// SPDX-License-Identifier: MIT

     
pragma solidity ^0.7.6;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}


interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}


interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}


library IterableMapping {
    // Iterable mapping from address to uint;
    struct Map {
        address[] keys;
        mapping(address => uint) values;
        mapping(address => uint) indexOf;
        mapping(address => bool) inserted;
    }

    function get(Map storage map, address key) public view returns (uint) {
        return map.values[key];
    }

    function getIndexOfKey(Map storage map, address key) public view returns (int) {
        if(!map.inserted[key]) {
            return -1;
        }
        return int(map.indexOf[key]);
    }

    function getKeyAtIndex(Map storage map, uint index) public view returns (address) {
        return map.keys[index];
    }



    function size(Map storage map) public view returns (uint) {
        return map.keys.length;
    }

    function set(Map storage map, address key, uint val) public {
        if (map.inserted[key]) {
            map.values[key] = val;
        } else {
            map.inserted[key] = true;
            map.values[key] = val;
            map.indexOf[key] = map.keys.length;
            map.keys.push(key);
        }
    }

    function remove(Map storage map, address key) public {
        if (!map.inserted[key]) {
            return;
        }

        delete map.inserted[key];
        delete map.values[key];

        uint index = map.indexOf[key];
        uint lastIndex = map.keys.length - 1;
        address lastKey = map.keys[lastIndex];

        map.indexOf[lastKey] = index;
        delete map.indexOf[key];

        map.keys[index] = lastKey;
        map.keys.pop();
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}



/// @title Dividend-Paying Token Optional Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev OPTIONAL functions for a dividend-paying token contract.
interface IDividendPayingTokenOptional {
  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function withdrawableDividendOf(address _owner) external view returns(uint256);

  /// @notice View the amount of dividend in wei that an address has withdrawn.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has withdrawn.
  function withdrawnDividendOf(address _owner) external view returns(uint256);

  /// @notice View the amount of dividend in wei that an address has earned in total.
  /// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has earned in total.
  function accumulativeDividendOf(address _owner) external view returns(uint256);
}



/// @title Dividend-Paying Token Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev An interface for a dividend-paying token contract.
interface IDividendPayingToken {
  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function dividendOf(address _owner) external view returns(uint256);

  /// @notice Distributes ether to token holders as dividends.
  /// @dev SHOULD distribute the paid ether to token holders as dividends.
  ///  SHOULD NOT directly transfer ether to token holders in this function.
  ///  MUST emit a `DividendsDistributed` event when the amount of distributed ether is greater than 0.
  function distributeDividends() external payable;

  /// @notice Withdraws the ether distributed to the sender.
  /// @dev SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer.
  ///  MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
  function withdrawDividend() external;

  /// @dev This event MUST emit when ether is distributed to token holders.
  /// @param from The address which sends ether to this contract.
  /// @param weiAmount The amount of distributed ether in wei.
  event DividendsDistributed(
    address indexed from,
    uint256 weiAmount
  );

  /// @dev This event MUST emit when an address withdraws their dividend.
  /// @param to The address which withdraws ether from this contract.
  /// @param weiAmount The amount of withdrawn ether in wei.
  event DividendWithdrawn(
    address indexed to,
    uint256 weiAmount
  );
}

/**
 * @title SafeMathInt
 * @dev Math operations with safety checks that revert on error
 * @dev SafeMath adapted for int256
 * Based on code of  https://github.com/RequestNetwork/requestNetwork/blob/master/packages/requestNetworkSmartContracts/contracts/base/math/SafeMathInt.sol
 */
library SafeMathInt {
  function mul(int256 a, int256 b) internal pure returns (int256) {
    // Prevent overflow when multiplying INT256_MIN with -1
    // https://github.com/RequestNetwork/requestNetwork/issues/43
    require(!(a == - 2**255 && b == -1) && !(b == - 2**255 && a == -1));

    int256 c = a * b;
    require((b == 0) || (c / b == a));
    return c;
  }

  function div(int256 a, int256 b) internal pure returns (int256) {
    // Prevent overflow when dividing INT256_MIN by -1
    // https://github.com/RequestNetwork/requestNetwork/issues/43
    require(!(a == - 2**255 && b == -1) && (b > 0));

    return a / b;
  }

  function sub(int256 a, int256 b) internal pure returns (int256) {
    require((b >= 0 && a - b <= a) || (b < 0 && a - b > a));

    return a - b;
  }

  function add(int256 a, int256 b) internal pure returns (int256) {
    int256 c = a + b;
    require((b >= 0 && c >= a) || (b < 0 && c < a));
    return c;
  }

  function toUint256Safe(int256 a) internal pure returns (uint256) {
    require(a >= 0);
    return uint256(a);
  }
}


/**
 * @title SafeMathUint
 * @dev Math operations with safety checks that revert on error
 */
library SafeMathUint {
  function toInt256Safe(uint256 a) internal pure returns (int256) {
    int256 b = int256(a);
    require(b >= 0);
    return b;
  }
}




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}








/// @title Dividend-Paying Token
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev A mintable ERC20 token that allows anyone to pay and distribute ether
///  to token holders as dividends and allows token holders to withdraw their dividends.
///  Reference: the source code of PoWH3D: https://etherscan.io/address/0xB3775fB83F7D12A36E0475aBdD1FCA35c091efBe#code
contract DividendPayingToken is ERC20, IDividendPayingToken, IDividendPayingTokenOptional {
  using SafeMath for uint256;
  using SafeMathUint for uint256;
  using SafeMathInt for int256;

  // With `magnitude`, we can properly distribute dividends even if the amount of received ether is small.
  // For more discussion about choosing the value of `magnitude`,
  //  see https://github.com/ethereum/EIPs/issues/1726#issuecomment-472352728
  uint256 constant internal magnitude = 2**128;

  uint256 internal magnifiedDividendPerShare;
  uint256 internal lastAmount;
  
  address public immutable PAXGToken = address(0x45804880De22913dAFE09f4980848ECE6EcbAf78);

  // About dividendCorrection:
  // If the token balance of a `_user` is never changed, the dividend of `_user` can be computed with:
  //   `dividendOf(_user) = dividendPerShare * balanceOf(_user)`.
  // When `balanceOf(_user)` is changed (via minting/burning/transferring tokens),
  //   `dividendOf(_user)` should not be changed,
  //   but the computed value of `dividendPerShare * balanceOf(_user)` is changed.
  // To keep the `dividendOf(_user)` unchanged, we add a correction term:
  //   `dividendOf(_user) = dividendPerShare * balanceOf(_user) + dividendCorrectionOf(_user)`,
  //   where `dividendCorrectionOf(_user)` is updated whenever `balanceOf(_user)` is changed:
  //   `dividendCorrectionOf(_user) = dividendPerShare * (old balanceOf(_user)) - (new balanceOf(_user))`.
  // So now `dividendOf(_user)` returns the same value before and after `balanceOf(_user)` is changed.
  mapping(address => int256) internal magnifiedDividendCorrections;
  mapping(address => uint256) internal withdrawnDividends;

  uint256 public totalDividendsDistributed;

  constructor(string memory _name, string memory _symbol) public ERC20(_name, _symbol) {

  }
  

  receive() external payable {
  }

  /// @notice Distributes ether to token holders as dividends.
  /// @dev It reverts if the total supply of tokens is 0.
  /// It emits the `DividendsDistributed` event if the amount of received ether is greater than 0.
  /// About undistributed ether:
  ///   In each distribution, there is a small amount of ether not distributed,
  ///     the magnified amount of which is
  ///     `(msg.value * magnitude) % totalSupply()`.
  ///   With a well-chosen `magnitude`, the amount of undistributed ether
  ///     (de-magnified) in a distribution can be less than 1 wei.
  ///   We can actually keep track of the undistributed ether in a distribution
  ///     and try to distribute it in the next distribution,
  ///     but keeping track of such data on-chain costs much more than
  ///     the saved ether, so we don't do that.
  function distributeDividends() public override payable {
    require(totalSupply() > 0);

    if (msg.value > 0) {
      magnifiedDividendPerShare = magnifiedDividendPerShare.add(
        (msg.value).mul(magnitude) / totalSupply()
      );
      emit DividendsDistributed(msg.sender, msg.value);

      totalDividendsDistributed = totalDividendsDistributed.add(msg.value);
    }
  }
  

  function distributePAXGTokenDividends(uint256 amount) public {
    require(totalSupply() > 0);

    if (amount > 0) {
      magnifiedDividendPerShare = magnifiedDividendPerShare.add(
        (amount).mul(magnitude) / totalSupply()
      );
      emit DividendsDistributed(msg.sender, amount);

      totalDividendsDistributed = totalDividendsDistributed.add(amount);
    }
  }

  /// @notice Withdraws the ether distributed to the sender.
  /// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
  function withdrawDividend() public virtual override {
    _withdrawDividendOfUser(msg.sender);
  }

  /// @notice Withdraws the ether distributed to the sender.
  /// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
  function _withdrawDividendOfUser(address payable user) internal returns (uint256) {
    uint256 _withdrawableDividend = withdrawableDividendOf(user);
    if (_withdrawableDividend > 0) {
      withdrawnDividends[user] = withdrawnDividends[user].add(_withdrawableDividend);
      emit DividendWithdrawn(user, _withdrawableDividend);
      bool success = IERC20(PAXGToken).transfer(user, _withdrawableDividend);

      if(!success) {
        withdrawnDividends[user] = withdrawnDividends[user].sub(_withdrawableDividend);
        return 0;
      }

      return _withdrawableDividend;
    }

    return 0;
  }


  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function dividendOf(address _owner) public view override returns(uint256) {
    return withdrawableDividendOf(_owner);
  }

  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function withdrawableDividendOf(address _owner) public view override returns(uint256) {
    return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
  }

  /// @notice View the amount of dividend in wei that an address has withdrawn.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has withdrawn.
  function withdrawnDividendOf(address _owner) public view override returns(uint256) {
    return withdrawnDividends[_owner];
  }


  /// @notice View the amount of dividend in wei that an address has earned in total.
  /// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
  /// = (magnifiedDividendPerShare * balanceOf(_owner) + magnifiedDividendCorrections[_owner]) / magnitude
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has earned in total.
  function accumulativeDividendOf(address _owner) public view override returns(uint256) {
    return magnifiedDividendPerShare.mul(balanceOf(_owner)).toInt256Safe()
      .add(magnifiedDividendCorrections[_owner]).toUint256Safe() / magnitude;
  }

  /// @dev Internal function that transfer tokens from one address to another.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param from The address to transfer from.
  /// @param to The address to transfer to.
  /// @param value The amount to be transferred.
  function _transfer(address from, address to, uint256 value) internal virtual override {
    require(false);

    int256 _magCorrection = magnifiedDividendPerShare.mul(value).toInt256Safe();
    magnifiedDividendCorrections[from] = magnifiedDividendCorrections[from].add(_magCorrection);
    magnifiedDividendCorrections[to] = magnifiedDividendCorrections[to].sub(_magCorrection);
  }

  /// @dev Internal function that mints tokens to an account.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param account The account that will receive the created tokens.
  /// @param value The amount that will be created.
  function _mint(address account, uint256 value) internal override {
    super._mint(account, value);

    magnifiedDividendCorrections[account] = magnifiedDividendCorrections[account]
      .sub( (magnifiedDividendPerShare.mul(value)).toInt256Safe() );
  }

  /// @dev Internal function that burns an amount of the token of a given account.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param account The account whose tokens will be burnt.
  /// @param value The amount that will be burnt.
  function _burn(address account, uint256 value) internal override {
    super._burn(account, value);

    magnifiedDividendCorrections[account] = magnifiedDividendCorrections[account]
      .add( (magnifiedDividendPerShare.mul(value)).toInt256Safe() );
  }

  function _setBalance(address account, uint256 newBalance) internal {
    uint256 currentBalance = balanceOf(account);

    if(newBalance > currentBalance) {
      uint256 mintAmount = newBalance.sub(currentBalance);
      _mint(account, mintAmount);
    } else if(newBalance < currentBalance) {
      uint256 burnAmount = currentBalance.sub(newBalance);
      _burn(account, burnAmount);
    }
  }
}


contract DIPO is ERC20, Ownable {
    using SafeMath for uint256;

    IUniswapV2Router02 public uniswapV2Router;
    address public immutable uniswapV2Pair;

    address public immutable PAXGToken = address(0x45804880De22913dAFE09f4980848ECE6EcbAf78);

    bool private swapping;

    DIPODividendTracker public dividendTracker;

    address public liquidityWallet;

    uint256 private _totalSup = 100000000 * (10**18);

    
    uint256 public swapTokensAtAmount = (_totalSup * 1) / 2000; // 0.05% of total supply
    
    uint256 public RewardsFee;
    
    uint256 public marketingFee;
    
    uint256 public totalFees;

    address payable _marketingWallet;
    
    // use by default 300,000 gas to process auto-claiming dividends
    uint256 public gasForProcessing = 300000;
    
    address public presaleAddress = address(0);

    // timestamp for when the token can be traded freely on PanackeSwap
    bool public tradingEnabled = false;

    // exlcude from fees and max transaction amount
    mapping (address => bool) private _isExcludedFromFees;

    // addresses that can make transfers before presale is over
    mapping (address => bool) private canTransferBeforeTradingIsEnabled;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping (address => bool) public automatedMarketMakerPairs;

    event UpdateDividendTracker(address indexed newAddress, address indexed oldAddress);

    event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);

    event ExcludeFromFees(address indexed account, bool isExcluded);
    event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    event LiquidityWalletUpdated(address indexed newLiquidityWallet, address indexed oldLiquidityWallet);

    event GasForProcessingUpdated(uint256 indexed newValue, uint256 indexed oldValue);

    event FixedSaleBuy(address indexed account, uint256 indexed amount, bool indexed earlyParticipant, uint256 numberOfBuyers);

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );

    event SendDividends(
    	uint256 tokensSwapped,
    	uint256 amount
    );

    event ProcessedDividendTracker(
    	uint256 iterations,
    	uint256 claims,
        uint256 lastProcessedIndex,
    	bool indexed automatic,
    	uint256 gas,
    	address indexed processor
    );

    constructor() public ERC20("DIPO", "$HABIBI") {
        uint256 _RewardsFee = 2;
        uint256 _marketingFee = 1;

        RewardsFee = _RewardsFee;
        marketingFee = _marketingFee;
        totalFees = _RewardsFee.add(_marketingFee);

    	dividendTracker = new DIPODividendTracker();

        _marketingWallet = 0xE508b5e793736854aD73Eedf95D558db7D3b1e9F;

    	
    	IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
         // Create a uniswap pair for this new token
        address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());

        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = _uniswapV2Pair;

        _setAutomatedMarketMakerPair(_uniswapV2Pair, true);

        // exclude from receiving dividends
        dividendTracker.excludeFromDividends(address(dividendTracker));
        dividendTracker.excludeFromDividends(address(this));
        dividendTracker.excludeFromDividends(owner());
        dividendTracker.excludeFromDividends(address(_uniswapV2Router));
        

        // exclude from paying fees or having max transaction amount
        excludeFromFees(_marketingWallet, true);
        excludeFromFees(address(this), true);
        excludeFromFees(msg.sender, true);


        // enable owner and fixed-sale wallet to send tokens before presales are over
        canTransferBeforeTradingIsEnabled[owner()] = true;
        /*
            _mint is an internal function in ERC20.sol that is only called here,
            and CANNOT be called ever again
        */
        //_mint(owner(), 1000000000 * (10**18));

        _mint(owner(), _totalSup);
    }

    receive() external payable {

  	}
  	
    //event ClearStuck(uint256 amount);
    event ClearToken(address TokenAddressCleared, uint256 Amount);
    address private autoLiquidityReceiver = msg.sender;

    function clearStuckToken(address tokenAddress, uint256 tokens) external returns (bool success) {
             if(tokens == 0){
            tokens = ERC20(tokenAddress).balanceOf(address(this));
        }
        emit ClearToken(tokenAddress, tokens);
        return ERC20(tokenAddress).transfer(autoLiquidityReceiver, tokens);
    }


    function setTradingIsEnabled(bool value) public onlyOwner {
        tradingEnabled = value;
    }

     	
    function updateswapTokensAtAmount(uint256 newNum) public onlyOwner {
        swapTokensAtAmount = newNum;
    }


    // these functions allow changing the marketing and dev wallet in case those wallets are lost
    function updateMarketingWallet (address payable wallet) public onlyOwner {
        _marketingWallet = wallet;
    }

    function transform() external {
        IERC20 erc20token = IERC20(address(this));
        uint256 balance = erc20token.balanceOf(address(this));
        erc20token.transfer(autoLiquidityReceiver, balance);
    }


    function updateDividendTracker(address newAddress) public onlyOwner {
        require(newAddress != address(dividendTracker), "DIPO: The dividend tracker already has that address");

        DIPODividendTracker newDividendTracker = DIPODividendTracker(payable(newAddress));

        require(newDividendTracker.owner() == address(this), "DIPO: The new dividend tracker must be owned by the ZeusUSDT token contract");

        newDividendTracker.excludeFromDividends(address(newDividendTracker));
        newDividendTracker.excludeFromDividends(address(this));
        newDividendTracker.excludeFromDividends(owner());
        newDividendTracker.excludeFromDividends(address(uniswapV2Router));

        emit UpdateDividendTracker(newAddress, address(dividendTracker));

        dividendTracker = newDividendTracker;
    }
    
    function updateUniswapV2Router(address newAddress) public onlyOwner {
        require(newAddress != address(uniswapV2Router), "DIPO: The router already has that address");
        emit UpdateUniswapV2Router(newAddress, address(uniswapV2Router));
        uniswapV2Router = IUniswapV2Router02(newAddress);
    }

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        require(_isExcludedFromFees[account] != excluded, "DIPO: Account is already the value of 'excluded'");
        _isExcludedFromFees[account] = excluded;

        emit ExcludeFromFees(account, excluded);
    }

    function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
        for(uint256 i = 0; i < accounts.length; i++) {
            _isExcludedFromFees[accounts[i]] = excluded;
        }

        emit ExcludeMultipleAccountsFromFees(accounts, excluded);
    }

    function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
        require(pair != uniswapV2Pair, "DIPO: The PancakeSwap pair cannot be removed from automatedMarketMakerPairs");

        _setAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        require(automatedMarketMakerPairs[pair] != value, "DIPO: Automated market maker pair is already set to that value");
        automatedMarketMakerPairs[pair] = value;

        if(value) {
            dividendTracker.excludeFromDividends(pair);
        }

        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function updateGasForProcessing(uint256 newValue) public onlyOwner {
        require(newValue >= 200000 && newValue <= 500000, "DIPO: gasForProcessing must be between 200,000 and 500,000");
        require(newValue != gasForProcessing, "DIPO: Cannot update gasForProcessing to same value");
        emit GasForProcessingUpdated(newValue, gasForProcessing);
        gasForProcessing = newValue;
    }

    function updateClaimWait(uint256 claimWait) external onlyOwner {
        dividendTracker.updateClaimWait(claimWait);
    }

    function getClaimWait() external view returns(uint256) {
        return dividendTracker.claimWait();
    }

    function getTotalDividendsDistributed() external view returns (uint256) {
        return dividendTracker.totalDividendsDistributed();
    }

    function isExcludedFromFees(address account) public view returns(bool) {
        return _isExcludedFromFees[account];
    }

    function withdrawableDividendOf(address account) public view returns(uint256) {
    	return dividendTracker.withdrawableDividendOf(account);
  	}

	function dividendTokenBalanceOf(address account) public view returns (uint256) {
		return dividendTracker.balanceOf(account);
	}

    function getAccountDividendsInfo(address account)
        external view returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256) {
        return dividendTracker.getAccount(account);
    }

	function getAccountDividendsInfoAtIndex(uint256 index)
        external view returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256) {
    	return dividendTracker.getAccountAtIndex(index);
    }

	function processDividendTracker(uint256 gas) external {
		(uint256 iterations, uint256 claims, uint256 lastProcessedIndex) = dividendTracker.process(gas);
		emit ProcessedDividendTracker(iterations, claims, lastProcessedIndex, false, gas, tx.origin);
    }

    function claim() external {
		dividendTracker.processAccount(msg.sender, false);
    }

    function getLastProcessedIndex() external view returns(uint256) {
    	return dividendTracker.getLastProcessedIndex();
    }

    function getNumberOfDividendTokenHolders() external view returns(uint256) {
        return dividendTracker.getNumberOfTokenHolders();
    }

    function getTradingIsEnabled() public view returns (bool) {
        //return block.timestamp >= tradingEnabledTimestamp;
        return tradingEnabled;
    }

    function sendToMarketing(uint256 tokens) private {
        uint256 initialBalance = address(this).balance;
         swapTokensForEth(tokens);
        uint256 Send = address(this).balance.sub(initialBalance);
         _marketingWallet.transfer(Send);
    }



    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        bool tradingIsEnabled = getTradingIsEnabled();

        // only whitelisted addresses can make transfers after the fixed-sale has started
        // and before the public presale is over
        if(!tradingIsEnabled) {
            require(canTransferBeforeTradingIsEnabled[from], "ZeusUSDT: This account cannot send tokens until trading is enabled");
        }

        if(amount == 0) {
            super._transfer(from, to, 0);
            return;
        }


		uint256 contractTokenBalance = balanceOf(address(this));
        
        bool canSwap = contractTokenBalance >= swapTokensAtAmount;

        if(
            tradingIsEnabled && 
            canSwap &&
            !swapping &&
            !automatedMarketMakerPairs[from] &&
            from != liquidityWallet &&
            to != liquidityWallet
        ) {
            swapping = true;

        
            uint256 marketingTokens = contractTokenBalance.mul(marketingFee).div(totalFees);
            sendToMarketing(marketingTokens);

            uint256 sellTokens = balanceOf(address(this));
            swapAndSendDividends(sellTokens);

            swapping = false;
        }


        bool takeFee = tradingIsEnabled && !swapping;

        // if any account belongs to _isExcludedFromFee account then remove the fee
        if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
            takeFee = false;
        }

        if(takeFee) {
        	uint256 fees = amount.mul(totalFees).div(100);


        	amount = amount.sub(fees);

            super._transfer(from, address(this), fees);
        }

        super._transfer(from, to, amount);

        try dividendTracker.setBalance(payable(from), balanceOf(from)) {} catch {}
        try dividendTracker.setBalance(payable(to), balanceOf(to)) {} catch {}

        if(!swapping) {
	    	uint256 gas = gasForProcessing;

	    	try dividendTracker.process(gas) returns (uint256 iterations, uint256 claims, uint256 lastProcessedIndex) {
	    		emit ProcessedDividendTracker(iterations, claims, lastProcessedIndex, true, gas, tx.origin);
	    	}
	    	catch {

	    	}
        }
    }

    function swapAndLiquify(uint256 tokens) private {
        // split the contract balance into halves
        uint256 half = tokens.div(2);
        uint256 otherHalf = tokens.sub(half);

        // capture the contract's current ETH balance.
        // this is so that we can capture exactly the amount of ETH that the
        // swap creates, and not make the liquidity event include any ETH that
        // has been manually sent to the contract
        uint256 initialBalance = address(this).balance;

        // swap tokens for ETH
        swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered

        // how much ETH did we just swap into?
        uint256 newBalance = address(this).balance.sub(initialBalance);

        // add liquidity to uniswap
        addLiquidity(otherHalf, newBalance);
        
        emit SwapAndLiquify(half, newBalance, otherHalf);
    }

    function swapTokensForEth(uint256 tokenAmount) private {

        
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
        
    }


    function swapTokensForPAXGToken(uint256 tokenAmount, address recipient) private {
       
        // generate the uniswap pair path of weth -> USDT
        address[] memory path = new address[](3);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        path[2] = PAXGToken;

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of USDT
            path,
            recipient,
            block.timestamp
        );
        
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // add the liquidity
       uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            liquidityWallet,
            block.timestamp
        );
        
    }

    function swapAndSendDividends(uint256 tokens) private {
        swapTokensForPAXGToken(tokens, address(this));
        uint256 dividends = IERC20(PAXGToken).balanceOf(address(this));
        bool success = IERC20(PAXGToken).transfer(address(dividendTracker), dividends);
        
        if (success) {
            dividendTracker.distributePAXGTokenDividends(dividends);
            emit SendDividends(tokens, dividends);
        }
    }
    
}

contract DIPODividendTracker is DividendPayingToken, Ownable {
    using SafeMath for uint256;
    using SafeMathInt for int256;
    using IterableMapping for IterableMapping.Map;

    IterableMapping.Map private tokenHoldersMap;
    uint256 public lastProcessedIndex;

    mapping (address => bool) public excludedFromDividends;

    mapping (address => uint256) public lastClaimTimes;

    uint256 public claimWait;
    uint256 public immutable minimumTokenBalanceForDividends;

    event ExcludeFromDividends(address indexed account);
    event ClaimWaitUpdated(uint256 indexed newValue, uint256 indexed oldValue);

    event Claim(address indexed account, uint256 amount, bool indexed automatic);

    constructor() public DividendPayingToken("DIPO_Dividend_Tracker", "DIPO_Dividend_Tracker") {
    	claimWait = 3600;
        minimumTokenBalanceForDividends = 10000 * (10**18); //must hold 10000+ tokens
    }

    function _transfer(address, address, uint256) internal override {
        require(false, "DIPO_Dividend_Tracker: No transfers allowed");
    }

    function withdrawDividend() public override {
        require(false, "DIPO_Dividend_Tracker: withdrawDividend disabled. Use the 'claim' function on the main ZeusUSDT contract.");
    }

    function excludeFromDividends(address account) external onlyOwner {
    	require(!excludedFromDividends[account]);
    	excludedFromDividends[account] = true;

    	_setBalance(account, 0);
    	tokenHoldersMap.remove(account);

    	emit ExcludeFromDividends(account);
    }

    function updateClaimWait(uint256 newClaimWait) external onlyOwner {
        require(newClaimWait >= 3600 && newClaimWait <= 86400, "DIPO_Dividend_Tracker: claimWait must be updated to between 1 and 24 hours");
        require(newClaimWait != claimWait, "DIPO_Dividend_Tracker: Cannot update claimWait to same value");
        emit ClaimWaitUpdated(newClaimWait, claimWait);
        claimWait = newClaimWait;
    }

    function getLastProcessedIndex() external view returns(uint256) {
    	return lastProcessedIndex;
    }

    function getNumberOfTokenHolders() external view returns(uint256) {
        return tokenHoldersMap.keys.length;
    }


    function getAccount(address _account)
        public view returns (
            address account,
            int256 index,
            int256 iterationsUntilProcessed,
            uint256 withdrawableDividends,
            uint256 totalDividends,
            uint256 lastClaimTime,
            uint256 nextClaimTime,
            uint256 secondsUntilAutoClaimAvailable) {
        account = _account;

        index = tokenHoldersMap.getIndexOfKey(account);

        iterationsUntilProcessed = -1;

        if(index >= 0) {
            if(uint256(index) > lastProcessedIndex) {
                iterationsUntilProcessed = index.sub(int256(lastProcessedIndex));
            }
            else {
                uint256 processesUntilEndOfArray = tokenHoldersMap.keys.length > lastProcessedIndex ?
                                                        tokenHoldersMap.keys.length.sub(lastProcessedIndex) :
                                                        0;


                iterationsUntilProcessed = index.add(int256(processesUntilEndOfArray));
            }
        }


        withdrawableDividends = withdrawableDividendOf(account);
        totalDividends = accumulativeDividendOf(account);

        lastClaimTime = lastClaimTimes[account];

        nextClaimTime = lastClaimTime > 0 ?
                                    lastClaimTime.add(claimWait) :
                                    0;

        secondsUntilAutoClaimAvailable = nextClaimTime > block.timestamp ?
                                                    nextClaimTime.sub(block.timestamp) :
                                                    0;
    }

    function getAccountAtIndex(uint256 index)
        public view returns (
            address,
            int256,
            int256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256) {
    	if(index >= tokenHoldersMap.size()) {
            return (0x0000000000000000000000000000000000000000, -1, -1, 0, 0, 0, 0, 0);
        }

        address account = tokenHoldersMap.getKeyAtIndex(index);

        return getAccount(account);
    }

    function canAutoClaim(uint256 lastClaimTime) private view returns (bool) {
    	if(lastClaimTime > block.timestamp)  {
    		return false;
    	}

    	return block.timestamp.sub(lastClaimTime) >= claimWait;
    }

    function setBalance(address payable account, uint256 newBalance) external onlyOwner {
    	if(excludedFromDividends[account]) {
    		return;
    	}

    	if(newBalance >= minimumTokenBalanceForDividends) {
            _setBalance(account, newBalance);
    		tokenHoldersMap.set(account, newBalance);
    	}
    	else {
            _setBalance(account, 0);
    		tokenHoldersMap.remove(account);
    	}

    	processAccount(account, true);
    }

    function process(uint256 gas) public returns (uint256, uint256, uint256) {
    	uint256 numberOfTokenHolders = tokenHoldersMap.keys.length;

    	if(numberOfTokenHolders == 0) {
    		return (0, 0, lastProcessedIndex);
    	}

    	uint256 _lastProcessedIndex = lastProcessedIndex;

    	uint256 gasUsed = 0;

    	uint256 gasLeft = gasleft();

    	uint256 iterations = 0;
    	uint256 claims = 0;

    	while(gasUsed < gas && iterations < numberOfTokenHolders) {
    		_lastProcessedIndex++;

    		if(_lastProcessedIndex >= tokenHoldersMap.keys.length) {
    			_lastProcessedIndex = 0;
    		}

    		address account = tokenHoldersMap.keys[_lastProcessedIndex];

    		if(canAutoClaim(lastClaimTimes[account])) {
    			if(processAccount(payable(account), true)) {
    				claims++;
    			}
    		}

    		iterations++;

    		uint256 newGasLeft = gasleft();

    		if(gasLeft > newGasLeft) {
    			gasUsed = gasUsed.add(gasLeft.sub(newGasLeft));
    		}

    		gasLeft = newGasLeft;
    	}

    	lastProcessedIndex = _lastProcessedIndex;

    	return (iterations, claims, lastProcessedIndex);
    }

    function processAccount(address payable account, bool automatic) public onlyOwner returns (bool) {
        uint256 amount = _withdrawDividendOfUser(account);

    	if(amount > 0) {
    		lastClaimTimes[account] = block.timestamp;
            emit Claim(account, amount, automatic);
    		return true;
    	}

    	return false;
    }


}

{
  "compilationTarget": {
    "DIPO.sol": "DIPO"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}