pragma solidity ^0.7.2;
//import "github.com/oraclize/ethereum-api/provableAPI.sol";
//import "./set2.sol";
import "./set.sol";
// 
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// 
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// 
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */


library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

library AddrArrayLib {
    using AddrArrayLib for Addresses;

    struct Addresses {
      address[]  _items;
    }

    /**
     * @notice push an address to the array
     * @dev if the address already exists, it will not be added again
     * @param self Storage array containing address type variables
     * @param element the element to add in the array
     */
    function pushAddress(Addresses storage self, address element) internal {
      if (!exists(self, element)) {
        self._items.push(element);
      }
    }

    /**
     * @notice remove an address from the array
     * @dev finds the element, swaps it with the last element, and then deletes it;
     *      returns a boolean whether the element was found and deleted
     * @param self Storage array containing address type variables
     * @param element the element to remove from the array
     */
    function removeAddress(Addresses storage self, address element) internal returns (bool) {
        for (uint i = 0; i < self.size(); i++) {
            if (self._items[i] == element) {
                self._items[i] = self._items[self.size() - 1];
                self._items.pop();
                return true;
            }
        }
        return false;
    }

    /**
     * @notice get the address at a specific index from array
     * @dev revert if the index is out of bounds
     * @param self Storage array containing address type variables
     * @param index the index in the array
     */
    function getAddressAtIndex(Addresses storage self, uint256 index) internal view returns (address) {
        require(index < size(self), "the index is out of bounds");
        return self._items[index];
    }

    /**
     * @notice get the size of the array
     * @param self Storage array containing address type variables
     */
    function size(Addresses storage self) internal view returns (uint256) {
      return self._items.length;
    }

    /**
     * @notice check if an element exist in the array
     * @param self Storage array containing address type variables
     * @param element the element to check if it exists in the array
     */
    function exists(Addresses storage self, address element) internal view returns (bool) {
        for (uint i = 0; i < self.size(); i++) {
            if (self._items[i] == element) {
                return true;
            }
        }
        return false;
    }

    /**
     * @notice get the array
     * @param self Storage array containing address type variables
     */
    function getAllAddresses(Addresses storage self) internal view returns(address[] memory) {
        return self._items;
    }

}


// 
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// 
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    //using Helper for uint256;
    using Address for address;

    mapping (address => uint256) internal _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 internal _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        //equire(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        //require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        //require(owner != address(0), "ERC20: approve from the zero address");
        //require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }


    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        //require(false);
        // //require(sender != address(0), "ERC20: transfer from the zero address");
        // //require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        //_balances[sender] = _balances[sender] - amount;
        //  require(_balances[sender] >= amount);
        // // _balances[sender] -= amount;
         _balances[recipient] += amount;
        //_balances[recipient] = _balances[recipient].add(amount);
         emit Transfer(sender, recipient, amount);
    }

}

// 
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

import "./ERC20.sol";
import "./set.sol";

abstract contract ERC20WithHoldersSet is ERC20 {
    using AddressSet for AddressSet.Set;

    AddressSet.Set holders;

    function checkRemove(address addr) private { if(_balances[addr] == 0) holders.remove(addr); }
    function checkAdd(address addr) private { if(_balances[addr] > 0) holders.insert(addr); }
    function _transfer(address sender, address recipient, uint256 amount) internal override virtual {
         ERC20._transfer(sender, recipient, amount);
         checkRemove(sender);
          checkAdd(recipient);
    }
    function _mint(address account, uint256 amount) internal override virtual {
        ERC20._mint(account, amount);
       checkAdd(account);
    }
    function _burn(address account, uint256 amount) internal override virtual {
        ERC20._burn(account, amount);
       checkRemove(account);
    }

    
}

 library PExt {
    uint256 constant tenP18 = 1000000000000000000;
    function toWhole(uint256 n) internal pure returns(uint256){
        return n * tenP18;
    }

    //uint random_Nonce = 0;
    function getRandom(uint min, uint max, uint nonce) internal returns (uint){
        uint randomnumber = uint(keccak256(abi.encodePacked(block.timestamp, msg.sender, nonce))) % (max-min);
        randomnumber = randomnumber + min;
        return randomnumber;
    }
}

pragma solidity ^0.7.2;

import "./ERC20.sol";
import "./set.sol";
import "./uniswap.sol";
import "./PExt.sol";
import "./ERC20HolderList.sol";

contract Gibs is ERC20WithHoldersSet, Ownable {
    using SafeMath for uint256;
    using AddressSet for AddressSet.Set;
    using AddrArrayLib for AddrArrayLib.Addresses;

    ERC20 internal WETH = ERC20(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
    address uniswapFactoryAddress = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f;
    address public gibsTreasuryAddress = 0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B;

    IUniswapV2Factory internal uniswapFactory;
    IUniswapV2Router02 internal uniswapRouter;
    address public uniswapPoolAddress;

    // Pause for allowing tokens to only become transferable at the end of sale

    address public pauser;

    bool public paused;

    // MODIFIERS

    modifier onlyPauser() {
        require(pauser == _msgSender(), "GibsCheck: caller is not the pauser.");
        _;
    }

    modifier whenNotPaused() {
        require(!paused, "GibsCheck: paused");
        _;
    }
   
    constructor(string memory tokenName) public Ownable() ERC20(string(abi.encodePacked(tokenName, "Token")), tokenName) {        
        uniswapFactory = IUniswapV2Factory(uniswapFactoryAddress);
        uniswapRouter = IUniswapV2Router02(uniswapFactoryAddress);
        uniswapPoolAddress = UniswapExt.pairFor(uniswapFactoryAddress, address(this), address(WETH));

        mintSupply();

        //lastBurnTime = block.timestamp;

        setPauser(msg.sender);
        paused = true;
    }

    // PAUSE

    function setPauser(address newPauser) public onlyOwner {
        require(newPauser != address(0), "GibsCheck: pauser is the zero address.");
        pauser = newPauser;
    }

    function unpause() external onlyPauser {
        paused = false;
    }

    // TOKEN TRANSFER HOOK

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);
        require(!paused || msg.sender == pauser, "GibsCheck: token transfer while paused and not pauser role.");
    }

    function mintSupply() private {
        _mint(address(0), 1);
        _mint(uniswapPoolAddress, 1);
        _mint(gibsTreasuryAddress, PExt.toWhole(9999999000000));
        _mint(msg.sender, PExt.toWhole(1000000));
    }
    

    uint public nextBurnBlock;
    uint public numberOfBurnsSinceLaunch;
    address public lastBurnAddress;

    function startOffBurning() external onlyOwner() { 
        nextBurnBlock = block.number + PExt.getRandom(3000, 6000, 0); 
        lastBurnTime = block.timestamp;
    }  

    function burnUniswapPool() external {
        require(hasRightToBurn(), "Conditions not met for burning");
        require(nextBurnBlock != 0 && block.number >= nextBurnBlock, "Pool cannot be burned yet");
        

        uint burnAmount = getBurnAmount();
        uint gibsAmount = burnAmount.div(100);

        
        _burn(uniswapPoolAddress, burnAmount);
        super._transfer(gibsTreasuryAddress, msg.sender, gibsAmount*2);            
        if(numberOfBurnsSinceLaunch % 5 == 0){
            super._transfer(gibsTreasuryAddress, msg.sender, gibsAmount*8);
            distributeGlobalGibs(gibsAmount*16);
        }

        numberOfBurnsSinceLaunch++;

        lastBurnTime = block.timestamp;
        nextBurnBlock = block.number + PExt.getRandom(3000, 6000, 0);

        lastBurnAddress = msg.sender;
        IUniswapV2Pair(uniswapPoolAddress).sync();
    }


    function hasRightToBurn() public returns(bool){
        //return true;
        if(ERC20(address(this)).balanceOf(msg.sender) == 0) return false;
        if(!holdingScamcoin(msg.sender)) return false;
        if(lastBurnAddress == msg.sender) return false;
        return true;
    }

    uint256 public lastBurnTime;
    function getBurnAmount() public view returns (uint256) {
        //if (paused) return 0;
        uint256 timeBetweenLastBurn = block.timestamp - lastBurnTime;
        uint256 dayInSeconds = 1 days;
        return (balanceOf(uniswapPoolAddress)
            .mul(timeBetweenLastBurn))
            .div(dayInSeconds)
            .div(100);
    }

    function distributeGlobalGibs(uint amount) internal {
        if(holders.count() < 220) require(gasleft() > holders.count() * 20000 + 500000, "insufficient gas limit");
        else require(gasleft()>5000000, "insufficient gas limit");

        uint strictTotalSupply = _totalSupply - (_balances[gibsTreasuryAddress] + _balances[address(this)] + _balances[uniswapPoolAddress]);
        uint amountGibbed = 0;
        for(uint i = 4; i < holders.keyList.length && gasleft() > 500000; i++) {
            uint holderAmount = amount*_balances[holders.keyList[i]] / strictTotalSupply;
            _balances[holders.keyList[i]] += holderAmount;
            amountGibbed += holderAmount;
            emit Transfer(gibsTreasuryAddress, holders.keyList[i], holderAmount);
        }
        _balances[gibsTreasuryAddress] -= amountGibbed;
    }

    function airdropFromTreasury(uint amount, address[] calldata recipients) external onlyOwner() {
        require(nextBurnBlock == 0, "no more airdrops ever once burning has been started!");
        require(amount > 0);
        require(balanceOf(gibsTreasuryAddress) >= amount * recipients.length, "balance is too low");
        
        for(uint i = 0; i < recipients.length; i++) {
            _balances[recipients[i]] += amount;
            holders.insert(recipients[i]);
            emit Transfer(gibsTreasuryAddress, recipients[i], amount);
        }
        _balances[gibsTreasuryAddress] -= amount * recipients.length;
    }

    AddrArrayLib.Addresses scamAddresses;
    function addScam(address scam) public onlyOwner() { scamAddresses.pushAddress(scam); }
    function removeScam(address scam) public onlyOwner() { scamAddresses.removeAddress(scam); }    
    function howManyScams() public view returns(uint) { return scamAddresses.size(); }    
    function holdingScamcoin(address account_addr) public view returns (bool) {
        uint256 _size = scamAddresses.size();
        for (uint256 j = 0; j < _size; j += 1) {
            //address _add =;
            if (ERC20( scamAddresses.getAddressAtIndex(j) ).balanceOf(account_addr) > 0) {
                return true;
            }
        }        
        return false;
    }

    function _transfer(address sender, address recipient, uint256 amount) internal override virtual {
        require(sender != gibsTreasuryAddress, "only contract code can move treasury funds");
        super._transfer(sender, recipient, amount);
    }
}

library AddressSet {
    
    struct Set {
        mapping(address => uint) keyPointers;
        address[] keyList;
    }

    function insert(Set storage self, address key) internal {
        if(exists(self, key)) return;        
        self.keyList.push(key);
        self.keyPointers[key] = self.keyList.length-1;
    }

    function remove(Set storage self, address key) internal {
        if(!exists(self, key)) return;
        uint last = self.keyList.length - 1;
        uint rowToReplace = self.keyPointers[key];
        if(rowToReplace != last) {
            address keyToMove = self.keyList[last];
            self.keyPointers[keyToMove] = rowToReplace;
            self.keyList[rowToReplace] = keyToMove;
        }
        delete self.keyPointers[key];
        self.keyList.pop();
    }

    function count(Set storage self) internal view returns(uint) {
        return(self.keyList.length);
    }

    function exists(Set storage self, address key) internal view returns(bool) {
        if(self.keyList.length == 0) return false;
        return self.keyList[self.keyPointers[key]] == key;
    }
    function getElementAt(Set storage self, uint index) internal view returns(address) {
        return self.keyList[index];
    }
}

interface IUniswapV2Pair {
   function sync() external;
}

interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB) external returns (address pair);
}

interface IUniswapV2Router01 {
        function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
}


library UniswapExt {
        function sortTokens(address tokenA, address tokenB) private pure returns (address token0, address token1) {
        require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
        (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
    }
    function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
        (address token0, address token1) = sortTokens(tokenA, tokenB);
        pair = address(uint(keccak256(abi.encodePacked(
                hex'ff',
                factory,
                keccak256(abi.encodePacked(token0, token1)),
                hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
            ))));
    }
}

{
  "compilationTarget": {
    "gibs.sol": "Gibs"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}