22);
supplyOf[22] = 150;
rare.add(28);
supplyOf[28] = 150;
}
{
fresh.add(1);
supplyOf[1] = 800;
fresh.add(3);
supplyOf[3] = 800;
fresh.add(6);
supplyOf[6] = 800;
fresh.add(7);
supplyOf[7] = 800;
fresh.add(16);
supplyOf[16] = 800;
fresh.add(17);
supplyOf[17] = 800;
fresh.add(24);
supplyOf[24] = 800;
}
{
common.add(9);
supplyOf[9] = 1500;
common.add(11);
supplyOf[11] = 1500;
common.add(15);
supplyOf[15] = 1500;
common.add(18);
supplyOf[18] = 1500;
common.add(20);
supplyOf[20] = 1500;
common.add(25);
supplyOf[25] = 1500;
common.add(27);
supplyOf[27] = 1500;
common.add(30);
supplyOf[30] = 1500;
}
address beneficiary = 0x7972174DA20702D2cbAabfBB8897Ae4185a82B9A;
//Fresh Pack Mint
_mint(beneficiary, 1, 20, "");
_mint(beneficiary, 3, 20, "");
_mint(beneficiary, 6, 20, "");
_mint(beneficiary, 7, 20, "");
_mint(beneficiary, 16, 20, "");
_mint(beneficiary, 17, 20, "");
_mint(beneficiary, 24, 19, "");
//Rare Pack Mint
_mint(beneficiary, 2, 4, "");
_mint(beneficiary, 5, 4, "");
_mint(beneficiary, 8, 4, "");
_mint(beneficiary, 13, 4, "");
_mint(beneficiary, 14, 4, "");
_mint(beneficiary, 21, 3, "");
_mint(beneficiary, 22, 3, "");
_mint(beneficiary, 28, 3, "");
//Elite Pack Mint
_mint(beneficiary, 4, 2, "");
_mint(beneficiary, 10, 1, "");
_mint(beneficiary, 12, 1, "");
_mint(beneficiary, 19, 1, "");
_mint(beneficiary, 23, 1, "");
_mint(beneficiary, 26, 1, "");
_mint(beneficiary, 29, 1, "");
//Comman Pack Mint
_mint(beneficiary, 9, 38, "");
_mint(beneficiary, 11, 38, "");
_mint(beneficiary, 15, 38, "");
_mint(beneficiary, 18, 37, "");
_mint(beneficiary, 20, 37, "");
_mint(beneficiary, 25, 37, "");
_mint(beneficiary, 27, 37, "");
_mint(beneficiary, 30, 37, "");
}
function setPreSaleStatus(bool _status) public onlyOwner {
require(preSale != _status);
preSale = _status;
}
function setSaleStatus(bool _status) public onlyOwner {
require(mainSale != _status);
mainSale = _status;
}
function pause() public onlyOwner {
paused = !paused;
}
function setPremiumPackFee(uint256 _premiumPackFee) external onlyOwner {
PremiumPackFee = _premiumPackFee;
}
function setFreshPackFee(uint256 _freshPackFee) external onlyOwner {
FreshPackFee = _freshPackFee;
}
function setStarterPackFee(uint256 _basePackFee) external onlyOwner {
StarterPackFee = _basePackFee;
}
function setPreSalePremiumPackFee(uint256 _premiumPackFee) external onlyOwner {
PremiumPackFeePreSale = _premiumPackFee;
}
function setPreSaleFreshPackFee(uint256 _freshPackFee) external onlyOwner {
FreshPackFeePreSale = _freshPackFee;
}
function setPreSaleStarterPackFee(uint256 _basePackFee) external onlyOwner {
StarterPackFeePreSale = _basePackFee;
}
function uri(uint256 id) public view override returns (string memory) {
require(id > 0, "Aftrmrkt::uri: Invalid id.");
return string(abi.encodePacked(baseURI, "/", id.toString(), ".json"));
}
function setBaseURI(string memory _baseURI) public onlyOwner {
require(
bytes(_baseURI).length > 0,
"Aftrmrkt::setBaseURI: Invalid base URI."
);
baseURI = _baseURI;
}
function getLinkBalance() external view returns (uint256) {
return LINK.balanceOf(address(this));
}
function withdrawLink() external onlyOwner {
LINK.transfer(owner(), LINK.balanceOf(address(this)));
}
function withdrawAll() public onlyOwner {
uint256 balance = address(this).balance;
for (uint256 i = 0; i < addressList.length; i++) {
payable(addressList[i]).transfer(balance.mul(shareList[i]).div(100));
}
}
function updateMerkleRoot(bytes32 newRoot) external onlyOwner {
merkleRoot = newRoot;
}
function getValues() external view returns (uint256[] memory, uint256[] memory, uint256[] memory, uint256[] memory)
{
return (elite.values(), rare.values(), fresh.values(), common.values());
}
function buyPresalePremiumPack(uint256 count, bytes32[] calldata merkleProof) external payable {
bytes32 node = keccak256(abi.encodePacked(msg.sender));
require(!paused, "the contract is paused");
require(preSale, "Aftmrkt::preCheck: presale is not active");
require(
PremiumPack >= count,
"Aftmrkt::buyPremiumPack: PremiumPacks are sold out."
);
require(
MerkleProof.verify(merkleProof, merkleRoot, node),
"MerkleDistributor: Invalid proof."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= PremiumPackFeePreSale.mul(count),
"Aftmrkt::buyPresalePremiumPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.PREMIUM;
requestTouser[requestId] = _msgSender();
PremiumPack = PremiumPack - 1;
}
}
function buyPresaleFreshPack(uint256 count, bytes32[] calldata merkleProof) external payable {
bytes32 node = keccak256(abi.encodePacked(msg.sender));
require(!paused, "the contract is paused");
require(preSale, "Aftmrkt::preCheck: presale is not active");
require(
FreshPack >= count,
"Aftmrkt::buyFreshPack: FreshPacks are sold out."
);
require(
MerkleProof.verify(merkleProof, merkleRoot, node),
"MerkleDistributor: Invalid proof."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= FreshPackFeePreSale.mul(count),
"Aftmrkt::buyPresaleFreshPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.FRESH;
requestTouser[requestId] = _msgSender();
FreshPack = FreshPack - 1;
}
}
function buyPresaleStarterPack(uint256 count, bytes32[] calldata merkleProof) external payable {
bytes32 node = keccak256(abi.encodePacked(msg.sender));
require(!paused, "the contract is paused");
require(preSale, "Aftmrkt::preCheck: presale is not active");
require(
StarterPack >= count,
"Aftmrkt::buyFreshPack: FreshPacks are sold out."
);
require(
MerkleProof.verify(merkleProof, merkleRoot, node),
"MerkleDistributor: Invalid proof."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= StarterPackFeePreSale.mul(count),
"Aftmrkt::buyPresaleStarterPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.BASE;
requestTouser[requestId] = _msgSender();
StarterPack = StarterPack - 1;
}
}
function buyPremiumPack(uint256 count) external payable {
require(!paused, "the contract is paused");
require(mainSale, "Aftmrkt::preCheck: Sale is not active");
require(
PremiumPack >= count,
"Aftmrkt::buyPremiumPack: PremiumPacks are sold out."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= PremiumPackFee.mul(count),
"Aftmrkt::buyPremiumPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.PREMIUM;
requestTouser[requestId] = _msgSender();
PremiumPack = PremiumPack - 1;
}
}
function buyFreshPack(uint256 count) external payable {
require(!paused, "the contract is paused");
require(mainSale, "Aftmrkt::preCheck: Sale is not active");
require(
FreshPack >= count,
"Aftmrkt::buyFreshPack: FreshPacks are sold out."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= FreshPackFee.mul(count),
"Aftmrkt::buyFreshPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.FRESH;
requestTouser[requestId] = _msgSender();
FreshPack = FreshPack - 1;
}
}
function buyStarterPack(uint256 count) external payable {
require(!paused, "the contract is paused");
require(mainSale, "Aftmrkt::preCheck: Sale is not active");
require(
StarterPack >= count,
"Aftmrkt::buyFreshPack: FreshPacks are sold out."
);
require(
count <= minPerTxn,
"Exceeds max mint limit per tnx"
);
require(
LINK.balanceOf(address(this)) >= fee.mul(count),
"Not enough LINK - fill contract with faucet"
);
require(
msg.value >= StarterPackFee.mul(count),
"Aftmrkt::buyStarterPack: Insufficient amount."
);
for (uint256 i = 0; i < count; i++) {
bytes32 requestId = requestRandomness(keyHash, fee);
requestToPack[requestId] = Pack.BASE;
requestTouser[requestId] = _msgSender();
StarterPack = StarterPack - 1;
}
}
function fulfillRandomness(bytes32 requestId, uint256 randomness) internal override{
if (requestToPack[requestId] == Pack.PREMIUM)
{
givePremiumPack(randomness, requestId);
}
else if (requestToPack[requestId] == Pack.FRESH)
{
giveFreshPack(randomness, requestId);
}
else {
giveStarterPack(randomness, requestId);
}
}
function givePremiumPack(uint256 _randomNumner, bytes32 _requestId) internal{
giveEliteCard(_randomNumner.div(10**3), _requestId);
PPEliteCardLimit = PPEliteCardLimit - 1;
giveRareCard(_randomNumner.div(10**6), _requestId);
PPRareCardLimit = PPRareCardLimit - 1;
giveFreshCard(_randomNumner.div(10**9), _requestId);
PPFreshCardLimit = PPFreshCardLimit - 1;
giveCommonCard(_randomNumner.div(10**12), _requestId);
PPCommonCardLimit = PPCommonCardLimit - 1;
giveCommonCard(_randomNumner.div(10**15), _requestId);
PPCommonCardLimit = PPCommonCardLimit - 1;
}
function giveFreshPack(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 nfts = 3;
uint256 rareProb = FPRareCardLimit.mul(100).div(freshPackCards);
if (_randomNumner.div(10**3).mod(100) <= rareProb) {
giveRareCard(_randomNumner.div(10**6), _requestId);
nfts = nfts - 1;
freshPackCards = freshPackCards - 1;
FPRareCardLimit = FPRareCardLimit - 1;
}
uint256 commonProb = FPCommonCardLimit.mul(100).div(freshPackCards);
if (_randomNumner.div(10**9).mod(100) <= commonProb) {
giveCommonCard(_randomNumner.div(10**12), _requestId);
nfts = nfts - 1;
FPCommonCardLimit = FPCommonCardLimit - 1;
freshPackCards = freshPackCards - 1;
}
for (; nfts > 0; nfts = nfts - 1) {
giveFreshCard(_randomNumner.div(10**nfts * 5), _requestId);
freshPackCards = freshPackCards - 1;
FPFreshCardLimit = FPFreshCardLimit - 1;
}
}
function giveStarterPack(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 nfts = 2;
uint256 freshProb = SPFreshCardLimit.mul(100).div(basePackCards);
if (_randomNumner.div(10**9).mod(100) <= freshProb) {
giveFreshCard(_randomNumner.div(10**15), _requestId);
basePackCards = basePackCards - 1;
SPFreshCardLimit = SPFreshCardLimit - 1;
nfts = nfts - 1;
}
for (; nfts > 0; nfts = nfts - 1) {
giveCommonCard(_randomNumner.div(10**nfts*7), _requestId);
basePackCards = basePackCards - 1;
SPCommonCardLimit = SPCommonCardLimit - 1;
}
}
function giveEliteCard(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 edition = _randomNumner.mod(elite.length());
_mint(requestTouser[_requestId], elite.at(edition), 1, "");
supplyOf[elite.at(edition)] = supplyOf[elite.at(edition)] - 1;
if (supplyOf[elite.at(edition)] == 0) {
elite.remove(edition);
}
totalSupply[edition] = totalSupply[edition] + 1;
}
function giveRareCard(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 edition = _randomNumner.mod(rare.length());
_mint(requestTouser[_requestId], rare.at(edition), 1, "");
supplyOf[rare.at(edition)] = supplyOf[rare.at(edition)] - 1;
if (supplyOf[rare.at(edition)] == 0) {
rare.remove(edition);
}
totalSupply[edition] = totalSupply[edition] + 1;
}
function giveFreshCard(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 edition = _randomNumner.mod(fresh.length());
_mint(requestTouser[_requestId], fresh.at(edition), 1, "");
supplyOf[fresh.at(edition)] = supplyOf[fresh.at(edition)] - 1;
if (supplyOf[fresh.at(edition)] == 0) {
fresh.remove(edition);
}
totalSupply[edition] = totalSupply[edition] + 1;
}
function giveCommonCard(uint256 _randomNumner, bytes32 _requestId) internal {
uint256 edition = _randomNumner.mod(common.length());
_mint(requestTouser[_requestId], common.at(edition), 1, "");
supplyOf[common.at(edition)] = supplyOf[common.at(edition)] - 1;
if (supplyOf[common.at(edition)] == 0) {
common.remove(edition);
}
totalSupply[edition] = totalSupply[edition] + 1;
}
function mintReservedNFT(address beneficiary) external onlyOwner {
require(!paused, "the contract is paused");
require(!reservedMinted, "already Minted");
//Elite
_mint(beneficiary, 10, 1, "");
_mint(beneficiary, 12, 1, "");
_mint(beneficiary, 19, 1, "");
_mint(beneficiary, 23, 1, "");
_mint(beneficiary, 26, 1, "");
//Rare
_mint(beneficiary, 2, 1, "");
_mint(beneficiary, 8, 1, "");
_mint(beneficiary, 14, 1, "");
_mint(beneficiary, 21, 1, "");
_mint(beneficiary, 22, 1, "");
//Fresh
_mint(beneficiary, 1, 4, "");
_mint(beneficiary, 3, 4, "");
_mint(beneficiary, 6, 3, "");
_mint(beneficiary, 7, 4, "");
_mint(beneficiary, 16, 4, "");
_mint(beneficiary, 17, 3, "");
_mint(beneficiary, 24, 3, "");
//Fresh
_mint(beneficiary, 18, 1, "");
_mint(beneficiary, 27, 1, "");
reservedMinted = true;
}
function mintBreedingNFT() external onlyOwner {
require(!paused, "the contract is paused");
require(!breedingMinted, "already Minted");
_mint(msg.sender, 31, 10, "");
_mint(msg.sender, 32, 15, "");
_mint(msg.sender, 33, 20, "");
_mint(msg.sender, 34, 25, "");
_mint(msg.sender, 35, 25, "");
_mint(msg.sender, 36, 25, "");
_mint(msg.sender, 37, 25, "");
_mint(msg.sender, 38, 25, "");
_mint(msg.sender, 39, 25, "");
breedingMinted = true;
}
function updateMintPerTransectionLimit(uint256 newLimit) external onlyOwner {
minPerTxn = newLimit;
}
function setFee(uint256 newFee) public onlyOwner {
fee = newFee;
}
}
{
"compilationTarget": {
"Aftrmrkt.sol": "Aftrmrkt"
},
"evmVersion": "istanbul",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": true,
"runs": 200
},
"remappings": []
}
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"indexed":false,"internalType":"uint256[]","name":"values","type":"uint256[]"}],"name":"TransferBatch","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"id","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"TransferSingle","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"value","type":"string"},{"indexed":true,"internalType":"uint256","name":"id","type":"uint256"}],"name":"URI","type":"event"},{"inputs":[],"name":"FPCommonCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FPFreshCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FPRareCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FreshPack","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FreshPackFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FreshPackFeePreSale","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PPCommonCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PPEliteCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PPFreshCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PPRareCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PremiumPack","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PremiumPackFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PremiumPackFeePreSale","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SPCommonCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SPFreshCardLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"StarterPack","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"StarterPackFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"StarterPackFeePreSale","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"addressList","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"}],"name":"balanceOfBatch","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"basePackCards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"breedingMinted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"}],"name":"buyFreshPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"}],"name":"buyPremiumPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"buyPresaleFreshPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"buyPresalePremiumPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"buyPresaleStarterPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"count","type":"uint256"}],"name":"buyStarterPack","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"fee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"freshPackCards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getLinkBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getValues","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mainSale","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"merkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minPerTxn","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mintBreedingNFT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"beneficiary","type":"address"}],"name":"mintReservedNFT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"preSale","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"premiumPackCards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"randomResult","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"requestId","type":"bytes32"},{"internalType":"uint256","name":"randomness","type":"uint256"}],"name":"rawFulfillRandomness","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"reservedMinted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeBatchTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_baseURI","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newFee","type":"uint256"}],"name":"setFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_freshPackFee","type":"uint256"}],"name":"setFreshPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_freshPackFee","type":"uint256"}],"name":"setPreSaleFreshPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_premiumPackFee","type":"uint256"}],"name":"setPreSalePremiumPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_basePackFee","type":"uint256"}],"name":"setPreSaleStarterPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_status","type":"bool"}],"name":"setPreSaleStatus","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_premiumPackFee","type":"uint256"}],"name":"setPremiumPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_status","type":"bool"}],"name":"setSaleStatus","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_basePackFee","type":"uint256"}],"name":"setStarterPackFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"shareList","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"supplyLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"supplyOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"newRoot","type":"bytes32"}],"name":"updateMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newLimit","type":"uint256"}],"name":"updateMintPerTransectionLimit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"id","type":"uint256"}],"name":"uri","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdrawAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawLink","outputs":[],"stateMutability":"nonpayable","type":"function"}]