Dragon Academy Eggs

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;

//import "./interfaces/IERC20.sol";
import "./interfaces/IVerification.sol";
import "./interfaces/IMetadata.sol";
import "./interfaces/IERC721.sol";
import "./interfaces/IERC721TokenReceiver.sol";

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

using SafeERC20 for IERC20;

contract DragonEggs is IERC721{
    //Include all parameters in event so it serves as a db backup
    event Mint(address _minter, uint _firstId, uint _count, bool _isDragon, uint _nonce, uint _expiry, address _paymentToken, uint _paymentValue);

    address public vault;
    address public verification;

    uint public deployBlock;

    constructor( address _vault, address _verification, address _metadata ){
        supportsInterface[0x80ac58cd] = true; //ERC721
        supportsInterface[0x5b5e139f] = true; //ERC721Metadata
        supportsInterface[0x01ffc9a7] = true; //ERC165

        vault       = _vault;
        verification = _verification;
        metadata = _metadata;

        deployBlock = block.number;
    }

    mapping(address => uint) public nonce;
    mapping(uint => bool) isDragon; //For metadata

    function getChainId() public view returns(uint){
        return block.chainid;
    }
    function getSigner(address _to, uint _count, bool _isDragon, uint _nonce, uint _expiry, address _paymentToken, uint _paymentValue, bytes memory signature) public view returns (address){
        return IVerification(verification).getSigner(msg.sender, _count, _isDragon, _nonce, _expiry, _paymentToken, _paymentValue, signature);
    }


    function mint(uint _count, bool _isDragon, uint _nonce, uint _expiry, address _paymentToken, uint _paymentValue, uint _chainId, bytes memory signature) public payable{
        require(_nonce > nonce[msg.sender],"egg:nonce");
        require(_chainId == block.chainid,"egg:chainId");
        require(block.timestamp < _expiry,"egg:expiry");

        nonce[msg.sender] = _nonce;

        if(_paymentToken == address(0)){
            require(msg.value == _paymentValue,"egg:msg.value");
            (bool success, ) = payable(vault).call{value:msg.value}("");
            require(success, "egg:txETH");

        }else{
            require(msg.value == 0,"egg:msg.value");
             IERC20(_paymentToken).safeTransferFrom(msg.sender,vault,_paymentValue);
        }

        require(IVerification(verification).verify(msg.sender, _count, _isDragon, _nonce, _expiry, _paymentToken, _paymentValue, signature),"egg:signature");

        //Include all parameters in event so it serves as a db backup
        emit Mint(
            msg.sender,
            owners.length,
            _count,
            _isDragon,
            _nonce,
            _expiry,
            _paymentToken,
            _paymentValue
        );

        for(uint i = 0; i < _count; i++){
            _mint(msg.sender, _isDragon);
        }
    }


    //////===721 Implementation
    mapping(address => uint256) public balanceOf;
    mapping (uint256 => address) internal allowance;
    mapping (address => mapping (address => bool)) public isApprovedForAll;

    address[] owners;

    address public owner;

    //    METADATA VARS
    string constant public name = "Dragon Academy Eggs";
    string constant public symbol = "EGG";

    address private metadata;

    function _mint(address _to, bool _isDragon) private{

        balanceOf[_to]++;

        owners.push(_to);

        isDragon[owners.length] = _isDragon;

        emit Transfer(address(0),_to,owners.length);

    }

    function isValidToken(uint256 _tokenId) internal view returns(bool){
        if(_tokenId == 0 || _tokenId > owners.length) return false;
        return owners[_tokenId - 1] != address(0);
    }
    function ownerOf(uint256 _tokenId) public view returns(address){
        require(isValidToken(_tokenId),"invalid");
        return owners[_tokenId - 1];
    }

    function approve(address _approved, uint256 _tokenId)  external{
        address _owner = ownerOf(_tokenId);
        require( _owner == msg.sender                    //Require Sender Owns Token
            || isApprovedForAll[_owner][msg.sender]                //  or is approved for all.
        ,"permission");

        emit Approval(_owner, _approved, _tokenId);

        allowance[_tokenId] = _approved;
    }
    function getApproved(uint256 _tokenId) external view returns (address) {
        require(isValidToken(_tokenId),"invalid");
        return allowance[_tokenId];
    }

    function setApprovalForAll(address _operator, bool _approved) external {
        emit ApprovalForAll(msg.sender,_operator, _approved);
        isApprovedForAll[msg.sender][_operator] = _approved;
    }


    function transferFrom(address _from, address _to, uint256 _tokenId) public {

        //Check Transferable
        //There is a token validity check in ownerOf
        address _owner = ownerOf(_tokenId);

        require ( _owner == msg.sender             //Require sender owns token
        //Doing the two below manually instead of referring to the external methods saves gas
        || allowance[_tokenId] == msg.sender      //or is approved for this token
            || isApprovedForAll[_owner][msg.sender]          //or is approved for all
        ,"permission");

        require(_owner == _from,"owner");
        require(_to != address(0),"zero");

        emit Transfer(_from, _to, _tokenId);

        owners[_tokenId - 1] = _to;

        balanceOf[_from]--;
        balanceOf[_to]++;

        //Reset approved if there is one
        if(allowance[_tokenId] != address(0)){
            delete allowance[_tokenId];
        }
    }

    function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes memory data) public {
        transferFrom(_from, _to, _tokenId);

        //Get size of "_to" address, if 0 it's a wallet
        uint32 size;
        assembly {
            size := extcodesize(_to)
        }
        if(size > 0){
            IERC721TokenReceiver receiver = IERC721TokenReceiver(_to);
            require(receiver.onERC721Received(msg.sender,_from,_tokenId,data) == bytes4(keccak256("onERC721Received(address,address,uint256,bytes)")),"receiver");
        }
    }
    function safeTransferFrom(address _from, address _to, uint256 _tokenId) external {
        safeTransferFrom(_from,_to,_tokenId,"");
    }


    function tokenURI(uint256 _tokenId) public view returns (string memory){
        require(isValidToken(_tokenId),'invalid');



        return IMetadata(metadata).tokenURI(_tokenId, isDragon[_tokenId]);
    }


    function totalSupply() public view returns (uint256){
        return owners.length;
    }


    ///////===165 Implementation
    mapping (bytes4 => bool) public supportsInterface;
    ///==End 165

    function setMetadata(address _metadata) public{
        require(msg.sender == owner,"owner");
        metadata = _metadata;
    }

    function setOwner(address _owner) public{
        require(msg.sender == owner,"sender");
        owner = _owner;
    }

    function setVault(address _vault) public{
        require(msg.sender == vault, "sender");
        vault = _vault;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

/// @title ERC-721 Non-Fungible Token Standard
/// @dev See https://eips.ethereum.org/EIPS/eip-721
///  Note: the ERC-165 identifier for this interface is 0x80ac58cd.
interface IERC721 /* is ERC165 */ {
    /// @dev This emits when ownership of any NFT changes by any mechanism.
    ///  This event emits when NFTs are created (`from` == 0) and destroyed
    ///  (`to` == 0). Exception: during contract creation, any number of NFTs
    ///  may be created and assigned without emitting Transfer. At the time of
    ///  any transfer, the approved address for that NFT (if any) is reset to none.
    event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);

    /// @dev This emits when the approved address for an NFT is changed or
    ///  reaffirmed. The zero address indicates there is no approved address.
    ///  When a Transfer event emits, this also indicates that the approved
    ///  address for that NFT (if any) is reset to none.
    event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);

    /// @dev This emits when an operator is enabled or disabled for an owner.
    ///  The operator can manage all NFTs of the owner.
    event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);

    /// @notice Count all NFTs assigned to an owner
    /// @dev NFTs assigned to the zero address are considered invalid, and this
    ///  function throws for queries about the zero address.
    /// @param _owner An address for whom to query the balance
    /// @return The number of NFTs owned by `_owner`, possibly zero
    function balanceOf(address _owner) external view returns (uint256);

    /// @notice Find the owner of an NFT
    /// @dev NFTs assigned to zero address are considered invalid, and queries
    ///  about them do throw.
    /// @param _tokenId The identifier for an NFT
    /// @return The address of the owner of the NFT
    function ownerOf(uint256 _tokenId) external view returns (address);

    /// @notice Transfers the ownership of an NFT from one address to another address
    /// @dev Throws unless `msg.sender` is the current owner, an authorized
    ///  operator, or the approved address for this NFT. Throws if `_from` is
    ///  not the current owner. Throws if `_to` is the zero address. Throws if
    ///  `_tokenId` is not a valid NFT. When transfer is complete, this function
    ///  checks if `_to` is a smart contract (code size > 0). If so, it calls
    ///  `onERC721Received` on `_to` and throws if the return value is not
    ///  `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
    /// @param _from The current owner of the NFT
    /// @param _to The new owner
    /// @param _tokenId The NFT to transfer
    /// @param data Additional data with no specified format, sent in call to `_to`
    function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes calldata data) external;

    /// @notice Transfers the ownership of an NFT from one address to another address
    /// @dev This works identically to the other function with an extra data parameter,
    ///  except this function just sets data to "".
    /// @param _from The current owner of the NFT
    /// @param _to The new owner
    /// @param _tokenId The NFT to transfer
    function safeTransferFrom(address _from, address _to, uint256 _tokenId) external;

    /// @notice Transfer ownership of an NFT -- THE CALLER IS RESPONSIBLE
    ///  TO CONFIRM THAT `_to` IS CAPABLE OF RECEIVING NFTS OR ELSE
    ///  THEY MAY BE PERMANENTLY LOST
    /// @dev Throws unless `msg.sender` is the current owner, an authorized
    ///  operator, or the approved address for this NFT. Throws if `_from` is
    ///  not the current owner. Throws if `_to` is the zero address. Throws if
    ///  `_tokenId` is not a valid NFT.
    /// @param _from The current owner of the NFT
    /// @param _to The new owner
    /// @param _tokenId The NFT to transfer
    function transferFrom(address _from, address _to, uint256 _tokenId) external;

    /// @notice Change or reaffirm the approved address for an NFT
    /// @dev The zero address indicates there is no approved address.
    ///  Throws unless `msg.sender` is the current NFT owner, or an authorized
    ///  operator of the current owner.
    /// @param _approved The new approved NFT controller
    /// @param _tokenId The NFT to approve
    function approve(address _approved, uint256 _tokenId) external;

    /// @notice Enable or disable approval for a third party ("operator") to manage
    ///  all of `msg.sender`'s assets
    /// @dev Emits the ApprovalForAll event. The contract MUST allow
    ///  multiple operators per owner.
    /// @param _operator Address to add to the set of authorized operators
    /// @param _approved True if the operator is approved, false to revoke approval
    function setApprovalForAll(address _operator, bool _approved) external;

    /// @notice Get the approved address for a single NFT
    /// @dev Throws if `_tokenId` is not a valid NFT.
    /// @param _tokenId The NFT to find the approved address for
    /// @return The approved address for this NFT, or the zero address if there is none
    function getApproved(uint256 _tokenId) external view returns (address);

    /// @notice Query if an address is an authorized operator for another address
    /// @param _owner The address that owns the NFTs
    /// @param _operator The address that acts on behalf of the owner
    /// @return True if `_operator` is an approved operator for `_owner`, false otherwise
    function isApprovedForAll(address _owner, address _operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

/// @dev Note: the ERC-165 identifier for this interface is 0x150b7a02.
interface IERC721TokenReceiver {
    /// @notice Handle the receipt of an NFT
    /// @dev The ERC721 smart contract calls this function on the recipient
    ///  after a `transfer`. This function MAY throw to revert and reject the
    ///  transfer. Return of other than the magic value MUST result in the
    ///  transaction being reverted.
    ///  Note: the contract address is always the message sender.
    /// @param _operator The address which called `safeTransferFrom` function
    /// @param _from The address which previously owned the token
    /// @param _tokenId The NFT identifier which is being transferred
    /// @param _data Additional data with no specified format
    /// @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    ///  unless throwing
    function onERC721Received(address _operator, address _from, uint256 _tokenId, bytes calldata _data) external returns(bytes4);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;

interface IMetadata{
    function tokenURI(uint256 _tokenId, bool _isDragon) external view returns (string memory);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;

interface IVerification{
    function getSigner(address _to, uint _count, bool _isDragon, uint _nonce, uint _expiry, address _paymentToken, uint _paymentValue, bytes memory signature) external view returns (address);
    function verify(address _to, uint _count, bool _isDragon, uint _nonce, uint _expiry, address _paymentToken, uint _paymentValue, bytes memory signature) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

{
  "compilationTarget": {
    "contracts/DragonEggs.sol": "DragonEggs"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}