Inverse.Finance DAI to ETH Yield Token

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./math/SafeMathUint.sol";
import "./math/SafeMathInt.sol";

/// @title Dividend-Paying Token
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev A mintable ERC20 token that allows anyone to pay and distribute a target token
///  to token holders as dividends and allows token holders to withdraw their dividends.
///  Reference: the source code of PoWH3D: https://etherscan.io/address/0xB3775fB83F7D12A36E0475aBdD1FCA35c091efBe#code
contract DividendToken is ERC20 {
  using SafeMath for uint256;
  using SafeMathUint for uint256;
  using SafeMathInt for int256;
  using SafeERC20 for IERC20;
  
  IERC20 public target;

  // With `magnitude`, we can properly distribute dividends even if the amount of received target is small.
  // For more discussion about choosing the value of `magnitude`,
  //  see https://github.com/ethereum/EIPs/issues/1726#issuecomment-472352728
  uint256 constant internal magnitude = 2**128;

  uint256 internal magnifiedDividendPerShare;

  // About dividendCorrection:
  // If the token balance of a `_user` is never changed, the dividend of `_user` can be computed with:
  //   `dividendOf(_user) = dividendPerShare * balanceOf(_user)`.
  // When `balanceOf(_user)` is changed (via minting/burning/transferring tokens),
  //   `dividendOf(_user)` should not be changed,
  //   but the computed value of `dividendPerShare * balanceOf(_user)` is changed.
  // To keep the `dividendOf(_user)` unchanged, we add a correction term:
  //   `dividendOf(_user) = dividendPerShare * balanceOf(_user) + dividendCorrectionOf(_user)`,
  //   where `dividendCorrectionOf(_user)` is updated whenever `balanceOf(_user)` is changed:
  //   `dividendCorrectionOf(_user) = dividendPerShare * (old balanceOf(_user)) - (new balanceOf(_user))`.
  // So now `dividendOf(_user)` returns the same value before and after `balanceOf(_user)` is changed.
  mapping(address => int256) internal magnifiedDividendCorrections;
  mapping(address => uint256) internal withdrawnDividends;

  constructor(IERC20 target_, string memory name_, string memory symbol_, uint8 decimals_) ERC20(name_, symbol_) {
    _setupDecimals(decimals_);
    target = target_;
  }

  /// @notice Distributes target to token holders as dividends.
  /// @dev It reverts if the total supply of tokens is 0.
  /// It emits the `DividendsDistributed` event if the amount of received target is greater than 0.
  /// About undistributed target tokens:
  ///   In each distribution, there is a small amount of target not distributed,
  ///     the magnified amount of which is
  ///     `(amount * magnitude) % totalSupply()`.
  ///   With a well-chosen `magnitude`, the amount of undistributed target
  ///     (de-magnified) in a distribution can be less than 1 wei.
  ///   We can actually keep track of the undistributed target in a distribution
  ///     and try to distribute it in the next distribution,
  ///     but keeping track of such data on-chain costs much more than
  ///     the saved target, so we don't do that.
  function distributeDividends(uint amount) internal {
    require(totalSupply() > 0);
    require(amount > 0);

    magnifiedDividendPerShare = magnifiedDividendPerShare.add(
      (amount).mul(magnitude) / totalSupply()
    );

    target.safeTransferFrom(msg.sender, address(this), amount);

    emit DividendsDistributed(msg.sender, amount);
  }

  /// @notice Withdraws the target distributed to the sender.
  /// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn target is greater than 0.
  function withdrawDividend(address user) internal {
    uint256 _withdrawableDividend = withdrawableDividendOf(user);
    if (_withdrawableDividend > 0) {
      withdrawnDividends[user] = withdrawnDividends[user].add(_withdrawableDividend);
      emit DividendWithdrawn(user, _withdrawableDividend);
      target.safeTransfer(user, _withdrawableDividend);
    }
  }

  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function dividendOf(address _owner) public view returns(uint256) {
    return withdrawableDividendOf(_owner);
  }

  /// @notice View the amount of dividend in wei that an address can withdraw.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` can withdraw.
  function withdrawableDividendOf(address _owner) internal view returns(uint256) {
    return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
  }

  /// @notice View the amount of dividend in wei that an address has withdrawn.
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has withdrawn.
  function withdrawnDividendOf(address _owner) public view returns(uint256) {
    return withdrawnDividends[_owner];
  }


  /// @notice View the amount of dividend in wei that an address has earned in total.
  /// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
  /// = (magnifiedDividendPerShare * balanceOf(_owner) + magnifiedDividendCorrections[_owner]) / magnitude
  /// @param _owner The address of a token holder.
  /// @return The amount of dividend in wei that `_owner` has earned in total.
  function accumulativeDividendOf(address _owner) public view returns(uint256) {
    return magnifiedDividendPerShare.mul(balanceOf(_owner)).toInt256Safe()
      .add(magnifiedDividendCorrections[_owner]).toUint256Safe() / magnitude;
  }

  /// @dev Internal function that transfer tokens from one address to another.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param from The address to transfer from.
  /// @param to The address to transfer to.
  /// @param value The amount to be transferred.
  function _transfer(address from, address to, uint256 value) internal override {
    super._transfer(from, to, value);

    int256 _magCorrection = magnifiedDividendPerShare.mul(value).toInt256Safe();
    magnifiedDividendCorrections[from] = magnifiedDividendCorrections[from].add(_magCorrection);
    magnifiedDividendCorrections[to] = magnifiedDividendCorrections[to].sub(_magCorrection);
  }

  /// @dev Internal function that mints tokens to an account.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param account The account that will receive the created tokens.
  /// @param value The amount that will be created.
  function _mint(address account, uint256 value) internal override {
    super._mint(account, value);

    magnifiedDividendCorrections[account] = magnifiedDividendCorrections[account]
      .sub( (magnifiedDividendPerShare.mul(value)).toInt256Safe() );
  }

  /// @dev Internal function that burns an amount of the token of a given account.
  /// Update magnifiedDividendCorrections to keep dividends unchanged.
  /// @param account The account whose tokens will be burnt.
  /// @param value The amount that will be burnt.
  function _burn(address account, uint256 value) internal override {
    super._burn(account, value);

    magnifiedDividendCorrections[account] = magnifiedDividendCorrections[account]
      .add( (magnifiedDividendPerShare.mul(value)).toInt256Safe() );
  }

  /// @dev This event MUST emit when target is distributed to token holders.
  /// @param from The address which sends target to this contract.
  /// @param weiAmount The amount of distributed target in wei.
  event DividendsDistributed(
    address indexed from,
    uint256 weiAmount
  );

  /// @dev This event MUST emit when an address withdraws their dividend.
  /// @param to The address which withdraws target from this contract.
  /// @param weiAmount The amount of withdrawn target in wei.
  event DividendWithdrawn(
    address indexed to,
    uint256 weiAmount
  );
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

interface IWETH is IERC20 {
    function withdraw(uint wad) external;
}

import "./Vault.sol";

contract EthVault is Vault {
    using SafeMath for uint256;
    using SafeERC20 for IWETH;

    constructor(IERC20Detailed underlying_, IERC20 reward_, address harvester_, string memory name_, string memory symbol_)
        Vault(underlying_, reward_, harvester_, name_, symbol_) {}


    receive() external payable {
        require(msg.sender == address(target));
    }

    function withdrawDividendETH(address user) internal {
        uint256 _withdrawableDividend = withdrawableDividendOf(user);
        if (_withdrawableDividend > 0) {
            withdrawnDividends[user] = withdrawnDividends[user].add(_withdrawableDividend);
            emit DividendWithdrawn(user, _withdrawableDividend);
            IWETH(address(target)).withdraw(_withdrawableDividend);
            payable(user).transfer(_withdrawableDividend);
        }
    }

    function claimETH() public {
        withdrawDividendETH(msg.sender);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

interface IStrat {
    function invest() external; // underlying amount must be sent from vault to strat address before
    function divest(uint amount) external; // should send requested amount to vault directly, not less or more
    function calcTotalValue() external returns (uint);
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IERC20Detailed is IERC20 {
    function decimals() external view returns (uint8);
}

interface IVault {
    function harvest(uint amount) external returns (uint afterFee);
    function distribute(uint amount) external;
    function underlying() external view returns (IERC20Detailed);
    function target() external view returns (IERC20);
    function owner() external view returns (address);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../GSN/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

pragma solidity 0.7.3;

/**
 * @title SafeMathInt
 * @dev Math operations with safety checks that revert on error
 * @dev SafeMath adapted for int256
 * Based on code of  https://github.com/RequestNetwork/requestNetwork/blob/master/packages/requestNetworkSmartContracts/contracts/base/math/SafeMathInt.sol
 */
library SafeMathInt {
  function mul(int256 a, int256 b) internal pure returns (int256) {
    // Prevent overflow when multiplying INT256_MIN with -1
    // https://github.com/RequestNetwork/requestNetwork/issues/43
    require(!(a == - 2**255 && b == -1) && !(b == - 2**255 && a == -1));

    int256 c = a * b;
    require((b == 0) || (c / b == a));
    return c;
  }

  function div(int256 a, int256 b) internal pure returns (int256) {
    // Prevent overflow when dividing INT256_MIN by -1
    // https://github.com/RequestNetwork/requestNetwork/issues/43
    require(!(a == - 2**255 && b == -1) && (b > 0));

    return a / b;
  }

  function sub(int256 a, int256 b) internal pure returns (int256) {
    require((b >= 0 && a - b <= a) || (b < 0 && a - b > a));

    return a - b;
  }

  function add(int256 a, int256 b) internal pure returns (int256) {
    int256 c = a + b;
    require((b >= 0 && c >= a) || (b < 0 && c < a));
    return c;
  }

  function toUint256Safe(int256 a) internal pure returns (uint256) {
    require(a >= 0);
    return uint256(a);
  }
}

pragma solidity 0.7.3;

/**
 * @title SafeMathUint
 * @dev Math operations with safety checks that revert on error
 */
library SafeMathUint {
  function toInt256Safe(uint256 a) internal pure returns (int256) {
    int256 b = int256(a);
    require(b >= 0);
    return b;
  }
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

import "@openzeppelin/contracts/math/SafeMath.sol";

contract Timelock {
    using SafeMath for uint;

    event NewAdmin(address indexed newAdmin);
    event NewPendingAdmin(address indexed newPendingAdmin);
    event NewDelay(uint indexed newDelay);
    event CancelTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature,  bytes data, uint eta);
    event ExecuteTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature,  bytes data, uint eta);
    event QueueTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);

    uint public constant GRACE_PERIOD = 14 days;
    uint public constant MINIMUM_DELAY = 1 days;
    uint public constant MAXIMUM_DELAY = 30 days;

    address public admin;
    address public pendingAdmin;
    uint public delay;

    mapping (bytes32 => bool) public queuedTransactions;


    constructor(address admin_, uint delay_) {
        require(delay_ >= MINIMUM_DELAY, "Timelock::constructor: Delay must exceed minimum delay.");
        require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");

        admin = admin_;
        delay = delay_;
    }

    receive() external payable { }

    function setDelay(uint delay_) public {
        require(msg.sender == address(this), "Timelock::setDelay: Call must come from Timelock.");
        require(delay_ >= MINIMUM_DELAY, "Timelock::setDelay: Delay must exceed minimum delay.");
        require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");
        delay = delay_;

        emit NewDelay(delay);
    }

    function acceptAdmin() public {
        require(msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin.");
        admin = msg.sender;
        pendingAdmin = address(0);

        emit NewAdmin(admin);
    }

    function setPendingAdmin(address pendingAdmin_) public {
        require(msg.sender == address(this), "Timelock::setPendingAdmin: Call must come from Timelock.");
        pendingAdmin = pendingAdmin_;

        emit NewPendingAdmin(pendingAdmin);
    }

    function queueTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public returns (bytes32) {
        require(msg.sender == admin, "Timelock::queueTransaction: Call must come from admin.");
        require(eta >= getBlockTimestamp().add(delay), "Timelock::queueTransaction: Estimated execution block must satisfy delay.");

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        queuedTransactions[txHash] = true;

        emit QueueTransaction(txHash, target, value, signature, data, eta);
        return txHash;
    }

    function cancelTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public {
        require(msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin.");

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        queuedTransactions[txHash] = false;

        emit CancelTransaction(txHash, target, value, signature, data, eta);
    }

    function executeTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public payable returns (bytes memory) {
        require(msg.sender == admin, "Timelock::executeTransaction: Call must come from admin.");

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        require(queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued.");
        require(getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock.");
        require(getBlockTimestamp() <= eta.add(GRACE_PERIOD), "Timelock::executeTransaction: Transaction is stale.");

        queuedTransactions[txHash] = false;

        bytes memory callData;

        if (bytes(signature).length == 0) {
            callData = data;
        } else {
            callData = abi.encodePacked(bytes4(keccak256(bytes(signature))), data);
        }

        // solium-disable-next-line security/no-call-value
        (bool success, bytes memory returnData) = target.call{value:value}(callData);
        require(success, "Timelock::executeTransaction: Transaction execution reverted.");

        emit ExecuteTransaction(txHash, target, value, signature, data, eta);

        return returnData;
    }

    function getBlockTimestamp() internal view returns (uint) {
        // solium-disable-next-line security/no-block-members
        return block.timestamp;
    }
}

//SPDX-License-Identifier: Unlicense
pragma solidity 0.7.3;

import "./IStrat.sol";
import "./IVault.sol";
import "./DividendToken.sol";
import "./Timelock.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";

contract Vault is Ownable, Pausable, DividendToken {
    using SafeMath for uint256;
    using SafeERC20 for IERC20Detailed;

    IERC20Detailed public underlying;
    IStrat public strat;
    address public harvester;
    uint constant MAX_FEE = 10000;
    uint public performanceFee = 0; // 0% of profit
    // if depositLimit = 0 then there is no deposit limit
    uint public depositLimit;
    uint public lastDistribution;
    Timelock public timelock;

    modifier onlyHarvester {
        require(msg.sender == harvester);
        _;
    }

    constructor(IERC20Detailed underlying_, IERC20 reward_, address harvester_, string memory name_, string memory symbol_)
    DividendToken(reward_, name_, symbol_, underlying_.decimals())
    {
        underlying = underlying_;
        harvester = harvester_;
        depositLimit = 20000 * (10**underlying_.decimals()); // 20k initial deposit limit
        timelock = new Timelock(msg.sender, 2 days);
        _pause(); // paused until a strategy is connected
    }

    function calcTotalValue() public returns (uint underlyingAmount) {
        return strat.calcTotalValue();
    }

    function deposit(uint amount) public whenNotPaused {
        if(depositLimit > 0) { // if deposit limit is 0, then there is no deposit limit
            require(totalSupply().add(amount) <= depositLimit);
        }
        underlying.safeTransferFrom(msg.sender, address(strat), amount);
        strat.invest();
        _mint(msg.sender, amount);
    }

    function withdraw(uint amount) public {
        _burn(msg.sender, amount);
        strat.divest(amount);
        underlying.safeTransfer(msg.sender, amount);
    }

    function underlyingYield() public returns (uint) {
        return calcTotalValue().sub(totalSupply());
    }

    function unclaimedProfit(address user) public view returns (uint256) {
        return withdrawableDividendOf(user);
    }

    function claim() public {
        withdrawDividend(msg.sender);
    }

    // Used to claim on behalf of certain contracts e.g. Uniswap pool
    function claimOnBehalf(address recipient) public {
        require(msg.sender == harvester || msg.sender == owner());
        withdrawDividend(recipient);
    }

    function pauseDeposits(bool trigger) public onlyOwner {
        if(trigger) _pause();
        else _unpause();
    }

    function changeHarvester(address harvester_) public onlyOwner {
        harvester = harvester_;
    }

    function changePerformanceFee(uint fee_) public onlyOwner {
        require(fee_ <= MAX_FEE);
        performanceFee = fee_;
    }

    // The owner has to wait 2 days to confirm changing the strat.
    // This protects users from an upgrade to a malicious strategy
    // Users must watch the timelock contract on Etherscan for any transactions
    function setStrat(IStrat strat_, bool force) public {
        if(address(strat) != address(0)) {
            require(msg.sender == address(timelock));
            uint prevTotalValue = strat.calcTotalValue();
            strat.divest(prevTotalValue);
            underlying.safeTransfer(address(strat_), underlying.balanceOf(address(this)));
            strat_.invest();
            if(!force) {
                require(strat_.calcTotalValue() >= prevTotalValue);
                require(strat.calcTotalValue() == 0);
            }
        } else {
            require(msg.sender == owner());
            _unpause();
        }
        strat = strat_;
    }

    // if limit == 0 then there is no deposit limit
    function setDepositLimit(uint limit) public onlyOwner {
        depositLimit = limit;
    }

    // Any tokens (other than the target) that are sent here by mistake are recoverable by the owner
    function sweep(address _token) external onlyOwner {
        require(_token != address(target));
        IERC20(_token).transfer(owner(), IERC20(_token).balanceOf(address(this)));
    }

    function harvest(uint amount) public onlyHarvester returns (uint afterFee) {
        require(amount <= underlyingYield(), "Amount larger than generated yield");
        strat.divest(amount);
        if(performanceFee > 0) {
            uint fee = amount.mul(performanceFee).div(MAX_FEE);
            afterFee = amount.sub(fee);
            underlying.safeTransfer(owner(), fee);
        } else {
            afterFee = amount;
        }
        underlying.safeTransfer(harvester, afterFee);
    }

    function distribute(uint amount) public onlyHarvester {
        distributeDividends(amount);
        lastDistribution = block.timestamp;
    }

}

{
  "compilationTarget": {
    "contracts/EthVault.sol": "EthVault"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}