PLASMA

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

pragma solidity ^0.8.0;

interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);
}

interface IUniswapV2Pair {
    function sync() external;
}

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;
}

pragma solidity ^0.8.0;

contract MrFusion {
    constructor() {}
}

contract Reactor {
    using SafeMath for uint256;

    IUniswapV2Router02 public immutable _uniswapV2Router;
    PLASMA private _tokenContract;

    constructor(PLASMA tokenContract, IUniswapV2Router02 uniswapV2Router) {
        _tokenContract = tokenContract;
        _uniswapV2Router = uniswapV2Router;
    }

    receive() external payable {}

    function rebalance() external returns (uint256 rebal) {
        swapEthForTokens(address(this).balance);
    }

    function swapEthForTokens(uint256 EthAmount) private {
        address[] memory uniswapPairPath = new address[](2);
        uniswapPairPath[0] = _uniswapV2Router.WETH();
        uniswapPairPath[1] = address(_tokenContract);

        _uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{
            value: EthAmount
        }(0, uniswapPairPath, address(this), block.timestamp);
    }
}

contract TimeCircuts {
    using SafeMath for uint256;
    IUniswapV2Router02 public immutable _uniswapV2Router;
    PLASMA private _tokenContract;

    constructor(PLASMA tokenContract, IUniswapV2Router02 uniswapV2Router) {
        _tokenContract = tokenContract;
        _uniswapV2Router = uniswapV2Router;
    }

    function swapTokens(address pairTokenAddress, uint256 tokenAmount)
        external
    {
        uint256 initialPairTokenBalance =
            IERC20(pairTokenAddress).balanceOf(address(this));
        swapTokensForTokens(pairTokenAddress, tokenAmount);
        uint256 newPairTokenBalance =
            IERC20(pairTokenAddress).balanceOf(address(this)).sub(
                initialPairTokenBalance
            );
        IERC20(pairTokenAddress).transfer(
            address(_tokenContract),
            newPairTokenBalance
        );
    }

    function swapTokensForTokens(address pairTokenAddress, uint256 tokenAmount)
        private
    {
        address[] memory path = new address[](2);
        path[0] = address(_tokenContract);
        path[1] = pairTokenAddress;

        _tokenContract.approve(address(_uniswapV2Router), tokenAmount);

        // make the swap
        _uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of pair token
            path,
            address(this),
            block.timestamp
        );
    }
}

contract PLASMA is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    IUniswapV2Router02 public immutable _uniswapV2Router;

    mapping(address => uint256) private _rOwned;
    mapping(address => uint256) private _tOwned;
    mapping(address => mapping(address => uint256)) private _allowances;

    mapping(address => bool) private _isExcluded;
    address[] private _excluded;
    address public _anomalieAddress;
    address public _mrFusion;
    uint256 public _initialMrFusionLockAmount;
    uint256 public _initialFluxAmount;
    address public _uniswapETHPool;
    address public _fluxCapacitor;
    address public _orbs;

    uint256 private constant MAX = ~uint256(0);
    uint256 private _tTotal = 6300000e18;
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 public _tFeeTotal;
    uint256 public _tBurnTotal;

    string private _name = "PLASMA";
    string private _symbol = "PLASMA";
    uint8 private _decimals = 18;

    uint256 public _feeDecimals = 1;
    uint256 public _taxFee;
    uint256 public _lockFee;
    uint256 public _maxTxAmount = 100000e18;
    uint256 public _minTokensBeforeSwap = 1000e18;
    uint256 public _minInterestForReward = 10e18;
    uint256 private _autoSwapCallerFee = 200e18;

    bool private inSwapAndLiquify;
    bool public swapAndLiquifyEnabled;
    bool public tradingEnabled;
    bool public clearenceCheckEnabled;

    address private currentPairTokenAddress;
    address private currentPoolAddress;

    uint256 private _liquidityRemoveFee = 2;
    uint256 private _fusionCallerFee = 5;
    uint256 private _minTokenForfusion = 1000e18;
    uint256 private _lastfusion;
    uint256 private _fusionInterval = 1 hours;

    uint256 private _fluxCapacitorFee = 10;
    uint256 private _powerFee = 5;

    event Loged(address indexed madScientist, uint256 amount);
    event Unloged(address indexed madScientist, uint256 amount);

    event FeeDecimalsUpdated(uint256 taxFeeDecimals);
    event TaxFeeUpdated(uint256 taxFee);
    event LockFeeUpdated(uint256 lockFee);
    event MaxTxAmountUpdated(uint256 maxTxAmount);
    event WhitelistUpdated(address indexed pairTokenAddress);
    event TradingEnabled();
    event ClearenceCheckEnabledUpdated(bool enabled);
    event SwapAndLiquifyEnabledUpdated(bool enabled);
    event SwapAndLiquify(
        address indexed pairTokenAddress,
        uint256 tokensSwapped,
        uint256 pairTokenReceived,
        uint256 tokensIntoLiqudity
    );
    event Rebalance(uint256 tokenBurnt);
    event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
    event AutoSwapCallerFeeUpdated(uint256 autoSwapCallerFee);
    event MinInterestForRewardUpdated(uint256 minInterestForReward);
    event LiquidityRemoveFeeUpdated(uint256 liquidityRemoveFee);
    event fusionCallerFeeUpdated(uint256 rebalnaceCallerFee);
    event MinTokenForfusionUpdated(uint256 minRebalanceAmount);
    event fusionIntervalUpdated(uint256 rebalanceInterval);

    event AnomaliesAddressUpdated(address anomalies);
    event PowerFeeUpdated(uint256 powerFee);

    event fluxCapacitorUpdated(address fluxCapacitor);
    event fluxCapacitorFeeUpdated(uint256 fluxCapacitorFee);

    event orbsUpdated(address orbs);

    modifier lockTheSwap {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }
    Reactor public reactor;
    TimeCircuts public timeCircuts;

    constructor(
        IUniswapV2Router02 uniswapV2Router,
        uint256 initialMrFusionLockAmount
    ) {
        _lastfusion = block.timestamp;

        _uniswapV2Router = uniswapV2Router;
        _mrFusion = address(new MrFusion());
        _initialMrFusionLockAmount = initialMrFusionLockAmount;

        reactor = new Reactor(this, uniswapV2Router);
        timeCircuts = new TimeCircuts(this, uniswapV2Router);

        currentPoolAddress = IUniswapV2Factory(uniswapV2Router.factory())
            .createPair(address(this), uniswapV2Router.WETH());
        currentPairTokenAddress = uniswapV2Router.WETH();
        _uniswapETHPool = currentPoolAddress;

        updateSwapAndLiquifyEnabled(false);

        _rOwned[_msgSender()] = reflectionFromToken(
            _tTotal.sub(_initialMrFusionLockAmount),
            false
        );

        _rOwned[_mrFusion] = reflectionFromToken(
            _initialMrFusionLockAmount,
            false
        );

        emit Transfer(
            address(0),
            _msgSender(),
            _tTotal.sub(_initialMrFusionLockAmount)
        );

        emit Transfer(address(0), _mrFusion, _initialMrFusionLockAmount);
    }

    function name() public view returns (string memory) {
        return _name;
    }

    function symbol() public view returns (string memory) {
        return _symbol;
    }

    function decimals() public view returns (uint8) {
        return _decimals;
    }

    function totalSupply() public view override returns (uint256) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint256) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint256 amount)
        public
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender)
        public
        view
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount)
        public
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    function isExcluded(address account) public view returns (bool) {
        return _isExcluded[account];
    }

    function reflect(uint256 tAmount) public {
        address sender = _msgSender();
        require(
            !_isExcluded[sender],
            "PLASMA: Excluded addresses cannot call this function"
        );
        (uint256 rAmount, , , , , ) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rTotal = _rTotal.sub(rAmount);
        _tFeeTotal = _tFeeTotal.add(tAmount);
    }

    function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
        public
        view
        returns (uint256)
    {
        require(tAmount <= _tTotal, "Amount must be less than supply");
        if (!deductTransferFee) {
            (uint256 rAmount, , , , , ) = _getValues(tAmount);
            return rAmount;
        } else {
            (, uint256 rTransferAmount, , , , ) = _getValues(tAmount);
            return rTransferAmount;
        }
    }

    function tokenFromReflection(uint256 rAmount)
        public
        view
        returns (uint256)
    {
        require(
            rAmount <= _rTotal,
            "PLASMA: Amount must be less than total reflections"
        );
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }

    function excludeAccount(address account) external onlyOwner() {
        require(
            account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D,
            "PLASMA: We can not exclude Uniswap router."
        );
        require(
            account != address(this),
            "PLASMA: We can not exclude contract self."
        );
        require(
            account != _mrFusion,
            "PLASMA: We can not exclude reweard wallet."
        );
        require(!_isExcluded[account], "PLASMA: Account is already excluded");

        if (_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
    }

    function includeAccount(address account) external onlyOwner() {
        require(_isExcluded[account], "PLASMA: Account is already included");
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
    }

    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) private {
        require(owner != address(0), "PLASMA: approve from the zero address");
        require(spender != address(0), "PLASMA: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) private {
        require(sender != address(0), "PLASMA: transfer from the zero address");
        require(
            recipient != address(0),
            "PLASMA: transfer to the zero address"
        );
        require(
            amount > 0,
            "PLASMA: Transfer amount must be greater than zero"
        );

        if (sender != owner() && recipient != owner() && !inSwapAndLiquify) {
            require(
                amount <= _maxTxAmount,
                "PLASMA: Transfer amount exceeds the maxTxAmount."
            );
            if (
                (_msgSender() == currentPoolAddress ||
                    _msgSender() == address(_uniswapV2Router)) &&
                !tradingEnabled
            ) require(false, "PLASMA: trading is disabled.");
        }

        if (!inSwapAndLiquify) {
            uint256 lockedBalanceForPool = balanceOf(address(this));
            bool overMinTokenBalance =
                lockedBalanceForPool >= _minTokensBeforeSwap;
            if (
                overMinTokenBalance &&
                msg.sender != currentPoolAddress &&
                swapAndLiquifyEnabled
            ) {
                if (currentPairTokenAddress == _uniswapV2Router.WETH())
                    swapAndLiquifyForEth(lockedBalanceForPool);
                else
                    swapAndLiquifyForTokens(
                        currentPairTokenAddress,
                        lockedBalanceForPool
                    );
            }
        }

        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferStandard(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(sender, recipient, amount);
        } else {
            _transferStandard(sender, recipient, amount);
        }
    }

    receive() external payable {}

    function swapAndLiquifyForEth(uint256 lockedBalanceForPool)
        private
        lockTheSwap
    {
        // split the contract balance except swapCallerFee into halves
        uint256 lockedForSwap = lockedBalanceForPool.sub(_autoSwapCallerFee);
        uint256 half = lockedForSwap.div(2);
        uint256 otherHalf = lockedForSwap.sub(half);

        // capture the contract's current ETH balance.
        // this is so that we can capture exactly the amount of ETH that the
        // swap creates, and not make the liquidity event include any ETH that
        // has been manually sent to the contract
        uint256 initialBalance = address(this).balance;

        // swap tokens for ETH
        swapTokensForEth(half);

        // how much ETH did we just swap into?
        uint256 newBalance = address(this).balance.sub(initialBalance);

        // add liquidity to uniswap
        addLiquidityForEth(otherHalf, newBalance);

        emit SwapAndLiquify(
            _uniswapV2Router.WETH(),
            half,
            newBalance,
            otherHalf
        );

        _transfer(address(this), tx.origin, _autoSwapCallerFee);

        _sendRewardInterestToPool();
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = _uniswapV2Router.WETH();

        _approve(address(this), address(_uniswapV2Router), tokenAmount);

        // make the swap
        _uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    function addLiquidityForEth(uint256 tokenAmount, uint256 ethAmount)
        private
    {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(_uniswapV2Router), tokenAmount);

        // add the liquidity
        _uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(this),
            block.timestamp
        );
    }

    function swapAndLiquifyForTokens(
        address pairTokenAddress,
        uint256 lockedBalanceForPool
    ) private lockTheSwap {
        // split the contract balance except swapCallerFee into halves
        uint256 lockedForSwap = lockedBalanceForPool.sub(_autoSwapCallerFee);
        uint256 half = lockedForSwap.div(2);
        uint256 otherHalf = lockedForSwap.sub(half);

        _transfer(address(this), address(timeCircuts), half);

        uint256 initialPairTokenBalance =
            IERC20(pairTokenAddress).balanceOf(address(this));

        // swap tokens for pairToken
        timeCircuts.swapTokens(pairTokenAddress, half);

        uint256 newPairTokenBalance =
            IERC20(pairTokenAddress).balanceOf(address(this)).sub(
                initialPairTokenBalance
            );

        // add liquidity to uniswap
        addLiquidityForTokens(pairTokenAddress, otherHalf, newPairTokenBalance);

        emit SwapAndLiquify(
            pairTokenAddress,
            half,
            newPairTokenBalance,
            otherHalf
        );

        _transfer(address(this), tx.origin, _autoSwapCallerFee);

        _sendRewardInterestToPool();
    }

    function addLiquidityForTokens(
        address pairTokenAddress,
        uint256 tokenAmount,
        uint256 pairTokenAmount
    ) private {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(_uniswapV2Router), tokenAmount);
        IERC20(pairTokenAddress).approve(
            address(_uniswapV2Router),
            pairTokenAmount
        );

        // add the liquidity
        _uniswapV2Router.addLiquidity(
            address(this),
            pairTokenAddress,
            tokenAmount,
            pairTokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(this),
            block.timestamp
        );
    }

    function fusion() public lockTheSwap {
        if (clearenceCheckEnabled == true) {
            require(
                IERC1155(_orbs).balanceOf(msg.sender, 3) >= 1,
                "PLASMA: one much be holding the PLASMA orb to yeild such power"
            );

            require(
                block.timestamp > _lastfusion + _fusionInterval,
                "PLASMA: Too Soon."
            );

            fusionPartTwo();
        } else if (clearenceCheckEnabled == false) {
            require(
                balanceOf(_msgSender()) >= _minTokenForfusion,
                "PLASMA: Access denied, need more PLASMA to fusion "
            );
            require(
                block.timestamp > _lastfusion + _fusionInterval,
                "PLASMA: Too Soon."
            );

            fusionPartTwo();
        }
    }

    function fusionPartTwo() public lockTheSwap {
        _lastfusion = block.timestamp;

        uint256 amountToRemove =
            IERC20(_uniswapETHPool)
                .balanceOf(address(this))
                .mul(_liquidityRemoveFee)
                .div(100);

        removeLiquidityETH(amountToRemove);

        reactor.rebalance();

        uint256 tNewTokenBalance = balanceOf(address(reactor));
        uint256 tRewardForCaller =
            tNewTokenBalance.mul(_fusionCallerFee).div(100);
        uint256 tRemaining = tNewTokenBalance.sub(tRewardForCaller);

        uint256 toAnomalie = tRemaining.mul(_powerFee).div(100);

        addAnomalie(toAnomalie);

        uint256 aftPower = tRemaining.sub(toAnomalie);

        uint256 flux = aftPower.mul(_fluxCapacitorFee).div(100);

        addFlux(flux);

        uint256 tBurn = aftPower.sub(flux);
        uint256 currentRate = _getRate();
        uint256 rBurn = tBurn.mul(currentRate);

        _rOwned[_msgSender()] = _rOwned[_msgSender()].add(
            tRewardForCaller.mul(currentRate)
        );

        _rOwned[address(reactor)] = 0;

        _tBurnTotal = _tBurnTotal.add(tBurn);
        _tTotal = _tTotal.sub(tBurn);
        _rTotal = _rTotal.sub(rBurn);

        emit Transfer(address(reactor), address(_anomalieAddress), toAnomalie);
        emit Transfer(address(reactor), _msgSender(), tRewardForCaller);
        emit Transfer(address(reactor), address(0), tBurn);
        emit Rebalance(tBurn);
    }

    function addFlux(uint256 flux) private {
        uint256 currentRate = _getRate();

        _rOwned[_fluxCapacitor] = _rOwned[_fluxCapacitor].add(
            flux.mul(currentRate)
        );

        emit Transfer(address(reactor), _fluxCapacitor, flux);
    }

    function addAnomalie(uint256 toAnomalie) private {
        uint256 currentRate = _getRate();

        _rOwned[_anomalieAddress] = _rOwned[_anomalieAddress].add(
            toAnomalie.mul(currentRate)
        );

        emit Transfer(address(reactor), _anomalieAddress, toAnomalie);
    }

    function removeLiquidityETH(uint256 lpAmount)
        private
        returns (uint256 ETHAmount)
    {
        IERC20(_uniswapETHPool).approve(address(_uniswapV2Router), lpAmount);
        (ETHAmount) = _uniswapV2Router
            .removeLiquidityETHSupportingFeeOnTransferTokens(
            address(this),
            lpAmount,
            0,
            0,
            address(reactor),
            block.timestamp
        );
    }

    function _sendRewardInterestToPool() private {
        uint256 tRewardInterest =
            balanceOf(_mrFusion).sub(_initialMrFusionLockAmount);
        if (tRewardInterest > _minInterestForReward) {
            uint256 rRewardInterest =
                reflectionFromToken(tRewardInterest, false);
            _rOwned[currentPoolAddress] = _rOwned[currentPoolAddress].add(
                rRewardInterest
            );
            _rOwned[_mrFusion] = _rOwned[_mrFusion].sub(rRewardInterest);
            emit Transfer(_mrFusion, currentPoolAddress, tRewardInterest);
            IUniswapV2Pair(currentPoolAddress).sync();
        }
    }

    function _transferStandard(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        uint256 currentRate = _getRate();
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            uint256 rFee,
            uint256 tTransferAmount,
            uint256 tFee,
            uint256 tLock
        ) = _getValues(tAmount);
        uint256 rLock = tLock.mul(currentRate);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        if (inSwapAndLiquify) {
            _rOwned[recipient] = _rOwned[recipient].add(rAmount);
            emit Transfer(sender, recipient, tAmount);
        } else {
            _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
            _rOwned[address(this)] = _rOwned[address(this)].add(rLock);
            _reflectFee(rFee, tFee);
            emit Transfer(sender, address(this), tLock);
            emit Transfer(sender, recipient, tTransferAmount);
        }
    }

    function _transferToExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        uint256 currentRate = _getRate();
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            uint256 rFee,
            uint256 tTransferAmount,
            uint256 tFee,
            uint256 tLock
        ) = _getValues(tAmount);
        uint256 rLock = tLock.mul(currentRate);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        if (inSwapAndLiquify) {
            _tOwned[recipient] = _tOwned[recipient].add(tAmount);
            _rOwned[recipient] = _rOwned[recipient].add(rAmount);
            emit Transfer(sender, recipient, tAmount);
        } else {
            _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
            _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
            _rOwned[address(this)] = _rOwned[address(this)].add(rLock);
            _reflectFee(rFee, tFee);
            emit Transfer(sender, address(this), tLock);
            emit Transfer(sender, recipient, tTransferAmount);
        }
    }

    function _transferFromExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        uint256 currentRate = _getRate();
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            uint256 rFee,
            uint256 tTransferAmount,
            uint256 tFee,
            uint256 tLock
        ) = _getValues(tAmount);
        uint256 rLock = tLock.mul(currentRate);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        if (inSwapAndLiquify) {
            _rOwned[recipient] = _rOwned[recipient].add(rAmount);
            emit Transfer(sender, recipient, tAmount);
        } else {
            _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
            _rOwned[address(this)] = _rOwned[address(this)].add(rLock);
            _reflectFee(rFee, tFee);
            emit Transfer(sender, address(this), tLock);
            emit Transfer(sender, recipient, tTransferAmount);
        }
    }

    function _transferBothExcluded(
        address sender,
        address recipient,
        uint256 tAmount
    ) private {
        uint256 currentRate = _getRate();
        (
            uint256 rAmount,
            uint256 rTransferAmount,
            uint256 rFee,
            uint256 tTransferAmount,
            uint256 tFee,
            uint256 tLock
        ) = _getValues(tAmount);
        uint256 rLock = tLock.mul(currentRate);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        if (inSwapAndLiquify) {
            _tOwned[recipient] = _tOwned[recipient].add(tAmount);
            _rOwned[recipient] = _rOwned[recipient].add(rAmount);
            emit Transfer(sender, recipient, tAmount);
        } else {
            _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
            _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
            _rOwned[address(this)] = _rOwned[address(this)].add(rLock);
            _reflectFee(rFee, tFee);
            emit Transfer(sender, address(this), tLock);
            emit Transfer(sender, recipient, tTransferAmount);
        }
    }

    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }

    function _getValues(uint256 tAmount)
        private
        view
        returns (
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLock) =
            _getTValues(tAmount, _taxFee, _lockFee, _feeDecimals);
        uint256 currentRate = _getRate();
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
            _getRValues(tAmount, tFee, tLock, currentRate);
        return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLock);
    }

    function _getTValues(
        uint256 tAmount,
        uint256 taxFee,
        uint256 lockFee,
        uint256 feeDecimals
    )
        private
        pure
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        uint256 tFee = tAmount.mul(taxFee).div(10**(feeDecimals + 2));
        uint256 tLockFee = tAmount.mul(lockFee).div(10**(feeDecimals + 2));
        uint256 tTransferAmount = tAmount.sub(tFee).sub(tLockFee);
        return (tTransferAmount, tFee, tLockFee);
    }

    function _getRValues(
        uint256 tAmount,
        uint256 tFee,
        uint256 tLock,
        uint256 currentRate
    )
        private
        pure
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rLock = tLock.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee).sub(rLock);
        return (rAmount, rTransferAmount, rFee);
    }

    function _getRate() public view returns (uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function calculateFee(
        uint256 _amount,
        uint256 _feeDeci,
        uint256 _percentage
    ) public pure returns (uint256 amount) {
        amount = _amount.mul(_percentage).div(10**(uint256(_feeDeci) + 2));
    }

    function _getCurrentSupply() public view returns (uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (
                _rOwned[_excluded[i]] > rSupply ||
                _tOwned[_excluded[i]] > tSupply
            ) return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

    function getCurrentPoolAddress() public view returns (address) {
        return currentPoolAddress;
    }

    function getCurrentPairTokenAddress() public view returns (address) {
        return currentPairTokenAddress;
    }

    function getLiquidityRemoveFee() public view returns (uint256) {
        return _liquidityRemoveFee;
    }

    function getfusionCallerFee() public view returns (uint256) {
        return _fusionCallerFee;
    }

    function getMinTokenForfusion() public view returns (uint256) {
        return _minTokenForfusion;
    }

    function getLastfusion() public view returns (uint256) {
        return _lastfusion;
    }

    function getfusionInterval() public view returns (uint256) {
        return _fusionInterval;
    }

    function getFluxCapacitorAddress() public view returns (address) {
        return _fluxCapacitor;
    }

    function _setFeeDecimals(uint256 feeDecimals) external onlyOwner() {
        require(
            feeDecimals >= 0 && feeDecimals <= 2,
            "PLASMA: fee decimals should be in 0 - 2"
        );
        _feeDecimals = feeDecimals;
        emit FeeDecimalsUpdated(feeDecimals);
    }

    function _setTaxFee(uint256 taxFee) external onlyOwner() {
        require(
            taxFee >= 0 && taxFee <= 10 * 10**_feeDecimals,
            "PLASMA: taxFee should be in 0 - 10"
        );
        _taxFee = taxFee;
        emit TaxFeeUpdated(taxFee);
    }

    function _setLockFee(uint256 lockFee) external onlyOwner() {
        require(
            lockFee >= 0 && lockFee <= 10 * 10**_feeDecimals,
            "PLASMA: lockFee should be in 0 - 10"
        );
        _lockFee = lockFee;
        emit LockFeeUpdated(lockFee);
    }

    function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
        require(
            maxTxAmount >= 50000e18,
            "PLASMA: maxTxAmount should be greater than 50000e18"
        );
        _maxTxAmount = maxTxAmount;
        emit MaxTxAmountUpdated(maxTxAmount);
    }

    function _setMinTokensBeforeSwap(uint256 minTokensBeforeSwap)
        external
        onlyOwner()
    {
        require(
            minTokensBeforeSwap >= 1e18 && minTokensBeforeSwap <= 25000e18,
            "PLASMA: minTokenBeforeSwap should be in 1e18 - 25000e18"
        );
        require(
            minTokensBeforeSwap > _autoSwapCallerFee,
            "PLASMA: minTokenBeforeSwap should be greater than autoSwapCallerFee"
        );
        _minTokensBeforeSwap = minTokensBeforeSwap;
        emit MinTokensBeforeSwapUpdated(minTokensBeforeSwap);
    }

    function _setAutoSwapCallerFee(uint256 autoSwapCallerFee)
        external
        onlyOwner()
    {
        require(
            autoSwapCallerFee >= 1e18,
            "PLASMA: autoSwapCallerFee should be greater than 1e18"
        );
        _autoSwapCallerFee = autoSwapCallerFee;
        emit AutoSwapCallerFeeUpdated(autoSwapCallerFee);
    }

    function _setMinInterestForReward(uint256 minInterestForReward)
        external
        onlyOwner()
    {
        _minInterestForReward = minInterestForReward;
        emit MinInterestForRewardUpdated(minInterestForReward);
    }

    function _setLiquidityRemoveFee(uint256 liquidityRemoveFee)
        external
        onlyOwner()
    {
        require(
            liquidityRemoveFee >= 1 && liquidityRemoveFee <= 10,
            "PLASMA: liquidityRemoveFee should be in 1 - 10"
        );
        _liquidityRemoveFee = liquidityRemoveFee;
        emit LiquidityRemoveFeeUpdated(liquidityRemoveFee);
    }

    function _setfusionCallerFee(uint256 fusionCallerFee) external onlyOwner() {
        require(
            fusionCallerFee >= 1 && fusionCallerFee <= 15,
            "PLASMA: fusionCallerFee should be in 1 - 15"
        );
        _fusionCallerFee = fusionCallerFee;
        emit fusionCallerFeeUpdated(fusionCallerFee);
    }

    function _setMinTokenForfusion(uint256 minTokenForfusion)
        external
        onlyOwner()
    {
        _minTokenForfusion = minTokenForfusion;
        emit MinTokenForfusionUpdated(minTokenForfusion);
    }

    function _setfusionInterval(uint256 fusionInterval) external onlyOwner() {
        _fusionInterval = fusionInterval;
        emit fusionIntervalUpdated(fusionInterval);
    }

    function _setfluxCapacitorAddress(address fluxCapacitor)
        external
        onlyOwner()
    {
        _fluxCapacitor = fluxCapacitor;
        emit fluxCapacitorUpdated(fluxCapacitor);
    }

    function _setOrbsAddress(address orbs) external onlyOwner() {
        _orbs = orbs;
        emit orbsUpdated(orbs);
    }

    function _setFluxCapacitorFee(uint256 fluxCapacitorFee)
        external
        onlyOwner()
    {
        _fluxCapacitorFee = fluxCapacitorFee;
        emit fluxCapacitorFeeUpdated(fluxCapacitorFee);
    }

    function _setPowerFee(uint256 powerFee) external onlyOwner() {
        _powerFee = powerFee;

        emit PowerFeeUpdated(powerFee);
    }

    function _setAnomalies(address payable anomalieAddress)
        external
        onlyOwner()
    {
        _anomalieAddress = anomalieAddress;

        emit AnomaliesAddressUpdated(anomalieAddress);
    }

    function updateSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }

    function _updateWhitelist(address poolAddress, address pairTokenAddress)
        public
        onlyOwner()
    {
        require(poolAddress != address(0), "PLASMA: Pool address is zero.");
        require(
            pairTokenAddress != address(0),
            "PLASMA: Pair token address is zero."
        );
        require(
            pairTokenAddress != address(this),
            "PLASMA: Pair token address self address."
        );
        require(
            pairTokenAddress != currentPairTokenAddress,
            "PLASMA: Pair token address is same as current one."
        );

        currentPoolAddress = poolAddress;
        currentPairTokenAddress = pairTokenAddress;

        emit WhitelistUpdated(pairTokenAddress);
    }

    function _enableTrading() external onlyOwner() {
        tradingEnabled = true;
        TradingEnabled();
    }

    function _enableClearenceCheck(bool _enabled) public onlyOwner {
        clearenceCheckEnabled = true;
        emit ClearenceCheckEnabledUpdated(_enabled);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "compilationTarget": {
    "Plasma.sol": "PLASMA"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": []
}